Hello, here a plea for help.
I tried to flash my stock N8000 via this post: https://forum.xda-developers.com/showthread.php?t=1957002
I did try this several times, but it never completed: see the attached screen shot of what happens.
Now the device no longer boots normally. It begins to boot, then hangs on the Samsung logo.
Can someone help me here, as the original post seems dead....
thanks.
Start by flashing stock rom through Odin .
JJEgan said:
Start by flashing stock rom through Odin .
Click to expand...
Click to collapse
Hello, and thanks for responding. Could you give me a hint/howto on where the standard ROM might be, and how to flash, or where to read up on that?
Sorry, a bit of a noob on this...
thanks.
Firmware Updato.com or sammobile.com
howto use odin
http://updato.com/how-to/how-to-install-an-official-samsung-stock-firmware-using-odin
JJEgan said:
Firmware Updato.com or sammobile.com
howto use odin
http://updato.com/how-to/how-to-install-an-official-samsung-stock-firmware-using-odin
Click to expand...
Click to collapse
Thanks. Am driving right now. I'll try this later this evening.
Sent from my SM-N920C using Tapatalk
JJEgan said:
Firmware Updato.com or sammobile.com
Hello, as the device no longer boots its difficult to tell exactly which device it is, as there are at least 4 devices that seem to fit my device description. I've got the N8000, from GErmany, i received it as part of a package from E-plus. From that information there are 4 device ROM's available....one as late as 2015. Which should i take?
thanks again.
Click to expand...
Click to collapse
Hello,
I do need some help now. I believe i've followed all directions, but am not having success.
Again, my device is a Samsung N8000 Note 10.1. Purchased from Eplus Germany
I have read the directions in how to use Odin, and have followed them precisely.
Drivers installed.
Original Firmware downloaded (N8000XXUDNL1_N8000EPLDNL2_N8000XXUDNH1_Home.tar). But, in the compresesed file that I downloaded there was also another file (SS_DL.dll). Anyone know what this means?
I copied both files into the directory of Odin v3.12.13.
began Odin, then put the tablet into download mode, then connected it to my computer. There was a sound from my computer recognizing the tablet.
I then added the file firmware file (N8000XXUDNL1_N8000EPLDNL2_N8000XXUDNH1_Home.tar) into Odin under the AP tab. I checked that the re-partiton box was not checked, then klicked onto Start. But Odin failed after about 3 seconds.
Can anyone please help me here?
thanks.
Use tar file only .
<I copied both files into the directory of Odin v3.12.13.>Never heard of that before .
At a guess Odin cannot find the file or its not connected ID Box in odin shows as connected
Hello out there community...no one out there that can help me here? Please? ....
tjohnso1 said:
Hello,
I do need some help now. I believe i've followed all directions, but am not having success.
Again, my device is a Samsung N8000 Note 10.1. Purchased from Eplus Germany
I have read the directions in how to use Odin, and have followed them precisely.
Drivers installed.
Original Firmware downloaded (N8000XXUDNL1_N8000EPLDNL2_N8000XXUDNH1_Home.tar). But, in the compresesed file that I downloaded there was also another file (SS_DL.dll). Anyone know what this means?
I copied both files into the directory of Odin v3.12.13.
began Odin, then put the tablet into download mode, then connected it to my computer. There was a sound from my computer recognizing the tablet.
I then added the file firmware file (N8000XXUDNL1_N8000EPLDNL2_N8000XXUDNH1_Home.tar) into Odin under the AP tab. I checked that the re-partiton box was not checked, then klicked onto Start. But Odin failed after about 3 seconds.
Can anyone please help me here?
thanks.
Click to expand...
Click to collapse
JJEgan said:
Use tar file only .
<I copied both files into the directory of Odin v3.12.13.>Never heard of that before .
At a guess Odin cannot find the file or its not connected ID Box in odin shows as connected
Click to expand...
Click to collapse
Thanks for this. I will try this when i'm home this evening...hope it works. Thanks!
tjohnso1 said:
Thanks for this. I will try this when i'm home this evening...hope it works. Thanks!
Click to expand...
Click to collapse
Hello, sorry but i need some more help here please.
I've downloaded what i believe is the stock firmware for my device from updato.com: GT-N8000_EPL_1_20150303173500_n47626s3xd
This is a zipped package with two file in it:
N8000XXUDNL1_N8000EPLDNL2_N8000XXUDNH1_Home.tar.md5
and
SS_DL.dll
I've put both of these files into the directory where ODIN is. I have downloaded and tried serveral ODIN versions: v1.85, v3.10.6, v3.12.7, v3.12.3, v3.07
None of them work. After loading the tar file, ODIN begins, then after about 3 seconds stops and show the message "fail".
Attached is a screen shot of ODIN once i've loaded the tar file, and one that shows after the fail.
I've also added a picture of my note 10.1 N8000 while in download mode.
Anyone can help me here?
thanks.
Download file .
Unzip file .
Put file on desktop .
Open Odin
Locate tar file only and add to PDA or AP
firmware that you are trying to install is a downgrade and the secure bootloader (sboot) is blocking it.
JJEgan said:
Download file .
Unzip file .
Put file on desktop .
Open Odin
Locate tar file only and add to PDA or AP
firmware that you are trying to install is a downgrade and the secure bootloader (sboot) is blocking it.
Click to expand...
Click to collapse
Hello, and thanks.
What you have described above is exactly what i am doing. Are you saying that the reason it does not work is because the bootloader is blocking it? If so, how do i get around this?
I would really like to "upgrade", rather than downgrade. But at the moment i cannot find any other firmwares for my device. A few years ago I saw several ones, but not anymore.
Do you have a suggestion of which firmware I should install, and where i can get this?
Again, thanks so much for your help! I really appreciate it.
Looking at sammobile and updato last firmware is .
N8000XXSDQA7 android 4.4.2 .( the last version for note is 4.4.2 )
But they don't list bootloader versions .
JJEgan said:
Looking at sammobile and updato last firmware is .
N8000XXSDQA7 android 4.4.2 .( the last version for note is 4.4.2 )
But they don't list bootloader versions .
Click to expand...
Click to collapse
Hello, i'm not sure what this means. Which version should i use? and how?
That one flashed through Odin and hopefully its a later bootloader
JJEgan said:
That one flashed through Odin and hopefully its a later bootloader
Click to expand...
Click to collapse
Hello,
i tried to flash N8000XXSDQA7, but it also failed. Similar to all the others that i've tried to flash. I must be doing something fundamentally wrong, as the fail happeds after only about 3 seconds.
Any help you can offer? Really appreciate it.
thanks
I think that the bootloader section of your Note is damaged.The picture you posted shows right method of Odin flash
JJEgan said:
I think that the bootloader section of your Note is damaged.The picture you posted shows right method of Odin flash
Click to expand...
Click to collapse
Ok, but what do i do if the bootloader is damaged? Can i fix it or flash it with another bootloader?
thanks.
Yes if you can get another bootloader .
Further steps are beyond my knowledge but have a look here .
https://www.google.co.uk/search?q=x...x-b&gfe_rd=cr&dcr=0&ei=he5VWrvpOOqstgeTsYaICA
Related
Hi Friends,
I'm using Galaxy Fit which runs Chocobread V 3.20. I feel Chocobread is litte bit slow. You guys please help me to revert back of stock rom(I'm From India). Kindly explain the way in detail.
Thanks in advance
Regards,
B Balamurali
balamurali said:
Hi Friends,
I'm using Galaxy Fit which runs Chocobread V 3.20. I feel Chocobread is litte bit slow. You guys please help me to revert back of stock rom(I'm From India). Kindly explain the way in detail.
Thanks in advance
Regards,
B Balamurali
Click to expand...
Click to collapse
Install stock ROM with Odin Multi Downloader for Galaxy Fit S5670. Download Beni 1.0.ops.
Download stock ROM for India from here:
http://www.sammobile.com/firmware/
Turn off cell phone. Push the Power, Home and Down button together. When the yellow triangle, connect cell phone and a computer with a USB cable.
so... just flash it,, like flashing a stock rom (that cannot be upgrade via KIES) or like flashing CWM using ODIN? even if i already convert the file system to ext 4. coz for CWM 5 not support RFS system (like creed rom) No bootloop will happend?
-----edit------
just readed here http://forum.xda-developers.com/showthread.php?t=1711857 i'll give it a shot...
zack_rains said:
so... just flash it,, like flashing a stock rom (that cannot be upgrade via KIES) or like flashing CWM using ODIN? even if i already convert the file system to ext 4. coz for CWM 5 not support RFS system (like creed rom) No bootloop will happend?
-----edit------
just readed here http://forum.xda-developers.com/showthread.php?t=1711857 i'll give it a shot...
Click to expand...
Click to collapse
*****
sir, I am not tech savvy. can you explain in details with the files needed?
Thanks,
Balamurali
balamurali said:
*****
sir, I am not tech savvy. can you explain in details with the files needed?
Thanks,
Balamurali
Click to expand...
Click to collapse
first you need beni.ops file.. (just google it and download)
and for the firmware either you require a "one package file"(.tar)
or 4 different files BOOT,PHONE,CSC,PDA. You can get a firmware for fit from sammobile.com
last thing you need is ODIN multidownloader 4.38 for fit or later..
open odin.exe
tick onepackage if you have a single .tar firware file.
if you have four files then you need to carefully place respective file in respective option in "select image to download" section of ODIN. leave EFS empty.
Click on start and wait till your phone boots.
Alright! Im back to stock rom
Sent from my GT-S5670 using xda app-developers app
Stock Firmware For Cyprus
Hello!!
Do you know if there is available firmware for Cyprus???
I was looking to google but i didnt find anything
THANKS (Sorry for my bad english)
thats work dude thnx
I want to return to stock firmware after i install the "cm-10.2-20131012-EXPERIMENTAL-beni" but i can't find anywhere where i can download the latest 2.3.6 stock firmware has this mobile phone.
How i can find out which stock 2.3.6 firmware has this phone?
I don't know if it helps
s5670xwkt6
has it now.
Please HELP ME.
fits79 said:
I want to return to stock firmware after i install the "cm-10.2-20131012-EXPERIMENTAL-beni" but i can't find anywhere where i can download the latest 2.3.6 stock firmware has this mobile phone.
How i can find out which stock 2.3.6 firmware has this phone?
I don't know if it helps
s5670xwkt6
has it now.
Please HELP ME.
Click to expand...
Click to collapse
All the stock firmwares are available on www.sammobile.com/firmwares/
Harpratap said:
All the stock firmwares are available on www.sammobile.com/firmwares/
Click to expand...
Click to collapse
NO IT ISN'T.
Have you try to download any firmware for that site lately???
ALL THE FILES where uploaded to hotfile.com and now you can't download any of that so....
fits79 said:
NO IT ISN'T.
Have you try to download any firmware for that site lately???
ALL THE FILES where uploaded to hotfile.com and now you can't download any of that so....
Click to expand...
Click to collapse
The youtube link that I posted has mirrors to the same file.
Just google if you can't find. There are plenty of links available! :silly:
Which exactly rom i must download and install so the phone has the factory android 2.3.6?
Is that file correct from my gt-s5670?
I install it as one package file with odin program exist in that package as it show at the video and then i make the two clear choices from recovery menu.
THANKS
Happy Flashing
fits79 said:
Which exactly rom i must download and install so the phone has the factory android 2.3.6?
Is that file correct from my gt-s5670?
I install it as one package file with odin program exist in that package as it show at the video and then i make the two clear choices from recovery menu.
THANKS
Click to expand...
Click to collapse
Hi @fits79
You can find the required ODIN Firmware Package as you wish for the ODIN tool
http://www.sammobile.com/firmwares/ and put in the Device Model Number and download it
or complete Firmware Package of Gingerbread 2.3.6 DDKT3 you can find the link below
http://hotfile.com/dl/146050815/b3b9...2_INU.zip.html in case this link doesn't work please download the Packages from above link as I can't check it from my office so dntmnd
For ODIN Flashing Tool:
http://www.downloads.techdiscussion....ting-software/
and Procedure to Flash is:
- Shutdown Galaxy Fit and restart it in Recovery Mode. For that hold the volume down key + Home key and power key. Hold it for some seconds and leave it. The device will boot in recovery mode. When the yellow triangle, connect cell phone and a computer with a USB cable.
- Launch ODIN on your system. In that look under ID:COM section. The section will turn to yellow once the device is connected and detected.
- Now click on OPS. It will ask you to browse the downloaded firmware package. Browse to GIO_1.0.ops. Once it is selected click on One Package and choose S5670DDKT3_S5670ODDKT2_S5670DDKT2_HOME.tar.md5.
- Now click on Start. The update process has started and it will take few minutes to complete.
- Once it is done, the device will reboot itself. Later on you can go in Settings and checkout the firmware version.
:good::fingers-crossed:
Dead link
Everyone gives the same HotFile dead link.I google it to get some more link options but every single one has finally reached the same dead link.
Come on guys! I need that 1.0 ops file! It's not available on the internet right now.
mericturkbikmaz said:
Everyone gives the same HotFile dead link.I google it to get some more link options but every single one has finally reached the same dead link.
Come on guys! I need that 1.0 ops file! It's not available on the internet right now.
Click to expand...
Click to collapse
Meriç bro now(şimdi) its cloosed from ABD hotfile
Abhishek_DK said:
Hi @fits79
You can find the required ODIN Firmware Package as you wish for the ODIN tool
http://www.sammobile.com/firmwares/ and put in the Device Model Number and download it
or complete Firmware Package of Gingerbread 2.3.6 DDKT3 you can find the link below
http://hotfile.com/dl/146050815/b3b9...2_INU.zip.html in case this link doesn't work please download the Packages from above link as I can't check it from my office so dntmnd
For ODIN Flashing Tool:
http://www.downloads.techdiscussion....ting-software/
and Procedure to Flash is:
- Shutdown Galaxy Fit and restart it in Recovery Mode. For that hold the volume down key + Home key and power key. Hold it for some seconds and leave it. The device will boot in recovery mode. When the yellow triangle, connect cell phone and a computer with a USB cable.
- Launch ODIN on your system. In that look under ID:COM section. The section will turn to yellow once the device is connected and detected.
- Now click on OPS. It will ask you to browse the downloaded firmware package. Browse to GIO_1.0.ops. Once it is selected click on One Package and choose S5670DDKT3_S5670ODDKT2_S5670DDKT2_HOME.tar.md5.
- Now click on Start. The update process has started and it will take few minutes to complete.
- Once it is done, the device will reboot itself. Later on you can go in Settings and checkout the firmware version.
:good::fingers-crossed:
Click to expand...
Click to collapse
Its not GIO_1.0.ops.
Its BENI_v1.0.ops
all files r very important so always save those important file
Hi, I downloaded and installed some rom file earlier, and I followed the instructions correctly, but something must have gone wrong because I wasn't able to get into my recovery after that. I still have access to Odin mode though, so I tried flashing what (I think?) was the correct firmware file for my device, a G-920f dual sim. That didn't do anything for me. If anyone can help me out, and also a link to the firmware file would be appreciated, as I no longer have the original and the only ones I've been able to find have like a 3kb/s download speed, which would take many many hours.
Also, for the firmware, should I download lollipop or marshmallow? My phone was on 5.1 before this mess. If the firmware is for both, can you link me to both and I will try either?
You might try to install Samsung Smart Switch on your computer, which is able to pull updates from Samsung directly and update your phone.
In other cases, my experience is that samsung-updates.ru offers higher download speeds than the sites you might have visited (Google Translate is your friend).
find a lollipop Rom, either a custom from here or a stock one from sammobile. If you were rooted I recommend a custom rom from the s6 forum alternatively if you weren't rooted get a stock 5.1 for G-920f.
no go
So, I forgot to mention, I cant boot into the rom either. Its just odin mode, no recovery, no android. All the files on that russian website are for 6.0, btw, but I'll try it out
codewielder said:
So, I forgot to mention, I cant boot into the rom either. Its just odin mode, no recovery, no android. All the files on that russian website are for 6.0, btw, but I'll try it out
Click to expand...
Click to collapse
So did you try to install the Smart Switch app on your computer instead?
sanderg said:
So did you try to install the Smart Switch app on your computer instead?
Click to expand...
Click to collapse
Yep, its not supported apparently. Its a dual sim variant, maybe smart switch isnt compatible with that kind?
I'm getting this error when flashing my firmware file: "SW REV CHECK FAIL DEVICE 3 BINARY 1"
codewielder said:
I'm getting this error when flashing my firmware file: "SW REV CHECK FAIL DEVICE 3 BINARY 1"
Click to expand...
Click to collapse
Have you seen that?
http://forum.xda-developers.com/galaxy-s6/general/how-to-fix-rev-check-fail-device-2-t3146522
arena1 said:
Have you seen that?
http://forum.xda-developers.com/galaxy-s6/general/how-to-fix-rev-check-fail-device-2-t3146522
Click to expand...
Click to collapse
Yep but their download link is broken
Anyway, I got android 6 installed now, but I cant get booted into it....
My rooted Samsung Galaxy On5 (sm-g550t) is stuck on the black and white SAMSUNG logo boot screen, up at the top left in red is the message : "Custom binary blocked by FRP lock".
I cannot boot into recovery at all, but I CAN boot into download mode, and when connect it to a PC where Odin can "see" it. So that's good I guess.
Things I have tried so far:
1. Reflashing TWRP - FAIL IN ODIN (it worked before!)
2. Downloading new recovery from here and flashing in ODIN. FAIL IN ODIN (https://idlekernel.com/flash-tools/firmware/on5ltetmo_SM-G550T/G550TUVU1APF1/)
3. Recovery in KIES (does not accept my s/n and model combo)
This happened after I tried to partition the drive for use with the Marshmallow "adoptable storage" using directions from this web page.
http://www.modaco.com/news/android/...e-adoptable-storage-on-your-s7-s7-edge-r1632/
I DID do an nandroid backup before all of this happened, but without recovery mode it won't do me much good.
1. Any suggestions. 2. does anyone have the stock firmware tar that I can flash in odin to see if it works? Sammobile does not have firmware for the SM-G550t, sadly.
I really need your help. I can't find anything anywhere that has worked.
I figured it out. Thanks for the offer. I'll posting to the solution.
please i need your help on the same matter can u help me???
UKRooted said:
Hi
I can try to help you
Pm me
Click to expand...
Click to collapse
Pls i got this kind of problem can u help me???
UKRooted said:
I can bypass it via dongle remotely
Pm me with your Whatsapp/ Viber number
Click to expand...
Click to collapse
And what do you charge for these services???
oseiphilip97 said:
Pls i got this kind of problem can u help me???
Click to expand...
Click to collapse
http://forum.xda-developers.com/android/development/samsung-galaxy-on5-ultimate-files-dump-t3462103
UKRooted said:
Nothing
Just testing my dongle
Click to expand...
Click to collapse
Oh OK. I thought you might be an ambulance chaser. Sorry. How does the dongle work?
adrockr said:
I figured it out. Thanks for the offer. I'll posting to the solution.
Click to expand...
Click to collapse
i have exact same problem on my SM-G550T
do you have any solucion ?
ruzbehxxx said:
i have exact same problem on my SM-G550T
do you have any solucion ?
Click to expand...
Click to collapse
yes it's too simple....
just try to flash with (MetroPCS)
here is the link https://www.dropbox.com/s/cyuqgcoilg400ij/StockROM - G550T1 - UVU1APF1 v6.0.1 (MetroPCS).zip?dl=0
& fees back your result...
FRP Issues...
I have another NON-Destructive solution please pm me for details if anyone has similar issues with FRP
adrockr said:
My rooted Samsung Galaxy On5 (sm-g550t) is stuck on the black and white SAMSUNG logo boot screen, up at the top left in red is the message : "Custom binary blocked by FRP lock".
I cannot boot into recovery at all, but I CAN boot into download mode, and when connect it to a PC where Odin can "see" it. So that's good I guess.
Things I have tried so far:
1. Reflashing TWRP - FAIL IN ODIN (it worked before!)
2. Downloading new recovery from here and flashing in ODIN. FAIL IN ODIN (https://idlekernel.com/flash-tools/firmware/on5ltetmo_SM-G550T/G550TUVU1APF1/)
3. Recovery in KIES (does not accept my s/n and model combo)
This happened after I tried to partition the drive for use with the Marshmallow "adoptable storage" using directions from this web page.
http://www.modaco.com/news/android/...e-adoptable-storage-on-your-s7-s7-edge-r1632/
I DID do an nandroid backup before all of this happened, but without recovery mode it won't do me much good.
1. Any suggestions. 2. does anyone have the stock firmware tar that I can flash in odin to see if it works? Sammobile does not have firmware for the SM-G550t, sadly.
I really need your help. I can't find anything anywhere that has worked.
Click to expand...
Click to collapse
---------- Post added at 07:02 AM ---------- Previous post was at 07:00 AM ----------
Please note that this is very silly if you are NOT unlocked i have another NON-Destructive solution PM for info...
Bmsxoder89 said:
yes it's too simple....
just try to flash with (MetroPCS)
here is the link https://www.dropbox.com/s/cyuqgcoilg400ij/StockROM - G550T1 - UVU1APF1 v6.0.1 (MetroPCS).zip?dl=0
& fees back your result...
Click to expand...
Click to collapse
dbstrand24 said:
I have another NON-Destructive solution please pm me for details if anyone has similar issues with FRP
---------- Post added at 07:02 AM ---------- Previous post was at 07:00 AM ----------
Please note that this is very silly if you are NOT unlocked i have another NON-Destructive solution PM for info...
Click to expand...
Click to collapse
Hi Friends,
Can you share the SM-G550T firmware link to me.
Thx
Yo, I got you. Watch my youtube tutorial on how to fix this:
https://www.youtube.com/watch?v=c6Yy0f6qtHA&t=4s
I also included all necessary files (yes, including the firmware files that aren't available yet in sammobile)
There aren't any files linked, the link is dead and it seems to be a spam shortening service.
innoman said:
There aren't any files linked, the link is dead and it seems to be a spam shortening service.
Click to expand...
Click to collapse
For the video or are you talking about something else? If it's for the video, I just checked and everything is working fine.
Vi11un said:
For the video or are you talking about something else? If it's for the video, I just checked and everything is working fine.
Click to expand...
Click to collapse
Not the video, for the files in an earlier post. Sorry about that.
Edit:
Actually yeah, the links in the video goes to some weird spammy link service.
HOW?
adrockr said:
I figured it out. Thanks for the offer. I'll posting to the solution.
Click to expand...
Click to collapse
how did you do it can you tell me i have same exact problem and phone
Here!
vigilandrew723 said:
how did you do it can you tell me i have same exact problem and phone
Click to expand...
Click to collapse
Sorry for the delay. I think this is it, but you will find just about everything you could possibly need in this thread.
https://forum.xda-developers.com/an...files-dump-t3462103/post68872658#post68872658
Bmsxoder89 said:
yes it's too simple....
just try to flash with (MetroPCS)
here is the link https://www.dropbox.com/s/cyuqgcoilg400ij/StockROM - G550T1 - UVU1APF1 v6.0.1 (MetroPCS).zip?dl=0
& fees back your result...
Click to expand...
Click to collapse
EXCEPT that this link is no longer available for those of us who still might need it.
glennnall said:
EXCEPT that this link is no longer available for those of us who still might need it.
Click to expand...
Click to collapse
Go to Sammobile .com or samsung-updates. com and use your model number to find your stock firmware, download the one for your region/carrier and flash it using Odin on PC.
Sent from my SM-S903VL using Tapatalk
Droidriven said:
Go to Sammobile .com or samsung-updates. com and use your model number to find your stock firmware, download the one for your region/carrier and flash it using Odin on PC.
Sent from my SM-S903VL using Tapatalk
Click to expand...
Click to collapse
2 questions:
i read that Odin requires .md5 or .tar - are these roms which are found within the zip files .md5 or .tar?
i only see Stock ROMS from Thailand or China - does this matter?
glennnall said:
2 questions:
i read that Odin requires .md5 or .tar - are these roms which are found within the zip files .md5 or .tar?
i only see Stock ROMS from Thailand or China - does this matter?
Click to expand...
Click to collapse
Usually the stock .tar firmwares are uploaded as a .zip to make the file smaller, extract it and you should have a .tar.md5 or a .tar, if it's .tar then you may have to extract that also to get to the .tar.md5.
Yes, typically the region matters due to differences in networks in each region.
Sent from my SM-S903VL using Tapatalk
Hi guys
I think that i'm doing things right...
1) I have Samsung USB drivers installed
2) I'm using Odin3.11
3) I'm using the correct params for 7.0 ( BL,AP,CP, Home_CSC in Odin )
3) Odin Options ( F.ResetTime, Auto-reboot,Repartion) all unticked
4) On the S7 USB debugging is On
I put the tel in DL mode and here is the list of what Odin spits at me...once launched
Log Screen
-Odin Checking v 3.1101
-File analysis
-Skip file for home binary
-param.bin
-modem_debug.bin
-Home binary Download
-Setup Connection
-Initialisation
-Set PIT for mappjng
-Firmware update Start
-Single Download
-sboot.bin
-Nand Write Start
-cm.bin
FAIL!
Am I missing someting or did something wrong ?
Thks in advance !!
Use ODIN 3.12.3 or newer
And which model S7 is it?
*Detection* said:
Use ODIN 3.12.3 or newer
And which model S7 is it?
Click to expand...
Click to collapse
S7 Flat 930F with Exynos
zorglub! said:
S7 Flat 930F with Exynos
Click to expand...
Click to collapse
Try the newer version of ODIN
Code:
https://mega.nz/#!jUgRiTSa!fnAVwr7yFi4dlPk4V0oQ5DuoFe3iiG0jH-ws91IHOPc
Leave ODIN as it is, don't change any settings, just add the 4 sections of firmware and hit Start
zorglub! said:
S7 Flat 930F with Exynos
Click to expand...
Click to collapse
I've used Odin 3.12.3...same stuff FAIL after step cm.bin
*Detection* said:
Try the newer version of ODIN
Code:
https://mega.nz/#!jUgRiTSa!fnAVwr7yFi4dlPk4V0oQ5DuoFe3iiG0jH-ws91IHOPc
Leave ODIN as it is, don't change any settings, just add the 4 sections of firmware and hit Start
Click to expand...
Click to collapse
Do you mean AP,BL, CP and Home_CSC ?
It is what I did ( with Odin 3.11 and 3.12.3) but same message FAIL after cm.bin step
zorglub! said:
Do you mean AP,BL, CP and Home_CSC ?
It is what I did ( with Odin 3.11 and 3.12.3) but same message FAIL after cm.bin step
Click to expand...
Click to collapse
and same tuff with Odin 3.12.7
Edit: Derp, wrong forum VZW won't help you The instructions in mine only say to use ap, cp, and csc but archive does include all. Wondering if you are just flashing more than needed?
I also experienced this yesterday. Let me share to you what I did. It might help.
1. Download the stock firmware.
2. Go to download mode.
3. Flash in odin the AP from the stock firmware and csc (not home). For BL and CP, I downloaded the latest files from this link: https://androidfilehost.com/?w=files&flid=95565 (i got it from here: https://forum.xda-developers.com/galaxy-s7/how-to/guide-onelatest-stock-fw-csc-root-t3702963)
I hope it works.
djh816 said:
Edit: Derp, wrong forum VZW won't help you The instructions in mine only say to use ap, cp, and csc but archive does include all. Wondering if you are just flashing more than needed?
Click to expand...
Click to collapse
VZW ???
zorglub! said:
VZW ???
Click to expand...
Click to collapse
Hahah yessir... Sorry, I have both S7 forums favorited. Context wise I thought I was replying to a Verizon thread.. My mistake
jaypeeb0917 said:
I also experienced this yesterday. Let me share to you what I did. It might help.
1. Download the stock firmware.
2. Go to download mode.
3. Flash in odin the AP from the stock firmware and csc (not home). For BL and CP, I downloaded the latest files from this link: https://androidfilehost.com/?w=files&flid=95565 (i got it from here: https://forum.xda-developers.com/galaxy-s7/how-to/guide-onelatest-stock-fw-csc-root-t3702963)
I hope it works.
Click to expand...
Click to collapse
thks Mate, I'll do it tomorrow...( fairly late here...) and let u know
Thks anyway
djh816 said:
Hahah yessir... Sorry, I have both S7 forums favorited. Context wise I thought I was replying to a Verizon thread.. My mistake
Click to expand...
Click to collapse
No problem...
But I had absolutely no idea what u were talking about....clear now !!!
jaypeeb0917 said:
I also experienced this yesterday. Let me share to you what I did. It might help.
1. Download the stock firmware.
2. Go to download mode.
3. Flash in odin the AP from the stock firmware and csc (not home). For BL and CP, I downloaded the latest files from this link: https://androidfilehost.com/?w=files&flid=95565 (i got it from here: https://forum.xda-developers.com/galaxy-s7/how-to/guide-onelatest-stock-fw-csc-root-t3702963)
I hope it works.
Click to expand...
Click to collapse
Not had a chance to work on subject Sunday...
WIll give a try, following yr suggestions, probably tomorrow...and we'll see
thks again
jaypeeb0917 said:
I also experienced this yesterday. Let me share to you what I did. It might help.
1. Download the stock firmware.
2. Go to download mode.
3. Flash in odin the AP from the stock firmware and csc (not home). For BL and CP, I downloaded the latest files from this link: https://androidfilehost.com/?w=files&flid=95565 (i got it from here: https://forum.xda-developers.com/galaxy-s7/how-to/guide-onelatest-stock-fw-csc-root-t3702963)
I hope it works.
Click to expand...
Click to collapse
Thks for having pointed meto the right direction...and make ùe discover my mistake...
I was using the wrong base or trying to estore to the wrong base...
Now it is fixed and i'm back to Stock
Thks again
zorglub! said:
Thks for having pointed meto the right direction...and make ùe discover my mistake...
I was using the wrong base or trying to estore to the wrong base...
Now it is fixed and i'm back to Stock
Thks again
Click to expand...
Click to collapse
I am glad it worked. I hope my suggestion worked too. XD
Hey guys i am very new to this and have done a lot of research and i'm in need of some help, I tried to put new firmware onto my Samsung S7 but it failed, long story short i can't get it to boot up normally now. I can put it into download mode and then the recovery mode.
In Download mode it says this
Product Name: SM-G930F
Current Binary: Samsung Official
System Status: Custom
FRP Lock: On
Secure Download: Enabled
Warranty Void: 0
In Recovery Mode it says
samsung/heroltexx/herolte
7.0/NRD90M/G930FXXU1DQJ1
No Support SINGLE - SKU
Supported API: 3
dm-Verity error ...
E: Failed to mount /system (Invalid Argument)
I have done this in the past and haven't had any issues with it, but no matter what i do i cant get it to boot up. I've tried the kies and smart switch to put the normal firmware back on but it says this device isn't supported and so it wont load it on. I have tried multiple firmwares from sammobile using AP,BL,CP and i did put in the CSC one also at some stage.
I hope this is enough information if i have missed anything please let me know, hopefully someone has some answers or suggestions. Thanks guys
Make sure you are using ODIN 3.12.3 or newer, older versions don't work properly
First off, Kies no longer supports Galaxy S7, actually never did.
What you can try, use odin (latest version 3.12.7 I think), download your firmware and include all 5 files in odin. You cannot ignore CSC file.
So in order, put BL, AP, CP and CSC and... pit file.
In order to have pit file, you need to make o copy of CSC file, change extension of that copy file to .zip, extract files and inside you will find pit file. Include it in odin in Pit card.
Then flash your phone and report back.
*Detection* said:
Make sure you are using ODIN 3.12.3 or newer, older versions don't work properly
Click to expand...
Click to collapse
Yeah i was using an older version but i downloaded the latest one and still no luck
Cholek3 said:
First off, Kies no longer supports Galaxy S7, actually never did.
What you can try, use odin (latest version 3.12.7 I think), download your firmware and include all 5 files in odin. You cannot ignore CSC file.
So in order, put BL, AP, CP and CSC and... pit file.
In order to have pit file, you need to make o copy of CSC file, change extension of that copy file to .zip, extract files and inside you will find pit file. Include it in odin in Pit card.
Then flash your phone and report back.
Click to expand...
Click to collapse
Have not tried this, will give it a shot and get back to you!
Cholek3 said:
First off, Kies no longer supports Galaxy S7, actually never did.
What you can try, use odin (latest version 3.12.7 I think), download your firmware and include all 5 files in odin. You cannot ignore CSC file.
So in order, put BL, AP, CP and CSC and... pit file.
In order to have pit file, you need to make o copy of CSC file, change extension of that copy file to .zip, extract files and inside you will find pit file. Include it in odin in Pit card.
Then flash your phone and report back.
Click to expand...
Click to collapse
No Luck, i tried what you said and this is what happens
https://imgur.com/a/QQGAn
Re-Partition was automatically ticked, should i try it again and have it un-ticked? or have i totally buggered it?
Try different cable and/or USB port and/or even computer.
Your phone is ok-ish. You only have to manage to flash software and should be up and running.
Cholek3 said:
Try different cable and/or USB port and/or even computer.
Your phone is ok-ish. You only have to manage to flash software and should be up and running.
Click to expand...
Click to collapse
Well im glad its alright haha, ill keep trying different things as you suggested! Hopefully i have some luck. Thank you
Okay bit of an update on what i have attempted - Still no luck at all,
Tried different Odin verisons
Tried multiple firmwares all downloaded from SamMobile & Correct country/carrier etc
The BL,CP and CSC all seem to work fine when i do them by themselves or seperately but i can never get AP to work, it always fails at Sys.img and doesn't go any further.. it always fails about 1/4 of the way through
Tried the PIT partition with and without re-partition clicked
Tried different cables and Ports
anyone have anymore suggestions or is it dead
Did you try using Smart Switch on pc and recover software that way?
Cholek3 said:
Did you try using Smart Switch on pc and recover software that way?
Click to expand...
Click to collapse
Yeah, it says device isn't supported.. when i click on emergency software recovery nothing shows up..
I have run out of options. Sorry.
Cholek3 said:
I have run out of options. Sorry.
Click to expand...
Click to collapse
No worries, ill keep trying and report back if i have any success
will91491 said:
Yeah i was using an older version but i downloaded the latest one and still no luck
Click to expand...
Click to collapse
Phone must be in Download Mode for ODIN
Make sure you have downloaded the correct firmware
It could be the internal memory fault. That's why it stops at 1/4 each time.
*Detection* said:
Phone must be in Download Mode for ODIN
Make sure you have downloaded the correct firmware
Click to expand...
Click to collapse
Yeah i know this much, have done it also
Cholek3 said:
It could be the internal memory fault. That's why it stops at 1/4 each time.
Click to expand...
Click to collapse
Might give it a shot at replacing it, its ****ed either way as far as i can see. I've worked on a lot of iPhone diodes/chips so hopefully i can do this one. Will report back in a few weeks
Tried a different PC?
*Detection* said:
Tried a different PC?
Click to expand...
Click to collapse
Thats what I suggested earlier on, but there seems to be loads of other threads recently, where people's phones fails at loading "system" in odin.