Database Info

[FIX] Flashing Stock Rom/Custom ROM over Angeeks ROM

I'm facing a weird problem. I can't flash stock rom via Odin. The phone is always stuck on the Samsung screen. Tried xxlq7/xxlq9. I'm on angeeks rom. Wanted to try the blueberry sensation rom.
So for that I tried flashing xxlq9 again as recommended and faced this issue.
EDIT [FIX]
As suggested by Kartik pat i was able to successfully flash stock rom over angeeks rom
I followed the following steps:
1. Take tb for all apps [angeeks rom]
2. Restore any gingerbread backup you might have from CWM. Boot your device.
3. Flash xxlq9 via Odinv3. Boot device
4. Flash cwm4. Boot device.
5. Flash ardatdat kernel v4.0 [ensures the erase bug issue is resolved]
6. Boot System
7. Reboot into recovery. Wipe data,cache,dalvik cache.
8. Boot system and tada
If you want to flash bb rom over this then:
1. Flash the bb rom v1. Reboot.
2. Flash the bug fix zip. Reboot.
3. Flash sensation mod
P.s. this method worked for me using the gb backup and cwmv4.
Hope this helps.
EDIT 2:
As posted by vikesh....
Hey Buddies,
I did few R&D over Angeek ROM. As we are facing problem after Flashing NORDIC ROM over this One.
Here is the procedure:
If you Have any Back of ICS / GB then only apply these changes. Coz I have already did this.
Caution: Please take your Backup before then Try to Do below mentioned steps.
1) Requirements:
1.1) Must b having Ardatdat's eMMC erased Kernel i.e. V4.0 & higher.
1.2) ODIN V 3.07
1.3) Latest Kies Installed (for USB drivers)
1.4) Latest XXQL9 NORDIC ROM
1.5) CMW 6.0.1.1 for CMW flashing & CMW 6.0.1.1.tar for ODIN.
1.6) A PC..(of course):silly:
2) Flashing:
As per Suggestion by chandanbs, NORDIC ROM is almost come with Full in System Rom Partition.
So, here is few suggestion which was already suggested by our Great Mj.vikram buddy over this Thread & see Post no #8 there.
Hope, your ROM Partition is 619/620MB.
After Flashing above procedure, If you have flashed Ardatdat's Kernel first & have installed any ROM Specially ANGEEK ROM(coz having problem in that rom particularly as per users) Then Follow the Process:
2.1) Go to CMW Recovery MOD & Install Latest CMW 6.0.1.1
2.2) Wipe Data/Factory Reset.
2.3) Go to CMW recovery again & Just Restore you previous backup of any ROM.
2.4) Open ODIN 3.07(Right Click over Exe & select "Run As Administrator") & Follow the steps for flashing Stock ROM using this tutorial
2.5) After Booting just Flash CMW V6 using ODIN 3.07.
2.6) Don't Wipe Data / Factory Reset or Wipe cache / dalvik Cache. Just let it boot.
Now you have Successfully Flashed Nordic ROM over Angeek / Any other ROM.
Sent from my GT-I9103 using xda app-developers app

Try to restore ur cwm backup of gb if u have and den flash ics
I did the same thing i was also using angeek's rom and now i m using BB

Can I restore my cwm backup over xxlq9?
Sent from my GT-I9103 using xda app-developers app

pulley06 said:
Can I restore my cwm backup over xxlq9?
Click to expand...
Click to collapse
yes you can and which ODIN version you are using for flashing better to flash using v3......

mj.vikram said:
yes you can and which ODIN version you are using for flashing better to flash using v3......
Click to expand...
Click to collapse
Mj i had similar issue...i want to taste mazel n was flashin ics stock rom..using odin 3.x but it stuck in mid way durin flashin...
Wat cld b d reason ?? Later i restored my cwm backup..
Sent from my GT-I9103 using Tapatalk 2

mj.vikram said:
yes you can and which ODIN version you are using for flashing better to flash using v3......
Click to expand...
Click to collapse
Yeah I was using v3
Okay so I wanted to use the bb rom...are these steps enough?
1. Take tb for all apps
2. Restore backup
3. Flash xxlq9 via Odin
4. Flash cwm
5. Flash ardatdat kernel
6. Wipe data
7. Wipe cache
8. Flash bb v1,fixes, sensation mod.
Sent from my GT-I9103 using xda app-developers app

vipul12389mehta said:
Mj i had similar issue...i want to taste mazel n was flashin ics stock rom..using odin 3.x but it stuck in mid way durin flashin...
Wat cld b d reason ?? Later i restored my cwm backup..
Click to expand...
Click to collapse
i am also not sure buddy i also faced this kind of issue once then i restored to GB and flashed it again, but i flashed Mazel on Leaked ICS so i thought it was the problem ......
pulley06 said:
Yeah I was using v3
Okay so I wanted to use the bb rom...are these steps enough?
1. Take tb for all apps
2. Restore backup
3. Flash xxlq9 via Odin
4. Flash cwm
5. Flash ardatdat kernel
6. Wipe data
7. Wipe cache
8. Flash bb v1,fixes, sensation mod.
Click to expand...
Click to collapse
yes buddy you are correct, you need to wipe all 3 ie data, cache & Dalvic cache..
But i feel its not mandatory to flash XXLQ9 because i use to flash on my Leaked ICS and it was working fine when i used it.....

i followed all the steps mentioned above...the phone booted to the home screen of xxlq9...flashed bb rom successfully as per cwm...but the phone is stuck on the samsung screen that comes after galaxy r appears

vipul12389mehta said:
Mj i had similar issue...i want to taste mazel n was flashin ics stock rom..using odin 3.x but it stuck in mid way durin flashin...
Wat cld b d reason ?? Later i restored my cwm backup..
Sent from my GT-I9103 using Tapatalk 2
Click to expand...
Click to collapse
It gets stuck for like 10-15 secs but later it flashes ROM properly,
@mj whats wrong to do it with V1.85?
@pulley I also faced same problem yesterday, but I think that time i did not mount/unmout system so I reflashed BB again by pressing two times mount>unmount (final would be unmount/system), so just press two times, still not booting then again wipe all 3 (cache,dalvik and data)

I think there is few points we should consider while flashing BB or MAZEL2 rom if u are on ANGEEK ROM.
If anybody who sucessfully flashed Stock rom & then BB or Mazel 2 after Angeek, must come in front and give us the solution.
@pulley: buddy, as u r the OP, pls add the procesure in ur OP(after getting the solution) and give ur thread name as "Flashing stock rom after Angeek rom". Coz lots of people are flashing over angeek and facing lots of problem.
Asap answer will b appriciated.
Sent from my GT-I9103 using xda premium

kataria.vikesh said:
@pulley: buddy, as u r the OP, pls add the procesure in ur OP(after getting the solution) and give ur thread name as "Flashing stock rom after Angeek rom". Coz lots of people are flashing over angeek and facing lots of problem.
Asap answer will b appriciated.
Sent from my GT-I9103 using xda premium
Click to expand...
Click to collapse
Done :good:

pulley06 said:
Done :good:
Click to expand...
Click to collapse
Great buddy. I will add this in Angeek ROM'S OP.
Sent from my GT-I9103 using xda premium

I don't have a gb backup den what should I do???
Sent from my GT-I9103 using xda premium

Optional Method
on request of pulley06 posting this
I was facing same problem from yesterday, so i followed this
1. remove battery/SDcard/SIM
2. wait for 5 minutes
3. insert SIM and SD card and plug USB cable in phone and connect it with laptop/PC (DO NOT INSERT BATTERY)
4. wait for one minute and now insert battery (With USB cable connected)
5. switch on
6. flash stock ICS and reboot
5 flash CWM (I used 5.5 for BB ROM) and reboot
7 enter CWM
8 Mount/Unmount> click on Unmount/system again click same (so click two times)
9 now flash BB ROM and Reboot
10. Enter CWM and repeat step 8 and flash Sensation Theme. and reboot.

vishu1991 said:
I don't have a gb backup den what should I do???
Sent from my GT-I9103 using xda premium
Click to expand...
Click to collapse
I hope the above post helps you :thumbup:
Sent from my GT-I9103 using xda app-developers app

vishu1991 said:
I don't have a gb backup den what should I do???
Sent from my GT-I9103 using xda premium
Click to expand...
Click to collapse
try flashing Stock GB through Odin.

i created back up of both nordic and austian rom (also gb)
with ardadat kernel
just restore
wipe data/ cache
and flash roms
i have no issue,

Nordic rom flashing over angeek mod rom
Hey Buddies,
I did few R&D over Angeek ROM. As we are facing problem after Flashing NORDIC ROM over this One.
Here is the procedure:
If you Have any Back of ICS / GB then only apply these changes. Coz I have already did this.
Caution: Please take your Backup before then Try to Do below mentioned steps.
1) Requirements:
1.1) Must b having Ardatdat's eMMC erased Kernel i.e. V4.0 & higher.
1.2) ODIN V 3.07
1.3) Latest Kies Installed (for USB drivers)
1.4) Latest XXQL9 NORDIC ROM
1.5) CMW 6.0.1.1 for CMW flashing & CMW 6.0.1.1.tar for ODIN.
1.6) A PC..(of course):silly:
2) Flashing:
As per Suggestion by chandanbs, NORDIC ROM is almost come with Full in System Rom Partition.
So, here is few suggestion which was already suggested by our Great Mj.vikram buddy over this Thread & see Post no #8 there.
Hope, your ROM Partition is 619/620MB.
After Flashing above procedure, If you have flashed Ardatdat's Kernel first & have installed any ROM Specially ANGEEK ROM(coz having problem in that rom particularly as per users) Then Follow the Process:
2.1) Go to CMW Recovery MOD & Install Latest CMW 6.0.1.1
2.2) Wipe Data/Factory Reset.
2.3) Go to CMW recovery again & Just Restore you previous backup of any ROM.
2.4) Open ODIN 3.07(Right Click over Exe & select "Run As Administrator") & Follow the steps for flashing Stock ROM using this tutorial
2.5) After Booting just Flash CMW V6 using ODIN 3.07.
2.6) Don't Wipe Data / Factory Reset or Wipe cache / dalvik Cache. Just let it boot.
Now you have Successfully Flashed Nordic ROM over Angeek / Any other ROM.
Requesting OP to add this one also in his OP Post.

Vikesh.. looks good.. please add few steps as to how to make this nordic room rooted.. as you cant directly flash ardatdat kernel over it as it already full in system rom partition.. :silly:

This means if I don't have an earlier backup of ics/gb and i am on angeeks rom I can't flash any new rom...plz clarify....
Sent from my GT-I9103 using xda premium

[Q] How to revert back to stock DDLF2 from rooted state?

Hi,
I have rooted DDLF2 (using CF-ROOT). Now that I no more need root (stopped using an app that needed root), I need to get back to stock DDLF2.
I have already unrooted it using recovery mode > unroot.zip method.
All I need is 100% samsung stock DDLF2 on the phone now, without the cf-kernel, cf-recovery and apps that the rooting process brought in.
Please advise...
Thanks

Dude thats simple...
Just flash ddlf2 using odin and u are good to go !!
Sent from my GT-I9003

simratcs said:
Dude thats simple...
Just flash ddlf2 using odin and u are good to go !!
Sent from my GT-I9003
Click to expand...
Click to collapse
Yes, just clean flash and the root is gone
Sent from my GT-I9003 using Tapatalk 2

agnivo007 said:
Hi,
I have rooted DDLF2 (using CF-ROOT). Now that I no more need root (stopped using an app that needed root), I need to get back to stock DDLF2.
I have already unrooted it using recovery mode > unroot.zip method.
All I need is 100% samsung stock DDLF2 on the phone now, without the cf-kernel, cf-recovery and apps that the rooting process brought in.
Please advise...
Thanks
Click to expand...
Click to collapse
take the CR-ROOT zp file, open up with winrar, replace the file with DDLF2 normalboot.img, than flash with odin PDA. you will get back the stock kernel or maybe you will have boot looping, if not bootlooping, reboot the phone once, than factory reset.
try at your own risk.

chongns said:
take the CR-ROOT zp file, open up with winrar, replace the file with DDLF2 normalboot.img, than flash with odin PDA. you will get back the stock kernel or maybe you will have boot looping, if not bootlooping, reboot the phone once, than factory reset.
try at your own risk.
Click to expand...
Click to collapse
Dude i think he is a new member so dont tell him such stuff that is a bit confusing for a newbie...
Let him just clean flash ddlf2
Sent from my GT-I9003

flash xxkpe then ddlf2

karanmirchandani96 said:
flash xxkpe then ddlf2
Click to expand...
Click to collapse
Hi, can I flash xxkpe on CWM recovery mode and update to DDLF2 from kies?
Just wanted to know can stock ROMs can be flashed from CWM recovery, just like cROM.

No u have to flash them via Odin only.
sent from Samsung galaxy S i9003 Remics JB v3

Thanks for the Info!!!

THANKS!
Flashed via ODIN as PDA, did wipe, cache clean and now I'm set...

hi i flashed ddlf2 everything is working except my wifi is there any solution?

agnivo007 said:
Hi,
I have rooted DDLF2 (using CF-ROOT). Now that I no more need root (stopped using an app that needed root), I need to get back to stock DDLF2.
I have already unrooted it using recovery mode > unroot.zip method.
All I need is 100% samsung stock DDLF2 on the phone now, without the cf-kernel, cf-recovery and apps that the rooting process brought in.
Please advise...
Thanks
Click to expand...
Click to collapse
use the android development section and download the ddlf2 files then use odin to flash it

amsad said:
hi i flashed ddlf2 everything is working except my wifi is there any solution?
Click to expand...
Click to collapse
Maybe this happened because you didn't clean install so here are the steps:
Download XXKPE from here.
Flash XXKPE by following the XXKPE install instructions (the archive should contain odin3 v1.83 or v1.85 if not here is odin3 v1.85)
Download DDLF2 from here (DDMF1 is the latest value pack so it's smoother and with better battery life)
Install DDFL2 or DDMF1( recommended) by following the value pack instructions (use only odin3 v3.04)
that's it, enjoy your stock rom
if this helped you ...hit the thanks button pls

[Q] How to install CWM after using Mobile odin

I recently used Mobile Odin to flash DDLF2 and ticked the options of injecting EverRoot and SuperSU.. But now I don't have CWM installed and I don't have CWM based recovery so I cannot flash any ROMs. How do I install CWM??
Please help.

dude to use mobile odin first of all u need to be rooted...
so first flash any CF-ROOT via odin and the rock mobile odin !!

U have to use the pc odin to root your phone.. the file should be .tar and put it on PDA
Sent from my GT-I9300 using xda premium

Deathavenger22 said:
I recently used Mobile Odin to flash DDLF2 and ticked the options of injecting EverRoot and SuperSU.. But now I don't have CWM installed and I don't have CWM based recovery so I cannot flash any ROMs. How do I install CWM??
Please help.
Click to expand...
Click to collapse
Assuming you still have the mobile odin and ever root and superSU installed at phone.
you just copy the cr-root tar file to your sd card and install using mobile odin. just that easy.

Originally Posted by Deathavenger22
I recently used Mobile Odin to flash DDLF2 and ticked the options of injecting EverRoot and SuperSU.. But now I don't have CWM installed and I don't have CWM based recovery so I cannot flash any ROMs. How do I install CWM??
Please help.
chongns said:
Assuming you still have the mobile odin and ever root and superSU installed at phone.
you just copy the cr-root tar file to your sd card and install using mobile odin. just that easy.
Click to expand...
Click to collapse
in other words
download cf root ie., any thing like bam kernal 15 .5 or 6
http://forum.xda-developers.com/showthread.php?t=1355675
copy it in your sd card.
open mobile odin
flash kernel by navigating to the place where you have stored
fiash it
thats done.
it takes only one or two minutes.

SL 9003 keeps freezing

hi guys,
i have updated my brother's GT-9003 to GingerBread, i tried flashing I9003JPKP5 and freezes happen just after boot is completed. if phones goes to sleep it never wakes up (have to remove battery). i tried to flash I9003JPKPH after that and same issue is there. phones freezes after boot or sleep. did wipe data/cache before and after flash but no use, only solution was to go back to Froyo and then no more freezes.
any ideas?

- KPE FULL (do not forget the PIT) with Odin 1.85 only !!!
- LF2 (PDA only with Odin)
- CF Root LF2 (PDA only with Odin) or bam kernel
- Wipe data factory reset
Sent from my GT-I9003 using xda app-developers app

imjustafq said:
- KPE FULL (do not forget the PIT) with Odin 1.85 only !!!
- LF2 (PDA only with Odin)
- CF Root LF2 (PDA only with Odin) or bam kernel
- Wipe data factory reset
Sent from my GT-I9003 using xda app-developers app
Click to expand...
Click to collapse
thanks for the reply, I need to keep local (arabic support). how to proceed?
this is what i did earlier:
- JPKP5 FULL with PIT
- JPKPH PDA only
- Wipe data

Just xxkpe+pit nor either firmware
Sent from my GT-I9003 using xda premium

nolimitzz said:
thanks for the reply, I need to keep local (arabic support). how to proceed?
this is what i did earlier:
- JPKP5 FULL with PIT
- JPKPH PDA only
- Wipe data
Click to expand...
Click to collapse
Did you do a factory reset? Should do a wipe data/factory reset after upgrade firmware..JPKP5 has the following files..
PIT - latona_20100512.pit
Bootloader – APBOOT_I9003JPKP5_CL482273_REV08_user_low_ship.tar
PDA – CODE_I9003JPKP5_CL482273_REV08_user_low_ship.tar
Phone – MODEM_I9003JXKP3_REV_00_CL1040711.tar
CSC – I9003OJPKP6_CL491426_CSC.tar...should work..My base is XXKPQ(I do not include Bootloader), it has Arabic support..I don't know about XXKPE

wee2wee said:
Did you do a factory reset? Should do a wipe data/factory reset after upgrade firmware..JPKP5 has the following files..
PIT - latona_20100512.pit
Bootloader – APBOOT_I9003JPKP5_CL482273_REV08_user_low_ship.tar
PDA – CODE_I9003JPKP5_CL482273_REV08_user_low_ship.tar
Phone – MODEM_I9003JXKP3_REV_00_CL1040711.tar
CSC – I9003OJPKP6_CL491426_CSC.tar...should work..My base is XXKPQ(I do not include Bootloader), it has Arabic support..I don't know about XXKPE
Click to expand...
Click to collapse
yes i did, for some reason it still freezes, i flashed Froyo back, might be a hardware issue with the phone.

Mobile ODIN cannot perform EverRoot and cannot wipe

Mobile ODIN operation always ends with everroot after that it reboots before wiping data/cache/dalvik cache.
I used this on first time when upgrading my tab from ICS to JB, mobile odin did not wipe and did not perform everroot. Fortunately, there are no bootloops.
Because I was curious why is this happening, I tried again by downgrading back to ICS. It flashes all partitions except data, it ends with everroot and reboot (skipping wipe). The flashing process ends with samsung logo bootloop. Fortunately, I still can go to recovery mode to wipe user data. After rebooting to ICS, neither SuperSU nor Mobile ODIN was found in app drawer. And root is lost.
Is there anyone know why is this happening?
UPDATE :
Now the wipe is now working, I think sometimes it doesn't work. However EverRoot DOES NOT work at all! Opening SuperSU and it can't install the binary.
Software :
Mobile ODIN Pro v3.65
Mobile ODIN Flash kernel APK (eu.chainfire.mobileodin.flashkernel.p6200.v2)
Android 4.1.2 (P6200XXMD6/P6200XXMC3/P6200OLBMD5)
Sent from my GT-P6200 using xda app-developers app

I Think it may want you to flash the same firmware again. That may be the reason. Like sometimes we may want reflash the same firmware, we need not root again.

seking said:
I Think it may want you to flash the same firmware again. That may be the reason. Like sometimes we may want reflash the same firmware, we need not root again.
Click to expand...
Click to collapse
I have retried re-flashing ICS (4.1.2 to 4.0.4), I chose all partitions flashed except data, I enabled EverRoot, wipe data and cache, wipe dalvik cache.
Flashing successful but ends in Samsung logo bootloop, I tried to wipe data in recovery, and tab could boot successfully but it was unrooted.
So I can say that flashing using Mobile ODIN Pro (v3.65) on Galaxy Tab 7.0 Plus GT-P6200 cannot wipe data and cache (wipinh dalvik cache seems still working) and cannot inject root (EverRoot)
Sent from my GT-P6200 using xda app-developers app

I wonder how does EverRoot and wipe data actually works and why it doesn't work on all devices. Is anyone know ?
Sent from my GT-P6200 using xda app-developers app