I just got my g tab today and tried to install clockwork mod following the guide. device detected the recovery key and went into the install screen but immediately rebooted and now when i try to install it doesnt even detect the recovery key. the viewsonic splash screen comes up when i hold power and vol + buttons and then shuts off immediately, but if i try a normal powerup i get the stock UI. I know this is a stupid question but i am new to this so some help would be appreciated.
thanks
Related
Hi all,
I was trying to install a new Rom Dronix 0.4. Upon entering the bootloader I accidentaly somehow no idea how,deleted clockwork mod recovery that was on there and now just can't get into bootloader mode or even get my phone to start up past the 1st screen.I've tried volume up +green button and power button to try to get in,volume down + end call red button and power button no go.The only thing it goes into is if I hold the volume down button + call green button and power which takes me to the firmware update but just flashes and says unpack failed.The other thing is that if press the red and green buttons for calls and the power button it brings the screen to a purplish colour but does nothing as well.I've tried to get the computer to recognize the phone but it won't even after installing the usb drivers with windows xp and windows 7.Atm there is no ROM on the phone after deleting it,cache and dalvik cache. It's just empty with not even a bootloader to try and boot into, only hardware is available now.
I'm at a loss as to what and any help if trying to get it back and running would be appreciated.
Thanks,
Paul
Flash UltraJack recovery from the PC.
http://forum.xda-developers.com/showthread.php?t=908178
hello, i think you kinda deleted the boot!!
try following instructions on this
http://forum.xda-developers.com/showthread.php?t=1011527
ITS SAYS UPDATE FAILS CUASE YOU DONT HAVE THE FIRMWARE on YOUR SD CARD>>>DO YOU???? JUST GO TO THEAD AND FOLLOW INSTRUCTIONS AND LET ME KNW!
YOU SIR ARE A CHAMPION!!!!!!!! If ever you are in Sydney, Australia I'll be treating you a few beers if you do drink heh.
Again THANK YOU!!!!
Ok so today my triumph stopped responding so i restarted it (took out the battery). then rebooted. upon reboot phone shuts down and now will hang at the motorola logo for about 10 min before boots but will shut back down due to the battery being dead(but had full charge when this started). Dont know what happened. So i try to get into clockworkmod to flash backup. cant get into it. the only thing i can do is get to the recovery.img file(pressing power+volume down). Other than that nothing.
also tried to boot with power pluged in. it stayed on but would not respond to any touches or button press except the lock button.
I have cwm 5.0.2.6 installed and tickerguy's cm7.
never had this problem till today. Any help would be appreciated.
a new development has occurred. now when i try to access recovery, the phone will just vibrate without stopping.
and i believe its stuck in a boot loop but without recovery i dont know anyway to exit the loop.
Are you able to get into download mode (power off then simultaneously press power button & vol- (should show polling))
Sent from my Triumph using xda premium
Yes i am able to get to download mode
Well after some tinkering (replacing the recovery image, assuming something corrupted it) i can now get to recovery, still takes 10 min to load it though. But i am unable to do anything in recovery because i have to press the menu button to confirm selection but the buttons wont respond. Some help would be appreciated.
Hello guys, my TF300 has been rooted since it came out and i've only used AOKP rom and I have a fast boot app that I use to go into recovery mode or if need me I would just do the vol up and power.
Today I wanted to change my rom and I notice my fast boot wasn't going into recovery it just rebooted the tablet. so I tried the vol up and power and I just get a black screen, finally when I stop holding the buttons, it just reboots again.
I thought I lost root some how but so I opened some apps where I need root and they work and if I long press the power the built in recover that was there is no longer and when I turn it off and back on it still says "unlock" in the top left
the next thing I tried was I went into the playstore and download the goomanager and tried to download the TWRP 2 but it told me nothing is avail for my system.
As far as i know the only way To enter recovery is to restart or power on the tablet while holding down the vol down button then press the vol up when prompted. otherwise tablet will always fully restart.
Sent from my SGH-I717 using xda app-developers app
philly0128 said:
Hello guys, my TF300 has been rooted since it came out and i've only used AOKP rom and I have a fast boot app that I use to go into recovery mode or if need me I would just do the vol up and power.
Today I wanted to change my rom and I notice my fast boot wasn't going into recovery it just rebooted the tablet. so I tried the vol up and power and I just get a black screen, finally when I stop holding the buttons, it just reboots again.
I thought I lost root some how but so I opened some apps where I need root and they work and if I long press the power the built in recover that was there is no longer and when I turn it off and back on it still says "unlock" in the top left
the next thing I tried was I went into the playstore and download the goomanager and tried to download the TWRP 2 but it told me nothing is avail for my system.
Click to expand...
Click to collapse
From terminal on unit!
su
reboot recovery
Good Luck!
if that fails then
#!/system/bin/sh
su
reboot recovery
Thanks guys, not sure what happen, look like it was a issue with my vol down button, it's like it was stuck so when I thought I was pressing it, I wasn't so now i'm good to go.
Hi guys, today I was trying to install the new Android Revolution HD v8 and the f***** aroma fails....
So, my tab is stuck on a bootloop on samsung logo, the fact is that if I press vol + or - nothing appear...neither CWM recovery, neither dowload mode. It just reboot continually when I press the power button.
My pc makes a sound when I plug it into the usb port, but I have no idea what I have to do...someone can help me?
Thanks
eddy2302 said:
Hi guys, today I was trying to install the new Android Revolution HD v8 and the f***** aroma fails....
So, my tab is stuck on a bootloop on samsung logo, the fact is that if I press vol + or - nothing appear...neither CWM recovery, neither dowload mode. It just reboot continually when I press the power button.
My pc makes a sound when I plug it into the usb port, but I have no idea what I have to do...someone can help me?
Thanks
Click to expand...
Click to collapse
Try turning it off by long pressing the power button untill the screen goes off .... then follow the steps to open CWM ... press the power and volume up until Samsung Galaxy Note 10.1 logo appears then stop pressing the power and keep pressing vol up and if it fails try with another turn off ... because trying to open CWM when the samsung logo is there wont work
Try to install again but if it fails again I'd try to re-download the rom... Hope you have an sd card reader cos the note WON'T be recognised by the PC....
You could also try to do a factory reset, format system, data and sd card, remove your external card before doing this so you don't accidentally loose everything there...
ok guys, fortunatly my note woke up and decided to enter in download mode...i flash the phil touch recovery and upgraded to the v8!
Many thanks to @wolvie80 who helped me :laugh:
Cheers and thanks to the other guys who wrote there
I'm usually pretty good at following instructions but I have a problem. I am rooted with TWRP, stock kernel. I successfully applied the 4.4.1 update and used the phone for awhile no probs. Tried re-applying the 4 way reboot menu mod that I'd used successfully on 4.4.0. TWRP says flash was successful. I rebooted and am stuck at the spinning google colored circles. I cant get into recovery mode by holding the volume up/down and power buttons. The phone vibrates briefly when I hold all three but the logo keeps spinning. Pressing power button only does the same. Tried connecting to PC but mac says can't read device and to reboot it. ?help?
Update - Got her to reboot with volume down/pwer, into TWRP, and restored from backup, Back up and running...