Hi
Ik have a Woxter Nimbus 98Q - RK3188 - that i tried to flash with the stock rom but the flash stopped .
Tablet was bricked but i unbricked it by connecting pin 7-8 on the nand chips.
After i did that the tablet has a black screen but i can hear he is booting because
the usb is showing up in the explorer and i see drive E and D but they are not accesseble .
With RKBatchtool i can flash the rom again and again with different roms with success but still no image even with
IDB erase . Roms came from the official woxter website and also tried other roms .
Tablet worked before so i know the screen is not bad .
Tried to boot with volume and power on = no result
tried to boot with sd card = no result
I'm out of options . Can someone help me ? Thx.
XDA Visitor said:
Hi
Ik have a Woxter Nimbus 98Q - RK3188 - that i tried to flash with the stock rom but the flash stopped .
Tablet was bricked but i unbricked it by connecting pin 7-8 on the nand chips.
After i did that the tablet has a black screen but i can hear he is booting because
the usb is showing up in the explorer and i see drive E and D but they are not accesseble .
With RKBatchtool i can flash the rom again and again with different roms with success but still no image even with
IDB erase . Roms came from the official woxter website and also tried other roms .
Tablet worked before so i know the screen is not bad .
Tried to boot with volume and power on = no result
tried to boot with sd card = no result
I'm out of options . Can someone help me ? Thx.
Click to expand...
Click to collapse
Hi,
There's no dedicated forum for your device here in XDA.
Kindly register yourself at XDA post which you can query in Android Q&A,Help and Troubleshooting .
Experts there may be able to help you
Related
Hi All ,
I have a xolo q1010i which was running on few custom roms previously before I managed to get the flash stock rom from (brieftutorials.com/how-to-unbrick-xolo-q1010i-by-installing-stock-rom/[/url])
Now I used the SP flash tool to unbrick it and install the stock rom, it worked fine until i found that the IMEI was lost.
Still i managed to insert imei using uncle tools and everything was fine.
this is where the problem starts:
I got an update OTA for KitKat and once I updated it the phone was stuck in a loop
So i connected sp flash tool and ran the 4.2.2 stock rom, but suddenly half way I got an error messasge and that was the end.
I have a black screen device on which nothing works, no logo , no charging light, no power + volume up, no power+volume up+down etc .
Not even lights,
Windows says an unidentified device detected and SP flash tool does'nt work.
Have no clue what to do , Is this the end ? or do I have to try the USB Jig / send it for Jtag repair ?
All comments & Ideas appreciated.
Thanks in advance
_____________
Hola,
I managed to resurrect my mobile, I tried Jtag to bypass the preloader by researching a lot ( thanks to my all posts china mobile website) then used SP tools to flash the stock rom ( thanks to Kalaishere XDA )
Finally its working on Jellybean.
I will soon update it and also fix the tiny issue with no imei number
Issue resolved, thread closed, thanks.
Hello , this is my first post here , so sorry if i missed a detail or something
So as in the title , My friend's ZOPO C2 (B version) is bricked :
this is what happened , I rooted the phone for him , used Mobile Uncle Tools to run a custom recovery (TWRP) and downloaded this custom ROM MIUI7 (u can find it on Needrom.com
Everything went well at first , until I started getting these errors :
1) warning: no file_context
2) symlink: some symlinks failed
the option after was Reboot , i did so and (Great ! -_-) a bootloop , the phone is stuck on the ZOPO logo (the one u see at boot) and I can't access the recovery (Tried Volume Up + Power Button and Volume Down + Power button .... nothing)
Please help me , some tutorial online , say .. use SP flash tool , and I found some "Scatter files or something " to use with , but I can get it to work .
Is there any solution ?
Stormix_thedev said:
Hello , this is my first post here , so sorry if i missed a detail or something
So as in the title , My friend's ZOPO C2 (B version) is bricked :
this is what happened , I rooted the phone for him , used Mobile Uncle Tools to run a custom recovery (TWRP) and downloaded this custom ROM MIUI7 (u can find it on Needrom.com
Everything went well at first , until I started getting these errors :
1) warning: no file_context
2) symlink: some symlinks failed
the option after was Reboot , i did so and (Great ! -_-) a bootloop , the phone is stuck on the ZOPO logo (the one u see at boot) and I can't access the recovery (Tried Volume Up + Power Button and Volume Down + Power button .... nothing)
Please help me , some tutorial online , say .. use SP flash tool , and I found some "Scatter files or something " to use with , but I can get it to work .
Is there any solution ?
Click to expand...
Click to collapse
Greetings,
Thank you for using XDA Assist. There aren't any specific forums for your device on XDA. However, you may ask your questions here:
Android Q&A, Help & Troubleshooting
You will find expert help there. Good luck!
Hello!
Few days ago, I tried to flash CM13 on my LG G3s. Something went wrong. My phone bricked and when I was trying to enter download mode i saw this :
-------------------------
DOWNLOAD MODE
-------------------------
Loading . . . . . . .
Press the Volum Up key untill you see the download screen.
[460] fastboot_init()
[560] USB init ept @ 0x1000c000
[580]udc_start()
[740] -- reset --
[750] -- portchange --
After this nothing were happening. Device manager don't see my phone in COM ports, but my D722 is in other devices and it's called "Android". How can I fix this? Without COM port i can't flash any KDZ :/ Is there another way to unbrick my phone?
Thanks for every reply
(excause me for my english, it's not perfect, but I'm still learning so... )
Schab98 said:
Hello!
Few days ago, I tried to flash CM13 on my LG G3s. Something went wrong. My phone bricked and when I was trying to enter download mode i saw this :
-------------------------
DOWNLOAD MODE
-------------------------
Loading . . . . . . .
Press the Volum Up key untill you see the download screen.
[460] fastboot_init()
[560] USB init ept @ 0x1000c000
[580]udc_start()
[740] -- reset --
[750] -- portchange --
After this nothing were happening. Device manager don't see my phone in COM ports, but my D722 is in other devices and it's called "Android". How can I fix this? Without COM port i can't flash any KDZ :/ Is there another way to unbrick my phone?
Thanks for every reply
(excause me for my english, it's not perfect, but I'm still learning so... )
Click to expand...
Click to collapse
Hello,
Thanks for using XDA Assist.
Try posting your query in http://forum.xda-developers.com/lg-g3/general/lg-g3s-beat-d722-thread-t3110048Experts there may be able to help you
___
v7
XDA Assist
:silly: delicious matter for xda-developers [!!help me!! my bricked device keeps reconnect and disconnect quickly 3 sec with my pc ;so I can't restore stock rom on my device]
hi guys,since two day I've flashed my device with wrong rom :angel:{I'm not know about flashing wrong rom because I browsed a lot of porting roms subject in some forums then I've become able to flash my device and I've knowledge about this operating but I believed like this "now I owned the world " :laugh:after installing custom recovery cwm and backuping overall the device}.
however I flashed three rom adapted with my tablet before porting the wrong rom.
in abbreviately,after wrong rom the tablet is in boot loop 5 sec and restart,is it stuck in manufacture lego
which are mayhem picture after flashing the wrong rom then restart again .
I try and try again to booting into custom recovery
but is unuseful the tablet not reach custom recovery with pressing (vol.up button +pwr.button)
or reach factory mod with pressing (vol.down button+pwr buttton).
now,I try to fix the problem when connect the tablet with my pc via usb cord
,my bricked device reconnect & disconnect with pc quickly almost 3 sec ,usb cable otg is perfect functional though
is it occurring (I able to driving the tablet but I am not able to flashing with flashing tools such as : sp flash tool & mtkdroid tools)
the trouble is not fix when pressing (vol.up or vol.down or both these or both these with pwr or pwr alone ) before plug otg cable with my pc.
I searched and watched solved mtk problem on youtube but my trouble is not similar anything of this problems
and nothing about this on sites and forums.:crying:
in addition to :
I disassembly the case of my tablet and disconnect the battery connection with tablet motherboard
but same result.
!!!!please tell my how to fix this trouble!!! and able to flash stock rom
detail device
name :CCIT A799W (china tablet)
cpu :mediatek 6572
intsd: 8G
RAM : 1g
ANDRO: 4.2.2 (jellybean)
board: HX-M706-MB-V1.1.0
N.B: the wrong rom is Lollifox_MT6572_Kitkat_Ajit_mtkroms-com exactly. they say: for mt6572 only (not mt6572 running kitkat )
for more info tell me and good luck for every body .
mohamed thebear said:
:silly: delicious matter for xda-developers [!!help me!! my bricked device keeps reconnect and disconnect quickly 3 sec with my pc ;so I can't restore stock rom on my device]
hi guys,since two day I've flashed my device with wrong rom :angel:{I'm not know about flashing wrong rom because I browsed a lot of porting roms subject in some forums then I've become able to flash my device and I've knowledge about this operating but I believed like this "now I owned the world " :laugh:after installing custom recovery cwm and backuping overall the device}.
however I flashed three rom adapted with my tablet before porting the wrong rom.
in abbreviately,after wrong rom the tablet is in boot loop 5 sec and restart,is it stuck in manufacture lego
which are mayhem picture after flashing the wrong rom then restart again .
I try and try again to booting into custom recovery
but is unuseful the tablet not reach custom recovery with pressing (vol.up button +pwr.button)
or reach factory mod with pressing (vol.down button+pwr buttton).
now,I try to fix the problem when connect the tablet with my pc via usb cord
,my bricked device reconnect & disconnect with pc quickly almost 3 sec ,usb cable otg is perfect functional though
is it occurring (I able to driving the tablet but I am not able to flashing with flashing tools such as : sp flash tool & mtkdroid tools)
the trouble is not fix when pressing (vol.up or vol.down or both these or both these with pwr or pwr alone ) before plug otg cable with my pc.
I searched and watched solved mtk problem on youtube but my trouble is not similar anything of this problems
and nothing about this on sites and forums.:crying:
in addition to :
I disassembly the case of my tablet and disconnect the battery connection with tablet motherboard
but same result.
!!!!please tell my how to fix this trouble!!! and able to flash stock rom
detail device
name :CCIT A799W (china tablet)
cpu :mediatek 6572
intsd: 8G
RAM : 1g
ANDRO: 4.2.2 (jellybean)
board: HX-M706-MB-V1.1.0
N.B: the wrong rom is Lollifox_MT6572_Kitkat_Ajit_mtkroms-com exactly. they say: for mt6572 only (not mt6572 running kitkat )
for more info tell me and good luck for every body .
Click to expand...
Click to collapse
Greetings,
Thanks for using XDA Assist.
There are no specific forums for your device so I ask that you post your questions here:
Android Q&A, Help and Troubleshooting
The experts you'll find there may be able to help you.
Good luck!
Hello,
I just got a friend ZenFone 5 bricked !! Damn
I already read all available posts and threads regarding this but nothing helped.
What i did ?1
1- Phone was on Kitkat
2-i unlocked the BL
3-fastboot flashed TWRP
4- Tried to flash one of custom Roms available at XDA
5-When phone started to flash the rom ( after 4 or 5 seconds) twrp freezed
6-i wait for 15 minutes but nothing changed so i forced the phone to turn off by pressing buttons combination
Now the phone only Shows Intel Inside then an empty battery with a question mark inside!
No fastboot
No recovery
Almost Dead
------------------------------------------------------
What i tried ?!
1-tried the Debrick method using Does Files (Some one made it )
Code:
xfstk-dldr-solo.exe --fwdnx sec-dnx_fwr.bin --softfuse soft_fuse.bin --gpflags 0x80000305 --fwimage sec-ifwi-prod.bin --osdnx sec-dnx_osr.bin --osimage droidboot.img.POS_sign.bin
Operation Succeeded but Phone still at same condition
( of course Drivers for Cloverviewplus Device is installed correctly and PC is recognizing the phone)
2-Tried using xFSTK-Downloader also Success but same condition
3-Tried a friend Miracle Box solution (he said it was successful) but still phone at Intel Inside then an empty battery with question mark !!!
4-Tried to charge the phone for 24 hours and redid the operation but the same !
------------------------------
Any suggestions will be highly appreciated !
Problem Solved !
Check Here