Database Info

ROM Backup in Bootloader Mode? MTTY, TerraTermPro?

Hey,
Is there any possibility of performing a backup in Bootloader Mode if you can not enter myphone or spb?
-I have tried MTTY 1.42 following this thread
forum.xda-developers.com/showthread.php?t=246010
->MTTY recognizes the device but keeps telling me "Command Error"
Do I have to use other commands from the Universal?
h/?/help did not work out.
forum.xda-developers.com/showthread.php?t=540290
->gave me no hints.
-I have tried to use Terra Term Pro 2.3 following this thread
forum.xda-developers.com/showthread.php?t=261835 (third post)
-> it seems that TTP can not communicate with it as I am only able to choose COM 3 (no USB, all others tell me "cannot open com X").
If I go on using COM 3, i get connected but no response on "r2sd all"
Is there a way of accessing the phone via Linux?
Any help would be greatly appreciated
(Raph300, Energy 23554 Sense 2.5, Hard-SPL 1.90 OliNex)

In your active sync connection settings on your pc, you need to check 'allow usb connections'. Then set the com to usb. I'm guessing that's the problem (could be wrong, lol).

Farmer Ted said:
In your active sync connection settings on your pc, you need to check 'allow usb connections'. Then set the com to usb. I'm guessing that's the problem (could be wrong, lol).
Click to expand...
Click to collapse
Thanks, but the problem is that AS does not recognize the phone anymore. That is why I am trying to access it in bootloader mode. Or does it make sense to check allow usb connections when the phone is not attached and I would have to shut down AS prior using MMTY/TTP?

You need to change the AS settings so you can connect to the PC through USB when you're in bootloader mode. Just try it.

Farmer Ted said:
You need to change the AS settings so you can connect to the PC through USB when you're in bootloader mode. Just try it.
Click to expand...
Click to collapse
Ok, did not help.
No response from TerraTerm and MTTY does not even tell me "Command Error" anymore
Do I use the right commands?
TTP: "r2sd all"
MTTY: "d2s 70100000 04000000" / "d2s 74100000 00a00000"
Is there another way, another tool for me to try out?
How to access it using Linux?
Many Thanks

[Q] MTP dissabled

I dissabled the MTP on the N5 and now i can't find how to activate it. Does any know its location?
PC doesn't show anything. Only when I enter on Debug mode it shows an Unknown Device. I try to instrall the drivers but it doesn't find anything. Also I tried to install the "Universal Naked Driver" and it doesn't want to install it... Halp pl0x!
SOLVED
I just wiped my data (with the official tool) and everything went ok.

can't connect to hisuite

Hi, Hisuite application on my pc give me connection failed although i did everything , enabled USB debugging , reinstalled the driver and restarted mylaptop & my phone , installed the latest version of hisuite . so is there any solution for this problem please: ) .
i have huawei mate 7 TL10 and running windows 8.1 on my laptop

i don know if this will help u but you can try to get a new adb driver? just search here
Sent from my HUAWEI MT7-TL10

I've the same problem, my head was almost going to breaked from this app, so my suggestion is to follows this steps carefully:
1. Download "Revouninstaller freeware" Not PRO version (select hisuite you've installed, right click, uninstall, select moderate mode to uninstall program from it's root)
2. On your phone activates "Developer mode" by pressing 10-times on "Build Number" located at Phone Settings > About
3. Enable "USB Debugging"
4. Connect your phone to Laptop/PC via "USB cable"
5. Select on your phone "PC Suite"
6. On your laptop/PC, Autorun window with CD logo just close it, Go to "My computer" then "open the virtual CD" then open & install the "HiSuite package" came with your phone.
7. Don't launch the app, Go to install directory of the "HiSuite" in your "Drive C > Program Files" and locate an apk file contains the "HiSuite.Apk"
8. You should send that to your phone via "Bluetooth or E-mail, whatever you wish"
9. On your phone, After copying the apk app Locate that Apk, then install it.
10. Now open it, plug the USB, Now Open the HiSuite App
Don't do anything in the app leave it until it connect automatically by itself.
Note:
A) New Hisuite PC software didn't work with me because i don't have it's HiSuite.Apk of the same version.
B ) If you've installed HiSuite.apk from outside sources than the one came with your phone I suggest you delete from your phone via "App Manager".
C) I will upload my "HiSuite 1.8.10.apk" just in case if yours didn't work or didn't find it BUT Your PC Software should be of the same version I.e. HiSuite 1.8
Download link - http://www39.zippyshare.com/v/HavIU39W/file.html
D) If no option works, close both apps in your phone and Laptop/PC, reopen app on your Phone and select "connect via wireless mode" get the password, open app on your laptop/PC select "wireless mode" type password and press "connect"
Good Luck

Same problem
Hey,
I had same problem with my phone before. I change the port usb 3.0 to 2.0. It's working fine now. So try with usb 2.0 port. Good luck
Thanks
Bejoy

ptbejoy said:
Hey,
I had same problem with my phone before. I change the port usb 3.0 to 2.0. It's working fine now. So try with usb 2.0 port. Good luck
Thanks
Bejoy
Click to expand...
Click to collapse
Thanks man ! Now my HiSuite is working !

idk if anyone had this problem but i had my tablet (m5 mediapro) locked and when i unlocked it everything went perfectly. stupid me, hehe.

How to connect to HiSuite
I could not connect, and landed in this discussion which did not give me any solution.
Then after much reading, I found the solution that unlocked things for me :
1.Go to settings/Developer options, and set "Select USB configuration" as Media Transfer Protocol(MTP)
2. Start Hisuite and lo and behold, now when I enable hdb, I get the dialog to allow hiSuite and am able to click OK.
Note that enabling MTP also made Windows 10 capable to access the phone memory through a window, like a USB stick.
I post this for others in the same predicament, hoping it gives them the solution

thank you very much its working
II have just found hisuit.apk in C programfiles hisuite apk
send it to my self trough email and install it -allowing installation from other sources first(.
After this next connecting was not saying connecting and making loop till the infinity.
thanks a lot
alkot said:
I've the same problem, my head was almost going to breaked from this app, so my suggestion is to follows this steps carefully:
1. Download "Revouninstaller freeware" Not PRO version (select hisuite you've installed, right click, uninstall, select moderate mode to uninstall program from it's root)
2. On your phone activates "Developer mode" by pressing 10-times on "Build Number" located at Phone Settings > About
3. Enable "USB Debugging"
4. Connect your phone to Laptop/PC via "USB cable"
5. Select on your phone "PC Suite"
6. On your laptop/PC, Autorun window with CD logo just close it, Go to "My computer" then "open the virtual CD" then open & install the "HiSuite package" came with your phone.
7. Don't launch the app, Go to install directory of the "HiSuite" in your "Drive C > Program Files" and locate an apk file contains the "HiSuite.Apk"
8. You should send that to your phone via "Bluetooth or E-mail, whatever you wish"
9. On your phone, After copying the apk app Locate that Apk, then install it.
10. Now open it, plug the USB, Now Open the HiSuite App
Don't do anything in the app leave it until it connect automatically by itself.
Click to expand...
Click to collapse

Having the same issue with my Honor 10. I cannot connect to my pc. it comes up as connecting on Hisuite but it says like that. Im using windows 7. Any help and advice with this will be very much appreciated.

Nexus 5 multiple problems

Hi guys, i have a problem with my Nexus 5.
I was trying to flash 7.1.1 with TWRP as allways (i flash roms every time) but i made wipe of the internal storage so now i have any OS installed on my phone. I had this problem sometimes but now i am using windows 10 and my PC don`t recognise my phone. I have tried a lot of ways to solve it but anything works. What can i do? it is possible to flash a rom with an otg cable?
Thanks and sorry for my english!
EDIT: when i open a cmd window it says "waiting for device". I tried in another pc and it says "its not any internal or external command".

Tried different USB cables and USB 2.0 ports? Tried another computer?

audit13 said:
Tried different USB cables and USB 2.0 ports? Tried another computer?
Click to expand...
Click to collapse
Yes both, but nothing.

So nothing shows up in device manager when you connect the phone in fastboot mode?

audit13 said:
So nothing shows up in device manager when you connect the phone in fastboot mode?
Click to expand...
Click to collapse
Nothing.
I have an otg but when i'm into recovery mode, i select "mount" and then "usb otg" but it doesn't select.

Sounds like there could be something wrong with the phone's internal USB flex cable.

audit13 said:
Sounds like there could be something wrong with the phone's internal USB flex cable.
Click to expand...
Click to collapse
I tried in another pc and it works, but when i open a cmd window it says "its no internal o external command" so idk

When connected to the other computer, what device shows up in Windows' Device Manager?

Wipe the internal storage again, this could help. Flash factory image through fastboot if you can/want. this should fix it

Well, i tried in another pc and i have a new problem. Now i go to device manager and it appears how "unkown device". I tried to update drivers but nothing.
Few weeks ago i had problems with de power button and i had to repair it. The service centre changed the button and the usb port i think, because it seems to be a little diferent. I think it could be the problem.

Hi,
I have the same issue when using Windows 10.
1 - Connect your phone to the PC
2 - Grand it file transfer from your phone notification if it isn't an automatic connection.
3 - Open Device Manager on your PC.
4 - Scroll down look for Universal Serial Bus Controller.
5 - You will see and unknown device with exclamation mark.
6 - Right click it and Update driver.
7 - Select "Browse my computer for driver software".
8 - key in this "C:\Windows\INF" or simply copy-paste it from here.
9 - Next
10 - You will be displayed with list of compatible drivers. (if not, tick show compatible drivers).
11 - Select "USB Composite Driver"
12 - Done. your device will be connected.
13 - Profit..!!

Did the repair shop use an OEM USB replacement? Was the USB port giving problems before being replaced?

Problem solved. The usb plug was badly welded.
Thanks for your help!

Question Can't find my phone as Diag mode on device manager

I tried everything but no success yet to find my s22 U as diag mode on the win device manager
Tried via Adb
Tried via *#0808#
Tried via Terminal emulator
Rooter via Magisk
Any help?
Thanks

Samsung Android ADB Interface. It shows the correct device when you install the drivers. First he Diagnostics menu is on the phone, you don't need to plug it into your PC.
Dial *#0*# for one of the menus.
Try *#9090#
Also google "S22 DIALER CODES".
Download the Official Samsung Mobile USB drivers from the samsung site in order to get your device to show up in device manager in Windows, BTW.
g2g if I don't want to get slapped by my old lady for being on the puter again.
...
?!!

perfectswanson said:
Samsung Android ADB Interface. It shows the correct device when you install the drivers. First he Diagnostics menu is on the phone, you don't need to plug it into your PC.
Dial *#0*# for one of the menus.
Try *#9090#
Also google "S22 DIALER CODES".
Download the Official Samsung Mobile USB drivers from the samsung site in order to get your device to show up in device manager in Windows, BTW.
g2g if I don't want to get slapped by my old lady for being on the puter again.
...
?!!
Click to expand...
Click to collapse
Yea i went through the Dm+Modem+Adb option by *#0808# but does not show on device manager as Diag.
i have the samsung drivers from their site

Yeah, cause it's not going to. Read my post.
Diagnostics menu is on the phone, you don't need to plug it into your PC.
Diagnostics menu is on the phone, you don't need to plug it into your PC.
Diagnostics menu is on the phone, you don't need to plug it into your PC.
Diagnostics menu is on the phone, you don't need to plug it into your PC.
For Service Mode,
DIAL:
*#27663368378#
Also Check this out:

perfectswanson said:
Yeah, cause it's not going to. Read my post.
Diagnostics menu is on the phone, you don't need to plug it into your PC.
Diagnostics menu is on the phone, you don't need to plug it into your PC.
Diagnostics menu is on the phone, you don't need to plug it into your PC.
Diagnostics menu is on the phone, you don't need to plug it into your PC.
For Service Mode,
DIAL:
*#27663368378#
Also Check this out:
Click to expand...
Click to collapse
Nothing changed.

It doesn't change the device in device manager when you change the USB mode. It always says the same thing, only time the device changes in device manager, is when it's in fastboot mode, Download Mode, or EDL mode. You can change the usb settings back and forth and it will not change the device in windows. I think we're talking about different things. Try Holding Vol+ While plugging in the phone to the computer, while the phone is off, AND without touching the side-key or power button. But I think that is just High Verbosity logging. Just out of curiosity, what are you trying to accomplish?

All guides i saw show the phone as Diag on the win device manager...
I lost my imei. You have replied my other post asking about the phone is Sm-s908e.
I'm trying to backup Qcn so i can rewrite imei
Following this guide https://www.hovatek.com/forum/thread-26051.html
But not success to put the phone on Diag mode to be recognized on Qfil
Now I'm trying to flash original rom to see any change
Thanks for the help

I have managed to put the phone on diag mode using Adb.
There was a diferent code on Adb
I was using: "
Code:
setprop sys.usb.config diag,adb
"
And the code that managed to put the s22U into diag is: "
Code:
setprop sys.usb.config rndis,diag,adb
"
(Thx to this This thread)
Now that i have access to my Qcn file it looks corrupted (Or encrypted) comparing to a generic Qcn that i found here on the forum
looking what i can accomplish