I'm facing a weird problem. I can't flash stock rom via Odin. The phone is always stuck on the Samsung screen. Tried xxlq7/xxlq9. I'm on angeeks rom. Wanted to try the blueberry sensation rom.
So for that I tried flashing xxlq9 again as recommended and faced this issue.
EDIT [FIX]
As suggested by Kartik pat i was able to successfully flash stock rom over angeeks rom
I followed the following steps:
1. Take tb for all apps [angeeks rom]
2. Restore any gingerbread backup you might have from CWM. Boot your device.
3. Flash xxlq9 via Odinv3. Boot device
4. Flash cwm4. Boot device.
5. Flash ardatdat kernel v4.0 [ensures the erase bug issue is resolved]
6. Boot System
7. Reboot into recovery. Wipe data,cache,dalvik cache.
8. Boot system and tada
If you want to flash bb rom over this then:
1. Flash the bb rom v1. Reboot.
2. Flash the bug fix zip. Reboot.
3. Flash sensation mod
P.s. this method worked for me using the gb backup and cwmv4.
Hope this helps.
EDIT 2:
As posted by vikesh....
Hey Buddies,
I did few R&D over Angeek ROM. As we are facing problem after Flashing NORDIC ROM over this One.
Here is the procedure:
If you Have any Back of ICS / GB then only apply these changes. Coz I have already did this.
Caution: Please take your Backup before then Try to Do below mentioned steps.
1) Requirements:
1.1) Must b having Ardatdat's eMMC erased Kernel i.e. V4.0 & higher.
1.2) ODIN V 3.07
1.3) Latest Kies Installed (for USB drivers)
1.4) Latest XXQL9 NORDIC ROM
1.5) CMW 6.0.1.1 for CMW flashing & CMW 6.0.1.1.tar for ODIN.
1.6) A PC..(of course):silly:
2) Flashing:
As per Suggestion by chandanbs, NORDIC ROM is almost come with Full in System Rom Partition.
So, here is few suggestion which was already suggested by our Great Mj.vikram buddy over this Thread & see Post no #8 there.
Hope, your ROM Partition is 619/620MB.
After Flashing above procedure, If you have flashed Ardatdat's Kernel first & have installed any ROM Specially ANGEEK ROM(coz having problem in that rom particularly as per users) Then Follow the Process:
2.1) Go to CMW Recovery MOD & Install Latest CMW 6.0.1.1
2.2) Wipe Data/Factory Reset.
2.3) Go to CMW recovery again & Just Restore you previous backup of any ROM.
2.4) Open ODIN 3.07(Right Click over Exe & select "Run As Administrator") & Follow the steps for flashing Stock ROM using this tutorial
2.5) After Booting just Flash CMW V6 using ODIN 3.07.
2.6) Don't Wipe Data / Factory Reset or Wipe cache / dalvik Cache. Just let it boot.
Now you have Successfully Flashed Nordic ROM over Angeek / Any other ROM.
Sent from my GT-I9103 using xda app-developers app
Try to restore ur cwm backup of gb if u have and den flash ics
I did the same thing i was also using angeek's rom and now i m using BB
Can I restore my cwm backup over xxlq9?
Sent from my GT-I9103 using xda app-developers app
pulley06 said:
Can I restore my cwm backup over xxlq9?
Click to expand...
Click to collapse
yes you can and which ODIN version you are using for flashing better to flash using v3......
mj.vikram said:
yes you can and which ODIN version you are using for flashing better to flash using v3......
Click to expand...
Click to collapse
Mj i had similar issue...i want to taste mazel n was flashin ics stock rom..using odin 3.x but it stuck in mid way durin flashin...
Wat cld b d reason ?? Later i restored my cwm backup..
Sent from my GT-I9103 using Tapatalk 2
mj.vikram said:
yes you can and which ODIN version you are using for flashing better to flash using v3......
Click to expand...
Click to collapse
Yeah I was using v3
Okay so I wanted to use the bb rom...are these steps enough?
1. Take tb for all apps
2. Restore backup
3. Flash xxlq9 via Odin
4. Flash cwm
5. Flash ardatdat kernel
6. Wipe data
7. Wipe cache
8. Flash bb v1,fixes, sensation mod.
Sent from my GT-I9103 using xda app-developers app
vipul12389mehta said:
Mj i had similar issue...i want to taste mazel n was flashin ics stock rom..using odin 3.x but it stuck in mid way durin flashin...
Wat cld b d reason ?? Later i restored my cwm backup..
Click to expand...
Click to collapse
i am also not sure buddy i also faced this kind of issue once then i restored to GB and flashed it again, but i flashed Mazel on Leaked ICS so i thought it was the problem ......
pulley06 said:
Yeah I was using v3
Okay so I wanted to use the bb rom...are these steps enough?
1. Take tb for all apps
2. Restore backup
3. Flash xxlq9 via Odin
4. Flash cwm
5. Flash ardatdat kernel
6. Wipe data
7. Wipe cache
8. Flash bb v1,fixes, sensation mod.
Click to expand...
Click to collapse
yes buddy you are correct, you need to wipe all 3 ie data, cache & Dalvic cache..
But i feel its not mandatory to flash XXLQ9 because i use to flash on my Leaked ICS and it was working fine when i used it.....
i followed all the steps mentioned above...the phone booted to the home screen of xxlq9...flashed bb rom successfully as per cwm...but the phone is stuck on the samsung screen that comes after galaxy r appears
vipul12389mehta said:
Mj i had similar issue...i want to taste mazel n was flashin ics stock rom..using odin 3.x but it stuck in mid way durin flashin...
Wat cld b d reason ?? Later i restored my cwm backup..
Sent from my GT-I9103 using Tapatalk 2
Click to expand...
Click to collapse
It gets stuck for like 10-15 secs but later it flashes ROM properly,
@mj whats wrong to do it with V1.85?
@pulley I also faced same problem yesterday, but I think that time i did not mount/unmout system so I reflashed BB again by pressing two times mount>unmount (final would be unmount/system), so just press two times, still not booting then again wipe all 3 (cache,dalvik and data)
I think there is few points we should consider while flashing BB or MAZEL2 rom if u are on ANGEEK ROM.
If anybody who sucessfully flashed Stock rom & then BB or Mazel 2 after Angeek, must come in front and give us the solution.
@pulley: buddy, as u r the OP, pls add the procesure in ur OP(after getting the solution) and give ur thread name as "Flashing stock rom after Angeek rom". Coz lots of people are flashing over angeek and facing lots of problem.
Asap answer will b appriciated.
Sent from my GT-I9103 using xda premium
kataria.vikesh said:
@pulley: buddy, as u r the OP, pls add the procesure in ur OP(after getting the solution) and give ur thread name as "Flashing stock rom after Angeek rom". Coz lots of people are flashing over angeek and facing lots of problem.
Asap answer will b appriciated.
Sent from my GT-I9103 using xda premium
Click to expand...
Click to collapse
Done :good:
pulley06 said:
Done :good:
Click to expand...
Click to collapse
Great buddy. I will add this in Angeek ROM'S OP.
Sent from my GT-I9103 using xda premium
I don't have a gb backup den what should I do???
Sent from my GT-I9103 using xda premium
Optional Method
on request of pulley06 posting this
I was facing same problem from yesterday, so i followed this
1. remove battery/SDcard/SIM
2. wait for 5 minutes
3. insert SIM and SD card and plug USB cable in phone and connect it with laptop/PC (DO NOT INSERT BATTERY)
4. wait for one minute and now insert battery (With USB cable connected)
5. switch on
6. flash stock ICS and reboot
5 flash CWM (I used 5.5 for BB ROM) and reboot
7 enter CWM
8 Mount/Unmount> click on Unmount/system again click same (so click two times)
9 now flash BB ROM and Reboot
10. Enter CWM and repeat step 8 and flash Sensation Theme. and reboot.
vishu1991 said:
I don't have a gb backup den what should I do???
Sent from my GT-I9103 using xda premium
Click to expand...
Click to collapse
I hope the above post helps you :thumbup:
Sent from my GT-I9103 using xda app-developers app
vishu1991 said:
I don't have a gb backup den what should I do???
Sent from my GT-I9103 using xda premium
Click to expand...
Click to collapse
try flashing Stock GB through Odin.
i created back up of both nordic and austian rom (also gb)
with ardadat kernel
just restore
wipe data/ cache
and flash roms
i have no issue,
Nordic rom flashing over angeek mod rom
Hey Buddies,
I did few R&D over Angeek ROM. As we are facing problem after Flashing NORDIC ROM over this One.
Here is the procedure:
If you Have any Back of ICS / GB then only apply these changes. Coz I have already did this.
Caution: Please take your Backup before then Try to Do below mentioned steps.
1) Requirements:
1.1) Must b having Ardatdat's eMMC erased Kernel i.e. V4.0 & higher.
1.2) ODIN V 3.07
1.3) Latest Kies Installed (for USB drivers)
1.4) Latest XXQL9 NORDIC ROM
1.5) CMW 6.0.1.1 for CMW flashing & CMW 6.0.1.1.tar for ODIN.
1.6) A PC..(of course):silly:
2) Flashing:
As per Suggestion by chandanbs, NORDIC ROM is almost come with Full in System Rom Partition.
So, here is few suggestion which was already suggested by our Great Mj.vikram buddy over this Thread & see Post no #8 there.
Hope, your ROM Partition is 619/620MB.
After Flashing above procedure, If you have flashed Ardatdat's Kernel first & have installed any ROM Specially ANGEEK ROM(coz having problem in that rom particularly as per users) Then Follow the Process:
2.1) Go to CMW Recovery MOD & Install Latest CMW 6.0.1.1
2.2) Wipe Data/Factory Reset.
2.3) Go to CMW recovery again & Just Restore you previous backup of any ROM.
2.4) Open ODIN 3.07(Right Click over Exe & select "Run As Administrator") & Follow the steps for flashing Stock ROM using this tutorial
2.5) After Booting just Flash CMW V6 using ODIN 3.07.
2.6) Don't Wipe Data / Factory Reset or Wipe cache / dalvik Cache. Just let it boot.
Now you have Successfully Flashed Nordic ROM over Angeek / Any other ROM.
Requesting OP to add this one also in his OP Post.
Vikesh.. looks good.. please add few steps as to how to make this nordic room rooted.. as you cant directly flash ardatdat kernel over it as it already full in system rom partition.. :silly:
This means if I don't have an earlier backup of ics/gb and i am on angeeks rom I can't flash any new rom...plz clarify....
Sent from my GT-I9103 using xda premium
Related
i have stock rom 2.3.6 installed on my phone..
n i just flashed custom recovery from tj style.. wiped data n wiped cache
then i reboot bt my phone is nt starting now..its just keep rebooting again and again..plz help
you may have to reflash via oden ,i'm not sure
try to reflash your Stock 2.3.6 ROM via odin, and then flash tj_style's CWM via odin too
Syfer_Fever said:
try to reflash your Stock 2.3.6 ROM via odin, and then flash tj_style's CWM via odin too
Click to expand...
Click to collapse
hmmmm but the stock rom has rfs file system and so cwm can't be used on it
cwm can't use for Backup stock ROM
and if cwm can't installed in stock ROM how can we use Custom ROM? lol
lol i see
i have to install cwm using oden before using any custom rom thanks dude i'm new here =D
Dude what you have to do is paste any rom into root of your SD and flash via CWM wipe data and reboot it works it worked for me...
If u want to flash stock rom reflash the stock rom via Odin....
Press "thanks" if it helped u
Sent from my GT-S5670 using xda premium
andluv said:
Dude what you have to do is paste any rom into root of your SD and flash via CWM wipe data and reboot it works it worked for me...
If u want to flash stock rom reflash the stock rom via Odin....
Press "thanks" if it helped u
Sent from my GT-S5670 using xda premium
Click to expand...
Click to collapse
Thanks dude..
Day is exactly what I did n it worked 4 me:beer::beer::beer:
Sent from my GT-S5670 using XDA
vikas1038 said:
i have stock rom 2.3.6 installed on my phone..
n i just flashed custom recovery from tj style.. wiped data n wiped cache
then i reboot bt my phone is nt starting now..its just keep rebooting again and again..plz help
Click to expand...
Click to collapse
I had this prob yesterdqy,,
You need to flash the original stock rom before you can flash another rom..
Flash the "S5670XXKPI" stock with ODIN,, after that, your SGFit will be fine... You can flash other rom qfter you flash the original rom..
Good Luck!..
Sent from my GT-S5670 using xda premium
I installed stock ROM S5670XWKTI. After, I installed CWM. Via CWM I can install customize ROM, but I do not want a custom ROM than the stock ROM. All custom ROM have bugs. For me the most stable stock ROM. For example. for me on the CWM not work mount / system, cash, etc.
Yesterday I tried on stock ROM install 14 toggles Galaxy Fit , but before that the CWM has to go to mount / system that does not work for me.
You cant mount system via cwm on stock rom because to mount system, it must be ext4 witch is not in stock rom.
Sent from my GT-S5670 using Tapatalk
Dude, the CWM by Tj style is for the ext4 system... and the stock rom is RFS..
You should flash the CWM by Vish coz it support the RFS system , not the Tj style vers..
Cmiiw..
Sent from my GT-S5670 using xda premium
you guys CAN install CWM v5 by tj_style in stock ROM, but it CANNOT backup stock ROM wich is RFS, if u on stock ROM and then install cwm v5 via odin and u can directly flash custom ROM via CWM
CWM by Vish coz link for download
pito2204 said:
CWM by Vish coz link for download
Click to expand...
Click to collapse
Link:
http://forum.xda-developers.com/sho...ighlight=clockworkmod+recovery+for+galaxy+fit
http://forum.xda-developers.com/showpost.php?p=24719114
I use CWM_rfs.zip that posting by pratyush.creed and it works on my Stock ROM S5670JPKT4.
googler78 said:
http://forum.xda-developers.com/showpost.php?p=24719114
I use CWM_rfs.zip that posting by pratyush.creed and it works on my Stock ROM S5670JPKT4.
Click to expand...
Click to collapse
How you used. With Odin or ...?
Please post all questions in the Q&A section.
Thread Moved
Hay guys. Please help me. Some days ago i flashed my phone with 4.0.4 by Kies and everything was ok but after some days using ICS i was totally disappointed from it and decide to back my perfectly working 2.3.6 (Ausrian rom) with which i was before. But now after flashing it with Odin my phone stays on the first screen (Choose lang.) and than some messages start to shows up saying some google services can't start and after some seconds the phone restarts and all repeats again. PLEASE HELP if it's possible! Thanks in advance!!
may be flashing problem/Download file may be having some problem, Try to download the Stock ROM and Flash it again with ODIN and check...
mj.vikram said:
may be flashing problem/Download file may be having some problem, Try to download the Stock ROM and Flash it again with ODIN and check...
Click to expand...
Click to collapse
Yes, i used the original Austria rom (3 Hutchinson) which i downloaded from sammobbile's stock rom section...
Marinski79 said:
Yes, i used the original Austria rom (3 Hutchinson) which i downloaded from sammobbile's stock rom section...
Click to expand...
Click to collapse
Check if you are able to Boot in to Recovery Mode, if possible then Wipe Data and reboot the system..
i m using frankstainmod ICS , can i flash cm 7.2 using cwm???
TUSHARKATE007 said:
i m using frankstainmod ICS , can i flash cm 7.2 using cwm???
Click to expand...
Click to collapse
Better you downgrade to GB and then flash CM 7 on it....
mj.vikram said:
Better you downgrade to GB and then flash CM 7 on it....
Click to expand...
Click to collapse
thanks
go to recovery mode
do a factory reset
cache wipe
You do not need to flash cwm.
use gb original recovery.
Sent from my GT-I9103 using xda app-developers app
---------- Post added at 12:56 AM ---------- Previous post was at 12:45 AM ----------
Or you can flash cwm.
Then u can recovery from the backup.
For my experience, I encouter the same things as u (downgrade to gb, can't bpot).
What I do is listed below:
1. power off phone.
2. power on phone and press home+volume up to enter one mode (I don't how to name it. Also, the mode is like cwm, but only few functon)
3. select factory reset. select cache……
4. then u can reboot to a clean gb systen
5. flash cwm via odin and recovery it to the backup I made before flash ics.
Sent from my GT-I9103 using xda app-developers app
mj.vikram said:
Check if you are able to Boot in to Recovery Mode, if possible then Wipe Data and reboot the system..
Click to expand...
Click to collapse
Yes, this worked! Thanks a lot dude!!! My biggest problem was that i didn't made a backup before flash to ICS... And i wasn't rooted my phone and installed CWM until now The second problem was that i wasn't able to start CWM after installing it. I tried 10 times maybe and when i was going to give up i get lucky and it starts (ufff.. Than i wipe data/cash and even did factory reset and after that my phone reborn DD
Thanks again for all answers and help guys
Marinski79 said:
Yes, this worked! Thanks a lot dude!!! My biggest problem was that i didn't made a backup before flash to ICS... And i wasn't rooted my phone and installed CWM until now The second problem was that i wasn't able to start CWM after installing it. I tried 10 times maybe and when i was going to give up i get lucky and it starts (ufff.. Than i wipe data/cash and even did factory reset and after that my phone reborn DD
Thanks again for all answers and help guys
Click to expand...
Click to collapse
Happy to help ,....
I just want to ask how to flash cm10 alpha 4 and other cm10 alpha 4 rom. Is it the same step to flash alpha 3??
Sent from my GT-I9003 using xda premium
1.cf root
2.wipe data,cache,dalvik cache
3.flash cm10 a4
Don't reboot
4.flash gapps
5.Reboot
6.wait until 5 minutes
7.final reboot
Sent from my GT-I9003 using xda premium
Thanks
Sent from my GT-I9003 using xda premium
problem while flashing CM10 Alpha 4
MR.Volkf said:
1.cf root
2.wipe data,cache,dalvik cache
3.flash cm10 a4
Don't reboot
4.flash gapps
5.Reboot
6.wait until 5 minutes
7.final reboot
Sent from my GT-I9003 using xda premium
Click to expand...
Click to collapse
while the CM10 Alpha4 rom package (by dhiru1602) is installing that is during step 3 according to the steps mentioned above , the phone suddenly reboots into recovery again n then the installation process stops......giving a bunch of 5 to 6 errors on the screen..errors like "cannot mount".....pls help.....thank you....
fraaz7777 said:
while the CM10 Alpha4 rom package (by dhiru1602) is installing that is during step 3 according to the steps mentioned above , the phone suddenly reboots into recovery again n then the installation process stops......giving a bunch of 5 to 6 errors on the screen..errors like "cannot mount".....pls help.....thank you....
Click to expand...
Click to collapse
Flash CM10 Alpha4 again(it's normal ...need to flash twice when install Alpha4 first time)
wee2wee said:
Flash CM10 Alpha4 again(it's normal ...need to flash twice when install Alpha4 first time)
Click to expand...
Click to collapse
thanx for the advice.....will try as u said...n let u know if it worked this time...
fraaz7777 said:
while the CM10 Alpha4 rom package (by dhiru1602) is installing that is during step 3 according to the steps mentioned above , the phone suddenly reboots into recovery again n then the installation process stops......giving a bunch of 5 to 6 errors on the screen..errors like "cannot mount".....pls help.....thank you....
Click to expand...
Click to collapse
The same happened with me as well. Don't worry, just flash the CM10 Alpha4 rom package (by dhiru1602) again. Do give review about your battery backup.
Same instrcutions too flash from alpha 3?
felaipes said:
Same instrcutions too flash from alpha 3?
Click to expand...
Click to collapse
ya....same instructions almost
Stock ROM
1. Flash CWM Compatible Kernel (CF ROOT)
2. Reboot to Recovery.
3. Wipe Data / Factory Reset.
4. Select the ROM zip from your SD Card and flash.
5. Go to Advanced -> Reboot Recovery.
6. Mounts and Storage -> Format dbdata
7. Flash Google Apps.
8. Reboot
Any other AOSP ROM (CM7/MIUI/CM9)
1. Reboot to Recovery.
3. Wipe Data / Factory Reset.
4. Select the ROM zip from your SD Card and flash.
5. Go to Advanced -> Reboot Recovery.
6. Mounts and Storage -> Format dbdata
7. Flash Google Apps.
8. Reboot
Upgrading from previous versions of CM10
1. Reboot to Recovery.
2. Select the ROM zip from your SD Card and flash.
3. Flash Google Apps.
4. Reboot
---------- Post added at 05:20 PM ---------- Previous post was at 05:16 PM ----------
wee2wee said:
Flash CM10 Alpha4 again(it's normal ...need to flash twice when install Alpha4 first time)
Click to expand...
Click to collapse
thanx.....CM10 alpha4 now works......
---------- Post added at 05:25 PM ---------- Previous post was at 05:20 PM ----------
samgsl said:
The same happened with me as well. Don't worry, just flash the CM10 Alpha4 rom package (by dhiru1602) again. Do give review about your battery backup.
Click to expand...
Click to collapse
ya....it worked after re flashing.....battery is almost the same as CM10 alpha3....well I mostly use Wifi.....for 4 hrs around everyday n some texts n calls.....some videos for bout 4 hrs on MXplayer......all of that n at the end of the day battery is around 10% remaining....
flash remics
did any body know how 2 flash remiics v3.1
glad07 said:
did any body know how 2 flash remiics v3.1
Click to expand...
Click to collapse
--Flash CM10A4 first
--Do Not Reset/Wipe
--Flash Remics v3.1
--Flash GAPPS
--reboot
The steps for CM10 alpha 4 installation r mentioned above by me.......press the thank button (+1) if I helped. ....
Quick question, good or best kernel for alpha 3?
I dont think i`ll flash alpha 4, seems like it has random problems, and just wanted to flash it for
The improvements that adi kernel brought
felaipes said:
Quick question, good or best kernel for alpha 3?
I dont think i`ll flash alpha 4, seems like it has random problems, and just wanted to flash it for
The improvements that adi kernel brought
Click to expand...
Click to collapse
Alpha 4 is an improved version over Alpha3(just need to go back to pit when you want to switch roms other than Alpha4)..I'm currently on "Dhiru's CyanogenMod 10 for Samsung Galaxy SL - Alpha 4 - Farewell Release" with "Crackerizer's CrackerizerKernel - Final" plus "loSconosciuto's Optimized Samsung battery driver"..so far so good, better battery as well
does anybody know how to get back to stock I9003DDLF2 (2.3.6)
i'm currently on CM10 Alpha4 by Dhiru 1602......pls help with proper instructions......n how to use Odin for that.....
4 file firmware like xxkpe then flash to ddlf2
Sent from my GT-I9003 using xda app-developers app
fraaz7777 said:
does anybody know how to get back to stock I9003DDLF2 (2.3.6)
i'm currently on CM10 Alpha4 by Dhiru 1602......pls help with proper instructions......n how to use Odin for that.....
Click to expand...
Click to collapse
why do u want to go back to stock?
share your experience with alpha 4, i love alpha 3, its great, but the battery life could be better
BassBlaster said:
4 file firmware like xxkpe then flash to ddlf2
Sent from my GT-I9003 using xda app-developers app
Click to expand...
Click to collapse
I believe you need to flash 2 files only to back to kpe
1. Kpe (select in pda only in Odin1.83 ) + 2. Pit , no bootloader file is needed .
somebody correct me if i am wrong , but i successfully reflashed from kpe to a4 to jellybam
( Read Dhiru's A4 post , quote "
1. This ROM will wipe data due to different partitioning. The device would reboot while flashing and resume again.
2. Once on this ROM, the most effective way of going back to any other ROM would be to repartition from Odin.
3. While converting the filesystem, your efs that has your IMEI is backed up to /emmc/backup/efs. Keep a backup on your PC just in case.
4. Incase if you don't get a network signal, check if your IMEI and Baseband are proper. If not, go back to stock and try again.
5. Do NOT use Odin to flash Modems. Due to different partitions, Odin will screw up your existing MTD setup. " )
or Lola's real story (our great contributor porting roms for us)
http://forum.xda-developers.com/showthread.php?t=2048672
glad07 said:
did any body know how 2 flash remiics v3.1
Click to expand...
Click to collapse
1. Do Nandroid backup
2. Do a factory reset/data wipe.
3. Install the ROM.
4. Install Gapps for JB.
5. Reboot (automatically).
6. Wait till full boot of your phone.
7.Enjoy
Hi....
I am not from here.... Am from dhd section...
I got a galaxy R......
So I would have some questions regarding flashing and ROMs....
1. Can someone suggest some stable ics ROMs? ? Most of the ics ROMs are inactive now..... So I can't choose any...
2. Can I install 4 ext recovery?
It's simple and touch recovery too...
3. If I can't change cmw recovery what are things I should format before flashing a rom.... And where can I find the options I mean under which category in recovery...
All I see is factory reset and format cache...
Thanks in advance...
Rk.....
Sent From The Future.....
rohithksaj said:
Hi....
1. Can someone suggest some stable ics ROMs? ? Most of the ics ROMs are inactive now..... So I can't choose any...
Click to expand...
Click to collapse
Flash [ROM] [4.0.4] [ZCLPD] Angeeks_I9103+A6900_Lv5_4.0.4 ROM..Most stable ICS ROM
2. Can I install 4 ext recovery?
It's simple and touch recovery too...
Click to expand...
Click to collapse
Yes. [i9103][CWM Advanced Edition] PhilZ Touch is recommended.
3. If I can't change cmw recovery what are things I should format before flashing a rom.... And where can I find the options I mean under which category in recovery...
All I see is factory reset and format cache...
Click to expand...
Click to collapse
Stock recovery doesnt come up with more options.
your need to flash any other recovery to install ROMs.
Visit this link for guidance..
Nikhil said:
Flash [ROM] [4.0.4] [ZCLPD] Angeeks_I9103+A6900_Lv5_4.0.4 ROM..Most stable ICS ROM
Yes. [i9103][CWM Advanced Edition] PhilZ Touch is recommended.
Stock recovery doesnt come up with more options.
your need to flash any other recovery to install ROMs.
Visit this link for guidance..
Click to expand...
Click to collapse
thanks ...one more doubt...
am on jellybeer now.....
so all i have to do is wipe and flash right ???
what all i have to wipe ????
rohithksaj said:
thanks ...one more doubt...
am on jellybeer now.....
so all i have to do is wipe and flash right ???
what all i have to wipe ????
Click to expand...
Click to collapse
yes, you need to wipe all things first (i.e. data,system & Caches) & Then flash ICS Stock ROM first coz of stability issues.
Disturbed™ said:
yes, you need to wipe all things first (i.e. data,system & Caches) & Then flash ICS Stock ROM first coz of stability issues.
Click to expand...
Click to collapse
Please give me the link to the stock...sorry I can't find in development section.......
Thanks a lot for the reply..
Sent from my GT-I9103 using xda app-developers app
rohithksaj said:
Please give me the link to the stock...sorry I can't find in development section.......
Thanks a lot for the reply..
Click to expand...
Click to collapse
Here you go..
2nd Post in [FIRMWARE] Stock Samsung Firmwares for Galaxy R
Nikhil said:
Here you go..
2nd Post in [FIRMWARE] Stock Samsung Firmwares for Galaxy R
Click to expand...
Click to collapse
Ok now all I have to do is wipe everything. Flash stock. Wipe everything flash the rom.... Right?
Sent from my GT-I9103 using xda app-developers app
rohithksaj said:
Ok now all I have to do is wipe everything. Flash stock. Wipe everything flash the rom.... Right?
Sent from my GT-I9103 using xda app-developers app
Click to expand...
Click to collapse
yes,
follow these steps.
0. copy zip file of Rom, Gapps(if required by rom), Ardatdat's kernel into your sdcard
1. wipe data/factory reset(along with dalvik cache)
2. flash stock firmware using odin (probably you'll experience boot loop)
3. flash CWM using odin
4. flash Ardatdat's kernel
5. perform factory reset(along with dalvik cache)
6. flash rom and gapps
Done..!
Nikhil said:
yes,
follow these steps.
0. copy zip file of Rom, Gapps(if required by rom), Ardatdat's kernel into your sdcard
1. wipe data/factory reset(along with dalvik cache)
2. flash stock firmware using odin (probably you'll experience boot loop)
3. flash CWM using odin
4. flash Ardatdat's kernel
5. perform factory reset(along with dalvik cache)
6. flash rom and gapps
Done..!
Click to expand...
Click to collapse
ok....thanks......
what happens if i skip the flashing stock step...i mean if i flash directly from jellybeer to the frankenstains mod by only doing factory reset and wiping caches ?????
And wiping caches and factory reset will do everything? Don't we have to wipe system and other things.?
And I don't like touch wiz... So can u please suggest a stable ics rom that runs without touch wiz?
I checked cyanogen... But no stable rc releases for this device.....
Thanks in advance...
rohithksaj said:
what happens if i skip the flashing stock step...i mean if i flash directly from jellybeer to the frankenstains mod by only doing factory reset and wiping caches ?????
And I don't like touch wiz... So can u please suggest a stable ics rom that runs without touch wiz?
I checked cyanogen... But no stable rc releases for this device.....
Click to expand...
Click to collapse
Yes, above steps are just to be on safe side. You can install frankenstains mod after factory reset and wiping dalvik caches and skip mentioned step..
I thought you wanted stock ics.
AFAIK there isnt any stable custom ics rom. for stable rom you need to adjust with touchwiz only.
You can always install a custom launcher, like Nova or Apex which give a pure AOSP feel.
Nikhil said:
Yes, above steps are just to be on safe side. You can install frankenstains mod after factory reset and wiping dalvik caches and skip mentioned step..
I thought you wanted stock ics.
AFAIK there isnt any stable custom ics rom. for stable rom you need to adjust with touchwiz only.
Click to expand...
Click to collapse
ok....so this is what i am going to do as you said...
full wipe....
Install stock ics using odin....
Flash CWM using odin
Download the ZIp
Flash it using CWM.
isnt it ???
i understood how to flash the rom via odin but not recovery...
tell me how......
Adam77Root said:
You can always install a custom launcher, like Nova or Apex which give a pure AOSP feel.
Click to expand...
Click to collapse
i know...but it will make 2 launchers ....Touch wiz and the Apex....it irritates me a bit....
rohithksaj said:
ok....so this is what i am going to do as you said...
full wipe....
Install stock ics using odin....
Flash CWM using odin
Download the ZIp
Flash it using CWM.
isnt it ???
Click to expand...
Click to collapse
not exactly, first you need to download the zip file of ardatdat kernel and custom rom you want to flash and keep it into sdcard before performing any steps as mentioned 0th step in this post and then flash stock ics
i understood how to flash the rom via odin but not recovery...
tell me how......
Click to expand...
Click to collapse
after flashing CWM (say v4.0.0.2) you will get an option "install zip from sdcard" in recovery mode(hope you know the key combination to enter into recovery mode) click on it and browse to the directory in which you kept kernel and rom
click on zip file of kernel and flash it
same way install rom.
hope you are clear now..
i know...but it will make 2 launchers ....Touch wiz and the Apex....it irritates me a bit....
Click to expand...
Click to collapse
you can set any launcher to default, touchwiz launcher wont interrupt again!
Nikhil said:
not exactly, first you need to download the zip file of ardatdat kernel and custom rom you want to flash and keep it into sdcard before performing any steps as mentioned 0th step in this post and then flash stock ics
after flashing CWM (say v4.0.0.2) you will get an option "install zip from sdcard" in recovery mode(hope you know the key combination to enter into recovery mode) click on it and browse to the directory in which you kept kernel and rom
click on zip file of kernel and flash it
same way install rom.
hope you are clear now..
you can set any launcher to default, touchwiz launcher wont interrupt again!
Click to expand...
Click to collapse
one more problem
i installed [ROM] [4.0.4] [ZCLPD] Angeeks_I9103+A6900_Lv5_4.0.4 ROM
but its chinese....
how to change the language ??
rohithksaj said:
one more problem
i installed [ROM] [4.0.4] [ZCLPD] Angeeks_I9103+A6900_Lv5_4.0.4 ROM
but its chinese....
how to change the language ??
Click to expand...
Click to collapse
Settings -> Language & Inputs -> change it to English (Just go by the icons)....
rohithksaj said:
one more problem
i installed [ROM] [4.0.4] [ZCLPD] Angeeks_I9103+A6900_Lv5_4.0.4 ROM
but its chinese....
how to change the language ??
Click to expand...
Click to collapse
Follow the icon of Language and Input and click on language, select English then..
Done....
Anyway to remove the Chinese comment while making the call?
Sent from my GT-I9103 using xda app-developers app
rohithksaj said:
Done....
Anyway to remove the Chinese comment while making the call?
Sent from my GT-I9103 using xda app-developers app
Click to expand...
Click to collapse
Delete the CC app.
Adam77Root said:
Delete the CC app.
Click to expand...
Click to collapse
Done... Everything is going nice and easy...
Thanks all for your support and replies......
:thumbup::thumbup::thumbup:
Sent from the future........
Hi Guys
Im newer to this
I rooted my galaxy fit and then with the help of ROM manager I accessed CWM , then I tried to install custom ROM ,,, after rebooting phone stuck with white text android
Please simebody help me solve this
Sent from my GT-P3100 using xda app-developers app
Wipe data/reset
Wipe dalvik cache
Wipe cache
goto mounts & storage and format system
Flash the rom again
Wipe data
Reboot
Harpratap said:
Wipe data/reset
Wipe dalvik cache
Wipe cache
goto mounts & storage and format system
Flash the rom again
Wipe data
Reboot
Click to expand...
Click to collapse
I did like u said
But no luck
Its still showing white android text in boot screen
Im able to go to download mod and recovery mod but I dont know whats happening ....
Sent from my GT-P3100 using xda app-developers app
glsnjoseph said:
I did like u said
But no luck
Its still showing white android text in boot screen
Im able to go to download mod and recovery mod but I dont know whats happening ....
Sent from my GT-P3100 using xda app-developers app
Click to expand...
Click to collapse
Have patience,wait for 10-15 minutes.
First of all, you shouldn't have used Rom manager. It bricks our device
Read the guide in the top of general section and install a proper recovery from odin.
Maybe the zip you have downloaded is corrupted. So download it again and try.
Make sure you are on official gingerbread(2.3.x) and not froyo(2.2)
If none of this works,there is something seriously wrong with your device.
But don't worry,you can flash stock via odin and revert back to factory state.
Harpratap said:
Have patience,wait for 10-15 minutes.
First of all, you shouldn't have used Rom manager. It bricks our device
Read the guide in the top of general section and install a proper recovery from odin.
Maybe the zip you have downloaded is corrupted. So download it again and try.
Make sure you are on official gingerbread(2.3.x) and not froyo(2.2)
If none of this works,there is something seriously wrong with your device.
But don't worry,you can flash stock via odin and revert back to factory state.
Click to expand...
Click to collapse
First of all let me thankyou for support
I have tried 2-3ROMs but none of them works for me...
I searched a lot to find how to flash ROM via odin but unfortunately I didnt find anyn useful thread.
Can u send a link of odin flashing method ,
Sent from my GT-P3100 using xda app-developers app
glsnjoseph said:
First of all let me thankyou for support
I have tried 2-3ROMs but none of them works for me...
I searched a lot to find how to flash ROM via odin but unfortunately I didnt find anyn useful thread.
Can u send a link of odin flashing method ,
Sent from my GT-P3100 using xda app-developers app
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1606380 -All in one guide (read it thoroughly)
^flashing stock rom
^flashing CWM
And try Jana rom,official cm7, minicm7 at first because they boot very fast
And you cannot flash roms via odin. Odin is only for flashing stock firmware and recovery
I read that with 4 file package we can flash ROM (Official ) via odin,
In my case do I need to flash official firmware and then try Custom ROM or not
Kindly send a link to download 4 file package of stock firware
Unable to download from samfirmware.com
Sent from my GT-P3100 using xda app-developers app
You can download sock firmware from SAMMOBILE site. It is an open source website where you can download all samsung phone's official stock firmware.
Hit thanks if I help
Sent from cooperve.
glsnjoseph said:
I read that with 4 file package we can flash ROM (Official ) via odin,
In my case do I need to flash official firmware and then try Custom ROM or not
Kindly send a link to download 4 file package of stock firware
Unable to download from samfirmware.com
Sent from my GT-P3100 using xda app-developers app
Click to expand...
Click to collapse
Link firmware with 4 files:
http://www.hotfile.com/dl/168101698/7eed3f5/S5670XWKTI_S5670DBTKT1_DBT.zip.html
The right click on ODIN and this:
Thanxs
I did iy with stock firmware downloaded from samfirmware.com
Now Im on syock firmware
Tried to install custom ROMS, but no luck still same problem android white text......
Sent from my GT-P3100 using xda app-developers app
glsnjoseph said:
Thanxs
I did iy with stock firmware downloaded from samfirmware.com
Now Im on syock firmware
Tried to install custom ROMS, but no luck still same problem android white text......
Sent from my GT-P3100 using xda app-developers app
Click to expand...
Click to collapse
Not say thanx hit thanx button.
Hit thanks if I help
Sent from cooperve.
glsnjoseph said:
Thanxs
I did iy with stock firmware downloaded from samfirmware.com
Now Im on syock firmware
Tried to install custom ROMS, but no luck still same problem android white text......
Sent from my GT-P3100 using xda app-developers app
Click to expand...
Click to collapse
Which customize ROM?
For customize ROM you need with ODIN instal Clockwork Mod Recovery (CWM).
http://forum.xda-developers.com/showthread.php?t=1339640
Now you can install custom ROM. Go in CWM and go on wipe data reset, wipe cashe partition in Advanced wipe dalvik cashe. Install ROM and again go on wipe data reset, wipe cashe partition and in Advanced, go on wipe dalvik cashe. Reboot phone. It need wait about 5 minutes for system up.
ZmisiS said:
Which customize ROM?
For customize ROM you need with ODIN instal Clockwork Mod Recovery (CWM).
http://forum.xda-developers.com/showthread.php?t=1339640
Now you can install custom ROM. Go in CWM and go on wipe data reset, wipe cashe partition in Advanced wipe dalvik cashe. Install ROM and again go on wipe data reset, wipe cashe partition and in Advanced, go on wipe dalvik cashe. Reboot phone. It need wait about 5 minutes for system up.
Click to expand...
Click to collapse
Dude I tried like that only , installed CWM with odin
But I have no idea whats wrong with my phone
I tried Jellybread and jana ROM but after flashing JanaROM its showed JanaROM boot image but nothing happened..
Sent from my GT-P3100 using xda app-developers app
glsnjoseph said:
Dude I tried like that only , installed CWM with odin
But I have no idea whats wrong with my phone
I tried Jellybread and jana ROM but after flashing JanaROM its showed JanaROM boot image but nothing happened..
Sent from my GT-P3100 using xda app-developers app
Click to expand...
Click to collapse
I don't know because I not used Jellybread, and not I used Jana ROM. I used CM10.1.4 from here:
http://jenkins.androidarmv6.org/job/android/457/
glsnjoseph said:
Dude I tried like that only , installed CWM with odin
But I have no idea whats wrong with my phone
I tried Jellybread and jana ROM but after flashing JanaROM its showed JanaROM boot image but nothing happened..
Sent from my GT-P3100 using xda app-developers app
Click to expand...
Click to collapse
When u are flashing any custom rom over the stock rom for the 1st time then u *should* necessarily wipe /system otherwise you'll get hanged up forever on that android-text/boot-up screen.
Galaxy_Rohit said:
When u are flashing any custom rom over the stock rom for the 1st time then u *should* necessarily wipe /system otherwise you'll get hanged up forever on that android-text/boot-up screen.
Click to expand...
Click to collapse
Actually I tried all the way dude
Googled a lot to find a solution but didnt find anything useful.
I tried to flash CM 10.1 but it shows booting but nothing else..
Only boot image ,,,,,,
But Im not ready to give up
Here I will explain the whole thing I did
1.I rooted my phone with help of update zip
2.I connected phone to computer in download mode and flashed CWM recovery via odin,, in that I selected ops tag and then one package with cwm.
3.after flashing CWM via odin , I entered into CWM mode by pressing Ok button +power on button.
4.I wiped data, cache, dalvik cache, formatted system
5.Install zip from sd card and selected my Custom ROM
6.AGAIN Wiped data, cache, , dalvikcache
7.Rebooted
Then It stucks in boot image or blank screen and sometimes in white android text...
Hope somebody can help me now
Sent from my GT-P3100 using xda app-developers app
glsnjoseph said:
Actually I tried all the way dude
Googled a lot to find a solution but didnt find anything useful.
I tried to flash CM 10.1 but it shows booting but nothing else..
Only boot image ,,,,,,
But Im not ready to give up
Here I will explain the whole thing I did
1.I rooted my phone with help of update zip
2.I connected phone to computer in download mode and flashed CWM recovery via odin,, in that I selected ops tag and then one package with cwm.
3.after flashing CWM via odin , I entered into CWM mode by pressing Ok button +power on button.
4.I wiped data, cache, dalvik cache, formatted system
5.Install zip from sd card and selected my Custom ROM
6.AGAIN Wiped data, cache, , dalvikcache
7.Rebooted
Then It stucks in boot image or blank screen and sometimes in white android text...
Hope somebody can help me now
Sent from my GT-P3100 using xda app-developers app
Click to expand...
Click to collapse
Stock ROM work on your phone?
Bro! Goto "mounts & storage" & select "format /system"...(if u haven't done yet). Then try flashing custom rom. & always use cwm recovery by tjstyles v5.0.2.7
Let's hope for the best...:thumbup:
Galaxy_Rohit said:
Bro! Goto "mounts & storage" & select "format /system"...(if u haven't done yet). Then try flashing custom rom. & always use cwm recovery by tjstyles v5.0.2.7
Let's hope for the best...:thumbup:
Click to expand...
Click to collapse
Ya I have done that too
Formatted system from mounts and storage
Stock ROM works for me
Im on CWM 5.0.2.7
Sent from my GT-P3100 using xda app-developers app
glsnjoseph said:
Ya I have done that too
Formatted system from mounts and storage
Stock ROM works for me
Im on CWM 5.0.2.7
Sent from my GT-P3100 using xda app-developers app
Click to expand...
Click to collapse
Do this straight away:-
1. Flash Froyo 2.2.1(4 package) of ur country.
2. Then flash Gingerbread 2.3.6(one package) of ur country.
3. Then flash cwm via Odin.
4. Flash the custom rom thereafter.
Since it seems a bit complex issue, u need to try this to ensure zero errors.:sly: Btw u can try above steps in ur spare time.
As for me, I always try all methods that I know b4 concluding anything.