Hello , this is my first post here , so sorry if i missed a detail or something
So as in the title , My friend's ZOPO C2 (B version) is bricked :
this is what happened , I rooted the phone for him , used Mobile Uncle Tools to run a custom recovery (TWRP) and downloaded this custom ROM MIUI7 (u can find it on Needrom.com
Everything went well at first , until I started getting these errors :
1) warning: no file_context
2) symlink: some symlinks failed
the option after was Reboot , i did so and (Great ! -_-) a bootloop , the phone is stuck on the ZOPO logo (the one u see at boot) and I can't access the recovery (Tried Volume Up + Power Button and Volume Down + Power button .... nothing)
Please help me , some tutorial online , say .. use SP flash tool , and I found some "Scatter files or something " to use with , but I can get it to work .
Is there any solution ?
Stormix_thedev said:
Hello , this is my first post here , so sorry if i missed a detail or something
So as in the title , My friend's ZOPO C2 (B version) is bricked :
this is what happened , I rooted the phone for him , used Mobile Uncle Tools to run a custom recovery (TWRP) and downloaded this custom ROM MIUI7 (u can find it on Needrom.com
Everything went well at first , until I started getting these errors :
1) warning: no file_context
2) symlink: some symlinks failed
the option after was Reboot , i did so and (Great ! -_-) a bootloop , the phone is stuck on the ZOPO logo (the one u see at boot) and I can't access the recovery (Tried Volume Up + Power Button and Volume Down + Power button .... nothing)
Please help me , some tutorial online , say .. use SP flash tool , and I found some "Scatter files or something " to use with , but I can get it to work .
Is there any solution ?
Click to expand...
Click to collapse
Greetings,
Thank you for using XDA Assist. There aren't any specific forums for your device on XDA. However, you may ask your questions here:
Android Q&A, Help & Troubleshooting
You will find expert help there. Good luck!
Related
Hello,
My qmobile i9 was stuck on a bootloop due to flashing a wrong boot.img . i cannot even go to recovery mode . It just can go to the options of recovery mode | Factory Mode . when i select anyone of them the bootloop starts again . Seems Like the firmware has been corrupted . When i connect phone to pc it connects and disconnect simultaneously . Because of this i can't install the driver of the fone . And at while connected to pc it show that my device is offline . I'm so fed up ! Searching on the internet and forums here didn't helped me for the solution . Please ! help me out
Thank You.
SyedFaiz said:
Hello,
My qmobile i9 was stuck on a bootloop due to flashing a wrong boot.img . i cannot even go to recovery mode . It just can go to the options of recovery mode | Factory Mode . when i select anyone of them the bootloop starts again . Seems Like the firmware has been corrupted . When i connect phone to pc it connects and disconnect simultaneously . Because of this i can't install the driver of the fone . And at while connected to pc it show that my device is offline . I'm so fed up ! Searching on the internet and forums here didn't helped me for the solution . Please ! help me out
Thank You.
Click to expand...
Click to collapse
Try asking here [How to] [Root] Qmobile i9
or
because there is not a specific forum for your device, you can start your own thread here general/help
No reply, thread will be closed.
Hi ,
I have been reading a lot on xda developers about how to root,back up and flash a custom rom. I Successfully rooted my phone and got the supersu app too . I downloaded a few apps like greenify and fullscreen to test the waters of rooting . I also downloaded rom manager , TWRP & helium . Everything was going smooth when i was trying to make a back up from rom manager it wasnt letting me and phone would just reboot when i tried .
Then i was getting a little restless and tried to work on TWRP to install a recovery and an option that was on top of install a recovery . It gave me few options to which i said yes ( something related to back up in sd card ) . Then it asked me to press yes to reboot and since then my phone gets stuck at the samsung logo screen and if i press volume down + power + home then it gives me a screen where it says " downloading... do not turn off target !!" . On this screen the current binary is custom and so is the system status .
No other key combination that i know of is working .
PLEASE HELP .
Thanks in advance
Manik
XDA Visitor said:
Hi ,
I have been reading a lot on xda developers about how to root,back up and flash a custom rom. I Successfully rooted my phone and got the supersu app too . I downloaded a few apps like greenify and fullscreen to test the waters of rooting . I also downloaded rom manager , TWRP & helium . Everything was going smooth when i was trying to make a back up from rom manager it wasnt letting me and phone would just reboot when i tried .
Then i was getting a little restless and tried to work on TWRP to install a recovery and an option that was on top of install a recovery . It gave me few options to which i said yes ( something related to back up in sd card ) . Then it asked me to press yes to reboot and since then my phone gets stuck at the samsung logo screen and if i press volume down + power + home then it gives me a screen where it says " downloading... do not turn off target !!" . On this screen the current binary is custom and so is the system status .
No other key combination that i know of is working .
PLEASE HELP .
Thanks in advance
Manik
Click to expand...
Click to collapse
Hello, thank you for using XDA assist!
First, please create an account so you can post in other forums.
Here is the main forum area for your device:
(You should bookmark this)
http://forum.xda-developers.com/note-3-neo
After creating your account, please ask your question here:
http://forum.xda-developers.com/note-3-neo/help
The experts for your device are located there and will be able to help.
Good luck!
User has created an account and has asked for help in the link provided.
Thread closed.
Hi
Ik have a Woxter Nimbus 98Q - RK3188 - that i tried to flash with the stock rom but the flash stopped .
Tablet was bricked but i unbricked it by connecting pin 7-8 on the nand chips.
After i did that the tablet has a black screen but i can hear he is booting because
the usb is showing up in the explorer and i see drive E and D but they are not accesseble .
With RKBatchtool i can flash the rom again and again with different roms with success but still no image even with
IDB erase . Roms came from the official woxter website and also tried other roms .
Tablet worked before so i know the screen is not bad .
Tried to boot with volume and power on = no result
tried to boot with sd card = no result
I'm out of options . Can someone help me ? Thx.
XDA Visitor said:
Hi
Ik have a Woxter Nimbus 98Q - RK3188 - that i tried to flash with the stock rom but the flash stopped .
Tablet was bricked but i unbricked it by connecting pin 7-8 on the nand chips.
After i did that the tablet has a black screen but i can hear he is booting because
the usb is showing up in the explorer and i see drive E and D but they are not accesseble .
With RKBatchtool i can flash the rom again and again with different roms with success but still no image even with
IDB erase . Roms came from the official woxter website and also tried other roms .
Tablet worked before so i know the screen is not bad .
Tried to boot with volume and power on = no result
tried to boot with sd card = no result
I'm out of options . Can someone help me ? Thx.
Click to expand...
Click to collapse
Hi,
There's no dedicated forum for your device here in XDA.
Kindly register yourself at XDA post which you can query in Android Q&A,Help and Troubleshooting .
Experts there may be able to help you
Hello everyone, this my first post/question here so sorry if it's in the wrong place.
Shortly about 20 days ago I got a new Huawei y6 smartphone (which doesn't has warranty), it had some problems so I decided to just reflash the official ROM which I hardly found online, and since the phone is MT6582 (MTK based) I used the SP flasher (as I did in an Infinix one before and everything went fine !!), I turned off the phone, uploaded the scatter file, pressed download then connected the phone, and every thing went fine and I had a message "Done". just after that the phone won't turn on at all !
nor even a bootloop nothing just a black screen with the small nearly invisible red LED of the sensor as I think flashing.
And trying to reflash the ROM tells me that Error 4032,dram failed !!
Please help me I don't know what to do now and this really put me in a big problem now ! :crying:
Is it a bad ROM or because I (accidentally) marked the preloader to be downloaded with the file or what !?
Some tutorials say that it needs a preloader_fix.bin file which I can't find for that phone ... please help any suggestion will be acceptable. Thanks
Note : Before I did this I took a backup of the phone info :-
*BB Chip : MT6582
*MS Board : hwSCL-U31
*SW : ALPS.KK1.MP1.V2.11
*Custom build : 1467958675
*SW Version : C900B130
The ROM I downloaded : mega.nz/#!RU11EJ5b!4fjxZl9_G9uixtmHyfYnWrh_97gr3ozExFKuq3atGAs
dear
did you find a solution ??
i guess you can still access bootloader ?
try to flash the img through it
I had the same problrm but ( solved ) succesfully.
Hello MMavrick23
I had the same problem before ( error 4032 ). I solved it many times by using ( bin format flash file ) extracted from living device using ( Miracle Box ). Try to find the ( bin ) file or just look for living device and extract the rom in ( bin ) format and flash it to your dead device using ( Miracle Box ) . This's the best solution for ( error 4032 ) ever .
Regards
hello evryone ,
i am here for having some help on my brickd huawei , when i turn it on it stuck on the boot screen and the led turn on to red red blue red something like that , i can enter the the recovory mode [ it cwm recobory ] i tierd to install update.zip with install zip function ( the propre update file that the phone downloaded ) but i get a error ( status 7) file_getprop faild to start . .
i realy need helo guys ; ' ( it my 2thrd huawei phone that get briked , the reason why my phone is briked i tierd to install a rom that i downloaded from the huawei website for the phone , and it was compatible the info of the update was chc-04 g play mini android 5
anyway guys thxs for reading my problem hope someone can help me !
sorry for bad english !
download stock firmware and flash it via force upgrade by pressing 3 button..
ALHYUMA said:
hello evryone ,
i am here for having some help on my brickd huawei , when i turn it on it stuck on the boot screen and the led turn on to red red blue red something like that , i can enter the the recovory mode [ it cwm recobory ] i tierd to install update.zip with install zip function ( the propre update file that the phone downloaded ) but i get a error ( status 7) file_getprop faild to start . .
i realy need helo guys ; ' ( it my 2thrd huawei phone that get briked , the reason why my phone is briked i tierd to install a rom that i downloaded from the huawei website for the phone , and it was compatible the info of the update was chc-04 g play mini android 5
anyway guys thxs for reading my problem hope someone can help me !
sorry for bad english !
Click to expand...
Click to collapse
Fixed your device?
ALHYUMA said:
hello evryone ,
i am here for having some help on my brickd huawei , when i turn it on it stuck on the boot screen and the led turn on to red red blue red something like that , i can enter the the recovory mode [ it cwm recobory ] i tierd to install update.zip with install zip function ( the propre update file that the phone downloaded ) but i get a error ( status 7) file_getprop faild to start . .
i realy need helo guys ; ' ( it my 2thrd huawei phone that get briked , the reason why my phone is briked i tierd to install a rom that i downloaded from the huawei website for the phone , and it was compatible the info of the update was chc-04 g play mini android 5
anyway guys thxs for reading my problem hope someone can help me !
sorry for bad english !
Click to expand...
Click to collapse
Have you solved your issues?
If not provide me the following info
what emui version were you before
which recovery you installed
what emui version u downloaded