Hii guys,i already ask this in official thread of cm 10 by dhiru but i can't understand,i can't get what dhiru say about don't flash modem in odin,and here is the step if i want to go back from cm 10 or cm9 by dhiru
1.repartition from odin
2.took and the battery and place it
3.flash xxkpe pda,modem,bootloader,csc
4.wait until phone booting and reset all data(press *2767*3855# in dialpad)
5.flash xxkpe all file again
And that's the right procedure?
Sent from my GT-I9300 using xda premium
Please someone help me
Sent from my GT-I9003 using xda premium
For me, I directly flashed xxkpe (since it will repartition it self) the flashed stock xxkpm
chung1213 said:
For me, I directly flashed xxkpe (since it will repartition it self) the flashed stock xxkpm
Click to expand...
Click to collapse
without pit or with pit?:silly:
I'm not sure bro but what you mentioned is the right way to go back to GB. But im not sure what did Dhiru told you about modem. What im doing is i have my backup custom rom of GB. So if i want to go back to GB i just restore it from CWM.
dude, a very simple instruction from Dhiru, do not flash modem with odin, it will corrupt your partition of CM alpha 4 which is using MTP system.
Alfix, have explain that use adb push to push the modem.bin of your choose to the /radio partition if you face radio issue or use a CWM flash zip to flash in recovery mode.
so, due to the new mtp partition system introduce by Dhriu CM10 alpha 4, the odin will not be use to flash anything. including the custom kernel.
how to go back to stock? you need to use odin with pit file, Lalotion case is a accident.
1. makesure your odin can detect your phone....
2. flash pit file first or together with XXKPE tar with or without bootloader. DON'T tell me it wont work, me and most of the member have done that, IT WORK!!
3. after flash KPE, your phone will reboot as normal.
marshygeek said:
I'm not sure bro but what you mentioned is the right way to go back to GB. But im not sure what did Dhiru told you about modem. What im doing is i have my backup custom rom of GB. So if i want to go back to GB i just restore it from CWM.
Click to expand...
Click to collapse
ok i have tooo many full backup on my pc
marshygeek said:
I'm not sure bro but what you mentioned is the right way to go back to GB. But im not sure what did Dhiru told you about modem. What im doing is i have my backup custom rom of GB. So if i want to go back to GB i just restore it from CWM.
Click to expand...
Click to collapse
Your method is quite confuaing me. For doing restore kernel.should be same which was used at the time of backup. GB kernel is entirely different from cm10 kernel. Then how u restore it??
vishal24387 said:
Your method is quite confuaing me. For doing restore kernel.should be same which was used at the time of backup. GB kernel is entirely different from cm10 kernel. Then how u restore it??
Click to expand...
Click to collapse
so just xxkpe+pit and i have another question,i can't access my usb stroge to copy files from my pc to my phone :crying:
MR.Volkf said:
so just xxkpe+pit and i have another question,i can't access my usb stroge to copy files from my pc to my phone :crying:
Click to expand...
Click to collapse
Before you have flashed pit + xxkpe or after?
vishal24387 said:
Your method is quite confuaing me. For doing restore kernel.should be same which was used at the time of backup. GB kernel is entirely different from cm10 kernel. Then how u restore it??
Click to expand...
Click to collapse
Vishal, u r right.
Restore from cwm just wont work cause partition format just wont right.
Sent from my GT-I9003 using Tapatalk 2
vishal24387 said:
Your method is quite confuaing me. For doing restore kernel.should be same which was used at the time of backup. GB kernel is entirely different from cm10 kernel. Then how u restore it??
Click to expand...
Click to collapse
But he just asked how to go to GB rom. Im doing this from the beginning. Is this bad? I got no issue so far.
I made an udate for my XPERIA S rom but i dont have signals tried loscounts method too,before releasing my rom I want to test my gsm ,Can anyone explain me step by step clearly how should I go back to KPU as base.
Vasishta Reddy said:
I made an udate for my XPERIA S rom but i dont have signals tried loscounts method too,before releasing my rom I want to test my gsm ,Can anyone explain me step by step clearly how should I go back to KPU as base.
Click to expand...
Click to collapse
But i think you must
1.flash xxkpe+pit
2.flash xxkpu
And then full wipe
Sent from my GT-I9003 using xda premium
chongns said:
dude, a very simple instruction from Dhiru, do not flash modem with odin, it will corrupt your partition of CM alpha 4 which is using MTP system.
Alfix, have explain that use adb push to push the modem.bin of your choose to the /radio partition if you face radio issue or use a CWM flash zip to flash in recovery mode.
so, due to the new mtp partition system introduce by Dhriu CM10 alpha 4, the odin will not be use to flash anything. including the custom kernel.
how to go back to stock? you need to use odin with pit file, Lalotion case is a accident.
1. makesure your odin can detect your phone....
2. flash pit file first or together with XXKPE tar with or without bootloader. DON'T tell me it wont work, me and most of the member have done that, IT WORK!!
3. after flash KPE, your phone will reboot as normal.
Click to expand...
Click to collapse
Thanks this works for me :good:
Edit:-one thing should i flash kpu with pit ?
if wanna revert from what so ever custom rom back to gb... just flash kpe+pit.. after that just flash whtso ever stock gb rom u want.. no need for flashing pit again. pit once with kpe and your done re-partitioning..
Sent from my GT-I9003 using xda app-developers app
MR.Volkf said:
so just xxkpe+pit and i have another question,i can't access my usb stroge to copy files from my pc to my phone :crying:
Click to expand...
Click to collapse
try flash pit first till you get blank screen->remove usb cable and battery->flash xkpe twice->factory reset->flash ddlf2 twice->factory reset.
i always do that step if want to back to gb or go for ics/jb.never have any issue.hope this will help u.
Related
Yes this is strange ... i was working on REMICS v4 and it was working fine till yesterday but then everything(apps,explorer,theme etc) started crashing so i decided to downgrade to gingerbread.
I tried flashing XXKPE & XXKPQ but both of them keeps rebooting after installation and no User Interface ever appear.
I also tried to install the latest REMICS but it is not working too. What should i do .. its as if the old REMICS file cannot be altered and thus are not allowing any other ROM to work on my device :/ . I can't format the internal sd too
I know its abstract but can any one help ??
alphasahil said:
Yes this is strange ... i was working on REMICS v4 and it was working fine till yesterday but then everything(apps,explorer,theme etc) started crashing so i decided to downgrade to gingerbread.
I tried flashing XXKPE & XXKPQ but both of them keeps rebooting after installation and no User Interface ever appear.
I also tried to install the latest REMICS but it is not working too. What should i do .. its as if the old REMICS file cannot be altered and thus are not allowing any other ROM to work on my device :/ . I can't format the internal sd too
I know its abstract but can any one help ??
Click to expand...
Click to collapse
Clean flash
First download xxkpe firmware package from http://forum.xda-developers.com/showthread.php?t=1004647
Read and follow instructions to flash xxkpe using odin from http://forum.xda-developers.com/showthread.php?t=1133787
Make sure you go thru the complete flashing (pit/pda/modem/etc)
Repeat steps starting from 9 again. This way you'll flash xxkpe twice.
Now you can flash the firmware of your choice. I'll recommend ddlf2 for stock and cm9a11 (or any other based on it).
For ddlf2
download ddlf2 firmware from http://forum.xda-developers.com/showthread.php?t=1741370
Plus download DDLF2_CFROOT-05-07-2012.tar from http://forum.xda-developers.com/showthread.php?t=1331253
Go back to download mode and flash ddlf2 also using odin
Go back to download mode and flash cf-root for ddlf2 again using odin
For CM9A11
download cm9a11 and "google apps" package from http://forum.xda-developers.com/showthread.php?t=1449649
Copy cm9a1a and googleapps zip file to external sd card, as you'll be flashing them using cwm recovery.
go to cwm recovery menu and flash cm9a11 using "install zip file from sd card" option. Make sure you religiously follow all instructions on
http://forum.xda-developers.com/showthread.php?t=1449649
i think ur internal memory may be corrupted try flashing any other rom if that gives any error Ecant mount...then ur internal memory is surely corrupted
Hetalk said:
Clean flash
First download xxkpe firmware package from http://forum.xda-developers.com/showthread.php?t=1004647
Read and follow instructions to flash xxkpe using odin from http://forum.xda-developers.com/showthread.php?t=1133787
Make sure you go thru the complete flashing (pit/pda/modem/etc)
Repeat steps starting from 9 again. This way you'll flash xxkpe twice.
Now you can flash the firmware of your choice. I'll recommend ddlf2 for stock and cm9a11 (or any other based on it).
For ddlf2
download ddlf2 firmware from http://forum.xda-developers.com/showthread.php?t=1741370
Plus download DDLF2_CFROOT-05-07-2012.tar from http://forum.xda-developers.com/showthread.php?t=1331253
Go back to download mode and flash ddlf2 also using odin
Go back to download mode and flash cf-root for ddlf2 again using odin
For CM9A11
download cm9a11 and "google apps" package from http://forum.xda-developers.com/showthread.php?t=1449649
Copy cm9a1a and googleapps zip file to external sd card, as you'll be flashing them using cwm recovery.
go to cwm recovery menu and flash cm9a11 using "install zip file from sd card" option. Make sure you religiously follow all instructions on
http://forum.xda-developers.com/showthread.php?t=1449649
Click to expand...
Click to collapse
Well i tried flashing XXKPE twice n then XXKPQ n i even tried it with the universal kernel .. it didn't work .. you think DDLF2 would be worth a try ??
pratik_s said:
i think ur internal memory may be corrupted try flashing any other rom if that gives any error Ecant mount...then ur internal memory is surely corrupted
Click to expand...
Click to collapse
Well REMICS works .. but everything crash's if i work on it ... n ya i do get the error e: can't mount /data when i try to install a stock ROM of Gingerbread ... but no such error in FROYO or REMICS
Even i had same issue and when i tried to flash only Rom xxkpq, mobile didn't boot. Then I flashed xxkpq along with bootloader, modem files and it worked. I think it's problem with the bootloader.
Sent from my GT-I9003 using xda app-developers app
abhisal said:
Even i had same issue and when i tried to flash only Rom xxkpq, mobile didn't boot. Then I flashed xxkpq along with bootloader, modem files and it worked. I think it's problem with the bootloader.
Sent from my GT-I9003 using xda app-developers app
Click to expand...
Click to collapse
You flashed it with XXKPE bootloader ?? I will give it a try but i guess my internal memory is corrupted
i think ur internal memory is corrupted i have also faced the same problem u can refer my thread if ur getting that problem try the solution posted by ahmedjust http://forum.xda-developers.com/showthread.php?t=1735718 it is a difficult solution to implement but u can try
pratik_s said:
i think ur internal memory is corrupted i have also faced the same problem u can refer my thread if ur getting that problem try the solution posted by ahmedjust http://forum.xda-developers.com/showthread.php?t=1735718 it is a difficult solution to implement but u can try
Click to expand...
Click to collapse
well i tried it already ... but after editing and pushing the fstab files the system doesn't boot and n if i flasg again then the files are gone ...
Infact on rebooting to recovery the original fstab file replaces the new edited one ..
alphasahil said:
well i tried it already ... but after editing and pushing the fstab files the system doesn't boot and n if i flasg again then the files are gone ...
Infact on rebooting to recovery the original fstab file replaces the new edited one ..
Click to expand...
Click to collapse
if ur sl is in warranty rush to your nearest samsung service centre and get ur motherboard replaced for free.
i flashed with xxkpq bootloader. I will send you link as soon as i reach home. give it a try. I flashed stock Rom and then re rooted it.
Sent from my GT-I9003 using xda app-developers app
pratik_s said:
if ur sl is in warranty rush to your nearest samsung service centre and get ur motherboard replaced for free.
Click to expand...
Click to collapse
I wish i was ...
http://forum.xda-developers.com/showthread.php?t=1133787
http://androidadvices.com/root-sams...ingerbread-xxkpq-236-firmware/3/#.UBYIvKDwqAA
Follow exact steps to install this Rom.
Sent from my GT-I9003 using xda app-developers app
abhisal said:
http://forum.xda-developers.com/showthread.php?t=1133787
http://androidadvices.com/root-sams...ingerbread-xxkpq-236-firmware/3/#.UBYIvKDwqAA
Follow exact steps to install this Rom.
Sent from my GT-I9003 using xda app-developers app
Click to expand...
Click to collapse
sorry but i guess you didn't read my initial post. I know how to flash ROMS... I hv flashed many over the past.
I can't flash due to some fault in the internal storage.. any solutions??
Sorry my bad. Actually wanted to give u link which contains stock roms along with bootloader, modem etc.
http://forum.xda-developers.com/showthread.php?t=1004647
I flashed xxkpq from above link. Try this. Hope this works
Sent from my GT-I9003 using xda app-developers app
abhisal said:
Sorry my bad. Actually wanted to give u link which contains stock roms along with bootloader, modem etc.
http://forum.xda-developers.com/showthread.php?t=1004647
I flashed xxkpq from above link. Try this. Hope this works
Sent from my GT-I9003 using xda app-developers app
Click to expand...
Click to collapse
This method only works if your internal card is unreadable but in case it is readable and has bad sectors the above method fails
WHY? It's actually very simple and logical .. when your internal card is unreadable the /dev/mmcblk0 is automatically assigned to external card which if partitioned properly can support a new ROM
But if the internal card has bad sectors than /dev/mmcblk0 is still with internal card and thus you can't install a new ROM on this corrupt card.. Therefore boot.img needs to be altered to map all mount data to mmcblk1 instead of mmcblk0.. it's very lengthy and tiring ... so unless you have a lot of free time and very less money to spend i recommend going to the service center .. :/
Hay guys. Please help me. Some days ago i flashed my phone with 4.0.4 by Kies and everything was ok but after some days using ICS i was totally disappointed from it and decide to back my perfectly working 2.3.6 (Ausrian rom) with which i was before. But now after flashing it with Odin my phone stays on the first screen (Choose lang.) and than some messages start to shows up saying some google services can't start and after some seconds the phone restarts and all repeats again. PLEASE HELP if it's possible! Thanks in advance!!
may be flashing problem/Download file may be having some problem, Try to download the Stock ROM and Flash it again with ODIN and check...
mj.vikram said:
may be flashing problem/Download file may be having some problem, Try to download the Stock ROM and Flash it again with ODIN and check...
Click to expand...
Click to collapse
Yes, i used the original Austria rom (3 Hutchinson) which i downloaded from sammobbile's stock rom section...
Marinski79 said:
Yes, i used the original Austria rom (3 Hutchinson) which i downloaded from sammobbile's stock rom section...
Click to expand...
Click to collapse
Check if you are able to Boot in to Recovery Mode, if possible then Wipe Data and reboot the system..
i m using frankstainmod ICS , can i flash cm 7.2 using cwm???
TUSHARKATE007 said:
i m using frankstainmod ICS , can i flash cm 7.2 using cwm???
Click to expand...
Click to collapse
Better you downgrade to GB and then flash CM 7 on it....
mj.vikram said:
Better you downgrade to GB and then flash CM 7 on it....
Click to expand...
Click to collapse
thanks
go to recovery mode
do a factory reset
cache wipe
You do not need to flash cwm.
use gb original recovery.
Sent from my GT-I9103 using xda app-developers app
---------- Post added at 12:56 AM ---------- Previous post was at 12:45 AM ----------
Or you can flash cwm.
Then u can recovery from the backup.
For my experience, I encouter the same things as u (downgrade to gb, can't bpot).
What I do is listed below:
1. power off phone.
2. power on phone and press home+volume up to enter one mode (I don't how to name it. Also, the mode is like cwm, but only few functon)
3. select factory reset. select cache……
4. then u can reboot to a clean gb systen
5. flash cwm via odin and recovery it to the backup I made before flash ics.
Sent from my GT-I9103 using xda app-developers app
mj.vikram said:
Check if you are able to Boot in to Recovery Mode, if possible then Wipe Data and reboot the system..
Click to expand...
Click to collapse
Yes, this worked! Thanks a lot dude!!! My biggest problem was that i didn't made a backup before flash to ICS... And i wasn't rooted my phone and installed CWM until now The second problem was that i wasn't able to start CWM after installing it. I tried 10 times maybe and when i was going to give up i get lucky and it starts (ufff.. Than i wipe data/cash and even did factory reset and after that my phone reborn DD
Thanks again for all answers and help guys
Marinski79 said:
Yes, this worked! Thanks a lot dude!!! My biggest problem was that i didn't made a backup before flash to ICS... And i wasn't rooted my phone and installed CWM until now The second problem was that i wasn't able to start CWM after installing it. I tried 10 times maybe and when i was going to give up i get lucky and it starts (ufff.. Than i wipe data/cash and even did factory reset and after that my phone reborn DD
Thanks again for all answers and help guys
Click to expand...
Click to collapse
Happy to help ,....
Can any one tech me how to flash CM10 on galaxy tab plus from zero??
Cause when I try to flash it's got boot loop.
nopphonyel said:
Can any one tech me how to flash CM10 on galaxy tab plus from zero??
Cause when I try to flash it's got boot loop.
Click to expand...
Click to collapse
Can r u entered Download mode or Recovery mode?
Try to hold on volume up and power button until screen off then release and press power button again for enter recovery mode.
After entered Recovery mode "Wipe User Data", "Wipe Cache" and "Reboot"
If this solution cant solve a problem please try to flash your tab to Official HC and ICS with Odin then Flash to CM10 again.
Dont Wipe Data with CM Touch ,please use clockworkmod 6 for wipe data.
Yep
Sent from my GT-S5570 using xda app-developers app
meow-meow said:
Can r u entered Download mode or Recovery mode?
Try to hold on volume up and power button until screen off then release and press power button again for enter recovery mode.
After entered Recovery mode "Wipe User Data", "Wipe Cache" and "Reboot"
If this solution cant solve a problem please try to flash your tab to Official HC and ICS with Odin then Flash to CM10 again.
Click to expand...
Click to collapse
I have problem when I wipe data. it's auto reboot
Sent from my GT-S5570 using xda app-developers app
nopphonyel said:
I have problem when I wipe data. it's auto reboot
Sent from my GT-S5570 using xda app-developers app
Click to expand...
Click to collapse
R u try flash to HC ?
** If u flashed and found a boot-loop after flash HC, please follow up latest post.
Halp!
Good timing, i have a similar problem.
I was at ICS 4.0.4 rooted then decided to downgrade to HC stock to back it up (since ICS is buggy).. I flashed using odin 3v1.85 using a single file PDA: P6200DXKL3_P6200OLBKK8_P6200DXKK5_HOME.tar.md5. After flashing HC, I'm stuck at bootloop.
Then I have no choice than to flash it up from there, since I can still access recovery 3e.. Firstly i flashed CWM 6 using odin, then tried to update CM10 from my external sdcard. Then this error shows up
Installing: /emmccm-10-20120904-UNOFFICIAL-p6200.zip
Finding update package...
E: unknown volume for path [/emmccm-10-20120904-UNOFFICIAL-p6200.zip
E: Can/t mount /emmccm-10-20120904-UNOFFICIAL-p6200.zip
installation aborted.
BTW I wiped data and cache using CWM. I accidentally formatted the sdcard my real objective is to mount it then I didnt notice.
oyea, tried flashing it using touch cwm, it worked but it boot loops..then i tried acessing recovery but it just went off, and i cant turn it on.
Good thing when i charge it on an outlet the screen goes on then i went to Downloadmode again. I reflashed it back to HC via odin.
NOTE: ( MY tab is ruinned. now the screen won't turn on, only when I'm charging it as previously stated. The only thing i can access is download mode
Thanks in advance :crying: I'm at lost
I have a experiences like this. I try entered to download mode and re-flash my tab to HC with Odin then reboot a device and wipe all user data.
Finally, I'm on CM10. :victory:
Flashing back to ICS fixed the bootloop, then from there it's history!
Though I forgot to copy the cwm backup of my ICS before formatting the sdcard. Now it's gone :silly: . Anyway, it's nice to start off from scratch.
Can someone tell me how to go back to stock HC/ICS from ICS from CM10 without the nandroid backup? Just in case some problems will occur in the future. Thanks!
valkyrie-randgris said:
Finally, I'm on CM10. :victory:
Flashing back to ICS fixed the bootloop, then from there it's history!
Though I forgot to copy the cwm backup of my ICS before formatting the sdcard. Now it's gone :silly: . Anyway, it's nice to start off from scratch.
Can someone tell me how to go back to stock HC/ICS from ICS from CM10 without the nandroid backup? Just in case some problems will occur in the future. Thanks!
Click to expand...
Click to collapse
I rollback from CM10 to Stock HC with Odin and download stock HC from Sammobile.com.
Thanks mate! I'll keep that in mind.
I just hope bootloop or bootstuck won't occur. Like when I flashed the single HC tar file from sammy from ICS. Cheers!
So .. what should I do?
Sent from my GT-S5570 using xda app-developers app
Check below link if want to downgrade in safest way, using mobile odin.
http://forum.xda-developers.com/showthread.php?p=32427424
Sent from my GT-P6200 using Tapatalk 2
nopphonyel said:
So .. what should I do?
Sent from my GT-S5570 using xda app-developers app
Click to expand...
Click to collapse
Nopphoyel, can u turn your tab to download mode.?
Hope can, so here the step.
Try flash hc using odin1.85, put the firmware package to pda, check the re-partition. Select pit and put .pit file and flash.
It worked for me.
Get the pit file under 'dyelen' name from below link, download & unzip.
http://forum.xda-developers.com/showthread.php?p=31936913
Try 1st, hope work on u too..
How to flash cm10? Here the drill.....
1. Root. Download the supersuv0.94.zip from below link and save to externalsdcard, Turn to recovery mode/ Choose update from sdcard and flash supersu v0.94.zip:
http://www.google.com.ph/url?sa=t&r...zoHgDA&usg=AFQjCNFyqHRhzKdNa_kvZPRsaep-6XEt9g
2. Clockworkmod recovery- the most important thing if want flash cm10, u need the cwr. Download the recovery mode .img from aorth.
http://forum.xda-developers.com/showthread.php?p=29077817
,rename to recovery.img and save on external sdcard. U can flash recovery using heimdall or mobile odin, i prefer mobile odin. Download mobile odin.
http://forum.xda-developers.com/showthread.php?p=19375402
check the recovery select your recovery.img from external sdcard and flash. Wait until it reboot to the recovery. Before u flash any rom please make backup to internal sdcard & Try to restore 1st to makesure your nandroid backup work. Also backup using go backup or titanium backup. If your nandroid backup getting weird this optional to get your data back.
3. Backup call log and sms. Please backup to external sdcard just change the backup folder in setting. This very useful to restore back your log & Sms after your flash new rom.
Call log backup : https://play.google.com/store/apps/...hu.CallLogBackupRestore&feature=search_result
SmsBackup : https://play.google.com/store/apps/details?id=com.riteshsahu.SMSBackupRestore&feature=search_result
3. If all work. Wipe data/Cache/Dalvik.
Flash new rom
cm10: http://forum.xda-developers.com/showthread.php?p=30434924
happy flashing...
Do With Your Own Risk. And Don't Wipe Data using Ics stock recovery or temporary cwr. Since they detected have emmc brickbug and cause hardbrick. Hardbricks mean totally brick, only JTAG or change main board your last hope.
thanks to aorth for make this tablet getting better and better..
Sent from my GT-P6200 using Tapatalk 2
bujai5279 said:
Nopphoyel, can u turn your tab to download mode.?
Hope can, so here the step.
Try flash hc using odin1.85, put the firmware package to pda, check the re-partition. Select pit and put .pit file and flash.
It worked for me.
Get the pit file under 'dyelen' name from below link, download & unzip.
http://forum.xda-developers.com/showthread.php?p=31936913
Try 1st, hope work on u too..
How to flash cm10? Here the drill.....
1. Root. Download the supersuv0.94.zip from below link and save to externalsdcard, Turn to recovery mode/ Choose update from sdcard and flash supersu v0.94.zip:
http://www.google.com.ph/url?sa=t&r...zoHgDA&usg=AFQjCNFyqHRhzKdNa_kvZPRsaep-6XEt9g
2. Clockworkmod recovery- the most important thing if want flash cm10, u need the cwr. Download the recovery mode .img from aorth.
http://forum.xda-developers.com/showthread.php?p=29077817
,rename to recovery.img and save on external sdcard. U can flash recovery using heimdall or mobile odin, i prefer mobile odin. Download mobile odin.
http://forum.xda-developers.com/showthread.php?p=19375402
check the recovery select your recovery.img from external sdcard and flash. Wait until it reboot to the recovery. Before u flash any rom please make backup to internal sdcard & Try to restore 1st to makesure your nandroid backup work. Also backup using go backup or titanium backup. If your nandroid backup getting weird this optional to get your data back.
3. Backup call log and sms. Please backup to external sdcard just change the backup folder in setting. This very useful to restore back your log & Sms after your flash new rom.
Call log backup : https://play.google.com/store/apps/...hu.CallLogBackupRestore&feature=search_result
SmsBackup : https://play.google.com/store/apps/details?id=com.riteshsahu.SMSBackupRestore&feature=search_result
3. If all work. Wipe data/Cache/Dalvik.
Flash new rom
cm10: http://forum.xda-developers.com/showthread.php?p=30434924
happy flashing...
Do With Your Own Risk. And Don't Wipe Data using Ics stock recovery or temporary cwr. Since they detected have emmc brickbug and cause hardbrick. Hardbricks mean totally brick, only JTAG or change main board your last hope.
thanks to aorth for make this tablet getting better and better..
Sent from my GT-P6200 using Tapatalk 2
Click to expand...
Click to collapse
Every thing is OK but when i finish flash to HC It's locked with password and I don't know password.:crying:
And I tried to flash again and it stuck at Samsung Galaxy Tab Plus 7.0 logo (Not booting logo,This logo show before boot to android OS) :crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying:
Did u wipe from ICS stock recovery or temporary cwr(Cwr with touch)? My tab also need password on hc after hardbricks 3month ago, i send to centre, they change the main board..
Try find people who can perform JTAG, or send to centre your last hope...Hopefully centre not find your root the device, your waranty will void & u need to pay for that board.
Sorry dude..
Sent from my GT-P6200 using Tapatalk 2
!!??
bujai5279 said:
Did u wipe from ICS stock recovery or temporary cwr(Cwr with touch)? My tab also need password on hc after hardbricks 3month ago, i send to centre, they change the main board..
Try find people who can perform JTAG, or send to centre your last hope...Hopefully centre not find your root the device, your waranty will void & u need to pay for that board.
Sorry dude..
Sent from my GT-P6200 using Tapatalk 2
Click to expand...
Click to collapse
Do u know how much is it I mean main board
Im from malaysia, in ringgit rm713.
Sent from my GT-P6200 using Tapatalk 2
I'm on Paranoid Android 2.50 (Androi 4.1.2), coming from Android 3.2.
Onething that I'd like to share is you should flash a cusstom rom wwhen you're on Android 3.2. Some friends of mine used the stock Android 4.0 then flashed CM10 or Paranoid and their devices bricked.
although very beautiful and fluid is still immature has many bugs that I at least I consider fundamental for me ... for example, does not read the external sd ... not the video player does not read the pen drive .... well you would for hands just a phone and not a very large smartphone / tablet sfuttare in full ... I have uninstalled immediately expect a more complete version ... more well known problems and then decide to suit your needs if you install it or not. hello ..
Inviato dal mio GT-P7500 con Tapatalk 2
---------- Post added at 10:31 PM ---------- Previous post was at 10:26 PM ----------
thangbithit said:
I'm on Paranoid Android 2.50 (Androi 4.1.2), coming from Android 3.2.
Onething that I'd like to share is you should flash a cusstom rom wwhen you're on Android 3.2. Some friends of mine used the stock Android 4.0 then flashed CM10 or Paranoid and their devices bricked.
Click to expand...
Click to collapse
Hello Could you tell me what bugs has paranoid 2:50?
Inviato dal mio GT-P7500 con Tapatalk 2
bujai5279 said:
Did u wipe from ICS stock recovery or temporary cwr(Cwr with touch)? My tab also need password on hc after hardbricks 3month ago, i send to centre, they change the main board..
Try find people who can perform JTAG, or send to centre your last hope...Hopefully centre not find your root the device, your waranty will void & u need to pay for that board.
Sorry dude..
Sent from my GT-P6200 using Tapatalk 2
Click to expand...
Click to collapse
Can some body help me please.I am trying to install cm10 rom and i get this message E:Error in /Eternal _sd/cm-10 (status) installation aborted.Please helpme
Hi guys
I have a problem...i have rooted the galaxy s scl of my friend but now he want it unrooted.
I have the frankestain mod rom and i should unroot it and install a stock firmware..
How could i do it?
Flash kpe before flashing to another stock firmware such as kpu.
Sent from my GT-I9003 using xda premium
Flash XXKPE with Odin. The flash any other firmware of your choice
I still dont understand why everyone say to flash kpe first...
Seriously plz explain it to me !!
Sent from my GT-I9003 using xda app-developers app
Plz everyone here from the next time do this kind of chit-chat in general thread this is Development thread.
And for ans flash any stock rom using odin you will be unroot and on stovk rom too. For steps follow this thread.
http://forum.xda-developers.com/showthread.php?t=1133787
nicsptl said:
Plz everyone here from the next time do this kind of chit-chat in general thread this is Development thread.
And for ans flash any stock rom using odin you will be unroot and on stovk rom too. For steps follow this thread.
http://forum.xda-developers.com/showthread.php?t=1133787
Click to expand...
Click to collapse
I have done it but now in the phone there's only the bootanimation but nothing else...
G.Galante said:
I have done it but now in the phone there's only the bootanimation but nothing else...
Click to expand...
Click to collapse
you got bootloop, flash XXKPE+PIT it can solve your prob after flash that firmware,flash another stable firmware than XXKPE
simratcs said:
I still dont understand why everyone say to flash kpe first...
Seriously plz explain it to me !!
Sent from my GT-I9003 using xda app-developers app
Click to expand...
Click to collapse
Because kpe is came with full firmware that is (bootloader, pda, phone,csc)
And when you use pit file you need all these files
To unroot single pda file also works
If any problems facing then flash with pit+kpe
Correct me if I am wrong
Sent from my GT-I9003 using xda premium
why KPE+PIT
OK, first for all, we have 2 type of firmware.
1. one package .tar file.
2. component type firmware .tar file.
for one package type, you only see one tar file which are flash using odin place in the PDA box. this is the incremental patch from you current working phone. you find all the data still in place.
for the component type firmware, you will have 3 or 4 tar file to flash using odin and place it in respective box. you will need to reset you phone, all the data will gone.
so, why must using component type, if need to flash to stock. Becuase you already corropted the firmware.
1. you have change the recovery partition and rooted and with custome kernel.
2. you have converted to EXT4, (stock is rfs)
3. you have bootloop because the above you have done.
others which having same thing done but not at bootloop, its becuase their done the home work (search and read). this i'm very sure about it.
so, if you have the boot loop, mean you done some step wrong.
so to save you, follow the instruction on the link above you should be fine.
legend:
pit file - this is partition information table, to tell the odin and phone how to prepare the partition for flashing.
example: I9003_latona_20110114.pit
PDA tar: contant all the system partition.
example: I9003DXKF1-REV08-ALL-low-CL1020446.tar
CSC tar: contant of regional specified setting
example: GT-I9003-CSC-MULTI-OLBKB2.tar
Modem: contant the hardware setting.
example:MODEM_I9003DXKB2_REV_00_CL863799.tar
bootloader, do not use this, if you are not upgrading from Froyo to GB. as this is a very important portion of you phone. ( the name already tell you that, "boot" "loader") do not mass with it.
same as PC, when you infected by virus or you have done someting corrupted the file of windows, you will need a reformat or reinstall OS.
hence, for the phone, flash the KPE+PIT
same as PC, when you wanted to update the windows update, you will just click the update and the windows patch file will install, same as you flash the 1 package firmware.
that all, hope you can understant
chongns said:
why KPE+PIT
OK, first for all, we have 2 type of firmware.
1. one package .tar file.
2. component type firmware .tar file.
for one package type, you only see one tar file which are flash using odin place in the PDA box. this is the incremental patch from you current working phone. you find all the data still in place.
for the component type firmware, you will have 3 or 4 tar file to flash using odin and place it in respective box. you will need to reset you phone, all the data will gone.
so, why must using component type, if need to flash to stock. Becuase you already corropted the firmware.
1. you have change the recovery partition and rooted and with custome kernel.
2. you have converted to EXT4, (stock is rfs)
3. you have bootloop because the above you have done.
others which having same thing done but not at bootloop, its becuase their done the home work (search and read). this i'm very sure about it.
so, if you have the boot loop, mean you done some step wrong.
so to save you, follow the instruction on the link above you should be fine.
legend:
pit file - this is partition information table, to tell the odin and phone how to prepare the partition for flashing.
example: I9003_latona_20110114.pit
PDA tar: contant all the system partition.
example: I9003DXKF1-REV08-ALL-low-CL1020446.tar
CSC tar: contant of regional specified setting
example: GT-I9003-CSC-MULTI-OLBKB2.tar
Modem: contant the hardware setting.
example:MODEM_I9003DXKB2_REV_00_CL863799.tar
bootloader, do not use this, if you are not upgrading from Froyo to GB. as this is a very important portion of you phone. ( the name already tell you that, "boot" "loader") do not mass with it.
same as PC, when you infected by virus or you have done someting corrupted the file of windows, you will need a reformat or reinstall OS.
hence, for the phone, flash the KPE+PIT
same as PC, when you wanted to update the windows update, you will just click the update and the windows patch file will install, same as you flash the 1 package firmware.
that all, hope you can understant
Click to expand...
Click to collapse
That i already know man..
But why kpe first..
Does it like increases the battery life or what ??
Everyone says to flash kpe...
But what about ddkp3 ??
Sent from my GT-I9003 using xda app-developers app
simratcs said:
That i already know man..
But why kpe first..
Does it like increases the battery life or what ??
Everyone says to flash kpe...
But what about ddkp3 ??
Sent from my GT-I9003 using xda app-developers app
Click to expand...
Click to collapse
Kpe is the foundation of the other stock rom.
simratcs said:
That i already know man..
But why kpe first..
Does it like increases the battery life or what ??
Everyone says to flash kpe...
But what about ddkp3 ??
Sent from my GT-I9003 using xda app-developers app
Click to expand...
Click to collapse
no that "must" use KPE, it depend on your choose, as long as it is component type firmware, i use DXKF1, so far so good. and most importantly you can use it with pit file. note: 1 package tar file can not use with pit file.
if you want to solve the bootloop, either you do trouble shoot the rootcause, or close you eyes, and once and for all "reformat" your phone.
that why we need the pit.
hope you "already" know that.
BTW, i see no different on KPE on battery life. i use DXKP9 it is a GB, and flash Bam Kernel. battery life is good 1.5day per charge.
Hi,
I have rooted DDLF2 (using CF-ROOT). Now that I no more need root (stopped using an app that needed root), I need to get back to stock DDLF2.
I have already unrooted it using recovery mode > unroot.zip method.
All I need is 100% samsung stock DDLF2 on the phone now, without the cf-kernel, cf-recovery and apps that the rooting process brought in.
Please advise...
Thanks
Dude thats simple...
Just flash ddlf2 using odin and u are good to go !!
Sent from my GT-I9003
simratcs said:
Dude thats simple...
Just flash ddlf2 using odin and u are good to go !!
Sent from my GT-I9003
Click to expand...
Click to collapse
Yes, just clean flash and the root is gone
Sent from my GT-I9003 using Tapatalk 2
agnivo007 said:
Hi,
I have rooted DDLF2 (using CF-ROOT). Now that I no more need root (stopped using an app that needed root), I need to get back to stock DDLF2.
I have already unrooted it using recovery mode > unroot.zip method.
All I need is 100% samsung stock DDLF2 on the phone now, without the cf-kernel, cf-recovery and apps that the rooting process brought in.
Please advise...
Thanks
Click to expand...
Click to collapse
take the CR-ROOT zp file, open up with winrar, replace the file with DDLF2 normalboot.img, than flash with odin PDA. you will get back the stock kernel or maybe you will have boot looping, if not bootlooping, reboot the phone once, than factory reset.
try at your own risk.
chongns said:
take the CR-ROOT zp file, open up with winrar, replace the file with DDLF2 normalboot.img, than flash with odin PDA. you will get back the stock kernel or maybe you will have boot looping, if not bootlooping, reboot the phone once, than factory reset.
try at your own risk.
Click to expand...
Click to collapse
Dude i think he is a new member so dont tell him such stuff that is a bit confusing for a newbie...
Let him just clean flash ddlf2
Sent from my GT-I9003
flash xxkpe then ddlf2
karanmirchandani96 said:
flash xxkpe then ddlf2
Click to expand...
Click to collapse
Hi, can I flash xxkpe on CWM recovery mode and update to DDLF2 from kies?
Just wanted to know can stock ROMs can be flashed from CWM recovery, just like cROM.
No u have to flash them via Odin only.
sent from Samsung galaxy S i9003 Remics JB v3
Thanks for the Info!!!
THANKS!
Flashed via ODIN as PDA, did wipe, cache clean and now I'm set...
hi i flashed ddlf2 everything is working except my wifi is there any solution?
agnivo007 said:
Hi,
I have rooted DDLF2 (using CF-ROOT). Now that I no more need root (stopped using an app that needed root), I need to get back to stock DDLF2.
I have already unrooted it using recovery mode > unroot.zip method.
All I need is 100% samsung stock DDLF2 on the phone now, without the cf-kernel, cf-recovery and apps that the rooting process brought in.
Please advise...
Thanks
Click to expand...
Click to collapse
use the android development section and download the ddlf2 files then use odin to flash it
amsad said:
hi i flashed ddlf2 everything is working except my wifi is there any solution?
Click to expand...
Click to collapse
Maybe this happened because you didn't clean install so here are the steps:
Download XXKPE from here.
Flash XXKPE by following the XXKPE install instructions (the archive should contain odin3 v1.83 or v1.85 if not here is odin3 v1.85)
Download DDLF2 from here (DDMF1 is the latest value pack so it's smoother and with better battery life)
Install DDFL2 or DDMF1( recommended) by following the value pack instructions (use only odin3 v3.04)
that's it, enjoy your stock rom
if this helped you ...hit the thanks button pls