Prestigio multiphone 4300 duo - General Questions and Answers

anyone has it?

lol nobody?
http://www.prestigio.com/products/Smartphones/MultiPhone

kmetek said:
lol nobody?
http://www.prestigio.com/products/Smartphones/MultiPhone
Click to expand...
Click to collapse
Going to have mine in a few days. It looks like a decent phone for a little money. Rooting it (if it wont come prerooted) will probably will not possible in a near future.

I have 4040 it is basically same model
sound on mp3 is very low
camera have 8mp not 5
gps is very inaccurate but after some time (4 min) i get the location bu it is still about 50-100 incorect
but it is still a very decent phone it is not rooted need to figure out a way
there is a recovery and factory mode
recovery mode have a install update from sd card option
vipe dalvik/ cache
backup and restore user data
factory mode is for tests
Android System recovery <3e>

i too have 4040 and it's great!!

I have the update package from 05.10.2012 the to ver 27.10.2012 its an update.zip
pm if anyone want to play with it
and i was able to get firmware
V2.3.012.P1.120827.PAP4000.zip if anyone need

has this phone scheduled power onn and off ??
can anybody please check menu if this function is present ?
thanx
A.

adam.sida said:
can anybody please check menu if this function is present ?
thanx
A.
Click to expand...
Click to collapse
It have

WRaven512 said:
What function ?
Click to expand...
Click to collapse
this function simply powers off phone at specified time and then back power on at specified time.
It is somehow like real power off, because phone is fully inactive (dont react), but if alarm is setup phone wakes up to run it... so it is probably some very deep sleep state of ARM CPU....
I use this function on my BLU studio 5.3 and I power off my phone at 22:30 and power on at 5:30 daily...it is just one of setting in phone setiings menu... very nice very usefull

way to root
http://forum.xda-developers.com/showthread.php?t=1594998
but latest version needed

mine have just arrived today, it looks good, runs good.
Concerning root this also may be of help http://forum.xda-developers.com/showthread.php?t=1886460

There is a bug is firmware cpu of the phone runs at 1000 all the time
root+setcpu alows to set ondemand and 500 as a lower settings

Root!
WRaven512 said:
There is a bug is firmware cpu of the phone runs at 1000 all the time
root+setcpu alows to set ondemand and 500 as a lower settings
Click to expand...
Click to collapse
is the root for 4300 the same for 4040? if so is it safe to root by the link provided by this page or not?
(Concerning root this also may be of help http://forum.xda-developers.com/show....php?t=1886460)

outlawman007 said:
is the root for 4300 the same for 4040? if so is it safe to root by the link provided by this page or not?
(Concerning root this also may be of help http://forum.xda-developers.com/show....php?t=1886460)
Click to expand...
Click to collapse
Maybe.
Solution to the problem with low sound with headphones is here
http://forum.xda-developers.com/showthread.php?t=1952154
i did it manually and it works fine

after last update in 4040 I cant make a panorama pic does anyone have this issue ?

I've got this phone. Rooted with MT6575-6577 ROOT tool. Was a bit pain in the ass, but everything went well. The phone WIPES DATA/CACHE (not user data). Can't find custom recovery for this phone, though

Is it Dual SIM ?

same
WRaven512 said:
after last update in 4040 I cant make a panorama pic does anyone have this issue ?
Click to expand...
Click to collapse
same here, the rectangle get's stuck....
can anyone describe how to root the device? is it the same for 4040 as for 4300 i know they have the same specs, but root could brick my phone, so i want to know from a user of 4040 how to root my phone, thanx

MagicMaster said:
Is it Dual SIM ?
Click to expand...
Click to collapse
It is Dual SIM, but only 1 SIM card is able to provide data connection (1st slot).
Also there is a bug in current firmwarte which sometimes caused phone to loose signal when roaming betweem BTSes, only solution to regain is reboot (fligh mode does not resovle it).
According to Prestigio fix is under development.

Was someone able to install GTalk on this phone ? Mine lack the app and i had no luck trying to install it (no root/no custom recovery).
EDIT: Update to 1.0.08 via OTA was not received, als the ones which should have been done by recovery menu was not successful.
After update to 1.0.08 via flashing program (a bit complicated) and then OTA to 1.0.09 now the GTalk works when downloaded the version for ICS.
Updates can be found here: http://yf2.value4it.com/Service_Files/Smartphones/PAP4300/
P.S.: Also by the folder structure it looks like there will be Prestigio Multiphone 4500 and 5000.
http://www.prestigio.com/products/Smartphones/MultiPhone/MultiPhone_4500_DUO
http://www.prestigio.com/products/Smartphones/MultiPhone/MultiPhone_5000_DUO

Related

What's App issue on i9003

I get whats app messages only after unlocking my phone.If there has been no whatsapp messages for a long time and my phone was locked and some 1 sends me a message I recieve it only after unlocking my phone.This happens only on GPRS.On WiFi I dont face this problem.Does GPRS time out after sometime?If yes,Is there a way to stop it from timing out.I DO NOT use any battery saver apps that cut the GPRS Packet data when the phone is locked.
Firmware -Latest DDKP3
Thanks in advance.
Flash xda bam's latest kernel and see if it helps
Cheers
Sent from my GT-i9003 powered by MIUI
bscraze said:
Flash xda bam's latest kernel and see if it helps
Cheers
Sent from my GT-i9003 powered by MIUI
Click to expand...
Click to collapse
Thanks for the reply. Im from India can i still flash with the Rom you suggested me? If i flash will i be able to connect to Kies. Sorry for the noobish questions. Thanks
sl4y3r88 said:
Thanks for the reply. Im from India can i still flash with the Rom you suggested me? If i flash will i be able to connect to Kies. Sorry for the noobish questions. Thanks
Click to expand...
Click to collapse
It's not a Rom bro, its a kernel, your Rom will still be stock, and yes Kies will still detect it, but be aware that your warranty will be void once you root your phone (comes included with the kernel) but you can always revert back to the stock rom easily.
sl4y3r88 said:
I get whats app messages only after unlocking my phone.If there has been no whatsapp messages for a long time and my phone was locked and some 1 sends me a message I recieve it only after unlocking my phone.This happens only on GPRS.On WiFi I dont face this problem.Does GPRS time out after sometime?If yes,Is there a way to stop it from timing out.I DO NOT use any battery saver apps that cut the GPRS Packet data when the phone is locked.
Firmware -Latest DDKP3
Thanks in advance.
Click to expand...
Click to collapse
my wife phone's has the same issue
mzone1510 said:
It's not a Rom bro, its a kernel, your Rom will still be stock, and yes Kies will still detect it, but be aware that your warranty will be void once you root your phone (comes included with the kernel) but you can always revert back to the stock rom easily.
Click to expand...
Click to collapse
Thanks for the info Buddy. Could you be kind enough to post the link with the. Procedure how to flash. Thanks again.
Here you go. follow the instructions on the following link. Cheers!
http://forum.xda-developers.com/showthread.php?t=1355675
are u installing juice defender?
neutronz said:
are u installing juice defender?
Click to expand...
Click to collapse
Nope, no juice defender nor any battery saving app as i earlier mentioned.
Guys thanks for the help,Im a Technically sound guy,ON COMPUTERS, Cellphones not really my domain.The link hellismine89 posted spoke about CPU overclocking and high end stuff.All I want is a Guide to make my phone
P.S Please give the best option for an Indian/Asian device
1.Run smooth
2.Rooted
3.As close to stock as possibe witha chance to get to the 100% official rom as given by Samsung.
4.Rooted device should be detected by Kies.
Thanks A lot guys and sorry for being a pain in the ass.
sl4y3r88 said:
Guys thanks for the help,Im a Technically sound guy,ON COMPUTERS, Cellphones not really my domain.The link hellismine89 posted spoke about CPU overclocking and high end stuff.All I want is a Guide to make my phone
P.S Please give the best option for an Indian/Asian device
1.Run smooth
2.Rooted
3.As close to stock as possibe witha chance to get to the 100% official rom as given by Samsung.
4.Rooted device should be detected by Kies.
Thanks A lot guys and sorry for being a pain in the ass.
Click to expand...
Click to collapse
Its simple,
Download the kernel 'PDA_BCK_CF-root_universal_beta10.tar' as posted in the link hellismine89 posted.
Download Odin (google it, should be easy enough to find)
Get your phone into 'Download' mode. for that, switch your phone off, and turn it on again while holding the middle button and volume down key.
Open odin, and under PDA select the kernel file you had downloaded earlier. Make sure that 'PHONE EFS CLEAR' is UNchecked! Do not check it! *VERY IMP* or you will lose your IMEI.
Just click on 'start' THAT IS ALL!
mzone1510 said:
Its simple,
Download the kernel 'PDA_BCK_CF-root_universal_beta10.tar' as posted in the link hellismine89 posted.
Download Odin (google it, should be easy enough to find)
Get your phone into 'Download' mode. for that, switch your phone off, and turn it on again while holding the middle button and volume down key.
Open odin, and under PDA select the kernel file you had downloaded earlier. Make sure that 'PHONE EFS CLEAR' is UNchecked! Do not check it! *VERY IMP* or you will lose your IMEI.
Just click on 'start' THAT IS ALL!
Click to expand...
Click to collapse
That's what i needed.Thanks Bro.Im assuming I can get my phone to stock settings if I ever wanted to.
Can some 1 tell me the difference between the files in this link
http://forum.xda-developers.com/showthread.php?t=1331253
and the Bam Kernal thing that hellismine89 posted?
sl4y3r88 said:
Can some 1 tell me the difference between the files in this link
http://forum.xda-developers.com/showthread.php?t=1331253
and the Bam Kernal thing that hellismine89 posted?
Click to expand...
Click to collapse
What you have posted is CF-ROOT which basically 'Roots' your phone and gives some tweaks and recovery etc, Bam's kernel is the ONLY one with the sync bug fixed and also comes with CF root... So Just flash Bam's kernel & you will be happy.
Hi Please see the screenshot of Odin Are the right items checked or do I need to check/Uncheck any. I wont Check the EFS option ;-) Version 1.85 is what I got from this forum.Il be using this to flash with Bams Kernel.Should I backup my contacts and calendar on Kies or use some app?Id like to use Kies.
This is the one il be downloading - PDA_BCK_CF-root_universal_beta11.tar - [Click for QR Code] (7.58 MB, 58 views) - correct? just 7 MB ?
or should I be using this ? PDA_BCK_XXKPQ_beta11.tar - [Click for QR Code] (5.75 MB, 27 views)
Is the phone going to be overcloked when I use these?
Thanks so much for the prompt replies by all,Really appreciate it.
sl4y3r88 said:
Hi Please see the screenshot of Odin Are the right items checked or do I need to check/Uncheck any. I wont Check the EFS option ;-) Version 1.85 is what I got from this forum.Il be using this to flash with Bams Kernel.Should I backup my contacts and calendar on Kies or use some app?Id like to use Kies.
This is the one il be downloading - PDA_BCK_CF-root_universal_beta11.tar - [Click for QR Code] (7.58 MB, 58 views) - correct? just 7 MB ?
or should I be using this ? PDA_BCK_XXKPQ_beta11.tar - [Click for QR Code] (5.75 MB, 27 views)
Is the phone going to be overcloked when I use these?
Thanks so much for the prompt replies by all,Really appreciate it.
Click to expand...
Click to collapse
Yes my friend, all looks good, You can use either one, only difference is one comes packaged with cf root the other is without, go with the above one as you don't have to go rooting all over again.
Regarding overclock, your phone will have the capability to be overclocked, but you can choose whether you want it to be or not, just install 'no frills cpu control' from the market and select your clock speed to 1000 (stock).
Generally there is no need for a backup but, it never hurts! If you get stuck on the boot screen after flashing, don't panic, just get into recovery mode (vol up+home button+power button) and clear cache and davlik cache.
mzone1510 said:
Yes my friend, all looks good, You can use either one, only difference is one comes packaged with cf root the other is without, go with the above one as you don't have to go rooting all over again.
Regarding overclock, your phone will have the capability to be overclocked, but you can choose whether you want it to be or not, just install 'no frills cpu control' from the market and select your clock speed to 1000 (stock).
Generally there is no need for a backup but, it never hurts! If you get stuck on the boot screen after flashing, don't panic, just get into recovery mode (vol up+home button+power button) and clear cache and davlik cache.
Click to expand...
Click to collapse
Hey mzone1510 what kernel are you using? I want to use the above one with the built-in CF root but the guy who has posted it says its not recommended.. and its not tested and stuff like that.I cant afford to brick this phone at ANY cost,hope that tells you why im asking 1 million questions.Thanks for being so patient.I'm currently on the latest DDKP3.Also if I do not download the no frills app will the phone be overclocked by default after I update the Kernel ?
sl4y3r88 said:
Hey mzone1510 what kernel are you using? I want to use the above one with the built-in CF root but the guy who has posted it says its not recommended.. and its not tested and stuff like that.I cant afford to brick this phone at ANY cost,hope that tells you why im asking 1 million questions.Thanks for being so patient.I'm currently on the latest DDKP3.Also if I do not download the no frills app will the phone be overclocked by default after I update the Kernel ?
Click to expand...
Click to collapse
It will only be a soft brick which can be fixed easily. . Trust me with this flashing stuff, I always have a backup and a efs backup too.
Cheers
Sent from my GT-i9003 powered by MIUI
sl4y3r88 said:
Hey mzone1510 what kernel are you using? I want to use the above one with the built-in CF root but the guy who has posted it says its not recommended.. and its not tested and stuff like that.I cant afford to brick this phone at ANY cost,hope that tells you why im asking 1 million questions.Thanks for being so patient.I'm currently on the latest DDKP3.Also if I do not download the no frills app will the phone be overclocked by default after I update the Kernel ?
Click to expand...
Click to collapse
I am on DDKP3 & using Bam's kernel beta 10 with cf root. Don't worry about the version with cf root, it works fine,no problems at all, and your phone will not get bricked that easily, just remember the efs thing though! Regarding overclocking I think bam has mentioned that it boots at 1000 (stock) by default but runs at 1200 for 5 secs or so. SO its not really a big deal, but its good to have no frills just to be sure.
mzone1510 said:
I am on DDKP3 & using Bam's kernel beta 10 with cf root. Don't worry about the version with cf root, it works fine,no problems at all, and your phone will not get bricked that easily, just remember the efs thing though! Regarding overclocking I think bam has mentioned that it boots at 1000 (stock) by default but runs at 1200 for 5 secs or so. SO its not really a big deal, but its good to have no frills just to be sure.
Click to expand...
Click to collapse
Cool so I will just stay with the beta 10 with CF root just like you ,I know 11 is newer but since the dev himself doesnt use it and says its untested I'd feel safer to be with a know and used release.Thanks a ton guys!

S4 Clone gt-i9500 Delete Apps

Hello My friend, My brother Offred me new Galaxy S4 GT-I9500 snd unfortuly he was puncked and he buyed Cloned one, and we can't get it back, So I'm wondring if there's any solution to delete all those crappy chinise app or Install Android 4.2.2 Europeen or English version .
It's so bad To be noobie and you don't make differance between Fake and Original Phone.
Click to expand...
Click to collapse
chlebta said:
Hello My friend, My brother Offred me new Galaxy S4 GT-I9500 snd unfortuly he was puncked and he buyed Cloned one, and we can't get it back, So I'm wondring if there's any solution to delete all those crappy chinise app or Install Android 4.2.2 Europeen or English version .
Click to expand...
Click to collapse
I can most likely help but I will need you to install antutu benchmark or another application that will tell you the hardware in phone. If it is a MT65xx processor then I know how you can root and Uninstall Chinese apps.
Hope this helps!
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Klown80 said:
I can most likely help but I will need you to install antutu benchmark or another application that will tell you the hardware in phone. If it is a MT65xx processor then I know how you can root and Uninstall Chinese apps.
Hope this helps!
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
My benchMark score is 4952 .
Take Look And tell me
I can't link before 10 messages.
SO , go on youtube and write "How to root android smartphones - one click apps - Android 4.2 supported - Chinese phones"
chlebta said:
My benchMark score is 4952 .
Take Look And tell me
Click to expand...
Click to collapse
Looking at that info, it almost looks like you have a real Galaxy S4, you just have one with Chinese firmware on it. Does this info match your devices info:
http://forum.xda-developers.com/showthread.php?t=2249916
Can you power off the phone and then press and hold Vol Down + Home + Power? Does this take you to a warning screen saying you are about to enter download mode? If so then you do indeed have the real deal, but I think it is a clone.
I see some info that looks funny though, it says your OS is built from the 4.0.3 SDK and you have an ICS kernel in there even though it says you are on 4.2.2, It also only shows you having 500MB of internal storage compared to the 9GB on my S4 if you cant get phone into download mode then I would suggest trying to run Motochopper or Root By Restore to get rooted.
Klown80 said:
Looking at that info, it almost looks like you have a real Galaxy S4, you just have one with Chinese firmware on it. Does this info match your devices info:
http://forum.xda-developers.com/showthread.php?t=2249916
Can you power off the phone and then press and hold Vol Down + Home + Power? Does this take you to a warning screen saying you are about to enter download mode? If so then you do indeed have the real deal, but I think it is a clone.
I see some info that looks funny though, it says your OS is built from the 4.0.3 SDK and you have an ICS kernel in there even though it says you are on 4.2.2, It also only shows you having 500MB of internal storage compared to the 9GB on my S4 if you cant get phone into download mode then I would suggest trying to run Motochopper or Root By Restore to get rooted.
Click to expand...
Click to collapse
I can't get into Download Mode, I tried All Solution except USB jig, and always my phone start normal or into recovery mode .
take Look on pictures :
chlebta said:
I can't get into Download Mode, I tried All Solution except USB jig, and always my phone start normal or into recovery mode .
take Look on pictures :
Click to expand...
Click to collapse
Yeah, that is for sure a clone then! How about trying this tool? I have used it with success on a few chinese clone phones:
http://forum.xda-developers.com/showpost.php?p=43163569&postcount=7
Klown80 said:
Looking at that info, it almost looks like you have a real Galaxy S4, you just have one with Chinese firmware on it. Does this info match your devices info:
http://forum.xda-developers.com/showthread.php?t=2249916
Can you power off the phone and then press and hold Vol Down + Home + Power? Does this take you to a warning screen saying you are about to enter download mode? If so then you do indeed have the real deal, but I think it is a clone.
I see some info that looks funny though, it says your OS is built from the 4.0.3 SDK and you have an ICS kernel in there even though it says you are on 4.2.2, It also only shows you having 500MB of internal storage compared to the 9GB on my S4 if you cant get phone into download mode then I would suggest trying to run Motochopper or Root By Restore to get rooted.
Click to expand...
Click to collapse
Klown80 said:
Yeah, that is for sure a clone then! How about trying this tool? I have used it with success on a few chinese clone phones:
http://forum.xda-developers.com/showpost.php?p=43163569&postcount=7
Click to expand...
Click to collapse
I have rooted my Phone using Motochopper I'm wondering if there's any way to install android 4.2.2 English version on it ??
chlebta said:
I have rooted my Phone using Motochopper I'm wondering if there's any way to install android 4.2.2 English version on it ??
Click to expand...
Click to collapse
Are you not able to go into Settings and change languages? I have bought a few clone phones directly from china and they usually came with english on them but when I reset them they would revert back to chinese and I would have to go into settings and change back to english. I can help guide you through the menus if your menu is in chinese.
As far as roms go, you would most likely either have to find someone with same device that ported a rom over or port it yourself if you know how. Only other option is if there is a forum that supports your specific device.
FYI - to help make looking for a rom a bit easier you have a MT6575 device
Klown80 said:
Are you not able to go into Settings and change languages? I have bought a few clone phones directly from china and they usually came with english on them but when I reset them they would revert back to chinese and I would have to go into settings and change back to english. I can help guide you through the menus if your menu is in chinese.
As far as roms go, you would most likely either have to find someone with same device that ported a rom over or port it yourself if you know how. Only other option is if there is a forum that supports your specific device.
FYI - to help make looking for a rom a bit easier you have a MT6575 device
Click to expand...
Click to collapse
I have tried to root My phone with root with restor and motochopper it the CMD it show me that devices was succefully rooted but when i open SuperSu or SuperUser it tell me that Binary su need to be updated and trying to updating Fail always waht's the problem here?
chlebta said:
I have tried to root My phone with root with restor and motochopper it the CMD it show me that devices was succefully rooted but when i open SuperSu or SuperUser it tell me that Binary su need to be updated and trying to updating Fail always waht's the problem here?
Click to expand...
Click to collapse
Uninstall SuperSU and superuser then try running Motochopper again. If it still don't work, try the chinese root program I linked above. If it fails to let you update su binary then it most likely failed to root your device. If the chinese root program don't work either I still know of another option since you have a MT6575 processor
Klown80 said:
Uninstall SuperSU and superuser then try running Motochopper again. If it still don't work, try the chinese root program I linked above. If it fails to let you update su binary then it most likely failed to root your device. If the chinese root program don't work either I still know of another option since you have a MT6575 processor
Click to expand...
Click to collapse
it's Mt6575, And i have tried Delete SuperSu then rooting again but havn't worked
chlebta said:
it's Mt6575, And i have tried Delete SuperSu then rooting again but havn't worked
Click to expand...
Click to collapse
Try the chinese tool I posted back in post #7, it works on a number of MT6575 devices...
Hello guys!
Well, maybe I'm here not for the topic but can anybody who has the S4 clone give me WiFiDisplay.apk from /system/app
Thanks.
i9500 clone cant move or delete an homescreens or homesreen apps
I purchased the clone i9500 s4 and i cant delete any home screens, i press and hold to drag and nothing happens. some times the trash can appears but then the app wont move. i talked to the seller and he know it was like that but gave me no solutions. Ive even tried theme launchers and im sill having problems with the drag app function and deltet. please help!
Problem with clone SAMSUNG S4 GT-I9500
Hello there! Please who can help me with these problems that i have. When i call a contact number or when they call me , even though i set up a photo in Gallery as contact photo , nothing appear when they call me..
and the second problem that is bothering me is the fact that , it always vibrates when i touch back and menu buttons even though i ahve disabled touch vibration on : settings--my device--audio profiles--general --vibrate on touch ( close) ...
Anyone could help me resolving this issue?

[GUIDE] Rooting your Huawei Ascend Mate

Hi Folks,
we at the Recieved my Huawei Ascend Mate Threat thought of make it easier for future or new HAM users to root their phone.
For that i reread the whole Threat and extracted the various mentioned rooting options.
IMPORTANT!
Rooting with any of the mentioned methods obviously voids your warranty.
I think that everybody knows this by now, but I'm not responsible if something goes wrong
Having said these standard stuff lets kick off!
First I start with the Method I used and many others, and i think this is the simples rooting method i ever came across.
The easiest is Rooting your HAM with eRoot
1) Get the eRoot Programm from Version 1.2 <- This Works till B221
1.1) For Higher Firmware Versions, like the new B905 use eRoot Version 1.3.4
2) Dig in your phone and enable usb debugging in developer options and in security enable unknown origin
3) Hook up your phone the your rig and on ask select MTP mode and install the Huawei HiSuite (phone drivers )
4) fire up eroot and let it find your phone, if it does hit root ...
5) reboot and that should be it
Confirmed to work on multiple Build Stages of the Stock Rom which currently is sporting version B221
Be aware that if your phone is bone stock you should firstly update the phones software to the newest possible version ...
-> B221 before rooting, otherwise it can cause problems
Second Rooting Method mentioned by PowerMan572
Detailed Instructions Here
i believe syaah used successfully this method
Third Method
theoppositeman
said:
https://www.dropbox.com/s/2iuhai9fmmlv8ta/MATE_ROOT.zip
this folder contains the rooting guide and app including the RootAssisstant v2.0. easy method of rooting and can be use for both chinese firmware and international firmware regardless of rom versions. rootassisstant v2.0 is in chinese but no need to worry as we need only to click one box in it. superuser is stable and can be updated in google play. hopefully can help as this is the first and stable method all the suppliers of HAM in China use and provided to their customers.
Click to expand...
Click to collapse
Fourth Method
kerlchen27 said:
Detailed instructions in german
http://www.android-hilfe.de/huawei-...28-how-huawei-ascend-mate-root-anleitung.html
Click to expand...
Click to collapse
Fifth Method
oneguyks said:
Download drivers for the phone and install it on the computer
https://www.dropbox.com/s/4qoacn4hqqw9h5v/WinDriver.exe
Then download this Chinese rom
http://jiyouhui.it168.com/thread-28315-1-1.html
Unzip the room. Put the phone in debugging mode, hook it to the computer with USB, and click on .bat file ... that's all.
Click to expand...
Click to collapse
Sixth Method
cmas84 said:
Mentioned by cmas84 a little tool called [Framaroot]
Version 1.6.0 Supports K3V2 Handsets, ergo the HAM
Click to expand...
Click to collapse
-> We havent confirmed it yet, but give it a go, it's a simple one klick method, everything is in the Threat:good:
That should be all methods, again all methods seem to work, but i found eroot to be the easiest, basically hook it up and press one button.:victory:
Hope i could help a few new HAM users out
Cheers :highfive:
If i root my HAM wil i lose my warranty
nedius004 said:
If i root my HAM wil i lose my warranty
Click to expand...
Click to collapse
Most of the time yes, but it really depends on which carrier you are (if you bought the phone with a contract) or where you bought it (which Store).
With eRoot you can if you rootet it with it, unroot your phone again.
Thank u very much .. you put the juice in one cup ..
Much easier to find .. more threads to subscribe
Sent from my HUAWEI MT1-U06 using xda app-developers app
nedius004 said:
If i root my HAM wil i lose my warranty
Click to expand...
Click to collapse
In the manual itself stated thst. But no worry as HAM was one of the phone that can be rooted easily in minutes and yes u can always revert back when needed. Just dint forget to backup.
[email protected]
Onecton said:
With eRoot you can if you rootet it with it, unroot your phone again.
Click to expand...
Click to collapse
Thanks for the threat.
I'm about to root my HAM with Eroot, I have 3 questions before I do :
1. Any bizarre things happen after rooting with Eroot? Like FC? App missing? etc... (seen people having issues or not after rooting)
2. Would I be able to get OTA updates after rooting? What about a custon recovery? If I install CWM recovery, would I be able to apply OTA updates? If not, would unrooting the HAM allow me to OTA update my phone (then root again afterward)?
3. If something goes wrong while rooting, would I be able to install offcial B113 ROM from SD so I would go all fresh again like I first got the HAM out of the store?
Thanks for your advices.
Have a good one.
Cheers
beaubin said:
Thanks for the threat.
I'm about to root my HAM with Eroot, I have 3 questions before I do :
1. Any bizarre things happen after rooting with Eroot? Like FC? App missing? etc... (seen people having issues or not after rooting)
Click to expand...
Click to collapse
I didn't run into any funky issues. No FC's , no apps missing. Everything runs as it should.
beaubin said:
2. Would I be able to get OTA updates after rooting? What about a custon recovery? If I install CWM recovery, would I be able to apply OTA updates? If not, would unrooting the HAM allow me to OTA update my phone (then root again afterward)?
Click to expand...
Click to collapse
In some cases we heard in the big Threat Here That you run into trouble witth OTA and root. So we all suggest that the rooting process should be initiated after you upgraded to the desired Firmwareversion.
As im aware there is currently no "real" meaning permanent CWM Recovery present. Only a sideload Recovery, some features didn't work properly, but I assume they manage that.
OTA Updates: I think it's the easiest to unroot it with eRoot and then root it again after the OTA
beaubin said:
3. If something goes wrong while rooting, would I be able to install offcial B113 ROM from SD so I would go all fresh again like I first got the HAM out of the store?
Thanks for your advices.
Have a good one.
Cheers
Click to expand...
Click to collapse
I didn't heard of something going terribly wrong with eroot, but yes you can of course flash the full B113 from standard Recovery you need no custom recovery for that
Hope i could help :highfive:
Onecton said:
I didn't run into any funky issues. No FC's , no apps missing. Everything runs as it should.
In some cases we heard in the big Threat Here That you run into trouble witth OTA and root. So we all suggest that the rooting process should be initiated after you upgraded to the desired Firmwareversion.
As im aware there is currently no "real" meaning permanent CWM Recovery present. Only a sideload Recovery, some features didn't work properly, but I assume they manage that.
OTA Updates: I think it's the easiest to unroot it with eRoot and then root it again after the OTA
I didn't heard of something going terribly wrong with eroot, but yes you can of course flash the full B113 from standard Recovery you need no custom recovery for that
Hope i could help :highfive:
Click to expand...
Click to collapse
Thanks Onecton for all the inputs, really helpful !
One last question though, I downloaded Eroot v1.2 from the OP, proceeded as indicated, installed HiSuite, PC drivers etc., tried few times to plug my phone when Eroot told me to, but eachtime failed by getting "creating process failed" message, looked like Eroot couldn't recognize my phone... Oh, I'm on latest official OTA B221 FW.
So I went searching over the internet, found there was a Eroot v1.3.3, really not sure if it's official, cos there was (only) v1.2 official app from eroot.me (holy moly ! eroot.me website is gone !!! it's a online sim unlock codes site now ! What happened?), so, with this v1.3.3, it recognized my phone within a second.
Before I clic on that root button, just wanted to check with you experts if the Eroot v1.3.3 is legitimate, or is it some sort of fake app out there.
Thanks again !
Have a nice day.
Cheers
beaubin said:
Thanks Onecton for all the inputs, really helpful !
One last question though, I downloaded Eroot v1.2 from the OP, proceeded as indicated, installed HiSuite, PC drivers etc., tried few times to plug my phone when Eroot told me to, but eachtime failed by getting "creating process failed" message, looked like Eroot couldn't recognize my phone... Oh, I'm on latest official OTA B221 FW.
So I went searching over the internet, found there was a Eroot v1.3.3, really not sure if it's official, cos there was (only) v1.2 official app from eroot.me (holy moly ! eroot.me website is gone !!! it's a online sim unlock codes site now ! What happened?), so, with this v1.3.3, it recognized my phone within a second.
Before I clic on that root button, just wanted to check with you experts if the Eroot v1.3.3 is legitimate, or is it some sort of fake app out there.
Thanks again !
Have a nice day.
Cheers
Click to expand...
Click to collapse
Glad i can help mate :highfive:
Dafuq? eroot.me is gone? Thanks for the heads up, i will change the link accordingly and reroute the link to my dropbox.
Sorry for that
with eroot 1.2 i wasnt able to root too if i recall correctly.... i fired up the 1.2 version it immediately wanted to upgrade, or something. So i let it pull it's update and it worked like a breeze then.
Regarding your version, i really don't know if it is fake or not sorry but what i can say is that i'm fixing the link and it should be up and running again in approx. 4 min.
eRoot link is fixed :highfive:
if you can wait till there, you have most definately the ledigt version :highfive:
also i'm by far no expert and i don't deserve to be called like that :victory:
Onecton said:
Glad i can help mate :highfive:
Dafuq? eroot.me is gone? Thanks for the heads up, i will change the link accordingly and reroute the link to my dropbox.
Sorry for that
with eroot 1.2 i wasnt able to root too if i recall correctly.... i fired up the 1.2 version it immediately wanted to upgrade, or something. So i let it pull it's update and it worked like a breeze then.
Regarding your version, i really don't know if it is fake or not sorry but what i can say is that i'm fixing the link and it should be up and running again in approx. 4 min.
eRoot link is fixed :highfive:
if you can wait till there, you have most definately the ledigt version :highfive:
also i'm by far no expert and i don't deserve to be called like that :victory:
Click to expand...
Click to collapse
Thanks again Onecton for the quick reply.
I've downloaded v.1.2 form your original link way before the site is gone (it was yet there 2 days ago!), so no need to be sorry for that
I also fired up v.1.2 like you did, it started to update itself by downloading quite amount of data like you said, but when the update is done, it gave me that error message No such thing with v.1.3.3, it doesn't download anything and recognized my phone immediately... I saw there's even a v.1.3.4 out there!
Sent from my HUAWEI MT1-U06 using xda app-developers app
Hi onecton.
Do you hv the links for eroot v1.3.+?
Thanks. Wanted to try using it since i've already download the 4.2.2 b905 rom..
[email protected]
theoppositeman said:
Hi onecton.
Do you hv the links for eroot v1.3.+?
Thanks. Wanted to try using it since i've already download the 4.2.2 b905 rom..
[email protected]
Click to expand...
Click to collapse
Will edit and search it tonight. In approx. 4-5 hours I will provide an post update and reedit my Entry.
On a related topic. Is the 4.2.2 b905 the general or the Chinese ROM?
Sent from my HUAWEI MT1-U06 using xda app-developers app
Onecton said:
Will edit and search it tonight. In approx. 4-5 hours I will provide an post update and reedit my Entry.
On a related topic. Is the 4.2.2 b905 the general or the Chinese ROM?
Sent from my HUAWEI MT1-U06 using xda app-developers app
Click to expand...
Click to collapse
Thanks fr responding. I did manage to download eroot v1.3.4 but havent test yet.
The b905 is chinese rom i guess based on the topic in the forum (german maybe) called hilfe...
Havent install yet but in our huawei mate forum someone did.
Thanks again.
[email protected]
hi,
manage to download B905 android 4.2.2 rom (presently chinese firmware only). flashed it and seems stable.
i am able to root using EROOT v1.3.4 thanks to you onecton. totally easy and lightning fast rooting procedure.
i downloaded GAPPS (links provided by svvv) which are stable and suitable for the rom.
now everything seems fine and no issue for now.
just want to update.
EROOT v1.3.4 is a 'go' to use (maybe older version can be used too).
Gapps link by svvv is also good to go. and,
both links by dandybq and mixterz are also good to go.
thanks.
theoppositeman said:
hi,
manage to download B905 android 4.2.2 rom (presently chinese firmware only). flashed it and seems stable.
i am able to root using EROOT v1.3.4 thanks to you onecton. totally easy and lightning fast rooting procedure.
i downloaded GAPPS (links provided by svvv) which are stable and suitable for the rom.
now everything seems fine and no issue for now.
just want to update.
EROOT v1.3.4 is a 'go' to use (maybe older version can be used too).
Gapps link by svvv is also good to go. and,
both links by dandybq and mixterz are also good to go.
thanks.
Click to expand...
Click to collapse
you're very welcome mate
will go and download everything, can't wait to run 4.2.2. on that badboy ^^
Thanks for the headsup !
Rooted Huawei Mate
I just rooted my Huawei Ascend Mate, I got rid of some bloatwares on the phone such as Kingsoft Office and the language packs.
However, my internal memory size did not increase.
Just wondering,
1) did Huawei divide the 8gb internal memory into 2 parts, 4gb each? the ROM and usage internal memory (detected as SD2, my external SD detected as SD1)
2) How do I install into the Rom part?
this is a weird phone!
obsidian604 said:
I just rooted my Huawei Ascend Mate, I got rid of some bloatwares on the phone such as Kingsoft Office and the language packs.
However, my internal memory size did not increase.
Just wondering,
1) did Huawei divide the 8gb internal memory into 2 parts, 4gb each? the ROM and usage internal memory (detected as SD2, my external SD detected as SD1)
2) How do I install into the Rom part?
this is a weird phone!
Click to expand...
Click to collapse
My guess is that the 8 GB are indeed divided... But i wouldnt recommend trying to install something in that system reserved space. My guess is that the caches and the ram resides there.
But I am no expert on that stuff.
Maybe its better to post these specific questions over in the main thread .
But in some aspects this is indeed a weird phone
Sent from my HUAWEI MT1-U06 using xda app-developers app
Hi onecton.
Do you think we can use the Rom Cleaner which is also provided in universal use (i guess), to clean up bloatware during installation of rom?
:- about obsidian question, im too think that the ham 8gb is divided coz we have only around 5-6 gb of usage. Maybe the system files resides there. At least we still can use 64gb microcard as expandable memory.
Thanks.
T28#HOX
theoppositeman said:
Hi onecton.
Do you think we can use the Rom Cleaner which is also provided in universal use (i guess), to clean up bloatware during installation of rom?
:- about obsidian question, im too think that the ham 8gb is divided coz we have only around 5-6 gb of usage. Maybe the system files resides there. At least we still can use 64gb microcard as expandable memory.
Thanks.
T28#HOX
Click to expand...
Click to collapse
well this sounds tempting ^^ but i don't know.... maybe i read a bit more into it... since i really like the stock 4.2.2. experience... i found that huawei is really generous with its base system, you can just freeze some of the Emution stuff like the lockscreen, still i would like to prefer a bone stock 4.2.2. or 4.1.2. simply because i don't like that OEM overlay ..
can i install 4.2 or 4.3 on my mate ?? from where i can download this rom??
can i install 4.2 or 4.3 on my mate ??
from where i can download this rom??

[Q] Simcard ISSUE after failed update

I have a serious issue on my D6633, i've tryed to roll out the Lollipop update but due to very slow download speed i had to abort (update was not started yet) after the vol dwn + power phase.
After that phese the mobile is unable to activate any of the 2 sim cards, i've tryed serveral sims and al the possible configurazions of network, what ever i do in the information it shows RAdio OFF like is in airplane mode (but of course is not).
I've manage to update the phone but this did not solved the issue, fasctory reset did not solved the issue.
If i insert the simcar the handy detects it but the radio part seems no to activate somehow.
if i boot with no simcard, i insert one simcard, the phone reboots and at the reboot the simcard i have inserted is disabled, if i manually enable it stais forever trying to activate it, at one point it problebly reaches a timeout it says it's acrtive but in the information screes it says like the radio is off, same as when i enable the airplane mode.
I'm quite worried, any suggestion from the community ?
PHone is HK but i'm in spain now and the update was downloaded in span FW is 23.1.1.E.0.1 but the behaviour was the same with the kitkat rom after the failed reboot.
I'm pretty sure is a kind of software but i would like to know if there is a more lower level way to wipe the device more than just do the factory reset.
Any help apreciated.
riodda said:
I have a serious issue on my D6633, i've tryed to roll out the Lollipop update but due to very slow download speed i had to abort (update was not started yet) after the vol dwn + power phase.
After that phese the mobile is unable to activate any of the 2 sim cards, i've tryed serveral sims and al the possible configurazions of network, what ever i do in the information it shows RAdio OFF like is in airplane mode (but of course is not).
I've manage to update the phone but this did not solved the issue, fasctory reset did not solved the issue.
If i insert the simcar the handy detects it but the radio part seems no to activate somehow.
if i boot with no simcard, i insert one simcard, the phone reboots and at the reboot the simcard i have inserted is disabled, if i manually enable it stais forever trying to activate it, at one point it problebly reaches a timeout it says it's acrtive but in the information screes it says like the radio is off, same as when i enable the airplane mode.
I'm quite worried, any suggestion from the community ?
PHone is HK but i'm in spain now and the update was downloaded in span FW is 23.1.1.E.0.1 but the behaviour was the same with the kitkat rom after the failed reboot.
I'm pretty sure is a kind of software but i would like to know if there is a more lower level way to wipe the device more than just do the factory reset.
Any help apreciated.
Click to expand...
Click to collapse
You need to flash a ftf, that will solve your problem.
TheTeslaCoil said:
You need to flash a ftf, that will solve your problem.
Click to expand...
Click to collapse
Is it there a way to do it without unlocking the boot loader ? Phone is still under warranty i don't whant to loose it...
Thanks.
riodda said:
Is it there a way to do it without unlocking the boot loader ? Phone is still under warranty i don't whant to loose it...
Thanks.
Click to expand...
Click to collapse
Sure. With Flashtool.
Download it from internet.There are tutorials on how to flash ftf also on the internet.
Good luck
TheTeslaCoil said:
Sure. With Flashtool.
Download it from internet.There are tutorials on how to flash ftf also on the internet.
Good luck
Click to expand...
Click to collapse
Thanks Mate, i'm downloading it just now, i hope to get enough bandwith to download the ftf from the hotel, for the ftf i have to use xperifirm right ?
But is it a common issue that a simple flash mode boot without a real flash ****s up all the radio part of the phone (actually also the vibe is not working anymore)?
Thanks.
riodda said:
Thanks Mate, i'm downloading it just now, i hope to get enough bandwith to download the ftf from the hotel, for the ftf i have to use xperifirm right ?
But is it a common issue that a simple flash mode boot without a real flash ****s up all the radio part of the phone (actually also the vibe is not working anymore)?
Thanks.
Click to expand...
Click to collapse
Yes, something wasn' t right, but don' t worry, a clean flash, and it will be like a new one.
I've flashed the ftf but no changes, gosh !
This are the sysntoms:
No network from both the sims (it says radio off) enabling or disabling sims take a big while, changing data from sim 1 to sim 2 and vice versa take ages (it looks like it just reaches a timeout).
It seems that the failed update some how diabled the radio of the SOC at low level but i have no idea ho to enable it.
Any help wellcome.
Thanks.
riodda said:
I've flashed the ftf but no changes, gosh !
This are the sysntoms:
No network from both the sims (it says radio off) enabling or disabling sims take a big while, changing data from sim 1 to sim 2 and vice versa take ages (it looks like it just reaches a timeout).
It seems that the failed update some how diabled the radio of the SOC at low level but i have no idea ho to enable it.
Any help wellcome.
Thanks.
Click to expand...
Click to collapse
Ok, it's a hardware problem.
Replace the phone.
TheTeslaCoil said:
Ok, it's a hardware problem.
Replace the phone.
Click to expand...
Click to collapse
Gosh, how the hell is possible that from just beacouse a flash boot the radio stops working !
I hope sony italy recognize the HK warranty....finger crossed....i'm quite disappointed by sony quality if justa after 6 months the phone is dead !
Thanks for help anyway.
riodda said:
Gosh, how the hell is possible that from just beacouse a flash boot the radio stops working !
I hope sony italy recognize the HK warranty....finger crossed....i'm quite disappointed by sony quality if justa after 6 months the phone is dead !
Thanks for help anyway.
Click to expand...
Click to collapse
Since a clean ftf flash did not solved the problem, well...maybe you can take it to a service.
Have you tried to force a software repair using PCComapnion?
Download PCCompanion, click on software update, if it says you have the latest software click on "Repair my phone" and follow the instructions.
gregbradley said:
Have you tried to force a software repair using PCComapnion?
Download PCCompanion, click on software update, if it says you have the latest software click on "Repair my phone" and follow the instructions.
Click to expand...
Click to collapse
It' s almost the same with a clean ftf flash.
But maybe he' s in luck.

[ROOT + TWRP 3.1-0] Vodafone Smart Ultra 7

UPDATED THREAD
Hey, guys. So here it is:
ROOT + TWRP
Smart Ultra 7 ONLY !
NEW TWRP VERSION: 3.1-0
_____________________________________________________
HOW TO ROOT ? :
This nethod will break OTA, so for update you must use SUGAR.
1) Download TWRP and SPFT from my PAGE and place it on desktop.
2) Download these files and put them on your SD CARD: SuperSU_1 and SuperSU_2
3) Turn off your phone and run SP FLASH TOOL.
3) When the SP FLASH TOOL starts, select MT6755 scatter file and MTK_AllinOne_DA.bin file (they are in SPFT folder)
4) Select ONLY recovery and load the TWRP_3.X.X file. (X.X means a version of TWRP)
5) Press download.
6) Connect your powered off phone to PC via USB cable.
7) After flashing the TWRP, hold VOLUME UP + POWER to boot into TWRP.
8) In TWRP press "INSTALL" and flash the boot patch - SUPERSU_1 and then flash root - SUPERSU_2.
9) Reboot and enjoy.
KingRoot Fidelity
Is it safe to root with KingRoot? Have been trying to figure out the best way root this phone for two weeks now, and trying to avoid KingRoot all this time.
Can you replace the KingRoot Binaries and Root Management Tools with the SuperSU ones?
Will Xposed Framework work on this phone? Really want AdAway, Greenify and Xposed Tweaks on the Vodafone Smart Ultra 7.
Thanks!
You can replace kingroot with supersu thanks to this app:
http://download.dlapk.org/?apkid=darkslide.com.supersume&ver=6.7&server=snah
I did not try the xposed yet.
But it should work properly.
Thanks for the reply,
I still feel skeptical about KingRoot, and there are reports that indicate that replacing KingRoot with SuperSU isn't that easy either, KingRoot seems to completely deny root once altered or removed, which makes it look even more shady, I really want root on this phone, there are tweaks I would love to do such as dpi change, remove the vodafone label on the statusbar and more, but I don't know if I'm willing to use KingRoot in the process. I'm used to SuperSU and Xposed Framework working flawlessly, so I'm really 'scared' on this one.
Thanks
Not working on my ultra 7
bluezinx said:
Not working on my ultra 7
Click to expand...
Click to collapse
Xposed Framework? Or root in general? (KingRoot)
skullbo said:
Xposed Framework? Or root in general? (KingRoot)
Click to expand...
Click to collapse
Root. After enabling USB debugging and unknown sources, I click "try to root" and then get the "Failed to root" screen
bluezinx said:
Root. After enabling USB debugging and unknown sources, I click "try to root" and then get the "Failed to root" screen
Click to expand...
Click to collapse
I guess we'll have to wait for further development on the phone, I won't put my phone trough KingRoot, and you even reported that it isn't working for you... oh well.
Really wanted root on this phone, lets hope someone actually picks it up just as they did with the previous model (Smart Prime 6 / Smart Ultra 6).
İt did not work for me too ı hope a way can be found for rooting otherwise i desperately regret to bought this phone
4TheBesT said:
İt did not work for me too ı hope a way can be found for rooting otherwise i desperately regret to bought this phone
Click to expand...
Click to collapse
Don't give up just yet, I do understand your desperation, as I feel almost the same as you, but you'll see someone will find a way, at least I hope...
This phone its awesome for its price point, and would be absolutely marvelous with all the tweaks and adjustments root brings to the table.
Who knows, maybe we'll have a full developed phone (custom ROMs, root, recovery, all of that good stuff), we can only wish someone works on it... :highfive:
Doesn't work for me too
Waiting for some devs...
Inviato dal mio VFD 700 utilizzando Tapatalk
skullbo said:
Don't give up just yet, I do understand your desperation, as I feel almost the same as you, but you'll see someone will find a way, at least I hope...
This phone its awesome for its price point, and would be absolutely marvelous with all the tweaks and adjustments root brings to the table.
Who knows, maybe we'll have a full developed phone (custom ROMs, root, recovery, all of that good stuff), we can only wish someone works on it... :highfive:
Click to expand...
Click to collapse
I think same as you think mate. But ım afraid how much ppl will choose this phone this year if it will be less than we have to be afraid but i hope more ppl buy this and may some devoloper help us for rooting and more importantly create a stock rom for make sure when we deal with phone ( rooting rom kernel etc)
4TheBesT said:
I think same as you think mate. But ım afraid how much ppl will choose this phone this year if it will be less than we have to be afraid but i hope more ppl buy this and may some devoloper help us for rooting and more importantly create a stock rom for make sure when we deal with phone ( rooting rom kernel etc)
Click to expand...
Click to collapse
Let's see mate, let's see...
I surely hope everything goes our way!
Guys!
I'm sorry, I gave you the wrong link..
This one is working for our VFD 700:
http://king.myapp.com/myapp/kdown/i...-svn372160-201609012210b_protected_signed.apk
once again, sorry.
Now I'm working on custom recoveries for this phone.
Adreno306™ said:
Guys!
I'm sorry, I gave you the wrong link..
This one is working for our VFD 700:
http://king.myapp.com/myapp/kdown/i...-svn372160-201609012210b_protected_signed.apk
once again, sorry.
Click to expand...
Click to collapse
Hey mate, just tried with the link you provided, unfortunately no success.
Been trying since yesterday to root with KingRoot, using different versions even.
Any ideas? USB Debugging in turned on and Unknown Sources as well (obviously).
Really really really want root on this phone.
Thanks!
Custom Recovery, Woop Woop :highfive:
That's strange that it's not working for you..
Many people say that it's not working for them, others say that it's working..
Where the problem could be?
I got my phone rooted after the second attempt, because I forgot to turn on USB debugging.
Adreno306™ said:
That's strange that it's not working for you..
Many people say that it's not working for them, others say that it's working..
Where the problem could be?
I got my phone rooted after the second attempt, because I forgot to turn on USB debugging.
Click to expand...
Click to collapse
Everything matches the about phone screen you've sent,
I don't really know what can be different or wrong, but I've done everything right, I even used USB debugging to change my phone's DPI trough Android SDK...
I'm really confused, should I keep trying?
skullbo said:
Everything matches the about phone screen you've sent,
I don't really know what can be different or wrong, but I've done everything right, I even used USB debugging to change my phone's DPI trough Android SDK...
I'm really confused, should I keep trying?
Click to expand...
Click to collapse
Umm, did you update your phone?
Because my custom build version is 120FKN1 and I even didn't update it.
Adreno306™ said:
Umm, did you update your phone?
Because my custom build version is 120FKN1 and I even didn't update it.
Click to expand...
Click to collapse
I didn't, the phone came as it is out of the box, no software updates were made...
I guess we've found the issue, if the software versions don't match, that means everyone with yours (120FKN1) can root with KingRoot, and everyone with mine (060FFN1) can't...
I've got an issue in my hands I see...

Categories

Resources