Database Info

[Q] SGS unable to USB connect

Hi
I have run into a small problem with my SGS 9000. I wanted to flash Insanity ROM 8.5 and ran into some problems so I restored my phone using Odin. I then booted into recovery and flashed a new modem and Kanity kernel 2.0. I then accidentally hit reboot before flashing the new ROM and now the phone won't boot (halts at the first SGS logo).
I can access download mode but not recovery. When I connect the phone to USB, Windows gives me a message that USB unit not recognized. This means I can't restore it using Odin.
I've tried taking out the battery for 5 minutes and changing computer/cable. I also uninstalled/re-installed the Samsung drivers and re-booted the computer a couple of times. Could it have something to do with USB debugging mode?

mate, open odin and the insanity rom....
then go to download mode on ur sgs and plug in ur usb, if alls well? reflash the Insanity ROM 8.5 again

That would work if Odin could discover the phone. I can get into download mode but the computer does not recognize the phone and thus I can not flash anything through Odin.

Could it have something to do with USB debugging mode?
no...
ur in a stivky situation, have u sorted it yet? ask a custom rom dev about it

lilmo22 said:
Could it have something to do with USB debugging mode?
no...
ur in a stivky situation, have u sorted it yet? ask a custom rom dev about it
Click to expand...
Click to collapse
Thanks, I'll do that I haven't had any progress, just endless hours reading various forums without any luck.

No recovery mode help!

I installed Mitra ROM [Motherf**** **** rom ] this stupid rom has messed up my phone completely , when someone calls me its shuts off , there are different colored lines on the screen , EXTREMELY laggy!!!!
I cant go into recovery again and my pc wont recognize the phone , ive installed drivers , kies and everything , tried every method !!1
WHAT can i do to get rid of this ****ty ****ty ROM??
Please help
Phone Samsung Galaxy S I9000

shasul said:
I installed Mitra ROM [Motherf**** **** rom ] this stupid rom has messed up my phone completely , when someone calls me its shuts off , there are different colored lines on the screen , EXTREMELY laggy!!!!
I cant go into recovery again and my pc wont recognize the phone , ive installed drivers , kies and everything , tried every method !!1
WHAT can i do to get rid of this ****ty ****ty ROM??
Please help
Click to expand...
Click to collapse
heeeelp urgent

What phone are you using?
Sent from my Desire HD using XDA App

I am using Samsung Galaxy S i9000

http://www.hard-reset.com/samsung-i9000-galaxy-s-hard-reset.html
Have you tried this?
Sent from my Desire HD using XDA App

Yes that's the problem i cant access it with pressing those buttons , neither can i access it from Rom manager. Is there any app/program available which i can download from the phone?
I want my reset to its original settings without this ****ty rom. I made a backup of the original rom but that backup has been deleted.
F*** i hate this ROM

http://forum.xda-developers.com/showthread.php?t=1256385
That should help you out!
Sent from my Desire HD using XDA App

ABorgh said:
http://forum.xda-developers.com/showthread.php?t=1256385
That should help you out!
Sent from my Desire HD using XDA App
Click to expand...
Click to collapse
Thanks i am currently looking at that but i cant connect to usb either because my phone is messed up and my laptop wont recognize it.

I can boot into the OS , like i can use the phone normally but its kind of messed up , shuts off randomly , gets stuck , makes horrible beeping noise etc etc.
So i just want this all cleared up and install a new fresh ROM
Please help

Well try to reinstall kies and all! Try to remove the sd card and inserting it to your computer trough a sd reader and put a stock rom on it, go in to fastboot (if your phone have it) then flash trough fastboot. Your phone can be saved, don't worry.
Sent from my Desire HD using XDA App

ABorgh said:
Well try to reinstall kies and all! Try to remove the sd card and inserting it to your computer trough a sd reader and put a stock rom on it, go in to fastboot (if your phone have it) then flash trough fastboot. Your phone can be saved, don't worry.
Sent from my Desire HD using XDA App
Click to expand...
Click to collapse
There is something really wrong with the usb settings , ive installed/uninstalled Kies several times , installed/reinstalled USB drivers several times but no luck.
I have rom manager and when i choose another rom to install it reboots the phone to get into clockwork recovery mode but instead of going to recovery my phone gets stuck on the Galaxy S start up screen
So
- No computer access (cant use odin)
- No recovery

shasul said:
There is something really wrong with the usb settings , ive installed/uninstalled Kies several times , installed/reinstalled USB drivers several times but no luck.
I have rom manager and when i choose another rom to install it reboots the phone to get into clockwork recovery mode but instead of going to recovery my phone gets stuck on the Galaxy S start up screen
So
- No computer access (cant use odin)
- No recovery
Click to expand...
Click to collapse
Try to download 4ext updater and flash new recovery, do superwipe and install a STOCK gingerbread rom
Sent from my Desire HD using XDA App

My device is not supported with Ext4 :/

Okey! This may sound ridiculous but try diffrent cable and pc!
Sent from my Desire HD using XDA App

ABorgh said:
Okey! This may sound ridiculous but try diffrent cable and pc!
Sent from my Desire HD using XDA App
Click to expand...
Click to collapse
Tried on 6 different pc's and tried 4 different micro usb cables
my pc does give me a message when i connect it but it says there is something wrong with the device therefore it cant connect

Hmm... Can you connect via ADB?
Sent from my Desire HD using XDA App

ABorgh said:
Hmm... Can you connect via ADB?
Sent from my Desire HD using XDA App
Click to expand...
Click to collapse
Nope , i installed ADB , drivers etc everything , it gives me error because it cant recognize the phone

shasul said:
Nope , i installed ADB , drivers etc everything , it gives me error because it cant recognize the phone
Click to expand...
Click to collapse
But have gone into cmd and written ADB Shell whilst cd in android sdk folder?
Read and watch this!
http://www.youtube.com/watch?v=-DYzCn4mzJE&feature=related
http://forum.xda-developers.com/showthread.php?t=977725
Sent from my Desire HD using XDA App

[Q] stuck on odin set up conection I am brick

hi there
After flashing a stock room I got a boot bucle, so i did reset data factory, cache partition and dalvich cache, restart and still had a boot bucle, so I enter in dowload mode again started odin and reflashed stok room 2.3.4 again; in the midle of the process i got an odin FAIL on red square !!!! after that fit doesnt even start, is dead.
I am still able to enter "dowload mode" by holding all three bottons (volume up/down. home and power) but when i tray to flash someting odin get stuck on <1> setup conection .....
any idea what i can do??

Try rebooting the PC and changing the USB port!...Hope it works!
galaxy fit + CM7.2 (2.3.7) + 801Mhz

neil.richard said:
Try rebooting the PC and changing the USB port!...Hope it works!
galaxy fit + CM7.2 (2.3.7) + 801Mhz
Click to expand...
Click to collapse
I have been restared many times and tryed every single usb port and doest work, but thanks for anwser
any body else, any idea ??

Try it from another pc, if possible. Might be internal hub problem of pc. At least you could exclude this after it.
Sent from my GT-S5570 using XDA App

Rodsengard said:
Try it from another pc, if possible. Might be internal hub problem of pc. At least you could exclude this after it.
Sent from my GT-S5570 using XDA App
Click to expand...
Click to collapse
i al ready try on 3 diferent pc`s and every port on them and still the same. any advice is welcome

Okay, you may try flashing creed's 1.3 using odin and then flash v1.5 over it...
Creed' s rom is any day better than the stock rom...
And if you want the stock rom only, you could redownload all your files...maybe that will help...

mefrodo said:
I have been restared many times and tryed every single usb port and doest work, but thanks for anwser
any body else, any idea ??
Click to expand...
Click to collapse
Can u go in Recovery mode?...if yes then u can either flash Creed's ROM or CM7!...
galaxy fit + CM7.2 (2.3.7) + 801Mhz

neil.richard said:
Can u go in Recovery mode?...if yes then u can either flash Creed's ROM or CM7!...
galaxy fit + CM7.2 (2.3.7) + 801Mhz
Click to expand...
Click to collapse
Odin does recognize the phone but, when i try ti flash any room it gets stuck on "set up conection..." after 45 minutes still same status.
help please!!!!

mefrodo said:
Odin does recognize the phone but, when i try ti flash any room it gets stuck on "set up conection..." after 45 minutes still same status.
help please!!!!
Click to expand...
Click to collapse
Okay, now some basic stuff...
Do you have a galaxy fit s5670??
And are you trying to flash galaxy fit's software only na???
And have tried taking out the battery, putting it back and restarting your phone??
also, while your phone is switched off, and you try to charge it, does the big battery icon come up???

a.cid said:
Okay, now some basic stuff...
Do you have a galaxy fit s5670??
And are you trying to flash galaxy fit's software only na???
And have tried taking out the battery, putting it back and restarting your phone??
also, while your phone is switched off, and you try to charge it, does the big battery icon come up???
Click to expand...
Click to collapse
thanks for for you answer
I have S5670
I am tryng to flash a stock room for s5670
I got nothing on screen, not even pulged
only way that odin recognize the phone is by holding volume up/down home and power, when press start button on odin it get stuck on firs step: "set up conection ... " and nothings happen after that
any idea is welcome ill try everyting

mefrodo said:
thanks for for you answer
I have S5670
I am tryng to flash a stock room for s5670
I got nothing on screen, not even pulged
only way that odin recognize the phone is by holding volume up/down home and power, when press start button on odin it get stuck on firs step: "set up conection ... " and nothings happen after that
any idea is welcome ill try everyting
Click to expand...
Click to collapse
The fact that odin recognizes your phone means that it isn't a hard brick..
If all else fails, try asking samsung for a replacement..
Say you left the phone to charge overnight and now it rrefuses to switch on...however, this should be your last resort...
Before that, can you list in detail, all the steps you did...like which odin, which ops etc...
And was your device able to connect to ur pc before you tried this, as in all drivers were present??
Also, maybe you can try flashing cwm from this:
http://forum.xda-developers.com/showthread.php?t=1352518

a.cid said:
The fact that odin recognizes your phone means that it isn't a hard brick..
If all else fails, try asking samsung for a replacement..
Say you left the phone to charge overnight and now it rrefuses to switch on...however, this should be your last resort...
Before that, can you list in detail, all the steps you did...like which odin, which ops etc...
And was your device able to connect to ur pc before you tried this, as in all drivers were present??
Also, maybe you can try flashing cwm from this:
http://forum.xda-developers.com/showthread.php?t=1352518
Click to expand...
Click to collapse
thanks for your answer, I will be writing all details at night due to I am working rigth now, also I`ll check the link a soon as I can. thanks in advance.

If the conection problem is... Before u usw odin plz make sure that u have instal lates kies on your pc/laptop...have u made it...and than if u usw windows xp plz make sure went u instal kies there are dotnet fix v 3.5 or 4 on your pc....usually kies will download it for u.....when u install it
I've try to flash frm my pc that use windows xp sp2 and doesnt have internet conection and i use kies from the cd boxlet it doesnt work... I think ww have the same problem... May it help u......
Sent from my GT-S5670 using xda premium

And a big sorry for my terible english....... (●*∩_∩*●)
i think your problem is :
1: you do t have the latest dotnet fix......
2. your kies is not ip to date or u even doesn't install it....
3. or your antivirus block the acces.so plz stop all of your antivirus begore flasing use odin...
4. u have usb problem..plz search on it..im not master about it... im just a new kid on the block lol (︶︿︶)
the thing that should u do....
1. check your version of wi diws and dotnet fix.
2. stop all of your antivirus....
3. try reinstal kies first and update it....than run your odin....
Sent from my GT-S5670 using xda premium

I have the same problem... I've tried everything... I don't know what else to do (

reizen said:
I have the same problem... I've tried everything... I don't know what else to do (
Click to expand...
Click to collapse
Im not master bout it.but before trying can u write here soec of your pc....
Sent from my GT-S5670 using xda premium

sorry .... can be more explicit ... I do not know very well English

Haha lol sorry there somany eror on what i've type
Sent from my GT-S5670 using xda premium

reizen said:
sorry .... can be more explicit ... I do not know very well English
Click to expand...
Click to collapse
Can you share your pc spec here.... Cause i think the problem is not on the odin but your pc software..
Sent from my GT-S5670 using xda premium

problem solved... thanks for help!
... was due to the USB port, I did not have USB 2.0 port

[Q] [URGENT] USB Issues

So, i had my phone with the MIUI rom but i wasn't really liking because it was a little slow, so i flashed Kyrillos 9.5
After i flashed Kyrillos 9.5 i start having some battery issues, i was thinking that it was some problem of the ROM so i went away to flash another ROM, but ODIN didn't detected my phone, i upgraded the drivers and nothing.
My last try was to flash a rom by the update.zip method.
It didn't ended well and now i can't use the phone at all, it just stucks at bootloading.
If someone can help me to get my phone working again it would really help because i can't even use it.
PS: Sorry for my english.

Try to write another ROM on your sdcard(for example CM7a8.1) and install it from recovery

DoR2 said:
Try to write another ROM on your sdcard(for example CM7a8.1) and install it from recovery
Click to expand...
Click to collapse
Yeah, take your Micro SD out and put another update.zip on it. Then go into recovery hold Volume Up+Volume Down+Home and Power. Flash ROM and hopefully it'll work

Trying changing USB ports or rebooting your pc
Cheers
Sent from my GT-i9003 powered by Stable and Smooth CyanogenMod 9!

follow bscrazes advice, try other usb ports and then reboot your pc and try again, if that doesnt work still;
enter recoverymode (hold down both volume keys, power button and center button) then go to mounts and storage and choose usb mass storage device.
then plug it into your computer, it should just recognise it as a mass storage device, from here open folders and place a good update zip on it. suggested cm7a8.1
then apply update from zip.
this should work,
if you get errors doing this reply here and we shall try help

you need to re-install the driver....

J.Purungrit said:
you need to re-install the driver....
Click to expand...
Click to collapse
I agree
Sent from my GT-I5800 using xda premium

Though I'm giving the advice a bit late try the following
first uninstall all samsung stuff (even drivers) from your computer.
Then as Jason-EX said install usb drivers for samsung mobile
If you are unable to get to recovery try the following:
When the phone is powered off press power,volume down and home button simultaneously (now you should directly enter download mode)
connect it to computer now odin will recognise your phone
Flash some stable rom or kernel
I had the same problem once and this procedure worked
For the driver - http://drivers.softpedia.com/get/MOBILES/Samsung/SAMSUNG-USB-Driver-1480.shtml (if at all windows doesn't download it)

if u hav all the drivers installed and still ur phone cant b detected in download mode ...den u gotta usb problm buddy...try changing the usb cable or try in different ports ...that might work.

[HELP] Galaxy Tab 2 10.1 bricked

Hi guys,
I was going to flash the stock firmware to my tab from the resurrection remix rom, so i went to the recovery (for some reason there was the cyanogenmod recovery and not the TWRP) and wiped everything with the system too.
I downloaded the stock rom and went to download mode and connected to odin and nothing happens... My PC , that i always used with odin and this tablet, now doesn't recognize my tablet, nothing, no notification or sound when i connect to it. I thought it was the cable though it worked for charging so i bought a replacement today but didn't work too... tryed to a different pc too ...
Now I'm stuck with a bricked tablet because there is no OS, with a ****ty recovery (the cyanogenmod one) and no computers detect the device by USB...
Is there something that I can do to save this tablet?

lukigno95 said:
Hi guys,
I was going to flash the stock firmware to my tab from the resurrection remix rom, so i went to the recovery (for some reason there was the cyanogenmod recovery and not the TWRP) and wiped everything with the system too.
I downloaded the stock rom and went to download mode and connected to odin and nothing happens... My PC , that i always used with odin and this tablet, now doesn't recognize my tablet, nothing, no notification or sound when i connect to it. I thought it was the cable though it worked for charging so i bought a replacement today but didn't work too... tryed to a different pc too ...
Now I'm stuck with a bricked tablet because there is no OS, with a ****ty recovery (the cyanogenmod one) and no computers detect the device by USB...
Is there something that I can do to save this tablet?
Click to expand...
Click to collapse
You tried the different cable/port combos? Weird that Odin doesn't see tab.

champ1919 said:
You tried the different cable/port combos? Weird that Odin doesn't see tab.
Click to expand...
Click to collapse
yep tryed too... odin with other devices works

lukigno95 said:
yep tryed too... odin with other devices works
Click to expand...
Click to collapse
There is a project called "forget windows use linux" (google it). It might help.

EDITouble post sorry

john99ap said:
There is a project called "forget windows use linux" (google it). It might help.
Click to expand...
Click to collapse
I downloaded it and used in live USB but Odin and adb commands don't work there too...

lukigno95 said:
Hi guys,
I was going to flash the stock firmware to my tab from the resurrection remix rom, so i went to the recovery (for some reason there was the cyanogenmod recovery and not the TWRP) and wiped everything with the system too.
I downloaded the stock rom and went to download mode and connected to odin and nothing happens... My PC , that i always used with odin and this tablet, now doesn't recognize my tablet, nothing, no notification or sound when i connect to it. I thought it was the cable though it worked for charging so i bought a replacement today but didn't work too... tryed to a different pc too ...
Now I'm stuck with a bricked tablet because there is no OS, with a ****ty recovery (the cyanogenmod one) and no computers detect the device by USB...
Is there something that I can do to save this tablet?
Click to expand...
Click to collapse
did you tried heimdall??
https://glassechidna.com.au/heimdall/
Sent from my PRA-LX1 using XDA Labs

smart-t78 said:
did you tried heimdall??
https://glassechidna.com.au/heimdall/
Sent from my PRA-LX1 using XDA Labs
Click to expand...
Click to collapse
Yup tryed with heidmall too, it doesn't detect it

lukigno95 said:
Yup tryed with heidmall too, it doesn't detect it
Click to expand...
Click to collapse
try to install the last official lineage13 build. download it and put it on your SD.
if it works, install official twrp app from play store and replace cyanogen recovery with twrp.
Sent from my PRA-LX1 using XDA Labs

smart-t78 said:
try to install the last official lineage13 build. download it and put it on your SD.
if it works, install official twrp app from play store and replace cyanogen recovery with twrp.
Sent from my PRA-LX1 using XDA Labs
Click to expand...
Click to collapse
I have put the rom on sd card and twrp too but there isn't an option to install it, i mean there is only adb sideload (that doesn't work because can't connect to pc) and apply update that looks only in /data/media path and it doesn't let me go to the sd card

lukigno95 said:
I have put the rom on sd card and twrp too but there isn't an option to install it, i mean there is only adb sideload (that doesn't work because can't connect to pc) and apply update that looks only in /data/media path and it doesn't let me go to the sd card
Click to expand...
Click to collapse
I am not sure if this is going to help but it might be worth a try -> https://forum.xda-developers.com/showthread.php?t=2586472&page=16
Download links in op don't work, search in the replies for the files.

Bro thank you very much for your help, at the end I tried buying a 3rd cable that worked it was a cable problem. At the beginning i bought a chinese 2€ aftermarket cable that probably only had connections for charging, later I bought a new cable from amazon that I got today and worked like a charm when i put in the computer )))))

lukigno95 said:
Bro thank you very much for your help, at the end I tried buying a 3rd cable that worked it was a cable problem. At the beginning i bought a chinese 2€ aftermarket cable that probably only had connections for charging, later I bought a new cable from amazon that I got today and worked like a charm when i put in the computer )))))
Click to expand...
Click to collapse
welcome back:laugh:
Sent from my PRA-LX1 using XDA Labs