[Completed] [Q] Qmobile i9 stuck on a bootloop ! - XDA Assist

Hello,
My qmobile i9 was stuck on a bootloop due to flashing a wrong boot.img . i cannot even go to recovery mode . It just can go to the options of recovery mode | Factory Mode . when i select anyone of them the bootloop starts again . Seems Like the firmware has been corrupted . When i connect phone to pc it connects and disconnect simultaneously . Because of this i can't install the driver of the fone . And at while connected to pc it show that my device is offline . I'm so fed up ! Searching on the internet and forums here didn't helped me for the solution . Please ! help me out
Thank You.

SyedFaiz said:
Hello,
My qmobile i9 was stuck on a bootloop due to flashing a wrong boot.img . i cannot even go to recovery mode . It just can go to the options of recovery mode | Factory Mode . when i select anyone of them the bootloop starts again . Seems Like the firmware has been corrupted . When i connect phone to pc it connects and disconnect simultaneously . Because of this i can't install the driver of the fone . And at while connected to pc it show that my device is offline . I'm so fed up ! Searching on the internet and forums here didn't helped me for the solution . Please ! help me out
Thank You.
Click to expand...
Click to collapse
Try asking here [How to] [Root] Qmobile i9
or
because there is not a specific forum for your device, you can start your own thread here general/help

No reply, thread will be closed.

Related

My device shut down and not responding

hey guys. .
I upgraded my device to ICS . . every thing was okay except it doesn't connect ton the mobile network . . so I changed tho rom . .doesn't help so I tried to flash the original ICS rom using the computer , ,so I restarted the phone and entered the download mode; accidentally the cable disconnected . . the phone shut down and didn't open again. .
when I connect it to usb I hear usb in and out frequency , ,
don't know wt to do, help please . . .
ahmedabdalla said:
hey guys. .
I upgraded my device to ICS . . every thing was okay except it doesn't connect ton the mobile network . . so I changed tho rom . .doesn't help so I tried to flash the original ICS rom using the computer , ,so I restarted the phone and entered the download mode; accidentally the cable disconnected . . the phone shut down and didn't open again. .
when I connect it to usb I hear usb in and out frequency , ,
don't know wt to do, help please . . .
Click to expand...
Click to collapse
Bricked Go here http://forum.xda-developers.com/showthread.php?t=1942836
thanks

[Q] Karbonn A9+ Stock in download Mode

HI guys !
i wipe the cash of phone and now when i power on the phone or volkey down+power or volkey up+power, no matter what to do , the phone karbonn a9+ only start in download Mode !
Can SB Help me ! Can i restore or unbrick it or i must send it to Warranty ?
same problem
head_djmusic said:
HI guys !
i wipe the cash of phone and now when i power on the phone or volkey down+power or volkey up+power, no matter what to do , the phone karbonn a9+ only start in download Mode !
Can SB Help me ! Can i restore or unbrick it or i must send it to Warranty ?
Click to expand...
Click to collapse
so did you find any solution to this prob?
help me as well pls !!!!
rohanrana said:
so did you find any solution to this prob?
Click to expand...
Click to collapse
Karbonn A9+ dead after trying to backup rom !!! HELP !!!
Hello all, I have a karbonn A9+, with custom rom " BetterFlareBuild37 ".
Everything was working smoothly with the rom. I tried to backup my rom using " Rom Toolbox Pro".
It showed backing up and all, the my phone got power off. I thought its just a general restart but ever since my phone is not powering up atall !!!!
Nothings working !!, i cant even start the recovery mode as that is also not showing up.Revomed the battery and tried but no sign.Not even showing up any backlight while charging or usb connect.Please help its as good as dead now !!!!
HELP HELP HELP !!!

[Completed] Help ! Yu Yureka hard bricked. PC can't recognize any qualcomm port.

Hello Peeps.
In an attempt to update my rooted Yu yureka from 4.4 MiUi to cyanogen 12 official from fastboot , however the update completed successfully , the device got bricked and never turned on after that .
Nothing works , the phone isnt turning on , no fastboot , not even the light on the led is turning on when i connect it to charging or with PC . The PC isnt recognising if any device is connected to it when i connect my phone to my pc . There is hope with qualcomm emergency flash tool but for that my device needs to be connected to my pc with a port, which is not happening here .
Any help in any direction is highly appreciated. Thanks.
Edit: Yu Yureka aftersales is **** . No one responds to calls , no one replies to mails .There are no service centers. Nothing . Its a dead end here. :crying:
Hi, thank you for using XDA Assist. I found this which sounds exactly what you need, http://forum.xda-developers.com/yureka/help/question-qualcomm-download-mode-k-t3068040
Good luck!
Thread closed.

[Completed] Bricked ZOPO C2 - NEED HELP Please !

Hello , this is my first post here , so sorry if i missed a detail or something
So as in the title , My friend's ZOPO C2 (B version) is bricked :
this is what happened , I rooted the phone for him , used Mobile Uncle Tools to run a custom recovery (TWRP) and downloaded this custom ROM MIUI7 (u can find it on Needrom.com
Everything went well at first , until I started getting these errors :
1) warning: no file_context
2) symlink: some symlinks failed
the option after was Reboot , i did so and (Great ! -_-) a bootloop , the phone is stuck on the ZOPO logo (the one u see at boot) and I can't access the recovery (Tried Volume Up + Power Button and Volume Down + Power button .... nothing)
Please help me , some tutorial online , say .. use SP flash tool , and I found some "Scatter files or something " to use with , but I can get it to work .
Is there any solution ?
Stormix_thedev said:
Hello , this is my first post here , so sorry if i missed a detail or something
So as in the title , My friend's ZOPO C2 (B version) is bricked :
this is what happened , I rooted the phone for him , used Mobile Uncle Tools to run a custom recovery (TWRP) and downloaded this custom ROM MIUI7 (u can find it on Needrom.com
Everything went well at first , until I started getting these errors :
1) warning: no file_context
2) symlink: some symlinks failed
the option after was Reboot , i did so and (Great ! -_-) a bootloop , the phone is stuck on the ZOPO logo (the one u see at boot) and I can't access the recovery (Tried Volume Up + Power Button and Volume Down + Power button .... nothing)
Please help me , some tutorial online , say .. use SP flash tool , and I found some "Scatter files or something " to use with , but I can get it to work .
Is there any solution ?
Click to expand...
Click to collapse
Greetings,
Thank you for using XDA Assist. There aren't any specific forums for your device on XDA. However, you may ask your questions here:
Android Q&A, Help & Troubleshooting
You will find expert help there. Good luck!

[Completed] TWRP Problem after flash!

So,today i put TWRP coustom ROM,on my android phone.I put correct version for my mobile phone.After i did it this happens https://youtu.be/8AOITxumXEg[/url] everything is in video,i tried to connect to PC,but it connects for 2-3 seconds,then disconnects,and just in circle.
Hi !
We will be for more help if you would tell us what device model you use
Thank you !

Categories

Resources