Just got a k1 tablet with stylus (B01) battery and noticed lag and WiFi playing up. If I were to try custom rom, are there features that will stop working?
1. Does HDMI out, mirror and console mode work?
2. Does the stylus still work?
3. To tegra games work?
It depends the ROM for Nvidia games, you need stock based custom ROM.
Custom rom meaning CM/Lineage
Custom ROM = no HDMI audio!
Niii4 said:
Custom ROM = no HDMI audio!
Click to expand...
Click to collapse
No, that's not the case anymore. The great Steel01 got it working in CM/Lineage!
edisso10018 said:
No, that's not the case anymore. The great Steel01 got it working in CM/Lineage!
Click to expand...
Click to collapse
Does it act like mirror mode or console mode? I.e. screen off or on
Related
http://www.ebay.com/itm/180981126424?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
http://www.ebay.com/itm/350609304281?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
Anyone used a non-TW rom with these MHL cables? Do they still work well?
Flowah said:
http://www.ebay.com/itm/180981126424?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
http://www.ebay.com/itm/350609304281?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
Anyone used a non-TW rom with these MHL cables? Do they still work well?
Click to expand...
Click to collapse
On Sgh i777, tried 3 non TW based ROMS and they doesn't work. But, adding a few cmds to the build.prop file, you will get full video and audio functionality (still can't find a way to mirror the whole UI)
Regards
FranAmestoy said:
On Sgh i777, tried 3 non TW based ROMS and they doesn't work. But, adding a few cmds to the build.prop file, you will get full video and audio functionality (still can't find a way to mirror the whole UI)
Regards
Click to expand...
Click to collapse
what are those line? if you don't mind
Hello everybody,
Recently I bought an HDMI cable to connect my TF101 to my TV, but the image is blurred, blinks several times and get a horrible sound quality. Is there any solution?
And what is the best ROM to use the HDMI output?
Thanks, I am waiting for the answers.
Sorry for my bad English.
AshAtWork said:
Hello everybody,
Recently I bought an HDMI cable to connect my TF101 to my TV, but the image is blurred, blinks several times and get a horrible sound quality. Is there any solution?
And what is the best ROM to use the HDMI output?
Thanks, I am waiting for the answers.
Sorry for my bad English.
Click to expand...
Click to collapse
I havnt used hdmi very much but i found the jellybean roms has a few issues(relating to lag) id stick with a stock based ics rom like revolver, yet your issue sounds more like port/ cable damage than software issues
I'm using 4.2.2 (see my sig) and HDMI works fine on a monitor. I haven't tried a TV nor audio, but it works fine for video as second screen.
Lethe6 said:
I'm using 4.2.2 (see my sig) and HDMI works fine on a monitor. I haven't tried a TV nor audio, but it works fine for video as second screen.
Click to expand...
Click to collapse
I flash the latest TWRP, the latest TeamEOS 4.2.2 build, the latest 4.2.2 gapps, the latest KatKernel for 4.2.2 and using the latest KatApp but still the same.
AshAtWork said:
I flash the latest TWRP, the latest TeamEOS 4.2.2 build, the latest 4.2.2 gapps, the latest KatKernel for 4.2.2 and using the latest KatApp but still the same.
Click to expand...
Click to collapse
Haven't tried with 4.2.2, but HDMI works perfectly with EOS3 #81 and KATKernel #69
Sound like a stuck record constantly mentioning this ROM but its the one I have 0 problems with
Plus you should try a different HDMI cable
I have not had any issues with the stock ROM using HDMI. It should just work plain & simple unless your TV is not compatible. Not all TV's will work.
The title says it all.
I'm new to this whole rooting and custom rom stuff but i loved the changes a custom rom did to my smartphone and i thought i'd also do it on my Asus Transformer Pad.
I attached 2 screenshots to see all the info of my device, and tell me which roms are compatible and which you recommend.
Every tip is appreciated!
Alkis.
so?
anyone?
alkis91 said:
anyone?
Click to expand...
Click to collapse
Do you need 3G working after you flash a custom ROM?
cmendonc2 said:
Do you need 3G working after you flash a custom ROM?
Click to expand...
Click to collapse
alkis91 said:
The title says it all.
I'm new to this whole rooting and custom rom stuff but i loved the changes a custom rom did to my smartphone and i thought i'd also do it on my Asus Transformer Pad.
I attached 2 screenshots to see all the info of my device, and tell me which roms are compatible and which you recommend.
Every tip is appreciated!
Alkis.
Click to expand...
Click to collapse
Which custom ROM is a matter of personal opinion, Personally I use PAC-ROM 4.4.2 though I have used OmniRom and Cromi-X (not Crombi-KK). What cmendonc means is that there are almost no TF300TG sources out there besides what asus provides. This is one of the trade-offs that you have to make (ie do I want 3G or a better ROM overall?). Most of the ROMs in the Developer section are pretty stable. I would recommend Cromi-x, as you mostly have everything you need and it is super stable. Good luck
cmendonc2 said:
Do you need 3G working after you flash a custom ROM?
Click to expand...
Click to collapse
No doesn't really matter to me.. what difference does the 3G make after all?
Drahric said:
Which custom ROM is a matter of personal opinion, Personally I use PAC-ROM 4.4.2 though I have used OmniRom and Cromi-X (not Crombi-KK). What cmendonc means is that there are almost no TF300TG sources out there besides what asus provides. This is one of the trade-offs that you have to make (ie do I want 3G or a better ROM overall?). Most of the ROMs in the Developer section are pretty stable. I would recommend Cromi-x, as you mostly have everything you need and it is super stable. Good luck
Click to expand...
Click to collapse
I actually prefer a better rom overall than the 3G capabilities, but the reason i ask for the best rom is not about the appearance or anything like this, its just that i've read a lot of people complaining after flashing some TF300 roms, about losing their Wi-Fi, etc.
And i most certainly need my wifi.
So error-wise ( ) , which is the best rom
alkis91 said:
I actually prefer a better rom overall than the 3G capabilities, but the reason i ask for the best rom is not about the appearance or anything like this, its just that i've read a lot of people complaining after flashing some TF300 roms, about losing their Wi-Fi, etc.
And i most certainly need my wifi.
So error-wise ( ) , which is the best rom
Click to expand...
Click to collapse
I'm running KK CROMi right now and it seems pretty smooth compared to a few other I tried over the past week.
Ok that sounds good
Do you have a TF300tg , or a TF300t? and if you have the TG, what are the complications, if any? if it's just the 3G, i don't really care.
Thanks
cmendonc2 said:
I'm running KK CROMi right now and it seems pretty smooth compared to a few other I tried over the past week.
Click to expand...
Click to collapse
alkis91 said:
Ok that sounds good
Do you have a TF300tg , or a TF300t? and if you have the TG, what are the complications, if any? if it's just the 3G, i don't really care.
Thanks
Click to expand...
Click to collapse
Yeah the 3G will most likely be knocked out. I have a tf300t. The rest of the ROM should function normally.
?
alkis91 said:
The title says it all.
I'm new to this whole rooting and custom rom stuff but i loved the changes a custom rom did to my smartphone and i thought i'd also do it on my Asus Transformer Pad.
I attached 2 screenshots to see all the info of my device, and tell me which roms are compatible and which you recommend.
Every tip is appreciated!
Alkis.
Click to expand...
Click to collapse
How about this one???
http://forum.xda-developers.com/showthread.php?t=2290952
How about this one???
How about this one???
http://forum.xda-developers.com/showthread.php?t=2290952
AOSP 4.4.2 for Nvidia Shield Tablet LTE US
I'm not even kind of responsible for what happens to your device.
System information
Android Open Source Project build
Kernel information
Atheros wireless chipset support for external wireless adapter
Source
> ROM
> Kernel
Installation instructions
Boot into recovery
Make a backup
Install zip
Wipe data/cache
Reboot
Select Yes - disable recovery flash
If the device was running 5.0.x and is stuck in a boot loop after installing the zip, flash the 4.4.2 factory image then repeat the installation process
XDA:DevDB Information
AOSP 4.4.2 for Nvidia Shield Tablet LTE US, ROM for the Nvidia Shield Tablet
Contributors
t1mz0r
ROM OS Version: 4.4.x KitKat
Version Information
Status: Beta
Created 2015-01-17
Last Updated 2015-01-25
Reserved
Reserved
I am STOKED! Nice to see some LTE love! (What's so hard about making it compatible, I wonder?)
I have a couple of questions...
-Is it a stable beta?
-Is the touch screen sensitivity fixed?
-Is it compatible with the shield apps? (Dabbler, Shield Hub, Etc.)
Basically, I want to go back to Kitkat without all the bugs of the stock KitKat firmware.
Edit: Oh, wow. I actually got to be the first post. This post will be the first one many will see for a long time. Millions will bow before me, as they bask in the glory of my eloquence! Bow, my loyal subjects! Bow!
notyu1459 said:
-Is it a stable beta?
Click to expand...
Click to collapse
Yes.
-Is the touch screen sensitivity fixed?
Click to expand...
Click to collapse
The test device running this build doesn't have this problem.
-Is it compatible with the shield apps? (Dabbler, Shield Hub, Etc.)
Click to expand...
Click to collapse
I haven't tested this.
Wait....is this meant to be installed over a particular stock firmware, or is it a standalone zip? Your directions don't include any wiping before flashing.
notyu1459 said:
Wait....is this meant to be installed over a particular stock firmware, or is it a standalone zip? Your directions don't include any wiping before flashing.
Click to expand...
Click to collapse
I assume he just left out this part. A new ROM flashing over a different one without wiping could lead to problems, especially if you jump from 5.0.1 to 4.4.2.
I'm also glad that someone starts with development on the LTE variant, as I am not happy with the overall performance anymore.
notyu1459 said:
Wait....is this meant to be installed over a particular stock firmware, or is it a standalone zip? Your directions don't include any wiping before flashing.
Click to expand...
Click to collapse
You should pretty much always perform a full wipe before flashing another ROM but I didn't have to on the test device.
t1mz0r said:
You should pretty much always perform a full wipe before flashing another ROM but I didn't have to on the test device.
Click to expand...
Click to collapse
Yeah, I know. I guess I was just thrown off by the "Wipe data/cache" and thought it looked like some kind of weird dirty flash.
I should stop posting so late at night.
This is cool, though might I ask why you chose to develop a kitkat kerel?
I will PM you later today with a proposition, I really hope we can bring some Lollipop lovin' to the LTE device! It's the variant I own too, so it's my main development device.
berryman13 said:
This is cool, though might I ask why you chose to develop a kitkat kernel?
Click to expand...
Click to collapse
It's just a starting point. There was no support for LTE US, a lot of broken functionality and suboptimal performance in lollipop and a lot of regression requests.
I forgot to ask....it looks as though it was built on the source of Nvidia's ROM. How's the HDMI out? Can you connect The Shield Controllers to it with this ROM? Does Direct Stylus respond the same way? What's 2+2? Am I asking too many questions?
notyu1459 said:
I forgot to ask....it looks as though it was built on the source of Nvidia's ROM. How's the HDMI out? Can you connect The Shield Controllers to it with this ROM? Does Direct Stylus respond the same way? What's 2+2? Am I asking too many questions?
Click to expand...
Click to collapse
Yes you are. How about you take a NAND backup, flash it and see for yourself?
My guess is no not unless the porting work has been done, but unless stated otherwise the nvidia features probably don't work
---------- Post added at 04:41 AM ---------- Previous post was at 04:40 AM ----------
t1mz0r said:
It's just a starting point. There was no support for LTE US, a lot of broken functionality and suboptimal performance in lollipop and a lot of regression requests.
Click to expand...
Click to collapse
PM'ed you a proposal. I understand, it's definitely a great starting point.
Im switching to android and ill be geting an old Z3, im thinking its best if i use custom ROMs as it doesnt get updated anymore, i looked at lineage os but which ROM would you recommend?
any roms that look like Windows 10 Mobile?
Carbon rom / omni rom
Danny___Taylor said:
Im switching to android and ill be geting an old Z3, im thinking its best if i use custom ROMs as it doesnt get updated anymore, i looked at lineage os but which ROM would you recommend?
any roms that look like Windows 10 Mobile?
Click to expand...
Click to collapse
I can fully recommend carbon rom with weekly updates. Also omnirom wich is similar.
Rock solid performance with carbon, very few bugs. Stable!
Stefan.xda said:
I can fully recommend carbon rom with weekly updates. Also omnirom wich is similar.
Rock solid performance with carbon, very few bugs. Stable!
Click to expand...
Click to collapse
support mhl or screen mirroring
Zero-21XX said:
support mhl or screen mirroring
Click to expand...
Click to collapse
Nope those are broken.
wouldn't mind trying out carbon Rom my self but can't get it too flash in twrp
I recomning Omni it lives on the better edge even some parts are a bit out of date, but in return it have better drivers and better kernel.
does any of the stock roms work anymore as ive been trying to boot a few but never boot up just stops on the boot animation
Bootloader
i checked by dialing that weird number in the phone app and it says i have a locked bootloader, can i still root it?
Danny___Taylor said:
i checked by dialing that weird number in the phone app and it says i have a locked bootloader, can i still root it?
Click to expand...
Click to collapse
Yes you can still root your phone without unlocking bootloader.