Related
please neeeeed pit file n8000 original pit file to flash phone
THE RULES
Please only post ROM Development, Hacks, Mods, Fixes and Tutorials in the development section, all questions go in Q&A. This prevents the development section getting clogged up by irrelevant posts.
Try sammobile .com for PIT .
jje
all firmwares on sammobile dose not have pit
all firmwares on sammobile dose not have pit for n8000 i download all firmwares
dvdaio said:
all firmwares on sammobile dose not have pit for n8000 i download all firmwares
Click to expand...
Click to collapse
Try here. Not 100% sure about it though.
boss here but there is not pit file all are 1 tar file only
I think ur odin failed while installing modem. Try to flash cwm via odin. Worked for me if it's the problem
no no fail with me
i neeed to reparttion my device so how can we fix it i need pit file for this modle
Mate, no one seems to have it. We can't give what we don't have....
You could try a general Google search .
jje
You brick a lot of devices...
Sent from my ADR6425LVW using Tapatalk 2
dvdaio said:
please neeeeed pit file n8000 original pit file to flash phone
Click to expand...
Click to collapse
I have found pit file for N8000 in a russian site.
Reading this file in hexeditor i have found also where is pit file in N8000 (dev\block and address; probably the same address for 8010, 8020...)
I have made a bat file for saving from pc this file from your N8000 in sdcard
You can found all in my post here http://www.androidiani.com/forum/modding-samsung-galaxy-note-10-1/296023-n8000-pit-file.html
You want to post the .pit file here instead of a link to an Italian(?) site?
I can't read that language and don't want to have to join another foreign site to get something considering I already get spammed by a few other sites in french, russian and ?....
ultramag69 said:
You want to post the .pit file here instead of a link to an Italian(?) site?
I can't read that language and don't want to have to join another foreign site to get something considering I already get spammed by a few other sites in french, russian and ?....
Click to expand...
Click to collapse
Ok (and sorry) i have made a new thread http://forum.xda-developers.com/showthread.php?p=41158546#post41158546 for best visibility on this issue.
I hope I have done well
No worries mate, I probably came off a bit waspish as I just finished work with only a few hours sleep between shifts....
Thanks for reposting the .pit file as there are a few guys on here that probably need it.... :good:
I'm going to test the pit and files, cause I've got some /efs problem. I'm going to downgrade and try to get back in life my n8000. I'll post some feedback after my try today. Thanks!
Hey everyone,
I need someone to pull up and post a .pit file for the Samsung Galaxy Note 10.1 GT-N8013 because I can't use OTG host, and the unit no longer charges on USB. This happened after the incorrect ROM was loaded on the device, which I thought was the correct ROM oops.
Thanks for any help
Might be found on sammobile.com .
jje
JJEgan said:
Might be found on sammobile.com .
jje
Click to expand...
Click to collapse
Hey,
I looked there and didn't find it. Also, maybe I don't need a pit file. The main issue is at when my system is restored USB does not work and the system will not charge through USB. This happened using teamwin recovery and installing the incorrect rom, AOKP P4wifi instead of P4notewifi as I had forgotten the correct name for the device. The next step is that I had to do a mke2fs on /efs to make /efs mount which is why I thought I needed a pit file to repartition the entire device and restore the software.
Any help at all to make the device work properly again would rock. I'll post a solution here and to my company knowledge base once a fix is found.
Thanks everyone
Hello,
I guess I need the 4.0.4 stock rom or something from samsung that I can write to the device that will blow away all customizations and return it to as if I pulled it out of the box originally. Something is REALLY FRELLED UP.
HELP ME I'M A MORN!!!! apparently...
pit file download
Droiddevelopers a com site has the pit file. Hope this helps
marcusah123 said:
Hello,
I guess I need the 4.0.4 stock rom or something from samsung that I can write to the device that will blow away all customizations and return it to as if I pulled it out of the box originally. Something is REALLY FRELLED UP.
HELP ME I'M A MORN!!!! apparently...
Click to expand...
Click to collapse
You can find the latest stock 4.0.4 here, you must register to download.
http://www.sammobile.com/firmware/?page=3&model=GT-N8013&pcode=0&os=1&type=3#firmware
stevessvt said:
You can find the latest stock 4.0.4 here, you must register to download.
http://www.sammobile.com/firmware/?page=3&model=GT-N8013&pcode=0&os=1&type=3#firmware
Click to expand...
Click to collapse
I dont find any downloads on that site for the usa n8013 ueclk8 wifi only. There is only a download for cellular south products and thats a cell phone company in my area.
Ive used it on my 10.1, no problems.
Hey
I didn't find a pit file on that website for my device no links.
Ideas?
Hack pit file..
marcusah123 said:
Hey
I didn't find a pit file on that website for my device no links.
Ideas?
Click to expand...
Click to collapse
I have the same problem.. Can we use the pit file of gt-8010?? WHo can hack it?
conan1600 said:
I dont find any downloads on that site for the usa n8013 ueclk8 wifi only. There is only a download for cellular south products and thats a cell phone company in my area.
Click to expand...
Click to collapse
The Cellular South file IS the 8013. I have no idea why it is labeled as that, but I have used both 4.0.4 & 4.1.2 from Sammobile for my 8013. Trust me, both work.
losguy said:
Droiddevelopers a com site has the pit file. Hope this helps
Click to expand...
Click to collapse
So are you going to provide a link to a file or even a valid website? Otherwise, no, this doesn't help, even a little.
Hello, here a plea for help.
I tried to flash my stock N8000 via this post: https://forum.xda-developers.com/showthread.php?t=1957002
I did try this several times, but it never completed: see the attached screen shot of what happens.
Now the device no longer boots normally. It begins to boot, then hangs on the Samsung logo.
Can someone help me here, as the original post seems dead....
thanks.
Start by flashing stock rom through Odin .
JJEgan said:
Start by flashing stock rom through Odin .
Click to expand...
Click to collapse
Hello, and thanks for responding. Could you give me a hint/howto on where the standard ROM might be, and how to flash, or where to read up on that?
Sorry, a bit of a noob on this...
thanks.
Firmware Updato.com or sammobile.com
howto use odin
http://updato.com/how-to/how-to-install-an-official-samsung-stock-firmware-using-odin
JJEgan said:
Firmware Updato.com or sammobile.com
howto use odin
http://updato.com/how-to/how-to-install-an-official-samsung-stock-firmware-using-odin
Click to expand...
Click to collapse
Thanks. Am driving right now. I'll try this later this evening.
Sent from my SM-N920C using Tapatalk
JJEgan said:
Firmware Updato.com or sammobile.com
Hello, as the device no longer boots its difficult to tell exactly which device it is, as there are at least 4 devices that seem to fit my device description. I've got the N8000, from GErmany, i received it as part of a package from E-plus. From that information there are 4 device ROM's available....one as late as 2015. Which should i take?
thanks again.
Click to expand...
Click to collapse
Hello,
I do need some help now. I believe i've followed all directions, but am not having success.
Again, my device is a Samsung N8000 Note 10.1. Purchased from Eplus Germany
I have read the directions in how to use Odin, and have followed them precisely.
Drivers installed.
Original Firmware downloaded (N8000XXUDNL1_N8000EPLDNL2_N8000XXUDNH1_Home.tar). But, in the compresesed file that I downloaded there was also another file (SS_DL.dll). Anyone know what this means?
I copied both files into the directory of Odin v3.12.13.
began Odin, then put the tablet into download mode, then connected it to my computer. There was a sound from my computer recognizing the tablet.
I then added the file firmware file (N8000XXUDNL1_N8000EPLDNL2_N8000XXUDNH1_Home.tar) into Odin under the AP tab. I checked that the re-partiton box was not checked, then klicked onto Start. But Odin failed after about 3 seconds.
Can anyone please help me here?
thanks.
Use tar file only .
<I copied both files into the directory of Odin v3.12.13.>Never heard of that before .
At a guess Odin cannot find the file or its not connected ID Box in odin shows as connected
Hello out there community...no one out there that can help me here? Please? ....
tjohnso1 said:
Hello,
I do need some help now. I believe i've followed all directions, but am not having success.
Again, my device is a Samsung N8000 Note 10.1. Purchased from Eplus Germany
I have read the directions in how to use Odin, and have followed them precisely.
Drivers installed.
Original Firmware downloaded (N8000XXUDNL1_N8000EPLDNL2_N8000XXUDNH1_Home.tar). But, in the compresesed file that I downloaded there was also another file (SS_DL.dll). Anyone know what this means?
I copied both files into the directory of Odin v3.12.13.
began Odin, then put the tablet into download mode, then connected it to my computer. There was a sound from my computer recognizing the tablet.
I then added the file firmware file (N8000XXUDNL1_N8000EPLDNL2_N8000XXUDNH1_Home.tar) into Odin under the AP tab. I checked that the re-partiton box was not checked, then klicked onto Start. But Odin failed after about 3 seconds.
Can anyone please help me here?
thanks.
Click to expand...
Click to collapse
JJEgan said:
Use tar file only .
<I copied both files into the directory of Odin v3.12.13.>Never heard of that before .
At a guess Odin cannot find the file or its not connected ID Box in odin shows as connected
Click to expand...
Click to collapse
Thanks for this. I will try this when i'm home this evening...hope it works. Thanks!
tjohnso1 said:
Thanks for this. I will try this when i'm home this evening...hope it works. Thanks!
Click to expand...
Click to collapse
Hello, sorry but i need some more help here please.
I've downloaded what i believe is the stock firmware for my device from updato.com: GT-N8000_EPL_1_20150303173500_n47626s3xd
This is a zipped package with two file in it:
N8000XXUDNL1_N8000EPLDNL2_N8000XXUDNH1_Home.tar.md5
and
SS_DL.dll
I've put both of these files into the directory where ODIN is. I have downloaded and tried serveral ODIN versions: v1.85, v3.10.6, v3.12.7, v3.12.3, v3.07
None of them work. After loading the tar file, ODIN begins, then after about 3 seconds stops and show the message "fail".
Attached is a screen shot of ODIN once i've loaded the tar file, and one that shows after the fail.
I've also added a picture of my note 10.1 N8000 while in download mode.
Anyone can help me here?
thanks.
Download file .
Unzip file .
Put file on desktop .
Open Odin
Locate tar file only and add to PDA or AP
firmware that you are trying to install is a downgrade and the secure bootloader (sboot) is blocking it.
JJEgan said:
Download file .
Unzip file .
Put file on desktop .
Open Odin
Locate tar file only and add to PDA or AP
firmware that you are trying to install is a downgrade and the secure bootloader (sboot) is blocking it.
Click to expand...
Click to collapse
Hello, and thanks.
What you have described above is exactly what i am doing. Are you saying that the reason it does not work is because the bootloader is blocking it? If so, how do i get around this?
I would really like to "upgrade", rather than downgrade. But at the moment i cannot find any other firmwares for my device. A few years ago I saw several ones, but not anymore.
Do you have a suggestion of which firmware I should install, and where i can get this?
Again, thanks so much for your help! I really appreciate it.
Looking at sammobile and updato last firmware is .
N8000XXSDQA7 android 4.4.2 .( the last version for note is 4.4.2 )
But they don't list bootloader versions .
JJEgan said:
Looking at sammobile and updato last firmware is .
N8000XXSDQA7 android 4.4.2 .( the last version for note is 4.4.2 )
But they don't list bootloader versions .
Click to expand...
Click to collapse
Hello, i'm not sure what this means. Which version should i use? and how?
That one flashed through Odin and hopefully its a later bootloader
JJEgan said:
That one flashed through Odin and hopefully its a later bootloader
Click to expand...
Click to collapse
Hello,
i tried to flash N8000XXSDQA7, but it also failed. Similar to all the others that i've tried to flash. I must be doing something fundamentally wrong, as the fail happeds after only about 3 seconds.
Any help you can offer? Really appreciate it.
thanks
I think that the bootloader section of your Note is damaged.The picture you posted shows right method of Odin flash
JJEgan said:
I think that the bootloader section of your Note is damaged.The picture you posted shows right method of Odin flash
Click to expand...
Click to collapse
Ok, but what do i do if the bootloader is damaged? Can i fix it or flash it with another bootloader?
thanks.
Yes if you can get another bootloader .
Further steps are beyond my knowledge but have a look here .
https://www.google.co.uk/search?q=x...x-b&gfe_rd=cr&dcr=0&ei=he5VWrvpOOqstgeTsYaICA
Hey guys i am very new to this and have done a lot of research and i'm in need of some help, I tried to put new firmware onto my Samsung S7 but it failed, long story short i can't get it to boot up normally now. I can put it into download mode and then the recovery mode.
In Download mode it says this
Product Name: SM-G930F
Current Binary: Samsung Official
System Status: Custom
FRP Lock: On
Secure Download: Enabled
Warranty Void: 0
In Recovery Mode it says
samsung/heroltexx/herolte
7.0/NRD90M/G930FXXU1DQJ1
No Support SINGLE - SKU
Supported API: 3
dm-Verity error ...
E: Failed to mount /system (Invalid Argument)
I have done this in the past and haven't had any issues with it, but no matter what i do i cant get it to boot up. I've tried the kies and smart switch to put the normal firmware back on but it says this device isn't supported and so it wont load it on. I have tried multiple firmwares from sammobile using AP,BL,CP and i did put in the CSC one also at some stage.
I hope this is enough information if i have missed anything please let me know, hopefully someone has some answers or suggestions. Thanks guys
Make sure you are using ODIN 3.12.3 or newer, older versions don't work properly
First off, Kies no longer supports Galaxy S7, actually never did.
What you can try, use odin (latest version 3.12.7 I think), download your firmware and include all 5 files in odin. You cannot ignore CSC file.
So in order, put BL, AP, CP and CSC and... pit file.
In order to have pit file, you need to make o copy of CSC file, change extension of that copy file to .zip, extract files and inside you will find pit file. Include it in odin in Pit card.
Then flash your phone and report back.
*Detection* said:
Make sure you are using ODIN 3.12.3 or newer, older versions don't work properly
Click to expand...
Click to collapse
Yeah i was using an older version but i downloaded the latest one and still no luck
Cholek3 said:
First off, Kies no longer supports Galaxy S7, actually never did.
What you can try, use odin (latest version 3.12.7 I think), download your firmware and include all 5 files in odin. You cannot ignore CSC file.
So in order, put BL, AP, CP and CSC and... pit file.
In order to have pit file, you need to make o copy of CSC file, change extension of that copy file to .zip, extract files and inside you will find pit file. Include it in odin in Pit card.
Then flash your phone and report back.
Click to expand...
Click to collapse
Have not tried this, will give it a shot and get back to you!
Cholek3 said:
First off, Kies no longer supports Galaxy S7, actually never did.
What you can try, use odin (latest version 3.12.7 I think), download your firmware and include all 5 files in odin. You cannot ignore CSC file.
So in order, put BL, AP, CP and CSC and... pit file.
In order to have pit file, you need to make o copy of CSC file, change extension of that copy file to .zip, extract files and inside you will find pit file. Include it in odin in Pit card.
Then flash your phone and report back.
Click to expand...
Click to collapse
No Luck, i tried what you said and this is what happens
https://imgur.com/a/QQGAn
Re-Partition was automatically ticked, should i try it again and have it un-ticked? or have i totally buggered it?
Try different cable and/or USB port and/or even computer.
Your phone is ok-ish. You only have to manage to flash software and should be up and running.
Cholek3 said:
Try different cable and/or USB port and/or even computer.
Your phone is ok-ish. You only have to manage to flash software and should be up and running.
Click to expand...
Click to collapse
Well im glad its alright haha, ill keep trying different things as you suggested! Hopefully i have some luck. Thank you
Okay bit of an update on what i have attempted - Still no luck at all,
Tried different Odin verisons
Tried multiple firmwares all downloaded from SamMobile & Correct country/carrier etc
The BL,CP and CSC all seem to work fine when i do them by themselves or seperately but i can never get AP to work, it always fails at Sys.img and doesn't go any further.. it always fails about 1/4 of the way through
Tried the PIT partition with and without re-partition clicked
Tried different cables and Ports
anyone have anymore suggestions or is it dead
Did you try using Smart Switch on pc and recover software that way?
Cholek3 said:
Did you try using Smart Switch on pc and recover software that way?
Click to expand...
Click to collapse
Yeah, it says device isn't supported.. when i click on emergency software recovery nothing shows up..
I have run out of options. Sorry.
Cholek3 said:
I have run out of options. Sorry.
Click to expand...
Click to collapse
No worries, ill keep trying and report back if i have any success
will91491 said:
Yeah i was using an older version but i downloaded the latest one and still no luck
Click to expand...
Click to collapse
Phone must be in Download Mode for ODIN
Make sure you have downloaded the correct firmware
It could be the internal memory fault. That's why it stops at 1/4 each time.
*Detection* said:
Phone must be in Download Mode for ODIN
Make sure you have downloaded the correct firmware
Click to expand...
Click to collapse
Yeah i know this much, have done it also
Cholek3 said:
It could be the internal memory fault. That's why it stops at 1/4 each time.
Click to expand...
Click to collapse
Might give it a shot at replacing it, its ****ed either way as far as i can see. I've worked on a lot of iPhone diodes/chips so hopefully i can do this one. Will report back in a few weeks
Tried a different PC?
*Detection* said:
Tried a different PC?
Click to expand...
Click to collapse
Thats what I suggested earlier on, but there seems to be loads of other threads recently, where people's phones fails at loading "system" in odin.
Hi guys,
I am having trouble recovering my galaxy s4. I have downloaded odin and stock firmware and followed the tutorial to reflash firmware but it always fails with the same message Deviceinfo fail. I have attached a ic of the screen. The phone originally had German firmware on it at level 5.0.1 lollipop. I can get the phone into the right state to flash and have tried several different BG firmwares
GT-I9505_1_20161201163515_lgwvgkwp4u
I9505XXUGNG8_I9505YXYGNH2_BTU
I always end up with the same error. It would be great if some guru could give me a hint on what I am doing wrong. BTW I am running windows 10 the Galaxy drivers I am using are 1.7.43.0 and Odin3 is V3.14.4.
Cheers Guys
Steve
Here is your solution:
Boot into download mode by pressing ( Volume Down + Power + Home button) and stop at the screen of continue and reboot.
Quickly boot back into download mode by pressing (Volume Down + Power + Home button)
Press continue.
XDHx86 said:
Here is your solution:
Boot into download mode by pressing ( Volume Down + Power + Home button) and stop at the screen of continue and reboot.
Quickly boot back into download mode by pressing (Volume Down + Power + Home button)
Press continue.
Click to expand...
Click to collapse
Thanks for response but that doesnt fix it . It just puts the phone into the firmware updae state
That's download mode....
If you're new to this stuff, please don't. Don't waste time and a good working phone for whatever youtube tutorial you saw.
XDHx86 said:
That's download mode....
If you're new to this stuff, please don't. Don't waste time and a good working phone for whatever youtube tutorial you saw.
Click to expand...
Click to collapse
I have flashed images before with no problem. This had German firmware on it and was trying to get a UK image on it. I followed the process posted here on this forum not a youtube tut. I would have thought tutorials on this forum should be good???
steve67474 said:
I have flashed images before with no problem. This had German firmware on it and was trying to get a UK image on it. I followed the process posted here on this forum not a youtube tut. I would have thought tutorials on this forum should be good???
Click to expand...
Click to collapse
Tutorials here are revised and trustworthy, what's not trustworthy is the user who's is flashing the phone. As I specifically said "If you're new to this" which means if anything goes awry, it's your fault and no one is responsible. Of course someone here would help you if that happens and you ask nicely.
Flashing UK variant might cause issues with the SIM services on the device, like issues with calls, messages, etc.
Flashing a different ROM doesn't necessarily mean you have a better device.
XDHx86 said:
Tutorials here are revised and trustworthy, what's not trustworthy is the user who's is flashing the phone. As I specifically said "If you're new to this" which means if anything goes awry, it's your fault and no one is responsible. Of course someone here would help you if that happens and you ask nicely.
Flashing UK variant might cause issues with the SIM services on the device, like issues with calls, messages, etc.
Flashing a different ROM doesn't necessarily mean you have a better device.
Click to expand...
Click to collapse
Thanks for the info and accept what you say. it maybe I have tried to flash the wrong image on the phone and got myself in this position as I didnt want the german image with its apps. We all have to learn somewhere and have had no issues other times but I am trying to recover from this now and XDA is where I am looking for support.
Cheers
steve67474 said:
Thanks for the info and accept what you say. it maybe I have tried to flash the wrong image on the phone and got myself in this position as I didnt want the german image with its apps. We all have to learn somewhere and have had no issues other times but I am trying to recover from this now and XDA is where I am looking for support.
Cheers
Click to expand...
Click to collapse
XDHx86 said:
Here is your solution:
Boot into download mode by pressing ( Volume Down + Power + Home button) and stop at the screen of continue and reboot.
Quickly boot back into download mode by pressing (Volume Down + Power + Home button)
Press continue.
Click to expand...
Click to collapse
I already gave you the solution, this should put your device in download mode and solve the problem with odin.
After following these steps, just flash ROM files.
XDHx86 said:
I already gave you the solution, this should put your device in download mode and solve the problem with odin.
After following these steps, just flash ROM files.
Click to expand...
Click to collapse
Odin fails to load the image it checks the cjhecksum ok but when you press start then it fails to load. See my first post I posted an image of the failure
Regards
Steve
steve67474 said:
Odin fails to load the image it checks the cjhecksum ok but when you press start then it fails to load. See my first post I posted an image of the failure
Regards
Steve
Click to expand...
Click to collapse
I think you may have to format the partitions and flash the ROM. Doing so will delete everything on your device.
XDHx86 said:
I think you may have to format the partitions and flash the ROM. Doing so will delete everything on your device.
Click to expand...
Click to collapse
Thanks will give that a go
Cheers
Steve
steve67474 said:
Thanks will give that a go
Cheers
Steve
Click to expand...
Click to collapse
Just in case you don't know how to:
Extract PIT file from CSC file.
Open Odin and put the PIT file in the PIT tab.
Check re-partition option in options tab.
Put BL, AP, CP and CSC files and flash.
To extract the PIT file from the CSC file:
Rename the CSC file extension from MD5 to ZIP then extract it in a folder.
Rename the CSC file extension back from ZIP to MD5.
Only put files from the UK variant or whatever ROM your going to flash.
XDHx86 said:
Just in case you don't know how to:
Extract PIT file from CSC file.
Open Odin and put the PIT file in the PIT tab.
Check re-partition option in options tab.
Put BL, AP, CP and CSC files and flash.
To extract the PIT file from the CSC file:
Rename the CSC file extension from MD5 to ZIP then extract it in a folder.
Rename the CSC file extension back from ZIP to MD5.
Click to expand...
Click to collapse
Cheers XDHx86 will give this a go
Hi XDHx86 I think I know what's going wrong here. All the images I have downloaded have 1 x.MD5. and 1 x.dll in them.
EG: I9505XXUHOJ2_I9505BTUHOJ1_I9505XXUHOJ2_HOME.tar.md5 and SS_DL.dll. Although some of the downloads say there should be 4 files. BL AP CP & CSC. I dont see any of these? In odin I have been clicking on AP and pointing to the md5 fil which fails. I think I need to get an image that has those 4 files.
Thanks again for your help on this
Steve
steve67474 said:
Hi XDHx86 I think I know what's going wrong here. All the images I have downloaded have 1 x.MD5. and 1 x.dll in them.
EG: I9505XXUHOJ2_I9505BTUHOJ1_I9505XXUHOJ2_HOME.tar.md5 and SS_DL.dll. Although some of the downloads say there should be 4 files. BL AP CP & CSC. I dont see any of these? In odin I have been clicking on AP and pointing to the md5 fil which fails. I think I need to get an image that has those 4 files.
Thanks again for your help on this
Steve
Click to expand...
Click to collapse
You can get your firmware from here. Whether it's stock or other variants that you want.
XDHx86 said:
You can get your firmware from here. Whether it's stock or other variants that you want.
Click to expand...
Click to collapse
Thanks for all your help. I resolved it in the end it was my cable. It was not a genuine charger cable. got my mitts on a proper one and it flashed no probs. Again thankd for advice.
Steve
steve67474 said:
Thanks for all your help. I resolved it in the end it was my cable. It was not a genuine charger cable. got my mitts on a proper one and it flashed no probs. Again thankd for advice.
Steve
Click to expand...
Click to collapse
Haha, that's really unexpected situation. I don't think anyone would have predicted that.
Anyway glad it worked out in the end.