Hey there,
I have complicated problem here ,
Model : Gt-P5100 samsung galaxy 2 10.1 (16gb)
ROM: Stock 4.2.2
main problem : Boot-Loop
__________
for some reason , the device is stuck in a boot loop , i have managed that problem 4 monthes ago by falshing stock rom
But Now , it didn't work, nor any other method mentioned here or any forum !!
1-Tried to flah Stock ---- didn't work
2-another stock ---didn't work
3-changed the version of stock ----didn't work
4-changed odin version ---didn't work
( i have also problem getting into download mode by key combo , so i used 300k tool !! , and recovery shows a dead android and wipe cache option gives an error !!)
throughout flashing , it gives at the middle of the process red "FAIL!" , with log error below nand start sh** , complete(write) operation failure !
after taking 40 minutes approximately !!
_____
5- I flashed a PIT , with a success , boot loop still there
6- I flashed recoveries , which didn't change the recovery i have with the dead android and error and e3 !!
7-I got black screen and tablet wouldn't turn on or charge anymore ( I think i forgot it in downlod mode untill full discharge !!)
8- I have opened it and removed the black cable of power and while it was in adaptor , that thing weirdly worked !!
9- But i still in boot-loop !!
10- I've used Cygwin to turn the rom into seperate "TARS" so i can flash them seperately with the right order >
11-as i remember flash sbl,boot modem ,recovery ,cache ,,,all success !!
12-getting to system.tar it took along time , and it has the failed with the same error write failed !!!!
____________________________
now i think technically every software problem has some solution , but what i have missed , any other solution or advice ??
please help , i don't see my stuff bricked without a fix
i don't know the main reason for that problem , i mean it may be due to some application which "obviously" cannot delete it , and ofcourse because i have let the tab for my young brother
sorry for inconvenience and my bad English too
ANYHELP ???????????
diabycool said:
Hey there,
I have complicated problem here ,
Model : Gt-P5100 samsung galaxy 2 10.1 (16gb)
ROM: Stock 4.2.2
main problem : Boot-Loop
__________
for some reason , the device is stuck in a boot loop , i have managed that problem 4 monthes ago by falshing stock rom
But Now , it didn't work, nor any other method mentioned here or any forum !!
1-Tried to flah Stock ---- didn't work
2-another stock ---didn't work
3-changed the version of stock ----didn't work
4-changed odin version ---didn't work
( i have also problem getting into download mode by key combo , so i used 300k tool !! , and recovery shows a dead android and wipe cache option gives an error !!)
throughout flashing , it gives at the middle of the process red "FAIL!" , with log error below nand start sh** , complete(write) operation failure !
after taking 40 minutes approximately !!
_____
5- I flashed a PIT , with a success , boot loop still there
6- I flashed recoveries , which didn't change the recovery i have with the dead android and error and e3 !!
7-I got black screen and tablet wouldn't turn on or charge anymore ( I think i forgot it in downlod mode untill full discharge !!)
8- I have opened it and removed the black cable of power and while it was in adaptor , that thing weirdly worked !!
9- But i still in boot-loop !!
10- I've used Cygwin to turn the rom into seperate "TARS" so i can flash them seperately with the right order >
11-as i remember flash sbl,boot modem ,recovery ,cache ,,,all success !!
12-getting to system.tar it took along time , and it has the failed with the same error write failed !!!!
____________________________
now i think technically every software problem has some solution , but what i have missed , any other solution or advice ??
please help , i don't see my stuff bricked without a fix
Click to expand...
Click to collapse
I can't change my rom, wipe / format doesn't work. Nothing changed after flashing with Odin.
16 GB Tab 2 have a known faulty EMMC (MAG2GA). It can happen, that your EMMC get "read only", so you can't perform any write actions (also you can't format) anymore.
From the EMMC data sheet:
5.1.7 End of Life Management:
The end of device life time is defined when there is no more available reserved block for bad block management in the device. When the device reaches to end of its life time, device shall change its state to permanent write protection state. In this case, write operation is not allowed any more but read operation are still allowed.
But, reliability of the operation can not be guaranteed after end of life.
On a faulty EMMC firmware it happens a lot faster.
What are the symptoms?
Uninstalled apps and deleted files are back after a reboot
Formating the storage doesn't work (after reboot the old rom and apps are back)
You can flash whatever you like via Odin - it showes "passed" but after reboot nothing changed (e.g. still no StockRom or still the old Recovery you had previously installed)
... there might be some more, but only to mention some ...
In most cases, the issue can be fixed by a EMMC firmware update, but you need someone who's able to do it (possible via ISP, nothing you can do esylie at home yourself). In some bad cases you need to find someone who can replace your EMMC.
source: andi34.github.io
Related
past few weeks , my HTC M8 keeps restarting and when i delete any data like pic , apps or such , it keeps comming back after restart and the new pics and apps gets deleted after restart .The phone shows update availiable when i download it says the file is corrupted .I tried to root , boot unlock , change stock firmware , hard reset , cleared cache , RUU , flash zip through fastboot . none works .most of the fastboot flash gets failed due to signature verify FAIL. phone is UK 3 mobile variant , unlocked . and I'm at India now . took it to service centers , they said they dont have the firmware/software for this phone ...... Can you guys please help me with this ... I have spend all my saving on this phone .. Please help me
tommytomsz said:
past few weeks , my HTC M8 keeps restarting and when i delete any data like pic , apps or such , it keeps comming back after restart and the new pics and apps gets deleted after restart .The phone shows update availiable when i download it says the file is corrupted .I tried to root , boot unlock , change stock firmware , hard reset , cleared cache , RUU , flash zip through fastboot . none works .most of the fastboot flash gets failed due to signature verify FAIL. phone is UK 3 mobile variant , unlocked . and I'm at India now . took it to service centers , they said they dont have the firmware/software for this phone ...... Can you guys please help me with this ... I have spend all my saving on this phone .. Please help me
Click to expand...
Click to collapse
Now ..when checked i can see some files from "bestsavesforyou" in my internal storage and android phone data...
i tried deleting the ones in internal storage ..it keeps coming back. tried deleting the ones in phone storage through mobileGO ..but cant do it
Thread closed, helping you out here instead.
Hello,
I just got a friend ZenFone 5 bricked !! Damn
I already read all available posts and threads regarding this but nothing helped.
What i did ?1
1- Phone was on Kitkat
2-i unlocked the BL
3-fastboot flashed TWRP
4- Tried to flash one of custom Roms available at XDA
5-When phone started to flash the rom ( after 4 or 5 seconds) twrp freezed
6-i wait for 15 minutes but nothing changed so i forced the phone to turn off by pressing buttons combination
Now the phone only Shows Intel Inside then an empty battery with a question mark inside!
No fastboot
No recovery
Almost Dead
------------------------------------------------------
What i tried ?!
1-tried the Debrick method using Does Files (Some one made it )
Code:
xfstk-dldr-solo.exe --fwdnx sec-dnx_fwr.bin --softfuse soft_fuse.bin --gpflags 0x80000305 --fwimage sec-ifwi-prod.bin --osdnx sec-dnx_osr.bin --osimage droidboot.img.POS_sign.bin
Operation Succeeded but Phone still at same condition
( of course Drivers for Cloverviewplus Device is installed correctly and PC is recognizing the phone)
2-Tried using xFSTK-Downloader also Success but same condition
3-Tried a friend Miracle Box solution (he said it was successful) but still phone at Intel Inside then an empty battery with question mark !!!
4-Tried to charge the phone for 24 hours and redid the operation but the same !
------------------------------
Any suggestions will be highly appreciated !
Problem Solved !
Check Here
Hello everyone, this my first post/question here so sorry if it's in the wrong place.
Shortly about 20 days ago I got a new Huawei y6 smartphone (which doesn't has warranty), it had some problems so I decided to just reflash the official ROM which I hardly found online, and since the phone is MT6582 (MTK based) I used the SP flasher (as I did in an Infinix one before and everything went fine !!), I turned off the phone, uploaded the scatter file, pressed download then connected the phone, and every thing went fine and I had a message "Done". just after that the phone won't turn on at all !
nor even a bootloop nothing just a black screen with the small nearly invisible red LED of the sensor as I think flashing.
And trying to reflash the ROM tells me that Error 4032,dram failed !!
Please help me I don't know what to do now and this really put me in a big problem now ! :crying:
Is it a bad ROM or because I (accidentally) marked the preloader to be downloaded with the file or what !?
Some tutorials say that it needs a preloader_fix.bin file which I can't find for that phone ... please help any suggestion will be acceptable. Thanks
Note : Before I did this I took a backup of the phone info :-
*BB Chip : MT6582
*MS Board : hwSCL-U31
*SW : ALPS.KK1.MP1.V2.11
*Custom build : 1467958675
*SW Version : C900B130
The ROM I downloaded : mega.nz/#!RU11EJ5b!4fjxZl9_G9uixtmHyfYnWrh_97gr3ozExFKuq3atGAs
dear
did you find a solution ??
i guess you can still access bootloader ?
try to flash the img through it
I had the same problrm but ( solved ) succesfully.
Hello MMavrick23
I had the same problem before ( error 4032 ). I solved it many times by using ( bin format flash file ) extracted from living device using ( Miracle Box ). Try to find the ( bin ) file or just look for living device and extract the rom in ( bin ) format and flash it to your dead device using ( Miracle Box ) . This's the best solution for ( error 4032 ) ever .
Regards
Okay i have a really big problem with my phone ( Huawei y7 prime 2017 TRT-L21a )
How the Problem Started :
the phone was working very fine while rooted and unlocked , didnt face any problem at all and once it happened that i decided to install Xposed framework and modules , i did install the latest and the most suitable for phone version yet no modules appeared so i had to go into twrp to install modules and stuff , i noticed that the phone couldnt boot and went into bootloop problem , had to format factory but ACCIDENTLY erased ALL data including SYSTEM , P.s im not a noob with root stuff , The Major problem showed up i Couldnt even get Past The sign of * ur phone is unlocked , OS is booting * , so i went on surfing the internet for answer and solutions but it was all invain for complete 30 hours without sleeping and having a heart attack !.... every time i proceed i find problems Like FRP LOCKED and USB DEBUGGING LOCKED and ADB DEVICE NOT SHOWN . UNABLE TO ENTER RECOVERY MOD , etc......
i ve Tried every thing and followed every video instructions , also xda developers instructions , And many websites .
i downloaded all compatible dload (update.app) zips and everything but i couldnt install them as they reach 5% and get stuck and the phone then reboots in loops
So now , 1) i dont have OS
2) no USB DEBUG
3) no FRP unlocked
4) no TWRP or Recovery ( the erecovery stucks at 61% and then reboot loops )
5) i have only got fastboot state and written on it phone unlocked.
So The Fix i need and i really have a big hope that it will fix it which is :
1) a way to unlock USB DEBUGGING for my bricked phone using Pc which i didnt find all over the internet
2) a way to install TWRP recovery using Pc (but not the ordinary method ) i need it to be installed through dload
3) ALL MY OS FILES STOCK ( RECOVERY - BOOT - SYSTEM and others )
Whoever find me a solution , i will be in his debt for a life time as im really Got nothing to do for it , im literally useless rn
MANY THANKS IN ADVANCE.
few days ago my phone just stop working . Like it was not charging , no recovery mode and nothing else . So according to internet its hard bricked .
then after couple hundred tries i got it up to odin mode and felt happy thinking now I can flash new rom . but it just stuck at initialing . and suddenly there's message saying use smart switch cause there was error updating the device . Then I used smart switch and even there it cannot recognize the device . So i thought let use sp flasing tool cause why not . I could not find scatter file . also i dont think that will work . I also flashed just the stock recovery and it worked but when i use it to flash or factory reset it just reboot to logo and next the recovery is gone again. NOw i have no idea what to do . can anyone please help me