[Q] Governor/Clock speed suggestions for Shaks Zapblaster - Galaxy Tab 2 Q&A, Help & Troubleshooting

Hey all. I'm just looking for some general comments related to the various governors and clock speeds you all use while running Shakatus' Zapblaster on my GT-P5113. Been looking for a good mix of performance and battery life (if such a thing exists) although I kinda lean more towards performance. Any thoughts???

try this
CSP III said:
Hey all. I'm just looking for some general comments related to the various governors and clock speeds you all use while running Shakatus' Zapblaster on my GT-P5113. Been looking for a good mix of performance and battery life (if such a thing exists) although I kinda lean more towards performance. Any thoughts???
Click to expand...
Click to collapse
Bump um the max processor speed a little and use the on demand govenor. This is my favorite setup.:good:

Related

[Q] How can I improve this?

Hey XDA,
Here is my quadrant results after recently flashing the Jelly Bean Hydro 7 ROM by seanzscreams:
http://i.imgur.com/woI3vdD.jpg
Also, I did install a few games, which might affect the result. However, are our devices really this lacking in comparison to the HTC One X, or am I just doing something wrong here? The kernal that is currently running is maxed at 1300 Mhz, and I also "supercharged" the device using V6 Supercharger by zepplinrox (I used the 1000HP setting). I'm aware that I can overclock my device a bit higher by flashing a new kernal, but will 300-400 Mhz really make a difference of 1000+ in Quadrant? I'm a heavy gamer, ranging from emulators to heavy games like Modern Combat and Dead Trigger, so performance is very important to me. Also, this benchmark was taken using "Performance Mode."
Basically what I'm asking here is this: What are you guys' Quadrant results, and if they are insanely higher than mine, what do you use to achieve it?
Thanks for the help in advance
Vonologic said:
Hey XDA,
Here is my quadrant results after recently flashing the Jelly Bean Hydro 7 ROM by seanzscreams:
http://i.imgur.com/woI3vdD.jpg
Also, I did install a few games, which might affect the result. However, are our devices really this lacking in comparison to the HTC One X, or am I just doing something wrong here? The kernal that is currently running is maxed at 1300 Mhz, and I also "supercharged" the device using V6 Supercharger by zepplinrox (I used the 1000HP setting). I'm aware that I can overclock my device a bit higher by flashing a new kernal, but will 300-400 Mhz really make a difference of 1000+ in Quadrant? I'm a heavy gamer, ranging from emulators to heavy games like Modern Combat and Dead Trigger, so performance is very important to me. Also, this benchmark was taken using "Performance Mode."
Basically what I'm asking here is this: What are you guys' Quadrant results, and if they are insanely higher than mine, what do you use to achieve it?
Thanks for the help in advance
Click to expand...
Click to collapse
Attached are my results. Mine are insanely better than the HTC One X. Currently i'm on Hydro 6.1 (havent had the time to upgrade), running Clemsyns 1.8ghz OC kernel and I am in Performance Mode while running the test. I have no issues running any games, according to the benchmark I am doing 58-62fps. You should do what I've done if you're looking for good performance.
lightitwithfire said:
Attached are my results. Mine are insanely better than the HTC One X. Currently i'm on Hydro 6.1 (havent had the time to upgrade), running Clemsyns 1.8ghz OC kernel and I am in Performance Mode while running the test. I have no issues running any games, according to the benchmark I am doing 58-62fps. You should do what I've done if you're looking for good performance.
Click to expand...
Click to collapse
Thanks a lot for the response, much appreciated.
EDIT: What governer do you use btw and your setcpu min/max?
Vonologic said:
Thanks a lot for the response, much appreciated.
EDIT: What governer do you use btw and your setcpu min/max?
Click to expand...
Click to collapse
I use pegasus and sio for best performance on unter's kernel.
jgaf said:
I use pegasus and sio for best performance on unter's kernel.
Click to expand...
Click to collapse
Pegasus, as in PegasusQ? Isn't that samsung exclusive?
Vonologic said:
Thanks a lot for the response, much appreciated.
EDIT: What governer do you use btw and your setcpu min/max?
Click to expand...
Click to collapse
Setcpu interactive min=760mhz max=1.8ghz
here's mine with clean ROM running tf700 kernel.
Sent from my ASUS Transformer Pad TF300T using Tapatalk 2
Here with hydro 7 unter's kernel pegasusq sio
Sent from my ASUS Transformer Pad TF300T using Tapatalk HD

[A700] Best performance

Hello guys!
Im addicted in playing heroes of order and chaos by gameloft. I got acer a700 for playing. Since i have got avg fps around 25-30, im looking for better performance.
What is best combo kernel+rom+ software for best gaming?
My tablet is running on stock 4.1.2 with custom kernel and im not satisficated with performance.
Guys plz help
Does advanced settings>power mode>high power, help any?
What framerates were you getting with stock?
Doesnt matter. I get on loeest setting in game around 25 fps in stress. Im pissed off since my galaxy note gets same framerate. Help me. Frame didnt changed with new oc kernel
tejp said:
Hello guys!
Im addicted in playing heroes of order and chaos by gameloft. I got acer a700 for playing. Since i have got avg fps around 25-30, im looking for better performance.
What is best combo kernel+rom+ software for best gaming?
My tablet is running on stock 4.1.2 with custom kernel and im not satisficated with performance.
Guys plz help
Click to expand...
Click to collapse
How is your internet connection? This can drastically affect the games speed & smoothness. Try standing/sitting right at the router for a bit. See what happens. If that helps see if a wireless extender is in the offing. I got one for $15 shipped on eBay.
How fast is your internet? Cable can be a drag in a crowded neighborhood.
Also, if you have root, try uninstalling the Acer bloatware w/ Root App Delete or similar. Most of the Acer apps are duplicates of the Android ones anyways. Disable the Acer Ring too.
oc kernal for 10.1.2+, ?
Somewhere I read that JB/cm10.1.+ on the a700 has some extra hardware layers,
I think that slows ya down.
I wonder what the fps would of be on ICS
jamart3d said:
oc kernal for 10.1.2+, ?
Somewhere I read that JB/cm10.1.+ on the a700 has some extra hardware layers,
I think that slows ya down.
I wonder what the fps would of be on ICS
Click to expand...
Click to collapse
What do u mean with this kernel?
Would it be possible that someone will type how to install stock kernel?
Since kernel is only for stock roms im not able to install custom rom with it.
And btw Am I wrong becouse of feeling that this tablet is not so good for gaming?
Also i would like u to ask if the nexus 10 would be better for gaming?
I would be gr8full for fast replay.
Looking forward for answers
How is your internet connection? This can drastically affect the games speed & smoothness. Try standing/sitting right at the router for a bit. See what happens. If that helps see if a wireless extender is in the offing. I got one for $15 shipped on eBay.
How fast is your internet? Cable can be a drag in a crowded neighborhood.
Also, if you have root, try uninstalling the Acer bloatware w/ Root App Delete or similar. Most of the Acer apps are duplicates of the Android ones anyways. Disable the Acer Ring too.
Click to expand...
Click to collapse
Nah . It is not the Internet fault. i have tested game on many net connections
Kiteman kernel v4.1 works with cm10.1.2 stable
A700 is not praised for its gpu , and slightly funky screen size.
I got one to only mess with cm10.1
The nexus 10 should be better with extra mem and better gpu.
My antutu gpu score is 1878
jamart3d said:
Kiteman kernel v4.1 works with cm10.1.2 stable
A700 is not praised for its gpu , and slightly funky screen size.
I got one to only mess with cm10.1
The nexus 10 should be better with extra mem and better gpu.
My antutu gpu score is 1878
Click to expand...
Click to collapse
Ok so now i just need to install cm in the same way as they type in its guide and everything will work?
Can't say everything will work,
just saying there is a custom kernel available for cm10.1
Need to load it after loading rom.
I'm not sure it will help your fps issue much
What is your antutu gpu score?

Overclocking/undervolting the TF700 gpu

Dear XDA people,
Im currently working with Max's V4 RC2 kernel in combination with Cromi-X 4.6.9 (still need to update to the latest), which gives me a pretty smooth working tablet.
Now, im running the cpu at 1900mhz, 1225mV (still testing if i can go lower), and I can adjust speed and voltage nicely with Trickster Mod.
But, I would wan't to crank up the gpu speed (which is currently 666mhz I think?) and have the same "options/settings" available to do so. For example, a rom limitation of 750/800mhz on the gpu, with a variation of voltages to choose from. This way I can get as much gpu power as possible, since i find gaming on the tf700 pretty disappointing in terms of performance (of course a lot of games are not optimized for tegra).
Do you guys know what would be the best possible solution to overclock/adjust the gpu speed+voltage?
Thanks!
Sent from my GT-I9505 using xda app-developers app
tijsva said:
Dear XDA people,
Im currently working with Max's V4 RC2 kernel in combination with Cromi-X 4.6.9 (still need to update to the latest), which gives me a pretty smooth working tablet.
Now, im running the cpu at 1900mhz, 1225mV (still testing if i can go lower), and I can adjust speed and voltage nicely with Trickster Mod.
But, I would wan't to crank up the gpu speed (which is currently 666mhz I think?) and have the same "options/settings" available to do so. For example, a rom limitation of 750/800mhz on the gpu, with a variation of voltages to choose from. This way I can get as much gpu power as possible, since i find gaming on the tf700 pretty disappointing in terms of performance (of course a lot of games are not optimized for tegra).
Do you guys know what would be the best possible solution to overclock/adjust the gpu speed+voltage?
Thanks!
Sent from my GT-I9505 using xda app-developers app
Click to expand...
Click to collapse
I think 666mhz GPU setting is probably reserved for Satans minions. At the moment the only way to control GPU speed is by adjusting the voltage. This is easiest using hunds kernel (3.1 if you have problems with 3.2) and his app. Together, you can crank the GPU all the way up to 775MHz and fry some eggs on the back of your TF700 and waiting for it to go into nuclear meltdown.
I know the gpu runs hot, thats why I want to see what speeds can be achieved with limited voltage. So you‘re saying the only way to change gpu speed is by setting a higher voltage for it? Why is that exactly?
Sent from my ASUS Transformer Pad TF700T using xda app-developers app
You've posted this in the wrong forum, so it will be deleted, in the mean time there is really no reason to use 1900mhz even less so while gaming. 1700mhz at max (it can go higher but you wont see much change/ if at all in benchmarks/ games but u'll see the difference in battery life)
As for gpu i run 750 mhz but again the difference between 650 - 750 mhz is hardly noticeable, gaming performance isn't great on the tf700, the tf300t doesn't look as good but its noticeably smoother with 3d
Moral of the story the tegra 3 gpu isn't powerful enough for 1920x1200 the tegra 4 wont be much better, the tegra 5 is the interesting one
tijsva said:
So you‘re saying the only way to change gpu speed is by setting a higher voltage for it?
Click to expand...
Click to collapse
Yes, that's what I'm saying. Unless you want to learn to create kernels and do all the magical voodoo these wizards do to bring us OC kernels!
tijsva said:
Why is that exactly?
Click to expand...
Click to collapse
I have no idea, been wondering that myself. I even posted the question somewhere about a week ago, but no one enlightened me. I really reccomend using hunds kernel and app though. There is a "gaming" option in his app that works very well, good speed without the ominous red glow of molten metal on your TF700's back panel.
TitanUranus said:
Yes, that's what I'm saying. Unless you want to learn to create kernels and do all the magical voodoo these wizards do to bring us OC kernels!
I have no idea, been wondering that myself. I even posted the question somewhere about a week ago, but no one enlightened me. I really recommend using hunds kernel and app though. There is a "gaming" option in his app that works very well, good speed without the ominous red glow of molten metal on your TF700's back panel.
Click to expand...
Click to collapse
Are you saying increasing gpu voltage will subsequently increase gpu frequency? (i have no idea how it works, ive never bothered to look into it but now im interested) _that or Hunds will know but im guessing if thats the case freq and voltage must be linked in a voltage table but i would have thought freq could be changed independently to voltage
JoinTheRealms said:
You've posted this in the wrong forum, so it will be deleted, in the mean time there is really no reason to use 1900mhz even less so while gaming. 1700mhz at max (it can go higher but you wont see much change/ if at all in benchmarks/ games but u'll see the difference in battery life)
As for gpu i run 750 mhz but again the difference between 650 - 750 mhz is hardly noticeable, gaming performance isn't great on the tf700, the tf300t doesn't look as good but its noticeably smoother with 3d
Moral of the story the tegra 3 gpu isn't powerful enough for 1920x1200 the tegra 4 wont be much better, the tegra 5 is the interesting one
Click to expand...
Click to collapse
I know the tf700 isnt much of a gaming tablet unfortunately, but then again, why not setting it up so that it runs games as smooth as the hardware will allow ? Every small improvement is an improvement if you ask me.
For 750mhz gpu, what kernel are you using?
Sent from my ASUS Transformer Pad TF700T using xda app-developers app
I'm using hundsbuahs latest kernel, the problem with tegra CPUs is thermal throttling, it starts around 72c on a lot of devices (not sure about the tf700) at 1900 you could find worse gaming performance than a lower cpu / GPU clock speed. Its completely up to you, hundsbuahs kernels give users a lot of flexibility as they can push the devices to the limit, I like _that's kernels personally they suited to my usage (what ever that means)

Nexus 5 - how to take the best performance?!

Hello everyone.
I hope there aren't a similar post here.
I wood like to make a "monster" Nexus 5, concerning performance.
So, can somebody tell me about the fastest ROM, the best version of the rom, the best compatible kernel, etc.
I want to see the highest benchmark, and of course the best performance.
I don't care about the version of the ROM (KitKat, Lollipop, etc)
I'm waiting for responses.
Thank you!
Get Marshmallow (Stock or the Xtreme ROM)
Get Elemental X kernel
Switch to F2FS filesystem in recovery (make backups as this wipes)
Overclock
Profit.
For reference:
3D Mark IS Unlimited score: 18672 (stock was in the 15k)
Geekbench (single core): 1040 (stock 800s)
Geekbench (multicore): 2987
AnTuTu: 42k
This is running at 2.8Ghz.
EDIT: I can benchmark all the way up to 2.9Ghz but it becomes unstable in day-to-day use at that point. So keeping it at 2.7 - 2.8Ghz for stability.
vkarof said:
Hello everyone.
I hope there aren't a similar post here.
I wood like to make a "monster" Nexus 5, concerning performance.
So, can somebody tell me about the fastest ROM, the best version of the rom, the best compatible kernel, etc.
I want to see the highest benchmark, and of course the best performance.
I don't care about the version of the ROM (KitKat, Lollipop, etc)
I'm waiting for responses.
Thank you!
Click to expand...
Click to collapse
Get Racer Kernel
Any Rom will do as long as it is not a DeoDexed Rom
get performance cpu governor, OC to 2.9 GhZ
make I/O scheduler either Sio or Vtripndroid
make read ahead 3072kb
Set cpu governor tunable of up_threshold to 10
Watch your phone have the greatest benchmark scores.. While getting hotter than sexy girls while screen On haha

What is the fastest rom/kernel for the S6?

Is the Note 5 rom for the S6 the fastest one? And what kernel would make the S6 have the best ram management etc?
Maybe if you guys have some benchmarks to compare, it would help
Doctorhitch said:
Is the Note 5 rom for the S6 the fastest one? And what kernel would make the S6 have the best ram management etc?
Maybe if you guys have some benchmarks to compare, it would help
Click to expand...
Click to collapse
XtreStoLite and Arter Kernel is my combination and it works flawlessy. I capped it at 1500/1500 MHz for insane performance and are still having great battery.
You can also take a look at Xileforce's work over at his thread. http://forum.xda-developers.com/galaxy-s6/samsung-galaxy-s-6--s-6-edge-unified-development/kernel-vindicator-t3156281/post63443095#post63443095 Good life and performance so far and he is very active on the kernel with updates and new additions.
MAKO 4.2 and Arters 7.2 kernel work flawlessly for me
I've tried the back-to-n0t3 for and the Arter kernel and it gave me around 70k on the antutu benchmark. Anyone got more?

Categories

Resources