Can't turn s-off - AT&T, Rogers HTC One X, Telstra One XL

So I got the super cid to 1111111, and followed the instructions for turning the S-Off for my phone to the letter. I confirmed that by running the command "fastboot getvar cid" and got the super cid response of 11111111. Then I flashed Pac-Man rom pushed the zip, but when the rom booted, I couldn't enable USB Debugging because I couldn't use the touch screen.
Please help
Using:
Rom: re-flashed to Viper XL 3.6.6
Recovery: TWRP 2.4.4.4
Tried using pac-man rom.
Please keep help as simple as possible
Thanks

did you check for sure that you have supercid? fastboot getvar cid

Exactly what does the error say and how do you know for a fact you have s-cid?
Sent from Xparent Red using my Venomized Evita
---------- Post added at 12:48 AM ---------- Previous post was at 12:47 AM ----------
DvineLord said:
did you check for sure that you have supercid? fastboot getvar cid
Click to expand...
Click to collapse
Beat me to it
Sent from Xparent Red using my Venomized Evita

I ran the command "fastboot getvar cid" and it returned back with the 11111111 response.
Also the fail message is "FAILED (remote: 99 unknown fail)"

Did u search forums for that error, it is addressed many times
Sent from my HTC One X using xda premium

Could you please point me to the form that addresses that error?
Thanks
DESERT.TECH said:
Did u search forums for that error, it is addressed many times
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse

The soff thread
Sent from my One X using Xparent Green Tapatalk 2

Rule #1 for noobs: Learn to search
http://forum.xda-developers.com/showthread.php?t=2155071

Related

US ruu on HK One XL

How can I flash the us ruu on my HK version One XL?
Sent from my HTC One XL using XDA Premium HD app
get supercid
then flash the ruu
Sent from my HTC One X using XDA
niceppl said:
get supercid
then flash the ruu
Sent from my HTC One X using XDA
Click to expand...
Click to collapse
Work on HK One XL?
Sent from my HTC One XL using XDA Premium HD app
I'm the user of hk version HTC one XL too. I have referenced this post http://forum.xda-developers.com/showthread.php?t=1671396
I change HTC__622 to 11111111 on hex editor, but I stuck in pushing the modified file... it said no such file or directory @@?
fm.sakura0128 said:
I'm the user of hk version HTC one XL too. I have referenced this post http://forum.xda-developers.com/showthread.php?t=1671396
I change HTC__622 to 11111111 on hex editor, but I stuck in pushing the modified file... it said no such file or directory @@?
Click to expand...
Click to collapse
you could just use the
[TOOL] OneClick SuperCID for Unlocking Bootloader
or try this way...if you are not familiar with command lines.
adb push mmcblk0p4MOD /sdcard/mmcblk0p4MOD this?
you know what...
type
adb push
then drag the mmcblk0p4MOD file to the terminal/command
type a "space"
then type
/sdcard/mmcblk0p4MOD
---------- Post added at 02:28 AM ---------- Previous post was at 02:27 AM ----------
wilsonchuchu said:
Work on HK One XL?
Sent from my HTC One XL using XDA Premium HD app
Click to expand...
Click to collapse
yes...the asia ruu works on att/rogers....i dont see why not..
niceppl said:
you could just use the
[TOOL] OneClick SuperCID for Unlocking Bootloader
or try this way...if you are not familiar with command lines.
adb push mmcblk0p4MOD /sdcard/mmcblk0p4MOD this?
you know what...
type
adb push
then drag the mmcblk0p4MOD file to the terminal/command
type a "space"
then type
/sdcard/mmcblk0p4MOD
---------- Post added at 02:28 AM ---------- Previous post was at 02:27 AM ----------
yes...the asia ruu works on att/rogers....i dont see why not..
Click to expand...
Click to collapse
sorry, I made some thing wrong, I unlocked.
And now, I lock again and reset the cid to the generic value, HTC__622, followed to this post http://forum.xda-developers.com/showthread.php?p=26638060&highlight=fastboot+oem+lock#post26638060 to install 1.85
But the ruu installer still told me error 130, meant the Model ID is wrong?
Did anybody have the same problem?
fm.sakura0128 said:
sorry, I made some thing wrong, I unlocked.
And now, I lock again and reset the cid to the generic value, HTC__622, followed to this post http://forum.xda-developers.com/showthread.php?p=26638060&highlight=fastboot+oem+lock#post26638060 to install 1.85
But the ruu installer still told me error 130, meant the Model ID is wrong?
Did anybody have the same problem?
Click to expand...
Click to collapse
Need S-OFF
yeeson said:
Need S-OFF
Click to expand...
Click to collapse
so, I cannot do anything yet? Because the s-off method still in progress? http://forum.xda-developers.com/showthread.php?t=1639972&page=78
fm.sakura0128 said:
so, I cannot do anything yet? Because the s-off method still in progress? http://forum.xda-developers.com/showthread.php?t=1639972&page=78
Click to expand...
Click to collapse
About S-OFF,http://forum.xda-developers.com/showthread.php?t=1675882
So...after s-off we can flash ruu from us on HK one XL?
Sent from my HTC One XL using XDA Premium HD app
fm.sakura0128 said:
sorry, I made some thing wrong, I unlocked.
And now, I lock again and reset the cid to the generic value, HTC__622, followed to this post http://forum.xda-developers.com/showthread.php?p=26638060&highlight=fastboot+oem+lock#post26638060 to install 1.85
But the ruu installer still told me error 130, meant the Model ID is wrong?
Did anybody have the same problem?
Click to expand...
Click to collapse
you need the supercid not the generic value.
supercid is 11111111
i don't think you need s-off
---------- Post added at 09:06 AM ---------- Previous post was at 09:05 AM ----------
in the end you need supercid with relocked bootloader... to flash any evita version of ruu
yeeson said:
About S-OFF,http://forum.xda-developers.com/showthread.php?t=1675882
Click to expand...
Click to collapse
Sir, I see there is an One XL with S-OFF in your signature, how would you do that?
I have an One XL which is HK version, but I have no idea that which post should I follow.
P.S. Another thing, is that US "ATT One X" & "HK One XL" are the same?
vodaben said:
Sir, I see there is an One XL with S-OFF in your signature, how would you do that?
I have an One XL which is HK version, but I have no idea that which post should I follow.
P.S. Another thing, is that US "ATT One X" & "HK One XL" are the same?
Click to expand...
Click to collapse
yes same like black and white iphone
Sent from my HTC One X using XDA
niceppl said:
yes same like black and white iphone
Sent from my HTC One X using XDA
Click to expand...
Click to collapse
So that means I can follow those AT&T instructions?
But they are in 1.82/1.75
The HK One XL is in 1.77
Still work?
loktin007 said:
So that means I can follow those AT&T instructions?
But they are in 1.82/1.75
The HK One XL is in 1.77
Still work?
Click to expand...
Click to collapse
yea... as long as you have root

Sensation stocked on beat audio logo help please

Hi guys please I need help here urgent I was running on GB before I rooted my phone then gain S-OFF try flashing a custom rom which are viperS and ARHD all failed to work rather than stock on beat audio logo and I have flash the firmware to 3.33 but still yet no progress. And I don't have the backup of the current rom so am in real mess now I really need your help please.
Sent from my HTC Sensation Z710e using xda app-developers app
9ja Droid boy said:
Hi guys please I need help here urgent I was running on GB before I rooted my phone then gain S-OFF try flashing a custom rom which are viperS and ARHD all failed to work rather than stock on beat audio logo and I have flash the firmware to 3.33 but still yet no progress. And I don't have the backup of the current rom so am in real mess now I really need your help please.
Sent from my HTC Sensation Z710e using xda app-developers app
Click to expand...
Click to collapse
fastboot getvar all
copy the output of this command excluding IMEI and Serial No. into a post. Also what does your hboot say?
How can I get the fastboot getvar all of a thing I don't know how to obtain it. Mean while my hboot was formerly 1.18. Then I now updated it to 1.27.1100
Sent from my HTC Sensation Z710e using xda app-developers app
9ja Droid boy said:
How can I get the fastboot getvar all of a thing I don't know how to obtain it. Mean while my hboot was formerly 1.18. Then I now updated it to 1.27.1100 and my IMEI is ************
S/N **************
Sent from my HTC Sensation Z710e using xda app-developers app
Click to expand...
Click to collapse
edit your post to remove IMEI and serial no, I dont need them and you should not give then away lightly - I did say EXCLUDING those (meaning dont post them)
for fastboot commands you need to download the adb and fastboot files, they are available from the all in one S-OFF (hboot 1.1x.xxxx), SuperCID etc guide thread in the dev section
Jonny said:
edit your post to remove IMEI and serial no, I dont need them and you should not give then away lightly - I did say EXCLUDING those (meaning dont post them)
for fastboot commands you need to download the adb and fastboot files, they are available from the all in one S-OFF (hboot 1.1x.xxxx), SuperCID etc guide thread in the dev section
Click to expand...
Click to collapse
I already have fastboot what I meant was that I don't know how to do the fastboot getvar all please can you tell me how.
Sent from my HTC Sensation Z710e using xda premium
I will post the fastboot getvar commands later please were am now my system is not with me.
Sent from my HTC Sensation Z710e using xda premium
9ja Droid boy said:
I will post the fastboot getvar commands later please were am now my system is not with me.
Sent from my HTC Sensation Z710e using xda premium
Click to expand...
Click to collapse
Instructions when you get to a pc:
open command prompt, type:
cd C:\path_to_folder_with_fastboot_files
hit enter (eg for me it is cd C:\adb) then put phone into bootloader, connect it to pc and select fastboot usb mode on the phone, then type into command prompt:
fastboot getvar all
hit enter

[Q] software update?

Hello,
Upon many google searches I have come to believe that this phone has updated above 4.0.4.
I have complications updating so I came here with the following questions:
Did the at&t HTC one x finally get jellybean, or is that for other models?
if yes how can I update because I see get an error on the at&t software update tool, and I don't see anything in the "about" tab for updating like in other models.
Thanks :laugh:
Edit: I forgot to mention I'm stock and unrooted.
ozymandius95 said:
Hello,
Upon many google searches I have come to believe that this phone has updated above 4.0.4.
I have complications updating so I came here with the following questions:
Did the at&t HTC one x finally get jellybean, or is that for other models?
if yes how can I update because I see get an error on the at&t software update tool, and I don't see anything in the "about" tab for updating like in other models.
Thanks :laugh:
Click to expand...
Click to collapse
Power off phone and press volume down and power back up without releasing the volume down button. That gets you into bootloader. What's it say in there?
Sent from my HTC One XL using xda premium
31ken31 said:
Power off phone and press volume down and power back up without releasing the volume down button. That gets you into bootloader. What's it say in there?
Sent from my HTC One XL using xda premium
Click to expand...
Click to collapse
Quite a lot, anything specific to look for?
ozymandius95 said:
Quite a lot, anything specific to look for?
Click to expand...
Click to collapse
The first section. It's about 7-8 lines of text. Tells hboot version and radio version info, s-on or s-off?
Sent from my HTC One XL using xda premium
Relocked
Evita PVT SHIP S-ON RL
HBOOT - 1.14.002
RADIO O-0.19as.32.09.11_2
OpenDSP-v29.1.0.45.0622
eMMC-boot
Jun 11 2012,14:36:28
31ken31 said:
The first section. It's about 7-8 lines of text. Tells hboot version and radio version info, s-on or s-off?
Sent from my HTC One XL using xda premium
Click to expand...
Click to collapse
Relocked
Evita PVT SHIP S-ON RL
HBOOT - 1.14.002
RADIO O-0.19as.32.09.11_2
OpenDSP-v29.1.0.45.0622
eMMC-boot
Jun 11 2012,14:36:28
According to the bootloader text, the phone was previously bootloader unlocked, and then relocked. Its probably also SuperCID, since this is the only way to unlock the bootloader on the AT&T version. Phone is also S-on.
Be aware that installing the AT&T Jellybean RUU with SuperCID + S-on will brick the phone. Advise you either change the phone back to the AT&T CID, or achieve S-off prior to running RUU or OTA or you will brick.
redpoint73 said:
According to the bootloader text, the phone was previously bootloader unlocked, and then relocked. Its probably also SuperCID, since this is the only way to unlock the bootloader on the AT&T version. Phone is also S-on.
Be aware that installing the AT&T Jellybean RUU with SuperCID + S-on will brick the phone. Advise you either change the phone back to the AT&T CID, or achieve S-off prior to running RUU or OTA or you will brick.
Click to expand...
Click to collapse
Oh my, how do I revert back to AT&T CID?
EDIT:
OK I found out how, but just to make sure it's "CWS__001" right?
ozymandius95 said:
Oh my, how do I revert back to AT&T CID?
EDIT:
OK I found out how, but just to make sure it's "CWS__001" right?
Click to expand...
Click to collapse
Yes that's correct. But doesnt the bootloader need to be unlocked to write the cid? I'd suggest unlocking the bootloader, flashing a stockish sense Rom, achieve s-off. Then run 3.18 ruu to prep for the cm install.
Sent from my HTC One XL using xda premium
31ken31 said:
Yes that's correct. But doesnt the bootloader need to be unlocked to write the cid? I'd suggest unlocking the bootloader, flashing a stockish sense Rom, achieve s-off. Then run 3.18 ruu to prep for the cm install.
Sent from my HTC One XL using xda premium
Click to expand...
Click to collapse
I checked my CID and it is CWS__001.
I don't know if that's necessary.
ozymandius95 said:
I checked my CID and it is CWS__001.
I don't know if that's necessary.
Click to expand...
Click to collapse
If it's cws_001 go ahead and run ruu. Make sure u have a good charge on phone before you start. And good luck. Let us know how it goes.
Sent from my HTC One XL using xda premium
31ken31 said:
If it's cws_001 go ahead and run ruu. Make sure u have a good charge on phone before you start. And good luck. Let us know how it goes.
Sent from my HTC One XL using xda premium
Click to expand...
Click to collapse
Have any links for an RUU?
Im lost in a labyrinth of links
ozymandius95 said:
Have any links for an RUU?
Im lost in a labyrinth of links
Click to expand...
Click to collapse
Yeah give me a min. I know where it is
Sent from my HTC One XL using xda premium
---------- Post added at 07:52 PM ---------- Previous post was at 07:51 PM ----------
http://dl3.htc.com/application/RUU_..._10.130.32.34_release_signed_With_Partial.exe
Sent from my HTC One XL using xda premium
Just quickly, how did you check your CID?
Sent from my Evita
timmaaa said:
Just quickly, how did you check your CID?
Sent from my Evita
Click to expand...
Click to collapse
Using the all-in-one kit, there is an option to check CID
ozymandius95 said:
Using the all-in-one kit, there is an option to check CID
Click to expand...
Click to collapse
Ok cool, there's an app on the play store which doesn't return the correct CID, just thought I better check.
Sent from my Evita
31ken31 said:
Yeah give me a min. I know where it is
Sent from my HTC One XL using xda premium
---------- Post added at 07:52 PM ---------- Previous post was at 07:51 PM ----------
http://dl3.htc.com/application/RUU_..._10.130.32.34_release_signed_With_Partial.exe
Sent from my HTC One XL using xda premium
Click to expand...
Click to collapse
Everything went great!
Thanks for the link and the help,
ozymandius95 said:
I checked my CID and it is CWS__001.
Click to expand...
Click to collapse
Interesting, so the bootloader was unlocked at some point in time, but then relocked and the CID changed back. If the phone was purchased second-hand, the seller did better due diligence than most would.
---------- Post added at 09:30 AM ---------- Previous post was at 09:25 AM ----------
ozymandius95 said:
Have any links for an RUU?
Im lost in a labyrinth of links
Click to expand...
Click to collapse
I know you are all set with the RUU.
But don't know why folks make it so hard for themselves, when just about everything you will ever need for this device is in my Index thread, sticky at the top of Development:
http://forum.xda-developers.com/showthread.php?t=1671237
redpoint73 said:
Interesting, so the bootloader was unlocked at some point in time, but then relocked and the CID changed back. If the phone was purchased second-hand, the seller did better due diligence than most would.
---------- Post added at 09:30 AM ---------- Previous post was at 09:25 AM ----------
I know you are all set with the RUU.
But don't know why folks make it so hard for themselves, when just about everything you will ever need for this device is in my Index thread, sticky at the top of Development:
http://forum.xda-developers.com/showthread.php?t=1671237
Click to expand...
Click to collapse
The thing is people don't like to read and learn. It's always easier to beg for help. No offense to the op.
Also the stickies should be on top of every forum page. Then theres no excuse to not see them.
Sent from my HTC One XL using xda premium
new htc one xl user
i just got this htc one xl, it is not a carrier. i was wondering if any one could be of help as to how i can get jelly bean without having to root. Thank you, i m new to xda developers forum

(REQ) htc one xl s-off help

Hi
My HTC one xl ( Evita)
Hboot:2.10
Build:401
Android:4.1.1
And I unlock this phone
& I didn't. find any way for s-off this phone(facepalm method need super cid and I didn't find any thread for supercid this build.)
...... Please help me
Sent from my HTC One XL using Tapatalk
amindfa said:
I didn't. find any way for s-off this phone(facepalm method need super cid and I didn't find any thread for supercid this build.)
Click to expand...
Click to collapse
Facepalm is the only method. You need to use the manual hex edit method to change to SuperCID if not on the AT&T version.
I don't know this method (manual hex edit)
This method have a certain thread in this forum???
Please explain me this....
Sent from my HTC One XL using Tapatalk
Hex edit CID:
http://forum.xda-developers.com/showthread.php?t=2212737
Sent from my Evita
timmaaa said:
Hex edit CID:
http://forum.xda-developers.com/showthread.php?t=2212737
Click to expand...
Click to collapse
Just added this to my Index thread. No idea why I didn't think to put this on there earlier, as this question is frequently asked:
http://forum.xda-developers.com/showthread.php?p=26512322
I try this method (hex edit ) but my cid (build number ) not changed!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
amindfa said:
I try this method (hex edit ) but my cid (build number ) not changed!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
Build numbers is not the same as CID. Build number just refers to the Android version (such as 4.0.1).
You are rooted? How are you checking CID?
The proper way would be the command (as noted in the guide): fastboot oem readcid
my cid is htc__j15 and I try hex edit but not changed
amindfa said:
my cid is htc__j15 and I try hex edit but not changed
Click to expand...
Click to collapse
I asked how you are checking CID, and whether you are rooted, and you did not properly answer those questions.
We can't help if you don't respond properly to questions.
I unlock bootloader
I rooted my phone with supersu (flash supersu from cwm)
Is your hboot 2.15?
Sent from my VENOMized HoxL
amindfa said:
I unlock bootloader
I rooted my phone with supersu (flash supersu from cwm)
Click to expand...
Click to collapse
You still haven't answered how you're checking your CID. If you want help from people here you need to answer the questions they ask you.
Sent from my Evita
---------- Post added at 10:51 AM ---------- Previous post was at 10:51 AM ----------
area51avenger said:
Is your hboot 2.15?
Sent from my VENOMized HoxL
Click to expand...
Click to collapse
He's on the 2.10 hboot (Arabic version).
Sent from my Evita
Nobody can't help me???ii
Sent from my HTC One XL using Tapatalk
amindfa said:
Nobody can't help me???ii
Click to expand...
Click to collapse
You've been asked the same question 3 times now by 2 different people: How exactly are you checking CID?
We can't help you, if you don't answer our questions.
---------- Post added at 09:07 AM ---------- Previous post was at 09:05 AM ----------
amindfa said:
I unlock bootloader
I rooted my phone with supersu (flash supersu from cwm)
Click to expand...
Click to collapse
Have you confirmed you have root, such as using an app that requires root?
amindfa said:
Nobody can't help me???ii
Sent from my HTC One XL using Tapatalk
Click to expand...
Click to collapse
You're right, we can't help you, because you're not answering the questions we're asking you. If you decide to answer the questions we're asking then we can help you.
Sent from my Evita
I believe 2.10 has the same write protection that 2.14 has. Most likely he is required to use jet tool to downgrade firmware/hboot version first but there's no way to know if that risky procedure will work with an Arabic version..
Sent from my HTC One XL using xda app-developers app
My cid is HTC__j15
I check this by fastboot getvar cud & fastboot OEM readcid
In bootloader mod.
But my version of hboot is 2.10
My device is rooted (by flashing supersu.zip in cwm ) and my device is unlocked......................
Sent from my HTC One XL using Tapatalk
See comment above yours.
Sent from my Evita
exad said:
I believe 2.10 has the same write protection that 2.14 has. Most likely he is required to use jet tool to downgrade firmware/hboot version first but there's no way to know if that risky procedure will work with an Arabic version..
Click to expand...
Click to collapse
CID is write protected on hboot 2.14? I didn't know that. I knew it was on 2.15.
He has the Arabic version so it's the 2.10 hboot, but yeah I've never heard of write protection on the 2.14 hboot.
Sent from my Evita

[Q] at&t htc one x can i back to orginal stock 4.1.1??

hello guys :
i need your help my mobile phone at&t htc one x and i installed Magio rom i want to go back to the orginal stock 4.1.1 so please can you help me
my device is :
unlocked
s-on
hboot 2.14
rooted
any help please
Get s-off first, then run the 3.18 RUU.
Sent from my Evita.
timmaaa said:
Get s-off first, then run the 3.18 RUU.
Sent from my Evita.
Click to expand...
Click to collapse
i try to get s-off with facepalm way and i have erorr 99 to many links
The error 99 problem and its solution has been mentioned dozens of times in the Facepalm thread, did you search to try to fix it?
Sent from my Evita.
timmaaa said:
The error 99 problem and its solution has been mentioned dozens of times in the Facepalm thread, did you search to try to fix it?
Sent from my Evita.
Click to expand...
Click to collapse
No... can you send me the link of solution please:crying:
Seriously? Use the search feature. Search for "error 99" within the Facepalm thread and you'll get literally dozens of results where it explains what you need to do.
Sent from my Evita.
timmaaa said:
Seriously? Use the search feature. Search for "error 99" within the Facepalm thread and you'll get literally dozens of results where it explains what you need to do.
Sent from my Evita.
Click to expand...
Click to collapse
i change the rom to viper xl and i still have the error 99 <<too many links>>
joey jamal said:
i change the rom to viper xl and i still have the error 99 <<too many links>>
Click to expand...
Click to collapse
The solution to your problem has already been posted. If you don't want to follow the suggestion given by timmaaa, who has been quite helpful already, there is nothing else anyone can do for you.
Sent from my One X using XDA Premium 4 mobile app
joey jamal said:
i change the rom to viper xl and i still have the error 99
Click to expand...
Click to collapse
Here, I've done half the work for you. Here's a page that has the solution for the error 99 problem.
http://forum.xda-developers.com/showthread.php?t=2155071&page=119
Sent from my Evita.
timmaaa said:
Here, I've done half the work for you. These are the search results for "error 99" in the Facepalm thread.
http://forum.xda-developers.com/search.php?searchid=242699864
Sent from my Evita.
Click to expand...
Click to collapse
Timmaaa, doesn't look like the link is functioning properly. Providing it was going above and beyond, but it ought to be functional if its there.
Sent from my One X using XDA Premium 4 mobile app
Black!Jack said:
Timmaaa, doesn't look like the link is functioning properly. Providing it was going above and beyond, but it ought to be functional if its there.
Sent from my One X using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Edited, link updated.
Sent from my Evita.
first i use this solution :
There's your problem, you need error 92. When you get error 99 you need to force a reboot to bootloader by holding volume down and power then start again (without the adb reboot bootloader command because you're already in bootloader). Now you should get error 92.
and it's not work:crying::crying::crying::crying:
and i use this way :
Ok folks thanks to c5satelite and other helpful folks at S OFF PARTY AND IRC we figured out how to fix this whole "error 99" shenanigans.
Step 1. Download the latest stockish ROM (I used Viper 3.2.3)
Step 2. Boot into bootloader and fastboot flash the kernel.. then reboot back into recovery
Step 3. Wipe /system and factory reset in TWRP
Step 4. Install rom in TWRP
Step 5. For *Viper Only* Don't wipe in Aroma, and uncheck reboot at the end.
Step 6. Reboot into bootloader from recovery (Don't boot into the ROM)
Step 7. Follow the instructions in the OP to a T ... read reread.. go get some coffee.. and try again.. hopefully you see Error 92 and not 99
This worked for me with ViperROM on hboot 2.14
Thank you to all the folks involved you guys are rockstars from Mars!
and it's not work:crying::crying::crying::crying::crying::crying::crying:
please any help
still erorr 99 << to many links >>
Do you have SuperCID?
Sent from my Evita.
If you mean root yes i have
Sent from my HTC One XL using Tapatalk 2
No, I asked if you have SuperCID, that isn't the same as root.
Sent from my Evita.
I don't know what is the supercid?? And how i can have it???
Sent from my HTC One XL using Tapatalk 2
Please help im from Syria (we have war) no internet and electricity every time...
Sent from my HTC One XL using Tapatalk 2
You need a PC to check your CID. Do you have a working PC?
Sent from my Evita.
timmaaa said:
You need a PC to check your CID. Do you have a working PC?
Sent from my Evita.
Click to expand...
Click to collapse
yes i have
You need to have adb/fastboot and HTC drivers installed. You need to connect your phone in fastboot mode and issue the following fastboot command:
Code:
fastboot oem readcid
Sent from my Evita.

Categories

Resources