[Q] Its new and big problem.. Galaxy fit not working at all - Samsung Galaxy Fit GT 5670

I started kies and after connecting my Galaxy FIT, I started upgrading the firmware it showed. Then it stopped and asked for emergency recovery. I did it, but it stopped again and phone got switched off and after that it is only showing a error sign with yellow triangle between a PC and mobile. It is not showing anything else though I have tried switching off and taking out battery. It is not working at all, just the error sign. Please help.

Sounds like a "soft Bricked" phone.
Can you boot in to download mode?
Press Volume Down + Home Key (middle button) + Power Button at the same time.
If the phone boots you into download mode (a yellow triagle with a digging android) with words "Downloading"....
Then you can still revive your phone.

this happened to me once..but later i tried pulling off the battery and restarting the sysytem...
try to take off the battrery and plug it again and try to go in DOWNLOAD MODE!..(i did it 2 or 3 times)
..and its definitely not a "SOFT BRICK" '!!
galaxy fit + CM7.1 (2.3.7) + 801Mhz

same happened to me
when first i flashed cyanogen 7.1 , 2.3.7 it happened to me, i just give tha droid a factory reset then following the instructions i flashed the rom from sd card via recovery then when reboot , just came up the cyanogen logo then tha lil letters(android) but just sttoped there no more, i taked out the lbatt, twice, then the alert logo came up......i was so scared.....sh-t !
but then i just remember to go to download mode pressing home , volume + and on/off then i reflash via odin but nothin happened, then y reestart the fir then i try to open in recovery i pushed home key and on/off and the cyanogen recovery just started i gave the phone again not only a data factory reset but, cache and the battery and everything i could reset, then i do it again thru recovery i flased the cyanogen and at las it works, i think like richard says was a soft bricked, try everything , via odin, via recovery.......
i thanks neil cause he helped me a lot!!!

Related

Permabircked Samsung Captivate ...

Hello all,
Yesterday I installed Firefly 2.7 on my Canadian Samsung Captivate. Everything worked fine except that I could not receive calls (when I did I lost connection and it hung up right away without me having the time to do anything).
What I did tonight is I tried to reinstall the stock firmeware found somehwere in here. I followed the instructions which asked me to instal it using Odin3 v1.7 which I did. What happened though is that right after I clicked start button in Odin, the installation failed so I was left with an incomplete install.
I was stuck in download mode and could not do anything with my device and my phone would not reboot so I removed the battery. Now I can't boot my phone no matter what I do, I can't connect it to the computer either. I tried the button combination to go in download mode (remove the battery, wait, press vol+ and - and power, connect the phone to pc, put the battery back in, take my finger of the power button) and nothing. No matter what I do or try my phone is not doing anything. It is turned off and it stays that way.
Is my phone now a piece of garbage ? Any idea what I could do ?
Thx in advance ...

[Q] Help for my Huawei Ideos U8150

Hi all,
I was trying to install a new Rom Dronix 0.4. Upon entering the bootloader I accidentaly somehow no idea how,deleted clockwork mod recovery that was on there and now just can't get into bootloader mode or even get my phone to start up past the 1st screen.I've tried volume up +green button and power button to try to get in,volume down + end call red button and power button no go.The only thing it goes into is if I hold the volume down button + call green button and power which takes me to the firmware update but just flashes and says unpack failed.The other thing is that if press the red and green buttons for calls and the power button it brings the screen to a purplish colour but does nothing as well.I've tried to get the computer to recognize the phone but it won't even after installing the usb drivers with windows xp and windows 7.Atm there is no ROM on the phone after deleting it,cache and dalvik cache. It's just empty with not even a bootloader to try and boot into, only hardware is available now.
I'm at a loss as to what and any help if trying to get it back and running would be appreciated.
Thanks,
Paul
Flash UltraJack recovery from the PC.
http://forum.xda-developers.com/showthread.php?t=908178
hello, i think you kinda deleted the boot!!
try following instructions on this
http://forum.xda-developers.com/showthread.php?t=1011527
ITS SAYS UPDATE FAILS CUASE YOU DONT HAVE THE FIRMWARE on YOUR SD CARD>>>DO YOU???? JUST GO TO THEAD AND FOLLOW INSTRUCTIONS AND LET ME KNW!
YOU SIR ARE A CHAMPION!!!!!!!! If ever you are in Sydney, Australia I'll be treating you a few beers if you do drink heh.
Again THANK YOU!!!!

[HELP] [Samsung GT-S5570] I have no access to recovery after a flash CWM

Good morning.
Firstly please excuse my English...
Let me explain my problem.
With the idea of ​​making a backup of the rom galaxy s5570 mini for my wife before passing on gingerbread, (actually on android 2.1), I wanted to flash the recovery.
The original recovery worked well, I tested it.
I followed the directions for Roms customs:
-Odin installed
-installed the samsung drivers (Kies)
-download "tass-recovery-cwm.tar"
file-TASS_v1.0.ops
-started in download mode
-put the file or run it is necessary and all in Odin and start ...
Odin said OK
The phone will restart ...
I turn off, I test and I have no access to recovery. The phone is fixed on the screen "Samsung ..."
Basically no way to access the recovery. I tried to reboot directly with QuickBoot, it does not work more.
I redid the procedure a second time just in case ... it makes no difference.
I re-download the various files, TASS.OPS, the recovery, the Samsungs drivers (on samsfirmware this time) ... nothing better.
So now, if someone can help me ...
no ideas to help me?
i've tried to flash recovery too with odin and tass-recovery-cwm.tar, only thing what happens when i try to go in recovery is showing me:
RAMDUMP Mode ( ARM9 mode) and the Samsung logo.. it's just staying there nothing else and what i can do is use power button to reboot in normal mode which boots without a problem.
Later Edit: i've just played with the phone and it seems i can boot in recovery. after a 1st fail trying to boot in recovery (the stucked Samsung logo) i hold power button, the phone reboots and when i see Samsung i press the 3 keys and it goes in recovery.
Later Edit 2: so after more playing with the phone i figured that it will boot in recovery if you press only Home + Power keys, and not as many say VolUP + Home + Power.
Falconfalc said:
i've tried to flash recovery too with odin and tass-recovery-cwm.tar, only thing what happens when i try to go in recovery is showing me:
RAMDUMP Mode ( ARM9 mode) and the Samsung logo.. it's just staying there nothing else and what i can do is use power button to reboot in normal mode which boots without a problem.
Later Edit: i've just played with the phone and it seems i can boot in recovery. after a 1st fail trying to boot in recovery (the stucked Samsung logo) i hold power button, the phone reboots and when i see Samsung i press the 3 keys and it goes in recovery.
Later Edit 2: so after more playing with the phone i figured that it will boot in recovery if you press only Home + Power keys, and not as many say VolUP + Home + Power.
Click to expand...
Click to collapse
I tired ur solution..but it didn`t works on mine..
the home key + power button = stuck on samsung logo
home key + vol up + power button = ARM9 Mode
any others solution else??
Hi, to me it happens the same thing but why? someone can help us?
Ah I see I am not alone in this problem. Should be well end up finding a solution.
I would really like to backup my original rom.
And in addition the cwm is also used to flash roms ...
And with all super talented hackers phone on this forum, there should be a solution
Too bad RomCleaner is not compatible with this phone ...
{w~w. androidiani. c~m/forum/modding-samsung-galaxy-next/54898-guida-flash-rom-stock-gingerbread-2-3-4-root. h~ml}
change ~ to what is needed and delete spaces.
(I cannot link addresses because I'm a newbe....
:-(
!!! CWM will not work on Samnsug GT-S5570 !!!
- my phone was sent back for unbrick it, stuck on Samsung logo -
...so we cannot make a backup of our ROM...
PWR + central => Samsung Recovery
PWR + VolDown + central => Download Mode
PWR hold on for 4 sec => reboot
<what else ?>
What is RAMDUMP Mode ?
What is Quickboot ?
i have the same issue & i can't find any solution
Hi i also got this problem before. Just wan to share. CWM not working with the froyo 2.2(maybe depend on phone) i also got same problem with ur.. Just upgrade to gingerbread first then use the CWM everthing should be fine..
Due to new users i cant post any link.
Just pm me who want link update to gingerbread or you all can just search in here because that i wan to post outside link. thanks for understand..
Ok thank you, good news. I will try to pass on ginger ...
I wanted to do a backup before, but hey, I would not do it and that's it ..
Well after many having difficulty in passing on gingerbread, CWM actually works ... better. Thank you for the tip.
At least he started ... but impossible to make a backup ... it makes me an error message .... pfff ....
There might still be a way...,!
there might still be an alternative way than taking your phone into a samsung service center.., if you can still boot to download mode.. you can still revive your phone...,! flash it with Odin using the Gingerbread rom...,
wish I can help...,
sorry for necroing this thread .. but this thing just happened to my 5570 .. after flashing cwm .. i dont have access to recovery .. just as the 1st post says ..

[Q] Help Nexus S Totally Bricked!

Please help if you can, would really appreciate, dont know how to unbick my totally F$$$$### Nexus S Phone.
Even in recovery/fastboot mode on my Nexus S (Vol up+power), I cannot get my system to recognize the device....in fact, even in Windows, I am not able to get the system to recognize my device in Recovery mode/Fastboot mode....the only way it will recognize the device is if it is turned on the normal way, and hangs on the "Google unlocked icon" screen.
Some background info:
My power button recently stopped working...I thought it had to do with the fact that I updated NexusTools (was running a CyberGR rom...cant remember the name...had V4 Ultimate in it (downloaded from Rom Manager)).
So what I did was download/install (from the same developer) their hybrid ics rom....that did not brick it...but it also did not fix the power button...so after not liking the new rom, and the fact that it didnt fix my power button, I reflashed to the original rom I had installed (wiped everything, including doing a factory reset), and it just hung on "Google unlocked icon"
Now my phone does the following:
- First of all, the only way to power the device up is to plug it in (it automatically turns on and tries to boot without me pressing the non-functional power button)
- If I let it try to boot, it infinity hangs on the Google unlocked icon screen
- If I boot into recovery (by holding vol up button and plugging the phone into a power source), it hangs on the recovery screen...meaning the power button, as well as the volume buttons, as well as any buttons are non responsive.
- If I boot into recovery, the device doesnt even register on my system....
What am I doing wrong? What can I do to try and fix this?
I would truly appreciate if anyone reading this has some insights for me.
THANKS!!
Knightsage said:
Please help if you can, would really appreciate, dont know how to unbick my totally F$$$$### Nexus S Phone.
Even in recovery/fastboot mode on my Nexus S (Vol up+power), I cannot get my system to recognize the device....in fact, even in Windows, I am not able to get the system to recognize my device in Recovery mode/Fastboot mode....the only way it will recognize the device is if it is turned on the normal way, and hangs on the "Google unlocked icon" screen.
Some background info:
My power button recently stopped working...I thought it had to do with the fact that I updated NexusTools (was running a CyberGR rom...cant remember the name...had V4 Ultimate in it (downloaded from Rom Manager)).
So what I did was download/install (from the same developer) their hybrid ics rom....that did not brick it...but it also did not fix the power button...so after not liking the new rom, and the fact that it didnt fix my power button, I reflashed to the original rom I had installed (wiped everything, including doing a factory reset), and it just hung on "Google unlocked icon"
Now my phone does the following:
- First of all, the only way to power the device up is to plug it in (it automatically turns on and tries to boot without me pressing the non-functional power button)
- If I let it try to boot, it infinity hangs on the Google unlocked icon screen
- If I boot into recovery (by holding vol up button and plugging the phone into a power source), it hangs on the recovery screen...meaning the power button, as well as the volume buttons, as well as any buttons are non responsive.
- If I boot into recovery, the device doesnt even register on my system....
What am I doing wrong? What can I do to try and fix this?
I would truly appreciate if anyone reading this has some insights for me.
THANKS!!
Click to expand...
Click to collapse
yes, sounds like a dead power button(i have one myself).
try going back into your recovery, do a full data wipe(factory reset), then reflash the rom(and gapps). if still nothing, redownload the rom and try again. in your recovery, there is an usb option. use it to transfer your newly downloaded rom from your computer to phone.
Once I am in recovery mode it "freezes" though...as in not even the volume buttons work...they worked fine before, and even work to get into recovery mode...but once there they no longer work...nor does connecting the device in recovery mode to my laptop....so im kind of at a loss, as I cant even use Fastboot/adb to wipe/push anything on the Nexus S through my laptop
Knightsage said:
Once I am in recovery mode it "freezes" though...as in not even the volume buttons work...they worked fine before, and even work to get into recovery mode...but once there they no longer work...nor does connecting the device in recovery mode to my laptop....so im kind of at a loss, as I cant even use Fastboot/adb to wipe/push anything on the Nexus S through my laptop
Click to expand...
Click to collapse
im guessing that your using cwm recovery?
give your phone a few smacks on the back near the power button, your phone thinks its being pressed in.
yes, it definitely thinks it is being pressed in...thats for sure...and makes sense...ill try that haha!
Yes latest CWM Recovery...5.0.2 or something like that...just updated that before phone died...
Weird...so i "smacked" the phone a bit...when I do it in recovery mode, it reboots the phone into recovery....so it definitely thinks its being pressed down constantly...but I have found no way to make it "un-pressed"...only briefly by smacking it...
Knightsage said:
yes, it definitely thinks it is being pressed in...thats for sure...and makes sense...ill try that haha!
Yes latest CWM Recovery...5.0.2 or something like that...just updated that before phone died...
Click to expand...
Click to collapse
in twrp recovery, theres an option to not use the power button to select(thats what im using), is there a similar option in the newer cwm recovery? tr\y pressing the soft buttons). also, see if sticking a fingernail in between the power button helps, to pull out the button a bit.
After continuingto smack it...as well as "pulling" on the power button, I am not able to use volume buttons and power buttons within recovery...flashing a new rom now...will let you know if that fixes it...otherwise I will try unbickable in ubuntu again and see if that fixes it thanks for the pro-tip of smacking it, haha!

Brick note 10.1 no CWM or Odin

Hi guys, today I was trying to install the new Android Revolution HD v8 and the f***** aroma fails....
So, my tab is stuck on a bootloop on samsung logo, the fact is that if I press vol + or - nothing appear...neither CWM recovery, neither dowload mode. It just reboot continually when I press the power button.
My pc makes a sound when I plug it into the usb port, but I have no idea what I have to do...someone can help me?
Thanks
eddy2302 said:
Hi guys, today I was trying to install the new Android Revolution HD v8 and the f***** aroma fails....
So, my tab is stuck on a bootloop on samsung logo, the fact is that if I press vol + or - nothing appear...neither CWM recovery, neither dowload mode. It just reboot continually when I press the power button.
My pc makes a sound when I plug it into the usb port, but I have no idea what I have to do...someone can help me?
Thanks
Click to expand...
Click to collapse
Try turning it off by long pressing the power button untill the screen goes off .... then follow the steps to open CWM ... press the power and volume up until Samsung Galaxy Note 10.1 logo appears then stop pressing the power and keep pressing vol up and if it fails try with another turn off ... because trying to open CWM when the samsung logo is there wont work
Try to install again but if it fails again I'd try to re-download the rom... Hope you have an sd card reader cos the note WON'T be recognised by the PC....
You could also try to do a factory reset, format system, data and sd card, remove your external card before doing this so you don't accidentally loose everything there...
ok guys, fortunatly my note woke up and decided to enter in download mode...i flash the phil touch recovery and upgraded to the v8!
Many thanks to @wolvie80 who helped me :laugh:
Cheers and thanks to the other guys who wrote there

Categories

Resources