Brick note 10.1 no CWM or Odin - Galaxy Note 10.1 Q&A, Help & Troubleshooting

Hi guys, today I was trying to install the new Android Revolution HD v8 and the f***** aroma fails....
So, my tab is stuck on a bootloop on samsung logo, the fact is that if I press vol + or - nothing appear...neither CWM recovery, neither dowload mode. It just reboot continually when I press the power button.
My pc makes a sound when I plug it into the usb port, but I have no idea what I have to do...someone can help me?
Thanks

eddy2302 said:
Hi guys, today I was trying to install the new Android Revolution HD v8 and the f***** aroma fails....
So, my tab is stuck on a bootloop on samsung logo, the fact is that if I press vol + or - nothing appear...neither CWM recovery, neither dowload mode. It just reboot continually when I press the power button.
My pc makes a sound when I plug it into the usb port, but I have no idea what I have to do...someone can help me?
Thanks
Click to expand...
Click to collapse
Try turning it off by long pressing the power button untill the screen goes off .... then follow the steps to open CWM ... press the power and volume up until Samsung Galaxy Note 10.1 logo appears then stop pressing the power and keep pressing vol up and if it fails try with another turn off ... because trying to open CWM when the samsung logo is there wont work

Try to install again but if it fails again I'd try to re-download the rom... Hope you have an sd card reader cos the note WON'T be recognised by the PC....
You could also try to do a factory reset, format system, data and sd card, remove your external card before doing this so you don't accidentally loose everything there...

ok guys, fortunatly my note woke up and decided to enter in download mode...i flash the phil touch recovery and upgraded to the v8!
Many thanks to @wolvie80 who helped me :laugh:
Cheers and thanks to the other guys who wrote there

Related

[Q] Problem Installing Clockwordmod

I just got my g tab today and tried to install clockwork mod following the guide. device detected the recovery key and went into the install screen but immediately rebooted and now when i try to install it doesnt even detect the recovery key. the viewsonic splash screen comes up when i hold power and vol + buttons and then shuts off immediately, but if i try a normal powerup i get the stock UI. I know this is a stupid question but i am new to this so some help would be appreciated.
thanks

[Q] Help for my Huawei Ideos U8150

Hi all,
I was trying to install a new Rom Dronix 0.4. Upon entering the bootloader I accidentaly somehow no idea how,deleted clockwork mod recovery that was on there and now just can't get into bootloader mode or even get my phone to start up past the 1st screen.I've tried volume up +green button and power button to try to get in,volume down + end call red button and power button no go.The only thing it goes into is if I hold the volume down button + call green button and power which takes me to the firmware update but just flashes and says unpack failed.The other thing is that if press the red and green buttons for calls and the power button it brings the screen to a purplish colour but does nothing as well.I've tried to get the computer to recognize the phone but it won't even after installing the usb drivers with windows xp and windows 7.Atm there is no ROM on the phone after deleting it,cache and dalvik cache. It's just empty with not even a bootloader to try and boot into, only hardware is available now.
I'm at a loss as to what and any help if trying to get it back and running would be appreciated.
Thanks,
Paul
Flash UltraJack recovery from the PC.
http://forum.xda-developers.com/showthread.php?t=908178
hello, i think you kinda deleted the boot!!
try following instructions on this
http://forum.xda-developers.com/showthread.php?t=1011527
ITS SAYS UPDATE FAILS CUASE YOU DONT HAVE THE FIRMWARE on YOUR SD CARD>>>DO YOU???? JUST GO TO THEAD AND FOLLOW INSTRUCTIONS AND LET ME KNW!
YOU SIR ARE A CHAMPION!!!!!!!! If ever you are in Sydney, Australia I'll be treating you a few beers if you do drink heh.
Again THANK YOU!!!!

[HELP] [Samsung GT-S5570] I have no access to recovery after a flash CWM

Good morning.
Firstly please excuse my English...
Let me explain my problem.
With the idea of ​​making a backup of the rom galaxy s5570 mini for my wife before passing on gingerbread, (actually on android 2.1), I wanted to flash the recovery.
The original recovery worked well, I tested it.
I followed the directions for Roms customs:
-Odin installed
-installed the samsung drivers (Kies)
-download "tass-recovery-cwm.tar"
file-TASS_v1.0.ops
-started in download mode
-put the file or run it is necessary and all in Odin and start ...
Odin said OK
The phone will restart ...
I turn off, I test and I have no access to recovery. The phone is fixed on the screen "Samsung ..."
Basically no way to access the recovery. I tried to reboot directly with QuickBoot, it does not work more.
I redid the procedure a second time just in case ... it makes no difference.
I re-download the various files, TASS.OPS, the recovery, the Samsungs drivers (on samsfirmware this time) ... nothing better.
So now, if someone can help me ...
no ideas to help me?
i've tried to flash recovery too with odin and tass-recovery-cwm.tar, only thing what happens when i try to go in recovery is showing me:
RAMDUMP Mode ( ARM9 mode) and the Samsung logo.. it's just staying there nothing else and what i can do is use power button to reboot in normal mode which boots without a problem.
Later Edit: i've just played with the phone and it seems i can boot in recovery. after a 1st fail trying to boot in recovery (the stucked Samsung logo) i hold power button, the phone reboots and when i see Samsung i press the 3 keys and it goes in recovery.
Later Edit 2: so after more playing with the phone i figured that it will boot in recovery if you press only Home + Power keys, and not as many say VolUP + Home + Power.
Falconfalc said:
i've tried to flash recovery too with odin and tass-recovery-cwm.tar, only thing what happens when i try to go in recovery is showing me:
RAMDUMP Mode ( ARM9 mode) and the Samsung logo.. it's just staying there nothing else and what i can do is use power button to reboot in normal mode which boots without a problem.
Later Edit: i've just played with the phone and it seems i can boot in recovery. after a 1st fail trying to boot in recovery (the stucked Samsung logo) i hold power button, the phone reboots and when i see Samsung i press the 3 keys and it goes in recovery.
Later Edit 2: so after more playing with the phone i figured that it will boot in recovery if you press only Home + Power keys, and not as many say VolUP + Home + Power.
Click to expand...
Click to collapse
I tired ur solution..but it didn`t works on mine..
the home key + power button = stuck on samsung logo
home key + vol up + power button = ARM9 Mode
any others solution else??
Hi, to me it happens the same thing but why? someone can help us?
Ah I see I am not alone in this problem. Should be well end up finding a solution.
I would really like to backup my original rom.
And in addition the cwm is also used to flash roms ...
And with all super talented hackers phone on this forum, there should be a solution
Too bad RomCleaner is not compatible with this phone ...
{w~w. androidiani. c~m/forum/modding-samsung-galaxy-next/54898-guida-flash-rom-stock-gingerbread-2-3-4-root. h~ml}
change ~ to what is needed and delete spaces.
(I cannot link addresses because I'm a newbe....
:-(
!!! CWM will not work on Samnsug GT-S5570 !!!
- my phone was sent back for unbrick it, stuck on Samsung logo -
...so we cannot make a backup of our ROM...
PWR + central => Samsung Recovery
PWR + VolDown + central => Download Mode
PWR hold on for 4 sec => reboot
<what else ?>
What is RAMDUMP Mode ?
What is Quickboot ?
i have the same issue & i can't find any solution
Hi i also got this problem before. Just wan to share. CWM not working with the froyo 2.2(maybe depend on phone) i also got same problem with ur.. Just upgrade to gingerbread first then use the CWM everthing should be fine..
Due to new users i cant post any link.
Just pm me who want link update to gingerbread or you all can just search in here because that i wan to post outside link. thanks for understand..
Ok thank you, good news. I will try to pass on ginger ...
I wanted to do a backup before, but hey, I would not do it and that's it ..
Well after many having difficulty in passing on gingerbread, CWM actually works ... better. Thank you for the tip.
At least he started ... but impossible to make a backup ... it makes me an error message .... pfff ....
There might still be a way...,!
there might still be an alternative way than taking your phone into a samsung service center.., if you can still boot to download mode.. you can still revive your phone...,! flash it with Odin using the Gingerbread rom...,
wish I can help...,
sorry for necroing this thread .. but this thing just happened to my 5570 .. after flashing cwm .. i dont have access to recovery .. just as the 1st post says ..

[Q] Its new and big problem.. Galaxy fit not working at all

I started kies and after connecting my Galaxy FIT, I started upgrading the firmware it showed. Then it stopped and asked for emergency recovery. I did it, but it stopped again and phone got switched off and after that it is only showing a error sign with yellow triangle between a PC and mobile. It is not showing anything else though I have tried switching off and taking out battery. It is not working at all, just the error sign. Please help.
Sounds like a "soft Bricked" phone.
Can you boot in to download mode?
Press Volume Down + Home Key (middle button) + Power Button at the same time.
If the phone boots you into download mode (a yellow triagle with a digging android) with words "Downloading"....
Then you can still revive your phone.
this happened to me once..but later i tried pulling off the battery and restarting the sysytem...
try to take off the battrery and plug it again and try to go in DOWNLOAD MODE!..(i did it 2 or 3 times)
..and its definitely not a "SOFT BRICK" '!!
galaxy fit + CM7.1 (2.3.7) + 801Mhz
same happened to me
when first i flashed cyanogen 7.1 , 2.3.7 it happened to me, i just give tha droid a factory reset then following the instructions i flashed the rom from sd card via recovery then when reboot , just came up the cyanogen logo then tha lil letters(android) but just sttoped there no more, i taked out the lbatt, twice, then the alert logo came up......i was so scared.....sh-t !
but then i just remember to go to download mode pressing home , volume + and on/off then i reflash via odin but nothin happened, then y reestart the fir then i try to open in recovery i pushed home key and on/off and the cyanogen recovery just started i gave the phone again not only a data factory reset but, cache and the battery and everything i could reset, then i do it again thru recovery i flased the cyanogen and at las it works, i think like richard says was a soft bricked, try everything , via odin, via recovery.......
i thanks neil cause he helped me a lot!!!

PB, LG optimus 3D only boot in CWM

Hello everbody, I have a problem with my phone an I hope you will be able to help me. I want to appologies myself for my english, I'm French
My phone only boot in the CWM menu (where i can choose if y want reset the factory profil,...) I hope you understand me.
I would like to unistal CWM but i don't know how.
I try installing o stock recovery from my SD card but it didn't work.
I really hope you will be able to help me if you need any other information juste ask
hello everyone, I am experiencing the same problem. After the OTA update when the phone restarted, it ended in the CWM menu and it is impossible to restart the system it always ends in the recovery mode, wanting an update.zip file that doesn't exist. Can anyone help please
Try to update with this method
http://forum.xda-developers.com/showpost.php?p=18082599&postcount=1
Plug phone in dowload mode (power off phone then vol up + power,if you see lg logo release buttons)
adixtra said:
Try to update with this method
http://forum.xda-developers.com/showpost.php?p=18082599&postcount=1
Plug phone in dowload mode (power off phone then vol up + power,if you see lg logo release buttons)
Click to expand...
Click to collapse
As i said before, the phone stays in the cwm recovery menu and doesn't do anything else. If i turn off the phone and then restart it while pressing the power button and the + button volume, it is detected by the pc and installs the drivers, but nothing else.
If i try to use your method, it doesn't communicate with the pc, phone disconnected, unavailable.
Isn't there any other way..
Ok I've managed to flash the phone. just needed windows xp to work correctly with the drivers.
thanks
adixtra said:
Try to update with this method
http://forum.xda-developers.com/showpost.php?p=18082599&postcount=1
Plug phone in dowload mode (power off phone then vol up + power,if you see lg logo release buttons)
Click to expand...
Click to collapse
Thanks to take time to help me. I've try following the step on your link but on the last step, when the official LG flasher is running, I have an message saying that my phone isn't connect with my computer.
Try to reinstall drives.Remove battery, plug phone to computer, press vol+ button and insert battery.
Is the phone suppose to turn on when i put the battery in?
If you put battery and you keep VOL up ,the phone should start in download mode.
I've succesfuly did it, my phone is working again, thanks a lot.

Categories

Resources