Hello,
Here is a build of CM10.2 from repo sync on 11/01/2013 for TAS5713 (Amplifier) outputs:
Please go easy on the downloads or mirror these files if desired. They are on my private server so bandwidth is limited.
TAS5713 (Audio Amplifier):
Download: https://www.androidfilehost.com/?fid=95784891001602458 (168MB)
MD5SUM: 3d817ba4eb918ecaae799c3959d8e9da *cm-10.2-20131101-UNOFFICIAL-steelhead_TAS5713.zip
SPDIF/HDMI: Use stock CM 10.2 nightly build.
Recovery: https://www.androidfilehost.com/?fid=95784891001602450
MD5SUM: e003bea5a89bac797313029b4f0a5206 *cm-10.2-recovery.img
To install:
Boot into recovery mode:
Code:
fastboot boot cm-10.2-recovery.img
When Q has reached recovery mode:
1. choose "install zip"
2. choose "install zip from sideload"
From PC:
Code:
adb sideload cm-10.2-20130910-UNOFFICIAL-steelhead.zip
It is a good idea to wipe data and cache. If coming from my previous cm-10.1 image, it may be possible to avoid wiping data/cache.
Sideload gapps if desired:
gapps-jb-20130813-signed.zip http://goo.im/gapps/gapps-jb-20130813-signed.zip md5sum:
1f51b5cc6370c1f45dc951109b6ce6ed
From within recovery, "install zip from sideload" and:
Code:
adb sideload gapps-jb-20130813-signed.zip
If cm10.2 gets stuck in a boot loop, then you probably forgot to wipe. Reboot the Q back into fastboot as follows:
Unplug power for Nexus Q and wait about 10 seconds.
Plug Q back in.
When the LED lights up on the top of the Q, cover it with your hand until the LED ring turns red. This has to be done in less than one second. If you miss it, try again.
As soon as the ring is RED, remove your hand, and the Q should be in fastboot mode.
Now, you can "fastboot -w" to wipe, or "fastboot boot recovery.img" to boot into recovery and wipe using the menu.
Please let me know how these work for you. I'm using these TAS5713 and CM 10.2 seems to be working mostly fine. The only probelm I found so far is that Chrome Browser in Google Play Store says it's not compatible with this device for some reason. Pulling the .apk off a phone and "adb install" to Nexus Q seems to work fine.
Hi,
Just a quick one, there doesn't seem to be a stock nightly build of cm 10.2. Any chance to see a build with optical out support?
Thank you.
Sent from my Nexus 7 using Tapatalk 4
Working very well here, no issues so far. I'm so glad, that there's still some activity in Q's development.
Thank you!
Sent from my Galaxy Nexus using Tapatalk 4
I'm dying to try this out, but I couldn't get CM installed... I can't seem to use the keyboard to input text, so I can't even get it to connect to my router. Mouse works fine, keyboard ( tried two different keyboards) don't seem to work.. some keys work, like home or print screen or something like that, but none of the actual letter or number keys do anything. I get a message that pops up really quick saying that the AOSP keyboard has stopped functioning. again, mouse works fine... both mouse and keyboard work fine with the Quantum Singularity build.. any ideas?
I would just assume that it was something wrong with this particular nightly of CM, but others seem to have got it working?
EDIT: I should specify I am having problems with the TAS5713 build you posted above.
-J
Hello,
I have not noticed the issue with the keyboard. That being said, I am primarily using a Logitech keyboard that came with the Logitech Revue (Google TV) device. It is a decent wireless keyboard also including a trackpad. I have also been using an Apple BT keyboard and it also works fine. I also tried a USB to PS/2 adapter to connect a keyboard and mouse and it also worked.
I have a new CM10.2 build with the latest 4.3 patches which seems to be working well. I will try to post it soon.
One thing I struggled with (again) was that after updating and reinstalling gapps, the sound did not come out, at least no sound except the "alarm" sounds. I had seen this before with CM10.1, and using one of the volume control widgets available in the Play Store seemed to fix the problem. Not so this time, I had to fastboot -w flashall to fix it. Even wiping from recovery didn't do the trick.
-Howard
I have a stock q ..how can i flash this image i don't have recovery or anything like that installed.
Does this allow HDMI audio and analogue output at the same time?
THE_KINGDOM said:
Does this allow HDMI audio and analogue output at the same time?
Click to expand...
Click to collapse
anybody?
Sent from my Nexus Q using Tapatalk 2
THE_KINGDOM said:
anybody?
Sent from my Nexus Q using Tapatalk 2
Click to expand...
Click to collapse
If you use this build, audio signal transfers only through the banana plugs. Since we cannot toggle between this and hdmi audio output, one must install stock cyanogenmod in order to use the latter.
Sent from my Nexus S using Tapatalk 4
ottoemezzo said:
If you use this build, audio signal transfers only through the banana plugs. Since we cannot toggle between this and hdmi audio output, one must install stock cyanogenmod in order to use the latter.
Sent from my Nexus S using Tapatalk 4
Click to expand...
Click to collapse
i really hope somebody finds a way to merge these together soon so that HDMI/TAS5713 can be used at the same time
Sent from my Nexus Q using Tapatalk 2
THE_KINGDOM said:
i really hope somebody finds a way to merge these together soon so that HDMI/TAS5713 can be used at the same time
Sent from my Nexus Q using Tapatalk 2
Click to expand...
Click to collapse
That'd be a cool feature. Another (and less comfortable) possibility would be to have a dual boot enabled kernel. First rom would be the HDMI build, the second one the other. I'm afraid though it won't happen, since - apart from cyanogen's - we don't really have any custom kernels.
Sent from my Nexus S using Tapatalk
I know a little OT but has anybody managed to mount a USB storage device since putting CM10.2 on? I haven't managed to since installing CM10.2
Sent from my Nexus Q using Tapatalk 2
THE_KINGDOM said:
I know a little OT but has anybody managed to mount a USB storage device since putting CM10.2 on? I haven't managed to since installing CM10.2
Sent from my Nexus Q using Tapatalk 2
Click to expand...
Click to collapse
No success on my side either.
Sent from my Nexus S using Tapatalk
Does this build, or any build of CM for that matter support the LED light ring? I personally think that feature was a great and would love to still be able to use it.
ottoemezzo said:
No success on my side either.
Sent from my Nexus S using Tapatalk
Click to expand...
Click to collapse
viffer_man said:
Does this build, or any build of CM for that matter support the LED light ring? I personally think that feature was a great and would love to still be able to use it.
Click to expand...
Click to collapse
agree this feature should be utilized.
Just thought folks should know that the new 10.2 nightlies allow sound to come out via HDMI and SPDIF (digital out) simultaneously. I don't know about the amplifier since I don't use that output, but I suspect it does that too.
mahler47 said:
Just thought folks should know that the new 10.2 nightlies allow sound to come out via HDMI and SPDIF (digital out) simultaneously. I don't know about the amplifier since I don't use that output, but I suspect it does that too.
Click to expand...
Click to collapse
Sounds good. Can somebody can confirm that the Amplifier works with the latest nightlies?
If yes, we could always have the latest CM on our Q :good:
At the moment I`m using the Image from this thread with very well AMP support.
But my overall Performance is not the best. Little bit laggy. (screenshot)
You have the same Performance ?!
Edit:
http://i.imagebanana.com/img/038unthe/Screenshot_20131027192313.png
I uploaded a new cm 10.2 build from November 1, 2013 today to the original post. As far as I know, the cm 10.2 nightlies still do not support the audio amplifier.
hharte said:
I uploaded a new cm 10.2 build from November 1, 2013 today to the original post. As far as I know, the cm 10.2 nightlies still do not support the audio amplifier.
Click to expand...
Click to collapse
Excellent, I cannot express how grateful I am.
Sent from my Nexus S using Tapatalk
hharte said:
I uploaded a new cm 10.2 build from November 1, 2013 today to the original post. As far as I know, the cm 10.2 nightlies still do not support the audio amplifier.
Click to expand...
Click to collapse
Thank you hharte :good:
Latest build runs great !
Related
Alpha release of CM9 for the Triumph:
Please see this thread:
http://androidforums.com/triumph-al...ha-triumph-cm9-v0-5-released.html#post3899306
Cm9 alpha is already awesome. I flashed this and its great!
Sent from my WX435 using Tapatalk
Just got done flashing the newest release of CM9 ICS Alpha 0.5.2 & all went well this time no overheating issue's & most all of the apps i installed worked just fine, there was a little bit of lag even when i had it overclocked to 1.5gz, all in all a damn good start. Great work guys keep it up
jaaydogg said:
Just got done flashing the newest release of CM9 ICS Alpha 0.5.2 & all went well this time no overheating issue's & most all of the apps i installed worked just fine, there was a little bit of lag even when i had it overclocked to 1.5gz, all in all a damn good start. Great work guys keep it up
Click to expand...
Click to collapse
Just so you know OC doesn't work.
Hey guys I heard that wifi may or may not run your clock at full whilst being on in this build. I also heard there's an easy fix involving a root file explorer. no this isn't a joke
Sent from my DROID3 using xda premium
tacosrdelicioso said:
Hey guys I heard that wifi may or may not run your clock at full whilst being on in this build. I also heard there's an easy fix involving a root file explorer. no this isn't a joke
Sent from my DROID3 using xda premium
Click to expand...
Click to collapse
It's in the newest build I believe. Or rather the file is removed.
v0.6.3
Changelog:
Alpha 0.6.3
enabled data usage accounting
removed btwcoexlanc file startup so wifi usage will not cause cpu to run at max
fixed haptic keys
enabled hdpi icons
Added facebook contact support
Get camera working and your the man!!!
Sent from my Transformer Prime TF201 using xda premium
In call volume is bad for me, I can barely hear someone talk. Anyone else with this issue?
Sent from my WX435 using Tapatalk
I use this as my daily now. In-call volume works fine for me. Did you try rebooting your phone?
Edit: That's both in-call volume with a Motorola BT headset as well as in-call volume as normal when holding the phone up to your ear that works fine for me, btw.
Looking very interesting! Can't wait for it to be more refined. Keep up the great work developers!!
yep, I rebooted. Cleared cache and delvik. Factory reset as well.
Sent from my Triumph using Tapatalk
happy to see there are more updates coming on. Hope soon the camera will be fix
0.6.14.0
Changelog:
Alpha 0.6.14.1
-Enabled btwlancoex
Alpha 0.6.14.0
-Updated kernel to 2.6.32.59 (iOC v1.2)
-Updated to Android v 4.0.4_r1.2 (IMM76I)
-Reworked init.d call--hopefully will work better
-Added cm wallpapers.
-Notable CM upstream changes:
-CM9 TMobile Theme Chooser Engine. See post #4 in the thread linked in OP for links for themes. Let me know if you find more good links and I'll add them to the list.
-Ability to customize and add new shortcuts to the Ring lockscreen. System settings --> System --> Lock screen --> Lock screen shortcuts
-Now builds OpenVPN
Cameras not working!!!!
:
llorn said:
I use this as my daily now. In-call volume works fine for me. Did you try rebooting your phone?
Edit: That's both in-call volume with a Motorola BT headset as well as in-call volume as normal when holding the phone up to your ear that works fine for me, btw.[/QUOTE
I needed working cameras. The cameras is the best part on the phone. Thanks for the updates, but without working cameras its useless. Thanks again
Click to expand...
Click to collapse
Blue Tooth works perfect on CM7 2.3.7
llorn said:
I use this as my daily now. In-call volume works fine for me. Did you try rebooting your phone?
Edit: That's both in-call volume with a Motorola BT headset as well as in-call volume as normal when holding the phone up to your ear that works fine for me, btw.
Click to expand...
Click to collapse
Blue Tooth works perfect on CM7 2.3.7 everything works perfect The new Virgin Mobile EVO V 4G is out today, it's running ICS out the box!!!!!
Yes and ina month or so you could buy a i4s from virginmobile. I want CM with a camera &hdmi please!
Sent from my Rooted MOTWX435KT using Xda Premium
Flashed this booted up fine, but when I rebooted to get everything up the boot screen was almost white could barely see animation, also happened with AOSP liquid smooth, just wondering if I messed up somewhere, did all wipes necessary still did it after clean install
Sent from my ADR6350 using XDA
henslo said:
Flashed this booted up fine, but when I rebooted to get everything up the boot screen was almost white could barely see animation, also happened with AOSP liquid smooth, just wondering if I messed up somewhere, did all wipes necessary still did it after clean install
Sent from my ADR6350 using XDA
Click to expand...
Click to collapse
Yeah, it sounds like a bad flash. I'd recommend that you do the following:
1. Restore a working nandroid backup or flash the stock rom if you don't have a backup.
2. Boot up your phone all the way to make sure you phone starts ok.
3. Reboot into recovery.
4. Do a Factory Reset/Wipe Data. DO NOT wipe /system.
5. Flash the cm9 rom.
6. Flash GAPPS.
7. Reboot phone.
See if that works.
Thanks, ill try that :beer:
Sent from my ADR6350 using XDA
*DISCONTINUED*
CyanogenMod 10 PORT for Galaxy Note II
This is a port of CM10 originally made for galaxy SIII by Team Hacksung, this is NOT a daily driver (yet).
this port is still using stock kernel from latest release from samsung, but an alternative featured kernel is considered now.
Code:
[U][CENTER][B]What WORKS[/B][/U]
Microphone
3G
audio
h/w video acceleration
gps
wifi
bluetooth
phonecalls
sms
internal / external storage handling (at /storage/sdcard0 and sdcard1)
light in softbuttons, but seems not to auto wake up,
but is adjustable in advanced -> settings
games seems to work fine.[/CENTER]
Code:
[U][CENTER][B]Not working[/B][/U]
Camera
MTP connection to windows
[/CENTER]
DOWNLOADS
2012-10-08 v2 build here [MD5] - 5054a0c87244165757743fb4a3c0cc27
See this post for the MIC patch to make calls working . Thanks to imilka for the patch and fixing audio issue
download gapps from
here
Previous updates
2012-10-08 build here [MD5] - 0ccd094f093529a08c928d53848e24d3
2012-10-06 build here [MD5] - 3f0e5e46a2320abf03cd126ea9269bf6
Click to expand...
Click to collapse
Instructions
Firefox users: if you get the warning of adware or bloatware, IGNORE and press i want to continue, my files are pure zips for android,
and nothing to be executed on your pc
Install ROM through ClockWorkMod (CWM).
It will require you to WIPE / factory reset, if you are installing this for the first time on your GNII ,
since its completely different from a stock rom.
Click to expand...
Click to collapse
THANKS TO
Click to expand...
Click to collapse
Team Hacksung for the original compile
imilka for the MIC patch
since i uploaded this one, audio is now starting to work
I am hoping to update with a better edition very,very soon.
Screenshots
Sent from my HTC Ruby using xda app-developers app
skugpezz said:
Screenshots
Click to expand...
Click to collapse
i personally believe a stock AOSP CM10 without mod, is pretty much stock and pictures can be found all over xda.
its really not graphics changing here, its a CM10 release.
Uploading next update,
audio fixed, graphics bug gone, hardware video playback and youtube HD , tested and works.
what seems not working now
light in soft buttons.
Microphone (someone knows the /etc/sound/ tinyHAL config and a solution?)
camera (reboot's mobile)
Great work, will try it soon
you have a pm Dexter
Awesome!
It's a great on your doing, and I'm sure someone could help you with audio / you'll figure it out
Sent from my Desire HD using xda app-developers app
note,
if you got version 20121006 when downloading from link, please refresh Post #1 and get todays 20121008 edition.
I've read AOKP comes from CM, or is based off CM. so today, this is the closest thing we will have to AOKP? :>
thanks for the up :good:
Great thanks for your work
what gapps version i need pls?
i think the jb20120726
********EDIT***********
Have installed with the gaps jb20120726
looks and works fine for the first moment
Have this rom like the sgs3 a memory leak?
entwicklun said:
I've read AOKP comes from CM, or is based off CM. so today, this is the closest thing we will have to AOKP? :>
thanks for the up :good:
Click to expand...
Click to collapse
yes, its close, but it is not AOKP based. its based on the CM10 i9300 edition distributed on nightlies i9300.
hasbai said:
Great thanks for your work
what gapps version i need pls?
i think the jb20120726
Click to expand...
Click to collapse
yes, i used 0726 personally here. i believe it depends on usability , testing and compatibility.
my 64gb sandisk card is accepted without any problems (its formated with fat32)
and can restore my app backups with titanium bacup
only app2sd dont work
dont show the sdcard
entwicklun said:
I've read AOKP comes from CM, or is based off CM. so today, this is the closest thing we will have to AOKP? :>
thanks for the up :good:
Click to expand...
Click to collapse
I have an attempt at an aokp port but i don't have a note ii to test it. Lol.
Sent from my HTC Rezound using xda app-developers app
delete
awesomeness !
flashed "2012-10-08 v2" but
1) dialer/phone is not working at all, can't make calls, no audio via bluetooth either.
2) phone was getting VERY hot !
will keep a very close eye on this as it develops. !
hasbai said:
Have this rom like the sgs3 a memory leak?
Click to expand...
Click to collapse
any feedback re this ?
Cool!! The note 2 is gaining ground really really fast! Thanks.
Sent from my GT-N7100 using Tapatalk 2
ipguy said:
awesomeness !
flashed "2012-10-08 v2" but
1) dialer/phone is not working at all, can't make calls, no audio via bluetooth either.
2) phone was getting VERY hot !
will keep a very close eye on this as it develops. !
Click to expand...
Click to collapse
did you wipe, sounds like a serious error in memory of wiping, when /data is not clean.
edit: i just wiped and tested, and yes, audio with calls, even with BT seems to fail at some point, i just got noise in bt headset and on my mbile answering machine so not working well.
hasbai said:
Have this rom like the sgs3 a memory leak?
Click to expand...
Click to collapse
honestly do not know wheere the mem leak is, but as this is use proprietary drivers from GNII stock firmware, lets just hope it do not
and thats where CM team believe GSIII got one
Dexter_nlb said:
did you wipe, sounds like a serious error in memory of wiping, when /data is not clean.
edit: i just wiped and tested, and yes, audio with calls, even with BT seems to fail at some point, i just got noise in bt headset and on my mbile answering machine so not working well.
honestly do not know wheere the mem leak is, but as this is use proprietary drivers from GNII stock firmware, lets just hope it do not
and thats where CM team believe GSIII got one
Click to expand...
Click to collapse
Yup I did a full wipe
Hi Developers and Testers
Update: Upgraded to
[Flinny] Andromadus Test builds - CM10.1[10] Bluetooth working
[Flinny] Andromadus Test builds - CM10.1[9] Bluetooth issue - no change, patienece is needed
[Flinny] Andromadus Test builds - CM10.1[8] Bluetooth issue as below no change - unfortunately
[Flinny] Andromadus Test builds - CM10.1[7], still Bluetooth issue, acknowledged by developer Flinny as upstream i.e. google issue
However please check as below Samsung Galaxy S running with CM 10.1 no BT issue - Why?
[Flinny] Andromadus Test builds - CM10.1[6], unfortunately Bluetooth issue continues.
[Flinny] Andromadus Test builds - CM10.1[5], unfortunately same issue for Bluetooth.
Still connecting (pairing) but can not make call or receive call
Unfortunately I do not have enough posts so I can not add to the thread
[14-12-12][Flinny] Andromadus Test builds - CM10.1[4] (Development Section)
where this finding would belong, maybe somebody could paste it there http://forum.xda-developers.com/showthread.php?t=2031694.
I am testing the [14-12-12][Flinny] Andromadus Test builds - CM10.1[4] and it works great with my Desire S. Thanks Flinny for the sensational work.
However as with other testers I can not operate my in car Bluetooth speaker system, it connects (pairs) however I can not make or receive calls.
Following the thread it was mentioned that Google changed the Bluetooth code, therefore it would not work, especially with older build in Bluetooth car speaker systems
Today I installed on my second android device Samsung Galaxy S9000 CM 10.1 ROM (cm-10.1-20121221-NIGHTLY-galaxysmtd.zip) and tested bluetooth. I could pair, connect and make and receive calls. So I do not believe it is the Google code as such that is the issue for the BT not working with inbuilt car speaker system.
Could you experts please comment.
thanks,
Kla
Have a great productive 2013
What recovery are you using to flash it?
If you're not on 4EXT, flash 4EXT and reflash the ROM, then try again.
I had read about bluetooth problems on other recoverys...
Issue with BT upgraded rom 10.1 (4)
Jann F said:
What recovery are you using to flash it?
If you're not on 4EXT, flash 4EXT and reflash the ROM, then try again.
I had read about bluetooth problems on other recoverys...
Click to expand...
Click to collapse
Hi Jann,
I am using clockworkmod recovery.
Could somebody please explain why 4ext would make a difference to the BT issue?
Is there a compile error in clockworkmod?
thanks in advance.
Kla
I really don't know why, but it should solve this issue...
Just try 4EXT
klagor said:
Hi Jann,
I am using clockworkmod recovery.
Could somebody please explain why 4ext would make a difference to the BT issue?
Is there a compile error in clockworkmod?
thanks in advance.
Kla
Click to expand...
Click to collapse
I'm not an expert but the recovery ain't the reason. Everyone using the rom, no matter what recovery he flashes with, has it.
It is a bug and the developer has been working on it.
Sent from my Desire S using xda app-developers app
I have also issue with Andromadus Test builds - CM10.1[5] on Desire S with my car bluetooth.
Connect, but doesn't work.
I have no Bluetooth headset but I have other small issues.
- no access to contacts/sms on sim
- notification LED should be green not orange
I'm on build 4 anyone seeing this as well?
Sent from my Desire S using xda app-developers app
Bluetooth JB 4.2.1
On Jellybean 4.2.1 Google started using a new Bluetooth stack, they left Bluez and are now using Broadcom which is still giving problems (even on the official Nexus 4, Nexus 7, etc).
So have a bit of patience
Me am having problem with the wireless... Can't connect to my wireless Internet.. Wireless works just fine with cm7.. And Yes I did clean flash.. Wipe every data I need to
Sent from my HTC Desire S using xda app-developers app
bigkendo said:
Me am having problem with the wireless... Can't connect to my wireless Internet.. Wireless works just fine with cm7.. And Yes I did clean flash.. Wipe every data I need to
Sent from my HTC Desire S using xda app-developers app
Click to expand...
Click to collapse
Are you htcdev unlocked? Did you flash the boot.Img?
Why do they call it rush hour when nothing moves?
- Mork, Mork and Mindy
jugg1es said:
Are you htcdev unlocked? Did you flash the boot.Img?
Why do they call it rush hour when nothing moves?
- Mork, Mork and Mindy
Click to expand...
Click to collapse
Yes I am htcdev unlocked and
Yes I Flashed boot. Img via adb.. The wireless comes on, finds the network but does ever connect successfully and it only seem to only see WPA2 PSK wireless networks only.. Everything was working fine on CM7.2 I connect successfully to different type of wireless network
Sent from my HTC Desire S using xda app-developers app
New Bluetooth stack by Broadcom?
The new bluetooth stack (broadcom) seems to be causing a lot of problem with many users. Why did Google decide to use it anyway?
Could anybody tell me what the supposed advantages of this new stack would be?
I am (almost) forced to revert to CM10.0 because Android 4.1.2 still has bluez. It is quite frustrating so far, sorry to say this.
Is Android 4.2.2 the solution?
imaguari said:
Is Android 4.2.2 the solution?
Click to expand...
Click to collapse
NO. Android 4.2.2 is not the solution.
Also problems with sim contacts and it irritating me. Isnt there a solution?
I just installed cyanogenmod 10.2 on my tab 2 7.0 and i turned on bluetooth however my bluetooth keyboard which worked in stock doesn't show up when scanning. I'm not sure if bluetooth is even working at all.
Jxt. said:
Hello,
does it scan other nearby devices?
Is your tablet visible to other devices?
Click to expand...
Click to collapse
Ok the keyboard connected after a while. It was actually the keyboard that was having issues since after a while I was able to see my neighbors in the dorm next to me s mac book showing up on bluetooth. The only issue I have still is that the delete key doesn't really function as backspace I have to highlight a chunk of text then hit it to delete. I downloaded an app called delete key as backspace but I can't figure out how to set that up. I looked in the screenshot instructions but cannot find a section for physical keyboard.
Jxt. said:
did you check the keyboard layouts?
Click to expand...
Click to collapse
where is that exactly I looked and all I can seem to fine are languages but I looked and theres nothing in there about delete as backspace
I have a P5113 running cm 10.2 nightly. It seems to be finicky with bluetooth. I use sixaxis to connect my PS3 controller, but sometimes it just won't connect. Have to manually turn on/off bluetooth a few times, wait a few seconds, try again. It eventually will work though.
Jxt. said:
Did you see this in your language input settings?
Click to expand...
Click to collapse
No when the keyboard is connected I still don't see physical keyboard options
Jxt. said:
Nightlys are always buggy, i also use the ps3 sixaxis but i never have trouble getting the bluetooth to stay on.
You should check out Pacman ROMs. :laugh:
Click to expand...
Click to collapse
I'm using a version called cm-10.2-20130919-UNOFFICIAL-p3110 It's not a nightly or even an official cyanogenmod supported version I think. I just ended up with it by following a youtube tutorial. This makes me think that when cyanogenmod for the tab 2 7.0 progresses I won't be able to update through cyanogenmod update.
If this is the case will I be able to just flash a rc version of 10.2 when it becomes available without having to wipe data factory reset? I really hate having to reinstall everything
please tell my you can put the home back and multitasking buttons back to normal in that rom. I really don't like what they have done with hiding them and having you drag your finger up from the bottom to get at them.
Really I just want the lightest rom possible using the least amount of resources on my tablet
Jxt. said:
I don't understand how yours look.. screenshot please
Click to expand...
Click to collapse
Uploaded with ImageShack.us
the home button and back and task switch buttons are normal in mine but they r in that annoying circle you have to swipe up to get in pac rom. I looked at a few roms before jumping on the cyanogenmod bandwagon
Jxt. said:
I don't see a circle...
Click to expand...
Click to collapse
no i am running cm 10.2 and pac rom has a half wheel thing. Look at the screenshots in this thread suggested earlier. I was just stating that I don't really like the way the buttons are in that rom as I looked into it earlier
http://forum.xda-developers.com/showthread.php?t=2202854
mikee286 said:
No when the keyboard is connected I still don't see physical keyboard options
I'm using a version called cm-10.2-20130919-UNOFFICIAL-p3110 It's not a nightly or even an official cyanogenmod supported version I think. I just ended up with it by following a youtube tutorial. This makes me think that when cyanogenmod for the tab 2 7.0 progresses I won't be able to update through cyanogenmod update.
If this is the case will I be able to just flash a rc version of 10.2 when it becomes available without having to wipe data factory reset? I really hate having to reinstall everything
Click to expand...
Click to collapse
I see you switched to PAC Rom already but back to your original question.
There was a Bluetooth keyboard problem with CM 10.2 early versions.
I think you were using Cody's version of CM 10.2 in the latest versions of CM 10.2 they fixed the "Bluetooth Keyboard Bug" so if you want to use CM 10.2 you just need the latest versions or you can install an app to fix the Keyboard problem and keep using the older versions.
https://play.google.com/store/apps/details?id=com.heightdev.ganhou&hl=en
hcfte said:
I see you switched to PAC Rom already but back to your original question.
There was a Bluetooth keyboard problem with CM 10.2 early versions.
I think you were using Cody's version of CM 10.2 in the latest versions of CM 10.2 they fixed the "Bluetooth Keyboard Bug" so if you want to use CM 10.2 you just need the latest versions or you can install an app to fix the Keyboard problem and keep using the older versions.
https://play.google.com/store/apps/details?id=com.heightdev.ganhou&hl=en
Click to expand...
Click to collapse
thank you I am downloading the app. I have not switched to pac rom I was debating it but I ended up going with cm because its not bloated.
As I mentioned in an earlier post I think I am using an unofficial build of cm 10.2 built sometime in september. Would I be able to flash an official nightly build without having to wipe data factory reset Again the file I have currently flashed is cm-10.2-20130919-UNOFFICIAL-p3110
mikee286 said:
thank you I am downloading the app. I have not switched to pac rom I was debating it but I ended up going with cm because its not bloated.
As I mentioned in an earlier post I think I am using an unofficial build of cm 10.2 built sometime in september. Would I be able to flash an official nightly build without having to wipe data factory reset Again the file I have currently flashed is cm-10.2-20130919-UNOFFICIAL-p3110
Click to expand...
Click to collapse
I think this http://forum.xda-developers.com/showthread.php?t=2391355 is the Rom you are using it's the same one I use on my P3113. When CM 10.2 first came out they had a BT problem and that app worked for me.
I believe CM fixed the problem before Cody's last release and my keyboard has been working again without needing the App to fix it.
I just checked my Backspace button and it works fine on my BT 3.0 keyboard.
I did switch the Kernel to Next 2.1.2 so I don't know if that makes any difference.
I would ask in Cody's thread about being able to flash the latest CM 10.2 over Cody's without doing a clean install.
Hello SlimKat support,
I had an issue with Xiaomi Piston 2 headphones on the SlimKat ROM 7.2.1... OnePlus One recognize inserting it only one time of 10 inserting...
But with SlimKat ROM 7.4 headphones is not recognized at all I tried 20time insert jack, but OnePlus One did not recognize insertion any of try.
It was OK on the SlimKat ROM 7.0 (stable)...
It is an issue only with Xiaomi Piston 2 headphones... I just tried two other headphones I have at home and OnePlus One recognize them on 1st insertion :good:
Does somebody else have this issue with Piston 2 headphones? Thank you.
Works perfectly with 11s. Maybe they switched the key assignment.
Sent from my A0001 using XDA Free mobile app
reinstall or not reinstall... thats whats going on here...
Hi tssphysicsboi,
hm, that I was worried about...
I like SlimKat as light weigh ROM... so reinstall all apps and configure whole mobile again... uff
I would rather have fix for SlimKat then to give up on it :highfive:
Read more here http://forum.xda-developers.com/one...-kernel-r1-t2800871/post54826109#post54826109
Workaround included. The problem involves CM commits related to audio within the kernel. All ROMs/kernels update their commits on top of what CM already offers so therefore other ROMs/kernels will have this problem.
Short story:
Workaround: Slowly plug the jack half way in.... hear the music start outputting via headset (you have to have auto detect on insertion enabled) but and then a few seconds later I insert the jack fully in and then it works.
Click to expand...
Click to collapse
Can't really do much, use a older custom kernel if you want the phone to detect or do the workaround and be patient while CM works on it.
I use the Pistons myself, great headphones. Best $25 spent
When I use this reduction - http://shop.recall.cz/?cls=stoitem&stiid=7109 and headphones are functioning properly. Certainly there is an error in the rom? Or has oneplus involved as jack iphone?
unavix said:
When I use this reduction - http://shop.recall.cz/?cls=stoitem&stiid=7109 and headphones are functioning properly. Certainly there is an error in the rom? Or has oneplus involved as jack iphone?
Click to expand...
Click to collapse
Yeah a audio splitter works. Its a problem within the kernel related to CM commits. Its being looked into.
...
unavix said:
When I use this reduction - ... and headphones are functioning properly. Certainly there is an error in the rom? Or has oneplus involved as jack iphone?
Click to expand...
Click to collapse
Definitely issue with SlimKat ROM, because it works in other ROMs.
And the reduction means the ROM doesn't cooperate with the "extra" connectors on the jack.
zephiK said:
Yeah a audio splitter works. Its a problem within the kernel related to CM commits. Its being looked into.
Click to expand...
Click to collapse
Great news. Thank you.
djha53k said:
Definitely issue with SlimKat ROM, because it works in other ROMs.
And the reduction means the ROM doesn't cooperate with the "extra" connectors on the jack.
Great news. Thank you.
Click to expand...
Click to collapse
The problem is resolved now. Download a kernel with the newest commits, Franco r14 contains this new commit so its fixed.
zephiK said:
The problem is resolved now. Download a kernel with the newest commits, Franco r14 contains this new commit so its fixed.
Click to expand...
Click to collapse
what kernel? uff, where? How to install it?
I'm sorry, the One is my first Android mobile and I was so so happy I was able to replace CM11s with SlimKat... playing even with kernel... uff
Is there any step by step guide how to replace kernel on SlimKat?
edit: I think... I will rather wait for next build and install it as whole ROM update... then trying to hacking kernel...
djha53k said:
what kernel? uff, where? How to install it?
I'm sorry, the One is my first Android mobile and I was so so happy I was able to replace CM11s with SlimKat... playing even with kernel... uff
Is there any step by step guide how to replace kernel on SlimKat?
Click to expand...
Click to collapse
Its in original android dev franco kernel... download the zip r14 -> put it on your phone -> reboot to recovery mode -> flash it in TWRP and then reboot.
its very easy to do.... be sure to download the AOSP kernel variant since ur on SlimKat.
zephiK said:
Its in original android dev franco kernel... download the zip r14 -> put it on your phone -> reboot to recovery mode -> flash it in TWRP and then reboot.
its very easy to do.... be sure to download the AOSP kernel variant since ur on SlimKat.
Click to expand...
Click to collapse
OK, looks easy...
Where can I get that zip?
I tried search in the OnePlus One section of Kernels, but I got only "No results were found."
Thank you.
------
edit: OK, I found the franco.Kernel-nightly-r14.zip, but it seem to me it is only for CM11s (maybe for CM11 as well), but there is nothing said about SlimKat ROM... can I install then? Or I will brick my One? Thank you.
djha53k said:
OK, looks easy...
Where can I get that zip?
I tried search in the OnePlus One section of Kernels, but I got only "No results were found."
Thank you.
Click to expand...
Click to collapse
OnePlus One -> Original Development -> Franco Kernel r14.
zephiK said:
OnePlus One -> Original Development -> Franco Kernel r14.
Click to expand...
Click to collapse
Got it: http://forum.xda-developers.com/oneplus-one/orig-development/kernel-franco-kernel-r1-t2800871
Thank you very much :good: