I have a Micromax A100 mobile which is out of warranty. I tried to update the ICS with Jb 4.1.1 and at that time the mobile got OFF and now I am not able to SWITCH ON the mobile .
I tried with VolDown + Power key at the same time to launch FASTBOOT and so many options like that. The mobile is not ON.
Actually at the time of installation of GRAND ROM V3, downloaded from this site, it got struck, showing the message ""ERROR 7, Installtion Aborted"". I manually operated the options ( dont exactly remember) and tried to REBOOT and then it got OFF and not SWITCHED ON till now for the past 10 days.
When I connect it to PC with USB Cable, it is NOT SHOWN as a device in MY COMPUTER but is showing in Device Manager as "Qualcomm HS-USB QDLoader 9008" . What does this mean and what to do to solve this issue.
If you people say it is BRICKED, what is the solution for this ?
How can I get back my phone back in ON condition ?
Thanking you in anticipation for a solution.
Murthy
vsrkmurthy said:
I have a Micromax A100 mobile which is out of warranty. I tried to update the ICS with Jb 4.1.1 and at that time the mobile got OFF and now I am not able to SWITCH ON the mobile .
I tried with VolDown + Power key at the same time to launch FASTBOOT and so many options like that. The mobile is not ON.
Actually at the time of installation of GRAND ROM V3, downloaded from this site, it got struck, showing the message ""ERROR 7, Installtion Aborted"". I manually operated the options ( dont exactly remember) and tried to REBOOT and then it got OFF and not SWITCHED ON till now for the past 10 days.
When I connect it to PC with USB Cable, it is NOT SHOWN as a device in MY COMPUTER but is showing in Device Manager as "Qualcomm HS-USB QDLoader 9008" . What does this mean and what to do to solve this issue.
If you people say it is BRICKED, what is the solution for this ?
How can I get back my phone back in ON condition ?
Thanking you in anticipation for a solution.
Murthy
Click to expand...
Click to collapse
Actually Ur fone is a110 or a100 .If u r having a100 and flashed grand v3 rom which is for a110 u have hard bricked the fone .Can u enter into the recovery mode ?? Do u have a NANDROID back up ?
You flashed a110 rom on a100? Well then, yes it's partially bricked, since your bootloader is working as per device manager , so you can try to flash stock rom ofA100 on it using a flash tool meant for it.
Sent from my potato chamber using xda app-developers app
mufti.arfan said:
You flashed a110 rom on a100? Well then, yes it's partially bricked, since your bootloader is working as per device manager , so you can try to flash stock rom ofA100 on it using a flash tool meant for it.
Sent from my potato chamber using xda app-developers app
Click to expand...
Click to collapse
Well it may be Hard bricked not Partially bricked As you told the bootloader wont work as per device layout u cant boot the phone :good:
vish97 said:
Well it may be Hard bricked not Partially bricked As you told the bootloader wont work as per device layout u cant boot the phone :good:
Click to expand...
Click to collapse
But it's being detected by his pc. He can try doing some work around to flash stock. But chances are very least.
Sent from my potato chamber using xda app-developers app
Micromax A100 Switch ON Problem.
Friends,
Many of you told many options. My issue is unless it is detected by the PC (as a device under my computer), we will not be able to do anything as per me.
The other day I tried to do something using QPST V.2.7.402 and there also, the phone was detected as per the COM2 but capturing is not done and hence there also I was not able to do .
Understood from our forum only about UNBRICK. What does it mean and will there be any use of having it ? Also downloaded EAZY JTAG today morning using the links from our forum. Is it at all useful for me ?
To let all you guys know, the phone has no problem at all prior to this ROM installation. Now, am not able to SWITCH it ON.
As asked by Mr VISH97, I don't have any backup or I am not able to switch on the phone, so where is the point of entering recovery mode ?
As you guys say BRICKED is there any other solution for get back to working ??
vsrkmurthy said:
Friends,
Many of you told many options. My issue is unless it is detected by the PC (as a device under my computer), we will not be able to do anything as per me.
The other day I tried to do something using QPST V.2.7.402 and there also, the phone was detected as per the COM2 but capturing is not done and hence there also I was not able to do .
Understood from our forum only about UNBRICK. What does it mean and will there be any use of having it ? Also downloaded EAZY JTAG today morning using the links from our forum. Is it at all useful for me ?
To let all you guys know, the phone has no problem at all prior to this ROM installation. Now, am not able to SWITCH it ON.
As asked by Mr VISH97, I don't have any backup or I am not able to switch on the phone, so where is the point of entering recovery mode ?
As you guys say BRICKED is there any other solution for get back to working ??
Click to expand...
Click to collapse
If the board is bricked, nothing can be done, other than jtag method. Which necessarily doesn't work every time.
Sent from my potato chamber using xda app-developers app
Related
Phone completely not working, and when i connect USB its getting connection as APX drive. download mode, recovery mode not working.
i dont know what i have to do for this .........
also i have tried to repair boot using RIFF bt phone not detecting.
Any help will be greatly appreciated
Did u try reinstalling the samsung usb drivers for our mobile ?
If it still doesn't solve your issue try connecting it to a different PC but install samsung usb drivers first on it before connecting.
Try & keep us updated if it resolves the issue.
Thanks for ur reply
phone is dead. its only need APX driver when attach USB.
I found the driver :
http://www.mediafire.com/?5lwxvgzlgvflfce
but what's next ?
RIFF doesn't detect it also .
@ usernome
Did you solve this problem. i have 2 phone in same position.
i just thinking its able to repair via Nvidia Boot Recovery mode.
but what is the procedure or what we have to do ?
0ps!! nothing found
I had the same problem with my phone the day I bought it.... it refused to start for over an hour for the 1st time no matter what I tried... the laptop detected a new apx when connected via usb.. Finally it started with sim and sd card removed... but after that it's been working rather fine apart from a few hiccups here n there... Still its very strange that this is happening..
Sent from my GT-I9103 using XDA App
delower10 said:
@ usernome
Did you solve this problem. i have 2 phone in same position.
i just thinking its able to repair via Nvidia Boot Recovery mode.
but what is the procedure or what we have to do ?
0ps!! nothing found
Click to expand...
Click to collapse
Hi buddy someone got the same issue without doing anything to the handset, when given to the CC they told it needs a motherboard replacement. I feel it maybe the same in your case & maybe you have no option but to take it to the Samsung service center.
Hope it helps.
'cooleagle' said:
Hi buddy someone got the same issue without doing anything to the handset, when given to the CC they told it needs a motherboard replacement. I feel it maybe the same in your case & maybe you have no option but to take it to the Samsung service center.
Hope it helps.
Click to expand...
Click to collapse
That's me bro
We need someone to make nvflash for the R !
Herpderp Defy.
NVFLASH was detecting the phone. The phone's capacitive buttons would light up when the connection was made. But I didn find SGR's Bootloader file anywhere, else would have tried to flash it. I read somewhere today that not clicking "Re-partition" option while using odin might corrupt the bootloader. But it had been weeks since I had used odin(CWM installation). So in no case the bootloader was damaged by odin. The thing to investigate is how come suddenly the phone goes into this mode, without any change in settings or modification ??
zerocool_rkl said:
NVFLASH was detecting the phone. The phone's capacitive buttons would light up when the connection was made. But I didn find SGR's Bootloader file anywhere, else would have tried to flash it. I read somewhere today that not clicking "Re-partition" option while using odin might corrupt the bootloader. But it had been weeks since I had used odin(CWM installation). So in no case the bootloader was damaged by odin. The thing to investigate is how come suddenly the phone goes into this mode, without any change in settings or modification ??
Click to expand...
Click to collapse
Might be a software/hardware defect
Herpderp Defy.
Any knows how to extract the bootloader ???
USE this method for repair i9103
http://forum.gsmhosting.com/vbb/f47...-need-jtag-no-need-disassembly-phone-1437798/
Sorry
I don't know what is APX mode
mine phone too is stuck in apx mode . i tired the fix galaxy R fone repair APX mode . after that too its stays in apx mode . please anyone help here
Hi Experts,
I was successfully able to flash ICS on my LG O3D but only .bin file and after that i tried to root phone was not sucessfully all the time ,restarted later and now my phone is not switching on properly.It shows LG logo then goes blank. PLEASE HELP.
Thanks in Advance.
When connected its showing charging and in device manager-->other devices showing CDC Serial & LGE COSMO USB Device
Did you try reflash it again ???
Try flash it with "lg smartflash" it tooo easy (just select the .bin file and .fls) .
Good Luck
Sent from my LG-P920
OS_Hacking said:
Did you try reflash it again ???
Try flash it with "lg smartflash" it tooo easy (just select the .bin file and .fls) .
Good Luck
Sent from my LG-P920
Click to expand...
Click to collapse
Thanks a lot for the reply.
I tried but nothing happening..its not detecting as usb to change port to 41.
Is there any other way?? Also for flashing when i insert battery and press volume up and then connect it starts and shows LG logo and goes blank.
It is not showing in PORT in device manager when connected pressing volume + button
Does the phone go to download mode ("S/W upgrade mode ) ?? By insert the battery while you hold vol+ ??
You will see two arrows like the sync symbol in your phone screen . And then the phone will still connected with the PC .
Your problem is easy to fix . Just try to enter download mode . And every thing will be fine .
Good Luck
Sent from my LG-P920
No its not going into download mode. COM is not detecting it.
[email protected] said:
No its not going into download mode. COM is not detecting it.
Click to expand...
Click to collapse
Try hold power on and the vol+ together , then plug it with the PC . Then insert the battery .
Sent from my LG-P920
[email protected] said:
Hi Experts,
I was successfully able to flash ICS on my LG O3D but only .bin file and after that i tried to root phone was not sucessfully all the time ,restarted later and now my phone is not switching on properly.It shows LG logo then goes blank. PLEASE HELP.
Thanks in Advance.
Click to expand...
Click to collapse
You hardbricked your phone if it doesn't go into download mode.
But no panic there is always a solution;
http://forum.xda-developers.com/showthread.php?t=1942836
Follow the guide above. (and I mean every step , however small they may seem)
ICS roms are now pre-rooted so you don't have to root.
Flash Xbsall's Ported custom ics (The one in the guide.)
Then install wkpark's recovery img. (Found here ; http://forum.xda-developers.com/showthread.php?t=1978543)
Boot into recovery.
Install Darkroom ICS Int. (It's the best in my opinion) or whatever rom you wish.
They are all pre-rooted.
If you can't i'll guide you through it.
Hope i Helped.
Cheers!
boltthrower56 said:
You hardbricked your phone if it doesn't go into download mode.
But no panic there is always a solution;
http://forum.xda-developers.com/showthread.php?t=1942836
Follow the guide above. (and I mean every step , however small they may seem)
ICS roms are now pre-rooted so you don't have to root.
Flash Xbsall's Ported custom ics (The one in the guide.)
Then install wkpark's recovery img. (Found here ; http://forum.xda-developers.com/showthread.php?t=1978543)
Boot into recovery.
Install Darkroom ICS Int. (It's the best in my opinion) or whatever rom you wish.
They are all pre-rooted.
If you can't i'll guide you through it.
Hope i Helped.
Cheers!
Click to expand...
Click to collapse
Thanks a lot for the help and i really appreciate your willingness to take me out of this trouble, Thanks again
Everything worked fine till step 9..But still not showing anything in Ports
Make sure the drivers are correctly installed. Especially omap4430...
Start the script that has been referred to in the guide.
Shut down the phone , remove the battery , plug usb cable and when you see "waiting for 5 seconds" plug in the battery. That should work.
Keep me posted.
Sent from my LG-P920 using xda app-developers app
Its showing s/w update image in phone but getting message USB device not detected in PC
Thanks alot boltthrower56 .
Finally able to recover my phone and restored 3 month old backup.
By the way may i know your real name .
Can you please help me with upgrading to ICS?
[email protected] said:
Its showing s/w update image in phone but getting message USB device not detected in PC
Click to expand...
Click to collapse
That may mean you have a bad cable.
But if you restored it , it's probably sometimes bad or you changed it or you used the front panel which is a hub (divides bandwidth , slows flashing process) and it's bad for ya.
Since my real name is turkish and hard to spell i'll give one better ;
Call me John.
If you must know my real name is "Dogukan".
And yes i can help you with that although it's relatively easy now that you got a hold of it.
Thanks a lot Dogukan..
Are you into android development? Am a real noob in this and you helped me coming out of really difficult situation.
Now i want to root my phone and everytime its showing 'error no device find'
I'm not into android development... my skills lie in networking so there is not much i can do for android.
But those are common knowledge...
I bricked my phone several times to learn those.
You don't need to root. Follow wkpark's recovery installation and flash a custom rom (Darkroom int is great)
Sent from my LG-P920 using xda app-developers app
Hi,
I tried to update stock JB and I had ICS v2 rooted Micromax A110.
Half way through it threw an error by saying Invalid FORMAT syntax or something of that sort after successfully copying files.
Now my phone
doesnt start
cannot go into recovery
There are no light blinking
Computer doesnt identify when connected
IT IS TRULY BRICKED..!!
Is there any alternative apart from taking it to service center?
Cheers
Fugitive
fugitive_4u said:
Hi,
I tried to update stock JB and I had ICS v2 rooted Micromax A110.
Half way through it threw an error by saying Invalid FORMAT syntax or something of that sort after successfully copying files.
Now my phone
doesnt start
cannot go into recovery
There are no light blinking
Computer doesnt identify when connected
IT IS TRULY BRICKED..!!
Is there any alternative apart from taking it to service center?
Cheers
Fugitive
Click to expand...
Click to collapse
May i know which procedure you tried for updation through SP flash tool or through cwm....
BOND1987 said:
May i know which procedure you tried for updation through SP flash tool or through cwm....
Click to expand...
Click to collapse
Thanks for replying..
Used SP Tool v3.1224.
Cheers
Fugitive
Try to flash V2 rom via SP tool again if it doesnt work you have to take it to the Service center and btw which os do you use for pc?
stealthroot said:
Try to flash V2 rom via SP tool again if it doesnt work you have to take it to the Service center and btw which os do you use for pc?
Click to expand...
Click to collapse
When switched off and connected to a power source, I dont even see the battery symbol. SP Tool doesnt recognise the phone from two machines I tried (one win 7 32-bit and another win7 64-bit).
Let me know if there are any other options I can try
Cheers
Fugitive
fugitive_4u said:
When switched off and connected to a power source, I dont even see the battery symbol. SP Tool doesnt recognise the phone from two machines I tried (one win 7 32-bit and another win7 64-bit).
Let me know if there are any other options I can try
Cheers
Fugitive
Click to expand...
Click to collapse
Uninstall the drivers of micromax /cyanus t2 if you have installed it check it via the device manager and install the drivers again try to flash it !
Thanks..!
Guys,
Many thanks for all the help and input.
I had to take it to Service Center in Bangalore. It was totally bricked and I explained them whatever I did honestly
They said my warranty would be void and they were still not aware if MMX had released a JB version and asked me to come 3 days later. Today I went in and lo behold my A110 was updated to JB and also warranty was not void. Nice people at support I say.
Now, me being me, within hours of getting my phone, I updated to CWM Recovery and rooted the phone
Cheers folks
Fugitive
Hi all
I've managed to create a CWM recovery for the Zen Ultrafone 701HD..... Thought I'd share this too...
For my tutorial on Rooting the same phone see here :-
http://forum.xda-developers.com/showthread.php?t=2283125
See the above link to activate USB debugging and install ADB drivers.....
CREDITS:-
I've Tested the CWMr on my own Phone....It Works..
This was made through the resources already available on various threads in XDA..
All credits to the original developers...
Special thanks to Koush Dutta for his online CWM revovery builder.... works like a charm..
I take DO NOT responsibility for any damages - It worked on my phone, no reason it should
not work on the other 701HDs out there.... Take a backup of all important stuff... Better safe than sorry..
STEP 1 - INSTALL PHONE DRIVERS
Connect your phone to your computer via USB.
Go to control panel -> device manager after a few minutes
Right click on Zen Ultrafone and update drivers ... required drivers are attached in above link.
Your device manager should not normally have any unrecognized hardware after this step. ( see attached Image).
The"Android Composite ADB Interface" MUST be listed by now... if not recheck your steps again.
Disconnect and restart your phone and your computer and make sure it stays that way.
STEP 2 -INSTALL THE USB VCOM DRIVER
This driver helps the computer recognize the phone's flash memory when it is SWITCHED OFF.
Disconnect your phone and switch it off... remove battery and put it back in just to make sure.
Keep device manager in windows open.
Connect the phone now.
The computer should list the Preloader in device manager with a yellow triangle.
Right click and install the drivers... accept any prompts to install unsigned drivers as they appear.
Disconnect the phone..
STEP 3 - FLASH THE CWM RECOVERY
Download and extract SP Flash tools to a folder.
Place the scatter file and the recovery image in a separate folder
Open SP Flash tools select the scatter loading file given
CAREFULLY UNCHECK ALL BOXES EXCEPT RECOVERY!! - this is essential!!
Click on recovery and choose the recovery image provided
Press 'Download' button on SP Flash tools.... DO NOT hit the firmware update button...
Now reconnect your phone.... accept any prompts...
When the Green ring appears, you are done...
Please hit thanks..... and please JOIN the forum and leave some feedback...
Edit: - I am somehow unable to uplaod the CWM recovery to xda.... meanwhile i've uploaded it here..
https://docs.google.com/file/d/0B9ZlmxCxbtQ8UjhfX3ZYRFZmS3c/edit?usp=sharing
Alternate (easier) method
This method needs a rooted phone-
Install mobile uncle tools from Play Store.
Place the recovery.img provided in root of SD card.
open mobile uncle tools and flash the recovery.
Thats It!!
completely lost faith in zen uf 701 hd..
got a product which has few blue lines on the screen and camera not working.
made a refund and looking to buy any other quadcore.
canvas hd, canvas 2 plus, umi x2
which is better?
Sorry to hear that man. I dont believe the canvas is any better in terms of quality control. Where did you buy the ultrafone from? Mine came in pretty good packing.
Looks like I've lost a valuable developer resource
Sent from my ultrafone 701HD using xda app-developers app
I'd suggest you go for the Panasonic p51. Just wait a few more months - its price is falling by the day
Sent from my ultrafone 701HD using xda app-developers app
Hello all. Received my 701 HD a couple of days back . thankfully no defects in my piece. And phone Is awesome !
And I was really surprised you guys have already rooted And Made CWM ready ! My salutes bro....
Looking forward to root and try better ROms when this new mobile vanity wears off soon
BTW Is there an unrooting method present ? Maybe it will be if help looking at many complaints this phone has
Sent from my ultrafone 701HD using xda app-developers app
Haven't tried to in root it yet. Guess flashing the stock ROM will do.
Sent from my ultrafone 701HD
Oh yes... I Forgot that flashing stock ROM does the trick
But then I guess we will also have to remove the custom recovery to avail warranty . just in case ??
Sent from my ultrafone 701HD using xda app-developers app
Yes. For warranty, you'll have to restore everything to stock state. The stock recovery can be flashed via stools too. Just replace the cmw with the stock recovery in my tutorial.
Sent from my ultrafone 701HD
BTW. I am sure we can find a lot of clone phones of our zen 701. Notably canvas HD, xolo Q1000. Celkon signature HD
Maybe in near future we could port the best roms from them. What say ?
Sent from my ultrafone 701HD using xda app-developers app
That is the plan for now
Sent from my ultrafone 701HD
vishwasnp said:
BTW. I am sure we can find a lot of clone phones of our zen 701. Notably canvas HD, xolo Q1000. Celkon signature HD
Maybe in near future we could port the best roms from them. What say ?
Sent from my ultrafone 701HD using xda app-developers app
Click to expand...
Click to collapse
uploading fazhdv3 rom for zen 701 hd 74%
a copy of sam hd v3 of a116
http://forum.xda-developers.com/showthread.php?t=2201122
Guys. Is it only me or are you also noticing that Wi fi reception is very weak in this cell ? :banghead:
Sent from my ultrafone 701HD using xda app-developers app
No issues with WiFi here. Tried connecting through public hotspots , mobile thetering, used this phone as hotspot, used WiFi direct with super beam - all work like a charm.
Looks like my WiFi router has gone numb due to cold these days
Any suggestions to improve signal strength of router ? The weak signal is really testing my patience :banghead:
Sent from my ultrafone 701HD using xda app-developers app
Could be due to interference. Try a selecting manual frequency in router
Dudes. Have any of you guys installed custom Roms yet ? The pathetic streaming of YouTube from WiFi in this phone is testing my patience
Sent from my ultrafone 701HD using xda app-developers app
Is your WiFi issue resolved? I be never tried YouTube so far..... Will try and then update
I moved my router to a closer position now. It is better. Will observe for a few more days see how it performs
Sent from my ultrafone 701HD using xda app-developers app
dextrorotatrix said:
Hi all
I've managed to create a CWM recovery for the Zen Ultrafone 701HD..... Thought I'd share this too...
For my tutorial on Rooting the same phone see here :-
http://forum.xda-developers.com/showthread.php?t=2283125
See the above link to activate USB debugging and install ADB drivers.....
CREDITS:-
I've Tested the CWMr on my own Phone....It Works..
This was made through the resources already available on various threads in XDA..
All credits to the original developers...
Special thanks to Koush Dutta for his online CWM revovery builder.... works like a charm..
I take DO NOT responsibility for any damages - It worked on my phone, no reason it should
not work on the other 701HDs out there.... Take a backup of all important stuff... Better safe than sorry..
STEP 1 - INSTALL PHONE DRIVERS
Connect your phone to your computer via USB.
Go to control panel -> device manager after a few minutes
Right click on Zen Ultrafone and update drivers ... required drivers are attached in above link.
Your device manager should not normally have any unrecognized hardware after this step. ( see attached Image).
The"Android Composite ADB Interface" MUST be listed by now... if not recheck your steps again.
Disconnect and restart your phone and your computer and make sure it stays that way.
STEP 2 -INSTALL THE USB VCOM DRIVER
This driver helps the computer recognize the phone's flash memory when it is SWITCHED OFF.
Disconnect your phone and switch it off... remove battery and put it back in just to make sure.
Keep device manager in windows open.
Connect the phone now.
The computer should list the Preloader in device manager with a yellow triangle.
Right click and install the drivers... accept any prompts to install unsigned drivers as they appear.
Disconnect the phone..
STEP 3 - FLASH THE CWM RECOVERY
Download and extract SP Flash tools to a folder.
Place the scatter file and the recovery image in a separate folder
Open SP Flash tools select the scatter loading file given
CAREFULLY UNCHECK ALL BOXES EXCEPT RECOVERY!! - this is essential!!
Click on recovery and choose the recovery image provided
Press 'Download' button on SP Flash tools.... DO NOT hit the firmware update button...
Now reconnect your phone.... accept any prompts...
When the Green ring appears, you are done...
Please hit thanks..... and please JOIN the forum and leave some feedback...
Click to expand...
Click to collapse
My phone is not loading the image also unable to load the recovery file too. Can you please help me out where can i download the recovery.img file as the link you have provided does not have the same.
So My Friend Cellphone's "LENOVO A369i" has been Bricked .. I tried to fix it connect it for the first time, uploaded the firmware and IT FIXES :good: :fingers-crossed: but after installing CWM it still okay. After I install a Flash ROM when I Start It again It cannot start but I can go to CWM recovery :crying: I NEED TO FIX it
- Help Is Always Accepted
Flash stock firmware back on.
I'm not home or I would search for links sorry.
In Google type your phone name + return to stock.
Sent from my LG-VS980 using XDA Premium 4 mobile app
1165
The Thing is i cant connect the device to the computer when I plug it in .. it ready in a second again .. it none until it's like that over and over again .. tried to reinstall the drivers but no use!!
PauloAgojo277 said:
The Thing is i cant connect the device to the computer when I plug it in .. it ready in a second again .. it none until it's like that over and over again .. tried to reinstall the drivers but no use!!
Click to expand...
Click to collapse
To put the stock rom back on lenovo device, it must be powered off. (if it has a removable battery it must be removed).
preinstal the drivers into pc/laptop.
open device manager
plug in lenovo.
if device manager says 'mediatek,,,,' you are a winner & can use the sp flash tool included in the zipped rom to instal the rom.
if device manager says 'unknown device' you have 2 seconds to click on it & select update driver and a point to the downloaded lenovo driver (then it will be as above).
When you get green circle you are complete and may disconnect and put battery back in.
PauloAgojo277 said:
So My Friend Cellphone's "LENOVO A369i" has been Bricked .. I tried to fix it connect it for the first time, uploaded the firmware and IT FIXES :good: :fingers-crossed: but after installing CWM it still okay. After I install a Flash ROM when I Start It again It cannot start but I can go to CWM recovery :crying: I NEED TO FIX it
- Help Is Always Accepted
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=50094020
Here's a step by step guide ..please be aware of the steps .. That help me from bricking my phone almost so many times
Sent from my Lenovo A369i using XDA Free mobile app
If you are using windows 8 then you can't install USB drives
---------- Post added at 02:20 AM ---------- Previous post was at 02:12 AM ----------
PauloAgojo277 said:
So My Friend Cellphone's "LENOVO A369i" has been Bricked .. I tried to fix it connect it for the first time, uploaded the firmware and IT FIXES :good: :fingers-crossed: but after installing CWM it still okay. After I install a Flash ROM when I Start It again It cannot start but I can go to CWM recovery :crying: I NEED TO FIX it
- Help Is Always Accepted
Click to expand...
Click to collapse
So if you are using windows 8 or higher version of windows then simply you have to degrade it to windows 7 or lower to install USB driver's