so hello everyone my yuphoria y5010a is bricked but it is not totally bricked but fastboot and recovery is not accesable and the phone showing battery low splash screen(boot logo)only i tried method of sd card by dev @Titokhan but emmc dump is not helpful for me, i also tried with QFIL tool but port not showing i have installed qualcomm usb drivers and also adb is there.
anyone witch same problem and any dev who can help is needed.
thank you.
Hi try this press both vol+ n vol- together with battery removed. Then with buttons pressed insert battery n connect to system. U should see port no. I tried it once on snapdragon phone which is stuck on battery logo. Also I later learnt that battery logo is default fastboot mode. Try to flash from that screen. Plz post ur status.
bro i gave phone to sevice center they flashed stock rom on my device so iam good now but thANKS for helping me.
Related
Hello all developers and technicians....,,
i'm newbie here and just a normal user of android. would like to request any method to repair my poor xperia c.
one day my xperia c (unrooted) was automatically shutdown and when restart , cant boot and stuck on text "sony" .
i tried with reset buttom and so many methods of flashing and rooting to reinstall rom(custom or official).
but nothing found. Bcoz my main problem is that ....
'''''''''''pc can't detect my phone as mt65xx preloader in device manager, so no one of flash tools can't detect my phone and i can't go on next steps.''''''''(i made sure to connect usb while switching volume down key to get fastboot mode....but still nothing special.):crying:
my phone can be entered in 3e recovery mode(official cwm)and 3e works well(it can make factory reset , wipe data and update zip from sd card .......BUT it can't accept unsigned zip). i think my poor one is still alive ,right?
So, please, help me with any solution. bcoz its difficult to buy new one .
Bryan Lin said:
Hello all developers and technicians....,,
i'm newbie here and just a normal user of android. would like to request any method to repair my poor xperia c.
one day my xperia c (unrooted) was automatically shutdown and when restart , cant boot and stuck on text "sony" .
i tried with reset buttom and so many methods of flashing and rooting to reinstall rom(custom or official).
but nothing found. Bcoz my main problem is that ....
'''''''''''pc can't detect my phone as mt65xx preloader in device manager, so no one of flash tools can't detect my phone and i can't go on next steps.''''''''(i made sure to connect usb while switching volume down key to get fastboot mode....but still nothing special.):crying:
my phone can be entered in 3e recovery mode(official cwm)and 3e works well(it can make factory reset , wipe data and update zip from sd card .......BUT it can't accept unsigned zip). i think my poor one is still alive ,right?
So, please, help me with any solution. bcoz its difficult to buy new one .
Click to expand...
Click to collapse
try wmshua tools bro
Hi guys,
I rooted my MOTO G Falcon sometime ago, flashed the Mokee custom ROM. Recently I got an update of Mokee ROM and flashed it. While flashing SuperSU, I accidently flashed adb mini file as well. Now my phone doesn't turn on, it is stuck at the logo screen forever(Pitch Black theme bootup animation). Whenever I press my Volume down+power button, and try to get into recovery, it stops at the Teamwin logo(TWRP) and restarts again. onnected my phone to pc and when I check the devices conected in my taskbar, it shows fastboot falcon. But when I try to find my device using adb devices, it's showing no devices found. Please help, I don't know what I'm supposed to do. Please please help. Thanks in advance..
Guys please help. I tried following this tutorial. http://forum.xda-developers.com/moto-g/help/how-to-unbrick-moto-g-falcon-t3394788.
But my phone when it is in the bootscreen isn't recognised in the device manager. However, when I press volume down +power and goes into fastboot mode, phone is shown in the device manager as Motorola ADB Interface. I'm totally stuck, a noob. Please Help.
Guys .. I cannot see this anywhere .. Please help .. I don't know what to do ..
vivekp1410 said:
Guys .. I cannot see this anywhere .. Please help .. I don't know what to do ..
Click to expand...
Click to collapse
Flash recovery again.....
Hey guys i regularly follow ur posts and those are really helpful but its the first time i am writing as i am ****ed up with my xperia c4 device. Recently i upgraded my xperia c4 to android 6.0.1 marshmallow using your flash tool flash method as i had unlocked my bootloader. after that i found that my device isn't booting into recovery mode. whenever i tried to boot into recovery it stucks at sony xperia logo and after some while it restarts automatically to the system. So i thought the recovery might be deleted when i was flashing the firmware. i was using twrp recovery made by u guys
PHP:
http://forum.xda-developers.com/xperia-c5-ultra/development/bootloader-unlocked-custom-recovery-t3285521
so I flashed that again using fastboot mode and it failed to flash and after that my phone gone totally black. Now none of the switches are working when pressing the power key its not even vibrating. when plugging it to pc via usb top notification led shows red and its not blinking. and the phone is automatically disconnecting after a while. i tried to flash the rom again through flash tool but it is showing "the device is connected usb debugging is off".
I am going crazy. please guys help me to fix this.:crying:
Thanks
Kirito69 said:
Hey guys i regularly follow ur posts and those are really helpful but its the first time i am writing as i am ****ed up with my xperia c4 device. Recently i upgraded my xperia c4 to android 6.0.1 marshmallow using your flash tool flash method as i had unlocked my bootloader. after that i found that my device isn't booting into recovery mode. whenever i tried to boot into recovery it stucks at sony xperia logo and after some while it restarts automatically to the system. So i thought the recovery might be deleted when i was flashing the firmware. i was using twrp recovery made by u guys
PHP:
http://forum.xda-developers.com/xperia-c5-ultra/development/bootloader-unlocked-custom-recovery-t3285521
so I flashed that again using fastboot mode and it failed to flash and after that my phone gone totally black. Now none of the switches are working when pressing the power key its not even vibrating. when plugging it to pc via usb top notification led shows red and its not blinking. and the phone is automatically disconnecting after a while. i tried to flash the rom again through flash tool but it is showing "the device is connected usb debugging is off".
I am going crazy. please guys help me to fix this.:crying:
Thanks
Click to expand...
Click to collapse
Greetings and welcome to assist. I can see you have already found the correct place to ask your question here
http://forum.xda-developers.com/showthread.php?t=3370395
so I'll close this one up
Good Luck
Sawdoctor
Hi guys, i'm desperately writing this thread after asking for help in the Oppo Community forum without no luck.
I know that this is for R7 Plus but i hope that someone could help me with my beloved R7s.
Months ago i've succefully installed the Project Spectrum ROM and it worked fine until few weeks ago when i noticed a random system slow down, maybe after an automatic app update.
I tryed to uninstall few apps and reboot the phone several times but with no luck.
So i decided to wipe it and reinstall the Color OS following the walkthrough but something went wrong and now my OPPO R7s is in a strange bootloop without recovery and fastboot.
The strange things are these:
- if I press the power button all I can see is the OPPO Logo and the loading dots in slow-mo
- if i connect it directly to a Windows PC it is recognized as a generic "Android" terminal.
- if i connect it to a Windows PC pressing and holding POWER + VOLUME DOWN + VOLUME UP it's recognized as a QHSUSB_BULK
I'm not a noob, neither an engineer, but i've a bit of familiarity with computers and similar things so i've tried to follow this guide:
http://community.oppo.com/en/forum.php?mod=viewthread&tid=48654
Downloading this service repair rom : https://drive.google.com/file/d/0BybDE_sPI3b5cmgtU05fbXNobVU/view (from this related discussion : http://forum.xda-developers.com/r7-plus/help/r7s-service-romqpst-unbrick-t3493377)
Following the guide, when i try to execute MSM8x39Downloadtool.exe selecting the phone model (i've three choices xx080_32G, xx081_32G, xx082_32G - and i don't know which one is the correct one) the phone is not recognized as COM CONNECTED in none of the ports. If I also do the verification, clicking on the top right button, it shows FAILED on system.img file.
Can that be the problem?
I'm stuck guys and i don't know what to do.
Any help will be better then a christmas present
Thanks in advance!!
A.
Download this rom and place it in the internal sd and flash to downgrade from spectrum
https://s3.amazonaws.com/public.opp...d_ColorOS/Specified_ColorOS_R7sf_full_009.zip
kishd said:
Download this rom and place it in the internal sd and flash to downgrade from spectrum
https://s3.amazonaws.com/public.opp...d_ColorOS/Specified_ColorOS_R7sf_full_009.zip
Click to expand...
Click to collapse
Thanks kishd i'll give this a try!
The only thing i'm bit worried about is how to flash from the internal sd without recovery mode and fastboot...
I'll keep you updated!:good:
any news?did you manage to fix?
hello guys
i have a problem with my oppo RS7
it has a hard bricked and stucked on booting and booting..... I only have a MacBook Pro and not windows
is anyone over there that knows exactly how to unbrick it using a Mac ?!
I think i flashed the wrong ROM by mistake in canvas knight2 by twrp and after completing the installation there was option to reboot the phone and after tapping on it the phone becomes dead completely, nothings happening while pressing the power button , not going in recovery mode and don't showing the charging logo when I put it on charge , plz somebody help me :crying:
nishkarsh3696 said:
I think i flashed the wrong ROM by mistake in canvas knight2 by twrp and after completing the installation there was option to reboot the phone and after tapping on it the phone becomes dead completely, nothings happening while pressing the power button , not going in recovery mode and don't showing the charging logo when I put it on charge , plz somebody help me :crying:
Click to expand...
Click to collapse
I think you hard bricked your android. First connect your android to PC via USB and check it detects Qualcomm 9008 port in device manager. If yes then use qfil tool to flash your stock os to your android.
my phone micromax canvas night 2 hardbrick. dont show the boot logo.only show the penkin photo phone switch on mode...flashing proceess is compleate but dont boot the device only vibrate and show the penkin photo...what is this problem my phone please help...only fast boot flashing available in net any other flashing process in this phone ...so please help..