Database Info

Help please tilt hangup

hey guys,,
i have a problem when i tried the hardspl ,
it seems i tried to use the simunlock first i am notsure, anyway , i have the tilt now in the boot loader option , tri-color, when i use the hardspl again it is not working, sometime it open the white screen but no transfer stoped at 0% ,
any ideas, please, thanks

http://forum.xda-developers.com/showthread.php?t=354061

i tried it but
i tried it and still not working ,
when i used mtty :
Cmd>
Cmd>boot
No card inserted
OEMIPLInit clear 10MB ext RAM
OEMGetUpdateMode
OEMTranslateBaseAddress 23 80000000 80000000
IPLMSG:0x8:INFO: Loading image ...
IPLMSG:0x9:INFO: Jumping to image...
OEMLaunchImage crc of Mini-Kernel:0x8128B626
OEMLaunchImage 80000000
Jump to Physical Address 10300000
and it keep just flashing white and back to tri color ,
and in this info says run jumspl from phone how u can do that and the phone not open only in boot loader mode!!

finaly
finaly , problem fixed by reflash the att flash and use winxp instead of vista ,,
but now when i open it ,, says att test only not for sale
how i can change that

m.basili said:
finaly , problem fixed by reflash the att flash and use winxp instead of vista ,,
but now when i open it ,, says att test only not for sale
how i can change that
Click to expand...
Click to collapse
flash one of my splash screens
located in my signature or on my file share.

Coby Kyros 9742 Boot issue

Hi
I have a big issue with my tablet: it doesn't start any more. it stucks at android logo. I rooted it with z4root (no failure before reboot). Any idea to get out this state ?
is it possible to boot from an external sd card ? with which firmware ?
Thanks a lot.
note : the hw reset button has no impact.

[Completed] Lenovo Brick after OTA Android 6 (Really need you help)

Hello guys,
I am in a really difficult situation here and i really need your help,
I am the owner of a Lenovo Vibe shot Z90a40. This phone had initially a chinese rom so i flashed a s240 ROW rom without any problems and it was just fine. Yesterday i found that there was an android 6 update (OTA) so i choosed YES (bad choice). The rom was downloaded, installed and when the phone rebooted it turned of by itself.
I powered it on again, stays in initial screen for 1 sec then vibrates for 2-3 secs and it shutdowns again.
So i tried to flash the previous rom again FAIL
the internal storage says write protected so flash (with Miflash generate a write protect error), i cannot access adb because the phone doesn't boot, cant use the sdfuse method (update from internal storage) because i cannot write anything to internal memmory and when i try to update through sd at about 50% says update fail.
I have tried every rom availiable no luck. I can see the internal partitions on my pc but can't access them.
Basically the problem is the write protection on internal storage.
I would really apreciate any advice,
Thanks in advance

Jimakosk said:
Hello guys,
I am in a really difficult situation here and i really need your help,
I am the owner of a Lenovo Vibe shot Z90a40. This phone had initially a chinese rom so i flashed a s240 ROW rom without any problems and it was just fine. Yesterday i found that there was an android 6 update (OTA) so i choosed YES (bad choice). The rom was downloaded, installed and when the phone rebooted it turned of by itself.
I powered it on again, stays in initial screen for 1 sec then vibrates for 2-3 secs and it shutdowns again.
So i tried to flash the previous rom again FAIL
the internal storage says write protected so flash (with Miflash generate a write protect error), i cannot access adb because the phone doesn't boot, cant use the sdfuse method (update from internal storage) because i cannot write anything to internal memmory and when i try to update through sd at about 50% says update fail.
I have tried every rom availiable no luck. I can see the internal partitions on my pc but can't access them.
Basically the problem is the write protection on internal storage.
I would really apreciate any advice,
Thanks in advance
Click to expand...
Click to collapse
Hi,
I couldn't find much information about your device here except this thread
Lenovo Z90-7 (VIBE SHOT) - International (ROW) ROM, multilanguage, GAPPS
Try posting your query there. Experts there may be able to assist you.
Good luck
Art Vanderlay
XDA Assist

[Completed] Woxter nimbus 98Q no boot

Hi
Ik have a Woxter Nimbus 98Q - RK3188 - that i tried to flash with the stock rom but the flash stopped .
Tablet was bricked but i unbricked it by connecting pin 7-8 on the nand chips.
After i did that the tablet has a black screen but i can hear he is booting because
the usb is showing up in the explorer and i see drive E and D but they are not accesseble .
With RKBatchtool i can flash the rom again and again with different roms with success but still no image even with
IDB erase . Roms came from the official woxter website and also tried other roms .
Tablet worked before so i know the screen is not bad .
Tried to boot with volume and power on = no result
tried to boot with sd card = no result
I'm out of options . Can someone help me ? Thx.

XDA Visitor said:
Hi
Ik have a Woxter Nimbus 98Q - RK3188 - that i tried to flash with the stock rom but the flash stopped .
Tablet was bricked but i unbricked it by connecting pin 7-8 on the nand chips.
After i did that the tablet has a black screen but i can hear he is booting because
the usb is showing up in the explorer and i see drive E and D but they are not accesseble .
With RKBatchtool i can flash the rom again and again with different roms with success but still no image even with
IDB erase . Roms came from the official woxter website and also tried other roms .
Tablet worked before so i know the screen is not bad .
Tried to boot with volume and power on = no result
tried to boot with sd card = no result
I'm out of options . Can someone help me ? Thx.
Click to expand...
Click to collapse
Hi,
There's no dedicated forum for your device here in XDA.
Kindly register yourself at XDA post which you can query in Android Q&A,Help and Troubleshooting .
Experts there may be able to help you

boot loop and other problems

Hey there,
I have complicated problem here ,
Model : Gt-P5100 samsung galaxy 2 10.1 (16gb)
ROM: Stock 4.2.2
main problem : Boot-Loop
__________
for some reason , the device is stuck in a boot loop , i have managed that problem 4 monthes ago by falshing stock rom
But Now , it didn't work, nor any other method mentioned here or any forum !!
1-Tried to flah Stock ---- didn't work
2-another stock ---didn't work
3-changed the version of stock ----didn't work
4-changed odin version ---didn't work
( i have also problem getting into download mode by key combo , so i used 300k tool !! , and recovery shows a dead android and wipe cache option gives an error !!)
throughout flashing , it gives at the middle of the process red "FAIL!" , with log error below nand start sh** , complete(write) operation failure !
after taking 40 minutes approximately !!
_____
5- I flashed a PIT , with a success , boot loop still there
6- I flashed recoveries , which didn't change the recovery i have with the dead android and error and e3 !!
7-I got black screen and tablet wouldn't turn on or charge anymore ( I think i forgot it in downlod mode untill full discharge !!)
8- I have opened it and removed the black cable of power and while it was in adaptor , that thing weirdly worked !!
9- But i still in boot-loop !!
10- I've used Cygwin to turn the rom into seperate "TARS" so i can flash them seperately with the right order >
11-as i remember flash sbl,boot modem ,recovery ,cache ,,,all success !!
12-getting to system.tar it took along time , and it has the failed with the same error write failed !!!!
____________________________
now i think technically every software problem has some solution , but what i have missed , any other solution or advice ??
please help , i don't see my stuff bricked without a fix

i don't know the main reason for that problem , i mean it may be due to some application which "obviously" cannot delete it , and ofcourse because i have let the tab for my young brother
sorry for inconvenience and my bad English too

ANYHELP ???????????

diabycool said:
Hey there,
I have complicated problem here ,
Model : Gt-P5100 samsung galaxy 2 10.1 (16gb)
ROM: Stock 4.2.2
main problem : Boot-Loop
__________
for some reason , the device is stuck in a boot loop , i have managed that problem 4 monthes ago by falshing stock rom
But Now , it didn't work, nor any other method mentioned here or any forum !!
1-Tried to flah Stock ---- didn't work
2-another stock ---didn't work
3-changed the version of stock ----didn't work
4-changed odin version ---didn't work
( i have also problem getting into download mode by key combo , so i used 300k tool !! , and recovery shows a dead android and wipe cache option gives an error !!)
throughout flashing , it gives at the middle of the process red "FAIL!" , with log error below nand start sh** , complete(write) operation failure !
after taking 40 minutes approximately !!
_____
5- I flashed a PIT , with a success , boot loop still there
6- I flashed recoveries , which didn't change the recovery i have with the dead android and error and e3 !!
7-I got black screen and tablet wouldn't turn on or charge anymore ( I think i forgot it in downlod mode untill full discharge !!)
8- I have opened it and removed the black cable of power and while it was in adaptor , that thing weirdly worked !!
9- But i still in boot-loop !!
10- I've used Cygwin to turn the rom into seperate "TARS" so i can flash them seperately with the right order >
11-as i remember flash sbl,boot modem ,recovery ,cache ,,,all success !!
12-getting to system.tar it took along time , and it has the failed with the same error write failed !!!!
____________________________
now i think technically every software problem has some solution , but what i have missed , any other solution or advice ??
please help , i don't see my stuff bricked without a fix
Click to expand...
Click to collapse
I can't change my rom, wipe / format doesn't work. Nothing changed after flashing with Odin.
16 GB Tab 2 have a known faulty EMMC (MAG2GA). It can happen, that your EMMC get "read only", so you can't perform any write actions (also you can't format) anymore.
From the EMMC data sheet:
5.1.7 End of Life Management:
The end of device life time is defined when there is no more available reserved block for bad block management in the device. When the device reaches to end of its life time, device shall change its state to permanent write protection state. In this case, write operation is not allowed any more but read operation are still allowed.
But, reliability of the operation can not be guaranteed after end of life.
On a faulty EMMC firmware it happens a lot faster.
What are the symptoms?
Uninstalled apps and deleted files are back after a reboot
Formating the storage doesn't work (after reboot the old rom and apps are back)
You can flash whatever you like via Odin - it showes "passed" but after reboot nothing changed (e.g. still no StockRom or still the old Recovery you had previously installed)
... there might be some more, but only to mention some ...
In most cases, the issue can be fixed by a EMMC firmware update, but you need someone who's able to do it (possible via ISP, nothing you can do esylie at home yourself). In some bad cases you need to find someone who can replace your EMMC.
source: andi34.github.io