So far I always found answers to all my questions here without ever asking. This forum is awsome! Thanks to everyone here doing good work!
My problem: I have the European version of the Honor View 10. I opened bootloader, I installed the Magisk correctly with the 15.4 version, worked all fine. (thank you topjohnwu)
Then MY mistake ... I wanted to install Xposed Installer. I was not concentrated that moment and took the wrong version! From my other Honor phone (android 6.0, version 89, arm64). Absolutely stupid!
Phone restarted ... bootloop ... and goes into eRecovery. I tried everything I could there, clear dalvik cache, factory reset. > no change!
Then I thought ok, connect to PC, safe mode ... adb ... but no success. adb devices brings no result. PC does not find my phone anymore. I hoped I could get into my phone by connecting with PC, but it seems I am unable. So I can not help myself this way.
Next try was to force the phone to update with SD card. I only found asian update software, but I already did not care. I want to save my phone. Update starts, but after 5% it stops, update fail.
Now I hope that someone here can help. I have no idea what else I could do. Best regards, Markus
mark_at said:
So far I always found answers to all my questions here without ever asking. This forum is awsome! Thanks to everyone here doing good work!
My problem: I have the European version of the Honor View 10. I opened bootloader, I installed the Magisk correctly with the 15.4 version, worked all fine. (thank you topjohnwu)
Then MY mistake ... I wanted to install Xposed Installer. I was not concentrated that moment and took the wrong version! From my other Honor phone (android 6.0, version 89, arm64). Absolutely stupid!
Phone restarted ... bootloop ... and goes into eRecovery. I tried everything I could there, clear dalvik cache, factory reset. > no change!
Then I thought ok, connect to PC, safe mode ... adb ... but no success. adb devices brings no result. PC does not find my phone anymore. I hoped I could get into my phone by connecting with PC, but it seems I am unable. So I can not help myself this way.
Next try was to force the phone to update with SD card. I only found asian update software, but I already did not care. I want to save my phone. Update starts, but after 5% it stops, update fail.
Now I hope that someone here can help. I have no idea what else I could do. Best regards, Markus
Click to expand...
Click to collapse
Did you already try ro flash ramdisk and system sith stock images via fastboot?
alohahe3000 said:
Did you already try ro flash ramdisk and system sith stock images via fastboot?
Click to expand...
Click to collapse
I would flash anything ... if I could! That is my problem at the moment and I can not solve it.
When I start phone I get into Huawei eRecovery after two tries to boot > does not help!
When I connect to PC > phone gets not detected! (during boot try it gets connected shortly ... but then gets disconnected after some seconds, in between I can not get into phone via PC)
So when I would want to use fastboot .... not possible because of that issue. I tried to connect in fastboot mode ... but no difference. Actually I do not understand why I can not connect to PC anymore!
The only way I can imagine now is flash or update something via SD card. I tried with asian update.zip, but it will only go to 5% .... and then ends.
But to be honest ... I am not very optimistic about finding any solution. I think only some very smart pro from this site might have an idea. But not sure if these guys read questions about bootloops.
mark_at said:
Next try was to force the phone to update with SD card.
Click to expand...
Click to collapse
Try to flash via Fastboot the stock rom... do a full wipe and reboot.
here the link to the stock ROM:
https://mega.nz/#!W9hjiTgZ!_ZGq7V83bkWPF_Ue7_c41wVXNrQ_YjnsQUxRS0_MevU
Taobaibai said:
Try to flash via Fastboot the stock rom... do a full wipe and reboot.
Click to expand...
Click to collapse
Thanks for the link. But how can I flash via fastboot when my phone is not detected from the PC? That is my main problem at the moment!
That is why I wrote about all things I had tried already. And being unable to connect to the computer is really worrying me!
"adb devices" will not find my phone!
mark_at said:
Thanks for the link. But how can I flash via fastboot when my phone is not detected from the PC? That is my main problem at the moment!
That is why I wrote about all things I had tried already. And being unable to connect to the computer is really worrying me!
"adb devices" will not find my phone!
Click to expand...
Click to collapse
You have to boot into fastboot modus. When booting, push power and Volume down button. A white screen appears if device is connected with PC.
Then try "fastboot devices". If your device is displayed, you can flash with "fastboot flash" system image. Stock system.img download link can be found in AOSP thread, second post.
alohahe3000 said:
You have to boot into fastboot modus. When booting, push power and Volume down button. A white screen appears if device is connected with PC.
Then try "fastboot devices". If your device is displayed, you can flash with "fastboot flash" system image.
Click to expand...
Click to collapse
Exactly
alohahe3000 said:
Stock system.img download link can be found in AOSP thread, second post.
Click to expand...
Click to collapse
Or just use my link. I copied it from the AOSP Thread
I managed to get my phone displayed when I entered fastboot devices.
And I managed to flash the img!! Hurra !!
Thank you very very much to everyone here helping me ...
I thought that nothing would work because when I typed "abd devices" nothing happened. But when I typed "fastboot devices" the phone was there.
mark_at said:
I managed to get my phone displayed when I entered fastboot devices.
And I managed to flash the img!! Hurra !!
Thank you very very much to everyone here helping me ...
I thought that nothing would work because when I typed "abd devices" nothing happened. But when I typed "fastboot devices" the phone was there.
Click to expand...
Click to collapse
It wasn't so difficult.
Viel Spaß mit dem Smartphone!!!
one more thing I have to add:
after flashing the system.img from the link above .... I have FRP lock .... that was not before.
does it mean I have to relock my bootloader and then unlock it once again? In some other thread I found that information.
mark_at said:
one more thing I have to add:
after flashing the system.img from the link above .... I have FRP lock .... that was not before.
does it mean I have to relock my bootloader and then unlock it once again? In some other thread I found that information.
Click to expand...
Click to collapse
and now I relocked bootloader .... and guess what? bootloop again ... and I can not unlock it again, because I did not think about enable OEM unlock! It says necessary to unlock FRP before.
I am terribly sorry for being such an idiot!!
mark_at said:
and now I relocked bootloader .... and guess what? bootloop again ... and I can not unlock it again, because I did not think about enable OEM unlock! It says necessary to unlock FRP before.
I am terribly sorry for being such an idiot!!
Click to expand...
Click to collapse
Never ever relock bootloader untill you have a backup plan. We have dload method till emui 7 buut not sure on EMUI 8 so can't suggest you anything at the moment. Someone played with EMUI 8 can guide you through it.
I understand that I was not allowed to relock bootloader! I feel awful and stupid about it ... believe me!
I was able to erase FRP with HCU client from DC Phoenix.
After that I was in phone again
And afterwards I could open the bootloader again.
Halleluja!!
Thanks for everyone's help here ...
Related
Something went wrong while flashing CWM on my TF300T. It showed successful in cmd window on pc, but the statusbar on my pad kept showing 100% but nothing happend (no message or automaticly rebooting). After waiting 10 minutes or so, I turned off the device and restarted it.
Now the device is not started up anymore, keeps stuck on message:
"The Device is Unlocked".
When I try te start it up in Fastboot ( pwr+vol down) the screen get stuck on message:
"The Device is Unlocked.
Android cardhu-user bootloader <2.10 e> released by "ww_epad-9.4.3.29-20120511" A03
Checking for android ota recovery
Booting recovery kernel image"
Now the pad is not starting up the ROM and I can't get in fastboot mode anymore.
The solutions given in other treads about a simular problem, you need to put your pad into USB mode.
But that is not posible anymore.
Is there any other solution for this problem??
Thanks guy's
problem
I also have the same brick .... like it ....
Hello,
me too...
Tablet starts always automatically into CWM recovery.
Fastboot and ADB doesnt work either...
Could it be ADB isnt working because debugging mode isnt activated?
But how can I change without a working android?
Is there someone out there who can help me out of this problem?
Or is RMA the only solution?
But I dont want to send my transformer to asus so they can change the motherboard. Its only a software problem...
Can someone help me? Please
Give it what it is looking for and hope for the best. Stock update ( ww_epad-9.4.3.29-20120511 ) If when plugged into pc you have access to internal sdcard put it there, if not put it on external sdcard and reboot unit. If that does not load update try to get into fastboot as you mention above maybe it will install from there since it tells you ( Checking for android ota recovery ).
Good Luck!
If you downloaded the file from asus you will need to unzip once and still have a zip but slightly different name!
tobdaryl said:
Give it what it is looking for and hope for the best. Stock update ( ww_epad-9.4.3.29-20120511 ) If when plugged into pc you have access to internal sdcard put it there, if not put it on external sdcard and reboot unit. If that does not load update try to get into fastboot as you mention above maybe it will install from there since it tells you ( Checking for android ota recovery ).
Good Luck!
If you downloaded the file from asus you will need to unzip once and still have a zip but slightly different name!
Click to expand...
Click to collapse
Hello tobdaryl,
thanks for your answer!
Unfortunately I dont have access to internal sdcard... also I cant get into fastboot mode...
I think ADB could help, but I cant get ADB to work. I have to activate usb debugging, right?
But how could I do without starting Android?
Droid_1 said:
Hello tobdaryl,
thanks for your answer!
Unfortunately I dont have access to internal sdcard... also I cant get into fastboot mode...
I think ADB could help, but I cant get ADB to work. I have to activate usb debugging, right?
But how could I do without starting Android?
Click to expand...
Click to collapse
place it on external sdcard if you can't access internal. if this works you don't need adb or fastboot. we are trying to let your unit update for you and clear your problem. as far as fastboot I'm only suggesting do as you said about trying to go into fastboot as when you received the message about update.
sounds harder than it is.
place update on external sdcard. reboot, if no love reboot into fastboot as when you received update message. at that point we hope your unit will auto install the update for you.
time is all you might loose.
Good Luck!:good:
tobdaryl said:
place it on external sdcard if you can't access internal. if this works you don't need adb or fastboot. we are trying to let your unit update for you and clear your problem. as far as fastboot I'm only suggesting do as you said about trying to go into fastboot as when you received the message about update.
sounds harder than it is.
place update on external sdcard. reboot, if no love reboot into fastboot as when you received update message. at that point we hope your unit will auto install the update for you.
time is all you might loose.
Good Luck!:good:
Click to expand...
Click to collapse
Hey tobdaryl,
my transformer didnt recognized the external sd...
But I made it out of the cwm loop.
Nonetheless many thanks for your help! :good:
Droid_1 said:
Hey tobdaryl,
my transformer didnt recognized the external sd...
But I made it out of the cwm loop.
Nonetheless many thanks for your help! :good:
Click to expand...
Click to collapse
Great!!!
Could you give quick info how you recovered? Several others are waiting for resolve same problem.
tobdaryl said:
Great!!!
Could you give quick info how you recovered? Several others are waiting for resolve same problem.
Click to expand...
Click to collapse
Sorry, I forgot to post the link
http://forum.xda-developers.com/showthread.php?p=32787029#post32787029
Droid_1 said:
Sorry, I forgot to post the link
http://forum.xda-developers.com/showthread.php?p=32787029#post32787029
Click to expand...
Click to collapse
Thanks for sharing and taking the time to create a thread for others to use.
Good Luck!
Hi,
I have the honor 8 FRD-Al00 (chinese) only 2 days .
The phone ask to update the emui, and i did but now the phone is stock in erecovery mode when ask to download the latest version and recovery via wifi but fail every time.
I try to reset to fabric settings but don´t work.
i don´t know what happen and i don´t know what to do anymore.
Please anyone can help me?
Thanks
Rommco05 said:
Where you buy phone? You have warranty?
Click to expand...
Click to collapse
is a gift, but i know is from gearbest but if i can resolve the problem here is better than send the phone to chine and all the process.
Rommco05 said:
hm another bad situation. For your model isn't (or I don't know where) full firmware which can be useful. Try this, install HiSuite to PC and here is one section to repair phone, follow instruction in this program.
edit: try reset your wifi setting, setup for short without possword and try again download via eRecovery latest version
Click to expand...
Click to collapse
i have try the two methods but don´t work. via wifi fails everytime. via hisuite the recovey said the phone is not supported
Rommco05 said:
Fastboot recognized phone? If yes which Android you have last one? You can try unlock bootloader and flash custom recovery TWRP and after custom rom, thats maybe can help but warranty will be gone after amd I really don't know what happened after unlocking bootloader
Click to expand...
Click to collapse
you want to know if i can enter in menu fastboot? power and volume down key? yes and said Phone locked Frp lock. the android in the begin are 7.0 but after this happen i try to reset to fabric so now i don´t know.
Rommco05 said:
FRP lock and in HiSuite isn't option rollback?
edit: check this http://cn.club.vmall.com/thread-11316965-1-1.html
Click to expand...
Click to collapse
in hisuite the only option is system recovery but the phone is not supported
Rommco05 said:
Sorry man I think you must use warranty or some other member have more info like me
Click to expand...
Click to collapse
Thanks for try to help me.
If anyone else knows how to help me please let me know.
And i continue to investigate and if i know a solution i post here for others with the same problem.
Do you have unlocked bootloadrr
venugopalu007 said:
Do you have unlocked bootloadrr
Click to expand...
Click to collapse
no, i have made anything to the phone
i manage to boot the phone but now is in startup menu to choose the language and so on, but in loop, when i finish with the finger print he go to the first step. anyone can help me?
Rommco05 said:
ufff, factory reset in stock recovery? Or try again repeat setup
edit: how you fix boot to ROM?
Click to expand...
Click to collapse
i made the factory reset but the phone is stuck in startup. don´t exit the startup
i have some firmwares for this and i try lol if i can make this to work right i make here my all processe and links for everyone. but know i'm stuck on this
Rommco05 said:
It is Nougat or Marshmallow?
Click to expand...
Click to collapse
Marshmallow
Rommco05 said:
Again flash ROM via dload
Click to expand...
Click to collapse
i made but is the same
MagicMinds said:
i manage to boot the phone but now is in startup menu to choose the language and so on, but in loop, when i finish with the finger print he go to the first step. anyone can help me?
Click to expand...
Click to collapse
hold a moment , do you use VOLTE based Sim??
Honor 8 FRD-AL00 Briked
Hi I have a problem also with honor 8 with rom FRD-AL00, I unlocked the phone I installed the twrp recovery while installing the rom eu L09 the smartphone turned off black screen but it was a fastboot, i restored with the original ROM with DC -Phoenix everything ok but with android test, later because I'm stubborn, I tried to flash the rom L09 with DC_Phoenix successfully the L09 but I found them all changed zero and also the S / N, I tried several times to reflash with the Original rom but at some point it is briked the phone lights up alone when it is loaded and then comes into sdcard recovery but always with 5% and software install failed, even without SDcard inserted, does not vieve recognized by the PC, does not enter In fastboot, the PC only recognizes it when it's on the software install failed screen with the entry (Linux File-CD Gadget USB Device) this is the only way to connect to the computer. I also tried all the options with volume and power buttons but nothing. Looking for help as I can solve it?
Thank you!
bugsbunny69 said:
Hi I have a problem also with honor 8 with rom FRD-AL00, I unlocked the phone I installed the twrp recovery while installing the rom eu L09 the smartphone turned off black screen but it was a fastboot, i restored with the original ROM with DC -Phoenix everything ok but with android test, later because I'm stubborn, I tried to flash the rom L09 with DC_Phoenix successfully the L09 but I found them all changed zero and also the S / N, I tried several times to reflash with the Original rom but at some point it is briked the phone lights up alone when it is loaded and then comes into sdcard recovery but always with 5% and software install failed, even without SDcard inserted, does not vieve recognized by the PC, does not enter In fastboot, the PC only recognizes it when it's on the software install failed screen with the entry (Linux File-CD Gadget USB Device) this is the only way to connect to the computer. I also tried all the options with volume and power buttons but nothing. Looking for help as I can solve it?
Thank you!
Click to expand...
Click to collapse
Are you able to flash twrp?
Unfortunately, I can not get in any way to restart with recovery from SDcard but it does not recognize any firmware stops at 5% with the following message (software install failed).
thank you!
Rommco05 said:
U can boot to fastboot, if yes which status have FRP and PHONE are both unlocked?
Click to expand...
Click to collapse
No! I have already explained it does not enter fastboot and is not recognized by the PC, the only way is sd card but I tried various firmware stops at 5% even seza sd card.
When it enters sdcard recovery mode and connects to the PC it is reconnected in this way as a CDROM (linux file-cd gadget usb device).
Thank you!
Rommco05 said:
I don't know what next, leave him again discharged because u need fastboot and in recognise phone, if u can't boot to fastboot u can't do anything this a serious problem
Click to expand...
Click to collapse
I know I just have to try to give it back, hoping it's a guarantee with the Chinese people, I've already made a complaint that after two days the smartphone gave me problems, but the support office opens on 28/8.
Thanks for everything!
I have honor 8 al00 . And the same thing happens to me. But you just need to put the firmeware on the sd card and start it from the bootloader.
if you need help send me a message
I need help ;-;
gagi92bb said:
I have honor 8 al00 . And the same thing happens to me. But you just need to put the firmeware on the sd card and start it from the bootloader.
if you need help send me a message
Click to expand...
Click to collapse
I have a honor 8 al00, i can't restore ;-;
Hi everyone!
Well guys, sorry to bring this subject on thread again (because this forum has a lot of guides to solve this problem).
But I'm without hope with my phone at this moment.
Let me tell you guys my sad story...
I have an Oneplus 6 since december 2018, and never, NEVER, tried to use any modification on my phone.
I am from Brazil (so sorry for my bad english =] ), and here we CANNOT use Oneplus Support services (I've tried but only received the response "sorry I cannot help you on your country"), so because of this, I've decided to never apply any modification to avoid problems.
This week after a simple reboot my OP6 started with "Qualcomm CrashDump" error and my despair begins.
I'm not able to enter on Fastboot Mode. When I try, the systems attempt to boot (the fastboot mode logo appears) and fall down into crash again.
I'm not able to enter on Recovery Mode either. This method shows nothing, only black screen and after some time the crash screen comes again.
I do not have Bootloader unlocked too.
Any suggestion to use TWRP via fastboot.exe or ADB are useless, because I cant make the connection. At least I think that is impossible because the 'adb devices' command does not find the device.
I followed a lot of guides from XDA to solve my problem, including the Mega Unbrick Thread.
I already downloaded at least 8 different versions of msmdownloadtool in consecutive attempts of unbrick my phone. Nothing really helps.
The most weird situation is that msmDownlodTool can finish the proccess with success. The driver installation is working... everything seens OK using the tool but my phone does not revive
Someone have a suggestion for me?
Any suggestion, tool or alternative method is welcome in my actual situation.
Sorry if I posted at wrong local, just tell me and I can fix if necessary.
Thanks in advance to all of you guys.
Did you try msm download tool? If not, nead that thread and good luck
whizeguy said:
Did you try msm download tool? If not, nead that thread and good luck
Click to expand...
Click to collapse
Hi!
Thanks for your reply, but I think you do not read my entire post
As I said, i've already tried at least 8 different versions of msmDownloadTool.
If you have any other suggestion, I'll appreciate.
so you can't boot into fastbootmode anymore?
Had the same problem once before and solved it by flashing the correct twrp by fastboot
EarthquakeXS said:
so you can't boot into fastbootmode anymore?
Had the same problem once before and solved it by flashing the correct twrp by fastboot
Click to expand...
Click to collapse
Yes, I am unable to enter into Fastboot Mode.
When I try, the logo saying "fastboot" appears, but after 4 seconds, the systems stucks on CrashDump error screen again.
That way my PC cannot find my phone with ADB or FASTBOOT commands.
The only tool that works is msmDownloadTool, but even with a success run with that tool, my system does not start and stills under CrashDump error.
I was thinking if exists some version of msmDownloadTool that justs restore the fastboot and unlock bootloader with brute force.
Thats my last hope
hello. heres what u need to do. download miracle kraked version. hold volume+ and - key simultaneously.
go to device manager in pc. look for port expand it and u should see qualcomm Qloader.
now use miracle under qualcomm tab select patch and flash!!
sanaulla jauhar said:
hello. heres what u need to do. download miracle kraked version. hold volume+ and - key simultaneously.
go to device manager in pc. look for port expand it and u should see qualcomm Qloader.
now use miracle under qualcomm tab select patch and flash!!
Click to expand...
Click to collapse
Hi!
Can you please provide some link to this tool?
Thanks for your help!
mikesmarcos said:
Hi everyone!
Well guys, sorry to bring this subject on thread again (because this forum has a lot of guides to solve this problem).
But I'm without hope with my phone at this moment.
Let me tell you guys my sad story...
I have an Oneplus 6 since december 2018, and never, NEVER, tried to use any modification on my phone.
I am from Brazil (so sorry for my bad english =] ), and here we CANNOT use Oneplus Support services (I've tried but only received the response "sorry I cannot help you on your country"), so because of this, I've decided to never apply any modification to avoid problems.
This week after a simple reboot my OP6 started with "Qualcomm CrashDump" error and my despair begins.
I'm not able to enter on Fastboot Mode. When I try, the systems attempt to boot (the fastboot mode logo appears) and fall down into crash again.
I'm not able to enter on Recovery Mode either. This method shows nothing, only black screen and after some time the crash screen comes again.
I do not have Bootloader unlocked too.
Any suggestion to use TWRP via fastboot.exe or ADB are useless, because I cant make the connection. At least I think that is impossible because the 'adb devices' command does not find the device.
I followed a lot of guides from XDA to solve my problem, including the Mega Unbrick Thread.
I already downloaded at least 8 different versions of msmdownloadtool in consecutive attempts of unbrick my phone. Nothing really helps.
The most weird situation is that msmDownlodTool can finish the proccess with success. The driver installation is working... everything seens OK using the tool but my phone does not revive
Someone have a suggestion for me?
Any suggestion, tool or alternative method is welcome in my actual situation.
Sorry if I posted at wrong local, just tell me and I can fix if necessary.
Thanks in advance to all of you guys.
Click to expand...
Click to collapse
Hi there ! I am experiencing a similar issue on the same device. Did you manage to fix it ?
Hi dude are u here ? i will help u
Try this
Rhach1d237 said:
Hi there ! I am experiencing a similar issue on the same device. Did you manage to fix it ?
Click to expand...
Click to collapse
Source is a videotutorial. google oneplus 6 hardbrick and click the video of Max Lee
(it worked for me)
the download takes an awful lot of time
first get your phone into qualcomm download mode by holding down volume up + power button and plug your device in your PC.
(first unzip the hardbrick zip folder) then the oneplus 6 folder and than the .exe file and click 'start' if it detects your phone.
That is flashing every chip and Hydrogen OS 5.whatever.3 but that is not important. Your phone should boot and than you can install Oxygen OS with android 10(thats the other zip folder) using the local upgrade feature.
(make sure to enable google play services after upgrade from hydrogen OS)
Hope it will work for you too if you haven't tried it already.
Hello,
So, apparently i messed up. I installed nethunter on my phone, everything was working well, finished the configuration and then i had the idiotic idea to lock the bootloader since it was locked at the beginning when i received the phone, so i locked the bootloader not knowing the consequences of that.
Now i don't have how to go to enter in recovery mode, i can't boot. The program adb and fastboot doesn't detect the phone when i do adb devices or fastboot devices. I don't know how to proceed from here.
Any ideas ?
Kind regards,
C666PO said:
Hello,
So, apparently i messed up. I installed nethunter on my phone, everything was working well, finished the configuration and then i had the idiotic idea to lock the bootloader since it was locked at the beginning when i received the phone, so i locked the bootloader not knowing the consequences of that.
Now i don't have how to go to enter in recovery mode, i can't boot. The program adb and fastboot doesn't detect the phone when i do adb devices or fastboot devices. I don't know how to proceed from here.
Any ideas ?
Kind regards,
Click to expand...
Click to collapse
Yes,there are several unbrick tools on the forum i used this one and it worked for me!
I am not able to share links so im posting a few screew shots but if you google oneplus 7 pro unbrick you ahould find this thread easy
C666PO said:
Hello,
So, apparently i messed up. I installed nethunter on my phone, everything was working well, finished the configuration and then i had the idiotic idea to lock the bootloader since it was locked at the beginning when i received the phone, so i locked the bootloader not knowing the consequences of that.
Now i don't have how to go to enter in recovery mode, i can't boot. The program adb and fastboot doesn't detect the phone when i do adb devices or fastboot devices. I don't know how to proceed from here.
Any ideas ?
Kind regards,
Click to expand...
Click to collapse
I replied to you from the xda labs app and i couldnt attach a link but it works from the browser so i apologise for my first reply hope this one is more helpfull
https://forum.xda-developers.com/on...mega-unbrick-guide-hard-bricked-t3934659/amp/
Hello, i wanted to ask how to fix the fastboot mode.
Everytime when i try to access it, it just says "Entering Fastboot..."and thats all.
I dont want to close it, thats not my problem, i just wanna flash a recovery.img, and the fastboot seems not working. Any ideas?
M3DUS4 said:
Hello, i wanted to ask how to fix the fastboot mode.
Everytime when i try to access it, it just says "Entering Fastboot..."and thats all.
I dont want to close it, thats not my problem, i just wanna flash a recovery.img, and the fastboot seems not working. Any ideas?
Click to expand...
Click to collapse
this could be because the galaxy A51 wasnt built with fastboot, and the code to launch this option was just reused from a different device, or because something isnt connecting properly.
Hello, I have the same ... Android 11 (and currently 12) (from Frija). So it is not the fault of incorrect configuration or with connecting. Only something is wrong with this phone ...
I have this device and this solved it for me:
Enable OEM unlocking in developer settings
Shut down the phone
Hold volume up and volume down
Plug in a USB cable connected to a computer (the computer being turned on)
Keep holding
You're in download mode!
Side note: This might not work in USA or Canada, I am from europe and it works here. I have no idea if it works in another region. Also, you can't just flash a recovery.img on Samsung since there is no real "fastboot", you have to use download mode and Odin.
But I know how to enter download mode... Problem is Fastboot mode...
There is no fastboot mode on a modern Samsung device. If there is, it's fake and you cannot flash anything with it. As you can see even from Wikipedia, Odin is the Samsung replacement of fastboot.
So no fastboot, only download mode.
If a guide is saying to use fastboot, it is not compatible with Samsung.
If you would tell me why you specifically need fastboot, I'll be happy to tell you how you can do it with Odin, if possible.
Because I have Samsung Galaxy A51 5G (A516B) with new Android 12 and I can't do a root! Because I can't upload TWRP (custom recovery) because I haven't OEM unlock option in Deveoper Option. I tried trick with set back date by 7days but not succes. Everything I;ve metioned here - I did at my phone with Android 11.
And... I have read that I can turn this fu**ing OEM option by comend at ADB: fastboot oem unlock.
Phew ...
So this fastboot method is the last method to do a root with my phone.
Upload TWRP by Odin in download mode -ends red warning - of corse...
Have you any ideas?
I would be grateful for help...
I have read this fastboot method at:
How to Unlock Bootloader On Samsung Galaxy Phones [EASY GUIDE]
Are you looking for a Complete tutorial on How To Unlock Bootloader on Samsung Galaxy Phones? If yes, then you have come to the right place.
www.guidetoroot.com
Yeah, that guide is not relevant on any modern Samsung device. Besides, even if it was, which it isn't, you would first need to enable OEM unlocking from the Developer Settings.
But the fact that you don't have an option for OEM unlock is weird, since I have the exact same device model and it is there for me.
May I ask what is your region and is your phone locked to a telephone carrier?
My region is PLS - Poland. And not - phone is not locked. Have you the newest system Android 12?
Yes, I do. It's weird that there isn't even an option for you.
I'll try to come up with some new ideas if I have time...
I'll be glad for it...
Hej, do you have any idea?
stanwin said:
Hej, do you have any idea?
Click to expand...
Click to collapse
Have you tried everything listed here?
BloodyFruitDestroyer said:
Have you tried everything listed here?
Click to expand...
Click to collapse
Yes, I did. Evething exept the last one...
You could try it. It might be risky, but it's the only option I personally can come up with right now.
I've tried this option but Odin stuck on "files verification". Any help?
have any of you encountered this problem?
And how did you solve it?
You can also try searching for combination firmware for your device online