Related
i have the tf300 with asus hydro rom v4.0a and everytime i run benchmark in antutu i get about 9568 or around about, how do i get 1200+?
get ezoverclock
and then go to normal mode, then your pad runs at 1500Mhz
normal? you mean performance 1.6ghz?? i want 1200+ antutu which one will work
mox123 said:
normal? you mean performance 1.6ghz?? i want 1200+ antutu which one will work
Click to expand...
Click to collapse
Performance mode in Ez 1600,yes
After this you have to change the Asus mode too. This has to be changed to normal mode
mikaole said:
Performance mode in Ez 1600,yes
After this you have to change the Asus mode too. This has to be changed to normal mode
Click to expand...
Click to collapse
ok how do i change asus mode to normal? i dont understand i just rooted and cwm my tablet today, why does it need to be normal
ok i figured it out, i had to go into settings then assus and choose performance mode
anyone has it?
lol nobody?
http://www.prestigio.com/products/Smartphones/MultiPhone
kmetek said:
lol nobody?
http://www.prestigio.com/products/Smartphones/MultiPhone
Click to expand...
Click to collapse
Going to have mine in a few days. It looks like a decent phone for a little money. Rooting it (if it wont come prerooted) will probably will not possible in a near future.
I have 4040 it is basically same model
sound on mp3 is very low
camera have 8mp not 5
gps is very inaccurate but after some time (4 min) i get the location bu it is still about 50-100 incorect
but it is still a very decent phone it is not rooted need to figure out a way
there is a recovery and factory mode
recovery mode have a install update from sd card option
vipe dalvik/ cache
backup and restore user data
factory mode is for tests
Android System recovery <3e>
i too have 4040 and it's great!!
I have the update package from 05.10.2012 the to ver 27.10.2012 its an update.zip
pm if anyone want to play with it
and i was able to get firmware
V2.3.012.P1.120827.PAP4000.zip if anyone need
has this phone scheduled power onn and off ??
can anybody please check menu if this function is present ?
thanx
A.
adam.sida said:
can anybody please check menu if this function is present ?
thanx
A.
Click to expand...
Click to collapse
It have
WRaven512 said:
What function ?
Click to expand...
Click to collapse
this function simply powers off phone at specified time and then back power on at specified time.
It is somehow like real power off, because phone is fully inactive (dont react), but if alarm is setup phone wakes up to run it... so it is probably some very deep sleep state of ARM CPU....
I use this function on my BLU studio 5.3 and I power off my phone at 22:30 and power on at 5:30 daily...it is just one of setting in phone setiings menu... very nice very usefull
way to root
http://forum.xda-developers.com/showthread.php?t=1594998
but latest version needed
mine have just arrived today, it looks good, runs good.
Concerning root this also may be of help http://forum.xda-developers.com/showthread.php?t=1886460
There is a bug is firmware cpu of the phone runs at 1000 all the time
root+setcpu alows to set ondemand and 500 as a lower settings
Root!
WRaven512 said:
There is a bug is firmware cpu of the phone runs at 1000 all the time
root+setcpu alows to set ondemand and 500 as a lower settings
Click to expand...
Click to collapse
is the root for 4300 the same for 4040? if so is it safe to root by the link provided by this page or not?
(Concerning root this also may be of help http://forum.xda-developers.com/show....php?t=1886460)
outlawman007 said:
is the root for 4300 the same for 4040? if so is it safe to root by the link provided by this page or not?
(Concerning root this also may be of help http://forum.xda-developers.com/show....php?t=1886460)
Click to expand...
Click to collapse
Maybe.
Solution to the problem with low sound with headphones is here
http://forum.xda-developers.com/showthread.php?t=1952154
i did it manually and it works fine
after last update in 4040 I cant make a panorama pic does anyone have this issue ?
I've got this phone. Rooted with MT6575-6577 ROOT tool. Was a bit pain in the ass, but everything went well. The phone WIPES DATA/CACHE (not user data). Can't find custom recovery for this phone, though
Is it Dual SIM ?
same
WRaven512 said:
after last update in 4040 I cant make a panorama pic does anyone have this issue ?
Click to expand...
Click to collapse
same here, the rectangle get's stuck....
can anyone describe how to root the device? is it the same for 4040 as for 4300 i know they have the same specs, but root could brick my phone, so i want to know from a user of 4040 how to root my phone, thanx
MagicMaster said:
Is it Dual SIM ?
Click to expand...
Click to collapse
It is Dual SIM, but only 1 SIM card is able to provide data connection (1st slot).
Also there is a bug in current firmwarte which sometimes caused phone to loose signal when roaming betweem BTSes, only solution to regain is reboot (fligh mode does not resovle it).
According to Prestigio fix is under development.
Was someone able to install GTalk on this phone ? Mine lack the app and i had no luck trying to install it (no root/no custom recovery).
EDIT: Update to 1.0.08 via OTA was not received, als the ones which should have been done by recovery menu was not successful.
After update to 1.0.08 via flashing program (a bit complicated) and then OTA to 1.0.09 now the GTalk works when downloaded the version for ICS.
Updates can be found here: http://yf2.value4it.com/Service_Files/Smartphones/PAP4300/
P.S.: Also by the folder structure it looks like there will be Prestigio Multiphone 4500 and 5000.
http://www.prestigio.com/products/Smartphones/MultiPhone/MultiPhone_4500_DUO
http://www.prestigio.com/products/Smartphones/MultiPhone/MultiPhone_5000_DUO
What cool things can i do on it now? i know it probably doesn't support any custom roms or cwm recovery, but what can i do to make the most of my new root?
Craig CMP756
Android 4.1.1
ARM v7 1.6GHz Dual core
in settings the kernel says:
3.0.8-gbe0089e-dirty
i have already gotten Linux working through Complete linux installer, now what?
tlmmrbstro said:
What cool things can i do on it now? i know it probably doesn't support any custom roms or cwm recovery, but what can i do to make the most of my new root?
Craig CMP756
Android 4.1.1
ARM v7 1.6GHz Dual core
in settings the kernel says:
3.0.8-gbe0089e-dirty
i have already gotten Linux working through Complete linux installer, now what?
Click to expand...
Click to collapse
its possible you could overclock it if 1.6 is not enough for you, performance control would be the best bet, it has Governors and I/o schedulers on it so you can get better battery if you need. titanium backup for uninstalling bloatware, cleanmaster with root clears out even more, i would also check out xposed framework if you want to mess around with all the options in there, i see that its Jellybean so i would recommend Gravitybox, tons of tweaks there i love to make all my stuff transparent xD
Trozzul said:
i see that its Jellybean so i would recommend Gravitybox, tons of tweaks there i love to make all my stuff transparent xD
Click to expand...
Click to collapse
In the Prerequisites of the app it says
Code:
- You have working custom recovery allowing you to make a backup before installing Xposed framework
^But im not sure if my device supports a custom recovery. how do i tell? and what are the risks? if it isn't compatible can i brick it?
tlmmrbstro said:
In the Prerequisites of the app it says
Code:
- You have working custom recovery allowing you to make a backup before installing Xposed framework
^But im not sure if my device supports a custom recovery. how do i tell? and what are the risks? if it isn't compatible can i brick it?
Click to expand...
Click to collapse
oh i did not see that, uh if there is no recovery then i guess i would not install it.
Trozzul said:
oh i did not see that, uh if there is no recovery then i guess i would not install it.
Click to expand...
Click to collapse
so whats the risk in trying to put a custom recovery/bootloader on the tablet? can it mess up beyond repair?
tlmmrbstro said:
so whats the risk in trying to put a custom recovery/bootloader on the tablet? can it mess up beyond repair?
Click to expand...
Click to collapse
its possible if you dont know what your doing, i looked it up and i dont see any custom recoverys for the device sorry and a bootloader is a whole different thing
Craig CMP756
Hi, I am interested in rooting my Craig cmp756 tablet. I am wondering how you managed? Windows or linux? i cant seem to get my pc to recognize the device in usb debugging mode. I would love to help you get the most out of your root if you could please share your method! thank a lot! - Joshua
haroman145 said:
Hi, I am interested in rooting my Craig cmp756 tablet. I am wondering how you managed? Windows or linux? i cant seem to get my pc to recognize the device in usb debugging mode. I would love to help you get the most out of your root if you could please share your method! thank a lot! - Joshua
Click to expand...
Click to collapse
have you downloaded android adb drivers? that would probably fix it.
I believe the universal driver works for this tablet. Just had someone ask me about it. Seemed to work for them.
If all else fails try Google.
Hi guys.
I am on CM13, I download a CWM apk and accidentally pressed fix permission. Now no matter how I clean install a rom or format and using a kernel I am still unable to run to at normal speed.
I tried using Root browser, Currently Min is 300000 and max is 1190400.
I have tried using different apks to change governor and speed, but it still doesn't work.
please help me.
Pics are below. A few topics below.
exige said:
Hi guys.
I am on CM13, I download a CWM apk and accidentally pressed fix permission. Now no matter how I clean install a rom or format and using a kernel I am still unable to run to at normal speed.
I tried using Root browser, Currently Min is 300000 and max is 1190400.
I have tried using different apks to change governor and speed, but it still doesn't work.
please help me.
Click to expand...
Click to collapse
If clean flashing the rom and flashing a new kernel doesn't work, you could flash the factory images again. It's a last resort but guaranteed to fix anything and everything bar hardware stuff.
I tried the hammerhead restore to stock rom. It didn't work. Are there others i do not know of?
exige said:
I tried the hammerhead restore to stock rom. It didn't work. Are there others i do not know of?
Click to expand...
Click to collapse
I'm not exactly sure what you meant by "hammerhead restore to stock rom" but what I meant was flashing the images from here > https://developers.google.com/android/images
pingu11 said:
I'm not exactly sure what you meant by "hammerhead restore to stock rom" but what I meant was flashing the images from here > https://developers.google.com/android/images
Click to expand...
Click to collapse
Thank you so much for the link. I tried TWRP file system fix. I hope it works.
mpdesicion manages max clock for you, you are just checking max clock when all 4 cores are running
GR0S said:
mpdesicion manages max clock for you, you are just checking max clock when all 4 cores are running
Click to expand...
Click to collapse
Hi I have done a factory rom install as suggested. It didn't work. Now I am back on CM13 lastest snapshot.
I cannot move above 1190mhz and also I cannot change the governor.
Kindly see the attached pic. I tried stopping the mpdecision also and same result.
I hope Someone could help me out. Thank you.
exige said:
Thank you so much for the link. I tried TWRP file system fix. I hope it works.
Click to expand...
Click to collapse
I have no idea what the file system fix does to be honest. Did you flash all partitions again?
pingu11 said:
I have no idea what the file system fix does to be honest. Did you flash all partitions again?
Click to expand...
Click to collapse
Yes i have. I done all formats.
Try sliding the Thermal slider all the way to the right side. It worked for me, because i believe there is some kind of heat detector sort of thing and after triggering it lowers the cpu freq till the phone cools down
Hello guys I am not a dev or anything, just found these drivers in the other forum threads and thought i'd put them here for us GT neo 2 users, it increases your perf up to 20% since we have drivers from way back in 2020 .....
package includes openGL and VUlkan, must be installed with magisk and preferably also have the magisk overlayFS module before installing. make a copy of your system before trying.
[email protected][email protected] is the one with both openGL and vulkan, the one I used which seems to be the most compatible and stable, i think the other one is the same but contains some modules.
I also used konabess to slightly overclock and undervolt the GPU since its locked but it uses more power than the compute output gives so it runs cooler at maximum boost.
the driver i found earlier was from a poco f3 thread which i cant find now, but i found the same driver here.
any problems or troubleshootings i cant help you with! also join the telegram group Adreno GPUS & KonaBess Support Group for all the latest snapdragon drivers, highly experimental !
here is the thread https://forum.xda-developers.com/t/...h-gpu-overclock.4381017/page-10#post-86693965
edit: link was fixed
NOTE: our adreno 870 chipset is most probably LOCKED so you cant go beyond 680 mhz. I tried it myself and i got bootloop only, the POCO F3 konabess config I am using now.
Cheers!
new note:
Looks like the 611 driver breaks compatability with 3dmark, but antutu still works here is a new run.
still recommend running 604 opengl and 530 vulkan drivers
What things do i exactly need to do?
Do I just need to flash the magisk overflays and then flash the driver or i need to flash both the systemwr and overflays and then the driver?
Ian94y said:
What things do i exactly need to do?
Do I just need to flash the magisk overflays and then flash the driver or i need to flash both the systemwr and overflays and then the driver?
Click to expand...
Click to collapse
yes simply flash overlays and then driver. However, earlier I only flashed the driver in magisk and it seemed to work too, maybe overlays is for newer drivers
Chrisdorum said:
yes simply flash overlays and then driver. However, earlier I only flashed the driver in magisk and it seemed to work too, maybe overlays is for newer drivers
Click to expand...
Click to collapse
Okay,I'll try it later.
Thanks for replying!
So i tried to flash the TWRP flashable drivers, and i came to the conclusion that at the moment systemWR flash is broken so we have only the overlays method until anyone updates it.
3dmark and antutus runs fine again but no more increased vulkan perf, but slightly increased openGL perf from previous driver. Looks like this will be the newest stable driver we can use
Can i know what program do you use to overclock the gpu?
Ian94y said:
Can i know what program do you use to overclock the gpu?
Click to expand...
Click to collapse
I used this app https://github.com/libxzr/KonaBess?msclkid=e74196a0cd5411ec8108205d1cb4fdad
make a recovery backup first. then use TWRP to flash the recovery part if it bootloops
and i am using this config :
Chrisdorum said:
I used this app https://github.com/libxzr/KonaBess?msclkid=e74196a0cd5411ec8108205d1cb4fdad
make a recovery backup first. then use TWRP to flash the recovery part if it bootloops
and i am using this config :
Click to expand...
Click to collapse
I used the config driectly and my phone poped out boot or recovery is broken,it almost freaked me out but i backuped the boot so it's fine now.
Is there any settings or something i need to do before flashing the overclock image?
Ian94y said:
I used the config driectly and my phone poped out boot or recovery is broken,it almost freaked me out but i backuped the boot so it's fine now.
Is there any settings or something i need to do before flashing the overclock image?
Click to expand...
Click to collapse
Oh damn that's why we backup luckily it only takes a min to restore the boot. Hmm maybe i linked the wrong one, i was on my PC, but i exported the settings I'm using right now. I'm pretty sure it should work
Chrisdorum said:
Oh damn that's why we backup luckily it only takes a min to restore the boot. Hmm maybe i linked the wrong one, i was on my PC, but i exported the settings I'm using right now. I'm pretty sure it should work
Click to expand...
Click to collapse
Hmm... it still has the same problem, maybe i did something wrong or there are some settings i need to do in twrp.
I think i'll just use the app I am using right now which called smartpack kernel manager to only set freq to 670mhz without undervolting.
I think 680mhz maybe wont effect much ,so i just keep it that way cuz if my phone bricked, my mom will kill me xD
So my final result is 3dmark wild life from original driver 4130 score to sm8250_v614_overlayfs_v2 4450~4560score,and that's very much for me!
Thanks for the tutorial and if there are more updates, I'll keep following ,keep up the good work!
Ian94y said:
Hmm... it still has the same problem, maybe i did something wrong or there are some settings i need to do in twrp.
I think i'll just use the app I am using right now which called smartpack kernel manager to only set freq to 670mhz without undervolting.
I think 680mhz maybe wont effect much ,so i just keep it that way cuz if my phone bricked, my mom will kill me xD
So my final result is 3dmark wild life from original driver 4130 score to sm8250_v614_overlayfs_v2 4450~4560score,and that's very much for me!
Thanks for the tutorial and if there are more updates, I'll keep following ,keep up the good work!
Click to expand...
Click to collapse
i'm sorry it didnt work! guess all chips are different, I would also be very happy with those results tbh, I will be driving with what i have so far. if i find something new and stable ill post some more