Database Info

[Q] ROM with HDMI/TV-Out

Hey guys,
is there any ROM out there with either working HDMI output or TV via the 3.5mm jack? I would prefer the newest one...
I´ve got an european device with stock 2.1 at the moment, but I don´t like it that much.
Can you help me?
Thanks

ColdCreek said:
Hey guys,
is there any ROM out there with either working HDMI output or TV via the 3.5mm jack? I would prefer the newest one...
I´ve got an european device with stock 2.1 at the moment, but I don´t like it that much.
Can you help me?
Thanks
Click to expand...
Click to collapse
This one is sure thing
http://forum.xda-developers.com/showthread.php?t=1332410
And this, should work
http://forum.xda-developers.com/showthread.php?t=1300246

Hey, thanks.
I will both check them out when my phone is back from repair.
Have a nice day

ColdCreek said:
Hey guys,
is there any ROM out there with either working HDMI output or TV via the 3.5mm jack? I would prefer the newest one...
I´ve got an european device with stock 2.1 at the moment, but I don´t like it that much.
TV-OUT via 3.5mm works on wanhu rom and HM xda special rc2. You have to flash first the the singapore 2.1 rom to make tv-out works on wanhu and xda special rc2.
Click to expand...
Click to collapse

Hey,
which resolution does the 3.5mm Video jack has then?
Or is it better to have an adapter from HDMI to DVI?
Greetings

ColdCreek said:
Hey,
which resolution does the 3.5mm Video jack has then?
Or is it better to have an adapter from HDMI to DVI?
Greetings
Click to expand...
Click to collapse
Presently I'm running mz cm6 rc4.... but if you want tv-out using 3.5mm cable I recommend HM xda special rc2. I used to be in that rom before. You can play games via tv-out with good resolution.
Don't forget to flash first the 2.1 Singapore stock rom through rsd lite or flash the nandroid of singapore 2.1 rom, here is the link...http://forum.xda-developers.com/showthread.php?t=1189663&page=2.

[Q] Looking for latest ROM

Hi,
What is the latest most updated ROM versions there is for TF101?
Did 4.2.2 JB came out already? Or is it still 4.1.2?
I'm still with 4.03 ICS by Revolver and there's not apparent update of this ROM brand.
I'm more interested in modified stock ROM's than CM based ROM's.
Thanks

gil80 said:
Hi,
What is the latest most updated ROM versions there is for TF101?
Did 4.2.2 JB came out already? Or is it still 4.1.2?
I'm still with 4.03 ICS by Revolver and there's not apparent update of this ROM brand.
I'm more interested in modified stock ROM's than CM based ROM's.
Thanks
Click to expand...
Click to collapse
Asus has not gone past 4.0.3 (build 9.2.1.27) and it has been over 6 months. I have heard rumors they have abandonned it.
If you want to go to JB, you will have to go with a CM, Paranoid Android, AOSP or AOKP build.
I will say this - IT IS SO WORTH IT! It is so much smoother and such.
I was running the TeamEOS 3 (4.1.X builds) and switched to the PA/CM10 hybrid last fall. Loved the PhabletUI over the tablet UI.
TeamEOS 4 came out with (4.2.X builds) and I jumped over to that. It is fully functoinal for what I use (including BT HID and GPS). No issues for me.
I had the 4.1.2 from MattmanWRX on my TF101 and showed it to a Stock Infinity user and he swore up and down my tablet was smoother and more fluid than his (with 2x the horsepower).
All of the 4.1.X and 4.2.X ROMs that I have run (TeamEOS, LiquidSmooth, MattmanWRX and the RaymanFX 4.2 0.8.0) had full keyboard dock support if you have that.
Keep in mind, 4.2.X is a PhabletUI, no tablet interface available. If you want the Tablet UI, stick with 4.1.X.

@frederuco
Thanks for the detailed reply. I had no idea they didn't go past 4.0.3.
Several of the main features that are important to me is fully functional HDMI output, Direct WiFi, Overclocking and playing HD content smoothly.
Can you tell which ROM will provide me with these function bug-free?
Thanks a bunch!

gil80 said:
@frederuco
Thanks for the detailed reply. I had no idea they didn't go past 4.0.3.
Several of the main features that are important to me is fully functional HDMI output, Direct WiFi, Overclocking and playing HD content smoothly.
Can you tell which ROM will provide me with these function bug-free?
Thanks a bunch!
Click to expand...
Click to collapse
EOS4 will be a beast once its finished, for now if your just coming from stock id recommend EOS3 (with kat kernel #70), hd playback/ heavy 3d games are improved greatly on these roms only issue you may find is input lag on hdmi, this was my experience when trying hdmi yet havnt seen it reported in the threads by anyone else yet.

gil80 said:
@frederuco
Thanks for the detailed reply. I had no idea they didn't go past 4.0.3.
Several of the main features that are important to me is fully functional HDMI output, Direct WiFi, Overclocking and playing HD content smoothly.
Can you tell which ROM will provide me with these function bug-free?
Thanks a bunch!
Click to expand...
Click to collapse
I cannot comment on WiFi Direct or HDMI, but OC to 1.4 is very good. Some tablets get RR and SoD with 1.5 and higher.
No issues with video playback.
My suggestion - backup using titanium backup, install TWRP from GooManager. Backup your current ROM, then install TeamEOS 4. Be sure to wipe cache, Davlik, format system and factory reset from TWRP.
Restore apps with TB and see if it works.
If not, wipe and restore your Revolver.

frederuco said:
I cannot comment on WiFi Direct or HDMI, but OC to 1.4 is very good. Some tablets get RR and SoD with 1.5 and higher.
No issues with video playback.
My suggestion - backup using titanium backup, install TWRP from GooManager. Backup your current ROM, then install TeamEOS 4. Be sure to wipe cache, Davlik, format system and factory reset from TWRP.
Restore apps with TB and see if it works.
If not, wipe and restore your Revolver.
Click to expand...
Click to collapse
I'm familiar with CWM but not TWRP, what's that?

gil80 said:
I'm familiar with CWM but not TWRP, what's that?
Click to expand...
Click to collapse
TWRP (Team Win Recovery Project) is a different style of recovery. It is touch based, has a file manager and a terminal emulator in it. I like it because it can reliably access both internal and microSD storage (no SD or USB).
Also, nandroid backups grab the kernel (CWM on the TF101 do not backup the kernel).
TWRP 2.3.2.3 is required for Android 4.2 ROMs because of the new file structure for multiple users. It will flash fine the first time with other (and older TWRP) but when you update, your data starts getting in nested folders in the /sdcard/.
Another thing, when you go to wipe, ALL of the wipes are in one are instead of spread around like in CWM.
You can also set it up to flash up to 10 files at a time.
I will say that TWRP does not seem to like ARHD, but it has worked fine with Revolver, and all the other 4.1 and 4.2 ROMs I have tried.
http://teamw.in/project/twrp2

gil80 said:
Several of the main features that are important to me is fully functional HDMI output, Direct WiFi, Overclocking and playing HD content smoothly.
Click to expand...
Click to collapse
I use HDMI (without audio so I can't confirm it works), it's overclocked to 1.5GHz and I'm playing 720p mkv scene releases in MX Player without issues. Can't say about Direct Wifi, I don't use that. All on Team EOS's latest 4.2.1 (haven't made the jump to 4.2.2 yet).

Guys, thank you so much for helping out. I will start to check these things out!
Cheers

Lethe6 said:
I use HDMI (without audio so I can't confirm it works), it's overclocked to 1.5GHz and I'm playing 720p mkv scene releases in MX Player without issues. Can't say about Direct Wifi, I don't use that. All on Team EOS's latest 4.2.1 (haven't made the jump to 4.2.2 yet).
Click to expand...
Click to collapse
Thats exactly what im looking for. I have had little success playing 720p mkv on my device with no lag. I upgraded my TF101 last night to cyanogenmod 10 v6 and it worked great for a little while, even playing videos well with little to no lag. I played with it last night for a couple of hours and installed many apps and settings. I powered it down before i went to bed and now it will not get passed the unlock screen. Its completely unresponsive at the lock screen. Any Ideas? Do i need to flash it to another ROM?

BlameXCanada said:
Thats exactly what im looking for. I have had little success playing 720p mkv on my device with no lag. I upgraded my TF101 last night to cyanogenmod 10 v6 and it worked great for a little while, even playing videos well with little to no lag. I played with it last night for a couple of hours and installed many apps and settings. I powered it down before i went to bed and now it will not get passed the unlock screen. Its completely unresponsive at the lock screen. Any Ideas? Do i need to flash it to another ROM?
Click to expand...
Click to collapse
Why would you install something as old as RaymanFX's CM10 v0.6?
Running that, I would recommend upgrading to something newer anyway. There has been updates to that CM10-ROM if you prefer something similar (see the nightly builds), and there has been CM10.1 builds which are equally stable and functional.
My CM10.1 is pretty good and does 720p just fine at 1.4GHz
Sent from my Transformer using Tapatalk HD

josteink said:
Why would you install something as old as RaymanFX's CM10 v0.6?
Running that, I would recommend upgrading to something newer anyway. There has been updates to that CM10-ROM if you prefer something similar (see the nightly builds), and there has been CM10.1 builds which are equally stable and functional.
My CM10.1 is pretty good and does 720p just fine at 1.4GHz
Sent from my Transformer using Tapatalk HD
Click to expand...
Click to collapse
After browsing the web last night for a while, as i am unfamiliar with android customization, i found a few instruction outlines that pointed me to repositories with builds. That was the newest build i could find on those repositories. I realize now that it is old and have learned a lot about the mods.
I will download the one you are suggesting and seeing how that goes. I appreciate your response!
Glad to hear that, that is the one thing that has not pleased me so far with my transformer. I really want to play 720p rips of movies/shows.

[Q] HDMI only works with stock ROM

This is the weirdest thing. HDMI works perfectly with my Razr HD, when I use the stock, rooted Moto ROM from VZW. Phone is unlocked and rooted, but otherwise stock and it will work just fine, as does my GF's totally stock Razr HD.
So I know that from a hardware perspective, the TV, cable, and both phones work as they should.
The issue is that as soon as I install a ROM, HDMI stops working on my phone. Even with ROMs where other people with the same ROM say that it works fine for them.
CM10.1 (Dhacker or Skrilax)
SlimBean
LiquidSmooth
PacMan
All of those report that HDMI is now working, but I cannot get ANY of them to work. As soon as I Nandroid back to the stock Moto ROM, it works.
I am running TWRP 2.5.0 and I do multiple full factory wipes, dalvic, cache before installing the new ROM. I fix permissions, the whole nine yards. Everything else installs and works fine(other than the noted bugs), but HDMI simply will not work on this phone unless I am on the stock ROM. I ask people in the LiquidSmooth thread to test and verify that it is actually working for them, and it is.
So what could be going on here? How can the phone work with stock but not with the latest versions of these other ROMs? And with my GF's stock phone as a control factor, I know that the cable and TV are fine.
Any ideas?

Nothin? I am the only one with HDMI that doesn't work under any ROM but stock? hehe

Me too
SquireSCA said:
Nothin? I am the only one with HDMI that doesn't work under any ROM but stock? hehe
Click to expand...
Click to collapse
Not the only one, I have the same problem, i actually dont care is BT or wifi work, I just want to be able to use the hdmi out

I will try to compile a ROM with working HDMI.
What ROM are you looking for .. For this to work?
Sent from my XT926 using Tapatalk now Free

I was running both Liquidsmooth for Android 4.2.2 and currently Eclipse for Android 4.2.2, and I am able to get HDMI working on both ROMs, on a XT926 Maxx HD.

Would you like a cm 10.1 ROM with HDMI?
Sent from my XT926 using Tapatalk now Free

Cyanogenmod 10.2 image available with Amplifier support

Hello,
Here is a build of CM10.2 from repo sync on 11/01/2013 for TAS5713 (Amplifier) outputs:
Please go easy on the downloads or mirror these files if desired. They are on my private server so bandwidth is limited.
TAS5713 (Audio Amplifier):
Download: https://www.androidfilehost.com/?fid=95784891001602458 (168MB)
MD5SUM: 3d817ba4eb918ecaae799c3959d8e9da *cm-10.2-20131101-UNOFFICIAL-steelhead_TAS5713.zip
SPDIF/HDMI: Use stock CM 10.2 nightly build.
Recovery: https://www.androidfilehost.com/?fid=95784891001602450
MD5SUM: e003bea5a89bac797313029b4f0a5206 *cm-10.2-recovery.img
To install:
Boot into recovery mode:
Code:
fastboot boot cm-10.2-recovery.img
When Q has reached recovery mode:
1. choose "install zip"
2. choose "install zip from sideload"
From PC:
Code:
adb sideload cm-10.2-20130910-UNOFFICIAL-steelhead.zip
It is a good idea to wipe data and cache. If coming from my previous cm-10.1 image, it may be possible to avoid wiping data/cache.
Sideload gapps if desired:
gapps-jb-20130813-signed.zip http://goo.im/gapps/gapps-jb-20130813-signed.zip md5sum:
1f51b5cc6370c1f45dc951109b6ce6ed
From within recovery, "install zip from sideload" and:
Code:
adb sideload gapps-jb-20130813-signed.zip
If cm10.2 gets stuck in a boot loop, then you probably forgot to wipe. Reboot the Q back into fastboot as follows:
Unplug power for Nexus Q and wait about 10 seconds.
Plug Q back in.
When the LED lights up on the top of the Q, cover it with your hand until the LED ring turns red. This has to be done in less than one second. If you miss it, try again.
As soon as the ring is RED, remove your hand, and the Q should be in fastboot mode.
Now, you can "fastboot -w" to wipe, or "fastboot boot recovery.img" to boot into recovery and wipe using the menu.
Please let me know how these work for you. I'm using these TAS5713 and CM 10.2 seems to be working mostly fine. The only probelm I found so far is that Chrome Browser in Google Play Store says it's not compatible with this device for some reason. Pulling the .apk off a phone and "adb install" to Nexus Q seems to work fine.

Hi,
Just a quick one, there doesn't seem to be a stock nightly build of cm 10.2. Any chance to see a build with optical out support?
Thank you.
Sent from my Nexus 7 using Tapatalk 4

Working very well here, no issues so far. I'm so glad, that there's still some activity in Q's development.
Thank you!
Sent from my Galaxy Nexus using Tapatalk 4

I'm dying to try this out, but I couldn't get CM installed... I can't seem to use the keyboard to input text, so I can't even get it to connect to my router. Mouse works fine, keyboard ( tried two different keyboards) don't seem to work.. some keys work, like home or print screen or something like that, but none of the actual letter or number keys do anything. I get a message that pops up really quick saying that the AOSP keyboard has stopped functioning. again, mouse works fine... both mouse and keyboard work fine with the Quantum Singularity build.. any ideas?
I would just assume that it was something wrong with this particular nightly of CM, but others seem to have got it working?
EDIT: I should specify I am having problems with the TAS5713 build you posted above.
-J

Hello,
I have not noticed the issue with the keyboard. That being said, I am primarily using a Logitech keyboard that came with the Logitech Revue (Google TV) device. It is a decent wireless keyboard also including a trackpad. I have also been using an Apple BT keyboard and it also works fine. I also tried a USB to PS/2 adapter to connect a keyboard and mouse and it also worked.
I have a new CM10.2 build with the latest 4.3 patches which seems to be working well. I will try to post it soon.
One thing I struggled with (again) was that after updating and reinstalling gapps, the sound did not come out, at least no sound except the "alarm" sounds. I had seen this before with CM10.1, and using one of the volume control widgets available in the Play Store seemed to fix the problem. Not so this time, I had to fastboot -w flashall to fix it. Even wiping from recovery didn't do the trick.
-Howard

I have a stock q ..how can i flash this image i don't have recovery or anything like that installed.

Does this allow HDMI audio and analogue output at the same time?

THE_KINGDOM said:
Does this allow HDMI audio and analogue output at the same time?
Click to expand...
Click to collapse
anybody?
Sent from my Nexus Q using Tapatalk 2

THE_KINGDOM said:
anybody?
Sent from my Nexus Q using Tapatalk 2
Click to expand...
Click to collapse
If you use this build, audio signal transfers only through the banana plugs. Since we cannot toggle between this and hdmi audio output, one must install stock cyanogenmod in order to use the latter.
Sent from my Nexus S using Tapatalk 4

ottoemezzo said:
If you use this build, audio signal transfers only through the banana plugs. Since we cannot toggle between this and hdmi audio output, one must install stock cyanogenmod in order to use the latter.
Sent from my Nexus S using Tapatalk 4
Click to expand...
Click to collapse
i really hope somebody finds a way to merge these together soon so that HDMI/TAS5713 can be used at the same time
Sent from my Nexus Q using Tapatalk 2

THE_KINGDOM said:
i really hope somebody finds a way to merge these together soon so that HDMI/TAS5713 can be used at the same time
Sent from my Nexus Q using Tapatalk 2
Click to expand...
Click to collapse
That'd be a cool feature. Another (and less comfortable) possibility would be to have a dual boot enabled kernel. First rom would be the HDMI build, the second one the other. I'm afraid though it won't happen, since - apart from cyanogen's - we don't really have any custom kernels.
Sent from my Nexus S using Tapatalk

I know a little OT but has anybody managed to mount a USB storage device since putting CM10.2 on? I haven't managed to since installing CM10.2
Sent from my Nexus Q using Tapatalk 2

THE_KINGDOM said:
I know a little OT but has anybody managed to mount a USB storage device since putting CM10.2 on? I haven't managed to since installing CM10.2
Sent from my Nexus Q using Tapatalk 2
Click to expand...
Click to collapse
No success on my side either.
Sent from my Nexus S using Tapatalk

Does this build, or any build of CM for that matter support the LED light ring? I personally think that feature was a great and would love to still be able to use it.
ottoemezzo said:
No success on my side either.
Sent from my Nexus S using Tapatalk
Click to expand...
Click to collapse

viffer_man said:
Does this build, or any build of CM for that matter support the LED light ring? I personally think that feature was a great and would love to still be able to use it.
Click to expand...
Click to collapse
agree this feature should be utilized.

Just thought folks should know that the new 10.2 nightlies allow sound to come out via HDMI and SPDIF (digital out) simultaneously. I don't know about the amplifier since I don't use that output, but I suspect it does that too.

mahler47 said:
Just thought folks should know that the new 10.2 nightlies allow sound to come out via HDMI and SPDIF (digital out) simultaneously. I don't know about the amplifier since I don't use that output, but I suspect it does that too.
Click to expand...
Click to collapse
Sounds good. Can somebody can confirm that the Amplifier works with the latest nightlies?
If yes, we could always have the latest CM on our Q :good:
At the moment I`m using the Image from this thread with very well AMP support.
But my overall Performance is not the best. Little bit laggy. (screenshot)
You have the same Performance ?!
Edit:
http://i.imagebanana.com/img/038unthe/Screenshot_20131027192313.png

I uploaded a new cm 10.2 build from November 1, 2013 today to the original post. As far as I know, the cm 10.2 nightlies still do not support the audio amplifier.

hharte said:
I uploaded a new cm 10.2 build from November 1, 2013 today to the original post. As far as I know, the cm 10.2 nightlies still do not support the audio amplifier.
Click to expand...
Click to collapse
Excellent, I cannot express how grateful I am.
Sent from my Nexus S using Tapatalk

hharte said:
I uploaded a new cm 10.2 build from November 1, 2013 today to the original post. As far as I know, the cm 10.2 nightlies still do not support the audio amplifier.
Click to expand...
Click to collapse
Thank you hharte :good:
Latest build runs great !

Custom Rom vs Stock Rom

Just got a k1 tablet with stylus (B01) battery and noticed lag and WiFi playing up. If I were to try custom rom, are there features that will stop working?
1. Does HDMI out, mirror and console mode work?
2. Does the stylus still work?
3. To tegra games work?

It depends the ROM for Nvidia games, you need stock based custom ROM.

Custom rom meaning CM/Lineage

Custom ROM = no HDMI audio!

Niii4 said:
Custom ROM = no HDMI audio!
Click to expand...
Click to collapse
No, that's not the case anymore. The great Steel01 got it working in CM/Lineage!

edisso10018 said:
No, that's not the case anymore. The great Steel01 got it working in CM/Lineage!
Click to expand...
Click to collapse
Does it act like mirror mode or console mode? I.e. screen off or on