Hello Peeps.
In an attempt to update my rooted Yu yureka from 4.4 MiUi to cyanogen 12 official from fastboot , however the update completed successfully , the device got bricked and never turned on after that .
Nothing works , the phone isnt turning on , no fastboot , not even the light on the led is turning on when i connect it to charging or with PC . The PC isnt recognising if any device is connected to it when i connect my phone to my pc . There is hope with qualcomm emergency flash tool but for that my device needs to be connected to my pc with a port, which is not happening here .
Any help in any direction is highly appreciated. Thanks.
Edit: Yu Yureka aftersales is **** . No one responds to calls , no one replies to mails .There are no service centers. Nothing . Its a dead end here. :crying:
Hi, thank you for using XDA Assist. I found this which sounds exactly what you need, http://forum.xda-developers.com/yureka/help/question-qualcomm-download-mode-k-t3068040
Good luck!
Thread closed.
Related
ive installed boot manager pro via zip file .. it was installed sucessfuly, when i restarted the phone it stuck on bootscreen without a logo on it.. i have no choice but to unplug the battery.. the problem is after i unplug the battery and plug it again the device wont turn on, cant go to recovery mode, cant be charge and i cant connect my phone to computer.. any solution for this????
Hi,
If what you flashed was not designed for your exact device, you may need a service center to repair your device now.
But you can ask for other opinions here in this dedicated thread for your device,
http://forum.xda-developers.com/showthread.php?t=2391801
Good luck!
Hello , I just tried flashing CM13 on my Motorola Moto G LTE xm1068 and now it wont open . I also tried opening it on download mode but it doesnt work . What can I do ? I also tried to charge it but still cant open it .
Hello,
Welcome to XDA.
It seems that you flashed something that was not for your device model number. This may or may not be repairable.
if the device will not charge, has no LED when plugged in, is not recognized by PC, makes no sound from device or PC when the device is connected to PC, does not vibrate when holding power button and will not boot to any of its modes then you are probably hard bricked permanently.
Try posting your question in the thread you got the CM13 from.
Register an XDA account to post and reply in the forums. Good luck.
Hi xda,
So I had a soft bricked Micromax Canvas a290 which boot looped and couldnt access recovery. I flashed it with a stock ROM. Now the phone is hard bricked, and I'm thinking probably because the rom I downloaded had issues. I looked up another stock rom from xdafirmware, and am trying to follow a tutorial on youtube on flashing a hard bricked device.
The issue I have here is this:
The tutorial says the phone is supposed to connect and disconnect every 7-8 seconds (evident by the sound windows makes when usb device is connected and disconnected).
The thing is, when I connect my device windows makes the connected sound, but the device doesnt disonnect. SP flash tool cant flash my phone. I have tried any and every button combination, but they dont seem to help.
I am an tech enthusiast myself, and I have flashed a lot of mtk soft bricked devices before, but I am totally stumped here.
Can anyone help?? Any ideas whats happening? Any help is greatly appreciated. Thank you.
Tiks_Baralous said:
Hi xda,
So I had a soft bricked Micromax Canvas a290 which boot looped and couldnt access recovery. I flashed it with a stock ROM. Now the phone is hard bricked, and I'm thinking probably because the rom I downloaded had issues. I looked up another stock rom from xdafirmware, and am trying to follow a tutorial on youtube on flashing a hard bricked device.
The issue I have here is this:
The tutorial says the phone is supposed to connect and disconnect every 7-8 seconds (evident by the sound windows makes when usb device is connected and disconnected).
The thing is, when I connect my device windows makes the connected sound, but the device doesnt disonnect. SP flash tool cant flash my phone. I have tried any and every button combination, but they dont seem to help.
I am an tech enthusiast myself, and I have flashed a lot of mtk soft bricked devices before, but I am totally stumped here.
Can anyone help?? Any ideas whats happening? Any help is greatly appreciated. Thank you.
Click to expand...
Click to collapse
Greetings and welcome to assist. I can find very little information for your device apart from this thread which may help, can you connect to the device just using fastboot ?
https://forum.xda-developers.com/android/general/tutorial-micromax-canvas-knight-a290-t2872896
Good Luck
Sawdoctor
Hello Friends,
Need your help in fixing my Nexus 4 Device
last time My Nexus 4 was running when i tried to install a custom Build rom (Nightly) from cynogenmod Using TWRP Recovery
now suddenly my nexus 4's USB port Stopped working but it was Charging ,
it doesnt work anymore Something went wrong and Now its NOT opening Recovery mode , Just blackScreen
It doest Detect my nexus 4 , I am able to open bootLoader Mode , but also it doesnt Detect fastboot Mode in my laptop.
it gives "Device Descrioptor request Failed error" i tried updating the drivers as well but doesnt work anymore
So i tried Changing the USB Port and replaced the part , but the problem remains the same ,
No Recovery , NO USB PORT.. Cant Fix my Nexus 4 Now
HELP ME GUYS ,
any suggestions would be appreciated .
Thanks
:crying::crying::crying::crying::crying::crying:
sarangd said:
Hello Friends,
Need your help in fixing my Nexus 4 Device
last time My Nexus 4 was running when i tried to install a custom Build rom (Nightly) from cynogenmod Using TWRP Recovery
now suddenly my nexus 4's USB port Stopped working but it was Charging ,
it doesnt work anymore Something went wrong and Now its NOT opening Recovery mode , Just blackScreen
It doest Detect my nexus 4 , I am able to open bootLoader Mode , but also it doesnt Detect fastboot Mode in my laptop.
it gives "Device Descrioptor request Failed error" i tried updating the drivers as well but doesnt work anymore
So i tried Changing the USB Port and replaced the part , but the problem remains the same ,
No Recovery , NO USB PORT.. Cant Fix my Nexus 4 Now
HELP ME GUYS ,
any suggestions would be appreciated .
Thanks
:crying::crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
Hello,
It seems more like a USB issue.
Please refer here https://forum.xda-developers.com/android/general/fix-unknown-usb-device-device-t3375320
Regards
Vatsal,
Forum Moderator.
Vatsal said:
Hello,
It seems more like a USB issue.
Please refer here https://forum.xda-developers.com/android/general/fix-unknown-usb-device-device-t3375320
Regards
Vatsal,
Forum Moderator.
Click to expand...
Click to collapse
hello Vatsal
It did tried this already , this didnt worked for me ..
:'(
so hello everyone my yuphoria y5010a is bricked but it is not totally bricked but fastboot and recovery is not accesable and the phone showing battery low splash screen(boot logo)only i tried method of sd card by dev @Titokhan but emmc dump is not helpful for me, i also tried with QFIL tool but port not showing i have installed qualcomm usb drivers and also adb is there.
anyone witch same problem and any dev who can help is needed.
thank you.
Hi try this press both vol+ n vol- together with battery removed. Then with buttons pressed insert battery n connect to system. U should see port no. I tried it once on snapdragon phone which is stuck on battery logo. Also I later learnt that battery logo is default fastboot mode. Try to flash from that screen. Plz post ur status.
bro i gave phone to sevice center they flashed stock rom on my device so iam good now but thANKS for helping me.