Most of the times when I select USB storage in TWRP 2.5.0.0, nothing happens. The drive doesn't show up and nor does the USB attachment icon in the notification area of my PC. Works fine on other versions though. Any ideas?
djsubtronic said:
Most of the times when I select USB storage in TWRP 2.5.0.0, nothing happens. The drive doesn't show up and nor does the USB attachment icon in the notification area of my PC. Works fine on other versions though. Any ideas?
Click to expand...
Click to collapse
Works fine for me... try reflashing the recovery?
asdfasdfvful said:
Works fine for me... try reflashing the recovery?
Click to expand...
Click to collapse
I'd be more inclined to try another PC. Maybe some driver you installed is causing issues. When you mount your phone, go into your device manager and try deleting any phone devices or storage that appear, then reconnect and maybe it will install the correct driver.
el_smurfo said:
I'd be more inclined to try another PC. Maybe some driver you installed is causing issues. When you mount your phone, go into your device manager and try deleting any phone devices or storage that appear, then reconnect and maybe it will install the correct driver.
Click to expand...
Click to collapse
Maybe he could also try using a toolkit?
http://forum.xda-developers.com/showthread.php?t=1604677
Tried reflashing. In fact it even happened before I had my phone's motherboard replaced. Only on 2.5.0.0, regardless of which PC I use. Other versions of TWRP work fine.
djsubtronic said:
Most of the times when I select USB storage in TWRP 2.5.0.0, nothing happens. The drive doesn't show up and nor does the USB attachment icon in the notification area of my PC. Works fine on other versions though. Any ideas?
Click to expand...
Click to collapse
Somehow CWM/TWRP recoveries were always fu*** up for me when it comes to USB connection ... Theoretically it depends on your PC drivers when its not working and you got the newest version of TWRP.
I cannot access files via usb storage in twrp, an unknown device appears in device manager on pc it named "One S" but it's unknown and nowhere to find a f**in driver for it... I cannot install ANY os on the phone now and I'm feeling very stupid. OTG doesn't work I cannot tick USB OTG in Mount menu, what a damn phone..............
Related
hi, I just installed Vegan-Tab 5.1 and i tried to connect the USB to my computers (windows vista/xp) neither of them recognizes the removable disk. gtablet shows USB connected, and on my PC it asked for installing Nvidia Harmony driver, i dont have one so the system failed to install it. Then drive E: shows up, but when i click it it shows "please insert a disk into removable disk E:".
When i had the original TNT ROM although it prompted for install Nvidia Harmony but i can still access E:.
Please help.
Well I think you need to turn on USB storage on the tablet
Drag notification bar down and select files to copy to/from computer
Then enable USB storage
I just installed the same rom and am having the same problem. Can't find a way to get my computer to see the usb, it shows up, but asks for disc.
I'm also having the same issue, PC won't "see" the tablet
also USB thumb drives are not recognized anymore
Missing USB Flash
I'm having the same problem running Vegan 5.11 and it can't see a flash drive plugged into it.
Ed Kinsel
Big Ideas
Finally got BigIdeas installed and I don't have usb either. It shows up on the PC but it asks for a disk. When I (try) to enable it on the tab it just sits and the little icon turns like it's tryin but I get nothing? Any help would be appreciated. Thanks, Howie
turn on usb mass storage on you g tablet then wait about 30sec.sometimes it takes that long for my pc to allow access to the drive(im on win7 64bit).
dootle said:
turn on usb mass storage on you g tablet then wait about 30sec.sometimes it takes that long for my pc to allow access to the drive(im on win7 64bit).
Click to expand...
Click to collapse
No prompt comes up when PC is connect to device.....
Plug in USB................... nothing happens
Also, I noticed that when a SD Card is inserted, the text under >settings>SD Card & Device storage> READS "unmount in progress" after you mount the SDCARD
Now it's working
meandg5 said:
Finally got BigIdeas installed and I don't have usb either. It shows up on the PC but it asks for a disk. When I (try) to enable it on the tab it just sits and the little icon turns like it's tryin but I get nothing? Any help would be appreciated. Thanks, Howie
Click to expand...
Click to collapse
Went into CWM and mounted the USB drive, rebooted, and now it works fine?
Also, when I am in ES file explorer and I am navigated to the /sdcard
it reads ""sdcard unmounted or not present"
got it all figured out......
Still not seeing the flash
Does connect through the mini USB to the internal SD storage...
Anyone know id there's any docs for the Vegan system?
Ed Kinsel
dootle said:
turn on usb mass storage on you g tablet then wait about 30sec.sometimes it takes that long for my pc to allow access to the drive(im on win7 64bit).
Click to expand...
Click to collapse
I am a noobie, how do you enable this on Vegan tab ? TnT Lite had a prompt.
DLP-ROB said:
got it all figured out......
Click to expand...
Click to collapse
I'm having the same problem with the unmount in progress. Can you please tell me how you figured it out? I've done everything including nvflash, CWM, to start fresh and I still am making no progress.
Thanks
I had the same problem. Here is what worked for me.
1. Plug in your USB.
2. You should see the USB icon show up on the top left taskbar.
3. Swipe that taskbar downwards.
4. Click on "USB connected"
5. Click on the "Turn on USB Storage" icon on the bottom right of the screen.
6. Click "OK"
Your drive letter should be mapped on your PC, you should be able to drag and drop files. When you are done, just click the "Turn off USB Storage" icon. You can now disconnect your USB cable.
Hope that helps.
Thank you so much. This is simple once you know it, but I was completely stumped. Am still getting used to the UI.
Thanks! Saved me a lot of possible pain.
Thank you very much!!! Iwas in the same fix!
DLP-ROB said:
got it all figured out......
Click to expand...
Click to collapse
That posting is really helpful (sarcasm). How did you get it figured out?
I'm having the same problem and I'm not getting the USB connected symbol or any other notification from the tablet that the PC is connected.
I'm running CM with the clemsyn kernel 2.6.32.9.
I wiped and cleared everything (cache, SD Card...) from the settings in order to install the new Ice Cream rom which I got working but then wanted to clean everything up. So obviously after doing the formats, it also wiped the zip (icecream). I can access clock work recovery, but it doesn't recognize my USB at all, same machine and cable is fine. I am trying to do it as a USB Mass Storage device but still it cannot recognize it. Any help would me much appreciated.
namsu55 said:
I wiped and cleared everything (cache, SD Card...) from the settings in order to install the new Ice Cream rom which I got working but then wanted to clean everything up. So obviously after doing the formats, it also wiped the zip (icecream). I can access clock work recovery, but it doesn't recognize my USB at all, same machine and cable is fine. I am trying to do it as a USB Mass Storage device but still it cannot recognize it. Any help would me much appreciated.
Click to expand...
Click to collapse
I'm not sure if you mean SD storage and not USB but you should have never formatted your SD storage.
In clockworkmod recovery there is an option to mount the SD storage. Make sure its mounted and then try activating the USB storage again. This should give you the ability to add a ROM zip file on the SD storage so you can flash it.
Thanks for the reply. Basically I am in clockwork recovery mode, I mount the SDCARD, then I go and select the option "mount USB storage". Sometimes I find that it finds Android 1.0 and I see the I: come up but then goes away quite quickly. But most of the time it comes up as unrecognized.
Now I have 2 cables, both which charge the phone fine. I have used one on a BlackBerry and remember it does the job of connecting as a data connection fine. Also have tried my XP laptop, same result.
My feeling is that it may possibly be the actual USB port on the phone that is the problem but I am unsure in this. It never failed to connect when the phone was working properly (in an actual OS).
You should update your CWM... 5.0.2.0 is the latest version.
But anyway, you don't need to mount SD card then mount USB storage. Only need to do the latest. Once you do this, unplug and replug the phone, the drive should pop up.
polobunny said:
You should update your CWM... 5.0.2.0 is the latest version.
But anyway, you don't need to mount SD card then mount USB storage. Only need to do the latest. Once you do this, unplug and replug the phone, the drive should pop up.
Click to expand...
Click to collapse
When I go into clock work recovery it says USB device Unrecognized. Problem is I don't have anything on the SD I have the ROM on my computer. Whether I go to the mount USB storage menu or not. Unsure what to do?
namsu55 said:
When I go into clock work recovery it says USB device Unrecognized. Problem is I don't have anything on the SD I have the ROM on my computer. Whether I go to the mount USB storage menu or not. Unsure what to do?
Click to expand...
Click to collapse
I imagine you don't have a working adb setup on your computer to update CWM, right?
Boot into CWM with phone plugged in. Go to mount USB storage. If your "SD" isn't recognized, still on that screen, unplug and replug phone. It should get detected then.
Tried this several times keep getting Unknown Device. I installed the SDK with Google Drivers. Unsure if that is the ADB set up.
namsu55 said:
Tried this several times keep getting Unknown Device. I installed the SDK with Google Drivers. Unsure if that is the ADB set up.
Click to expand...
Click to collapse
Yes that's the adb setup.
You might need to manually install the drivers for your phone, although this shouldn't impact on the SD mounting capabilities. Just to make sure, I would get a working adb setup and use fastboot to update your Clockworkmod Recovery to 5.0.2.0.
You can follow this to know how to use fastboot
http://wiki.cyanogenmod.com/wiki/Fastboot#Flash_Custom_Recovery.img
If you have trouble getting your phone to be detected and the drivers installed, I suggest you use PDAnet drivers instead (if you're under Windows). Some phones for some reason need .inf driver hacking to get detected.
http://junefabrics.com/android/
I will give this a go many thanks.
polobunny said:
Yes that's the adb setup.
You might need to manually install the drivers for your phone, although this shouldn't impact on the SD mounting capabilities. Just to make sure, I would get a working adb setup and use fastboot to update your Clockworkmod Recovery to 5.0.2.0.
You can follow this to know how to use fastboot
http://wiki.cyanogenmod.com/wiki/Fastboot#Flash_Custom_Recovery.img
If you have trouble getting your phone to be detected and the drivers installed, I suggest you use PDAnet drivers instead (if you're under Windows). Some phones for some reason need .inf driver hacking to get detected.
http://junefabrics.com/android/
Click to expand...
Click to collapse
Just to let you know, I am trying to access USB Storage from clockwork recovery since I don't have any rom on here at all.
This may sound weird but I held the USB in the phone port in an angle, luckily the removable drive came up. I got the the ROM on the SD it has installed and loading. I'll see if its an issue with the USB on the phone later on but as long as it got back up and running (Ice Cream) for now.
Anyway thanks guys much appreciated. I'll be a lot more careful next time before I go around wiping everything especially the SD LOL.
namsu55 said:
Just to let you know, I am trying to access USB Storage from clockwork recovery since I don't have any rom on here at all.
Click to expand...
Click to collapse
I gathered this much from your posts.
Edit: Glad you got it working. Make sure you get CWM updated whenever you can if you haven't done so, this could lead to problems down the road to flash different zips.
polobunny said:
I gathered this much from your posts.
Edit: Glad you got it working. Make sure you get CWM updated whenever you can if you haven't done so, this could lead to problems down the road to flash different zips.
Click to expand...
Click to collapse
I'll do that next time I get a chance, I thought my phone was gone there for sure. Thanks again.
namsu55 said:
I'll do that next time I get a chance, I thought my phone was gone there for sure. Thanks again.
Click to expand...
Click to collapse
The Nexus S is a difficult phone to brick, luckily. Most of the rooting, bootloader unlocking and flashing steps are easy to follow too.
No problem!
namsu55 said:
This may sound weird but I held the USB in the phone port in an angle, luckily the removable drive came up.
Click to expand...
Click to collapse
Sounds like you have a bad connector on your phone.
obsanity said:
Sounds like you have a bad connector on your phone.
Click to expand...
Click to collapse
Yeah I think so.
Hi! I'm having a lot of troubles with my infuse. I connect the usb cable on my phone and make click USB Storage but my PC doesn't bring me the mass storage. I'm also having problems with heimdall and Odin, I cant pass through FACTORYFS, always give an error "factoryfs upload failed" but I could flash and I'm on Port_JW6_SAUROM. I also try with my captivate and the USB mass storage and Odin or Heimdall are working fine but I'm still having the 2 problems on my i997. Any idea of how can i solve this?
Have you tried uninstalling the USB drivers, and then reinstalling them? Here's a download link for them: http://d-h.st/sKF
At one time, I also had problems where Heimdall would fail after a certain point. Ended up being a simple driver issue. I'd try redoing the drivers, and maybe switching USB ports.
ApexPredatorBoids said:
Have you tried uninstalling the USB drivers, and then reinstalling them? Here's a download link for them: http://d-h.st/sKF
At one time, I also had problems where Heimdall would fail after a certain point. Ended up being a simple driver issue. I'd try redoing the drivers, and maybe switching USB ports.
Click to expand...
Click to collapse
I already did that! but nothing, I also reinstall windows.
langley88 said:
I already did that! but nothing, I also reinstall windows.
Click to expand...
Click to collapse
I've got the same issue. The phone will charge, but thats it.
Try a different computer, USB cable, USB port, drivers, uninstall Kies and just install the drivers.
If none of that works, it may be the USB port on the phone.
alarmguy48195 said:
I've got the same issue. The phone will charge, but thats it.
Try a different computer, USB cable, USB port, drivers, uninstall Kies and just install the drivers.
If none of that works, it may be the USB port on the phone.
Click to expand...
Click to collapse
Just as he said.. l.try different USB cables and different USB ports...if none work then its your phone
Sent from my SGH-I997 using Tapatalk 2
alarmguy48195 said:
I've got the same issue. The phone will charge, but thats it.
Try a different computer, USB cable, USB port, drivers, uninstall Kies and just install the drivers.
If none of that works, it may be the USB port on the phone.
Click to expand...
Click to collapse
OK! I did that and heimdall and odin are working fine but still having trouble with usb storage.
langley88 said:
OK! I did that and heimdall and odin are working fine but still having trouble with usb storage.
Click to expand...
Click to collapse
I can tell you that version 1.4.1 works, I am currently using it.
http://forum.xda-developers.com/showpost.php?p=20251953&postcount=1
Pony Express said:
I can tell you that version 1.4.1 works, I am currently using it.
http://forum.xda-developers.com/showpost.php?p=20251953&postcount=1
Click to expand...
Click to collapse
+1
Everything is working fine heimdall and odin are perfect. I can flash with no problem now but windows doesn't mount none of my internal or external SD cards but I can access through the phone without problem. The estrange thing is every communications with the phone are apparently working except windows cannot mount my sd's. I'm going to try lunix. Any advice?
langley88 said:
Everything is working fine heimdall and odin are perfect. I can flash with no problem now but windows doesn't mount none of my internal or external SD cards but I can access through the phone without problem. The estrange thing is every communications with the phone are apparently working except windows cannot mount my sd's. I'm going to try lunix. Any advice?
Click to expand...
Click to collapse
Use the link I provided in post 7 to mount usb. Also linux will work great ( I use Zorin)
Linux advantage- will show internal and external sd.
I have a dual-boot setup on my PC. Windows 7 and Ubuntu 12.04. I actually prefer to boot into my linux drive when I'm going to use Heimdall. Heimdall is already a pretty simple thing to work with, but when done outside of Windows, it seems even a bit more smooth. With Ubuntu, I never have the little Windows USB "quirks" that sometimes show up.
ApexPredatorBoids said:
I have a dual-boot setup on my PC. Windows 7 and Ubuntu 12.04. I actually prefer to boot into my linux drive when I'm going to use Heimdall. Heimdall is already a pretty simple thing to work with, but when done outside of Windows, it seems even a bit more smooth. With Ubuntu, I never have the little Windows USB "quirks" that sometimes show up.
Click to expand...
Click to collapse
I can access to my sd card but only when it's empty. I can copy file but then i cannot access or the transfers are slow. Any idea why?
EDIT: I'm having Error 0x8007045D: I/O Device error
Is that when using Linux? I'm just a casual tinkerer. I think you need one of the real gurus around here to figure this one out. Google search results for your error code seem to all be centered around problems with Windows and external hard drives. I did find this thread in HP support, maybe it somehow applies to you?
http://h30434.www3.hp.com/t5/Deskto...dows-7-USB-Mass-Storage-Lockup-FIX/m-p/163410
I'm just as lost as you are, on this one.
langley88 said:
OK! I did that and heimdall and odin are working fine but still having trouble with usb storage.
Click to expand...
Click to collapse
did u try connecting our phone in mass storage mode?
babamanan said:
did u try connecting our phone in mass storage mode?
Click to expand...
Click to collapse
ok, the problem isn't with heimdall or odin, those are fine, the problem is because I can't copy files to my internal or external sd (F, GB, ICS or JB). I try windows and Linux but i can access to the usb only when the internal sd is empty but no transfers of files.
the unique problem now is the transfer of files.I now it sounds like is the cable but i can transfer files on a captivate. HELP!!
I have accidentally formatted my entire LG G2(VS980) in CWM. and now I am stuck at the main LG screen with nowhere to go because their is no ROM installed. I cant use adb sideload either because I cant confirm the handshake and ive tried to use OTG in CWM but nothing pops up. I have wasted money on an over the night delivery because someone guaranteed me it would work so now I am out money....please I really need help...I am so screwed...:crying:
MoE MuRk said:
I have accidentally formatted my entire LG G2(VS980) in CWM. and now I am stuck at the main LG screen with nowhere to go because their is no ROM installed. I cant use adb sideload either because I cant confirm the handshake and ive tried to use OTG in CWM but nothing pops up. I have wasted money on an over the night delivery because someone guaranteed me it would work so now I am out money....please I really need help...I am so screwed...:crying:
Click to expand...
Click to collapse
FIRST: calm down please
Which version of CWM is installed? You can mount USB storage in the recovery and simply copy a rom to your sdcrad as it will be handled as usb mass storage. In case you can't mount storage --> we'll get it working another way
WHY you use adb to copy files? Mass storage is even more easy + safe
LS.xD said:
FIRST: calm down please
Which version of CWM is installed? You can mount USB storage in the recovery and simply copy a rom to your sdcrad as it will be handled as usb mass storage. In case you can't mount storage --> we'll get it working another way
WHY you use adb to copy files? Mass storage is even more easy + safe
Click to expand...
Click to collapse
v6.0.4.4 is the version of CWM I have
MoE MuRk said:
v6.0.4.4 is the version of CWM I have
Click to expand...
Click to collapse
You can mount USB storage in the recovery and simply copy a rom to your sdcrad as it will be handled as usb mass storage.
Can you do like this?
LS.xD said:
You can mount USB storage in the recovery and simply copy a rom to your sdcrad as it will be handled as usb mass storage.
Can you do like this?
Click to expand...
Click to collapse
when I try to mount USB it doesn't do anything at all. I tap on it and it does nothing at all
MoE MuRk said:
when I try to mount USB it doesn't do anything at all. I tap on it and it does nothing at all
Click to expand...
Click to collapse
Device must connected to pc... If it does not mount try restarting the recovery and do again. Close all adb instances on your computer.
LS.xD said:
Device must connected to pc... If it does not mount try restarting the recovery and do again. Close all adb instances on your computer.
Click to expand...
Click to collapse
ok i didn't close ADB ill try that in device manager it doesn't recognize my phone..do you know the commands to shut down all ADB stuff?
MoE MuRk said:
ok i didn't close ADB ill try that in device manager it doesn't recognize my phone..do you know the commands to shut down all ADB stuff?
Click to expand...
Click to collapse
Str-Alt-Del --> Close ADB.exe
also use a different USB port!
And have you installed latest USB drivers for your device?
FIXED!!!
Fixed thanks to LS.xD.....GENIUS!!!!!
Redmi note 7 pro
Everything was perfectly fine until today when I booted into twrp to flash a new rom and forgot to copy the rom.zip.
So from twrp itself I connected the usb cable to my Win10 PC, it detected my phone but in My computer/ Windows Explorer, phone wasn't showing up to copy the data from my pc.
I tried different usb ports but same issue.
I booted into phone os and then tried and then it showed into windows explorer.
Its only that from twrp it isn't showing in explorer where earlier it used to show to copy files.
What could be the reason? How to solve this.
after you get into the TWRP you need to navigate to Mount options and then turn on MTP there.
nri_tech1183 said:
Redmi note 7 pro
Everything was perfectly fine until today when I booted into twrp to flash a new rom and forgot to copy the rom.zip.
So from twrp itself I connected the usb cable to my Win10 PC, it detected my phone but in My computer/ Windows Explorer, phone wasn't showing up to copy the data from my pc.
I tried different usb ports but same issue.
I booted into phone os and then tried and then it showed into windows explorer.
Its only that from twrp it isn't showing in explorer where earlier it used to show to copy files.
What could be the reason? How to solve this.
Click to expand...
Click to collapse
Once u boot into recover go to Mount options and then turn on MTP there. if this also dont work check ur driver installed in pc or not also try formatting data at worst case.
sourav24071999 said:
Once u boot into recover go to Mount options and then turn on MTP there. if this also dont work check ur driver installed in pc or not also try formatting data at worst case.
Click to expand...
Click to collapse
Thanks man the mtp settings worked.