Database Info

HELP after downgrade from ICS to GB my phone doesn't start!

Hay guys. Please help me. Some days ago i flashed my phone with 4.0.4 by Kies and everything was ok but after some days using ICS i was totally disappointed from it and decide to back my perfectly working 2.3.6 (Ausrian rom) with which i was before. But now after flashing it with Odin my phone stays on the first screen (Choose lang.) and than some messages start to shows up saying some google services can't start and after some seconds the phone restarts and all repeats again. PLEASE HELP if it's possible! Thanks in advance!!

may be flashing problem/Download file may be having some problem, Try to download the Stock ROM and Flash it again with ODIN and check...

mj.vikram said:
may be flashing problem/Download file may be having some problem, Try to download the Stock ROM and Flash it again with ODIN and check...
Click to expand...
Click to collapse
Yes, i used the original Austria rom (3 Hutchinson) which i downloaded from sammobbile's stock rom section...

Marinski79 said:
Yes, i used the original Austria rom (3 Hutchinson) which i downloaded from sammobbile's stock rom section...
Click to expand...
Click to collapse
Check if you are able to Boot in to Recovery Mode, if possible then Wipe Data and reboot the system..

i m using frankstainmod ICS , can i flash cm 7.2 using cwm???

TUSHARKATE007 said:
i m using frankstainmod ICS , can i flash cm 7.2 using cwm???
Click to expand...
Click to collapse
Better you downgrade to GB and then flash CM 7 on it....

mj.vikram said:
Better you downgrade to GB and then flash CM 7 on it....
Click to expand...
Click to collapse
thanks

go to recovery mode
do a factory reset
cache wipe
You do not need to flash cwm.
use gb original recovery.
Sent from my GT-I9103 using xda app-developers app
---------- Post added at 12:56 AM ---------- Previous post was at 12:45 AM ----------
Or you can flash cwm.
Then u can recovery from the backup.
For my experience, I encouter the same things as u (downgrade to gb, can't bpot).
What I do is listed below:
1. power off phone.
2. power on phone and press home+volume up to enter one mode (I don't how to name it. Also, the mode is like cwm, but only few functon)
3. select factory reset. select cache……
4. then u can reboot to a clean gb systen
5. flash cwm via odin and recovery it to the backup I made before flash ics.
Sent from my GT-I9103 using xda app-developers app

mj.vikram said:
Check if you are able to Boot in to Recovery Mode, if possible then Wipe Data and reboot the system..
Click to expand...
Click to collapse
Yes, this worked! Thanks a lot dude!!! My biggest problem was that i didn't made a backup before flash to ICS... And i wasn't rooted my phone and installed CWM until now The second problem was that i wasn't able to start CWM after installing it. I tried 10 times maybe and when i was going to give up i get lucky and it starts (ufff.. Than i wipe data/cash and even did factory reset and after that my phone reborn DD
Thanks again for all answers and help guys

Marinski79 said:
Yes, this worked! Thanks a lot dude!!! My biggest problem was that i didn't made a backup before flash to ICS... And i wasn't rooted my phone and installed CWM until now The second problem was that i wasn't able to start CWM after installing it. I tried 10 times maybe and when i was going to give up i get lucky and it starts (ufff.. Than i wipe data/cash and even did factory reset and after that my phone reborn DD
Thanks again for all answers and help guys
Click to expand...
Click to collapse
Happy to help ,....

[FIX] Flashing Stock Rom/Custom ROM over Angeeks ROM

I'm facing a weird problem. I can't flash stock rom via Odin. The phone is always stuck on the Samsung screen. Tried xxlq7/xxlq9. I'm on angeeks rom. Wanted to try the blueberry sensation rom.
So for that I tried flashing xxlq9 again as recommended and faced this issue.
EDIT [FIX]
As suggested by Kartik pat i was able to successfully flash stock rom over angeeks rom
I followed the following steps:
1. Take tb for all apps [angeeks rom]
2. Restore any gingerbread backup you might have from CWM. Boot your device.
3. Flash xxlq9 via Odinv3. Boot device
4. Flash cwm4. Boot device.
5. Flash ardatdat kernel v4.0 [ensures the erase bug issue is resolved]
6. Boot System
7. Reboot into recovery. Wipe data,cache,dalvik cache.
8. Boot system and tada
If you want to flash bb rom over this then:
1. Flash the bb rom v1. Reboot.
2. Flash the bug fix zip. Reboot.
3. Flash sensation mod
P.s. this method worked for me using the gb backup and cwmv4.
Hope this helps.
EDIT 2:
As posted by vikesh....
Hey Buddies,
I did few R&D over Angeek ROM. As we are facing problem after Flashing NORDIC ROM over this One.
Here is the procedure:
If you Have any Back of ICS / GB then only apply these changes. Coz I have already did this.
Caution: Please take your Backup before then Try to Do below mentioned steps.
1) Requirements:
1.1) Must b having Ardatdat's eMMC erased Kernel i.e. V4.0 & higher.
1.2) ODIN V 3.07
1.3) Latest Kies Installed (for USB drivers)
1.4) Latest XXQL9 NORDIC ROM
1.5) CMW 6.0.1.1 for CMW flashing & CMW 6.0.1.1.tar for ODIN.
1.6) A PC..(of course):silly:
2) Flashing:
As per Suggestion by chandanbs, NORDIC ROM is almost come with Full in System Rom Partition.
So, here is few suggestion which was already suggested by our Great Mj.vikram buddy over this Thread & see Post no #8 there.
Hope, your ROM Partition is 619/620MB.
After Flashing above procedure, If you have flashed Ardatdat's Kernel first & have installed any ROM Specially ANGEEK ROM(coz having problem in that rom particularly as per users) Then Follow the Process:
2.1) Go to CMW Recovery MOD & Install Latest CMW 6.0.1.1
2.2) Wipe Data/Factory Reset.
2.3) Go to CMW recovery again & Just Restore you previous backup of any ROM.
2.4) Open ODIN 3.07(Right Click over Exe & select "Run As Administrator") & Follow the steps for flashing Stock ROM using this tutorial
2.5) After Booting just Flash CMW V6 using ODIN 3.07.
2.6) Don't Wipe Data / Factory Reset or Wipe cache / dalvik Cache. Just let it boot.
Now you have Successfully Flashed Nordic ROM over Angeek / Any other ROM.
Sent from my GT-I9103 using xda app-developers app

Try to restore ur cwm backup of gb if u have and den flash ics
I did the same thing i was also using angeek's rom and now i m using BB

Can I restore my cwm backup over xxlq9?
Sent from my GT-I9103 using xda app-developers app

pulley06 said:
Can I restore my cwm backup over xxlq9?
Click to expand...
Click to collapse
yes you can and which ODIN version you are using for flashing better to flash using v3......

mj.vikram said:
yes you can and which ODIN version you are using for flashing better to flash using v3......
Click to expand...
Click to collapse
Mj i had similar issue...i want to taste mazel n was flashin ics stock rom..using odin 3.x but it stuck in mid way durin flashin...
Wat cld b d reason ?? Later i restored my cwm backup..
Sent from my GT-I9103 using Tapatalk 2

mj.vikram said:
yes you can and which ODIN version you are using for flashing better to flash using v3......
Click to expand...
Click to collapse
Yeah I was using v3
Okay so I wanted to use the bb rom...are these steps enough?
1. Take tb for all apps
2. Restore backup
3. Flash xxlq9 via Odin
4. Flash cwm
5. Flash ardatdat kernel
6. Wipe data
7. Wipe cache
8. Flash bb v1,fixes, sensation mod.
Sent from my GT-I9103 using xda app-developers app

vipul12389mehta said:
Mj i had similar issue...i want to taste mazel n was flashin ics stock rom..using odin 3.x but it stuck in mid way durin flashin...
Wat cld b d reason ?? Later i restored my cwm backup..
Click to expand...
Click to collapse
i am also not sure buddy i also faced this kind of issue once then i restored to GB and flashed it again, but i flashed Mazel on Leaked ICS so i thought it was the problem ......
pulley06 said:
Yeah I was using v3
Okay so I wanted to use the bb rom...are these steps enough?
1. Take tb for all apps
2. Restore backup
3. Flash xxlq9 via Odin
4. Flash cwm
5. Flash ardatdat kernel
6. Wipe data
7. Wipe cache
8. Flash bb v1,fixes, sensation mod.
Click to expand...
Click to collapse
yes buddy you are correct, you need to wipe all 3 ie data, cache & Dalvic cache..
But i feel its not mandatory to flash XXLQ9 because i use to flash on my Leaked ICS and it was working fine when i used it.....

i followed all the steps mentioned above...the phone booted to the home screen of xxlq9...flashed bb rom successfully as per cwm...but the phone is stuck on the samsung screen that comes after galaxy r appears

vipul12389mehta said:
Mj i had similar issue...i want to taste mazel n was flashin ics stock rom..using odin 3.x but it stuck in mid way durin flashin...
Wat cld b d reason ?? Later i restored my cwm backup..
Sent from my GT-I9103 using Tapatalk 2
Click to expand...
Click to collapse
It gets stuck for like 10-15 secs but later it flashes ROM properly,
@mj whats wrong to do it with V1.85?
@pulley I also faced same problem yesterday, but I think that time i did not mount/unmout system so I reflashed BB again by pressing two times mount>unmount (final would be unmount/system), so just press two times, still not booting then again wipe all 3 (cache,dalvik and data)

I think there is few points we should consider while flashing BB or MAZEL2 rom if u are on ANGEEK ROM.
If anybody who sucessfully flashed Stock rom & then BB or Mazel 2 after Angeek, must come in front and give us the solution.
@pulley: buddy, as u r the OP, pls add the procesure in ur OP(after getting the solution) and give ur thread name as "Flashing stock rom after Angeek rom". Coz lots of people are flashing over angeek and facing lots of problem.
Asap answer will b appriciated.
Sent from my GT-I9103 using xda premium

kataria.vikesh said:
@pulley: buddy, as u r the OP, pls add the procesure in ur OP(after getting the solution) and give ur thread name as "Flashing stock rom after Angeek rom". Coz lots of people are flashing over angeek and facing lots of problem.
Asap answer will b appriciated.
Sent from my GT-I9103 using xda premium
Click to expand...
Click to collapse
Done :good:

pulley06 said:
Done :good:
Click to expand...
Click to collapse
Great buddy. I will add this in Angeek ROM'S OP.
Sent from my GT-I9103 using xda premium

I don't have a gb backup den what should I do???
Sent from my GT-I9103 using xda premium

Optional Method
on request of pulley06 posting this
I was facing same problem from yesterday, so i followed this
1. remove battery/SDcard/SIM
2. wait for 5 minutes
3. insert SIM and SD card and plug USB cable in phone and connect it with laptop/PC (DO NOT INSERT BATTERY)
4. wait for one minute and now insert battery (With USB cable connected)
5. switch on
6. flash stock ICS and reboot
5 flash CWM (I used 5.5 for BB ROM) and reboot
7 enter CWM
8 Mount/Unmount> click on Unmount/system again click same (so click two times)
9 now flash BB ROM and Reboot
10. Enter CWM and repeat step 8 and flash Sensation Theme. and reboot.

vishu1991 said:
I don't have a gb backup den what should I do???
Sent from my GT-I9103 using xda premium
Click to expand...
Click to collapse
I hope the above post helps you :thumbup:
Sent from my GT-I9103 using xda app-developers app

vishu1991 said:
I don't have a gb backup den what should I do???
Sent from my GT-I9103 using xda premium
Click to expand...
Click to collapse
try flashing Stock GB through Odin.

i created back up of both nordic and austian rom (also gb)
with ardadat kernel
just restore
wipe data/ cache
and flash roms
i have no issue,

Nordic rom flashing over angeek mod rom
Hey Buddies,
I did few R&D over Angeek ROM. As we are facing problem after Flashing NORDIC ROM over this One.
Here is the procedure:
If you Have any Back of ICS / GB then only apply these changes. Coz I have already did this.
Caution: Please take your Backup before then Try to Do below mentioned steps.
1) Requirements:
1.1) Must b having Ardatdat's eMMC erased Kernel i.e. V4.0 & higher.
1.2) ODIN V 3.07
1.3) Latest Kies Installed (for USB drivers)
1.4) Latest XXQL9 NORDIC ROM
1.5) CMW 6.0.1.1 for CMW flashing & CMW 6.0.1.1.tar for ODIN.
1.6) A PC..(of course):silly:
2) Flashing:
As per Suggestion by chandanbs, NORDIC ROM is almost come with Full in System Rom Partition.
So, here is few suggestion which was already suggested by our Great Mj.vikram buddy over this Thread & see Post no #8 there.
Hope, your ROM Partition is 619/620MB.
After Flashing above procedure, If you have flashed Ardatdat's Kernel first & have installed any ROM Specially ANGEEK ROM(coz having problem in that rom particularly as per users) Then Follow the Process:
2.1) Go to CMW Recovery MOD & Install Latest CMW 6.0.1.1
2.2) Wipe Data/Factory Reset.
2.3) Go to CMW recovery again & Just Restore you previous backup of any ROM.
2.4) Open ODIN 3.07(Right Click over Exe & select "Run As Administrator") & Follow the steps for flashing Stock ROM using this tutorial
2.5) After Booting just Flash CMW V6 using ODIN 3.07.
2.6) Don't Wipe Data / Factory Reset or Wipe cache / dalvik Cache. Just let it boot.
Now you have Successfully Flashed Nordic ROM over Angeek / Any other ROM.
Requesting OP to add this one also in his OP Post.

Vikesh.. looks good.. please add few steps as to how to make this nordic room rooted.. as you cant directly flash ardatdat kernel over it as it already full in system rom partition.. :silly:

This means if I don't have an earlier backup of ics/gb and i am on angeeks rom I can't flash any new rom...plz clarify....
Sent from my GT-I9103 using xda premium

How to back to GB from CyanogenMod 10 alpha 4 by dhiru?

Hii guys,i already ask this in official thread of cm 10 by dhiru but i can't understand,i can't get what dhiru say about don't flash modem in odin,and here is the step if i want to go back from cm 10 or cm9 by dhiru
1.repartition from odin
2.took and the battery and place it
3.flash xxkpe pda,modem,bootloader,csc
4.wait until phone booting and reset all data(press *2767*3855# in dialpad)
5.flash xxkpe all file again
And that's the right procedure?
Sent from my GT-I9300 using xda premium

Please someone help me
Sent from my GT-I9003 using xda premium

For me, I directly flashed xxkpe (since it will repartition it self) the flashed stock xxkpm

chung1213 said:
For me, I directly flashed xxkpe (since it will repartition it self) the flashed stock xxkpm
Click to expand...
Click to collapse
without pit or with pit?:silly:

I'm not sure bro but what you mentioned is the right way to go back to GB. But im not sure what did Dhiru told you about modem. What im doing is i have my backup custom rom of GB. So if i want to go back to GB i just restore it from CWM.

dude, a very simple instruction from Dhiru, do not flash modem with odin, it will corrupt your partition of CM alpha 4 which is using MTP system.
Alfix, have explain that use adb push to push the modem.bin of your choose to the /radio partition if you face radio issue or use a CWM flash zip to flash in recovery mode.
so, due to the new mtp partition system introduce by Dhriu CM10 alpha 4, the odin will not be use to flash anything. including the custom kernel.
how to go back to stock? you need to use odin with pit file, Lalotion case is a accident.
1. makesure your odin can detect your phone....
2. flash pit file first or together with XXKPE tar with or without bootloader. DON'T tell me it wont work, me and most of the member have done that, IT WORK!!
3. after flash KPE, your phone will reboot as normal.

marshygeek said:
I'm not sure bro but what you mentioned is the right way to go back to GB. But im not sure what did Dhiru told you about modem. What im doing is i have my backup custom rom of GB. So if i want to go back to GB i just restore it from CWM.
Click to expand...
Click to collapse
ok i have tooo many full backup on my pc

marshygeek said:
I'm not sure bro but what you mentioned is the right way to go back to GB. But im not sure what did Dhiru told you about modem. What im doing is i have my backup custom rom of GB. So if i want to go back to GB i just restore it from CWM.
Click to expand...
Click to collapse
Your method is quite confuaing me. For doing restore kernel.should be same which was used at the time of backup. GB kernel is entirely different from cm10 kernel. Then how u restore it??

vishal24387 said:
Your method is quite confuaing me. For doing restore kernel.should be same which was used at the time of backup. GB kernel is entirely different from cm10 kernel. Then how u restore it??
Click to expand...
Click to collapse
so just xxkpe+pit and i have another question,i can't access my usb stroge to copy files from my pc to my phone :crying:

MR.Volkf said:
so just xxkpe+pit and i have another question,i can't access my usb stroge to copy files from my pc to my phone :crying:
Click to expand...
Click to collapse
Before you have flashed pit + xxkpe or after?

vishal24387 said:
Your method is quite confuaing me. For doing restore kernel.should be same which was used at the time of backup. GB kernel is entirely different from cm10 kernel. Then how u restore it??
Click to expand...
Click to collapse
Vishal, u r right.
Restore from cwm just wont work cause partition format just wont right.
Sent from my GT-I9003 using Tapatalk 2

vishal24387 said:
Your method is quite confuaing me. For doing restore kernel.should be same which was used at the time of backup. GB kernel is entirely different from cm10 kernel. Then how u restore it??
Click to expand...
Click to collapse
But he just asked how to go to GB rom. Im doing this from the beginning. Is this bad? I got no issue so far.

I made an udate for my XPERIA S rom but i dont have signals tried loscounts method too,before releasing my rom I want to test my gsm ,Can anyone explain me step by step clearly how should I go back to KPU as base.

Vasishta Reddy said:
I made an udate for my XPERIA S rom but i dont have signals tried loscounts method too,before releasing my rom I want to test my gsm ,Can anyone explain me step by step clearly how should I go back to KPU as base.
Click to expand...
Click to collapse
But i think you must
1.flash xxkpe+pit
2.flash xxkpu
And then full wipe
Sent from my GT-I9003 using xda premium

chongns said:
dude, a very simple instruction from Dhiru, do not flash modem with odin, it will corrupt your partition of CM alpha 4 which is using MTP system.
Alfix, have explain that use adb push to push the modem.bin of your choose to the /radio partition if you face radio issue or use a CWM flash zip to flash in recovery mode.
so, due to the new mtp partition system introduce by Dhriu CM10 alpha 4, the odin will not be use to flash anything. including the custom kernel.
how to go back to stock? you need to use odin with pit file, Lalotion case is a accident.
1. makesure your odin can detect your phone....
2. flash pit file first or together with XXKPE tar with or without bootloader. DON'T tell me it wont work, me and most of the member have done that, IT WORK!!
3. after flash KPE, your phone will reboot as normal.
Click to expand...
Click to collapse
Thanks this works for me :good:
Edit:-one thing should i flash kpu with pit ?

if wanna revert from what so ever custom rom back to gb... just flash kpe+pit.. after that just flash whtso ever stock gb rom u want.. no need for flashing pit again. pit once with kpe and your done re-partitioning..
Sent from my GT-I9003 using xda app-developers app

MR.Volkf said:
so just xxkpe+pit and i have another question,i can't access my usb stroge to copy files from my pc to my phone :crying:
Click to expand...
Click to collapse
try flash pit first till you get blank screen->remove usb cable and battery->flash xkpe twice->factory reset->flash ddlf2 twice->factory reset.
i always do that step if want to back to gb or go for ics/jb.never have any issue.hope this will help u.

Help please

Hi....
I am not from here.... Am from dhd section...
I got a galaxy R......
So I would have some questions regarding flashing and ROMs....
1. Can someone suggest some stable ics ROMs? ? Most of the ics ROMs are inactive now..... So I can't choose any...
2. Can I install 4 ext recovery?
It's simple and touch recovery too...
3. If I can't change cmw recovery what are things I should format before flashing a rom.... And where can I find the options I mean under which category in recovery...
All I see is factory reset and format cache...
Thanks in advance...
Rk.....
Sent From The Future.....

rohithksaj said:
Hi....
1. Can someone suggest some stable ics ROMs? ? Most of the ics ROMs are inactive now..... So I can't choose any...
Click to expand...
Click to collapse
Flash [ROM] [4.0.4] [ZCLPD] Angeeks_I9103+A6900_Lv5_4.0.4 ROM..Most stable ICS ROM
2. Can I install 4 ext recovery?
It's simple and touch recovery too...
Click to expand...
Click to collapse
Yes. [i9103][CWM Advanced Edition] PhilZ Touch is recommended.
3. If I can't change cmw recovery what are things I should format before flashing a rom.... And where can I find the options I mean under which category in recovery...
All I see is factory reset and format cache...
Click to expand...
Click to collapse
Stock recovery doesnt come up with more options.
your need to flash any other recovery to install ROMs.
Visit this link for guidance..

Nikhil said:
Flash [ROM] [4.0.4] [ZCLPD] Angeeks_I9103+A6900_Lv5_4.0.4 ROM..Most stable ICS ROM
Yes. [i9103][CWM Advanced Edition] PhilZ Touch is recommended.
Stock recovery doesnt come up with more options.
your need to flash any other recovery to install ROMs.
Visit this link for guidance..
Click to expand...
Click to collapse
thanks ...one more doubt...
am on jellybeer now.....
so all i have to do is wipe and flash right ???
what all i have to wipe ????

rohithksaj said:
thanks ...one more doubt...
am on jellybeer now.....
so all i have to do is wipe and flash right ???
what all i have to wipe ????
Click to expand...
Click to collapse
yes, you need to wipe all things first (i.e. data,system & Caches) & Then flash ICS Stock ROM first coz of stability issues.

Disturbed™ said:
yes, you need to wipe all things first (i.e. data,system & Caches) & Then flash ICS Stock ROM first coz of stability issues.
Click to expand...
Click to collapse
Please give me the link to the stock...sorry I can't find in development section.......
Thanks a lot for the reply..
Sent from my GT-I9103 using xda app-developers app

rohithksaj said:
Please give me the link to the stock...sorry I can't find in development section.......
Thanks a lot for the reply..
Click to expand...
Click to collapse
Here you go..
2nd Post in [FIRMWARE] Stock Samsung Firmwares for Galaxy R

Nikhil said:
Here you go..
2nd Post in [FIRMWARE] Stock Samsung Firmwares for Galaxy R
Click to expand...
Click to collapse
Ok now all I have to do is wipe everything. Flash stock. Wipe everything flash the rom.... Right?
Sent from my GT-I9103 using xda app-developers app

rohithksaj said:
Ok now all I have to do is wipe everything. Flash stock. Wipe everything flash the rom.... Right?
Sent from my GT-I9103 using xda app-developers app
Click to expand...
Click to collapse
yes,
follow these steps.
0. copy zip file of Rom, Gapps(if required by rom), Ardatdat's kernel into your sdcard
1. wipe data/factory reset(along with dalvik cache)
2. flash stock firmware using odin (probably you'll experience boot loop)
3. flash CWM using odin
4. flash Ardatdat's kernel
5. perform factory reset(along with dalvik cache)
6. flash rom and gapps
Done..!

Nikhil said:
yes,
follow these steps.
0. copy zip file of Rom, Gapps(if required by rom), Ardatdat's kernel into your sdcard
1. wipe data/factory reset(along with dalvik cache)
2. flash stock firmware using odin (probably you'll experience boot loop)
3. flash CWM using odin
4. flash Ardatdat's kernel
5. perform factory reset(along with dalvik cache)
6. flash rom and gapps
Done..!
Click to expand...
Click to collapse
ok....thanks......
what happens if i skip the flashing stock step...i mean if i flash directly from jellybeer to the frankenstains mod by only doing factory reset and wiping caches ?????
And wiping caches and factory reset will do everything? Don't we have to wipe system and other things.?
And I don't like touch wiz... So can u please suggest a stable ics rom that runs without touch wiz?
I checked cyanogen... But no stable rc releases for this device.....
Thanks in advance...

rohithksaj said:
what happens if i skip the flashing stock step...i mean if i flash directly from jellybeer to the frankenstains mod by only doing factory reset and wiping caches ?????
And I don't like touch wiz... So can u please suggest a stable ics rom that runs without touch wiz?
I checked cyanogen... But no stable rc releases for this device.....
Click to expand...
Click to collapse
Yes, above steps are just to be on safe side. You can install frankenstains mod after factory reset and wiping dalvik caches and skip mentioned step..
I thought you wanted stock ics.
AFAIK there isnt any stable custom ics rom. for stable rom you need to adjust with touchwiz only.

You can always install a custom launcher, like Nova or Apex which give a pure AOSP feel.

Nikhil said:
Yes, above steps are just to be on safe side. You can install frankenstains mod after factory reset and wiping dalvik caches and skip mentioned step..
I thought you wanted stock ics.
AFAIK there isnt any stable custom ics rom. for stable rom you need to adjust with touchwiz only.
Click to expand...
Click to collapse
ok....so this is what i am going to do as you said...
full wipe....
Install stock ics using odin....
Flash CWM using odin
Download the ZIp
Flash it using CWM.
isnt it ???
i understood how to flash the rom via odin but not recovery...
tell me how......

Adam77Root said:
You can always install a custom launcher, like Nova or Apex which give a pure AOSP feel.
Click to expand...
Click to collapse
i know...but it will make 2 launchers ....Touch wiz and the Apex....it irritates me a bit....

rohithksaj said:
ok....so this is what i am going to do as you said...
full wipe....
Install stock ics using odin....
Flash CWM using odin
Download the ZIp
Flash it using CWM.
isnt it ???
Click to expand...
Click to collapse
not exactly, first you need to download the zip file of ardatdat kernel and custom rom you want to flash and keep it into sdcard before performing any steps as mentioned 0th step in this post and then flash stock ics
i understood how to flash the rom via odin but not recovery...
tell me how......
Click to expand...
Click to collapse
after flashing CWM (say v4.0.0.2) you will get an option "install zip from sdcard" in recovery mode(hope you know the key combination to enter into recovery mode) click on it and browse to the directory in which you kept kernel and rom
click on zip file of kernel and flash it
same way install rom.
hope you are clear now..
i know...but it will make 2 launchers ....Touch wiz and the Apex....it irritates me a bit....
Click to expand...
Click to collapse
you can set any launcher to default, touchwiz launcher wont interrupt again!

Nikhil said:
not exactly, first you need to download the zip file of ardatdat kernel and custom rom you want to flash and keep it into sdcard before performing any steps as mentioned 0th step in this post and then flash stock ics
after flashing CWM (say v4.0.0.2) you will get an option "install zip from sdcard" in recovery mode(hope you know the key combination to enter into recovery mode) click on it and browse to the directory in which you kept kernel and rom
click on zip file of kernel and flash it
same way install rom.
hope you are clear now..
you can set any launcher to default, touchwiz launcher wont interrupt again!
Click to expand...
Click to collapse
one more problem
i installed [ROM] [4.0.4] [ZCLPD] Angeeks_I9103+A6900_Lv5_4.0.4 ROM
but its chinese....
how to change the language ??

rohithksaj said:
one more problem
i installed [ROM] [4.0.4] [ZCLPD] Angeeks_I9103+A6900_Lv5_4.0.4 ROM
but its chinese....
how to change the language ??
Click to expand...
Click to collapse
Settings -> Language & Inputs -> change it to English (Just go by the icons)....

rohithksaj said:
one more problem
i installed [ROM] [4.0.4] [ZCLPD] Angeeks_I9103+A6900_Lv5_4.0.4 ROM
but its chinese....
how to change the language ??
Click to expand...
Click to collapse
Follow the icon of Language and Input and click on language, select English then..

Done....
Anyway to remove the Chinese comment while making the call?
Sent from my GT-I9103 using xda app-developers app

rohithksaj said:
Done....
Anyway to remove the Chinese comment while making the call?
Sent from my GT-I9103 using xda app-developers app
Click to expand...
Click to collapse
Delete the CC app.

Adam77Root said:
Delete the CC app.
Click to expand...
Click to collapse
Done... Everything is going nice and easy...
Thanks all for your support and replies......
:thumbup::thumbup::thumbup:
Sent from the future........

[Q] I need to install cynogenmod on my Tab2...can anyone help??

Am new in Rooting and modding devices
My Tab 2 P3100 is already rooted and i want to install Cynagonmod in it??
can anyone help me please???

That ain't a big deal.
Get the CM11 here:
http://forum.xda-developers.com/showthread.php?t=2525713
Choose the model, like yours is P3100.
-Get the official cm builds.
-download latest cm11 build
If you got cwm recovery:
Copy the downloaded cm11.zip to the root of sdcard
Wipe data/cache
Format system
Flash the zip!
Wipe dalvik cache
Reboot
Enjoy!!
Hit the thanks button if I helped
Sent from my Xolo Q1100 using Tapatalk

Don't forget to download the correct gapps (Google apps). You mentioned you are new to this. You will see that word a lot.
Sent from my GT-P3110 using xda app-developers app

A N D Y said:
That ain't a big deal.
Get the CM11 here:
http://forum.xda-developers.com/showthread.php?t=2525713
Choose the model, like yours is P3100.
-Get the official cm builds.
-download latest cm11 build
If you got cwm recovery:
Copy the downloaded cm11.zip to the root of sdcard
Wipe data/cache
Format system
Flash the zip!
Wipe dalvik cache
Reboot
Enjoy!!
Thanx so much for replying and i will ask u again if i face any problem and answer u if u dont face any problem
I used this method to root my device
https://www.youtube.com/watch?v=o3DBVWamJgk
if u can have a look at it it would b great
Click to expand...
Click to collapse