[Completed] [Q] Lenovo a706 hard brick pls help - XDA Assist

ive installed boot manager pro via zip file .. it was installed sucessfuly, when i restarted the phone it stuck on bootscreen without a logo on it.. i have no choice but to unplug the battery.. the problem is after i unplug the battery and plug it again the device wont turn on, cant go to recovery mode, cant be charge and i cant connect my phone to computer.. any solution for this????

Hi,
If what you flashed was not designed for your exact device, you may need a service center to repair your device now.
But you can ask for other opinions here in this dedicated thread for your device,
http://forum.xda-developers.com/showthread.php?t=2391801
Good luck!

Related

Asus Zenfone 5 problem stuck at usb logo

Hi Experts,
I was doing factory reset and my battery died in the middle of the process since then my phone is stuck at usb logo whenever i connect to pc/or turn it on it doesn't do anything.
asus.com/zentalk/data/attachment/forum/201501/16/182639lnd5bpp2db5yb5ub.jpg
s3.postimg.org/gfdfrfcz6/20150925_163022.jpg
4.postimg.org/9u8d47rst/20150925_164818.jpg
s11.postimg.org/dw1n6sajn/20150925_164917.jpg
I shout out to all the experts to help me as i have gave up try to almost all the solution online for doing flash firmware but no avail .
i just dont know which one is for myphone and how i have to install it.
PS Phone is not rooted.
Appreciate all ur help

[Completed] THL 4000 Bricked?

Hello....Few days ago my phone asked for an update without wire....i downloaded it and asked for install so i did...after restarting it stoped work...was the dead android on display...so today i downloaded the sp flash tool and i got a recovery file for my phone and the scatter file...and i tryed to install. Turned few colors on and at the finish sayed something about rom but i didnt read just pressed the ok...then didn't turned on anymore...when i connect it via usb...pop's the sound on and for 1 sec shows up in device mananger and then get off continuously...Can i do something to It? can i bring it back to life?
Hi,
I can't find a relevant thread for your device and issue, but you could ask for help here...http://forum.xda-developers.com/showthread.php?t=2259645
Good luck!

[Completed] LENOVO A816 (qualcomm based) flash HELP NEEDED!

I need HELP with my Lenovo A816.
My phone is stuck, it turns ON and turns off. It comes as far as Lenovo logo and that's it. When it turns on, just vibrates, comes to logo and shutsdown again, and keeps doing that all the time.
I can't access anymore recovery menu, only Lenovo recovery but it does not help at all.
I accidentaly erased Lenovo launcher.
It doesn't get recognized via USB-PC. I tried flashing tools Qualcomm emmc download tool, qpst etc...
Can someone guide me how to repair the phone (flash custom ROM).
I have my wifes A816 which is working ok (except it also needs flashing ROM because of the chinese junk apps nad gapps not working, but don't want to ruin this phone also). Maybe having another would help rescuing my A816.
Please, anybody HELP.
Hi,
as there is no specific subforum for your device, ask your question here after registering. Good luck!

[Completed] [Please help] MT6580 HARDBRICK ZENFONE GO ZC500TG - Z00VD

Hello, I'm Geberson, sorry for my bad english.
I have a trouble with a Zenfone Go ZC500TG also called Z00VD, I tried to do bootloader unlock process,
but when finished the process, the phone freezes, I unplug the battery from phone.
When I tried to Power ON....
NOTHING, Phone died...
When connect on PC appears a MediaTEK Preloader:
I installed the drivers but the Phone always changing he STATUS to three different STATUS (PRELOADER BOOTLOOP)
I cant access the Bootloader, the Phone DIED, I need some help with this... I dont know what I can do to FIX it. :crying:
The PCB of the Phone have these TestPoints, I can try another method?
Please help me, I'm desperate!
Gebaohey said:
Hello, I'm Geberson, sorry for my bad english.
I have a trouble with a Zenfone Go ZC500TG also called Z00VD, I tried to do bootloader unlock process,
but when finished the process, the phone freezes, I unplug the battery from phone.
When I tried to Power ON....
NOTHING, Phone died...
When connect on PC appears a MediaTEK Preloader:
I installed the drivers but the Phone always changing he STATUS to three different STATUS (PRELOADER BOOTLOOP)
I cant access the Bootloader, the Phone DIED, I need some help with this... I dont know what I can do to FIX it. :crying:
The PCB of the Phone have these TestPoints, I can try another method?
Please help me, I'm desperate!
Click to expand...
Click to collapse
Greetings and welcome to assist. I can find little information on your particular issue but I did find these threads that may help
https://forum.xda-developers.com/zenfone2/help/zenfone-zc500tg-boot-loop-how-to-fix-t3360718
https://forum.xda-developers.com/android/help/asus-zenfone-zc500tg-root-request-t3282861
Good Luck
Sawdoctor

Q:my yuphoria bircked it is in partial condition not able to access fastboot.

so hello everyone my yuphoria y5010a is bricked but it is not totally bricked but fastboot and recovery is not accesable and the phone showing battery low splash screen(boot logo)only i tried method of sd card by dev @Titokhan but emmc dump is not helpful for me, i also tried with QFIL tool but port not showing i have installed qualcomm usb drivers and also adb is there.
anyone witch same problem and any dev who can help is needed.
thank you.
Hi try this press both vol+ n vol- together with battery removed. Then with buttons pressed insert battery n connect to system. U should see port no. I tried it once on snapdragon phone which is stuck on battery logo. Also I later learnt that battery logo is default fastboot mode. Try to flash from that screen. Plz post ur status.
bro i gave phone to sevice center they flashed stock rom on my device so iam good now but thANKS for helping me.

Categories

Resources