Database Info

A big problem after MIUI/Help

i am in trouble guys..i have been using miui since v4..whenever i wanted to revert to stock it was too hard to connect it to PC(windows 7) via usb. i tried 10-15 times.plugged unplugged plugged unplugged and at least i managed to connect and flash via odin...but yesterday i downloaded miui v10,1 and flashed.everything was fine.but the was too hot because of vurrut v4.. i flashed ganesh uc port for miui(kernel).and rebooted.but phone cant pass i9003 galaxy scl logo. and i cant access CWM..but i can enter download mode. the Problem is that i cant connect via usb to pc..everytime Your device is not recognised..even i download usb drivers for samsung. i even tried android sdk google revision usb pack 4 ..cant connect.what to do?

You mean the button combination can't boot into recovery?
Cheers
Sent from my GT-i9003 powered by MIUI

actually i dont need to boot into recovery) i can enter in download mode.but the problem is that after entering download mode i connect the usb. and on pc appears this: Usb device not recognised...

for this time i iam luckly..but the next time when i want to install MIUI cm7 again i will face this problem again...i would like to know how to solve it

Just boot to recovery and factory reset you should boot
Cheers
Sent from my GT-i9003 powered by MIUI

Install the latest Samsung USB Drivers. And you should plug in the usb cable directly to pc and not on the USB extension. Try this link. They are compatible with I9003
http://forum.xda-developers.com/showthread.php?t=961956

I cannot send sms rom：v10.1 miui

where is CWM in MIUI? how can i restore all my data?
While other roms have recovery option i do not find this in MIUI?
I seriously want to enjoy MIUI.....
please help

vivekanandrc said:
where is CWM in MIUI? how can i restore all my data?
While other roms have recovery option i do not find this in MIUI?
I seriously want to enjoy MIUI.....
please help
Click to expand...
Click to collapse
Look for the backup app in Tools. There you can restore your system.

same problem here
erbao1210 said:
I cannot send sms rom：v10.1 miui
Click to expand...
Click to collapse
Hi Sir,
Im having the same problem too, is there a solution to it? im on xxkpu using miui v10.2 thanks!

rxt5150 said:
Hi Sir,
Im having the same problem too, is there a solution to it? im on xxkpu using miui v10.2 thanks!
Click to expand...
Click to collapse
I have been sending 200 texts per day and i am on MIUI v 10.2 xxkpq.
Try that.

texts
rockyddroid said:
I have been sending 200 texts per day and i am on MIUI v 10.2 xxkpq.
Try that.
Click to expand...
Click to collapse
for now sir i"ve been using go sms pro and not the stock messaging app in miui and I must say sending msgs is a breeze.. Thanks anyway!

Problem solved. Problem was the Usb cable itself.after changing everything worked.
Sent from my GT-I9003 using XDA

Found the solution
Nightwish sgsl said:
i am in trouble guys..i have been using miui since v4..whenever i wanted to revert to stock it was too hard to connect it to PC(windows 7) via usb. i tried 10-15 times.plugged unplugged plugged unplugged and at least i managed to connect and flash via odin...but yesterday i downloaded miui v10,1 and flashed.everything was fine.but the was too hot because of vurrut v4.. i flashed ganesh uc port for miui(kernel).and rebooted.but phone cant pass i9003 galaxy scl logo. and i cant access CWM..but i can enter download mode. the Problem is that i cant connect via usb to pc..everytime Your device is not recognised..even i download usb drivers for samsung. i even tried android sdk google revision usb pack 4 ..cant connect.what to do?
Click to expand...
Click to collapse
Hi,
Just go to SwapSD and select 'Swap'. This will mount the sdcard. This has got nothing to do with the USB cable or the drivers. Enjoy!

Weird Problems In My Galaxy R

Sorry, i am back with problem again !!
1. Whenevr i am transferring the files from pc to computer/computer to pc, suddenly the phone disconnects, although the cable is connected it will be disconnected, and ask me again to tap on CONNECT USB STORAGE in phone.
2. I cannot take a backup of my phone in Kies (contacts, msgs etc)
3. Kies say, Your device does not not support updating from kies
4. yesterday i did a Wipe data from CWM, and from then Play Store is not opening, it just ask to add a/c and i did it, then says COnnection Timed Out (wifi)
Note;1. my phone is not rooted, i am using Neo ROM.
2. i have tried it in different PC, still the phone disconnects and ask me to connect it again
3. i had the same problem with 8 gb card, i thought it was card problem, but now i have 32gb, its still same

chandrus1983 said:
Sorry, i am back with problem again !!
1. Whenevr i am transferring the files from pc to computer/computer to pc, suddenly the phone disconnects, although the cable is connected it will be disconnected, and ask me again to tap on CONNECT USB STORAGE in phone.
2. I cannot take a backup of my phone in Kies (contacts, msgs etc)
3. Kies say, Your device does not not support updating from kies
4. yesterday i did a Wipe data from CWM, and from then Play Store is not opening, it just ask to add a/c and i did it, then says COnnection Timed Out (wifi)
Note;1. my phone is not rooted, i am using Neo ROM.
2. i have tried it in different PC, still the phone disconnects and ask me to connect it again
3. i had the same problem with 8 gb card, i thought it was card problem, but now i have 32gb, its still same
Click to expand...
Click to collapse
Yes.....even i have d same problem while transferring huge files on my 8gb card...it started to appear over nite..
what can you do
1. Try to take CWM backup...
2. try to change ur data cable
3. try to copy files on internal storage...and see if it disconnects ??
coz whenever i copy on my internal storage..it doesnt disconnects...

And for Kies update Problem, You have used Indian CSC with that of ZSLE5/ZSLE6. Kies detects phone for upgrade only with the Stock combination of PDA, PHONE and CSC and not with different combinations, If you go back to Stock Combination, Kies should detect phone for upgrade without any fuss(PS: Why do you need Kies to update at all? Use ROM from Sampro.pl or samsung-updates.com and flash using ODIN)

Even I have this usb disconnection problem sometimes, I thought my usb port was loose since if I don't touch my phone during transfer, it never disconnects.
"Humka ICS de dyo babua!"
Sent from my GALAXY R using XDA

vipul12389mehta said:
Yes.....even i have d same problem while transferring huge files on my 8gb card...it started to appear over nite..
what can you do
1. Try to take CWM backup...
2. try to change ur data cable
3. try to copy files on internal storage...and see if it disconnects ??
coz whenever i copy on my internal storage..it doesnt disconnects...
Click to expand...
Click to collapse
contacts and msgs will be backed up in CWM ???
emanoj.i9103 said:
And for Kies update Problem, You have used Indian CSC with that of ZSLE5/ZSLE6. Kies detects phone for upgrade only with the Stock combination of PDA, PHONE and CSC and not with different combinations, If you go back to Stock Combination, Kies should detect phone for upgrade without any fuss(PS: Why do you need Kies to update at all? Use ROM from Sampro.pl or samsung-updates.com and flash using ODIN)
Click to expand...
Click to collapse
Oh yeah right...and i just wanted to solve it so i asked.... and i want to check ICS update , so i need it
gitanshu said:
Even I have this usb disconnection problem sometimes, I thought my usb port was loose since if I don't touch my phone during transfer, it never disconnects.
"Humka ICS de dyo babua!"
Sent from my GALAXY R using XDA
Click to expand...
Click to collapse
i dont operate phone not PC while transferring files, but also this problem occurs

chandrus1983 said:
contacts and msgs will be backed up in CWM ???
Click to expand...
Click to collapse
Yes..it would be..
you can still copy contacts from your contacts app..!!

I had similar problem with big files transfer when I used SGR but only on my old PC that is running Vista. No problems on mac and new PCs that run Win7.
I guess maybe it was something wrong with USB port.

m.kochan10 said:
I had similar problem with big files transfer when I used SGR but only on my old PC that is running Vista. No problems on mac and new PCs that run Win7.
I guess maybe it was something wrong with USB port.
Click to expand...
Click to collapse
i tried with my bro's laptop, its a very well config laptop...still same....

How can u use neo rom without rooting.

Bhavik Jain said:
How can u use neo rom without rooting.
Click to expand...
Click to collapse
flash neo rom and flash stock kernel over it, u will have unrooted neo rom
---------- Post added at 08:43 PM ---------- Previous post was at 08:39 PM ----------
chandrus1983 said:
i tried with my bro's laptop, its a very well config laptop...still same....
Click to expand...
Click to collapse
in ur problem laptops config doesnt matters, old p3 and latest 3rd gen i5 will work in usb transfers
well i think there could be issue with ur usb cable or usb socket of phone. better install a stock rom and test. if still there is issue of usb disconnection i would suggest u to visit SSC.

Bhavik Jain said:
How can u use neo rom without rooting.
Click to expand...
Click to collapse
Nice question, but yes, i have stock kernel, coz i had brightness issues with the Neo kernel
xlm13x said:
flash neo rom and flash stock kernel over it, u will have unrooted neo rom
---------- Post added at 08:43 PM ---------- Previous post was at 08:39 PM ----------
in ur problem laptops config doesnt matters, old p3 and latest 3rd gen i5 will work in usb transfers
well i think there could be issue with ur usb cable or usb socket of phone. better install a stock rom and test. if still there is issue of usb disconnection i would suggest u to visit SSC.
Click to expand...
Click to collapse
Oh okay mate, will try it

Hey, i am not able to open Google Play , it does not show any apps, using wifi...neo rom...plzz help

chandrus is record holder of all Galaxy R problems
Sent from my GT-I9103 using xda premium

Count me in too....!!

Birki96 said:
chandrus is record holder of all Galaxy R problems
Sent from my GT-I9103 using xda premium
Click to expand...
Click to collapse
lol, yeah i keep trying something new, and end up in ditch :laugh:

[UPDATE] Problem Solved, i flashed to stock rom then flashed Neo Rom again, i dont know what the hell was wrong with the ROM or my SGR

Bricked A110 -- Help

Hi,
I tried to update stock JB and I had ICS v2 rooted Micromax A110.
Half way through it threw an error by saying Invalid FORMAT syntax or something of that sort after successfully copying files.
Now my phone
doesnt start
cannot go into recovery
There are no light blinking
Computer doesnt identify when connected
IT IS TRULY BRICKED..!!
Is there any alternative apart from taking it to service center?
Cheers
Fugitive

fugitive_4u said:
Hi,
I tried to update stock JB and I had ICS v2 rooted Micromax A110.
Half way through it threw an error by saying Invalid FORMAT syntax or something of that sort after successfully copying files.
Now my phone
doesnt start
cannot go into recovery
There are no light blinking
Computer doesnt identify when connected
IT IS TRULY BRICKED..!!
Is there any alternative apart from taking it to service center?
Cheers
Fugitive
Click to expand...
Click to collapse
May i know which procedure you tried for updation through SP flash tool or through cwm....

BOND1987 said:
May i know which procedure you tried for updation through SP flash tool or through cwm....
Click to expand...
Click to collapse
Thanks for replying..
Used SP Tool v3.1224.
Cheers
Fugitive

Try to flash V2 rom via SP tool again if it doesnt work you have to take it to the Service center and btw which os do you use for pc?

stealthroot said:
Try to flash V2 rom via SP tool again if it doesnt work you have to take it to the Service center and btw which os do you use for pc?
Click to expand...
Click to collapse
When switched off and connected to a power source, I dont even see the battery symbol. SP Tool doesnt recognise the phone from two machines I tried (one win 7 32-bit and another win7 64-bit).
Let me know if there are any other options I can try
Cheers
Fugitive

fugitive_4u said:
When switched off and connected to a power source, I dont even see the battery symbol. SP Tool doesnt recognise the phone from two machines I tried (one win 7 32-bit and another win7 64-bit).
Let me know if there are any other options I can try
Cheers
Fugitive
Click to expand...
Click to collapse
Uninstall the drivers of micromax /cyanus t2 if you have installed it check it via the device manager and install the drivers again try to flash it !

Thanks..!
Guys,
Many thanks for all the help and input.
I had to take it to Service Center in Bangalore. It was totally bricked and I explained them whatever I did honestly
They said my warranty would be void and they were still not aware if MMX had released a JB version and asked me to come 3 days later. Today I went in and lo behold my A110 was updated to JB and also warranty was not void. Nice people at support I say.
Now, me being me, within hours of getting my phone, I updated to CWM Recovery and rooted the phone
Cheers folks
Fugitive

[Q] Micromax A100 Not switching ON

I have a Micromax A100 mobile which is out of warranty. I tried to update the ICS with Jb 4.1.1 and at that time the mobile got OFF and now I am not able to SWITCH ON the mobile .
I tried with VolDown + Power key at the same time to launch FASTBOOT and so many options like that. The mobile is not ON.
Actually at the time of installation of GRAND ROM V3, downloaded from this site, it got struck, showing the message ""ERROR 7, Installtion Aborted"". I manually operated the options ( dont exactly remember) and tried to REBOOT and then it got OFF and not SWITCHED ON till now for the past 10 days.
When I connect it to PC with USB Cable, it is NOT SHOWN as a device in MY COMPUTER but is showing in Device Manager as "Qualcomm HS-USB QDLoader 9008" . What does this mean and what to do to solve this issue.
If you people say it is BRICKED, what is the solution for this ?
How can I get back my phone back in ON condition ?
Thanking you in anticipation for a solution.
Murthy

vsrkmurthy said:
I have a Micromax A100 mobile which is out of warranty. I tried to update the ICS with Jb 4.1.1 and at that time the mobile got OFF and now I am not able to SWITCH ON the mobile .
I tried with VolDown + Power key at the same time to launch FASTBOOT and so many options like that. The mobile is not ON.
Actually at the time of installation of GRAND ROM V3, downloaded from this site, it got struck, showing the message ""ERROR 7, Installtion Aborted"". I manually operated the options ( dont exactly remember) and tried to REBOOT and then it got OFF and not SWITCHED ON till now for the past 10 days.
When I connect it to PC with USB Cable, it is NOT SHOWN as a device in MY COMPUTER but is showing in Device Manager as "Qualcomm HS-USB QDLoader 9008" . What does this mean and what to do to solve this issue.
If you people say it is BRICKED, what is the solution for this ?
How can I get back my phone back in ON condition ?
Thanking you in anticipation for a solution.
Murthy
Click to expand...
Click to collapse
Actually Ur fone is a110 or a100 .If u r having a100 and flashed grand v3 rom which is for a110 u have hard bricked the fone .Can u enter into the recovery mode ?? Do u have a NANDROID back up ?

You flashed a110 rom on a100? Well then, yes it's partially bricked, since your bootloader is working as per device manager , so you can try to flash stock rom ofA100 on it using a flash tool meant for it.
Sent from my potato chamber using xda app-developers app

mufti.arfan said:
You flashed a110 rom on a100? Well then, yes it's partially bricked, since your bootloader is working as per device manager , so you can try to flash stock rom ofA100 on it using a flash tool meant for it.
Sent from my potato chamber using xda app-developers app
Click to expand...
Click to collapse
Well it may be Hard bricked not Partially bricked As you told the bootloader wont work as per device layout u cant boot the phone :good:

vish97 said:
Well it may be Hard bricked not Partially bricked As you told the bootloader wont work as per device layout u cant boot the phone :good:
Click to expand...
Click to collapse
But it's being detected by his pc. He can try doing some work around to flash stock. But chances are very least.
Sent from my potato chamber using xda app-developers app

Micromax A100 Switch ON Problem.
Friends,
Many of you told many options. My issue is unless it is detected by the PC (as a device under my computer), we will not be able to do anything as per me.
The other day I tried to do something using QPST V.2.7.402 and there also, the phone was detected as per the COM2 but capturing is not done and hence there also I was not able to do .
Understood from our forum only about UNBRICK. What does it mean and will there be any use of having it ? Also downloaded EAZY JTAG today morning using the links from our forum. Is it at all useful for me ?
To let all you guys know, the phone has no problem at all prior to this ROM installation. Now, am not able to SWITCH it ON.
As asked by Mr VISH97, I don't have any backup or I am not able to switch on the phone, so where is the point of entering recovery mode ?
As you guys say BRICKED is there any other solution for get back to working ??

vsrkmurthy said:
Friends,
Many of you told many options. My issue is unless it is detected by the PC (as a device under my computer), we will not be able to do anything as per me.
The other day I tried to do something using QPST V.2.7.402 and there also, the phone was detected as per the COM2 but capturing is not done and hence there also I was not able to do .
Understood from our forum only about UNBRICK. What does it mean and will there be any use of having it ? Also downloaded EAZY JTAG today morning using the links from our forum. Is it at all useful for me ?
To let all you guys know, the phone has no problem at all prior to this ROM installation. Now, am not able to SWITCH it ON.
As asked by Mr VISH97, I don't have any backup or I am not able to switch on the phone, so where is the point of entering recovery mode ?
As you guys say BRICKED is there any other solution for get back to working ??
Click to expand...
Click to collapse
If the board is bricked, nothing can be done, other than jtag method. Which necessarily doesn't work every time.
Sent from my potato chamber using xda app-developers app

my le1s eco is dead....computer is not detecting my phone

due of unstable rom my phone is dead.. i want to flash it with the stock rom using sp flash tool but in devicce manager my phone is not deteccted by my laptop...if once the drivers are detected everything is solved, please tell me how to make my computer detect my phone

Just install Telegram
And visit
https://t.me/LeecoUnofficial

thank you..but it is not working
asif2017 said:
Install mtk drivers on ur pc ..it will detect
Or whatsapp me +919906673436
Sent from my Letv X500 using Tapatalk
Click to expand...
Click to collapse
the device is not at all detected by the laptop

Try vcom driver mobistel

sam7799 said:
due of unstable rom my phone is dead.. i want to flash it with the stock rom using sp flash tool but in devicce manager my phone is not deteccted by my laptop...if once the drivers are detected everything is solved, please tell me how to make my computer detect my phone
Click to expand...
Click to collapse
Im also faced the same situation few months back,
Do these steps..
1.install adb drivers in pc,
2.in ur phone open twrp and select adb side load ..
3.run sp flashtools as administrator,press cntrl+atl+t and select device test..... now connect phn to pc..
4..if still ur pc didn't't recognise ur device...
5.then Chenge the com port (connect ur phone at back usb port of ur pc..)...
Best of luck dude..

Hey .plz help me my phone letv le 1s is stuck on starting logo due wrong rom flashing my. Phone is bricked stuck on starting logo .plz anybady know solution plz tell me
My contact 7028953438
[email protected]

Shrikantc615 said:
Hey .plz help me my phone letv le 1s is stuck on starting logo due wrong rom flashing my. Phone is bricked stuck on starting logo .plz anybady know solution plz tell me
My contact 7028953438
[email protected]
Click to expand...
Click to collapse
Do you have a backup of your rom you were using before?
If not then try to flash rom using SP flash tool ...for further information you can search on YouTube...?

[email protected]@ said:
Im also faced the same situation few months back,
Do these steps..
1.install adb drivers in pc,
2.in ur phone open twrp and select adb side load ..
3.run sp flashtools as administrator,press cntrl+atl+t and select device test..... now connect phn to pc..
4..if still ur pc didn't't recognise ur device...
5.then Chenge the com port (connect ur phone at back usb port of ur pc..)...
Best of luck dude..
Click to expand...
Click to collapse
Dude ! how am i supposed to go to twrp while phone is completely bricked.
It doesn't turn or just show red light and the pc is not detecting it.
Is there any solution i can get it recognized by the PC.

mmrtov said:
Dude ! how am i supposed to go to twrp while phone is completely bricked.
It doesn't turn or just show red light and the pc is not detecting it.
Is there any solution i can get it recognized by the PC.
Click to expand...
Click to collapse
Flash stock rom using sptool if it is bricked

santoshhh000 said:
Flash stock rom using sptool if it is bricked
Click to expand...
Click to collapse
I try flashing the x509 using the stock firmware but it's still not recognised by the computer.
What should I do to get my phone recognised by the computer my phone is letv 1s le x509.

mmrtov said:
I try flashing the x509 using the stock firmware but it's still not recognised by the computer.
What should I do to get my phone recognised by the computer my phone is letv 1s le x509.
Click to expand...
Click to collapse
Use mtkdrivers drivers

Please guide me about the driver like whis
Ch mtk driver i should install i m using windows 10 pro anniversary update 64 bit if possible please give me the download link.
Thank you

mmrtov said:
I try flashing the x509 using the stock firmware but it's still not recognised by the computer.
What should I do to get my phone recognised by the computer my phone is letv 1s le x509.
Click to expand...
Click to collapse
Have u tried installing vcom drivers ...? Before installing the rom.....
---------- Post added at 09:07 PM ---------- Previous post was at 08:56 PM ----------
mmrtov said:
Please guide me about the driver like whis
Ch mtk driver i should install i m using windows 10 pro anniversary update 64 bit if possible please give me the download link.
Thank you
Click to expand...
Click to collapse
https://tehnotone.com/windows-10-mtk-vcom-usb-drivers-for-32-64-bit-drivers-installation-tutorial/ here is the step by step process to install drivers. According to your pc version.

Try this method
youtu.be/-KSExDz_78E

Daniyal_sheikh said:
youtu.be/-KSExDz_78E
Click to expand...
Click to collapse
Can you explain ,....,,.,.,......,?

Le 1s suddenly off not detecting sp tool and charging show red light
4 month before when i use leeco le 1s mobile suddenly off and i press power button mobile not on.. Mobile is ****ch off i try to on mobile but doesn't on, when i connect phone charger notifications light is red and not show screen charging or any other change and i also try sp flash tool but not working mujhe lga hardware problem hoga so .. After some day when mobile give local show then his charge me 1800 and mobile is on and fine.. After few hours same problem mobile off red light while charging not detect laptop.. When again i give mobile local show he suggested for mother board change and price is 3000 and i not charging my mobile motherboard sir please help.. Hardware problem or software same ideas any one
---------- Post added at 11:58 AM ---------- Previous post was at 11:55 AM ----------
Please contact me bro and help me.. 7987597172