Related
hello guys ... sorry but i don't know what's best rom for galaxy fit
just need good rom and every thing work well .
i have galaxy w .. and i flash cm9b4 !! it's very good but i don't galaxy fit can flash cm9 or no !!
i'm waiting ur ideas guys .. thank all
or any one have stock rom 2.3.6 arabic
dodora3d said:
hello guys ... sorry but i don't know what's best rom for galaxy fit
just need good rom and every thing work well .
i have galaxy w .. and i flash cm9b4 !! it's very good but i don't galaxy fit can flash cm9 or no !!
i'm waiting ur ideas guys .. thank all
Click to expand...
Click to collapse
Best Rom threads are prohitbited on XDA..
pl read the Rule before you post.
for your quetion.
try official CM7 it works fine with evrything working.
FIT havn't yet got CM9(and even never) but you can try yajnab's CM10 its almost fully working..:good:
Janas rom latest version has Arabic , stock rom 2.3.6 for Region Iran has Arabic too , u can get it from samfirmware.com
Rohit02 said:
Best Rom threads are prohitbited on XDA..
pl read the Rule before you post.
for your quetion.
try official CM7 it works fine with evrything working.
FIT havn't yet got CM9(and even never) but you can try yajnab's CM10 its almost fully working..:good:
Click to expand...
Click to collapse
sry con i don't read rule ..
i'll flash cm7 what's best version ?
dodora3d said:
sry con i don't read rule ..
i'll flash cm7 what's best version ?
Click to expand...
Click to collapse
CM7 20121202 release. we get updates every sunday..
thnak you can u give me link ?
what's defferient between every sunday
i find link .. can u till me how install it ?
you must have Gingerbread and cwm recovery installed first of all
then
follow these steps
backup your current custom rom ( just to be safe ) .
wipe data/ reset
format system
wipe dalvik cache
install zip from sd card
and reboot
Sent from my GT-S5670 using xda premium
soham jambhekar said:
you must have Gingerbread and cwm recovery installed first of all
then
follow these steps
backup your current custom rom ( just to be safe ) .
wipe data/ reset
format system
wipe dalvik cache
install zip from sd card
and reboot
Sent from my GT-S5670 using xda premium
Click to expand...
Click to collapse
thank you ..
This how to flash a stock rom :
http://www.youtube.com/watch?v=JATv50RdrHM
that firmware has arabic , (STOCK)
http://www.hotfile.com/dl/168038295/986e9d9/S5670JPKT4_S5670OJPKT1_THR.zip.html
no need to pull the battery out , after rebooting hold home key + power key and make a factory reset then reboot again
soham jambhekar said:
you must have Gingerbread and cwm recovery installed first of all
then
follow these steps
backup your current custom rom ( just to be safe ) .
wipe data/ reset
format system
wipe dalvik cache
install zip from sd card
and reboot
Sent from my GT-S5670 using xda premium
Click to expand...
Click to collapse
sorry but when i take backup i don't sure if take it or no ! where's find the backup ! and what's name files find?
sorry for bad english
coz i don't sure on cwm ! i think not working well !
my rom now . gb 2.3.4
http://forum.xda-developers.com/showpost.php?p=24719114&postcount=1387
anyone try this cwm ?!!
dodora3d said:
http://forum.xda-developers.com/showpost.php?p=24719114&postcount=1387
anyone try this cwm ?!!
Click to expand...
Click to collapse
You're making it difficult for yourself ! Flash that stock rom , it has Arabic ,,, then if you want CWM recovery , go for TJ Style's CWM and flash it using Odin pc ,, any other cwm may brick your phone
samo_gf said:
You're making it difficult for yourself ! Flash that stock rom , it has Arabic ,,, then if you want CWM recovery , go for TJ Style's CWM and flash it using Odin pc ,, any other cwm may brick your phone
Click to expand...
Click to collapse
thank you ... but that's not problem what rom i flash .. but when i take backup !
btw i'm egyption too
:good:
i flash stock rom thank you are u use mod or tweaks ?
dodora3d said:
i flash stock rom thank you are u use mod or tweaks ?
Click to expand...
Click to collapse
I'm using janas rom , lots of tweaks and customizations . For stock rom u can root it and delete unwanted apps for more free space and ram , also u can flash slaidyboost script . It has some good tweaks but I'm not sure if it could be flashed over stock rom or not !
dodora3d said:
hello guys ... sorry but i don't know what's best rom for galaxy fit
just need good rom and every thing work well .
i have galaxy w .. and i flash cm9b4 !! it's very good but i don't galaxy fit can flash cm9 or no !!
i'm waiting ur ideas guys .. thank all
Click to expand...
Click to collapse
u have galaxy w not fit then u might be in a wrong forum
speed_bot said:
u have galaxy w not fit then u might be in a wrong forum
Click to expand...
Click to collapse
no i have galaxy w ! but my sister have fit not wrong forum
thnQ u
Hello all,
I have started a new project to provide miui to those XPERIA devices which are not supported by miui team.
This ROM will be as light as possible(Perfect miui)
CX-MIUI Project
The currently supported devices are:
Xperia J
Xperia Acro S
Xperia Ion
Downloads:
Project Home
Currently i am providing ported 3.3.29 beta test builds from Xperia Arc S.
Need some feedbacks about bugs and the performance of the rom so that i can fix in upcoming versions !
Also I need a tester who can test ROM before release PM me if anyone can
How to Install:
-First of all you need a unlocked bootloader as miui is based on cyannogenmod
-If you have CWM then :
*Wipe data
*Wipe cache
*Go to advanced - Wipe Dalvik cache
*Mounts and Storage - Format system
*Flash the Rom.zip
-If you don't have CWM then:
# Open rom.zip flash the boot.img in it using fastboot
#Reboot phone and violet light will blink for 3" in that you should press vol up(+) and you will enter CWM mode
Then follow the above ' * ' part for installing zip
reserved
how to install ??SIR
can u give the procedure ?please i want to try
I am using Xperia J With Unlock bootloader With ICS FW
ill flash tomorrow and let u know about the rom for sure
freakzapster said:
how to install ??SIR
can u give the procedure ?please i want to try
I am using Xperia J With Unlock bootloader With ICS FW
Click to expand...
Click to collapse
How to flash updated !
It is same like how you flash fxp cm10
its giving flashing cant flash the zip its giving error 7 what to do ?????
freakzapster said:
its giving flashing cant flash the zip its giving error 7 what to do ?????
Click to expand...
Click to collapse
Check file again thats u give perm in Updaterscript
Means what
What is the advantage?
Sent from my ST26i using xda app-developers app
I hope you won't block your phone like I did it during MIUI porting, now my Xperia J doesn't recognize any sim cards, sth like chinesse sim lock
would like to try this but any bugs reports guys?
mikey000 said:
would like to try this but any bugs reports guys?
Click to expand...
Click to collapse
+1. I am also looking for a very brief review about this ROM. I am using the official MIUI v5 for S3 now, and looking for this ROM for my sister's phone. Is it stable enough for daily usage?
sawari said:
+1. I am also looking for a very brief review about this ROM. I am using the official MIUI v5 for S3 now, and looking for this ROM for my sister's phone. Is it stable enough for daily usage?
Click to expand...
Click to collapse
i'm on CM10 fxp215 xperia J and trying to install this but it can't
Bumping this to say, Any 1 with script errors, Replace your updater-script and update-binary from META-INF\google\android (or something like that) with the one from latest FXP CM10 Release, It works but how well i can not say.
Good try!
Thumbs up for the port! :good: tried it on xperia J today...
but has lot of bugs
you have to use updater script from latest CM10 and replace it in this MIUI zip to work (else it wil show ststus 7 error)
Bugs:
>phone,contacts,music player and even home launcher FCs
>reboots when awaken from lock
>random lags (may be coz of kernel)
Overall > cant use it now! has lot of bugs!
We have to wait for the dev to update and fix the bugs :good:
Awsome Attempt though! looks beautiful! :highfive:
Waiting for next update :fingers-crossed:
I had 90% working MIUIv4/5 but I gave up with that project and deleted everything I done for jlo ^^
Glad my suggestion worked, regardless of how well.
lozohcum said:
I had 90% working MIUIv4/5 but I gave up with that project and deleted everything I done for jlo ^^
Click to expand...
Click to collapse
Not sure why you was thanked for this comment but ok , Any 1 here wanna fix it my friend really wants MIUI and im just a contributor not developer
Have you copied every additional libs from MIUI's system/lib to your PORT? If you didn't, do it and then check if you have still all FCs.
If Phone crashes and you have reboots you should start again from scratch and very carefully do the diffing and smails replacement. Probably you used wrong base or did sth wrongly or forgot about part of porting. Have you patched RIL? Phone Factory? You should also try to take MIUI for SGS as base for porting.
Taking updater script from FXP isn't enough, you have to add some lines to it to make MIUI working well.
I can start porting MIUI4/5 for jlo again but I need a rom tester for this device.
ah and one thing, it's hard to fix MIUI Home FC, you should download the newest MI Home from Google Play Store and put it into your port. It should help a lot, it helped me.
Good luck with porting. I will try to help you if I will be able to
I see he just change his device to Galaxy Grand Duos (GT-i9802)..
Sent from my ST26i using Tapatalk 2
All Dear Senior Members please guide me for the best and totally bug free customised 4.2.2 ROM for Micromax A110 in which all features of the device work smooth? And, also instruct me in installing a Custom 4.2.2 Jelly Bean Rom on my device which is presently running the Official 4.1.1 Jelly Bean ROM. Thank You!
saalikrao said:
All Dear Senior Members please guide me for the best and totally bug free customised 4.2.2 ROM for Micromax A110 in which all features of the device work smooth? And, also instruct me in installing a Custom 4.2.2 Jelly Bean Rom on my device which is presently running the Official 4.1.1 Jelly Bean ROM. Thank You!
Click to expand...
Click to collapse
u can choose from here - http://forum.xda-developers.com/showthread.php?t=2172561 thread by iamnimit. there r many stable roms available like miui, darknexus, ultimate galaxy, lego ice fusion, lego ice, etc., i'm currently on ultimate galaxy v3 rom with revised-1gbram swap & letest kernel v 3.4.78.
if u need more help, just post below
How to Flash Ultimate Galaxy V3 Rom
Sir firstly tell me If the Camera(front and rear),Bluetooth, Wifi, Radio, Sms, OTG, 3G ,GPS, etc works smoothly on this Ultimate Galaxy v3 rom by default? Or there is need to flash some other files after flashing this ROM to make all these above said functions work?? And secondly , tell me how to flash this Kernel?? Thank You!
saalikrao said:
Sir firstly tell me If the Camera(front and rear),Bluetooth, Wifi, Radio, Sms, OTG, 3G ,GPS, etc works smoothly on this Ultimate Galaxy v3 rom by default? Or there is need to flash some other files after flashing this ROM to make all these above said functions work?? And secondly , tell me how to flash this Kernel?? Thank You!
Click to expand...
Click to collapse
Every things work well..bt 1st i cant say about otg cos i dont use it. 2nd there was minor prob in fm app u need to flash a patch if u want fm app. i dont flash it cos i dont want to use fm, thats not a big prob. 3rd thing for kernel we cant gave u link at here due to forum rules.
i can help u for flashing kernel, its very simple process like flashing any thing from cwm/twrp recovery.
1. u need to root ur phone & install cwm or twrp recovery
if u have it already skip step 1.
2. download latest kernel which support ur phone. 3.4.67 or above with ur desire rom ver like 4.1.x or 4.2.x
3. copy zip file to sd card.
4. now reboot ur phone into recovery by holding vol up + vol down + power keys
5. into recovery mod choose install/update via sdcard
6. find the kernel zip file & Install it.
7. reboot ur phone & enjoy.
u can check ur kernel ver in about device in settings.
Sdk_Zone said:
Every things work well..bt 1st i cant say about otg cos i dont use it. 2nd there was minor prob in fm app u need to flash a patch if u want fm app. i dont flash it cos i dont want to use fm, thats not a big prob. 3rd thing for kernel we cant gave u link at here due to forum rules.
i can help u for flashing kernel, its very simple process like flashing any thing from cwm/twrp recovery.
1. u need to root ur phone & install cwm or twrp recovery
if u have it already skip step 1.
2. download latest kernel which support ur phone. 3.4.67 or above with ur desire rom ver like 4.1.x or 4.2.x
3. copy zip file to sd card.
4. now reboot ur phone into recovery by holding vol up + vol down + power keys
5. into recovery mod choose install/update via sdcard
6. find the kernel zip file & Install it.
7. reboot ur phone & enjoy.
u can check ur kernel ver in about device in settings.
Click to expand...
Click to collapse
Sir It means I have to first flash the kernel and then after doing that I will be able to flash the Ultimate Galaxy V3 Rom? and tell me which is the best kernel for running Ultimate Galaxy v3 rom?
saalikrao said:
Sir It means I have to first flash the kernel and then after doing that I will be able to flash the Ultimate Galaxy V3 Rom? and tell me which is the best kernel for running Ultimate Galaxy v3 rom?
Click to expand...
Click to collapse
Yes Brother, u need flash kernel before flashing any 4.2.X rom. & the best kernel ver for ultimate galaxy v3 rom is 3.4.73, 3.4.78.
Sdk_Zone said:
Every things work well..bt 1st i cant say about otg cos i dont use it. 2nd there was minor prob in fm app u need to flash a patch if u want fm app. i dont flash it cos i dont want to use fm, thats not a big prob. 3rd thing for kernel we cant gave u link at here due to forum rules.
i can help u for flashing kernel, its very simple process like flashing any thing from cwm/twrp recovery.
1. u need to root ur phone & install cwm or twrp recovery
if u have it already skip step 1.
2. download latest kernel which support ur phone. 3.4.67 or above with ur desire rom ver like 4.1.x or 4.2.x
3. copy zip file to sd card.
4. now reboot ur phone into recovery by holding vol up + vol down + power keys
5. into recovery mod choose install/update via sdcard
6. find the kernel zip file & Install it.
7. reboot ur phone & enjoy.
u can check ur kernel ver in about device in settings.
Click to expand...
Click to collapse
Sdk_Zone said:
Yes Brother, u need flash kernel before flashing any 4.2.X rom. & the best kernel ver for ultimate galaxy v3 rom is 3.4.73, 3.4.78.
Click to expand...
Click to collapse
Ok Sir I will strictly follow your instructions. And, if at any point your help is needed I will surely disturb you again ..lolz ..thanks a lot
saalikrao said:
Ok Sir I will strictly follow your instructions. And, if at any point your help is needed I will surely disturb you again ..lolz ..thanks a lot
Click to expand...
Click to collapse
Bro its my pleasure to help MMX Device users. it's not a disturbance to me, be desi use desi.
Hit Thanks if I helped U.
what is Ram Swap
Sdk_Zone said:
Bro its my pleasure to help MMX Device users. it's not a disturbance to me, be desi use desi.
Hit Thanks if I helped U.
Click to expand...
Click to collapse
Sir I forgot to ask you about The "RAM SWAP" mentioned by you? what is this and how to make this work?
saalikrao said:
Sir I forgot to ask you about The "RAM SWAP" mentioned by you? what is this and how to make this work?
Click to expand...
Click to collapse
Ooups....Sorry forget to tell about it....u can download it from here...http://forum.xda-developers.com/showthread.php?t=2531124 by saurabh0291 & the installation process is also there it works on swap support kernel only. which is i provide u.. both are support swap feature.
Sdk_Zone said:
Ooups....Sorry forget to tell about it....u can download it from here...http://forum.xda-developers.com/showthread.php?t=2531124 by saurabh0291 & the installation process is also there it works on swap support kernel only. which is i provide u.. both are support swap feature.
Click to expand...
Click to collapse
It means i have to first install the kernel, than the Ultimate Galaxy v3 rom and then this Ram Swap Feature in order to get 1 GB Ram??
saalikrao said:
It means i have to first install the kernel, than the Ultimate Galaxy v3 rom and then this Ram Swap Feature in order to get 1 GB Ram??
Click to expand...
Click to collapse
Yes Bro, Try it... u can use this swap feature on any mmx roms with supported kernels.
Sdk_Zone said:
Yes Bro, Try it... u can use this swap feature on any mmx roms with supported kernels.
Click to expand...
Click to collapse
Ok
firstly i am going to flash all these stuff in my device .And then will tell u about my experience soon ..Take Care Bro and thank you !!
saalikrao said:
Ok
firstly i am going to flash all these stuff in my device .And then will tell u about my experience soon ..Take Care Bro and thank you !!
Click to expand...
Click to collapse
Ok....sure Bro.. try it...n let me know ur experience soon...take care & hit thanks button
best roms
hey bro! try sagarwap's legoice fusion v3 (released on 5/2/14) its the best rom according to me ,i'm using it ,it works great ,no lag ,lots of free ram,
and the attractive point best samsung interface provided by any rom (according to me).all others details u can find at the thread. hit thanks if my post helped
---------- Post added at 04:10 AM ---------- Previous post was at 04:04 AM ----------
if you like u can also try legoice turbo v3.1 (runs on 4.2.1 ),it gives the latest micromax turbo interface experience with amazing features like icall and isms (floating sms and call), a lots of smart gestures,and always 200+ free ram on first reboot. you can surely try this, u won;t regret flashing this rom, second best rom by sagarwap according to me . Note: i hav used both the roms and reviewing according to my experience. Please hit thanks if my post helped u.
Sdk_Zone said:
Ooups....Sorry forget to tell about it....u can download it from here...http://forum.xda-developers.com/showthread.php?t=2531124 by saurabh0291 & the installation process is also there it works on swap support kernel only. which is i provide u.. both are support swap feature.
Click to expand...
Click to collapse
@Sdk_Zone
can i follow the instruction there? since i have flash sagarwap's legoice fusion v3 and suvi booster script but i still feel laggy on my phone. im currently on xtreme - zeal 3.4.x kernel
tamhar said:
@Sdk_Zone
can i follow the instruction there? since i have flash sagarwap's legoice fusion v3 and suvi booster script but i still feel laggy on my phone. im currently on xtreme - zeal 3.4.x kernel
Click to expand...
Click to collapse
Yes, Why not?? Sure u can try it. all the thing u have on ur device just go ahead n try.
Sdk_Zone said:
Yes, Why not?? Sure u can try it. all the thing u have on ur device just go ahead n try.
Click to expand...
Click to collapse
good
In every 4.2.2 rom they say,if u r on 4.1x you need to flash kernel.Can anyone tell me how to flash kernel(4.2)?
Currently my canvas 2 is running on 4.1.1(CanXperia rom).
Rik.shohag said:
In every 4.2.2 rom they say,if u r on 4.1x you need to flash kernel.Can anyone tell me how to flash kernel(4.2)?
Currently my canvas 2 is running on 4.1.1(CanXperia rom).
Click to expand...
Click to collapse
Ya sure download the latest kernel
copy it to sd card
reboot ur device into recovery mode
install/flash zip from sd card
select & install kernel's zip file
reboot in normal mode & enjoy
I have a Canvas 2 on which I would like to install a custom rom specifically ([ROM] [JB 4.2.2] ---***Ultimate Galaxy V4 [New Updated]***--- Note 3 + S5 UI) this one. I have read and researched a lot but I'm stuck at the point where it says "This ROM is Without Kernel. You Need To Flash Kernel If U R On 4.1.x. If U R on 4.2.x Then No Need To Flash Kernel"
I have rooted my phone, installed CWM Recovery but I'm not able to verify my kernel version.. On my phone it shows kernel version "3.0.13" and android version "4.0.4" ICS. Do I need to flash a new kernel? Where can I find the new kernel and how to flash it? I don't want to brick my phone by installing the above custom ROM on an incorrect kernel.
rohitdas28 said:
I have a Canvas 2 on which I would like to install a custom rom specifically ([ROM] [JB 4.2.2] ---***Ultimate Galaxy V4 [New Updated]***--- Note 3 + S5 UI) this one. I have read and researched a lot but I'm stuck at the point where it says "This ROM is Without Kernel. You Need To Flash Kernel If U R On 4.1.x. If U R on 4.2.x Then No Need To Flash Kernel"
I have rooted my phone, installed CWM Recovery but I'm not able to verify my kernel version.. On my phone it shows kernel version "3.0.13" and android version "4.0.4" ICS. Do I need to flash a new kernel? Where can I find the new kernel and how to flash it? I don't want to brick my phone by installing the above custom ROM on an incorrect kernel.
Click to expand...
Click to collapse
hmm....okey first of all u on 4.0.4 its ics..no prob buddy.. u need to flash kernel for every new version of android..that line where u stuck it says if ur device android ver is 4.1.X (X means ver like 1 or 2 or 3 eg:4.1.1) then u need to flash kernel for ver 4.2.X for flashing ultimate galaxy rom on ur device..ultimate galaxy v4's version is 4.2.2..and of-course u r on ics than that compulsory need to flash letest kernel..
for kernel u can try bindass boost kernel on ur device - http://forum.xda-developers.com/showthread.php?t=2683095
there's all kernel what u need if u wanna flash 4.1 rom then download 4.1 kernel or if u wanna 4.2 rom then download 4.2 kernel & flash it on ur device
hit thanks if i helped u
Sdk_Zone said:
hmm....okey first of all u on 4.0.4 its ics..no prob buddy.. u need to flash kernel for every new version of android..that line where u stuck it says if ur device android ver is 4.1.X (X means ver like 1 or 2 or 3 eg:4.1.1) then u need to flash kernel for ver 4.2.X for flashing ultimate galaxy rom on ur device..ultimate galaxy v4's version is 4.2.2..and of-course u r on ics than that compulsory need to flash letest kernel..
for kernel u can try bindass boost kernel on ur device - http://forum.xda-developers.com/showthread.php?t=2683095
there's all kernel what u need if u wanna flash 4.1 rom then download 4.1 kernel or if u wanna 4.2 rom then download 4.2 kernel & flash it on ur device
hit thanks if i helped u
Click to expand...
Click to collapse
hi.. thanks for the tip.. I have successfully installed 4.1.1 stock on canvas 2.. now I want to install a 4.2.x rom with kernel.. is that it or only installing a 4.2.2 kernel is enough to do it..??
rohitdas28 said:
hi.. thanks for the tip.. I have successfully installed 4.1.1 stock on canvas 2.. now I want to install a 4.2.x rom with kernel.. is that it or only installing a 4.2.2 kernel is enough to do it..??
Click to expand...
Click to collapse
hurrey....u now on 4.1.1 k....bt buddy if u wanna flash 4.2.X rom then also want to flash the 4.2.X kernel..if u dont flash it then many prob can pop on ur device or u may brick or ur device can be bootlooped....if u r on 4.2.X kernel then u can use ur old ver of android like 4.1.1 rom on 4.2.x kernel..
ok for flashing rom
1st flash letest kernel then rom it will good & safe for booting ur new rom in ur device..
if u just flash the kernel than it will be ok & u may flash rom at any time in future..
hit thanks if i helped u...
Sdk_Zone said:
hurrey....u now on 4.1.1 k....bt buddy if u wanna flash 4.2.X rom then also want to flash the 4.2.X kernel..if u dont flash it then many prob can pop on ur device or u may brick or ur device can be bootlooped....if u r on 4.2.X kernel then u can use ur old ver of android like 4.1.1 rom on 4.2.x kernel..
ok for flashing rom
1st flash letest kernel then rom it will good & safe for booting ur new rom in ur device..
if u just flash the kernel than it will be ok & u may flash rom at any time in future..
hit thanks if i helped u...
Click to expand...
Click to collapse
okay.. understood.. how to flash only the kernel? in the CWM Receovery Mode I could not find the option for flashing kernel only.. or am I doing it wrong? I am using this kernel..I am going to use X****** is this correct cos there are two download options one for 4.1.x and for 4.2.x and I have downloaded 4.2.x.. can I flash this on my 4.1.1 ROM? Please explain how to flash the kernel..
rohitdas28 said:
okay.. understood.. how to flash only the kernel? in the CWM Receovery Mode I could not find the option for flashing kernel only.. or am I doing it wrong? I am using this kernel..I am going to use Xtreme-Rejoice-4.2.x-3.4.82 is this correct cos there are two download options one for 4.1.x and for 4.2.x and I have downloaded 4.2.x.. can I flash this on my 4.1.1 ROM? Please explain how to flash the kernel..
Click to expand...
Click to collapse
we cant discuss xtreme kernel here DUE TO GPL Violation....
okey then all kernels & rom installation(Flashing) r same..
download rom or kernel's zip file n
copy that zip file to ur device's sd card
now boot to recovery mode(what ever u have..like cwm, twrp, ctr, etc.)
goto install/update from sd card
find ur zip file there & select it.
install it n reboot ur device..
hit thanks if i helped u
Sdk_Zone said:
we cant discuss xtreme kernel here DUE TO GPL Violation....
okey then all kernels & rom installation(Flashing) r same..
download rom or kernel's zip file n
copy that zip file to ur device's sd card
now boot to recovery mode(what ever u have..like cwm, twrp, ctr, etc.)
goto install/update from sd card
find ur zip file there & select it.
install it n reboot ur device..
hit thanks if i helped u
Click to expand...
Click to collapse
ummm.. so if I simply copy the kernel and run it from CWM it'll load a 4.2.x kernel without affecting my 4.1.1.rom?
rohitdas28 said:
ummm.. so if I simply copy the kernel and run it from CWM it'll load a 4.2.x kernel without affecting my 4.1.1.rom?
Click to expand...
Click to collapse
yes buddy u got it....if u stuck on bootloop...then just goto recovery mode back once .. wipe cache & dalvik cache once then reboot ur device..it will not change any thing in ur rom
hit thanks if i helped u
Sdk_Zone said:
yes buddy u got it....if u stuck on bootloop...then just goto recovery mode back once .. wipe cache & dalvik cache once then reboot ur device..it will not change any thing in ur rom
hit thanks if i helped u
Click to expand...
Click to collapse
thanks!!! that worked wonderfully..... now I'm on kernel 3.4.82... this means I can install my desired custom rom of 4.2.x... one last question, after I install the galaxy ROM and want to change to say nexus rom.. should I revert back to ICS or JB 4.1.1 STOCK or simply install the new ROM over the old one without changing anything?
rohitdas28 said:
thanks!!! that worked wonderfully..... now I'm on kernel 3.4.82... this means I can install my desired custom rom of 4.2.x... one last question, after I install the galaxy ROM and want to change to say nexus rom.. should I revert back to ICS or JB 4.1.1 STOCK or simply install the new ROM over the old one without changing anything?
Click to expand...
Click to collapse
u welcome bro
no buddy no need to revert bak to stock....just follow instruction which is written on thread....
if device is bricked then u need to flash stock rom to ur device using sp flash tool...
hit thanks if i helped u
I've flashed many many Roms,(color rom, MIUI. etc) the latest being the JMP Chili Rom and my camera does not work in all of them. It says, cannot connect to camera. I've already flashed the Binass kernel, but maybe I flashed it wrong? Is there something I need to do? Please help me out, thank you so much in advance.
Dave
Loathe said:
I've flashed many many Roms,(color rom, MIUI. etc) the latest being the JMP Chili Rom and my camera does not work in all of them. It says, cannot connect to camera. I've already flashed the Binass kernel, but maybe I flashed it wrong? Is there something I need to do? Please help me out, thank you so much in advance.
Dave
Click to expand...
Click to collapse
Reflash proper Rom package with Proper Kernal File And Patches (if Any)
Regards
Hit thx if i help u
SMARTY BOY said:
Reflash proper Rom package with Proper Kernal File And Patches (if Any)
Regards
Hit thx if i help u
Click to expand...
Click to collapse
You mean flash again with the same ROM and kernel that I have just flashed? Ok I'll try that out but not sure how that will help.
Bro U flash Patches too if their is Any
Hit thx if i helped u
Sent from my Micromax A110 using Tapatalk
Bro I did everything mentioned here still no camera. What do?
Loathe said:
I've flashed many many Roms,(color rom, MIUI. etc) the latest being the JMP Chili Rom and my camera does not work in all of them. It says, cannot connect to camera. I've already flashed the Binass kernel, but maybe I flashed it wrong? Is there something I need to do? Please help me out, thank you so much in advance.
Dave
Click to expand...
Click to collapse
right now which rom are you using ?
4.1.x or 4.2.x ??
ashish_zarekar said:
right now which rom are you using ?
4.1.x or 4.2.x ??
Click to expand...
Click to collapse
I'm using the JMP Chili Rom 4.2.1
thanks for replying, I would really appreciate any help
kernel link
Loathe said:
I'm using the JMP Chili Rom 4.2.1
thanks for replying, I would really appreciate any help
Click to expand...
Click to collapse
i was also facing same problem but after flashing this kernel all problems get solved.
here is link
ashish_zarekar said:
i was also facing same problem but after flashing this kernel all problems get solved.
here is link
Click to expand...
Click to collapse
Do you have to wipe cache/dalvik or anything else after flashing this kernel? I have flashed it too, but only the front camera is working.
when do you flash it? right after flashing ROM? Can I do it now that my phone is up and running? or do I have to reflash the rom too?
Thanks so much for replying.
Loathe said:
Do you have to wipe cache/dalvik or anything else after flashing this kernel? I have flashed it too, but only the front camera is working.
when do you flash it? right after flashing ROM? Can I do it now that my phone is up and running? or do I have to reflash the rom too?
Thanks so much for replying.
Click to expand...
Click to collapse
SkipDeath said:
Same problem with me except I don't have an out of box jb mobile , I have tried each and everything but nothing seems to help
Click to expand...
Click to collapse
1.Go to recovery
2.clear dalvik cache
3.Flash this kernel.
4.reboot in recovery.
5. flash your rom
6. clear dalvik cache
7. flash kernel
8.reboot.
it work for me.
i am on suvi 16. and all stuff work properly besides screen problem
why don't you try this rom to check camera is working or not. i love to use this rom.
you should try this rom
ashish_zarekar said:
1.Go to recovery
2.clear dalvik cache
3.Flash this kernel.
4.reboot in recovery.
5. flash your rom
6.reboot.
it work for me.
i am on suvi 16. and all stuff work properly besides screen problem
why don't you try this rom to check camera is working or not. i love to use this rom.
you should try this rom
Click to expand...
Click to collapse
could you please provide link to this rom?
Thanks so much in advance
Same problem with me except I don't have an out of box jb mobile , I have tried each and everything but nothing seems to help
Camera not working in 4.2 roms - solution
Hi,
Now, are you on a micromax A110 that came with jellybean by default when you bought it (referred to as jb out of the box). If so
1. the new unified bindassboost 4.2 kernel by bindass dost supports camera in jb out of the box devices. flash that while flashing the rom and it should be okay. here is the link to the thread. http://forum.xda-developers.com/showthread.php?t=2683095
These are the steps I usually use when flashing,
1. wipe data, wipe dalvik cache (in advanced options)
2. go to mounts and storage and format system
3. install the rom zip
4. install any patches, if provided (although I usually boot the first time, see if the patch is necessary and then if so, install)
5. install bindassboost 4.2 kernel
6. reboot:highfive:
Note: the above instructions are for 4.2 roms only. For 4.1 you can skip step 5.
As for 4.2 Roms, there are
1 http://forum.xda-developers.com/showthread.php?t=2025391 (JMP chilli)
2 http://forum.xda-developers.com/showthread.php?t=2748464 (ARB)
3 http://forum.xda-developers.com/showthread.php?t=2772691 (Fusion radiator)
4 http://forum.xda-developers.com/showthread.php?t=2772399 (catsdroid ... I loved this one
5 http://forum.xda-developers.com/showthread.php?t=2729267 (LBA)
6 http://forum.xda-developers.com/showthread.php?t=2740980 (Ultimate aspire ... good one)
just to name a few. I'm not going to give the links for all the others because it's late and I've got college tomorrow:crying:
I'll just give you the names,
0. MERE rom v2 (very good one)
1. note 3 by parthroxx
2. samsung ...um s4 or something by parthroxx
3. walton rgt
4. colour os by [email protected] (not the other one by avenger4droud, its got too many bugs and takes a long time to take care of em all)
5. monster os by pradeep maddy (got a little bug though. cant place widgets)
6. All miui roms (I'd advise you to avoid them, because on jb out of the box (I'm not sure about others) they lag like hell and you cant transfer apps to the sd card (4.2 roms. In 4.1 mi there was no camera focus)
7. there are 2 xperia based ones. Both have bugs. in one camera doesn't focus. the other gives a lot of fc's
Personally, i prefer 4.1 roms though. It seems 4.2 lags a bit on jb out of the box:crying: as far as I've tried.
23
sarvajith said:
Hi,
Now, are you on a micromax A110 that came with jellybean by default when you bought it (referred to as jb out of the box). If so
1. the new unified bindassboost 4.2 kernel by bindass dost supports camera in jb out of the box devices. flash that while flashing the rom and it should be okay. here is the link to the thread. http://forum.xda-developers.com/showthread.php?t=2683095
These are the steps I usually use when flashing,
1. wipe data, wipe dalvik cache (in advanced options)
2. go to mounts and storage and format system
3. install the rom zip
4. install any patches, if provided (although I usually boot the first time, see if the patch is necessary and then if so, install)
5. install bindassboost 4.2 kernel
6. reboot:highfive:
Note: the above instructions are for 4.2 roms only. For 4.1 you can skip step 5.
As for 4.2 Roms, there are
1 http://forum.xda-developers.com/showthread.php?t=2025391 (JMP chilli)
2 http://forum.xda-developers.com/showthread.php?t=2748464 (ARB)
3 http://forum.xda-developers.com/showthread.php?t=2772691 (Fusion radiator)
4 http://forum.xda-developers.com/showthread.php?t=2772399 (catsdroid ... I loved this one
5 http://forum.xda-developers.com/showthread.php?t=2729267 (LBA)
6 http://forum.xda-developers.com/showthread.php?t=2740980 (Ultimate aspire ... good one)
just to name a few. I'm not going to give the links for all the others because it's late and I've got college tomorrow:crying:
I'll just give you the names,
0. MERE rom v2 (very good one)
1. note 3 by parthroxx
2. samsung ...um s4 or something by parthroxx
3. walton rgt
4. colour os by [email protected] (not the other one by avenger4droud, its got too many bugs and takes a long time to take care of em all)
5. monster os by pradeep maddy (got a little bug though. cant place widgets)
6. All miui roms (I'd advise you to avoid them, because on jb out of the box (I'm not sure about others) they lag like hell and you cant transfer apps to the sd card (4.2 roms. In 4.1 mi there was no camera focus)
7. there are 2 xperia based ones. Both have bugs. in one camera doesn't focus. the other gives a lot of fc's
Personally, i prefer 4.1 roms though. It seems 4.2 lags a bit on jb out of the box:crying: as far as I've tried.
Click to expand...
Click to collapse
Thanks so much for your reply bro. So to clarify, if I flash any of the above ROMs with JB out of the box, my camera should work right? Or do I have to flash a 4.1 ROM? If so, which 4.1 ROM would you recommend?
Thanks again Bro.
Loathe said:
could you please provide link to this rom?
Thanks so much in advance
Click to expand...
Click to collapse
here is link for thread SUVI rom just flash this one this is 4.2.x
if you want 4.1.x then flash this one Suvi ROM V15 - TiTan
i am on SUVI 16 bulid 3 which is 4.2.x and its awesome i love this rom. and you will also
don't say just thanks. hit thanks button also brother. if you want any help don't shy to ask
ashish_zarekar said:
here is link for thread SUVI rom just flash this one this is 4.2.x
if you want 4.1.x then flash this one Suvi ROM V15 - TiTan
i am on SUVI 16 bulid 3 which is 4.2.x and its awesome i love this rom. and you will also
don't say just thanks. hit thanks button also brother. if you want any help don't shy to ask
Click to expand...
Click to collapse
'
Bro I cant flash these Roms, always stuck after the message "deleting cache"
T_T
Loathe said:
Thanks so much for your reply bro. So to clarify, if I flash any of the above ROMs with JB out of the box, my camera should work right? Or do I have to flash a 4.1 ROM? If so, which 4.1 ROM would you recommend?
Thanks again Bro.
Click to expand...
Click to collapse
Well, you can pretty much flash any 4.2 Rom as long as you follow my steps and flash the BINDASSBOOST latest version kernel found in the original android development section:victory:
These are just the Roms I've tried out and liked a bit
No you don't have to flash a 4.1 Rom. I was just saying that as far as I had observed ( I own a JB out of the box device), 4.2 Roms seemed to lag a lot. That's why I said I preferred 4.1 Roms. It was just my opinion. You DON'T NEED to flash a 4.1 Rom
If you are stuck at deleting cache during the ROM'S INSTALLATION (after you've pressed install zip), then
1. you may not actually be stuck. In some Roms, the blue bar indicating progress does'nt move uch during installation. So you may think it got stuck.
2. Try changing your recovery. I suggest clockworkmod v 6.0.28. I once used TWRP recovery and it didnot flash any Rom on the first try and kept getting a message saying I had Root problems. Might be something with the recovery
3. The ROM file may be corrupt. Try downloading again. But mostly I think it's first one.
If you're stuck at deleting cache while using the wipe cache option from the recovery, then there is something wrong with your recovery. flash a new one.
Hope I helped!