my phone is infinix s4 model x626b 64 gb - 6 gb ram v305
tried flash
4 firmware same proplem
1-[Hovatek] Infinix X626B S4 (X626B-H623JKN-P-200928V311)
2-[Hovatek] Infinix S4 (X626B-H623JKN-P-200307V295)
3-Infinix_S4_X626b_MT6765_H623JK_V226_190509
4-Infinix_S4_X626B_MT6765_V305_200727 (most tried)
but it wont flash it says: status brom cmd fail (0xc0060005)
same proplem in all flash tools tried (sp flash tool - swd -)
and lastest version of sp dlash tool says da file dont match when i insert infinix s4 da file in version 1824 da file work well but still same error (0xc0060005) .....tried format all + dowenload same in sp flash tool and in swd when i choose format all + dowenload its says use this function pls insert dongle i dont understand ??..... what should i do i tried so many solution
like chang usb , port , firmware file and flash tool
restart computer
start as adminstrator -charge phone few hours ..its dont give me any screen or power on ....im sure the device charged i put it like 2 hours then try then put it like 7+ hours but stil the proplem ...meanwhile the computer read phone normally and make sound when i put phone in usb
2 days ago flashed lenovo a5000 successful without any proplems idk what the proplem with that device
i want fast solution plz thank u
Related
My phone was ok. I installed cwm recovery by mtk dorid tool. But , I wanted to install TWRP recovery by a pc software- during installation a warning message appeared and I clicked ok (something formatted – I did not remember). Then I lost my mobile network signal, null imei and null baseband. Then I install N9500_MTK6589_Miui_Revolution_4.5.23_Cwm via CWM recovery (2 times, but system closed automatically. But, third time after installation phone totally bricked ). Basically phone starts with startup sound, but with crushing screen. I was able to connect mtk dorid tool and it says Model: N9500- null baseband-null imei, then I tried to Install CWM recovery. Then phone totally bricked without starting. I tried everything from google to solve. Then I was able to firmware upgrade – stock rom (Only one time). Now, stock rom is not downloading. I used all sp flash tools. All the times one error appears –Brom Error: S_FT_Enable_DARM_Fail (4032).
Please anyone help me. (My Pc Detect My Phone as preloader usb vcom port, I am using windows 8.1 64 bit, no issue with driver software and sp flash tool)
Device Name: Symphony w 92, MTK 6589 , 1.2 GHz ,Quad Core , 4 GB rom . 512 Ram, 5 inch Capacitive Full Touch, (854*480),8MP Primary (Flash light) + 2MP Secondary.
Please Help me to solve .
Hi,
I can't find anything relevant on XDA for your device. Be sure anything you flash is for your exact make and model number of your device. Otherwise very bad outcomes can occur.
You will need to ask for help here,
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck!
Hello everyone, this my first post/question here so sorry if it's in the wrong place.
Shortly about 20 days ago I got a new Huawei y6 smartphone (which doesn't has warranty), it had some problems so I decided to just reflash the official ROM which I hardly found online, and since the phone is MT6582 (MTK based) I used the SP flasher (as I did in an Infinix one before and everything went fine !!), I turned off the phone, uploaded the scatter file, pressed download then connected the phone, and every thing went fine and I had a message "Done". just after that the phone won't turn on at all !
nor even a bootloop nothing just a black screen with the small nearly invisible red LED of the sensor as I think flashing.
And trying to reflash the ROM tells me that Error 4032,dram failed !!
Please help me I don't know what to do now and this really put me in a big problem now ! :crying:
Is it a bad ROM or because I (accidentally) marked the preloader to be downloaded with the file or what !?
Some tutorials say that it needs a preloader_fix.bin file which I can't find for that phone ... please help any suggestion will be acceptable. Thanks
Note : Before I did this I took a backup of the phone info :-
*BB Chip : MT6582
*MS Board : hwSCL-U31
*SW : ALPS.KK1.MP1.V2.11
*Custom build : 1467958675
*SW Version : C900B130
The ROM I downloaded : mega.nz/#!RU11EJ5b!4fjxZl9_G9uixtmHyfYnWrh_97gr3ozExFKuq3atGAs
dear
did you find a solution ??
i guess you can still access bootloader ?
try to flash the img through it
I had the same problrm but ( solved ) succesfully.
Hello MMavrick23
I had the same problem before ( error 4032 ). I solved it many times by using ( bin format flash file ) extracted from living device using ( Miracle Box ). Try to find the ( bin ) file or just look for living device and extract the rom in ( bin ) format and flash it to your dead device using ( Miracle Box ) . This's the best solution for ( error 4032 ) ever .
Regards
hello pls help me i bought a coolpad 8298-A01 working well with no issue so i tried to install gapps because it has none ..so i took google to get a twrp for it and i did not get any so i tried to port but got my device bricked after flashing device kept on rebooting ..now i search for the firmware online and i got it and try flashing it all Sp Flash Tool not working giving error ONLY v5.1532 that flashed it 100% but the device is not powering on nore even responding to charge only show red light when i connect to socket and system still detect it,,,please i need help
PHONE-COOLPAD_8298-A01
ANDROID VERSION - 5.1
CHIP -MT6735
RAM -2GB
ROM -8GB
THAKNS
I used Lineage os for 2 months . then I want to get my stock ROM back so I restored it from twrp and after restoration completed I found my phone IMEI no was empty and network not working so. I again install Lineage Os then Lineage boot animation started as normally but after 5 min black screen appears and my phone screen starts blinking Lenovo logo comes and then automatic power off this process happeneds again and again. So I tried to open twrp recovery but unfortunately its also not opening . now I have left fastboot mode and download mode .
I see many threads then I QFIL application that helps in flashing stock ROM I tried many time but my laptop always says sahara fail or sahara error. I am tired of that fail . I tried latest and old version of QFIL but not working in my laptop .... Can anyone help plz .....
Can I can install stock ROM with fastboot mode if yes plz guide me and give me fastboot commands ...
Thanks for making your precious time for reading my thread .....
Try to Clear Windows Registry , with CCleaner , Open Qfil with Administrator put firmware , remove battery , press vol + and power key , plug in battery and plug usb in , wait when the COM port is detected on Qfil , and start flash .
What is unable to flash download using sahara protocol ?? Why this happeneds ??
hello friend and thinks for ur tuto
i have this probleme with flash blackview s8
sp flach tool status download exception (0xC0050003)
i try mani pc and usb cable but same probleme
i try to flash partition one by one all done eccepte system.img its begine download and at 5 % disconect and have the message error
if you have somme solution for me a hope great