Related
I get whats app messages only after unlocking my phone.If there has been no whatsapp messages for a long time and my phone was locked and some 1 sends me a message I recieve it only after unlocking my phone.This happens only on GPRS.On WiFi I dont face this problem.Does GPRS time out after sometime?If yes,Is there a way to stop it from timing out.I DO NOT use any battery saver apps that cut the GPRS Packet data when the phone is locked.
Firmware -Latest DDKP3
Thanks in advance.
Flash xda bam's latest kernel and see if it helps
Cheers
Sent from my GT-i9003 powered by MIUI
bscraze said:
Flash xda bam's latest kernel and see if it helps
Cheers
Sent from my GT-i9003 powered by MIUI
Click to expand...
Click to collapse
Thanks for the reply. Im from India can i still flash with the Rom you suggested me? If i flash will i be able to connect to Kies. Sorry for the noobish questions. Thanks
sl4y3r88 said:
Thanks for the reply. Im from India can i still flash with the Rom you suggested me? If i flash will i be able to connect to Kies. Sorry for the noobish questions. Thanks
Click to expand...
Click to collapse
It's not a Rom bro, its a kernel, your Rom will still be stock, and yes Kies will still detect it, but be aware that your warranty will be void once you root your phone (comes included with the kernel) but you can always revert back to the stock rom easily.
sl4y3r88 said:
I get whats app messages only after unlocking my phone.If there has been no whatsapp messages for a long time and my phone was locked and some 1 sends me a message I recieve it only after unlocking my phone.This happens only on GPRS.On WiFi I dont face this problem.Does GPRS time out after sometime?If yes,Is there a way to stop it from timing out.I DO NOT use any battery saver apps that cut the GPRS Packet data when the phone is locked.
Firmware -Latest DDKP3
Thanks in advance.
Click to expand...
Click to collapse
my wife phone's has the same issue
mzone1510 said:
It's not a Rom bro, its a kernel, your Rom will still be stock, and yes Kies will still detect it, but be aware that your warranty will be void once you root your phone (comes included with the kernel) but you can always revert back to the stock rom easily.
Click to expand...
Click to collapse
Thanks for the info Buddy. Could you be kind enough to post the link with the. Procedure how to flash. Thanks again.
Here you go. follow the instructions on the following link. Cheers!
http://forum.xda-developers.com/showthread.php?t=1355675
are u installing juice defender?
neutronz said:
are u installing juice defender?
Click to expand...
Click to collapse
Nope, no juice defender nor any battery saving app as i earlier mentioned.
Guys thanks for the help,Im a Technically sound guy,ON COMPUTERS, Cellphones not really my domain.The link hellismine89 posted spoke about CPU overclocking and high end stuff.All I want is a Guide to make my phone
P.S Please give the best option for an Indian/Asian device
1.Run smooth
2.Rooted
3.As close to stock as possibe witha chance to get to the 100% official rom as given by Samsung.
4.Rooted device should be detected by Kies.
Thanks A lot guys and sorry for being a pain in the ass.
sl4y3r88 said:
Guys thanks for the help,Im a Technically sound guy,ON COMPUTERS, Cellphones not really my domain.The link hellismine89 posted spoke about CPU overclocking and high end stuff.All I want is a Guide to make my phone
P.S Please give the best option for an Indian/Asian device
1.Run smooth
2.Rooted
3.As close to stock as possibe witha chance to get to the 100% official rom as given by Samsung.
4.Rooted device should be detected by Kies.
Thanks A lot guys and sorry for being a pain in the ass.
Click to expand...
Click to collapse
Its simple,
Download the kernel 'PDA_BCK_CF-root_universal_beta10.tar' as posted in the link hellismine89 posted.
Download Odin (google it, should be easy enough to find)
Get your phone into 'Download' mode. for that, switch your phone off, and turn it on again while holding the middle button and volume down key.
Open odin, and under PDA select the kernel file you had downloaded earlier. Make sure that 'PHONE EFS CLEAR' is UNchecked! Do not check it! *VERY IMP* or you will lose your IMEI.
Just click on 'start' THAT IS ALL!
mzone1510 said:
Its simple,
Download the kernel 'PDA_BCK_CF-root_universal_beta10.tar' as posted in the link hellismine89 posted.
Download Odin (google it, should be easy enough to find)
Get your phone into 'Download' mode. for that, switch your phone off, and turn it on again while holding the middle button and volume down key.
Open odin, and under PDA select the kernel file you had downloaded earlier. Make sure that 'PHONE EFS CLEAR' is UNchecked! Do not check it! *VERY IMP* or you will lose your IMEI.
Just click on 'start' THAT IS ALL!
Click to expand...
Click to collapse
That's what i needed.Thanks Bro.Im assuming I can get my phone to stock settings if I ever wanted to.
Can some 1 tell me the difference between the files in this link
http://forum.xda-developers.com/showthread.php?t=1331253
and the Bam Kernal thing that hellismine89 posted?
sl4y3r88 said:
Can some 1 tell me the difference between the files in this link
http://forum.xda-developers.com/showthread.php?t=1331253
and the Bam Kernal thing that hellismine89 posted?
Click to expand...
Click to collapse
What you have posted is CF-ROOT which basically 'Roots' your phone and gives some tweaks and recovery etc, Bam's kernel is the ONLY one with the sync bug fixed and also comes with CF root... So Just flash Bam's kernel & you will be happy.
Hi Please see the screenshot of Odin Are the right items checked or do I need to check/Uncheck any. I wont Check the EFS option ;-) Version 1.85 is what I got from this forum.Il be using this to flash with Bams Kernel.Should I backup my contacts and calendar on Kies or use some app?Id like to use Kies.
This is the one il be downloading - PDA_BCK_CF-root_universal_beta11.tar - [Click for QR Code] (7.58 MB, 58 views) - correct? just 7 MB ?
or should I be using this ? PDA_BCK_XXKPQ_beta11.tar - [Click for QR Code] (5.75 MB, 27 views)
Is the phone going to be overcloked when I use these?
Thanks so much for the prompt replies by all,Really appreciate it.
sl4y3r88 said:
Hi Please see the screenshot of Odin Are the right items checked or do I need to check/Uncheck any. I wont Check the EFS option ;-) Version 1.85 is what I got from this forum.Il be using this to flash with Bams Kernel.Should I backup my contacts and calendar on Kies or use some app?Id like to use Kies.
This is the one il be downloading - PDA_BCK_CF-root_universal_beta11.tar - [Click for QR Code] (7.58 MB, 58 views) - correct? just 7 MB ?
or should I be using this ? PDA_BCK_XXKPQ_beta11.tar - [Click for QR Code] (5.75 MB, 27 views)
Is the phone going to be overcloked when I use these?
Thanks so much for the prompt replies by all,Really appreciate it.
Click to expand...
Click to collapse
Yes my friend, all looks good, You can use either one, only difference is one comes packaged with cf root the other is without, go with the above one as you don't have to go rooting all over again.
Regarding overclock, your phone will have the capability to be overclocked, but you can choose whether you want it to be or not, just install 'no frills cpu control' from the market and select your clock speed to 1000 (stock).
Generally there is no need for a backup but, it never hurts! If you get stuck on the boot screen after flashing, don't panic, just get into recovery mode (vol up+home button+power button) and clear cache and davlik cache.
mzone1510 said:
Yes my friend, all looks good, You can use either one, only difference is one comes packaged with cf root the other is without, go with the above one as you don't have to go rooting all over again.
Regarding overclock, your phone will have the capability to be overclocked, but you can choose whether you want it to be or not, just install 'no frills cpu control' from the market and select your clock speed to 1000 (stock).
Generally there is no need for a backup but, it never hurts! If you get stuck on the boot screen after flashing, don't panic, just get into recovery mode (vol up+home button+power button) and clear cache and davlik cache.
Click to expand...
Click to collapse
Hey mzone1510 what kernel are you using? I want to use the above one with the built-in CF root but the guy who has posted it says its not recommended.. and its not tested and stuff like that.I cant afford to brick this phone at ANY cost,hope that tells you why im asking 1 million questions.Thanks for being so patient.I'm currently on the latest DDKP3.Also if I do not download the no frills app will the phone be overclocked by default after I update the Kernel ?
sl4y3r88 said:
Hey mzone1510 what kernel are you using? I want to use the above one with the built-in CF root but the guy who has posted it says its not recommended.. and its not tested and stuff like that.I cant afford to brick this phone at ANY cost,hope that tells you why im asking 1 million questions.Thanks for being so patient.I'm currently on the latest DDKP3.Also if I do not download the no frills app will the phone be overclocked by default after I update the Kernel ?
Click to expand...
Click to collapse
It will only be a soft brick which can be fixed easily. . Trust me with this flashing stuff, I always have a backup and a efs backup too.
Cheers
Sent from my GT-i9003 powered by MIUI
sl4y3r88 said:
Hey mzone1510 what kernel are you using? I want to use the above one with the built-in CF root but the guy who has posted it says its not recommended.. and its not tested and stuff like that.I cant afford to brick this phone at ANY cost,hope that tells you why im asking 1 million questions.Thanks for being so patient.I'm currently on the latest DDKP3.Also if I do not download the no frills app will the phone be overclocked by default after I update the Kernel ?
Click to expand...
Click to collapse
I am on DDKP3 & using Bam's kernel beta 10 with cf root. Don't worry about the version with cf root, it works fine,no problems at all, and your phone will not get bricked that easily, just remember the efs thing though! Regarding overclocking I think bam has mentioned that it boots at 1000 (stock) by default but runs at 1200 for 5 secs or so. SO its not really a big deal, but its good to have no frills just to be sure.
mzone1510 said:
I am on DDKP3 & using Bam's kernel beta 10 with cf root. Don't worry about the version with cf root, it works fine,no problems at all, and your phone will not get bricked that easily, just remember the efs thing though! Regarding overclocking I think bam has mentioned that it boots at 1000 (stock) by default but runs at 1200 for 5 secs or so. SO its not really a big deal, but its good to have no frills just to be sure.
Click to expand...
Click to collapse
Cool so I will just stay with the beta 10 with CF root just like you ,I know 11 is newer but since the dev himself doesnt use it and says its untested I'd feel safer to be with a know and used release.Thanks a ton guys!
Hi... again...
I am using CM10.1/JB 4.2.2. When I reboot the phone in recovery mode I can see the CPU Setting option. With this option can I OverClock my phone?. There is a tutorial about how to to that with the CPU Setting Option.
Thanks!
alrojas said:
Hi... again...
I am using CM10.1/JB 4.2.2. When I reboot the phone in recovery mode I can see the CPU Setting option. With this option can I OverClock my phone?. There is a tutorial about how to to that with the CPU Setting Option.
Thanks!
Click to expand...
Click to collapse
No it won't actually work. There isn't really a good way that I know of to overclock it yet. Hopefully we can add it in the future!
I am currently running Cromi Xenogenesis Rom, I was wondering if anyone can suggest a good ROM that's smooth and fast to try that I can just easily do a wipe and flash?
Sent from my ASUS Transformer Pad TF300T using XDA Premium 4 mobile app
MrKite4 said:
I am currently running Cromi Xenogenesis Rom, I was wondering if anyone can suggest a good ROM that's smooth and fast to try that I can just easily do a wipe and flash?
Sent from my ASUS Transformer Pad TF300T using XDA Premium 4 mobile app
Click to expand...
Click to collapse
comi-x is the bext rom by far on this tablet mate by far IMO
Cool thanks, just wanted someones opinion to see if there was a better one.
Sent from my LG-E980 using XDA Premium 4 mobile app
There are other ones that aren't stock based but even so cromi is still my favourite by far
Sent from my Nexus 7 using Tapatalk 4
idk cm10.2 runs pretty dang well. especially oc to 1.5 or 1.6
kaos420 said:
idk cm10.2 runs pretty dang well. especially oc to 1.5 or 1.6
Click to expand...
Click to collapse
its always preference mate i tend to choose stock roms but loads of people love cm 10.2 i think the best thing to do is try them both and then see what you like the most
robgee789 said:
its always preference mate i tend to choose stock roms but loads of people love cm 10.2 i think the best thing to do is try them both and then see what you like the most
Click to expand...
Click to collapse
Hi guys
New to the forum.
Was curious anyone be able to point out where I can read/download some of the roms?
I'm still a little lost on which one to choose for my tablet.
Thanks again.
Lummers said:
Hi guys
New to the forum.
Was curious anyone be able to point out where I can read/download some of the roms?
I'm still a little lost on which one to choose for my tablet.
Thanks again.
Click to expand...
Click to collapse
There all here mate
http://forum.xda-developers.com/forumdisplay.php?f=1582
And if you need any more info just ask mate
robgee789 said:
There all here mate
http://forum.xda-developers.com/forumdisplay.php?f=1582
And if you need any more info just ask mate
Click to expand...
Click to collapse
Thanks for pointing me to the right direction.
I'll be doing a little research before root/rom tonight!
Super excited and can't wait to see what's the potential I'll be unlocking from my tablet.
Was wondering if anyone can help me out.
I've downloaded the unlock from Asus's
Threw it on the SDcard, ran the unlock
I believe it's unlocked, because it says at the top right that device is not locked
I tried this -
Hold Power + Vol Down until a message appears (it doesn't appear anymore on Jelly Bean bootloader) ("Press Vol. Up to enter RCK (5s)") : DON'T PRESS VOL UP
After 5 seconds, a new menu appears (if it's not already there). Press Vol Down once to change to the USB icon, then press Vol. Up to validate (you have to do this in less than 10 seconds, otherwise your tablet will boot Android OS)
But I don't see the option to press/select the USB Icon
I am using the Jelly Bean 4.2
Any tips or pointers
---------- Post added at 11:02 PM ---------- Previous post was at 10:15 PM ----------
Lummers said:
Was wondering if anyone can help me out.
I've downloaded the unlock from Asus's
Threw it on the SDcard, ran the unlock
I believe it's unlocked, because it says at the top right that device is not locked
I tried this -
Hold Power + Vol Down until a message appears (it doesn't appear anymore on Jelly Bean bootloader) ("Press Vol. Up to enter RCK (5s)") : DON'T PRESS VOL UP
After 5 seconds, a new menu appears (if it's not already there). Press Vol Down once to change to the USB icon, then press Vol. Up to validate (you have to do this in less than 10 seconds, otherwise your tablet will boot Android OS)
But I don't see the option to press/select the USB Icon
I am using the Jelly Bean 4.2
Any tips or pointers
Click to expand...
Click to collapse
Didn't realize that my version won't have a USB icon, it's already in FastBoot mode
CWM has been installed on it =)
Next backup with titanium, then going to try out Comi-X!
Lummers said:
Was wondering if anyone can help me out.
I've downloaded the unlock from Asus's
Threw it on the SDcard, ran the unlock
I believe it's unlocked, because it says at the top right that device is not locked
I tried this -
Hold Power + Vol Down until a message appears (it doesn't appear anymore on Jelly Bean bootloader) ("Press Vol. Up to enter RCK (5s)") : DON'T PRESS VOL UP
After 5 seconds, a new menu appears (if it's not already there). Press Vol Down once to change to the USB icon, then press Vol. Up to validate (you have to do this in less than 10 seconds, otherwise your tablet will boot Android OS)
But I don't see the option to press/select the USB Icon
I am using the Jelly Bean 4.2
Any tips or pointers
---------- Post added at 11:02 PM ---------- Previous post was at 10:15 PM ----------
Didn't realize that my version won't have a USB icon, it's already in FastBoot mode
CWM has been installed on it =)
Next backup with titanium, then going to try out Comi-X!
Click to expand...
Click to collapse
Bah....
Anyone able to help me out a little?
When I try to load from zip file I get this -
"e:can't mount /sdcard/"
Seems like it can't see the SDcard or the Internal, making me unable to root the machine......
:crying:
Lummers said:
Was wondering if anyone can help me out.
I've downloaded the unlock from Asus's
Threw it on the SDcard, ran the unlock
I believe it's unlocked, because it says at the top right that device is not locked
I tried this -
Hold Power + Vol Down until a message appears (it doesn't appear anymore on Jelly Bean bootloader) ("Press Vol. Up to enter RCK (5s)") : DON'T PRESS VOL UP
After 5 seconds, a new menu appears (if it's not already there). Press Vol Down once to change to the USB icon, then press Vol. Up to validate (you have to do this in less than 10 seconds, otherwise your tablet will boot Android OS)
But I don't see the option to press/select the USB Icon
I am using the Jelly Bean 4.2
Any tips or pointers
---------- Post added at 11:02 PM ---------- Previous post was at 10:15 PM ----------
Didn't realize that my version won't have a USB icon, it's already in FastBoot mode
CWM has been installed on it =)
Next backup with titanium, then going to try out Comi-X!
Click to expand...
Click to collapse
i wouldnt use cwm mate as it has caused loads of problems for lots of people, you should use twrp mate, here is the best guide http://forum.xda-developers.com/showthread.php?t=2187982
robgee789 said:
i wouldnt use cwm mate as it has caused loads of problems for lots of people, you should use twrp mate, here is the best guide http://forum.xda-developers.com/showthread.php?t=2187982
Click to expand...
Click to collapse
I was totally tossed up on using either CWM or TWRP, I'll load up TWRP and give you a progression update afterwards.
Thanks for the tip.
---------- Post added at 11:01 AM ---------- Previous post was at 10:02 AM ----------
robgee789 said:
i wouldnt use cwm mate as it has caused loads of problems for lots of people, you should use twrp mate, here is the best guide http://forum.xda-developers.com/showthread.php?t=2187982
Click to expand...
Click to collapse
Followed that guide, and wow, that was easy.
Rooted and TWRP as recovery now.
Thank you for your guidance once again.
Now I'm thinking of trying - CROMi-X 5.0.3 ODEX/DEODEX 10.6.1.27.1
Lummers said:
I was totally tossed up on using either CWM or TWRP, I'll load up TWRP and give you a progression update afterwards.
Thanks for the tip.
---------- Post added at 11:01 AM ---------- Previous post was at 10:02 AM ----------
Followed that guide, and wow, that was easy.
Rooted and TWRP as recovery now.
Thank you for your guidance once again.
Now I'm thinking of trying - CROMi-X 5.0.3 ODEX/DEODEX 10.6.1.27.1
Click to expand...
Click to collapse
seriously mate go for it cromi rocks but defiantly choose to disable fsync mate that really speeds up this tablet
robgee789 said:
seriously mate go for it cromi rocks but defiantly choose to disable fsync mate that really speeds up this tablet
Click to expand...
Click to collapse
Yeah I've been looking around and what not, been tossed up on CyanogenMod and the Cromi-X , but I think the features from the Comi-X suites me more.
I'll keep you posted after I test it out, going to do a Nandroid Backup now and install the rom
Curious
I'm just going through the setup/installation process for Cromi-X
Do we have to reflash the ROM to go through the setup, OR can we select some of those options again after the installation?
Such as DSP Manager, X-Loud, and some of the other minor tweaks
Doesn't seem tooo tedious to backup and restore, but I wouldn't want to reflash all the time just to adjust some settings....
Or it's just part of the deal of ROM's.......
All in all, Cromi-X has been installed and I am stoked.
Benchmark Results Request
So I got Comi-X installed
Does anyone have any benchmark results that I can compare to?
Using AnTuTu Benchmark atm and I'm hitting about mid 14000's.
Not sure if that's what this tablet can output to.
Lummers said:
So I got Comi-X installed
Does anyone have any benchmark results that I can compare to?
Using AnTuTu Benchmark atm and I'm hitting about mid 14000's.
Not sure if that's what this tablet can output to.
Click to expand...
Click to collapse
if you want to change any settings mate just reflash the rom and choose to wipe the dalvic cache while going through the settings there is no need to do a full wipe for that and benchmarks aren't everything mate but most people use quadrant, and goddly has gotten over 7000 on that which is crazy high, he got it using thats overclock kernel that was built for the tf700, but hunds kernel can be overclocked and that is built for the tf300 but im using thats v4 kernel which cant be overclocked but i dont think it needs to be and the battery life on thats kernel is crazy good and my tablet is well over a year old
robgee789 said:
if you want to change any settings mate just reflash the rom and choose to wipe the dalvic cache while going through the settings there is no need to do a full wipe for that and benchmarks aren't everything mate but most people use quadrant, and goddly has gotten over 7000 on that which is crazy high, he got it using thats overclock kernel that was built for the tf700, but hunds kernel can be overclocked and that is built for the tf300 but im using thats v4 kernel which cant be overclocked but i dont think it needs to be and the battery life on thats kernel is crazy good and my tablet is well over a year old
Click to expand...
Click to collapse
Hmmm ok
Just curious where would I be able to find other Kernels?
I'm using hunds kernel that came with Cromi-X rom (I'm guessing)
Thanks for all the help btw, totally learning everything quickly.
Lummers said:
Hmmm ok
Just curious where would I be able to find other Kernels?
I'm using hunds kernel that came with Cromi-X rom (I'm guessing)
Thanks for all the help btw, totally learning everything quickly.
Click to expand...
Click to collapse
in the second post of the cromi thread there is a kernel and tweaks installer but here is the link to it any way because im really nice lol
http://d-h.st/zDx
if you use thats kernel for the tf300 then try the undervolt option to give you even better battry life but if you use hunds and want to overclock it then its best to try the overvolt option to increase stability
Android Tweaks App - for STOCK ROM AND CUSTOM....
App links - Free and Donated Version
Free Google Play Link : Android Mobile Tweaks
Donated : https://play.google.com/store/apps/details?id=com.appz.donatetweaks
As it is with any other desktop or mobile operating system, the performance of your Android OS will start to diminish after you use it for some time. Mobile operating systems are supposed to be lighter and faster to keep up with our need to be on the move, yet still give us access to everything. Want to have the best of both worlds? Then, it’s time to do some housekeeping.
If you have noticed that your Android phones performance have been ‘slowing down’, particularly after you’ve been loading it up with tons of Android apps (we don’t blame you) from the Google Play store.
With just a few tweaks and changes, you’d probably be able to breathe life into your Android specifically those that have been updated to Android 2.3 and above.
***** Key Feature *****
Device performances improved at 360°
Complete change in Android System
Very lightweight Script engine
Improves a Graphics, Pure Graphics HD, pictures, etc..
Multimedia time drastically reduced scan interval.
2G internet work like 3G fast
3G internet work like Jet fast
All database optimized
Hardware features auto function enabled for better experience
Any benchmark score will be improved..( AnTuTu ) Test and Trust
Phone boot up very fast..
Can be used for Stock and Custom Rom
Play any game with out lag...
System cleaned automatically, ( TheCache and Davik)
****** , Display, Pictures , Graphics******
Enables deep to save CPU
CPU Parts of bravia engine
Enabled non aggressive dithering to save CPU
When the device is locked CPU will turn off automatically
Parts of Cross Breeder, Adrenaline Engine , Pure-graphics HD, & V6 supercharger
Generates video entropy
****** I/O Schedulers, CPU, Governors,*******
Very minor changed in kernel to scale the frequencies
Lightens the load on the CPU switching the workload to GPU rendering
Enable the swap partition in Android (experimental)
****** Battery *******
Drastically decreased the drainage of battery
Auto check that consume too much battery stop them automatically - based on wakelocks
When the phone is charging reduces system services for faster charging
The battery is Wipe & Cab on every boot
Disable animation of the system when the battery is nearly exhausted
Improvements in build.prop as regards the part of consumption
******* Compatibility - Any Device ********
The Tweaks works on any device eve Stock or Custom Rom..
Install the stock version only on your stock firmware of your phone....
if your device don't have gingerbread or ICS officially, install the CM version (This also applies to the AOSP)
Any issues Please Mail us, .. [email protected] I request you all please don't write BAD Review or Rating..
Please Don't forget to hit THANKS BUTTON
Try with your own risk...
Credits goes to XDA Developer Jeeko
Can I flash this with flash Gordon? Could it run on LG L5x? It has no recovery
Sent from my LG-E450f using xda app-developers app
Bro
sonrics1993 said:
Can I flash this with flash Gordon? Could it run on LG L5x? It has no recovery
Sent from my LG-E450f using xda app-developers app
Click to expand...
Click to collapse
You can install the custom recovery... which is available in XDA just search..
I will test the both pro and version and update you the result..
I tried out the free version on Omni (infected) 4.4.2 with Gustavo kernel (zzmove + row) on my I9100.
It becomes fast but I think the window animations become a bit too fast, it looks almost unnatural.
It fast but not very smooth since that "jitter" is always there.
Still, it's just a few hours.
Will test more for battery life and other things.
Result
After using the tweaks I feel the performance us quit smooth.... An tutu score increases into 650+....
File transfer seems good... I will update complete report soon...
I admire font/size used in post.
Really.
What font is this, helvetica?
No thanks for me, since i cannot see google-outside download link(i mean NORMAL download link).
Not everyone uses gapps, you know.
Size
If am right 4 or 5.... Not sure about the font name May be Arial Narrow..
pupakota said:
I admire font/size used in post.
Really.
What font is this, helvetica?
No thanks for me, since i cannot see google-outside download link(i mean NORMAL download link).
Not everyone uses gapps, you know.
Click to expand...
Click to collapse
Thanks
jacksparao said:
After using the tweaks I feel the performance us quit smooth.... An tutu score increases into 650+....
File transfer seems good... I will update complete report soon...
Click to expand...
Click to collapse
Thanks, If u can please submit a complete Test report....
update
Theworld2020 said:
Thanks, If u can please submit a complete Test report....
Click to expand...
Click to collapse
loaded with lots of works.. will post once I got the spare time..
updated
Found a uninstalled option in new update... very good to install and uninstall...........
Good going...
uninstall
Friends any one tried uninstall the tweak.. its a just a doubt....
Benchmark
Anyone there to submit there benchmark comparison report with before and after Tweak......
i will post
I will post my review once i got spare time..
Compatablility for Stock roms
I am unsure about the compatability for my HTC One - stock 4.3
In the OP and on Play there is no montion that the phone must be rooted etc.
Play states its compatable, I downloaded and installed the APK and it tells me to hold POwer and Volume Up and then go to ANdroid Recovery to Select Update.zip
I do not get the Android recovery, there must be another way. I do not have a custom recovery and bootloader is lock, as I said my phone is stock.
Is this safe to do? Does this work for HTC mobiles?
twerg said:
I am unsure about the compatability for my HTC One - stock 4.3
In the OP and on Play there is no montion that the phone must be rooted etc.
Play states its compatable, I downloaded and installed the APK and it tells me to hold POwer and Volume Up and then go to ANdroid Recovery to Select Update.zip
I do not get the Android recovery, there must be another way. I do not have a custom recovery and bootloader is lock, as I said my phone is stock.
Is this safe to do? Does this work for HTC mobiles?
Click to expand...
Click to collapse
Hi, You must do boot loader. Once you done bootloader, You can go to Recovery mode.
For active Bootloader you can find the steps in HTC Site....
Enjoy Tweak..!!!
Theworld2020 said:
Hi, You must do boot loader. Once you done bootloader, You can go to Recovery mode.
For active Bootloader you can find the steps in HTC Site....
Enjoy Tweak..!!!
Click to expand...
Click to collapse
hi,
I downloaded your tweak..
I m on stock rom,Samsung galaxy s4,if you know,Samsung introduced a new Knox bootloader which records if anything alien happens to phone,like custom recovery it flashing or other things
so I just wanted to know if its safe to flash it via android stock recovery or not?
True
I use S4 and Note3, I using the tweaks in both phones.. really enjoying the experience..
Its your wish to use or not.. Once you flash your image to stock image all the data will be erased.. its one impossible concept to record the flashing stuff and others... you always got a option to delete the history..
anu.cool said:
hi,
I downloaded your tweak..
I m on stock rom,Samsung galaxy s4,if you know,Samsung introduced a new Knox bootloader which records if anything alien happens to phone,like custom recovery it flashing or other things
so I just wanted to know if its safe to flash it via android stock recovery or not?
Click to expand...
Click to collapse
jacksparao said:
I use S4 and Note3, I using the tweaks in both phones.. really enjoying the experience..
Its your wish to use or not.. Once you flash your image to stock image all the data will be erased.. its one impossible concept to record the flashing stuff and others... you always got a option to delete the history..
Click to expand...
Click to collapse
i m unrooted, and dont want to trip the flag, which will void my warranty, and thats what i wanted to confirm, if i install update.zip from android stock recovery, will it void my warranty in any way?
kind of No
I can say yes and no.... Most of the time yes... Quit hard to findout weather you used tweaks... So you can use....
anu.cool said:
i m unrooted, and dont want to trip the flag, which will void my warranty, and thats what i wanted to confirm, if i install update.zip from android stock recovery, will it void my warranty in any way?
Click to expand...
Click to collapse
I have a HTC one, no unlocked boot loader, do I need to unlock boot loader to flash the zip?
Sent from my HTC One using xda app-developers app
Hi guys.
I am on CM13, I download a CWM apk and accidentally pressed fix permission. Now no matter how I clean install a rom or format and using a kernel I am still unable to run to at normal speed.
I tried using Root browser, Currently Min is 300000 and max is 1190400.
I have tried using different apks to change governor and speed, but it still doesn't work.
please help me.
Pics are below. A few topics below.
exige said:
Hi guys.
I am on CM13, I download a CWM apk and accidentally pressed fix permission. Now no matter how I clean install a rom or format and using a kernel I am still unable to run to at normal speed.
I tried using Root browser, Currently Min is 300000 and max is 1190400.
I have tried using different apks to change governor and speed, but it still doesn't work.
please help me.
Click to expand...
Click to collapse
If clean flashing the rom and flashing a new kernel doesn't work, you could flash the factory images again. It's a last resort but guaranteed to fix anything and everything bar hardware stuff.
I tried the hammerhead restore to stock rom. It didn't work. Are there others i do not know of?
exige said:
I tried the hammerhead restore to stock rom. It didn't work. Are there others i do not know of?
Click to expand...
Click to collapse
I'm not exactly sure what you meant by "hammerhead restore to stock rom" but what I meant was flashing the images from here > https://developers.google.com/android/images
pingu11 said:
I'm not exactly sure what you meant by "hammerhead restore to stock rom" but what I meant was flashing the images from here > https://developers.google.com/android/images
Click to expand...
Click to collapse
Thank you so much for the link. I tried TWRP file system fix. I hope it works.
mpdesicion manages max clock for you, you are just checking max clock when all 4 cores are running
GR0S said:
mpdesicion manages max clock for you, you are just checking max clock when all 4 cores are running
Click to expand...
Click to collapse
Hi I have done a factory rom install as suggested. It didn't work. Now I am back on CM13 lastest snapshot.
I cannot move above 1190mhz and also I cannot change the governor.
Kindly see the attached pic. I tried stopping the mpdecision also and same result.
I hope Someone could help me out. Thank you.
exige said:
Thank you so much for the link. I tried TWRP file system fix. I hope it works.
Click to expand...
Click to collapse
I have no idea what the file system fix does to be honest. Did you flash all partitions again?
pingu11 said:
I have no idea what the file system fix does to be honest. Did you flash all partitions again?
Click to expand...
Click to collapse
Yes i have. I done all formats.
Try sliding the Thermal slider all the way to the right side. It worked for me, because i believe there is some kind of heat detector sort of thing and after triggering it lowers the cpu freq till the phone cools down