Hello everyone, this my first post/question here so sorry if it's in the wrong place.
Shortly about 20 days ago I got a new Huawei y6 smartphone (which doesn't has warranty), it had some problems so I decided to just reflash the official ROM which I hardly found online, and since the phone is MT6582 (MTK based) I used the SP flasher (as I did in an Infinix one before and everything went fine !!), I turned off the phone, uploaded the scatter file, pressed download then connected the phone, and every thing went fine and I had a message "Done". just after that the phone won't turn on at all !
nor even a bootloop nothing just a black screen with the small nearly invisible red LED of the sensor as I think flashing.
And trying to reflash the ROM tells me that Error 4032,dram failed !!
Please help me I don't know what to do now and this really put me in a big problem now ! :crying:
Is it a bad ROM or because I (accidentally) marked the preloader to be downloaded with the file or what !?
Some tutorials say that it needs a preloader_fix.bin file which I can't find for that phone ... please help any suggestion will be acceptable. Thanks
Note : Before I did this I took a backup of the phone info :-
*BB Chip : MT6582
*MS Board : hwSCL-U31
*SW : ALPS.KK1.MP1.V2.11
*Custom build : 1467958675
*SW Version : C900B130
The ROM I downloaded : mega.nz/#!RU11EJ5b!4fjxZl9_G9uixtmHyfYnWrh_97gr3ozExFKuq3atGAs
dear
did you find a solution ??
i guess you can still access bootloader ?
try to flash the img through it
I had the same problrm but ( solved ) succesfully.
Hello MMavrick23
I had the same problem before ( error 4032 ). I solved it many times by using ( bin format flash file ) extracted from living device using ( Miracle Box ). Try to find the ( bin ) file or just look for living device and extract the rom in ( bin ) format and flash it to your dead device using ( Miracle Box ) . This's the best solution for ( error 4032 ) ever .
Regards
Related
Hello , this is my first post here , so sorry if i missed a detail or something
So as in the title , My friend's ZOPO C2 (B version) is bricked :
this is what happened , I rooted the phone for him , used Mobile Uncle Tools to run a custom recovery (TWRP) and downloaded this custom ROM MIUI7 (u can find it on Needrom.com
Everything went well at first , until I started getting these errors :
1) warning: no file_context
2) symlink: some symlinks failed
the option after was Reboot , i did so and (Great ! -_-) a bootloop , the phone is stuck on the ZOPO logo (the one u see at boot) and I can't access the recovery (Tried Volume Up + Power Button and Volume Down + Power button .... nothing)
Please help me , some tutorial online , say .. use SP flash tool , and I found some "Scatter files or something " to use with , but I can get it to work .
Is there any solution ?
Stormix_thedev said:
Hello , this is my first post here , so sorry if i missed a detail or something
So as in the title , My friend's ZOPO C2 (B version) is bricked :
this is what happened , I rooted the phone for him , used Mobile Uncle Tools to run a custom recovery (TWRP) and downloaded this custom ROM MIUI7 (u can find it on Needrom.com
Everything went well at first , until I started getting these errors :
1) warning: no file_context
2) symlink: some symlinks failed
the option after was Reboot , i did so and (Great ! -_-) a bootloop , the phone is stuck on the ZOPO logo (the one u see at boot) and I can't access the recovery (Tried Volume Up + Power Button and Volume Down + Power button .... nothing)
Please help me , some tutorial online , say .. use SP flash tool , and I found some "Scatter files or something " to use with , but I can get it to work .
Is there any solution ?
Click to expand...
Click to collapse
Greetings,
Thank you for using XDA Assist. There aren't any specific forums for your device on XDA. However, you may ask your questions here:
Android Q&A, Help & Troubleshooting
You will find expert help there. Good luck!
Hello all , i've installed Custom ROM LOLIPOP according to tutorial on this forum , but after 5 months i woke up and found my phone all service has been stopped , i've restarted the phone , but the phone was stuck at Sony logo , and nothing happens , i've tried to flash the ROM files again but i got message ' Ooops , You did it again ' , i went to someone that work on mobile phone development , and he told me that the RAM has been corrupted , but i'm not sure of what he said , i can open recovery mode , but i can't do anything , please help me , i've tried to connect phone to PC by Emma Sony program , it recognized the phone model and serial number but it told me message that mobile is locked , please help me
[email protected] said:
Hello all , i've installed Custom ROM LOLIPOP according to tutorial on this forum , but after 5 months i woke up and found my phone all service has been stopped , i've restarted the phone , but the phone was stuck at Sony logo , and nothing happens , i've tried to flash the ROM files again but i got message ' Ooops , You did it again ' , i went to someone that work on mobile phone development , and he told me that the RAM has been corrupted , but i'm not sure of what he said , i can open recovery mode , but i can't do anything , please help me , i've tried to connect phone to PC by Emma Sony program , it recognized the phone model and serial number but it told me message that mobile is locked , please help me
Click to expand...
Click to collapse
Since you can reach recovery mode,
Try flashing the rom I released few days ago in the development section.
Press thanks if I helped you
Sent from my C2305 using Tapatalk
abhishekr700 said:
Since you can reach recovery mode,
Try flashing the rom I released few days ago in the development section.
Press thanks if I helped you
Sent from my C2305 using Tapatalk
Click to expand...
Click to collapse
Dear , i appreciate your help, i have flashed your wonderful ROM, but it stops at 45% Extract:/system/lib/libicui18n.so , i've waited about 30 mins but nothing happens , i've tried it again and the same situation happened.
I just want to tell you that when checking system info menu item i got that system size used and free : -1 MB and internal size the same : -1 MB , Would it help ?
Thanks in advance.
[email protected] said:
Dear , i appreciate your help, i have flashed your wonderful ROM, but it stops at 45% Extract:/system/lib/libicui18n.so , i've waited about 30 mins but nothing happens , i've tried it again and the same situation happened.
I just want to tell you that when checking system info menu item i got that system size used and free : -1 MB and internal size the same : -1 MB , Would it help ?
Thanks in advance.
Click to expand...
Click to collapse
First of all to say thanks,you can press the thanks button on his/her post,it helps keeping xda clean and on track.
Now as for your problem what I think is that your system partition memory has corrupted,
Recovery is stored on separate partition so you are still able to access it.
Elsewhere your motherboard and all is intact cause you can run the rom installer and execute commands to.
I strongly recommend getting your phone to a service centre for help,
Noone here(I guess) can help you deal with hardware issues.
One more thing, have you tried restoring your system via wmshua flash tool,
You can find its tutorial easily in the forum. Try it before spending money
Press the thanks button if I helped you.
Sent from my C2305 using Tapatalk
Hey there,
I have complicated problem here ,
Model : Gt-P5100 samsung galaxy 2 10.1 (16gb)
ROM: Stock 4.2.2
main problem : Boot-Loop
__________
for some reason , the device is stuck in a boot loop , i have managed that problem 4 monthes ago by falshing stock rom
But Now , it didn't work, nor any other method mentioned here or any forum !!
1-Tried to flah Stock ---- didn't work
2-another stock ---didn't work
3-changed the version of stock ----didn't work
4-changed odin version ---didn't work
( i have also problem getting into download mode by key combo , so i used 300k tool !! , and recovery shows a dead android and wipe cache option gives an error !!)
throughout flashing , it gives at the middle of the process red "FAIL!" , with log error below nand start sh** , complete(write) operation failure !
after taking 40 minutes approximately !!
_____
5- I flashed a PIT , with a success , boot loop still there
6- I flashed recoveries , which didn't change the recovery i have with the dead android and error and e3 !!
7-I got black screen and tablet wouldn't turn on or charge anymore ( I think i forgot it in downlod mode untill full discharge !!)
8- I have opened it and removed the black cable of power and while it was in adaptor , that thing weirdly worked !!
9- But i still in boot-loop !!
10- I've used Cygwin to turn the rom into seperate "TARS" so i can flash them seperately with the right order >
11-as i remember flash sbl,boot modem ,recovery ,cache ,,,all success !!
12-getting to system.tar it took along time , and it has the failed with the same error write failed !!!!
____________________________
now i think technically every software problem has some solution , but what i have missed , any other solution or advice ??
please help , i don't see my stuff bricked without a fix
i don't know the main reason for that problem , i mean it may be due to some application which "obviously" cannot delete it , and ofcourse because i have let the tab for my young brother
sorry for inconvenience and my bad English too
ANYHELP ???????????
diabycool said:
Hey there,
I have complicated problem here ,
Model : Gt-P5100 samsung galaxy 2 10.1 (16gb)
ROM: Stock 4.2.2
main problem : Boot-Loop
__________
for some reason , the device is stuck in a boot loop , i have managed that problem 4 monthes ago by falshing stock rom
But Now , it didn't work, nor any other method mentioned here or any forum !!
1-Tried to flah Stock ---- didn't work
2-another stock ---didn't work
3-changed the version of stock ----didn't work
4-changed odin version ---didn't work
( i have also problem getting into download mode by key combo , so i used 300k tool !! , and recovery shows a dead android and wipe cache option gives an error !!)
throughout flashing , it gives at the middle of the process red "FAIL!" , with log error below nand start sh** , complete(write) operation failure !
after taking 40 minutes approximately !!
_____
5- I flashed a PIT , with a success , boot loop still there
6- I flashed recoveries , which didn't change the recovery i have with the dead android and error and e3 !!
7-I got black screen and tablet wouldn't turn on or charge anymore ( I think i forgot it in downlod mode untill full discharge !!)
8- I have opened it and removed the black cable of power and while it was in adaptor , that thing weirdly worked !!
9- But i still in boot-loop !!
10- I've used Cygwin to turn the rom into seperate "TARS" so i can flash them seperately with the right order >
11-as i remember flash sbl,boot modem ,recovery ,cache ,,,all success !!
12-getting to system.tar it took along time , and it has the failed with the same error write failed !!!!
____________________________
now i think technically every software problem has some solution , but what i have missed , any other solution or advice ??
please help , i don't see my stuff bricked without a fix
Click to expand...
Click to collapse
I can't change my rom, wipe / format doesn't work. Nothing changed after flashing with Odin.
16 GB Tab 2 have a known faulty EMMC (MAG2GA). It can happen, that your EMMC get "read only", so you can't perform any write actions (also you can't format) anymore.
From the EMMC data sheet:
5.1.7 End of Life Management:
The end of device life time is defined when there is no more available reserved block for bad block management in the device. When the device reaches to end of its life time, device shall change its state to permanent write protection state. In this case, write operation is not allowed any more but read operation are still allowed.
But, reliability of the operation can not be guaranteed after end of life.
On a faulty EMMC firmware it happens a lot faster.
What are the symptoms?
Uninstalled apps and deleted files are back after a reboot
Formating the storage doesn't work (after reboot the old rom and apps are back)
You can flash whatever you like via Odin - it showes "passed" but after reboot nothing changed (e.g. still no StockRom or still the old Recovery you had previously installed)
... there might be some more, but only to mention some ...
In most cases, the issue can be fixed by a EMMC firmware update, but you need someone who's able to do it (possible via ISP, nothing you can do esylie at home yourself). In some bad cases you need to find someone who can replace your EMMC.
source: andi34.github.io
Hello,
I just got a friend ZenFone 5 bricked !! Damn
I already read all available posts and threads regarding this but nothing helped.
What i did ?1
1- Phone was on Kitkat
2-i unlocked the BL
3-fastboot flashed TWRP
4- Tried to flash one of custom Roms available at XDA
5-When phone started to flash the rom ( after 4 or 5 seconds) twrp freezed
6-i wait for 15 minutes but nothing changed so i forced the phone to turn off by pressing buttons combination
Now the phone only Shows Intel Inside then an empty battery with a question mark inside!
No fastboot
No recovery
Almost Dead
------------------------------------------------------
What i tried ?!
1-tried the Debrick method using Does Files (Some one made it )
Code:
xfstk-dldr-solo.exe --fwdnx sec-dnx_fwr.bin --softfuse soft_fuse.bin --gpflags 0x80000305 --fwimage sec-ifwi-prod.bin --osdnx sec-dnx_osr.bin --osimage droidboot.img.POS_sign.bin
Operation Succeeded but Phone still at same condition
( of course Drivers for Cloverviewplus Device is installed correctly and PC is recognizing the phone)
2-Tried using xFSTK-Downloader also Success but same condition
3-Tried a friend Miracle Box solution (he said it was successful) but still phone at Intel Inside then an empty battery with question mark !!!
4-Tried to charge the phone for 24 hours and redid the operation but the same !
------------------------------
Any suggestions will be highly appreciated !
Problem Solved !
Check Here
my phone is infinix s4 model x626b 64 gb - 6 gb ram v305
tried flash
4 firmware same proplem
1-[Hovatek] Infinix X626B S4 (X626B-H623JKN-P-200928V311)
2-[Hovatek] Infinix S4 (X626B-H623JKN-P-200307V295)
3-Infinix_S4_X626b_MT6765_H623JK_V226_190509
4-Infinix_S4_X626B_MT6765_V305_200727 (most tried)
but it wont flash it says: status brom cmd fail (0xc0060005)
same proplem in all flash tools tried (sp flash tool - swd -)
and lastest version of sp dlash tool says da file dont match when i insert infinix s4 da file in version 1824 da file work well but still same error (0xc0060005) .....tried format all + dowenload same in sp flash tool and in swd when i choose format all + dowenload its says use this function pls insert dongle i dont understand ??..... what should i do i tried so many solution
like chang usb , port , firmware file and flash tool
restart computer
start as adminstrator -charge phone few hours ..its dont give me any screen or power on ....im sure the device charged i put it like 2 hours then try then put it like 7+ hours but stil the proplem ...meanwhile the computer read phone normally and make sound when i put phone in usb
2 days ago flashed lenovo a5000 successful without any proplems idk what the proplem with that device
i want fast solution plz thank u