please neeeeed pit file n8000 original pit file to flash phone
THE RULES
Please only post ROM Development, Hacks, Mods, Fixes and Tutorials in the development section, all questions go in Q&A. This prevents the development section getting clogged up by irrelevant posts.
Try sammobile .com for PIT .
jje
all firmwares on sammobile dose not have pit
all firmwares on sammobile dose not have pit for n8000 i download all firmwares
dvdaio said:
all firmwares on sammobile dose not have pit for n8000 i download all firmwares
Click to expand...
Click to collapse
Try here. Not 100% sure about it though.
boss here but there is not pit file all are 1 tar file only
I think ur odin failed while installing modem. Try to flash cwm via odin. Worked for me if it's the problem
no no fail with me
i neeed to reparttion my device so how can we fix it i need pit file for this modle
Mate, no one seems to have it. We can't give what we don't have....
You could try a general Google search .
jje
You brick a lot of devices...
Sent from my ADR6425LVW using Tapatalk 2
dvdaio said:
please neeeeed pit file n8000 original pit file to flash phone
Click to expand...
Click to collapse
I have found pit file for N8000 in a russian site.
Reading this file in hexeditor i have found also where is pit file in N8000 (dev\block and address; probably the same address for 8010, 8020...)
I have made a bat file for saving from pc this file from your N8000 in sdcard
You can found all in my post here http://www.androidiani.com/forum/modding-samsung-galaxy-note-10-1/296023-n8000-pit-file.html
You want to post the .pit file here instead of a link to an Italian(?) site?
I can't read that language and don't want to have to join another foreign site to get something considering I already get spammed by a few other sites in french, russian and ?....
ultramag69 said:
You want to post the .pit file here instead of a link to an Italian(?) site?
I can't read that language and don't want to have to join another foreign site to get something considering I already get spammed by a few other sites in french, russian and ?....
Click to expand...
Click to collapse
Ok (and sorry) i have made a new thread http://forum.xda-developers.com/showthread.php?p=41158546#post41158546 for best visibility on this issue.
I hope I have done well
No worries mate, I probably came off a bit waspish as I just finished work with only a few hours sleep between shifts....
Thanks for reposting the .pit file as there are a few guys on here that probably need it.... :good:
I'm going to test the pit and files, cause I've got some /efs problem. I'm going to downgrade and try to get back in life my n8000. I'll post some feedback after my try today. Thanks!
Related
Hey everyone,
I need someone to pull up and post a .pit file for the Samsung Galaxy Note 10.1 GT-N8013 because I can't use OTG host, and the unit no longer charges on USB. This happened after the incorrect ROM was loaded on the device, which I thought was the correct ROM oops.
Thanks for any help
Might be found on sammobile.com .
jje
JJEgan said:
Might be found on sammobile.com .
jje
Click to expand...
Click to collapse
Hey,
I looked there and didn't find it. Also, maybe I don't need a pit file. The main issue is at when my system is restored USB does not work and the system will not charge through USB. This happened using teamwin recovery and installing the incorrect rom, AOKP P4wifi instead of P4notewifi as I had forgotten the correct name for the device. The next step is that I had to do a mke2fs on /efs to make /efs mount which is why I thought I needed a pit file to repartition the entire device and restore the software.
Any help at all to make the device work properly again would rock. I'll post a solution here and to my company knowledge base once a fix is found.
Thanks everyone
Hello,
I guess I need the 4.0.4 stock rom or something from samsung that I can write to the device that will blow away all customizations and return it to as if I pulled it out of the box originally. Something is REALLY FRELLED UP.
HELP ME I'M A MORN!!!! apparently...
pit file download
Droiddevelopers a com site has the pit file. Hope this helps
marcusah123 said:
Hello,
I guess I need the 4.0.4 stock rom or something from samsung that I can write to the device that will blow away all customizations and return it to as if I pulled it out of the box originally. Something is REALLY FRELLED UP.
HELP ME I'M A MORN!!!! apparently...
Click to expand...
Click to collapse
You can find the latest stock 4.0.4 here, you must register to download.
http://www.sammobile.com/firmware/?page=3&model=GT-N8013&pcode=0&os=1&type=3#firmware
stevessvt said:
You can find the latest stock 4.0.4 here, you must register to download.
http://www.sammobile.com/firmware/?page=3&model=GT-N8013&pcode=0&os=1&type=3#firmware
Click to expand...
Click to collapse
I dont find any downloads on that site for the usa n8013 ueclk8 wifi only. There is only a download for cellular south products and thats a cell phone company in my area.
Ive used it on my 10.1, no problems.
Hey
I didn't find a pit file on that website for my device no links.
Ideas?
Hack pit file..
marcusah123 said:
Hey
I didn't find a pit file on that website for my device no links.
Ideas?
Click to expand...
Click to collapse
I have the same problem.. Can we use the pit file of gt-8010?? WHo can hack it?
conan1600 said:
I dont find any downloads on that site for the usa n8013 ueclk8 wifi only. There is only a download for cellular south products and thats a cell phone company in my area.
Click to expand...
Click to collapse
The Cellular South file IS the 8013. I have no idea why it is labeled as that, but I have used both 4.0.4 & 4.1.2 from Sammobile for my 8013. Trust me, both work.
losguy said:
Droiddevelopers a com site has the pit file. Hope this helps
Click to expand...
Click to collapse
So are you going to provide a link to a file or even a valid website? Otherwise, no, this doesn't help, even a little.
Hello,
as you stand tablet / GT-N8000 / went out like battery fell while trying to turn it on again started to load only the logo Samsung.Put some rom, but the result was the same. After trial runs as he showed me ... / images /.
Now I want to find
PIT: GT-N8xxx_note10.1.pit
PDA: CODE_N8000xxxxxx_....tar
PHONE: MODEM_N8000xxxxxx_....tar
CSC: CSC_Oxx_N8000xxxxxx_....tar
so I can flash through Odin a stock of rom, but I searched the internet and so I could not find any files. Can someone if you have to tell them no Pap somewhere and get them pulled or if there is another option to fix this .....
Greetings!
Thanks in advance for your help!
did u backup your efs before? if no, the easiest way to solve it is send the device to Samsung sc.
No, not backup. If anyone can upload the four files.
mukito said:
No, not backup. If anyone can upload the four files.
Click to expand...
Click to collapse
Firmware from sammobile.com .
PIT is dangerous wrong PIT = dead phone .
Title says EFS and CSC problems ????
jje
JJEgan said:
Firmware from sammobile.com .
PIT is dangerous wrong PIT = dead phone .
Title says EFS and CSC problems ????
jje
Click to expand...
Click to collapse
Well I think so because what is seen in the photos is that there is no CSC file. However, to install in Odin requires 4 second file, and until then I can only try to fix EFS ... or wrong ...
I can not get no rom to go, all charged to the logo of Samsung and there. So look for PIT and other files.
ODIN just requires the 1 file to flash - PDA. This is the rom, .tar file you wish to flash... You don't require a pit file however, I might as well hand a child the key to the gun cabinet, go here - http://forum.xda-developers.com/showthread.php?t=2268735 to find a pit file.
Again, you put pit file in pit file part and the rom .tar file into pda to flash.... CSC and Modem are included...
This still may not fix your tablet as it looks for the previous information first...
Hello everybody,
I'm sorry if I have put this in the wrong fourm but still, can anyone find me the PIT file for the SM-G925F and I would like JUST the pit file, nothing else.
Thank you!
(BTW I am new to XDA!)
You probably can start from yakapa40's pit file thread here:
http://forum.xda-developers.com/galaxy-s6/general/g920f-pit-file-banded-firmwares-t3118459
You have an S6 Edge, this is the S6 forum. Might be better asking here:
http://forum.xda-developers.com/galaxy-s6-edge
Re
I finden a way to unbrick my sm g925f with a Tool Release by Samsung called smart sich
If the Flash want Work with odin try to use smart switch emergency restore. This Tool can restore to factoy default when odin Stuck on Flash to nand or someting else try smart switch
Thanks everyone for replying but my friend has the same phone as me and gave me his pit file, thank you!
NH-Gaming said:
Thanks everyone for replying but my friend has the same phone as me and gave me his pit file, thank you!
Click to expand...
Click to collapse
Hi,
could you please share it? Can't find it on the net...
Hello, here a plea for help.
I tried to flash my stock N8000 via this post: https://forum.xda-developers.com/showthread.php?t=1957002
I did try this several times, but it never completed: see the attached screen shot of what happens.
Now the device no longer boots normally. It begins to boot, then hangs on the Samsung logo.
Can someone help me here, as the original post seems dead....
thanks.
Start by flashing stock rom through Odin .
JJEgan said:
Start by flashing stock rom through Odin .
Click to expand...
Click to collapse
Hello, and thanks for responding. Could you give me a hint/howto on where the standard ROM might be, and how to flash, or where to read up on that?
Sorry, a bit of a noob on this...
thanks.
Firmware Updato.com or sammobile.com
howto use odin
http://updato.com/how-to/how-to-install-an-official-samsung-stock-firmware-using-odin
JJEgan said:
Firmware Updato.com or sammobile.com
howto use odin
http://updato.com/how-to/how-to-install-an-official-samsung-stock-firmware-using-odin
Click to expand...
Click to collapse
Thanks. Am driving right now. I'll try this later this evening.
Sent from my SM-N920C using Tapatalk
JJEgan said:
Firmware Updato.com or sammobile.com
Hello, as the device no longer boots its difficult to tell exactly which device it is, as there are at least 4 devices that seem to fit my device description. I've got the N8000, from GErmany, i received it as part of a package from E-plus. From that information there are 4 device ROM's available....one as late as 2015. Which should i take?
thanks again.
Click to expand...
Click to collapse
Hello,
I do need some help now. I believe i've followed all directions, but am not having success.
Again, my device is a Samsung N8000 Note 10.1. Purchased from Eplus Germany
I have read the directions in how to use Odin, and have followed them precisely.
Drivers installed.
Original Firmware downloaded (N8000XXUDNL1_N8000EPLDNL2_N8000XXUDNH1_Home.tar). But, in the compresesed file that I downloaded there was also another file (SS_DL.dll). Anyone know what this means?
I copied both files into the directory of Odin v3.12.13.
began Odin, then put the tablet into download mode, then connected it to my computer. There was a sound from my computer recognizing the tablet.
I then added the file firmware file (N8000XXUDNL1_N8000EPLDNL2_N8000XXUDNH1_Home.tar) into Odin under the AP tab. I checked that the re-partiton box was not checked, then klicked onto Start. But Odin failed after about 3 seconds.
Can anyone please help me here?
thanks.
Use tar file only .
<I copied both files into the directory of Odin v3.12.13.>Never heard of that before .
At a guess Odin cannot find the file or its not connected ID Box in odin shows as connected
Hello out there community...no one out there that can help me here? Please? ....
tjohnso1 said:
Hello,
I do need some help now. I believe i've followed all directions, but am not having success.
Again, my device is a Samsung N8000 Note 10.1. Purchased from Eplus Germany
I have read the directions in how to use Odin, and have followed them precisely.
Drivers installed.
Original Firmware downloaded (N8000XXUDNL1_N8000EPLDNL2_N8000XXUDNH1_Home.tar). But, in the compresesed file that I downloaded there was also another file (SS_DL.dll). Anyone know what this means?
I copied both files into the directory of Odin v3.12.13.
began Odin, then put the tablet into download mode, then connected it to my computer. There was a sound from my computer recognizing the tablet.
I then added the file firmware file (N8000XXUDNL1_N8000EPLDNL2_N8000XXUDNH1_Home.tar) into Odin under the AP tab. I checked that the re-partiton box was not checked, then klicked onto Start. But Odin failed after about 3 seconds.
Can anyone please help me here?
thanks.
Click to expand...
Click to collapse
JJEgan said:
Use tar file only .
<I copied both files into the directory of Odin v3.12.13.>Never heard of that before .
At a guess Odin cannot find the file or its not connected ID Box in odin shows as connected
Click to expand...
Click to collapse
Thanks for this. I will try this when i'm home this evening...hope it works. Thanks!
tjohnso1 said:
Thanks for this. I will try this when i'm home this evening...hope it works. Thanks!
Click to expand...
Click to collapse
Hello, sorry but i need some more help here please.
I've downloaded what i believe is the stock firmware for my device from updato.com: GT-N8000_EPL_1_20150303173500_n47626s3xd
This is a zipped package with two file in it:
N8000XXUDNL1_N8000EPLDNL2_N8000XXUDNH1_Home.tar.md5
and
SS_DL.dll
I've put both of these files into the directory where ODIN is. I have downloaded and tried serveral ODIN versions: v1.85, v3.10.6, v3.12.7, v3.12.3, v3.07
None of them work. After loading the tar file, ODIN begins, then after about 3 seconds stops and show the message "fail".
Attached is a screen shot of ODIN once i've loaded the tar file, and one that shows after the fail.
I've also added a picture of my note 10.1 N8000 while in download mode.
Anyone can help me here?
thanks.
Download file .
Unzip file .
Put file on desktop .
Open Odin
Locate tar file only and add to PDA or AP
firmware that you are trying to install is a downgrade and the secure bootloader (sboot) is blocking it.
JJEgan said:
Download file .
Unzip file .
Put file on desktop .
Open Odin
Locate tar file only and add to PDA or AP
firmware that you are trying to install is a downgrade and the secure bootloader (sboot) is blocking it.
Click to expand...
Click to collapse
Hello, and thanks.
What you have described above is exactly what i am doing. Are you saying that the reason it does not work is because the bootloader is blocking it? If so, how do i get around this?
I would really like to "upgrade", rather than downgrade. But at the moment i cannot find any other firmwares for my device. A few years ago I saw several ones, but not anymore.
Do you have a suggestion of which firmware I should install, and where i can get this?
Again, thanks so much for your help! I really appreciate it.
Looking at sammobile and updato last firmware is .
N8000XXSDQA7 android 4.4.2 .( the last version for note is 4.4.2 )
But they don't list bootloader versions .
JJEgan said:
Looking at sammobile and updato last firmware is .
N8000XXSDQA7 android 4.4.2 .( the last version for note is 4.4.2 )
But they don't list bootloader versions .
Click to expand...
Click to collapse
Hello, i'm not sure what this means. Which version should i use? and how?
That one flashed through Odin and hopefully its a later bootloader
JJEgan said:
That one flashed through Odin and hopefully its a later bootloader
Click to expand...
Click to collapse
Hello,
i tried to flash N8000XXSDQA7, but it also failed. Similar to all the others that i've tried to flash. I must be doing something fundamentally wrong, as the fail happeds after only about 3 seconds.
Any help you can offer? Really appreciate it.
thanks
I think that the bootloader section of your Note is damaged.The picture you posted shows right method of Odin flash
JJEgan said:
I think that the bootloader section of your Note is damaged.The picture you posted shows right method of Odin flash
Click to expand...
Click to collapse
Ok, but what do i do if the bootloader is damaged? Can i fix it or flash it with another bootloader?
thanks.
Yes if you can get another bootloader .
Further steps are beyond my knowledge but have a look here .
https://www.google.co.uk/search?q=x...x-b&gfe_rd=cr&dcr=0&ei=he5VWrvpOOqstgeTsYaICA
Hi guys
I think that i'm doing things right...
1) I have Samsung USB drivers installed
2) I'm using Odin3.11
3) I'm using the correct params for 7.0 ( BL,AP,CP, Home_CSC in Odin )
3) Odin Options ( F.ResetTime, Auto-reboot,Repartion) all unticked
4) On the S7 USB debugging is On
I put the tel in DL mode and here is the list of what Odin spits at me...once launched
Log Screen
-Odin Checking v 3.1101
-File analysis
-Skip file for home binary
-param.bin
-modem_debug.bin
-Home binary Download
-Setup Connection
-Initialisation
-Set PIT for mappjng
-Firmware update Start
-Single Download
-sboot.bin
-Nand Write Start
-cm.bin
FAIL!
Am I missing someting or did something wrong ?
Thks in advance !!
Use ODIN 3.12.3 or newer
And which model S7 is it?
*Detection* said:
Use ODIN 3.12.3 or newer
And which model S7 is it?
Click to expand...
Click to collapse
S7 Flat 930F with Exynos
zorglub! said:
S7 Flat 930F with Exynos
Click to expand...
Click to collapse
Try the newer version of ODIN
Code:
https://mega.nz/#!jUgRiTSa!fnAVwr7yFi4dlPk4V0oQ5DuoFe3iiG0jH-ws91IHOPc
Leave ODIN as it is, don't change any settings, just add the 4 sections of firmware and hit Start
zorglub! said:
S7 Flat 930F with Exynos
Click to expand...
Click to collapse
I've used Odin 3.12.3...same stuff FAIL after step cm.bin
*Detection* said:
Try the newer version of ODIN
Code:
https://mega.nz/#!jUgRiTSa!fnAVwr7yFi4dlPk4V0oQ5DuoFe3iiG0jH-ws91IHOPc
Leave ODIN as it is, don't change any settings, just add the 4 sections of firmware and hit Start
Click to expand...
Click to collapse
Do you mean AP,BL, CP and Home_CSC ?
It is what I did ( with Odin 3.11 and 3.12.3) but same message FAIL after cm.bin step
zorglub! said:
Do you mean AP,BL, CP and Home_CSC ?
It is what I did ( with Odin 3.11 and 3.12.3) but same message FAIL after cm.bin step
Click to expand...
Click to collapse
and same tuff with Odin 3.12.7
Edit: Derp, wrong forum VZW won't help you The instructions in mine only say to use ap, cp, and csc but archive does include all. Wondering if you are just flashing more than needed?
I also experienced this yesterday. Let me share to you what I did. It might help.
1. Download the stock firmware.
2. Go to download mode.
3. Flash in odin the AP from the stock firmware and csc (not home). For BL and CP, I downloaded the latest files from this link: https://androidfilehost.com/?w=files&flid=95565 (i got it from here: https://forum.xda-developers.com/galaxy-s7/how-to/guide-onelatest-stock-fw-csc-root-t3702963)
I hope it works.
djh816 said:
Edit: Derp, wrong forum VZW won't help you The instructions in mine only say to use ap, cp, and csc but archive does include all. Wondering if you are just flashing more than needed?
Click to expand...
Click to collapse
VZW ???
zorglub! said:
VZW ???
Click to expand...
Click to collapse
Hahah yessir... Sorry, I have both S7 forums favorited. Context wise I thought I was replying to a Verizon thread.. My mistake
jaypeeb0917 said:
I also experienced this yesterday. Let me share to you what I did. It might help.
1. Download the stock firmware.
2. Go to download mode.
3. Flash in odin the AP from the stock firmware and csc (not home). For BL and CP, I downloaded the latest files from this link: https://androidfilehost.com/?w=files&flid=95565 (i got it from here: https://forum.xda-developers.com/galaxy-s7/how-to/guide-onelatest-stock-fw-csc-root-t3702963)
I hope it works.
Click to expand...
Click to collapse
thks Mate, I'll do it tomorrow...( fairly late here...) and let u know
Thks anyway
djh816 said:
Hahah yessir... Sorry, I have both S7 forums favorited. Context wise I thought I was replying to a Verizon thread.. My mistake
Click to expand...
Click to collapse
No problem...
But I had absolutely no idea what u were talking about....clear now !!!
jaypeeb0917 said:
I also experienced this yesterday. Let me share to you what I did. It might help.
1. Download the stock firmware.
2. Go to download mode.
3. Flash in odin the AP from the stock firmware and csc (not home). For BL and CP, I downloaded the latest files from this link: https://androidfilehost.com/?w=files&flid=95565 (i got it from here: https://forum.xda-developers.com/galaxy-s7/how-to/guide-onelatest-stock-fw-csc-root-t3702963)
I hope it works.
Click to expand...
Click to collapse
Not had a chance to work on subject Sunday...
WIll give a try, following yr suggestions, probably tomorrow...and we'll see
thks again
jaypeeb0917 said:
I also experienced this yesterday. Let me share to you what I did. It might help.
1. Download the stock firmware.
2. Go to download mode.
3. Flash in odin the AP from the stock firmware and csc (not home). For BL and CP, I downloaded the latest files from this link: https://androidfilehost.com/?w=files&flid=95565 (i got it from here: https://forum.xda-developers.com/galaxy-s7/how-to/guide-onelatest-stock-fw-csc-root-t3702963)
I hope it works.
Click to expand...
Click to collapse
Thks for having pointed meto the right direction...and make ùe discover my mistake...
I was using the wrong base or trying to estore to the wrong base...
Now it is fixed and i'm back to Stock
Thks again
zorglub! said:
Thks for having pointed meto the right direction...and make ùe discover my mistake...
I was using the wrong base or trying to estore to the wrong base...
Now it is fixed and i'm back to Stock
Thks again
Click to expand...
Click to collapse
I am glad it worked. I hope my suggestion worked too. XD