Phone completely not working, and when i connect USB its getting connection as APX drive. download mode, recovery mode not working.
i dont know what i have to do for this .........
also i have tried to repair boot using RIFF bt phone not detecting.
Any help will be greatly appreciated
Did u try reinstalling the samsung usb drivers for our mobile ?
If it still doesn't solve your issue try connecting it to a different PC but install samsung usb drivers first on it before connecting.
Try & keep us updated if it resolves the issue.
Thanks for ur reply
phone is dead. its only need APX driver when attach USB.
I found the driver :
http://www.mediafire.com/?5lwxvgzlgvflfce
but what's next ?
RIFF doesn't detect it also .
@ usernome
Did you solve this problem. i have 2 phone in same position.
i just thinking its able to repair via Nvidia Boot Recovery mode.
but what is the procedure or what we have to do ?
0ps!! nothing found
I had the same problem with my phone the day I bought it.... it refused to start for over an hour for the 1st time no matter what I tried... the laptop detected a new apx when connected via usb.. Finally it started with sim and sd card removed... but after that it's been working rather fine apart from a few hiccups here n there... Still its very strange that this is happening..
Sent from my GT-I9103 using XDA App
delower10 said:
@ usernome
Did you solve this problem. i have 2 phone in same position.
i just thinking its able to repair via Nvidia Boot Recovery mode.
but what is the procedure or what we have to do ?
0ps!! nothing found
Click to expand...
Click to collapse
Hi buddy someone got the same issue without doing anything to the handset, when given to the CC they told it needs a motherboard replacement. I feel it maybe the same in your case & maybe you have no option but to take it to the Samsung service center.
Hope it helps.
'cooleagle' said:
Hi buddy someone got the same issue without doing anything to the handset, when given to the CC they told it needs a motherboard replacement. I feel it maybe the same in your case & maybe you have no option but to take it to the Samsung service center.
Hope it helps.
Click to expand...
Click to collapse
That's me bro
We need someone to make nvflash for the R !
Herpderp Defy.
NVFLASH was detecting the phone. The phone's capacitive buttons would light up when the connection was made. But I didn find SGR's Bootloader file anywhere, else would have tried to flash it. I read somewhere today that not clicking "Re-partition" option while using odin might corrupt the bootloader. But it had been weeks since I had used odin(CWM installation). So in no case the bootloader was damaged by odin. The thing to investigate is how come suddenly the phone goes into this mode, without any change in settings or modification ??
zerocool_rkl said:
NVFLASH was detecting the phone. The phone's capacitive buttons would light up when the connection was made. But I didn find SGR's Bootloader file anywhere, else would have tried to flash it. I read somewhere today that not clicking "Re-partition" option while using odin might corrupt the bootloader. But it had been weeks since I had used odin(CWM installation). So in no case the bootloader was damaged by odin. The thing to investigate is how come suddenly the phone goes into this mode, without any change in settings or modification ??
Click to expand...
Click to collapse
Might be a software/hardware defect
Herpderp Defy.
Any knows how to extract the bootloader ???
USE this method for repair i9103
http://forum.gsmhosting.com/vbb/f47...-need-jtag-no-need-disassembly-phone-1437798/
Sorry
I don't know what is APX mode
mine phone too is stuck in apx mode . i tired the fix galaxy R fone repair APX mode . after that too its stays in apx mode . please anyone help here
Related
Hi Guys,
I have my friends i9003 with me. Its having a weird problems :
1) It successfully boots after 5-6 tries, but eventually hangs after a min on home screen.
2) Its unable to enter recovery mode.
3) It can enter download mode, but its not detectable by odin/PC. As soon as i connect to PC, it shows usb device not recognized. I have tried 2-3 different pc's, uninstalled/reinstalled kies/samsung drivers etc. On the same pc my SGS1 & SGS2 can connect without any problems. So i guess the problem is with i9003. (So i cant flash anything on it)
4) And the last but not the least.....it cannot be charger (tried pc usb / charger). But the battery seems ok, as i can charge it using other phones and dock charger.
..........any help and advice will be really appreciated.
have u tried the hard reset button at the back between the camera and speaker.
I've a I9003L with the same problem (it's carrier locked), I think it has no recovery at all !
Maybe flashing CWM
pratik_s said:
have u tried the hard reset button at the back between the camera and speaker.
Click to expand...
Click to collapse
Its use to get into download mode right !!! But i can easily get into download mode without doing it. The problem here is pc/odin does not detect it.
nipip said:
I've a I9003L with the same problem (it's carrier locked), I think it has no recovery at all !
Maybe flashing CWM
Click to expand...
Click to collapse
Not in my case, its unbranded, from middle east !
It might be a faulty cable. Did you try another cable?
if ur mobile is starting then try using mobile odin if not try flashing by heimdall software and which version of odin u r trying to use.use the latest
Hetalk said:
It might be a faulty cable. Did you try another cable?
Click to expand...
Click to collapse
4 cables, 6 different pc's, tried all usb drivers. (my Sgs2 works fine on all pc with all cables )
kazi_rizwan said:
4 cables, 6 different pc's, tried all usb drivers. (my Sgs2 works fine on all pc with all cables )
Click to expand...
Click to collapse
Just wanted to make sure you didn't have a problem as obvious as I had. I had similar issue when i tried my micromax cable with this phone.
Well, you'll need some expert's advice now.
Looks liek i found the problem, its same as many i9003's are having. Internal memory card corrupted !!! Have found some risky solutions, but will try them, cuz the phone is already out of guarantee !
i had also faced the same problem but i was unable to do it with that solution u can refer my thread http://forum.xda-developers.com/showthread.php?t=1735718 and i have given my mobile to the service centre for replacing motherboard
Few days later i tried to flash firmware 2.3.4 to my galaxy fit via odin but the process failed and after it my phone does't boot and not going into download mode...the phone has only a blank screen no key is working...when conected to charger a little beeping sound is produced but the screen remain black...then i take the phone to care centre in my area he tried a usb jig but nothing happend the phone still dead...please help me i am in a big problem i love my phone and don't want to lose it...:crying:
Try this
manpreet135 said:
Few days later i tried to flash firmware 2.3.4 to my galaxy fit via odin but the process failed and after it my phone does't boot and not going into download mode...the phone has only a blank screen no key is working...when conected to charger a little beeping sound is produced but the screen remain black...then i take the phone to care centre in my area he tried a usb jig but nothing happend the phone still dead...please help me i am in a big problem i love my phone and don't want to lose it...:crying:
Click to expand...
Click to collapse
Try this...
1. Install mobile drivers on pc and open Odin.exe
2. Connect phone to pc. Remove the battery.
3. Now, hold down VOLUME(-) and HOME key and POWER key together to get download mode.
4. While holding these 3 keys, (and your phone stll connected to pc) insert the battery.
Now Odin should detect your phone. If still it doesn't , then take it to the center.
If odin detects phone, flash the official firmware.
Hope it helps.
That Does't Work
Mr.Attitude02 said:
Try this...
1. Install mobile drivers on pc and open Odin.exe
2. Connect phone to pc. Remove the battery.
3. Now, hold down VOLUME(-) and HOME key and POWER key together to get download mode.
4. While holding these 3 keys, (and your phone stll connected to pc) insert the battery.
Now Odin should detect your phone. If still it doesn't , then take it to the center.
If odin detects phone, flash the official firmware.
Hope it helps.
Click to expand...
Click to collapse
I have tried all the tricks but no one is working even the Technician has tried the JIG but it also give no Help...if you know any other effective hardware or software to fix this problem than pls tell me......and I also heard about JTAG BOX...can this hardware fix my problem?,this should not be as a JIG coz JIG can't solve my problem and from where i can get this if the care centre or technician haven't...
Mr.Attitude02 said:
Try this...
1. Install mobile drivers on pc and open Odin.exe
2. Connect phone to pc. Remove the battery.
3. Now, hold down VOLUME(-) and HOME key and POWER key together to get download mode.
4. While holding these 3 keys, (and your phone stll connected to pc) insert the battery.
Now Odin should detect your phone. If still it doesn't , then take it to the center.
If odin detects phone, flash the official firmware.
Hope it helps.
Click to expand...
Click to collapse
Exactly what I posted. Thanks for telling...
Sent Via XDA™ Premium
option 2
here is the thread <http://forum.xda-developers.com/showthread.php?t=1349547>
by Ajay: Thanks to jtag box . I got delhi's dealer's address from official jtag site. I contacted him and he repaired boot with jtag.
he was able to solve his issue.
contact or PM him for ur concern
---------- Post added at 12:35 PM ---------- Previous post was at 12:30 PM ----------
Galaxy_Rohit said:
Exactly what I posted. Thanks for telling...
Sent Via XDA™ Premium
Click to expand...
Click to collapse
hmm
Mr.Attitude02_ROHIT took help from Galaxy_Rohit
just thot ur comment wud solve his prob.
manpreet135 said:
I have tried all the tricks but no one is working even the Technician has tried the JIG but it also give no Help...if you know any other effective hardware or software to fix this problem than pls tell me......and I also heard about JTAG BOX...can this hardware fix my problem?,this should not be as a JIG coz JIG can't solve my problem and from where i can get this if the care centre or technician haven't...
Click to expand...
Click to collapse
Here's the Jtag box dealers' list
http://www.jtagbox.com/category/jtag-dealers/
Here're the shops where you can unbrick your phone
http://www.jtagbox.com/riff-jtag-bo...s-unbrick-bricked-phone-riff-box-owners-list/
And here's the official page of RIFF JTAG Samsung Galaxy Fit GT-S5670 unbrick BOOT REPAIR SUPPORTED
www.jtagbox.com/jtag-news/riff-jtag-samsung-galaxy-fit-gts5670-unbrick-boot-repair-supported/
Sent Via XDA™ Premium
I have a TF101 SN60 - SBK1. I was trying today to root it to instal a stupid USB modem app and i bricked it.
Right now it is in recovery mode and i can`t get it out. Tried all the combination of the buttons and still doesn`t work.
I tried to reput the stock rom from Asus and i had success(2 times) but was still in recovery mode and after that i tried once more and it failled.. now i have 7 " !!!!! phone update failled !!!!" and i am very pissed and mad as i do not know what to do no more. I wasted 5 hours today trying to do something to it but i can`t no more. Please help me with some tips or maybe help me put it back to it`s normal state. Thank you.
Which recovery and version do you have installed, and how did you install it?
almost same issue
I have cwm 6 something and it wont recognize the sd or paths my laptop wont detect it have every method downloaded nothing what can i do about this?? Bricked for a long time !!
sriv2102 said:
I have cwm 6 something and it wont recognize the sd or paths my laptop wont detect it have every method downloaded nothing what can i do about this?? Bricked for a long time !!
Click to expand...
Click to collapse
Have you tried APX mode?
I would try another PC, or get a new charging cable. It is possible for the USB cable to charge but not work for USB. Happened to me.
Hello everybody,
I got my hands on this phone and I tampered too much with Qualcomm's FAT partition with the secondary bootloader, hardbricking the phone itself.
Trying to turn the phone on, shows the Samsung logo for some seconds then shuts down and disconnects, Download Mode is unaccessible but with VolUP+Home+Power the phone just stays connected (with the screen being black), but ignores any attempt to flash, Odin staying stuck on "SetupConnection...".
What I've tried already:
- Flashing with Heimdall -- phone isn't even recognized
- Removing the battery "trick" etc, etc, etc
- Changing .tar.md5 package
- Forcing a repartition with the .pit
Any clue might be useful, thanks in advance to anyone replying.
LucentW said:
Hello everybody,
I got my hands on this phone and I tampered too much with Qualcomm's FAT partition with the secondary bootloader, hardbricking the phone itself.
Trying to turn the phone on, shows the Samsung logo for some seconds then shuts down and disconnects, Download Mode is unaccessible but with VolUP+Home+Power the phone just stays connected (with the screen being black), but ignores any attempt to flash, Odin staying stuck on "SetupConnection...".
What I've tried already:
- Flashing with Heimdall -- phone isn't even recognized
- Removing the battery "trick" etc, etc, etc
- Changing .tar.md5 package
- Forcing a repartition with the .pit
Any clue might be useful, thanks in advance to anyone replying.
Click to expand...
Click to collapse
in my opinion go to coustmer service and you know it but i think
@ShadowsDie can help you
LucentW said:
Hello everybody,
I got my hands on this phone and I tampered too much with Qualcomm's FAT partition with the secondary bootloader, hardbricking the phone itself.
Trying to turn the phone on, shows the Samsung logo for some seconds then shuts down and disconnects, Download Mode is unaccessible but with VolUP+Home+Power the phone just stays connected (with the screen being black), but ignores any attempt to flash, Odin staying stuck on "SetupConnection...".
What I've tried already:
- Flashing with Heimdall -- phone isn't even recognized
- Removing the battery "trick" etc, etc, etc
- Changing .tar.md5 package
- Forcing a repartition with the .pit
Any clue might be useful, thanks in advance to anyone replying.
Click to expand...
Click to collapse
You shouldnt had to play with the bootloader neither the SBL
Im sorry to tell you that if your phone doesnt acces neither recovery and download mode it is hard bricked
that is why odin doesnt recognize the device
however, USB JIG is the best solution (the other one is changing the motherboard)
You can follow this instructions http://forum.xda-developers.com/galaxy-s2/help/guide-how-to-make-usb-jig-reset-binary-t1604707 to build one
using this SHOULD work but its even possible your bootloader is so messed up that will not open
You told me there about download mode, what about recovery mode? althought it should not work maybe God gives you a second chance
ShadowsDie said:
You shouldnt had to play with the bootloader neither the SBL
Im sorry to tell you that if your phone doesnt acces neither recovery and download mode it is hard bricked
that is why odin doesnt recognize the device
however, USB JIG is the best solution (the other one is changing the motherboard)
You can follow this instructions http://forum.xda-developers.com/galaxy-s2/help/guide-how-to-make-usb-jig-reset-binary-t1604707 to build one
using this SHOULD work but its even possible your bootloader is so messed up that will not open
You told me there about download mode, what about recovery mode? althought it should not work maybe God gives you a second chance
Click to expand...
Click to collapse
Actually ODIN recognizes the phone, but hangs on "SetupConnection...", sure the simplest solution might be the jig if there's a secondary bootloader in situ.
Obviously the recovery mode is dead, but still, I saw that it bypasses Samsung's logo and just reboots.
Since it's Qualcomm, probably the microSD emergency procedure used on the S3s might be a fair try.
If someone has still a working phone, can please do a dd image of the first 100 MB of the EMMC so I can see if this option is viable?
Might be a nice solution for hard bricked Qualcomm-based Samsung phones to unbrick those.
LucentW said:
Actually ODIN recognizes the phone, but hangs on "SetupConnection...", sure the simplest solution might be the jig if there's a secondary bootloader in situ.
Obviously the recovery mode is dead, but still, I saw that it bypasses Samsung's logo and just reboots.
Since it's Qualcomm, probably the microSD emergency procedure used on the S3s might be a fair try.
If someone has still a working phone, can please do a dd image of the first 100 MB of the EMMC so I can see if this option is viable?
Might be a nice solution for hard bricked Qualcomm-based Samsung phones to unbrick those.
Click to expand...
Click to collapse
First, for the SetupConnection try changing the ports but first BE SURE Kies is closed or end the task as Kies closes your connections using third-party programs
then reinstall samsung usb drivers or even adb drivers are good.
if you will find anyway to execute the command adb reboot-bootloader you could probably save the phone
2. I just read about the microSD procedure, it looks like a pretty clever idea
I wonder how do you know how many MB's you need
so i have done here a 70MB IMG, and with 100 didnt worked so I did a 99 MB one
Remember you need Class10 16 GB Card
If somehow this solved your problem, i will do a post in our General Section
Good Luck, i'll stay tuned.
EDIT: I just noticed the files have 169 MB so I can't post them here, tell me your email and i send you, my email is [email protected]
ShadowsDie said:
First, for the SetupConnection try changing the ports but first BE SURE Kies is closed or end the task as Kies closes your connections using third-party programs
then reinstall samsung usb drivers or even adb drivers are good.
if you will find anyway to execute the command adb reboot-bootloader you could probably save the phone
2. I just read about the microSD procedure, it looks like a pretty clever idea
I wonder how do you know how many MB's you need
so i have done here a 70MB IMG, and with 100 didnt worked so I did a 99 MB one
Remember you need Class10 16 GB Card
If somehow this solved your problem, i will do a post in our General Section
Good Luck, i'll stay tuned.
EDIT: I just noticed the files have 169 MB so I can't post them here, tell me your email and i send you, my email is [email protected]
Click to expand...
Click to collapse
I don't have Kies installed, since I never kept any Samsung phone with the stock TouchWiz ROM, but only the USB Drivers package for ODIN and so on.
I sent you a PM with my e-mail address, but you could upload the img to MEGA or whatever file locker service...
In the case this get sorted, I'll upload the IMG over my server and drop the link, so you don't need to worry about the link expiring or whatever
LucentW said:
I don't have Kies installed, since I never kept any Samsung phone with the stock TouchWiz ROM, but only the USB Drivers package for ODIN and so on.
I sent you a PM with my e-mail address, but you could upload the img to MEGA or whatever file locker service...
In the case this get sorted, I'll upload the IMG over my server and drop the link, so you don't need to worry about the link expiring or whatever
Click to expand...
Click to collapse
check your email
ShadowsDie said:
check your email
Click to expand...
Click to collapse
Tried to burn the SD card, it seems that the 7227A doesn't support boot-from-SD.
Anyways, I ordered off eBay for some change a jig dongle, as soon as I get that I'll try that way, but I think that it won't work since most of the hardware components (except for the NAND) are not made by Samsung.
I'll let you know how it proceeds
I was upgrading my Xperia TO 5.1 and was flashing recovery. TWRP was flashed but I was not able to flash any zip through it.
I tried unlocking bootloader but nothing happened. I tried this 3-4 times and suddenly my Phone gone blank.
Now the condition is neither LED or any kind of vibration is working. Phone is detected as Qualcomm Qloader 9008. I tried figuring out and found that bootloader is corrupt. Many person having Snapdragon Chipset have same problem. I found EMMC DL Tool which can repair this but in version 5.2.0.r I am getting invalid user error.
Then I tried Tool studio EMMC tool from ZTE but I am getting error while downloading the Hex file. Phone is detected but unfortunately I am not able to fix it.
Please go through screenshot.
Someone please help me to fix. Either using this emmc tool or anyother.
P.S. Went to SC they said to replace MB which will cost around 6500-7500. But I don't think to spend such money for repairing when I can but much better phone in that price segment.
I am not able to post image. Help me. I don't have 10 post count yet.
nik_123 said:
I was upgrading my Xperia TO 5.1 and was flashing recovery. TWRP was flashed but I was not able to flash any zip through it.
I tried unlocking bootloader but nothing happened. I tried this 3-4 times and suddenly my Phone gone blank.
Now the condition is neither LED or any kind of vibration is working. Phone is detected as Qualcomm Qloader 9008. I tried figuring out and found that bootloader is corrupt. Many person having Snapdragon Chipset have same problem. I found EMMC DL Tool which can repair this but in version 5.2.0.r I am getting invalid user error.
Then I tried Tool studio EMMC tool from ZTE but I am getting error while downloading the Hex file. Phone is detected but unfortunately I am not able to fix it.
Please go through screenshot.
Someone please help me to fix. Either using this emmc tool or anyother.
P.S. Went to SC they said to replace MB which will cost around 6500-7500. But I don't think to spend such money for repairing when I can but much better phone in that price segment.
Click to expand...
Click to collapse
So, you cannot get into flashmode or fastboot? Power off your phone, hold volume up and plug it into your pc without hitting the power button. Do you get any blue led or quick led flash at all? I'm not sure about your device's condition but I can surely try getting you files from my phone.
Try installing flashtool and see if flashtool recognizes your phone at all.
Agent_fabulous said:
So, you cannot get into flashmode or fastboot? Power off your phone, hold volume up and plug it into your pc without hitting the power button. Do you get any blue led or quick led flash at all? I'm not sure about your device's condition but I can surely try getting you files from my phone.
Try installing flashtool and see if flashtool recognizes your phone at all.
Click to expand...
Click to collapse
Only red LED glows while I plug it in PC. Flashtool can not recognize. EMMC tool recognize but can't find/download the files.
I am pretty sure once I get the tool running it will bring back my phone alive.
nik_123 said:
Only red LED glows while I plug it in PC. Flashtool can not recognize. EMMC tool recognize but can't find/download the files.
I am pretty sure once I get the tool running it will bring back my phone alive.
Click to expand...
Click to collapse
Hmm, can QPST find your phone? I'm trying to get a QPST/QCN backup which could be helpful. However, fastboot, flashmode, recovery or device running, I get ports empty. Can anyone help me out here? I can try draining my battery so I have the little phase of the dull red led where the device won't power on until it's a little charged.
Agent_fabulous said:
Hmm, can QPST find your phone? I'm trying to get a QPST/QCN backup which could be helpful. However, fastboot, flashmode, recovery or device running, I get ports empty. Can anyone help me out here? I can try draining my battery so I have the little phase of the dull red led where the device won't power on until it's a little charged.
Click to expand...
Click to collapse
I guess yes, but I don't remember exactly. Switch off your phone and connect may be it should detect.
nik_123 said:
I guess yes, but I don't remember exactly. Switch off your phone and connect may be it should detect.
Click to expand...
Click to collapse
Tried that but it ends up turning on and goes to the charging animation. (Which is after the Sony Logo.) Waiting for my phone to drain
nik_123 said:
I was upgrading my Xperia TO 5.1 and was flashing recovery. TWRP was flashed but I was not able to flash any zip through it.
I tried unlocking bootloader but nothing happened. I tried this 3-4 times and suddenly my Phone gone blank.
Now the condition is neither LED or any kind of vibration is working. Phone is detected as Qualcomm Qloader 9008. I tried figuring out and found that bootloader is corrupt. Many person having Snapdragon Chipset have same problem. I found EMMC DL Tool which can repair this but in version 5.2.0.r I am getting invalid user error.
Then I tried Tool studio EMMC tool from ZTE but I am getting error while downloading the Hex file. Phone is detected but unfortunately I am not able to fix it.
Please go through screenshot.
Someone please help me to fix. Either using this emmc tool or anyother.
P.S. Went to SC they said to replace MB which will cost around 6500-7500. But I don't think to spend such money for repairing when I can but much better phone in that price segment.
Click to expand...
Click to collapse
Jesus Christ, you installed a ROM without unlocking the bootloader first?... yare yare daze...
stuckbootloader said:
Jesus Christ, you installed a ROM without unlocking the bootloader first?... yare yare daze...
Click to expand...
Click to collapse
I unlocked it but the ROM zip was not flashing through TWRP. After 2-3 tries my phone went full dead. If you can help it will be great.
nik_123 said:
I unlocked it but the ROM zip was not flashing through TWRP. After 2-3 tries my phone went full dead. If you can help it will be great.
Click to expand...
Click to collapse
I'm afraid I can't...
Agent_fabulous said:
Tried that but it ends up turning on and goes to the charging animation. (Which is after the Sony Logo.) Waiting for my phone to drain
Click to expand...
Click to collapse
eh... if your device is showing loading anymation this means charger is loaded.... so no you dont have a hardbrick... try to reach fastbootmode over and over again
Sent from my Xperia T using XDA Free mobile app
SdtBarbarossa said:
eh... if your device is showing loading anymation this means charger is loaded.... so no you dont have a hardbrick... try to reach fastbootmode over and over again
Sent from my Xperia T using XDA Free mobile app
Click to expand...
Click to collapse
My phone is working fine. However, I've no idea how to get a QPST/QCN Backup (which I guess could) help out @nik_123
Agent_fabulous said:
My phone is working fine. However, I've no idea how to get a QPST/QCN Backup (which I guess could) help out @nik_123
Click to expand...
Click to collapse
nope... even if we have a snapdragon... since this is a semcflash device a backup is useless...
Sent from my Xperia T using XDA Free mobile app
Hello sir,
I had the same problem a month ago and I fixed my bricked Xperia L.
Just go to this thread and follow the steps ^^
http://forum.xda-developers.com/showthread.php?t=2695344
The thread says u need to download WMSHUA, but its in chinese language. If you don't know what it means just reply to this and i will translate it.
Good luck!
If it didn't worked, or u need help reply.