[Q] Help to identify my kernel - Micromax A110

I have a Canvas 2 on which I would like to install a custom rom specifically ([ROM] [JB 4.2.2] ---***Ultimate Galaxy V4 [New Updated]***--- Note 3 + S5 UI) this one. I have read and researched a lot but I'm stuck at the point where it says "This ROM is Without Kernel. You Need To Flash Kernel If U R On 4.1.x. If U R on 4.2.x Then No Need To Flash Kernel"
I have rooted my phone, installed CWM Recovery but I'm not able to verify my kernel version.. On my phone it shows kernel version "3.0.13" and android version "4.0.4" ICS. Do I need to flash a new kernel? Where can I find the new kernel and how to flash it? I don't want to brick my phone by installing the above custom ROM on an incorrect kernel.

rohitdas28 said:
I have a Canvas 2 on which I would like to install a custom rom specifically ([ROM] [JB 4.2.2] ---***Ultimate Galaxy V4 [New Updated]***--- Note 3 + S5 UI) this one. I have read and researched a lot but I'm stuck at the point where it says "This ROM is Without Kernel. You Need To Flash Kernel If U R On 4.1.x. If U R on 4.2.x Then No Need To Flash Kernel"
I have rooted my phone, installed CWM Recovery but I'm not able to verify my kernel version.. On my phone it shows kernel version "3.0.13" and android version "4.0.4" ICS. Do I need to flash a new kernel? Where can I find the new kernel and how to flash it? I don't want to brick my phone by installing the above custom ROM on an incorrect kernel.
Click to expand...
Click to collapse
hmm....okey first of all u on 4.0.4 its ics..no prob buddy.. u need to flash kernel for every new version of android..that line where u stuck it says if ur device android ver is 4.1.X (X means ver like 1 or 2 or 3 eg:4.1.1) then u need to flash kernel for ver 4.2.X for flashing ultimate galaxy rom on ur device..ultimate galaxy v4's version is 4.2.2..and of-course u r on ics than that compulsory need to flash letest kernel..
for kernel u can try bindass boost kernel on ur device - http://forum.xda-developers.com/showthread.php?t=2683095
there's all kernel what u need if u wanna flash 4.1 rom then download 4.1 kernel or if u wanna 4.2 rom then download 4.2 kernel & flash it on ur device
hit thanks if i helped u

Sdk_Zone said:
hmm....okey first of all u on 4.0.4 its ics..no prob buddy.. u need to flash kernel for every new version of android..that line where u stuck it says if ur device android ver is 4.1.X (X means ver like 1 or 2 or 3 eg:4.1.1) then u need to flash kernel for ver 4.2.X for flashing ultimate galaxy rom on ur device..ultimate galaxy v4's version is 4.2.2..and of-course u r on ics than that compulsory need to flash letest kernel..
for kernel u can try bindass boost kernel on ur device - http://forum.xda-developers.com/showthread.php?t=2683095
there's all kernel what u need if u wanna flash 4.1 rom then download 4.1 kernel or if u wanna 4.2 rom then download 4.2 kernel & flash it on ur device
hit thanks if i helped u
Click to expand...
Click to collapse
hi.. thanks for the tip.. I have successfully installed 4.1.1 stock on canvas 2.. now I want to install a 4.2.x rom with kernel.. is that it or only installing a 4.2.2 kernel is enough to do it..??

rohitdas28 said:
hi.. thanks for the tip.. I have successfully installed 4.1.1 stock on canvas 2.. now I want to install a 4.2.x rom with kernel.. is that it or only installing a 4.2.2 kernel is enough to do it..??
Click to expand...
Click to collapse
hurrey....u now on 4.1.1 k....bt buddy if u wanna flash 4.2.X rom then also want to flash the 4.2.X kernel..if u dont flash it then many prob can pop on ur device or u may brick or ur device can be bootlooped....if u r on 4.2.X kernel then u can use ur old ver of android like 4.1.1 rom on 4.2.x kernel..
ok for flashing rom
1st flash letest kernel then rom it will good & safe for booting ur new rom in ur device..
if u just flash the kernel than it will be ok & u may flash rom at any time in future..
hit thanks if i helped u...

Sdk_Zone said:
hurrey....u now on 4.1.1 k....bt buddy if u wanna flash 4.2.X rom then also want to flash the 4.2.X kernel..if u dont flash it then many prob can pop on ur device or u may brick or ur device can be bootlooped....if u r on 4.2.X kernel then u can use ur old ver of android like 4.1.1 rom on 4.2.x kernel..
ok for flashing rom
1st flash letest kernel then rom it will good & safe for booting ur new rom in ur device..
if u just flash the kernel than it will be ok & u may flash rom at any time in future..
hit thanks if i helped u...
Click to expand...
Click to collapse
okay.. understood.. how to flash only the kernel? in the CWM Receovery Mode I could not find the option for flashing kernel only.. or am I doing it wrong? I am using this kernel..I am going to use X****** is this correct cos there are two download options one for 4.1.x and for 4.2.x and I have downloaded 4.2.x.. can I flash this on my 4.1.1 ROM? Please explain how to flash the kernel..

rohitdas28 said:
okay.. understood.. how to flash only the kernel? in the CWM Receovery Mode I could not find the option for flashing kernel only.. or am I doing it wrong? I am using this kernel..I am going to use Xtreme-Rejoice-4.2.x-3.4.82 is this correct cos there are two download options one for 4.1.x and for 4.2.x and I have downloaded 4.2.x.. can I flash this on my 4.1.1 ROM? Please explain how to flash the kernel..
Click to expand...
Click to collapse
we cant discuss xtreme kernel here DUE TO GPL Violation....
okey then all kernels & rom installation(Flashing) r same..
download rom or kernel's zip file n
copy that zip file to ur device's sd card
now boot to recovery mode(what ever u have..like cwm, twrp, ctr, etc.)
goto install/update from sd card
find ur zip file there & select it.
install it n reboot ur device..
hit thanks if i helped u

Sdk_Zone said:
we cant discuss xtreme kernel here DUE TO GPL Violation....
okey then all kernels & rom installation(Flashing) r same..
download rom or kernel's zip file n
copy that zip file to ur device's sd card
now boot to recovery mode(what ever u have..like cwm, twrp, ctr, etc.)
goto install/update from sd card
find ur zip file there & select it.
install it n reboot ur device..
hit thanks if i helped u
Click to expand...
Click to collapse
ummm.. so if I simply copy the kernel and run it from CWM it'll load a 4.2.x kernel without affecting my 4.1.1.rom?

rohitdas28 said:
ummm.. so if I simply copy the kernel and run it from CWM it'll load a 4.2.x kernel without affecting my 4.1.1.rom?
Click to expand...
Click to collapse
yes buddy u got it....if u stuck on bootloop...then just goto recovery mode back once .. wipe cache & dalvik cache once then reboot ur device..it will not change any thing in ur rom
hit thanks if i helped u

Sdk_Zone said:
yes buddy u got it....if u stuck on bootloop...then just goto recovery mode back once .. wipe cache & dalvik cache once then reboot ur device..it will not change any thing in ur rom
hit thanks if i helped u
Click to expand...
Click to collapse
thanks!!! that worked wonderfully..... now I'm on kernel 3.4.82... this means I can install my desired custom rom of 4.2.x... one last question, after I install the galaxy ROM and want to change to say nexus rom.. should I revert back to ICS or JB 4.1.1 STOCK or simply install the new ROM over the old one without changing anything?

rohitdas28 said:
thanks!!! that worked wonderfully..... now I'm on kernel 3.4.82... this means I can install my desired custom rom of 4.2.x... one last question, after I install the galaxy ROM and want to change to say nexus rom.. should I revert back to ICS or JB 4.1.1 STOCK or simply install the new ROM over the old one without changing anything?
Click to expand...
Click to collapse
u welcome bro
no buddy no need to revert bak to stock....just follow instruction which is written on thread....
if device is bricked then u need to flash stock rom to ur device using sp flash tool...
hit thanks if i helped u

Related

[Q] OTA manual update jelly blast galaxy y

I have flashed the custom rom on my galaxy y which is the jelly blast v3. When i tried to update my rom via ota it says error in downloading update i have 3.0.0 and the rom gives me a message of updating to 3.0.4 what should i do should i mannually update the next version 3.0.1. If yes please tell me how to do it through CWM because i dont have a good knowledge of CWM so please help me how to update next version of jelly blast through clock work mod????
Just flash the zip file ( updater JBV3OTA2 ) in clockworkmod recovery then wipe cache and dalvik cache and you are good to go. :fingers-crossed: :laugh: :highfive:
this is the link for the updates: http://forum.xda-developers.com/showthread.php?t=1679563
remember to press thanks if i helped u.
samsung galaxy y
jellyblast rom v3.0.4
merruk kernel 2.5 deluxe edition
PHONE IS OVERCLOCKED TO 1.248 GHZ
alexbrian21 said:
Just flash the zip file ( updater JBV3OTA2 ) in clockworkmod recovery then wipe cache and dalvik cache and you are good to go. :fingers-crossed: :laugh: :highfive:
this is the link for the updates: http://forum.xda-developers.com/showthread.php?t=1679563
remember to press thanks if i helped u.
samsung galaxy y
jellyblast rom v3.0.4
merruk kernel 2.5 deluxe edition
PHONE IS OVERCLOCKED TO 1.248 GHZ
Click to expand...
Click to collapse
are available also for samsung galaxy y duos?
glad if it can help ...
I don't know. Becos the ROM us not in development already. If u want to know go to the dev thread.
Sent from my GT-S5360 using xda app-developers app
can u help me..why i cant flash first ota on jelly blastv3 3.0.0,,,,,,,,,,??cant even use ota update center keeps saying ROM UNSUPPORTED,,,after i flash the rom my kernel stay on stock kernel,,,is it normal??or do i have to download and flash the kernel manually???
Is should be normal for u and u can downloa the ota's at the link above i hav given. Pls press thanks if i helped. If u want the kernel , try reflashing the rom again. ( if it works with stock kernel perfectly you don't hav the need to change it.
Sent from my GT-S5360 using xda app-developers app
update
how do I update from jellyblast(ota5 updated) to nemesis without doings a date reset?

How to flash the roms of gts7500L or any model on 7500 and vice versa..

How to get gt-7500L rom on GTs-7500
Just a rough guide ..m so busy ..someone please make a detailed one
---------------------------------------------------------------------------------------------------
Procedure to get rom working:
In windows or mac using winrar
1)First delete the boot.img from the rom of gts7500L (if it is present)
2) Just drag the boot.img( from any gt-s7500 working rom) to the zip file of gts7500"L" roms
3)Flash and njoy
Important Note: Do not extract the zip file in anystep just remember ...drag and drop ..then flash
N joy ...all the
roms of "L" or any models...hihihi...simple na ?
Danger: Dont try wid Cyanogens and other 4.1.1 or 4.2.2 roms ..it would hard brick your phone
Harshraj said:
How to get gt-7500L rom on GTs-7500
Just a rough guide ..m so busy ..someone please make a detailed one
---------------------------------------------------------------------------------------------------
Procedure to get rom working:
In windows or mac using winrar
1)First delete the boot.img from the rom of gts7500L (if it is present)
2) Just drag the boot.img( from any gt-s7500 working rom) to the zip file of gts7500"L" roms
3)Flash and njoy
Important Note: Do not extract the zip file in anystep just remember ...drag and drop ..then flash
N joy ...all the
roms of "L" or any models...hihihi...simple na ?[/QUO
my gide http://www.youtube.com/watch?v=EHqnhsWlSi0
Click to expand...
Click to collapse
i‘ll try it next time
OX Mobile Spy
Ah, I was so solve my problem, very successful. Thank you very much
Hummm cool but ...
Did this work in the 7500 L if i take boot of 7500 L working and i put in rom of 7500 , My 7500 L will work ??
Yaa....
i dont think this method would work with those s7500 cyanogenmod roms, because they depend on their jelly bean kernel, that is only for the version without the L, but i havent tested it. anyone was brave enought?
gabriel2anjos said:
i dont think this method would work with those s7500 cyanogenmod roms, because they depend on their jelly bean kernel, that is only for the version without the L, but i havent tested it. anyone was brave enought?
Click to expand...
Click to collapse
Don't try it you will hard brick your phone..
Op plz mention that this works only on same android version roms and also only those which are made from stock rom not from source...
Sent from my Galaxy Nexus using xda premium
gabriel2anjos said:
i dont think this method would work with those s7500 cyanogenmod roms, because they depend on their jelly bean kernel, that is only for the version without the L, but i havent tested it. anyone was brave enought?
Click to expand...
Click to collapse
Yaaa ...obiviously
lokeshsaini94 said:
Don't try it you will hard brick your phone..
Op plz mention that this works only on same android version roms and also only those which are made from stock rom not from source...
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
Yaa ..thnxx ..lokesh

[Q] How to flash 4.2.X kernel

Could anyone help me how to flash my micromax a110 from 4.1.1 to 4.2 versions
sakthivel19880103 said:
Could anyone help me how to flash my micromax a110 from 4.1.1 to 4.2 versions
Click to expand...
Click to collapse
yes but describe your problrm in detail...where u have prob? or what do u want?
u need to flash a rom or just want to flash kernel...there many methods to flashing roms & kernel & recovery, etc.....just tell me what do u want?
i will help u surely
Go to recovery(cwm, twrp, ctr etc),
Wipe dalvic cache,
Choose Install zip from sdcard and select your kernel zip file to flash it,
Now reboot your phone if necessary.
sdkzone said:
yes but describe your problrm in detail...where u have prob? or what do u want?
u need to flash a rom or just want to flash kernel...there many methods to flashing roms & kernel & recovery, etc.....just tell me what do u want?
i will help u surely
Click to expand...
Click to collapse
Hey thanks ,
Actually when i flash a rom for 4.1.1 its working , but when i do for 4.2.X its not booting . can u tell me the steps like how i can install the 4.2.X by flashing the kernel and ROM.
sakthivel19880103 said:
Hey thanks ,
Actually when i flash a rom for 4.1.1 its working , but when i do for 4.2.X its not booting . can u tell me the steps like how i can install the 4.2.X by flashing the kernel and ROM.
Click to expand...
Click to collapse
hey bro, some rom comes with boot.img or uboot.img & some rom doesnt comes with that file. in micromax a110 4.1.x roms comes with boot.img & when u install custom roms like 4.2.x u need to add boot.img in zip file before flashing (Installing) rom..thats why ur fone is not booting.. before flashing any 4.2.x rom u need to flash letest kernel.
sdkzone said:
hey bro, some rom comes with boot.img or uboot.img & some rom doesnt comes with that file. in micromax a110 4.1.x roms comes with boot.img & when u install custom roms like 4.2.x u need to add boot.img in zip file before flashing (Installing) rom..thats why ur fone is not booting.. before flashing any 4.2.x rom u need to flash letest kernel.
Click to expand...
Click to collapse
Thanks this is what i want exactly could you provide me the steps.
sakthivel19880103 said:
Thanks this is what i want exactly could you provide me the steps.
Click to expand...
Click to collapse
yes sure. why not...
1. Download your desire rom for your phone (then add boot.img file in rom's zip file if require)
2. copy rom's zip file to sd card
3. restart phone into cwm/twrp recovery mode
3.2 flash latest kernel if rom require.(if rom's ver is 4.2.X it compulsory to flash latest kernel like 3.4.67/70/73/74/78 latest is 3.4.78)
4. wipe cache, data & dalvik cache.
5. goto install/update from sd card
6. install rom from sd card file
7. after finishing installation. again wipe cache, data & dalvik cache.
8. flash patch/update file if require.
9. restart system.
Enjoy
Sdk_Zone said:
yes sure. why not...
1. Download your desire rom for your phone (then add boot.img file in rom's zip file if require)
2. copy rom's zip file to sd card
3. restart phone into cwm/twrp recovery mode
3.2 flash latest kernel if rom require.(if rom's ver is 4.2.X it compulsory to flash latest kernel like 3.4.67/70/73/74/78 latest is 3.4.78)
4. wipe cache, data & dalvik cache.
5. goto install/update from sd card
6. install rom from sd card file
7. after finishing installation. again wipe cache, data & dalvik cache.
8. flash patch/update file if require.
9. restart system.
Enjoy
Click to expand...
Click to collapse
please
1.where i can get the boot.img?can i get it from any rom?exmple rom with 4.1.1
2.where i can get the latest kernel to flash 4.2.x rom?
tq..
tamhar said:
please
1.where i can get the boot.img?can i get it from any rom?exmple rom with 4.1.1
2.where i can get the latest kernel to flash 4.2.x rom?
tq..
Click to expand...
Click to collapse
1. u can add boot.img from any mmx a110 rom.. if ur rom is 4.1.X u can choose from any 4.1.X rom or ur rom is 4.2.X u need to add boot.img/uboot.img only from any 4.2.X rom.
2. if u need latest kernel u need to google it. or pm me.
Need Kernel download link
Sdk_Zone said:
1. u can add boot.img from any mmx a110 rom.. if ur rom is 4.1.X u can choose from any 4.1.X rom or ur rom is 4.2.X u need to add boot.img/uboot.img only from any 4.2.X rom.
2. if u need latest kernel u need to google it. or pm me.
Click to expand...
Click to collapse
Hi Bro!
could you sent me thelink for downloading latest kernel
---------- Post added at 05:10 PM ---------- Previous post was at 04:23 PM ----------
Srini_M said:
Hi Bro!
could you sent me thelink for downloading latest kernel
Click to expand...
Click to collapse
Bro! thanks alot,
I got the latest kernel from google search and got updated my fav ROM.
thanks :good:
Srini_M said:
Hi Bro!
could you sent me thelink for downloading latest kernel
---------- Post added at 05:10 PM ---------- Previous post was at 04:23 PM ----------
Bro! thanks alot,
I got the latest kernel from google search and got updated my fav ROM.
thanks :good:
Click to expand...
Click to collapse
bro i am in 4.1 and i want to update 4.2 to anyone tell were i can get 4.2 kernel and boot.img for Ultimate+Galaxy+V3+A110+By+Thunder_Droid.zip ???
---------- Post added at 11:45 AM ---------- Previous post was at 11:21 AM ----------
MihirGosai said:
Go to recovery(cwm, twrp, ctr etc),
Wipe dalvic cache,
Choose Install zip from sdcard and select your kernel zip file to flash it,
Now reboot your phone if necessary.
Click to expand...
Click to collapse
bro i am on 4.1 using suvi rom present i want to upgrade to 4.2 to use Ultimate+Galaxy+V3+A110+By+Thunder_Droid rom
first we have to flash 4.2 kernel via cwm and flash rom via cwm is this process correct
will it be problem if i don't install 4.2 rom after flashing 4.2 kernel can i use my old suvi 4.1 rom ?>??
help me i am trying to update from past 2 weeks confused with two many answers help me bro
rahulk23 said:
bro i am in 4.1 and i want to update 4.2 to anyone tell were i can get 4.2 kernel and boot.img for Ultimate+Galaxy+V3+A110+By+Thunder_Droid.zip ???
---------- Post added at 11:45 AM ---------- Previous post was at 11:21 AM ----------
bro i am on 4.1 using suvi rom present i want to upgrade to 4.2 to use Ultimate+Galaxy+V3+A110+By+Thunder_Droid rom
first we have to flash 4.2 kernel via cwm and flash rom via cwm is this process correct
will it be problem if i don't install 4.2 rom after flashing 4.2 kernel can i use my old suvi 4.1 rom ?>??
help me i am trying to update from past 2 weeks confused with two many answers help me bro
Click to expand...
Click to collapse
Okey Bro....Ur Process is correct...first flash kernel then rom...& yes, after flashing 4.2.X Kernel U can able to use ur old 4.1 rom also....
now for kernel, the latest kernel is bindas boost on xda - http://forum.xda-developers.com/showthread.php?t=2683095
& if u need any extreme kernel then u need to google it cos we cant give u link or doent suggest u due to GPL Violation on XDA FORUMS
now for boot.img if u flash the latest kernel then u dont need to add any boot.img in zip file cos boot.img just contains kernel.
Hit Thanks if i helped u..
how to flash kernel 4.1 to 4.2 in mmx a110
hi devs please anybody explane how to flash kernel in mmx a110
Hi
1. Download kernel on SD card
2. Go to rectory and flash
Sent from my A110 using Tapatalk
Sdk_Zone said:
yes sure. why not...
1. Download your desire rom for your phone (then add boot.img file in rom's zip file if require)
2. copy rom's zip file to sd card
3. restart phone into cwm/twrp recovery mode
3.2 flash latest kernel if rom require.(if rom's ver is 4.2.X it compulsory to flash latest kernel like 3.4.67/70/73/74/78 latest is 3.4.78)
4. wipe cache, data & dalvik cache.
5. goto install/update from sd card
6. install rom from sd card file
7. after finishing installation. again wipe cache, data & dalvik cache.
8. flash patch/update file if require.
9. restart system.
Enjoy
Click to expand...
Click to collapse
bro i am in 4.2 rom with 4.2 kernel and i want to downgrade to 4.1 help me plz
tell me how to downgrade from 4.2 to 4.1 procedure plz
rahulk23 said:
bro i am in 4.2 rom with 4.2 kernel and i want to downgrade to 4.1 help me plz
tell me how to downgrade from 4.2 to 4.1 procedure plz
Click to expand...
Click to collapse
That's very simple....download desire 4.1 rom & flash it through recovery...all 4.2 kernel work with 4.1roms...if u not want to use 4.2 kernel than u flash 4.1 kernel on ur device...
if u want to flash stock rom than flash it through sp flash tool...any time u can upgrade downgrade ur rom or kernel. just follow procedure(Instruction as per dev say).
Upgrade success
Thanks to this forum. I was scared to upgrade kernel thinking the phone could brick for any mistake i do in the process. However, it appeared that the process is simple. Just installed the kernel (.zip) from recovery cwm. Hope my GPS works fine this time. I just installed kernel 3.4.82 xtreme and running gb 4.2.2 team minha smashers ROM. Hope GPS works better this time.
---------- Post added at 07:37 AM ---------- Previous post was at 07:20 AM ----------
One quick question:
How to downgrade my micromax canvas 2 A110 from 4.2.2 custom rom (kernel 3.4.89) back to ICS? What precautions to be taken?
Any advice is much appreciated. Thanks.
Manjunath.S said:
Thanks to this forum. I was scared to upgrade kernel thinking the phone could brick for any mistake i do in the process. However, it appeared that the process is simple. Just installed the kernel (.zip) from recovery cwm. Hope my GPS works fine this time. I just installed kernel 3.4.82 xtreme and running gb 4.2.2 team minha smashers ROM. Hope GPS works better this time.
---------- Post added at 07:37 AM ---------- Previous post was at 07:20 AM ----------
One quick question:
How to downgrade my micromax canvas 2 A110 from 4.2.2 custom rom (kernel 3.4.89) back to ICS? What precautions to be taken?
Any advice is much appreciated. Thanks.
Click to expand...
Click to collapse
dear manjunath
as @Sdk_Zone mentioned in earlier post downgrading to 4.1.x from 4.2.x is just simple
1.downlaod 4.0.x ROM
2.download 4.0.x kernel.(search on google)
flash ROM then kernel it will reboot auto.if not than reboot manually.
DOne now your phone is on ICS.
camera issue
guys i m facing camera issue in every 4.2 rom...i already tried 4.2ics_bindass_boost_2.7 kernel but still facing the problem...
my canvas 2 is ics out box..what should i do?
logo.img
tamhar said:
please
1.where i can get the boot.img?can i get it from any rom?exmple rom with 4.1.1
2.where i can get the latest kernel to flash 4.2.x rom?
tq..
Click to expand...
Click to collapse
here i have attached file for you
download it and put it into your rom zip file and flash it
logo.bin

[Q] Which Custom 4.2.2 ROM is the Best for Micromax A110 Canvas 2

All Dear Senior Members please guide me for the best and totally bug free customised 4.2.2 ROM for Micromax A110 in which all features of the device work smooth? And, also instruct me in installing a Custom 4.2.2 Jelly Bean Rom on my device which is presently running the Official 4.1.1 Jelly Bean ROM. Thank You!
saalikrao said:
All Dear Senior Members please guide me for the best and totally bug free customised 4.2.2 ROM for Micromax A110 in which all features of the device work smooth? And, also instruct me in installing a Custom 4.2.2 Jelly Bean Rom on my device which is presently running the Official 4.1.1 Jelly Bean ROM. Thank You!
Click to expand...
Click to collapse
u can choose from here - http://forum.xda-developers.com/showthread.php?t=2172561 thread by iamnimit. there r many stable roms available like miui, darknexus, ultimate galaxy, lego ice fusion, lego ice, etc., i'm currently on ultimate galaxy v3 rom with revised-1gbram swap & letest kernel v 3.4.78.
if u need more help, just post below
How to Flash Ultimate Galaxy V3 Rom
Sir firstly tell me If the Camera(front and rear),Bluetooth, Wifi, Radio, Sms, OTG, 3G ,GPS, etc works smoothly on this Ultimate Galaxy v3 rom by default? Or there is need to flash some other files after flashing this ROM to make all these above said functions work?? And secondly , tell me how to flash this Kernel?? Thank You!
saalikrao said:
Sir firstly tell me If the Camera(front and rear),Bluetooth, Wifi, Radio, Sms, OTG, 3G ,GPS, etc works smoothly on this Ultimate Galaxy v3 rom by default? Or there is need to flash some other files after flashing this ROM to make all these above said functions work?? And secondly , tell me how to flash this Kernel?? Thank You!
Click to expand...
Click to collapse
Every things work well..bt 1st i cant say about otg cos i dont use it. 2nd there was minor prob in fm app u need to flash a patch if u want fm app. i dont flash it cos i dont want to use fm, thats not a big prob. 3rd thing for kernel we cant gave u link at here due to forum rules.
i can help u for flashing kernel, its very simple process like flashing any thing from cwm/twrp recovery.
1. u need to root ur phone & install cwm or twrp recovery
if u have it already skip step 1.
2. download latest kernel which support ur phone. 3.4.67 or above with ur desire rom ver like 4.1.x or 4.2.x
3. copy zip file to sd card.
4. now reboot ur phone into recovery by holding vol up + vol down + power keys
5. into recovery mod choose install/update via sdcard
6. find the kernel zip file & Install it.
7. reboot ur phone & enjoy.
u can check ur kernel ver in about device in settings.
Sdk_Zone said:
Every things work well..bt 1st i cant say about otg cos i dont use it. 2nd there was minor prob in fm app u need to flash a patch if u want fm app. i dont flash it cos i dont want to use fm, thats not a big prob. 3rd thing for kernel we cant gave u link at here due to forum rules.
i can help u for flashing kernel, its very simple process like flashing any thing from cwm/twrp recovery.
1. u need to root ur phone & install cwm or twrp recovery
if u have it already skip step 1.
2. download latest kernel which support ur phone. 3.4.67 or above with ur desire rom ver like 4.1.x or 4.2.x
3. copy zip file to sd card.
4. now reboot ur phone into recovery by holding vol up + vol down + power keys
5. into recovery mod choose install/update via sdcard
6. find the kernel zip file & Install it.
7. reboot ur phone & enjoy.
u can check ur kernel ver in about device in settings.
Click to expand...
Click to collapse
Sir It means I have to first flash the kernel and then after doing that I will be able to flash the Ultimate Galaxy V3 Rom? and tell me which is the best kernel for running Ultimate Galaxy v3 rom?
saalikrao said:
Sir It means I have to first flash the kernel and then after doing that I will be able to flash the Ultimate Galaxy V3 Rom? and tell me which is the best kernel for running Ultimate Galaxy v3 rom?
Click to expand...
Click to collapse
Yes Brother, u need flash kernel before flashing any 4.2.X rom. & the best kernel ver for ultimate galaxy v3 rom is 3.4.73, 3.4.78.
Sdk_Zone said:
Every things work well..bt 1st i cant say about otg cos i dont use it. 2nd there was minor prob in fm app u need to flash a patch if u want fm app. i dont flash it cos i dont want to use fm, thats not a big prob. 3rd thing for kernel we cant gave u link at here due to forum rules.
i can help u for flashing kernel, its very simple process like flashing any thing from cwm/twrp recovery.
1. u need to root ur phone & install cwm or twrp recovery
if u have it already skip step 1.
2. download latest kernel which support ur phone. 3.4.67 or above with ur desire rom ver like 4.1.x or 4.2.x
3. copy zip file to sd card.
4. now reboot ur phone into recovery by holding vol up + vol down + power keys
5. into recovery mod choose install/update via sdcard
6. find the kernel zip file & Install it.
7. reboot ur phone & enjoy.
u can check ur kernel ver in about device in settings.
Click to expand...
Click to collapse
Sdk_Zone said:
Yes Brother, u need flash kernel before flashing any 4.2.X rom. & the best kernel ver for ultimate galaxy v3 rom is 3.4.73, 3.4.78.
Click to expand...
Click to collapse
Ok Sir I will strictly follow your instructions. And, if at any point your help is needed I will surely disturb you again ..lolz ..thanks a lot
saalikrao said:
Ok Sir I will strictly follow your instructions. And, if at any point your help is needed I will surely disturb you again ..lolz ..thanks a lot
Click to expand...
Click to collapse
Bro its my pleasure to help MMX Device users. it's not a disturbance to me, be desi use desi.
Hit Thanks if I helped U.
what is Ram Swap
Sdk_Zone said:
Bro its my pleasure to help MMX Device users. it's not a disturbance to me, be desi use desi.
Hit Thanks if I helped U.
Click to expand...
Click to collapse
Sir I forgot to ask you about The "RAM SWAP" mentioned by you? what is this and how to make this work?
saalikrao said:
Sir I forgot to ask you about The "RAM SWAP" mentioned by you? what is this and how to make this work?
Click to expand...
Click to collapse
Ooups....Sorry forget to tell about it....u can download it from here...http://forum.xda-developers.com/showthread.php?t=2531124 by saurabh0291 & the installation process is also there it works on swap support kernel only. which is i provide u.. both are support swap feature.
Sdk_Zone said:
Ooups....Sorry forget to tell about it....u can download it from here...http://forum.xda-developers.com/showthread.php?t=2531124 by saurabh0291 & the installation process is also there it works on swap support kernel only. which is i provide u.. both are support swap feature.
Click to expand...
Click to collapse
It means i have to first install the kernel, than the Ultimate Galaxy v3 rom and then this Ram Swap Feature in order to get 1 GB Ram??
saalikrao said:
It means i have to first install the kernel, than the Ultimate Galaxy v3 rom and then this Ram Swap Feature in order to get 1 GB Ram??
Click to expand...
Click to collapse
Yes Bro, Try it... u can use this swap feature on any mmx roms with supported kernels.
Sdk_Zone said:
Yes Bro, Try it... u can use this swap feature on any mmx roms with supported kernels.
Click to expand...
Click to collapse
Ok
firstly i am going to flash all these stuff in my device .And then will tell u about my experience soon ..Take Care Bro and thank you !!
saalikrao said:
Ok
firstly i am going to flash all these stuff in my device .And then will tell u about my experience soon ..Take Care Bro and thank you !!
Click to expand...
Click to collapse
Ok....sure Bro.. try it...n let me know ur experience soon...take care & hit thanks button
best roms
hey bro! try sagarwap's legoice fusion v3 (released on 5/2/14) its the best rom according to me ,i'm using it ,it works great ,no lag ,lots of free ram,
and the attractive point best samsung interface provided by any rom (according to me).all others details u can find at the thread. hit thanks if my post helped
---------- Post added at 04:10 AM ---------- Previous post was at 04:04 AM ----------
if you like u can also try legoice turbo v3.1 (runs on 4.2.1 ),it gives the latest micromax turbo interface experience with amazing features like icall and isms (floating sms and call), a lots of smart gestures,and always 200+ free ram on first reboot. you can surely try this, u won;t regret flashing this rom, second best rom by sagarwap according to me . Note: i hav used both the roms and reviewing according to my experience. Please hit thanks if my post helped u.
Sdk_Zone said:
Ooups....Sorry forget to tell about it....u can download it from here...http://forum.xda-developers.com/showthread.php?t=2531124 by saurabh0291 & the installation process is also there it works on swap support kernel only. which is i provide u.. both are support swap feature.
Click to expand...
Click to collapse
@Sdk_Zone
can i follow the instruction there? since i have flash sagarwap's legoice fusion v3 and suvi booster script but i still feel laggy on my phone. im currently on xtreme - zeal 3.4.x kernel
tamhar said:
@Sdk_Zone
can i follow the instruction there? since i have flash sagarwap's legoice fusion v3 and suvi booster script but i still feel laggy on my phone. im currently on xtreme - zeal 3.4.x kernel
Click to expand...
Click to collapse
Yes, Why not?? Sure u can try it. all the thing u have on ur device just go ahead n try.
Sdk_Zone said:
Yes, Why not?? Sure u can try it. all the thing u have on ur device just go ahead n try.
Click to expand...
Click to collapse
good
In every 4.2.2 rom they say,if u r on 4.1x you need to flash kernel.Can anyone tell me how to flash kernel(4.2)?
Currently my canvas 2 is running on 4.1.1(CanXperia rom).
Rik.shohag said:
In every 4.2.2 rom they say,if u r on 4.1x you need to flash kernel.Can anyone tell me how to flash kernel(4.2)?
Currently my canvas 2 is running on 4.1.1(CanXperia rom).
Click to expand...
Click to collapse
Ya sure download the latest kernel
copy it to sd card
reboot ur device into recovery mode
install/flash zip from sd card
select & install kernel's zip file
reboot in normal mode & enjoy

[Q] Camera not working please help

I've flashed many many Roms,(color rom, MIUI. etc) the latest being the JMP Chili Rom and my camera does not work in all of them. It says, cannot connect to camera. I've already flashed the Binass kernel, but maybe I flashed it wrong? Is there something I need to do? Please help me out, thank you so much in advance.
Dave
Loathe said:
I've flashed many many Roms,(color rom, MIUI. etc) the latest being the JMP Chili Rom and my camera does not work in all of them. It says, cannot connect to camera. I've already flashed the Binass kernel, but maybe I flashed it wrong? Is there something I need to do? Please help me out, thank you so much in advance.
Dave
Click to expand...
Click to collapse
Reflash proper Rom package with Proper Kernal File And Patches (if Any)
Regards
Hit thx if i help u
SMARTY BOY said:
Reflash proper Rom package with Proper Kernal File And Patches (if Any)
Regards
Hit thx if i help u
Click to expand...
Click to collapse
You mean flash again with the same ROM and kernel that I have just flashed? Ok I'll try that out but not sure how that will help.
Bro U flash Patches too if their is Any
Hit thx if i helped u
Sent from my Micromax A110 using Tapatalk
Bro I did everything mentioned here still no camera. What do?
Loathe said:
I've flashed many many Roms,(color rom, MIUI. etc) the latest being the JMP Chili Rom and my camera does not work in all of them. It says, cannot connect to camera. I've already flashed the Binass kernel, but maybe I flashed it wrong? Is there something I need to do? Please help me out, thank you so much in advance.
Dave
Click to expand...
Click to collapse
right now which rom are you using ?
4.1.x or 4.2.x ??
ashish_zarekar said:
right now which rom are you using ?
4.1.x or 4.2.x ??
Click to expand...
Click to collapse
I'm using the JMP Chili Rom 4.2.1
thanks for replying, I would really appreciate any help
kernel link
Loathe said:
I'm using the JMP Chili Rom 4.2.1
thanks for replying, I would really appreciate any help
Click to expand...
Click to collapse
i was also facing same problem but after flashing this kernel all problems get solved.
here is link
ashish_zarekar said:
i was also facing same problem but after flashing this kernel all problems get solved.
here is link
Click to expand...
Click to collapse
Do you have to wipe cache/dalvik or anything else after flashing this kernel? I have flashed it too, but only the front camera is working.
when do you flash it? right after flashing ROM? Can I do it now that my phone is up and running? or do I have to reflash the rom too?
Thanks so much for replying.
Loathe said:
Do you have to wipe cache/dalvik or anything else after flashing this kernel? I have flashed it too, but only the front camera is working.
when do you flash it? right after flashing ROM? Can I do it now that my phone is up and running? or do I have to reflash the rom too?
Thanks so much for replying.
Click to expand...
Click to collapse
SkipDeath said:
Same problem with me except I don't have an out of box jb mobile , I have tried each and everything but nothing seems to help
Click to expand...
Click to collapse
1.Go to recovery
2.clear dalvik cache
3.Flash this kernel.
4.reboot in recovery.
5. flash your rom
6. clear dalvik cache
7. flash kernel
8.reboot.
it work for me.
i am on suvi 16. and all stuff work properly besides screen problem
why don't you try this rom to check camera is working or not. i love to use this rom.
you should try this rom
ashish_zarekar said:
1.Go to recovery
2.clear dalvik cache
3.Flash this kernel.
4.reboot in recovery.
5. flash your rom
6.reboot.
it work for me.
i am on suvi 16. and all stuff work properly besides screen problem
why don't you try this rom to check camera is working or not. i love to use this rom.
you should try this rom
Click to expand...
Click to collapse
could you please provide link to this rom?
Thanks so much in advance
Same problem with me except I don't have an out of box jb mobile , I have tried each and everything but nothing seems to help
Camera not working in 4.2 roms - solution
Hi,
Now, are you on a micromax A110 that came with jellybean by default when you bought it (referred to as jb out of the box). If so
1. the new unified bindassboost 4.2 kernel by bindass dost supports camera in jb out of the box devices. flash that while flashing the rom and it should be okay. here is the link to the thread. http://forum.xda-developers.com/showthread.php?t=2683095
These are the steps I usually use when flashing,
1. wipe data, wipe dalvik cache (in advanced options)
2. go to mounts and storage and format system
3. install the rom zip
4. install any patches, if provided (although I usually boot the first time, see if the patch is necessary and then if so, install)
5. install bindassboost 4.2 kernel
6. reboot:highfive:
Note: the above instructions are for 4.2 roms only. For 4.1 you can skip step 5.
As for 4.2 Roms, there are
1 http://forum.xda-developers.com/showthread.php?t=2025391 (JMP chilli)
2 http://forum.xda-developers.com/showthread.php?t=2748464 (ARB)
3 http://forum.xda-developers.com/showthread.php?t=2772691 (Fusion radiator)
4 http://forum.xda-developers.com/showthread.php?t=2772399 (catsdroid ... I loved this one
5 http://forum.xda-developers.com/showthread.php?t=2729267 (LBA)
6 http://forum.xda-developers.com/showthread.php?t=2740980 (Ultimate aspire ... good one)
just to name a few. I'm not going to give the links for all the others because it's late and I've got college tomorrow:crying:
I'll just give you the names,
0. MERE rom v2 (very good one)
1. note 3 by parthroxx
2. samsung ...um s4 or something by parthroxx
3. walton rgt
4. colour os by [email protected] (not the other one by avenger4droud, its got too many bugs and takes a long time to take care of em all)
5. monster os by pradeep maddy (got a little bug though. cant place widgets)
6. All miui roms (I'd advise you to avoid them, because on jb out of the box (I'm not sure about others) they lag like hell and you cant transfer apps to the sd card (4.2 roms. In 4.1 mi there was no camera focus)
7. there are 2 xperia based ones. Both have bugs. in one camera doesn't focus. the other gives a lot of fc's
Personally, i prefer 4.1 roms though. It seems 4.2 lags a bit on jb out of the box:crying: as far as I've tried.
23
sarvajith said:
Hi,
Now, are you on a micromax A110 that came with jellybean by default when you bought it (referred to as jb out of the box). If so
1. the new unified bindassboost 4.2 kernel by bindass dost supports camera in jb out of the box devices. flash that while flashing the rom and it should be okay. here is the link to the thread. http://forum.xda-developers.com/showthread.php?t=2683095
These are the steps I usually use when flashing,
1. wipe data, wipe dalvik cache (in advanced options)
2. go to mounts and storage and format system
3. install the rom zip
4. install any patches, if provided (although I usually boot the first time, see if the patch is necessary and then if so, install)
5. install bindassboost 4.2 kernel
6. reboot:highfive:
Note: the above instructions are for 4.2 roms only. For 4.1 you can skip step 5.
As for 4.2 Roms, there are
1 http://forum.xda-developers.com/showthread.php?t=2025391 (JMP chilli)
2 http://forum.xda-developers.com/showthread.php?t=2748464 (ARB)
3 http://forum.xda-developers.com/showthread.php?t=2772691 (Fusion radiator)
4 http://forum.xda-developers.com/showthread.php?t=2772399 (catsdroid ... I loved this one
5 http://forum.xda-developers.com/showthread.php?t=2729267 (LBA)
6 http://forum.xda-developers.com/showthread.php?t=2740980 (Ultimate aspire ... good one)
just to name a few. I'm not going to give the links for all the others because it's late and I've got college tomorrow:crying:
I'll just give you the names,
0. MERE rom v2 (very good one)
1. note 3 by parthroxx
2. samsung ...um s4 or something by parthroxx
3. walton rgt
4. colour os by [email protected] (not the other one by avenger4droud, its got too many bugs and takes a long time to take care of em all)
5. monster os by pradeep maddy (got a little bug though. cant place widgets)
6. All miui roms (I'd advise you to avoid them, because on jb out of the box (I'm not sure about others) they lag like hell and you cant transfer apps to the sd card (4.2 roms. In 4.1 mi there was no camera focus)
7. there are 2 xperia based ones. Both have bugs. in one camera doesn't focus. the other gives a lot of fc's
Personally, i prefer 4.1 roms though. It seems 4.2 lags a bit on jb out of the box:crying: as far as I've tried.
Click to expand...
Click to collapse
Thanks so much for your reply bro. So to clarify, if I flash any of the above ROMs with JB out of the box, my camera should work right? Or do I have to flash a 4.1 ROM? If so, which 4.1 ROM would you recommend?
Thanks again Bro.
Loathe said:
could you please provide link to this rom?
Thanks so much in advance
Click to expand...
Click to collapse
here is link for thread SUVI rom just flash this one this is 4.2.x
if you want 4.1.x then flash this one Suvi ROM V15 - TiTan
i am on SUVI 16 bulid 3 which is 4.2.x and its awesome i love this rom. and you will also
don't say just thanks. hit thanks button also brother. if you want any help don't shy to ask
ashish_zarekar said:
here is link for thread SUVI rom just flash this one this is 4.2.x
if you want 4.1.x then flash this one Suvi ROM V15 - TiTan
i am on SUVI 16 bulid 3 which is 4.2.x and its awesome i love this rom. and you will also
don't say just thanks. hit thanks button also brother. if you want any help don't shy to ask
Click to expand...
Click to collapse
'
Bro I cant flash these Roms, always stuck after the message "deleting cache"
T_T
Loathe said:
Thanks so much for your reply bro. So to clarify, if I flash any of the above ROMs with JB out of the box, my camera should work right? Or do I have to flash a 4.1 ROM? If so, which 4.1 ROM would you recommend?
Thanks again Bro.
Click to expand...
Click to collapse
Well, you can pretty much flash any 4.2 Rom as long as you follow my steps and flash the BINDASSBOOST latest version kernel found in the original android development section:victory:
These are just the Roms I've tried out and liked a bit
No you don't have to flash a 4.1 Rom. I was just saying that as far as I had observed ( I own a JB out of the box device), 4.2 Roms seemed to lag a lot. That's why I said I preferred 4.1 Roms. It was just my opinion. You DON'T NEED to flash a 4.1 Rom
If you are stuck at deleting cache during the ROM'S INSTALLATION (after you've pressed install zip), then
1. you may not actually be stuck. In some Roms, the blue bar indicating progress does'nt move uch during installation. So you may think it got stuck.
2. Try changing your recovery. I suggest clockworkmod v 6.0.28. I once used TWRP recovery and it didnot flash any Rom on the first try and kept getting a message saying I had Root problems. Might be something with the recovery
3. The ROM file may be corrupt. Try downloading again. But mostly I think it's first one.
If you're stuck at deleting cache while using the wipe cache option from the recovery, then there is something wrong with your recovery. flash a new one.
Hope I helped!

Categories

Resources