Database Info

Xxle4 flash guide (no wifi error)

DON'T FLASH CF-ROOT AFTER YOU'VE FLASHED XXLE4 (if you don't wanna have problems with wifi).
THIS IS WHAT I'VE DONE:
FLASHED XXKPE.
FLASHED XXKPQ THEN ROOTED WITH CF-ROOT BY AMIT.
FACTORY RESET *2767*3855#.
INSTALLED MOBILE ODIN.
FLASHED XXLE4 FROM EXTERNAL-SD USING MOBILE ODIN (SELECT ALL THE OPTIONS: "ENABLE EVER ROOT", "INJECT S.U. AND MOBILE ODIN", "WIPE CACHE AND DALVIK").
AFTER INSTALLATION IS COMPLETE JUST REBOOT.
EVERYTHING WORKS PERFECTLY, ROOTED PHONE AND NO MORE WIFI ERROR.

ac1989 said:
DON'T FLASH CF-ROOT AFTER YOU'VE FLASHED XXLE4 (if you don't wanna have problems with wifi).
THIS IS WHAT I'VE DONE:
FLASHED XXKPE.
FLASHED XXKPQ THEN ROOTED WITH CF-ROOT BY AMIT.
FACTORY RESET *2767*3855#.
INSTALLED MOBILE ODIN.
FLASHED XXLE4 FROM EXTERNAL-SD USING MOBILE ODIN (SELECT ALL THE OPTIONS: "ENABLE EVER ROOT", "INJECT S.U. AND MOBILE ODIN", "WIPE CACHE AND DALVIK").
AFTER INSTALLATION IS COMPLETE JUST REBOOT.
EVERYTHING WORKS PERFECTLY, ROOTED PHONE AND NO MORE WIFI ERROR.
Click to expand...
Click to collapse
I have XXKPQ Full (pit, bootloader, pda, phone, and csc). Do i have to flashed from XXKPE too? or right with XXKPQ?

you don't need to if it's full...anyway this is an old post you should install the latest available rom instead of xxle4 download xwlf2 from samfirmware

unroot i9003

hey guys need some help...
1. i've rooted my phone and its running on XXKPU + CF-ROOT
2. i want to unroot it back to my original DXKP9 , i just need to flash the the tar file as pda.. or do i need to
- flash also the other files from XXKPE eg GT-I9003-CSC-MULTI-OXAKPE.tar

Even I'm pretty new to Samsung, butto get to stock XXKPU/XXKPQ,
I would recommend the following steps.
1. Download stock xxkpe.
2. Via Odin in download mode flash the pit file (check repartition option)
Screen would turn black. This option would repartition in rfs format.
Restart the phone in download mode.
3. Then other files need to flashed, pda, csc, modem(phone) and bootloader.
Google which file to selected in which option.
4. after flashing this, you would be on stock xxkpe.
5. Then flash stock xxkpu pda file. Restart.
This would remove the cwm add well as root permissions.
Press thanks if helped.
Sent from my GT-I9003 using xda premium

well i was on stock DXKP9
then i went over to XXKPU + CF-root...
and now i want to go back to stock DXKP9
ill take note of your info.. but not sure if that is the correct way... or not

If you use cf root just go to recovery mode there is root/unroot buttong there.

UserX007 said:
well i was on stock DXKP9
then i went over to XXKPU + CF-root...
and now i want to go back to stock DXKP9
ill take note of your info.. but not sure if that is the correct way... or not
Click to expand...
Click to collapse
Following those is correct . But replaced kpu with dxkp9
Sent from my GT-I9003 using Tapatalk 2

marshygeek said:
If you use cf root just go to recovery mode there is root/unroot buttong there.
Click to expand...
Click to collapse
chongns said:
Following those is correct . But replaced kpu with dxkp9
Sent from my GT-I9003 using Tapatalk 2
Click to expand...
Click to collapse
thanks guys ... wanna send my phone for warranty, cause got some weird **** problem, making calls after get connected like 3 to 6 seconds the call automatically terminates..

[Q] How to revert back to stock DDLF2 from rooted state?

Hi,
I have rooted DDLF2 (using CF-ROOT). Now that I no more need root (stopped using an app that needed root), I need to get back to stock DDLF2.
I have already unrooted it using recovery mode > unroot.zip method.
All I need is 100% samsung stock DDLF2 on the phone now, without the cf-kernel, cf-recovery and apps that the rooting process brought in.
Please advise...
Thanks

Dude thats simple...
Just flash ddlf2 using odin and u are good to go !!
Sent from my GT-I9003

simratcs said:
Dude thats simple...
Just flash ddlf2 using odin and u are good to go !!
Sent from my GT-I9003
Click to expand...
Click to collapse
Yes, just clean flash and the root is gone
Sent from my GT-I9003 using Tapatalk 2

agnivo007 said:
Hi,
I have rooted DDLF2 (using CF-ROOT). Now that I no more need root (stopped using an app that needed root), I need to get back to stock DDLF2.
I have already unrooted it using recovery mode > unroot.zip method.
All I need is 100% samsung stock DDLF2 on the phone now, without the cf-kernel, cf-recovery and apps that the rooting process brought in.
Please advise...
Thanks
Click to expand...
Click to collapse
take the CR-ROOT zp file, open up with winrar, replace the file with DDLF2 normalboot.img, than flash with odin PDA. you will get back the stock kernel or maybe you will have boot looping, if not bootlooping, reboot the phone once, than factory reset.
try at your own risk.

chongns said:
take the CR-ROOT zp file, open up with winrar, replace the file with DDLF2 normalboot.img, than flash with odin PDA. you will get back the stock kernel or maybe you will have boot looping, if not bootlooping, reboot the phone once, than factory reset.
try at your own risk.
Click to expand...
Click to collapse
Dude i think he is a new member so dont tell him such stuff that is a bit confusing for a newbie...
Let him just clean flash ddlf2
Sent from my GT-I9003

flash xxkpe then ddlf2

karanmirchandani96 said:
flash xxkpe then ddlf2
Click to expand...
Click to collapse
Hi, can I flash xxkpe on CWM recovery mode and update to DDLF2 from kies?
Just wanted to know can stock ROMs can be flashed from CWM recovery, just like cROM.

No u have to flash them via Odin only.
sent from Samsung galaxy S i9003 Remics JB v3

Thanks for the Info!!!

THANKS!
Flashed via ODIN as PDA, did wipe, cache clean and now I'm set...

hi i flashed ddlf2 everything is working except my wifi is there any solution?

agnivo007 said:
Hi,
I have rooted DDLF2 (using CF-ROOT). Now that I no more need root (stopped using an app that needed root), I need to get back to stock DDLF2.
I have already unrooted it using recovery mode > unroot.zip method.
All I need is 100% samsung stock DDLF2 on the phone now, without the cf-kernel, cf-recovery and apps that the rooting process brought in.
Please advise...
Thanks
Click to expand...
Click to collapse
use the android development section and download the ddlf2 files then use odin to flash it

amsad said:
hi i flashed ddlf2 everything is working except my wifi is there any solution?
Click to expand...
Click to collapse
Maybe this happened because you didn't clean install so here are the steps:
Download XXKPE from here.
Flash XXKPE by following the XXKPE install instructions (the archive should contain odin3 v1.83 or v1.85 if not here is odin3 v1.85)
Download DDLF2 from here (DDMF1 is the latest value pack so it's smoother and with better battery life)
Install DDFL2 or DDMF1( recommended) by following the value pack instructions (use only odin3 v3.04)
that's it, enjoy your stock rom
if this helped you ...hit the thanks button pls

i9003 reflash

hi guys
i just got this phone but i'm a bit blur about it
here's the info
firmware : 2.3.6
baseband : JXKP3
build : gingerbread.JVKPB
just wanna know, would it be safe if i use ODIN to flash the phone with I9003DDLF2_I9003ODDLF2_INU.zip ?
or should i flash it with JXKP3 first then flash the DDLF2 ?
i wanted a clean format/reflash.i dont mind losing root as i can root it again next time
thanks

fitree said:
hi guys
i just got this phone but i'm a bit blur about it
here's the info
firmware : 2.3.6
baseband : JXKP3
build : gingerbread.JVKPB
just wanna know, would it be safe if i use ODIN to flash the phone with I9003DDLF2_I9003ODDLF2_INU.zip ?
or should i flash it with JXKP3 first then flash the DDLF2 ?
i wanted a clean format/reflash.i dont mind losing root as i can root it again next time
thanks
Click to expand...
Click to collapse
dont worry mate... since you are on 2.3.6 just go ahead and do it JXKP3
download the CF-Root file from here for JXKP3
http://forum.xda-developers.com/showthread.php?t=1331253
also download Odin
and follow these steps
1.Open ODIN
2.get you phone in download mode (holding power + home + volume down).
3.Connect your phone to PC via USB cable.(its better to make sure your antivirus and firewall are disabled and you have correct samsung USB drivers installed)
4.Check if your phone is detected by odin you must see color yellow in the box with the port no. and a word "Added!" in log screen.
5.Now click PDA then browse the .tar file (place the downloaded CF-root file i.e, your JXKP3 file in this case).Then click Start.
6.Wait till its done,dont panic.Phone will boot itself. Your now rooted. But you need to wipe cache in recovery mode to do this hold power + home + volume up then clear cache and dalvik cache. Reboot. Done.

mustafahussain said:
dont worry mate... since you are on 2.3.6 just go ahead and do it JXKP3
download the CF-Root file from here for JXKP3
http://forum.xda-developers.com/showthread.php?t=1331253
also download Odin
and follow these steps
1.Open ODIN
2.get you phone in download mode (holding power + home + volume down).
3.Connect your phone to PC via USB cable.(its better to make sure your antivirus and firewall are disabled and you have correct samsung USB drivers installed)
4.Check if your phone is detected by odin you must see color yellow in the box with the port no. and a word "Added!" in log screen.
5.Now click PDA then browse the .tar file (place the downloaded CF-root file i.e, your JXKP3 file in this case).Then click Start.
6.Wait till its done,dont panic.Phone will boot itself. Your now rooted. But you need to wipe cache in recovery mode to do this hold power + home + volume up then clear cache and dalvik cache. Reboot. Done.
Click to expand...
Click to collapse
err..
i'm not asking about on how to root
i'm asking is it OK for me to directly flash my phone to DDLF2 using ODIN ?
i'm on JXKP3 right now

fitree said:
err..
i'm not asking about on how to root
i'm asking is it OK for me to directly flash my phone to DDLF2 using ODIN ?
i'm on JXKP3 right now
Click to expand...
Click to collapse
appologies I didnt noticed that.
for me when I was rooted on 2.3.6 I could flash anything... but I am not sure if its a safe way

mustafahussain said:
appologies I didnt noticed that.
for me when I was rooted on 2.3.6 I could flash anything... but I am not sure if its a safe way
Click to expand...
Click to collapse
Its safe mate. If you back from A4, you need to flash XXKPE+Pit then flash DDLF2. In another word, its safe, as long you follow the guide and be careful.
Sent from my GT-I9003 using xda app-developers app

Go ahead its very safe even I have flashed my phone with ddlf2 many time no problems till now
Sent from my GT-I9300 using xda premium

Rich'Dawg' said:
Its safe mate. If you back from A4, you need to flash XXKPE+Pit then flash DDLF2. In another word, its safe, as long you follow the guide and be careful.
Sent from my GT-I9003 using xda app-developers app
Click to expand...
Click to collapse
thanks !
well,in my case, do i need to use the .pit file aswell ?
i've downloaded the firmware and it only contains one file which is the .tar.md5

nikhil18 said:
Go ahead its very safe even I have flashed my phone with ddlf2 many time no problems till now
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
thanks !
well,in my case, do i need to use the .pit file aswell ?
i've downloaded the firmware and it only contains one file which is the .tar.md5

fitree said:
thanks !
well,in my case, do i need to use the .pit file aswell ?
i've downloaded the firmware and it only contains one file which is the .tar.md5
Click to expand...
Click to collapse
Go ahead, its safe. You are using Gingerbread right? I forgot, :silly:. If you are using A4, bright idea to download pit.
And after reading the 1st post, yes its safe mate, just remember follow the guide and remember the thanks button under my post, cheers
P.S: Do not fear of soft/hard brick, if you are Gingerbread user. The farthest you can get is bootloop, unless you are flashing i9000 stock ROM.
Sent from my GT-I9003 using xda app-developers app

reflash 9003
i have a 9003 with 2.6.35.7.cl882023 kernel
base band i9003ddle1
firmware 2.3.6
i want to reflash it using odin .
should i directly flash the zip file?

[Q] Bootloop after StockRom flashing

Heyo everyone
I'm coming from cm10.1 and now i wanted to go back to stock.
so I've downloaded I9105PXXAMC2 from samfirmware.com
unfortunately after flashing via odin i got bootloop
i've tried to wipe from android recovery but then there's only a red triangle
is there any solution?
it's almost impossible for me to download another firmware because my internet speed sucks so massive

Gh3ttoKiLL4 said:
Heyo everyone
I'm coming from cm10.1 and now i wanted to go back to stock.
so I've downloaded I9105PXXAMC2 from samfirmware.com
unfortunately after flashing via odin i got bootloop
i've tried to wipe from android recovery but then there's only a red triangle
is there any solution?
it's almost impossible for me to download another firmware because my internet speed sucks so massive
Click to expand...
Click to collapse
Install CWM with odin and wipe your data cache and dalvik cache from there then it will boot up fine

safariking said:
Install CWM with odin and wipe your data cache and dalvik cache from there then it will boot up fine
Click to expand...
Click to collapse
I think installing clockworkmod for wiping isn't an option. The op flashed stock Rom probably because he wants his warranty back
Installing clockworkmod again would void it again. If the stock Rom you downloaded is the one you had before rooting, then try flashing it again. If it's not, then download your originally out of box stock Rom and flash it with Odin.
Like...the same baseband version as the one you had before any modification of your system
Sent from my GT-I9105P using xda premium

Brian_SGW_CM9 said:
I think installing clockworkmod for wiping isn't an option. The op flashed stock Rom probably because he wants his warranty back
Installing clockworkmod again would void it again. If the stock Rom you downloaded is the one you had before rooting, then try flashing it again. If it's not, then download your originally out of box stock Rom and flash it with Odin.
Like...the same baseband version as the one you had before any modification of your system
Sent from my GT-I9105P using xda premium
Click to expand...
Click to collapse
You need to wipe it otherwise it won't boot up and if you had cm10.1 you must wipe your internal sd card to
if you install cyanogenmod and you odin back to stock rom the stock rom will simply not boot if no wipe was done!!!

safariking said:
You need to wipe it otherwise it won't boot up and if you had cm10.1 you must wipe your internal sd card to
if you install cyanogenmod and you odin back to stock rom the stock rom will simply not boot if no wipe was done!!!
Click to expand...
Click to collapse
I thought flashing through Odin already wipes..
So if I want to Odin back. With the clockworkmod, I first wipe, then flash stock. Right?
Sent from my GT-I9105P using xda premium

No
odin back first and after that install cwm and wipe!
Sent from my awesome S2 Plus

safariking said:
No
odin back first and after that install cwm and wipe!
Sent from my awesome S2 Plus
Click to expand...
Click to collapse
Can You please be more specific? I'm trying to install stock rom, and it's intering loop on boot. Trying to instal CWM via Odin - no success.

Did you wipe before flashing via Odin?
Sent from my GT-I9105P using XDA Premium 4 mobile app

Brian_SGW_CM9 said:
Did you wipe before flashing via Odin?
Sent from my GT-I9105P using XDA Premium 4 mobile app
Click to expand...
Click to collapse
That's a question too... How to do wipe, if all I have is official bootloader, with debugging OFF, and loop / stuck on SUMSUNG logo?
(I don't care of any kind of warranty, just want to boot up this brick with ANY ROM!)

borsiknet said:
That's a question too... How to do wipe, if all I have is official bootloader, with debugging OFF, and loop / stuck on SUMSUNG logo?
(I don't care of any kind of warranty, just want to boot up this brick with ANY ROM!)
Click to expand...
Click to collapse
Can you reach download mode?
Sent from my GT-I9105P using XDA Premium 4 mobile app

Brian_SGW_CM9 said:
Can you reach download mode?
Sent from my GT-I9105P using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yes, I'm trying all original firmware from sammobile, that appropriate to this model. Sometimes it geting custom BIN, and bootloader taking it back to samsung official.

borsiknet said:
Yes, I'm trying all original firmware from sammobile, that appropriate to this model. Sometimes it geting custom BIN, and bootloader taking it back to samsung official.
Click to expand...
Click to collapse
Yep, that's the only way
Sent from my GT-I9105P using XDA Premium 4 mobile app

Brian_SGW_CM9 said:
Yep, that's the only way
Sent from my GT-I9105P using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Maybe any way to know origin of the phone by S/N to which country he belong?

borsiknet said:
Maybe any way to know origin of the phone by S/N to which country he belong?
Click to expand...
Click to collapse
Find your country's name on sammobile. I mean of the firmware page of sammobile
Sent from my GT-I9105P using XDA Premium 4 mobile app

Brian_SGW_CM9 said:
Find your country's name on sammobile. I mean of the firmware page of sammobile
Sent from my GT-I9105P using XDA Premium 4 mobile app
Click to expand...
Click to collapse
There are no my contry ROM. I stucked with bootloops and debug options OFF. What to do???! It's driving me crazy...

After almost two weeks of seeking for solutions all over internet, the problem was solved. First of all there are no way to root without debuging off via odin o any other tool. All what you have, is just to look for your original firmware of the phone, and it supposed to be four file package.
Looks like:
FULL_CSC_I9105PXXAMC2_I9105POXAAMC1_I9105PXXAMC1_DBT.tar.md5
FULL_MODEM_I9105PXXAMC2_I9105POXAAMC1_I9105PXXAMC1_DBT.tar.md5
FULL_PDA_I9105PXXAMC2_I9105POXAAMC1_I9105PXXAMC1_DBT.tar.md5
s2ve.pit
In this case it was german phone so files end with DBT.
CSC - as CSC
MODEM - as CP or PHONE
PDA - as AP or PDA
and pit file for re-partition.
The name of whole package is GT-I9105P-DBT-I9105PXXAMC2_Service-Firmware.zip
For those asking for delete dalvik/cache/factory reset, the solution is - RE-PARTITION!
I used also option Nand Erase All, just to be sure I delete everything.
All other operations goes as usual in Odin.
I can't post links here, bat me mercy on those looking for solution for days and weeks long.
So here is link that I found on some forum that leading to (thanx Goshhhh!!!) to Google docs, so download was just 5 min. long.
Here is German (DBT) package, and some other usefull links. Use G. translator to understand.
h t t p : / / galaxysclub.ru/obzor-osnovnyh-funkcij-obsuzhdenie-i-reshenie-problem/2111-pomogite-s-i9105-proshivki-dlya-i9105 . html
Just remove spaces, where needed. This is a Russian forum. Respect and thousand thanx to Сергей, author of usefull post with links provided, once again THANX a lot, Sergej!

borsiknet said:
After almost two weeks of seeking for solutions all over internet, the problem was solved. First of all there are no way to root without debuging off via odin o any other tool. All what you have, is just to look for your original firmware of the phone, and it supposed to be four file package.
Looks like:
FULL_CSC_I9105PXXAMC2_I9105POXAAMC1_I9105PXXAMC1_DBT.tar.md5
FULL_MODEM_I9105PXXAMC2_I9105POXAAMC1_I9105PXXAMC1_DBT.tar.md5
FULL_PDA_I9105PXXAMC2_I9105POXAAMC1_I9105PXXAMC1_DBT.tar.md5
s2ve.pit
In this case it was german phone so files end with DBT.
CSC - as CSC
MODEM - as CP or PHONE
PDA - as AP or PDA
and pit file for re-partition.
The name of whole package is GT-I9105P-DBT-I9105PXXAMC2_Service-Firmware.zip
For those asking for delete dalvik/cache/factory reset, the solution is - RE-PARTITION!
I used also option Nand Erase All, just to be sure I delete everything.
All other operations goes as usual in Odin.
I can't post links here, bat me mercy on those looking for solution for days and weeks long.
So here is link that I found on some forum that leading to (thanx Goshhhh!!!) to Google docs, so download was just 5 min. long.
Here is German (DBT) package, and some other usefull links. Use G. translator to understand.
h t t p : / / galaxysclub.ru/obzor-osnovnyh-funkcij-obsuzhdenie-i-reshenie-problem/2111-pomogite-s-i9105-proshivki-dlya-i9105 . html
Just remove spaces, where needed. This is a Russian forum. Respect and thousand thanx to Сергей, author of usefull post with links provided, once again THANX a lot, Sergej!
Click to expand...
Click to collapse
If anyone have problem with bootloop when flash original rom, solution is simple. Just go to recovery. Samsung has stock recovery. Wipe data/factory reset and reboot phone. Thats all . PS to go to recovery turn off phone. Wait 3 seconds. hold home buton, volume up and power buton in same tame.

jaskof1 said:
If anyone have problem with bootloop when flash original rom, solution is simple. Just go to recovery. Samsung has stock recovery. Wipe data/factory reset and reboot phone. Thats all . PS to go to recovery turn off phone. Wait 3 seconds. hold home buton, volume up and power buton in same tame.
Click to expand...
Click to collapse
That was a problem, loops after flashing with Odin.

jaskof1 said:
If anyone have problem with bootloop when flash original rom, solution is simple. Just go to recovery. Samsung has stock recovery. Wipe data/factory reset and reboot phone. Thats all . PS to go to recovery turn off phone. Wait 3 seconds. hold home buton, volume up and power buton in same tame.
Click to expand...
Click to collapse
Well this worked for me just fine

Boot into cwm
Go tot mounts and storage
Format everything (no ext sdcard
Flash firmware with Odin andere cwm would be deleted