Below is the direct link to download the Gionee F103 Stock Firmware (flash file) from GoogleDrive. Firmware contains Flash Tool, Driver and instructions.
Gionee_F103_0203_T5293.zip
" https://docs.google.com/uc?id=0Bxbxl3u2_t15U2dTbnhYODRaNlk "
Gionee_F103_0203_T5346.zip
" https://docs.google.com/uc?id=0Bxbxl3u2_t15dE9sbXU3NV8zRU0 "
Gionee_F103_0203_T5616.zip
" https://docs.google.com/uc?id=0B3MWIAQ-re4KQ1hLZHFOUWRqd0k "
How to Flash
Step 1: Download and extract the stock firmware on your computer.
Step 2: After extracting you will find the SP Flash Tool, Driver and instruction manual.
Step 3: Install the USB Drivers (skip if drivers are already installed).
Step 4: Open the SP Flash Tool and load the Scatter File from the firmware folder.
Step 5: Connect your Smartphone to the computer using the USB Driver.
Step 6: Click on Upgrade / Download Button in the SP Flash Tool to Begin the Flashing.
Step 7: Green Ring will appear at the end of successful Flash.
Important Notes:
[*] Take a Backup of your personal data before flashing or installing the firmware on your smartphone. As this helps you to recover the personal data whenever any thing wrong happens.
Hi,
Information like this for Android devices with no dedicated section would go here,
http://forum.xda-developers.com/android/general
XDA Assist is here to help members navigate the site , not for guides.
Thanks! I'll close this thread.
Greetings,
This ROM is only for Xiaomi Note 1W / HM Note 1W with MT6592 chipset.
Please flash it using SP Flash Tools.
GAPPS Not Included!
Unroot
DOWNLOAD ROM
DOWNLOAD MTK65xx Drivers
DOWNLOAD SP Flash Tools
Simple Guide For Flashing Bricked Device :
Requirements :
Phone
USB Cable
Computer / Laptop
- Remove battery from phone.
- Open SP Flash Tools
- Load Scatter file from downloaded ROM folder
- Choose Download only and press DOWNLOAD button.
- Connect your device using USB cable
- PC will install driver - MTK preloader driver
- SP flash tools will start to flash device, just wait until "green circle" popup on screen.
- Unplug USB > Insert battery > Turn ON
First time boot will take some time around 5-10minutes.
** In case if Error while Flashing
- Please change download mode to Firmware Upgrade and DOWNLOAD again.
** For dead phone ( Not power ON, not charging )
- Please refer to this thread. Same methods applied.
Good Luck!
Requirements For Root Symphony i50:
1. Windows PC
2. Mobile
3. installment of usb/vcom drivers
4. SuperSU
Disclaimer:
I am not responsible for bricked devices.
I will not give support, if you did not follow flash instructions 'word by word'.
Click to expand...
Click to collapse
Download Require Files - Here>>
And Extract
Step 1 : First install the vcom & usb drivers
Step 2: Copy "SuperSU.zip" in your phone memory.
Step 2 : Now open sp flash tools & select scatter file "MT6580_Android_scatter.txt" with recovery.img.
Step 3 : Remove battery From Phone, Click "Download" on sp flash tool & Connect USB With Cable with PC,
Wait till Successfull.
Step 4 : Now connect battery & press on Vollum Up key and power key at same time.
Step 5 : Press on install button and Select "SuperSU.zip"
Step 6: Now Swipe on install Button.
Step 7 : After successfully instaling supersu, reboot the system.
A Video example (its for i10) - https://www.youtube.com/watch?v=A-hbCWRHaYw&feature=youtu.be
Hit Thanks if you success.
It worked now my i50 is rooted now but i need a cm14 custom rom for it can you help? Please
I need a Symphony i18 twrp or root
Place help us
Need CWM recovery zip file for Symphony Z15
My device name is Symphony Z15 I need CWM recovery zip file,plz help.
I've ported Lenovo a1000 cwm recovery to Starmobile Play boost!
link: below
JUST RENAME IT WITH "recovery.img" without quotes!
NOTE: THE CWM RECOVERY IS NOT FULLY PORTED.. (PROBLEMS IN LOGGING) you cant see the progress of
flashing fully but it works!
ROOT GUIDE:
TO ROOT STARMOBILE PLAY BOOST.. FLASH THE SUPERSU ZIP ROOT USING CWM RECOVERY I PROVIDED!
(it works! VERIFIED BY ME)
Link for supersu: below
METHOD FOR FLASHING THE RECOVERY:
MY METHOD IS INVOLVING WIPING DATA.. YOU CAN USE YOUR'E OWN METHOD BUT THIS IS THE METHOD I USE TO FLASH THE RECOVERY TO MY PHONE
INSTALL SPREADTRUM DRIVERS, LINK: below
INSTALLING SPREADTRUM DRIVERS NEEDED DISABLED DRIVER SIGNATURE ENFORCEMENT... LINK FOR DISABLING IT: below
SPREADTRUM UPDATE UTILITY:below
STARMOBILE PLAY BOOST STOCK ROM: below
STEPS FOR FLASHING: INVOLVES DATA WIPING!!!!
STEP 1: INSTALL SPREADTRUM DRIVERS: GUIDE:
STEP 2: EXTRACT THE STOCK ROM (.PAC) FILE AND THE UPGRADE UTILITY IN ONE FOLDER
STEP 3: OPEN THE "UpgradedDownload.exe" PROGRAM
STEP 4: PRESS THE SINGLE COG LOGO (OPEN PACKET FILE) AND LOCATE THE STOCK ROM .PAC TO THE SAME FOLDER
STEP 5: WAIT THE UTILITY TO EXTRACT THE FILES
STEP 6: AFTER THE FILES EXTRACTED, GO TO THE DIRECTORY OF THE UTILITY, YOU WILL SEE "ImageFiles" FOLDER, OPEN IT
STEP 7: YOU WILL SEE A FOLDER THERE NAMED "_DownloadFiles*******", OPEN IT!
STEP 8: ONCE YOU ARE THERE, DELETE THE EXISTING STOCK "recovery.img" THERE AND REPLACE IT WITH THE CWM THAT I PROVIDE "rename it with recovery.img"
STEP 9: GO BACK TO THE UTILITY AND PRESS THE PLAY BUTTON
STEP 10: TO START THE DOWNLOAD PROCESS:
TURN OFF YOUR'E DEVICE
MAKE SURE YOU INSTALLED THE SPREADTRUM DRIVERS CORRECTLY!
REMOVE THE BATTERIES
PUT THE BATTERIES BACK
PRESS VOL UP + POWER BUTTON WHILE PLUGGING THE USB CABLE
IT WILL START THE PROCESS
STEP 11: WAIT THE UTILITY TO STATE "passed" AND YOUR'E GOOD TO GO! "WIPED DATA + CWM RECOVERY INSTALLED!"
EXTRAS: ADB DRIVERS: below
GLAD TO HELP SOMEONE! to acquire links go to pastebin and /AGNYFQ62
Help!!!
Most of the links are expired or can't be found.....
TweakBox04 said:
Most of the links are expired or can't be found.....
Click to expand...
Click to collapse
email me here > [email protected]
TweakBox04 said:
Most of the links are expired or can't be found.....
Click to expand...
Click to collapse
yes it's impossible to find them
recovery img dropbox. com/s/83777cy ayia8ti3/STARM OBILE %20RECOV% 20CWM .img?dl=0
supersu root zip drop box .com/s/qfhl78 bifwawj3f/supe rsu-flashable- root.zip?dl=0
spreadtrum driver dropbox. com/ s/go1r5 xylh6ghmj k/android_spreadt rum_driver. zip?dl=0
disable driver signature enforcement guide packard-bell-scandic.cus thelp. com/app/answers/detail /a_id/38288/~/windows -10%3A-disable-signed-driver- enforcement
spreadtrum utility drop box. com / s/7nemx01hd0c u30u/SPD_ Upgrade_Tool_R17 .0.0001.zip?dl=0
stock rom needrom. com /download /starmobile-play- boost/
guide install spreadtrum drivers android mtk. com/ install-spreadtrum- usb-driver-manually
adb drivers dropbox.
com/ s/kwddnc xu000ue7 8/adb-setup-1. 4.3.exe?dl=0[
urls are not allowed to post sorry.
[All Useful Tools & Drivers For Vernee Apollo Lite - MTK 6797] - How to Use [Links]
_Constantly I see questions about the various issues of Vernee Apollo Lite (MTK 6797) and I thought to gather here the most important and useful tools ...
Will include the Stock Rom, SPFT, Drivers,IMEI tools, etc ....On the Links I will give,there will be detailed & how we use all these tools (It is enough we read carefully)...I have gathered on this thread many useful Tools as possible,especially for "Vernee Apollo Lite MT6797 " & generally for MTK devices....
_1) SPFT : all versions here : https://androidmtk.com/smart-phone-flash-tool
How to Use SPFT : https://androidmtk.com/flash-stock-rom-using-smart-phone-flash-tool
[SPFT for Linux] : https://spflashtools.com/category/linux
*( carefully when using SPFT,because in mode "Format all & download" probably will delete and your IMEI ! )
_Official site SPFT: https://spflashtools.com/
_2) MTK usb drivers (all versions) : https://androidmtk.com/download-mtk-usb-all-drivers (compatible with: Windows XP,Vista,7,8,8.1,10)
_3)MTK driver Auto Installer(all versions,Auto Installer Supports Almost all Varients of MTK chipset): https://androidmtk.com/download-mtk-driver-auto-installer
_(MTK driver Auto Installer SP .exe : http://www.mediafire.com/file/311npmjpwcuk5oy/MTK_Driver_Auto_Installer_SP_Drivers_20160804.exe/file )
_MTK drivers auto Installer v5.1453.03 / MTK devices support : MT65xx - MT67xx - MT83xx/Supported OS : WindowsXP-Windows 7-Windows8- Windows8.1-Windows10 ,32 & 64 bit _{RAR} : http://www.mediafire.com/file/judt306d37l7jb7/Driver_Auto_Installer_v5.1453.03.rar/file
__ https://mega.nz/#!0vw2wCKA!9Ef8X1FsglommtzEK3g3o9p2JTZA948PTVYgeBebrAA
_4)a'-Windows 10 MTK VCOM USB Drivers for 32 & 64 bit & How to use : https://forum.xda-developers.com/elephone-m2/help/windows-10-mtk-vcom-usb-drivers-32-64-t3267033
http://www.mediafire.com/file/mepcd8zq53s8c5v/Windows+10_MTK+VCOM+USB+Preloader+Drivers.zip
(Windows10 MTK VCOM USB Drivers for 32&64 bit.cab :
http://www.mediafire.com/file/k1cat...Android)+Driver+3.0.1504.0+for+Windows+10.cab )
_*b'- Windows10 MTK VCOM usb Drivers 32&64 bit -installation/tutorial : https://tehnotone.com/windows-10-mtk-vcom-usb-drivers-for-32-64-bit-drivers-installation-tutorial/
_5)Universal ADB Drivers all Versions: https://androidmtk.com/download-universal-adb-driver (Optionally)
(How to Use Universal ADB Drivers): https://androidmtk.com/install-universal-adb-driver
_6)MTK Droid Tool all Versions : https://androidmtk.com/download-mtk-droid-tool *[It will probably not work in MT6797]
(Restore your IMEI & much more) : https://forum.xda-developers.com/android/general/restoring-lost-imei-mtk-phone-t2820929
a_*How to backup & Restore IMEI NVRAM : https://androidmtk.com/backup-and-restore-imei-nvram
b_ * https://romprovider.com/2017/06/backup-nvram-mediatek-mt67xx/
C*_[How to Backup and Restore IMEI/NVRAM data on MTK devices-MT65XX,MT67XX & more-3 methods]using SPFT-adb&fastboot-MTK dr. Tool
https://www.getdroidtips.com/backup-restore-imei-nvram-data-mediatek/
_7)SN Write Tool all Versions: by Mediatek inc: https://androidmtk.com/download-sn-write-tool
(How to Use SN Write Tool : https://androidmtk.com/use-sn-write-tool )
_8)Maui Meta IMEI "restore/fix" : http://www.mediafire.com/file/3ob842tg553lo27/MauiMETA_exe_v9.1724.25.00.rar/file
(how to use: http://bbs.vernee.cc/forum.php?mod=viewthread&tid=987 )
_ https://youtu.be/D2JH9SebPJ8
_*[SP Meta Tool -all versions_(maui meta).It allows you to flash IMEI or repair IMEI & NVRAM on any MTK device.]
https://androidmtk.com/download-sp-meta-tool - [ https://www.youtube.com/watch?v=QXauPS7-fd0 ]
(Fix IMEI Rooted & non Rooted mtk devices): https://forum.xda-developers.com/canvas-a1/general/fix-imei-perfect-fix-android-imei-t2943567
_How To Replace the IMEI numbers in MTK devices :
http://bbs.vernee.cc/forum.php?mod=viewthread&tid=2252&extra=page=1
__Mobile Uncle Tools (all versions): https://androidmtk.com/download-mobileuncle-apk
_9) STOCK ROM Vernee Apollo Lite : http://www.mediafire.com/file/oox9f69tj2jf8k7/full_k15tb_a-ota-1508410813.zip/file
_ https://mega.nz/#!Z3RwGT5L!2DTAhxDULqZ7TR8lNq8dUQpE94-HOwPtboRyRZd205s
_ http://www.mediafire.com/file/fc1xyf35xv5pvqs/K15TB-A.A.vR1J.N1.161018.zip/file
_Vernee Official Site : http://www.vernee.cc/products/apollolite/rom/
_10) How To Install Official Stock ROM On Vernee Apollo Lite : https://www.getdroidtips.com/install-official-stock-rom-on-vernee-apollo-lite/
_Download latest SP Flash Tool – This is the tool that will be used to flash Vernee Apollo Lite etc: http://www.mediafire.com/file/z1sxl3xw1w7tmcj/SP_Flash_Tool_v5.1824_Win.zip/file
_MTK MediaTek auto preloader drivers pack – These are the drivers that will allow the MTK SP Flash Tool to communicate with your mobile : http://www.mediafire.com/file/r6h4yv2zix1ja0x/MTK_Auto_GizBeat_Chinaphonearena.rar
*[__Magisk (All Versions+Magisk Manager): https://github.com/topjohnwu/Magisk
__MagiskHide troubleshooting quide : https://www.didgeridoohan.com/magisk/HomePage
__Magisk In Recovery : https://topjohnwu.github.io/Magisk/install.html#magisk-in-recovery
__SuperSU v2.82 SR5 : https://forum.xda-developers.com/apps/supersu/2014-09-02-supersu-v2-05-t2868133
__BusyBox(Recovery Flashable Zips): https://github.com/yashdsaraf/bb-bot/releases/tag/v1.29.2-YDS-201808012015 (If you don't know your device,you can flash Universal zip)
__Xposed-L/M/N/O: https://forum.xda-developers.com/showthread.php?t=3034811 ]
_MTK Engineer Mode app: https://forum.xda-developers.com/android/apps-games/app-mtk-engineer-mode-t2975528
_Android CDC drivers (xp-vista-7-8-8.1-10) & how to use : https://androidmtk.com/install-android-cdc-driver-manually
Mega : https://mega.nz/#!Yn5QXCwZ!FzxWeESDOGlMjtYIaNFrcVTypUajLYTQX1P4nCIJmak
_Latest TWRP 3.2.1-0 For 8.1 mados(required) :*source: https://forum.xda-developers.com/devdb/project/dl/?id=27966
[_How to disable Driver Signature enforcement on Windows 10 : https://www.thewindowsclub.com/disable-driver-signature-enforcement-windows
_*( Or here with 2 ways) : https://www.howtogeek.com/167723/ho...8.1-so-that-you-can-install-unsigned-drivers/
_*disable Driver Signature Enforcement - Video : https://www.youtube.com/watch?v=Z6HbmjXONuk
__Official SP Flash Tool & Drivers For Windows & Linux : https://spflashtool.com/ [Guide for SP-Flash-Tool,how to use Android MTK Tool & How to manually install MediaTek USB VCOM drivers]
__Volcano box V3.1.0 : https://xdarom.com/volcano-box-latestupdate-3-09-full-setup-file-download/ [support MT67xx - how to use]
__ Volcano Box V3.1.1 : https://www.blognox.com/what-is-volcano-box/ ( Added support for MTK 6797 - more Info about Volcano Box v3.1.1 )
__TWRP_ Kitchen .exe : https://mega.nz/#!U6xHRCgQ!xFxNivRwJ-D0_6ruHMPtnMJQtCYIIZAMjSm6iOOuYDs
__TWRP- Porter/Maker for Mediatek MT67XX 64bit & 32bit : https://androidfilehost.com/?fid=962021903579481564
*_source: https://forum.xda-developers.com/android/software/twrp-porter-maker-mediatek-mt67xx-32-t3681861
__image kitchen_x64 : https://mega.nz/#!0uRmAAYJ!f04lELXUaUk38V-xpxsCASQ2p2Ghm0Sic06n0Omn7wc
__All MTK FRP Scatter File Download Tool By Mobilefirmwares.tk.rar - (AFH) : https://androidfilehost.com/?fid=11410963190603893639
__ GSM FRP TOOL (Support All Android) : https://mega.nz/file/h24wTQKb#00hWpyn6rKq9KA5gGUvsrHILg-uoeros6CY8-qavs8o _(Compatibility:Vista,XP,W7,W8,W10 32/64 bit)
*__This Great Tool "normally" is for xiaomi devices, BUT ! works fine and for MTK devices,and has the ability to : Disabling driver's Signature / Installation all MTK drivers +VCOM drivers,MTK CDC USB drivers,etc
( Just,run it as administrator and follow the instructions ) - For example ,if you want to flashing your device by using SP-Flash Tool etc...
_Download from MEGA CLOUD - xdi_1.0.3 .exe : https://mega.nz/#!cr4SUIqY!Rzlftk2OFun8XIkNQb2aXRtP7-t3f4DB92vMIl90pgw - Supports Windows x64 & x86 (Windows Vista, 7, 8, 8.1,10)
_MediaFire : http://www.mediafire.com/file/c1fflk7xvpkcr8d/xdi_1.0.3.exe/file
*Source: https://xiaomi-miui.gr/community/in...τά-Xiaomi-σε-όλα-τα-Windows-x64-x86/?pageNo=1
[ IMPORTANT ! : LIST ON SP-Flash Tool ERRORS CODES, MEANINGS & HOW TO FIX ! _ (Solution- What steps you can take to Fix & Resolve) _
https://forum.hovatek.com/thread-439.html ]
**__ Threads about Vernee Apollo Lite MT6797 : https://forum.xda-developers.com/t/vernee-apollo-lite
_Find various drivers here: https://gsmusbdrivers.com/
" I hope to help some users to find here what they need for installation & guide"
- I have no responsibility for what doing every one user on his device -
sry for english & GL to All
Thx for this usefull list. This means a lott.
You are amazing. This is the holy guide ! Thank you....
I lost my IMEI again when flashing as firmware upgrade from stock to Mad 7.1. It all began when I had a no sim card issue and I wrongly did a "format and download" Anyway, the phone works okay on stock after manually adding IMEI. My question is
1. Can I flash IMEI after I do a fresh install of MAD 8.1 with a TWRP recovery using SN write tool? ( I'm almost sure I'll lose my IMEI even if I'm on firmware upgrade mode)
2. You suggested earlier about doing a clean install of MAD 8.1 as stock. Is there a scatter file for that in the Apollo_lite_All zip? I didn't proceed as I wanted to know if I could flash IMEI after I do flash TWRP recovery.
Is this a useful guide to follow?
https://www.google.co.uk/amp/s/afterroot.wordpress.com/2015/07/22/mtk-restore-nvram-bin/amp/
Sorry if I'm bring stupid and thanks in advance...
drabharathan said:
I lost my IMEI again when flashing as firmware upgrade from stock to Mad 7.1. It all began when I had a no sim card issue and I wrongly did a "format and download" Anyway, the phone works okay on stock after manually adding IMEI. My question is
1. Can I flash IMEI after I do a fresh install of MAD 8.1 with a TWRP recovery using SN write tool? ( I'm almost sure I'll lose my IMEI even if I'm on firmware upgrade mode)
2. You suggested earlier about doing a clean install of MAD 8.1 as stock. Is there a scatter file for that in the Apollo_lite_All zip? I didn't proceed as I wanted to know if I could flash IMEI after I do flash TWRP recovery.
Is this a useful guide to follow?
https://www.google.co.uk/amp/s/afterroot.wordpress.com/2015/07/22/mtk-restore-nvram-bin/amp/
Sorry if I'm bring stupid and thanks in advance...
Click to expand...
Click to collapse
I do not know exactly what file it is and for which device is (in your Link)
In Apollo Lite All zip if you extract the file, inside included and the stock rom...If you extract stock rom will find "scatter" BUT ! STOCK ROM SCATTER !!
(scatter of mados 8.1 included on mados 8.1 zip if you extract this)
_For custom rom you can see here : https://forum.xda-developers.com/k4-note/how-to/guide-imei-fix-devices-custom-rom-t3630070
_For stock rom the easiest way is : https://androidmtk.com/download-sp-meta-tool
https://forum.hovatek.com/thread-12328.html
(You can use SN write tool only in stock rom)
You can see here my answer in old Post : https://forum.xda-developers.com/showpost.php?p=75866415&postcount=702
OR : Install terminal emulator > type su & then press enter to get permission > write this : echo ‘AT+EGMR=1,7,”1234567890”‘ >/dev/pttycmd1
& press enter > reboot device
(If you have dual SIM type & this line : echo ‘AT+EGMR=1,10,”1234567890”‘ >/dev/pttycmd1 ) & reboot device
(1234567890 is virtual IMEI ! ....you have to change with your real IMEI of course ! )
for terminal emulator root required
( http://www.androidbrag.com/2015/02/how-to-change-android-phoness-imei.html )
sry for english
The stock OS my phone came with has corrupted itself. It gets to the android screen then resets. Im trying to reinstall the stock OS using SP flash tool but when I select the scatter.txt file i get "Error scatter file invalid". Im using the ROM file from Vernee's website.
Any help??
Neospykx said:
The stock OS my phone came with has corrupted itself. It gets to the android screen then resets. Im trying to reinstall the stock OS using SP flash tool but when I select the scatter.txt file i get "Error scatter file invalid". Im using the ROM file from Vernee's website.
Any help??
Click to expand...
Click to collapse
http://www.mediafire.com/file/oox9f69tj2jf8k7/full_k15tb_a-ota-1508410813.zip/file
https://spflashtools.com/windows/sp-flash-tool-v5-1844
(close antivirus before)
Those where the files I was using that causes me the error message
Neospykx said:
Those where the files I was using that causes me the error message
Click to expand...
Click to collapse
The problem maybe is in File
a few solutions : first try with this file : https://mega.nz/#!Z3RwGT5L!2DTAhxDULqZ7TR8lNq8dUQpE94-HOwPtboRyRZd205s
(or another version SPFT sometimes)
(some times on mtk error 8417 : https://youtu.be/n-m-TqDQcFk )
Don't Install file on any partition disk..Install it on C: downloads normally
Previous versions do nothing when I hit the download button after setting the scatter file.
Now getting this error with the file you provided
https://ibb.co/pZzMrQN
Neospykx said:
Previous versions do nothing when I hit the download button after setting the scatter file.
Now getting this error with the file you provided
https://ibb.co/pZzMrQN
Click to expand...
Click to collapse
the error is included : https://forum.hovatek.com/thread-439.html
Try on another pc !
first try on other usb port , cable etc...
hi
mtk droid tool does not work in VAL?
thanks for the useful guide & info...
Sonbd said:
hi
mtk droid tool does not work in VAL?
thanks for the useful guide & info...
Click to expand...
Click to collapse
Unfortunately doesn't support MT6797 (you can not use it anymore to backup MT67xx chipsets)
did you install VCOM drivers and android CDC drivers? So,you can try with some other tool , depending on what you want to do...
Read in OP, there are many different tools...
Neospykx said:
Previous versions do nothing when I hit the download button after setting the scatter file.
Now getting this error with the file you provided
https://ibb.co/pZzMrQN
Click to expand...
Click to collapse
The official website downloads and the ones uploaded here saying "stock" full_k15tb_a-ota-1508410813 etc are OTAs and the scatter files on these don't load on SP flash tools.
Look for these file types. They have a good scatter file. You won't get the errors!
alps-mp-m0.mp9-V1.78.1_nb6797.6c.m_P10 – full_k15tb_a-user 6.0 MRA58K
Good luck.
drabharathan said:
The official website downloads and the ones uploaded here saying "stock" full_k15tb_a-ota-1508410813 etc are OTAs and the scatter files on these don't load on SP flash tools.
Look for these file types. They have a good scatter file. You won't get the errors!
alps-mp-m0.mp9-V1.78.1_nb6797.6c.m_P10 – full_k15tb_a-user 6.0 MRA58K
Good luck.
Click to expand...
Click to collapse
spft error 00xc0050003 is a matter of poorly installed drivers,maybe an old version SPFT etc...
the files in the OP works properly and I have used hundreds of times - by me and other users (scatter that contained in the file works fine)
There are & files from the official website of vernee like this
https://mega.nz/#!aQw1yQBL!LOWlnWgM05xySDXTbomnSeNKTcupbBuV-4Wmocz8GRM
http://www.vernee.cc/products/apollolite/rom/
daitalos said:
spft error 00xc0050003 is a matter of poorly installed drivers,maybe an old version SPFT etc...
the files in the OP works properly and I have used hundreds of times - by me and other users (scatter that contained in the file works fine)
There are & files from the official website of vernee like this
https://mega.nz/#!aQw1yQBL!LOWlnWgM05xySDXTbomnSeNKTcupbBuV-4Wmocz8GRM
http://www.vernee.cc/products/apollolite/rom/
Click to expand...
Click to collapse
Unfortunately, they didn't work for me. Which is why I replied to another persons query. The error message I got was invalid scatter file. Upon opening the scatter file in a text editor as well looked different. None of the links in the OP had a working scatter file for me. At the same tine both mad os 7.x and 8.x scatter files always worked.
I'm my opinion its more helpful to specify one SP flash version that works with one zip. Neither the Vernee Apollo Lite Pack All zip version, nor the one on the website worked for me. Windows 10, Nov update. Fresh Windows OS installs, VCom drivers etc. I've ruled out all of those along with random SP flash tool versions.
I just wanted to say, if you get an invalid scatter file error, perhaps worth trying what i suggested as well. It works well for me. Ever since my IMEI got wiped going back to stock is very often a routine, maybe not 100 times but many times.