Database Info

Can't access to '/system/csc/GLB/system'

i was charging my phone, when i touched the phone it was very hot, it did not respond so i took out the battery and tried to boot but it just showed the samsung logo
i entered recovery tried to wipe cahce..ok done but while wiping data(reset) it stuck on Formatting /data
So i flashed again with the stock ROM with ODIN but then also its not booting..
I tried stock recovery as well as CWM recovery both not working
ok While FLASHING stock ROM after all rfs files are downloaded I get this error on phone's screen
Applied Multi-CSC
Multi-CSC : There are common apks
Copied thef default_wallpaper file.
Can't access to '/system/csc/GLB/system'
After that the phone does not boot..

Flash froyo first then 2.3.4 stock
Sent from my GT-S5670 using xda premium

ok While FLASHING stock ROM after all rfs files are downloaded I get this error on phone's screen
Applied Multi-CSC
Multi-CSC : There are common apks
Copied thef default_wallpaper file.
Can't access to '/system/csc/GLB/system'
After that the phone does not boot..

installed froyo successsfully
thanks samo

fz8975 said:
installed froyo successsfully
thanks samo
Click to expand...
Click to collapse
You're welcome
Sent from my GT-S5670 using xda premium

one more query
When i want to install new ROM (eg cynogen) i have to re download all my apps..is there any way to backup all apps ???

fz8975 said:
one more query
When i want to install new ROM (eg cynogen) i have to re download all my apps..is there any way to backup all apps ???
Click to expand...
Click to collapse
Use titanium backup the paid version. (Search out xda) or make a backup via cwm
Sent from my GT-S5670 using xda premium

a link for froyo download please?
samo_gf said:
Flash froyo first then 2.3.4 stock
Sent from my GT-S5670 using xda premium
Click to expand...
Click to collapse
can u post a link for froyo download please?i have exact the same problem

lucianssj said:
can u post a link for froyo download please?i have exact the same problem
Click to expand...
Click to collapse
I've read that sammobile is back again. So, u may check it. Otherwise, here's the only froyo which I found... I think it's Arabic version
Galaxy Fit Froyo 2.2.1
Note that I haven't tested it..!!
Hope this helps...!!!

Hm, i get this error (at least i think it is this exact error, i know it is something about CSC) when i install a stock ROM via Odin, but, it never caused any problems for me =)

[HELP] How to unroot and install trhe stock firmware?

Hi guys
I have a problem...i have rooted the galaxy s scl of my friend but now he want it unrooted.
I have the frankestain mod rom and i should unroot it and install a stock firmware..
How could i do it?

Flash kpe before flashing to another stock firmware such as kpu.
Sent from my GT-I9003 using xda premium

Flash XXKPE with Odin. The flash any other firmware of your choice

I still dont understand why everyone say to flash kpe first...
Seriously plz explain it to me !!
Sent from my GT-I9003 using xda app-developers app

Plz everyone here from the next time do this kind of chit-chat in general thread this is Development thread.
And for ans flash any stock rom using odin you will be unroot and on stovk rom too. For steps follow this thread.
http://forum.xda-developers.com/showthread.php?t=1133787

nicsptl said:
Plz everyone here from the next time do this kind of chit-chat in general thread this is Development thread.
And for ans flash any stock rom using odin you will be unroot and on stovk rom too. For steps follow this thread.
http://forum.xda-developers.com/showthread.php?t=1133787
Click to expand...
Click to collapse
I have done it but now in the phone there's only the bootanimation but nothing else...

G.Galante said:
I have done it but now in the phone there's only the bootanimation but nothing else...
Click to expand...
Click to collapse
you got bootloop, flash XXKPE+PIT it can solve your prob after flash that firmware,flash another stable firmware than XXKPE

simratcs said:
I still dont understand why everyone say to flash kpe first...
Seriously plz explain it to me !!
Sent from my GT-I9003 using xda app-developers app
Click to expand...
Click to collapse
Because kpe is came with full firmware that is (bootloader, pda, phone,csc)
And when you use pit file you need all these files
To unroot single pda file also works
If any problems facing then flash with pit+kpe
Correct me if I am wrong
Sent from my GT-I9003 using xda premium

why KPE+PIT
OK, first for all, we have 2 type of firmware.
1. one package .tar file.
2. component type firmware .tar file.
for one package type, you only see one tar file which are flash using odin place in the PDA box. this is the incremental patch from you current working phone. you find all the data still in place.
for the component type firmware, you will have 3 or 4 tar file to flash using odin and place it in respective box. you will need to reset you phone, all the data will gone.
so, why must using component type, if need to flash to stock. Becuase you already corropted the firmware.
1. you have change the recovery partition and rooted and with custome kernel.
2. you have converted to EXT4, (stock is rfs)
3. you have bootloop because the above you have done.
others which having same thing done but not at bootloop, its becuase their done the home work (search and read). this i'm very sure about it.
so, if you have the boot loop, mean you done some step wrong.
so to save you, follow the instruction on the link above you should be fine.
legend:
pit file - this is partition information table, to tell the odin and phone how to prepare the partition for flashing.
example: I9003_latona_20110114.pit
PDA tar: contant all the system partition.
example: I9003DXKF1-REV08-ALL-low-CL1020446.tar
CSC tar: contant of regional specified setting
example: GT-I9003-CSC-MULTI-OLBKB2.tar
Modem: contant the hardware setting.
example:MODEM_I9003DXKB2_REV_00_CL863799.tar
bootloader, do not use this, if you are not upgrading from Froyo to GB. as this is a very important portion of you phone. ( the name already tell you that, "boot" "loader") do not mass with it.
same as PC, when you infected by virus or you have done someting corrupted the file of windows, you will need a reformat or reinstall OS.
hence, for the phone, flash the KPE+PIT
same as PC, when you wanted to update the windows update, you will just click the update and the windows patch file will install, same as you flash the 1 package firmware.
that all, hope you can understant

chongns said:
why KPE+PIT
OK, first for all, we have 2 type of firmware.
1. one package .tar file.
2. component type firmware .tar file.
for one package type, you only see one tar file which are flash using odin place in the PDA box. this is the incremental patch from you current working phone. you find all the data still in place.
for the component type firmware, you will have 3 or 4 tar file to flash using odin and place it in respective box. you will need to reset you phone, all the data will gone.
so, why must using component type, if need to flash to stock. Becuase you already corropted the firmware.
1. you have change the recovery partition and rooted and with custome kernel.
2. you have converted to EXT4, (stock is rfs)
3. you have bootloop because the above you have done.
others which having same thing done but not at bootloop, its becuase their done the home work (search and read). this i'm very sure about it.
so, if you have the boot loop, mean you done some step wrong.
so to save you, follow the instruction on the link above you should be fine.
legend:
pit file - this is partition information table, to tell the odin and phone how to prepare the partition for flashing.
example: I9003_latona_20110114.pit
PDA tar: contant all the system partition.
example: I9003DXKF1-REV08-ALL-low-CL1020446.tar
CSC tar: contant of regional specified setting
example: GT-I9003-CSC-MULTI-OLBKB2.tar
Modem: contant the hardware setting.
example:MODEM_I9003DXKB2_REV_00_CL863799.tar
bootloader, do not use this, if you are not upgrading from Froyo to GB. as this is a very important portion of you phone. ( the name already tell you that, "boot" "loader") do not mass with it.
same as PC, when you infected by virus or you have done someting corrupted the file of windows, you will need a reformat or reinstall OS.
hence, for the phone, flash the KPE+PIT
same as PC, when you wanted to update the windows update, you will just click the update and the windows patch file will install, same as you flash the 1 package firmware.
that all, hope you can understant
Click to expand...
Click to collapse
That i already know man..
But why kpe first..
Does it like increases the battery life or what ??
Everyone says to flash kpe...
But what about ddkp3 ??
Sent from my GT-I9003 using xda app-developers app

simratcs said:
That i already know man..
But why kpe first..
Does it like increases the battery life or what ??
Everyone says to flash kpe...
But what about ddkp3 ??
Sent from my GT-I9003 using xda app-developers app
Click to expand...
Click to collapse
Kpe is the foundation of the other stock rom.

simratcs said:
That i already know man..
But why kpe first..
Does it like increases the battery life or what ??
Everyone says to flash kpe...
But what about ddkp3 ??
Sent from my GT-I9003 using xda app-developers app
Click to expand...
Click to collapse
no that "must" use KPE, it depend on your choose, as long as it is component type firmware, i use DXKF1, so far so good. and most importantly you can use it with pit file. note: 1 package tar file can not use with pit file.
if you want to solve the bootloop, either you do trouble shoot the rootcause, or close you eyes, and once and for all "reformat" your phone.
that why we need the pit.
hope you "already" know that.
BTW, i see no different on KPE on battery life. i use DXKP9 it is a GB, and flash Bam Kernel. battery life is good 1.5day per charge.

[Q] ODIN or Heimdall or CWM P6200 HELP

Sorry for being a BAD LUCK NOOOOB... I hav tried flashig roms in mobiles of my frnds and always succeeded... 1st time i tried it on my tab but failed... installed cmw.... backed up evrythng... but unable to wipe data.... its showing unable to mount data.... tried restoring but same error
Stuck wid CWM... now i was thnkng if i can try using odin... i downloaded firmware from sammobile.com
But i thot it wud b better to ask sm1 bfr i do it....
SHUD I ???
PLZ HELP ME

Why did u install cwm in the first place? To install CM10? If so, just flash CM10 anf see what happens.
If not successful, then flash the official firmware downloaded from sammobile.com using Odin and root and install cwm again following the procedures explained in the development section.
Sent from my GT-P6200 using xda app-developers app

i thnk i soft bricked it....
pins2u said:
Why did u install cwm in the first place? To install CM10? If so, just flash CM10 anf see what happens.
If not successful, then flash the official firmware downloaded from sammobile.com using Odin and root and install cwm again following the procedures explained in the development section.
Sent from my GT-P6200 using xda app-developers app
Click to expand...
Click to collapse
Dont want cm10 anymore... Just want my tab to bee BACK ALIVE :fingers-crossed::fingers-crossed::fingers-crossed:
Tried ODIN with official firmware downloaded from sammobile.com. Evrythng went fine. ODIN showed PASS also but jus like before still stuck at the boot logo... I got a pit file with ODIN from sammobiles named P6200.pit. But the firmware i got from sammobile was single .tar.md5 file. And before trying ODIN i read some 10 post and most of it tld not to use PIT wen using single file and to flash it in PDA slot. :fingers-crossed: So i dint use the pit. Only PDA... Did i do smthn wrng??
I have the stock recovery now and still can get into download mode... which makes me belive that i still have hope...
I have downloaded HONEYCOMB stock firmware and was planning to try it. coz i read in a post dat some kernel issue in new firmware is causing bricking in samsung devices.. dont knw if it affects my tab... hope u can help me out
http://forum.xda-developers.com/showthread.php?t=1756242
Recently i read from some post abt using PIT to recover soft bricked devices...
( http://forum.xda-developers.com/showthread.php?t=1667886 )
Since i dint purely understand it, i din try it yet.... Hope u can help me...
AND THANK YOU SO MUCH FOR REPLYING TO MY POST

What is the exact model name of your galaxy tab? There are a few variants of p6200.
I didnt use any pit file when I upgraded my tab from honeycomb to ics and had no issue at all.
Or, try to use firmware emergency recovery tool via Kies. Check out this link from page 7: http://www.sammobile.com/wp-content/uploads/2012/01/KIES-FAQ-update-your-phone.pdf
Sent from my GT-P6200 using xda app-developers app

I m Happy now
Thank you sir. My tab is back to life. I read about an emmc bricking. According to that some part of my internal memory in corrupted. So I had to re partition my internal memory. So, I used a custom PIT file. Now all is well.

maverix13 said:
Thank you sir. My tab is back to life. I read about an emmc bricking. According to that some part of my internal memory in corrupted. So I had to re partition my internal memory. So, I used a custom PIT file. Now all is well.
Click to expand...
Click to collapse
Oh, that was the case.. glad to hear that you solved your problem, sorry for not being a help after all.

[Q] How to revert back to stock DDLF2 from rooted state?

Hi,
I have rooted DDLF2 (using CF-ROOT). Now that I no more need root (stopped using an app that needed root), I need to get back to stock DDLF2.
I have already unrooted it using recovery mode > unroot.zip method.
All I need is 100% samsung stock DDLF2 on the phone now, without the cf-kernel, cf-recovery and apps that the rooting process brought in.
Please advise...
Thanks

Dude thats simple...
Just flash ddlf2 using odin and u are good to go !!
Sent from my GT-I9003

simratcs said:
Dude thats simple...
Just flash ddlf2 using odin and u are good to go !!
Sent from my GT-I9003
Click to expand...
Click to collapse
Yes, just clean flash and the root is gone
Sent from my GT-I9003 using Tapatalk 2

agnivo007 said:
Hi,
I have rooted DDLF2 (using CF-ROOT). Now that I no more need root (stopped using an app that needed root), I need to get back to stock DDLF2.
I have already unrooted it using recovery mode > unroot.zip method.
All I need is 100% samsung stock DDLF2 on the phone now, without the cf-kernel, cf-recovery and apps that the rooting process brought in.
Please advise...
Thanks
Click to expand...
Click to collapse
take the CR-ROOT zp file, open up with winrar, replace the file with DDLF2 normalboot.img, than flash with odin PDA. you will get back the stock kernel or maybe you will have boot looping, if not bootlooping, reboot the phone once, than factory reset.
try at your own risk.

chongns said:
take the CR-ROOT zp file, open up with winrar, replace the file with DDLF2 normalboot.img, than flash with odin PDA. you will get back the stock kernel or maybe you will have boot looping, if not bootlooping, reboot the phone once, than factory reset.
try at your own risk.
Click to expand...
Click to collapse
Dude i think he is a new member so dont tell him such stuff that is a bit confusing for a newbie...
Let him just clean flash ddlf2
Sent from my GT-I9003

flash xxkpe then ddlf2

karanmirchandani96 said:
flash xxkpe then ddlf2
Click to expand...
Click to collapse
Hi, can I flash xxkpe on CWM recovery mode and update to DDLF2 from kies?
Just wanted to know can stock ROMs can be flashed from CWM recovery, just like cROM.

No u have to flash them via Odin only.
sent from Samsung galaxy S i9003 Remics JB v3

Thanks for the Info!!!

THANKS!
Flashed via ODIN as PDA, did wipe, cache clean and now I'm set...

hi i flashed ddlf2 everything is working except my wifi is there any solution?

agnivo007 said:
Hi,
I have rooted DDLF2 (using CF-ROOT). Now that I no more need root (stopped using an app that needed root), I need to get back to stock DDLF2.
I have already unrooted it using recovery mode > unroot.zip method.
All I need is 100% samsung stock DDLF2 on the phone now, without the cf-kernel, cf-recovery and apps that the rooting process brought in.
Please advise...
Thanks
Click to expand...
Click to collapse
use the android development section and download the ddlf2 files then use odin to flash it

amsad said:
hi i flashed ddlf2 everything is working except my wifi is there any solution?
Click to expand...
Click to collapse
Maybe this happened because you didn't clean install so here are the steps:
Download XXKPE from here.
Flash XXKPE by following the XXKPE install instructions (the archive should contain odin3 v1.83 or v1.85 if not here is odin3 v1.85)
Download DDLF2 from here (DDMF1 is the latest value pack so it's smoother and with better battery life)
Install DDFL2 or DDMF1( recommended) by following the value pack instructions (use only odin3 v3.04)
that's it, enjoy your stock rom
if this helped you ...hit the thanks button pls

How to back to GB from CyanogenMod 10 alpha 4 by dhiru?

Hii guys,i already ask this in official thread of cm 10 by dhiru but i can't understand,i can't get what dhiru say about don't flash modem in odin,and here is the step if i want to go back from cm 10 or cm9 by dhiru
1.repartition from odin
2.took and the battery and place it
3.flash xxkpe pda,modem,bootloader,csc
4.wait until phone booting and reset all data(press *2767*3855# in dialpad)
5.flash xxkpe all file again
And that's the right procedure?
Sent from my GT-I9300 using xda premium

Please someone help me
Sent from my GT-I9003 using xda premium

For me, I directly flashed xxkpe (since it will repartition it self) the flashed stock xxkpm

chung1213 said:
For me, I directly flashed xxkpe (since it will repartition it self) the flashed stock xxkpm
Click to expand...
Click to collapse
without pit or with pit?:silly:

I'm not sure bro but what you mentioned is the right way to go back to GB. But im not sure what did Dhiru told you about modem. What im doing is i have my backup custom rom of GB. So if i want to go back to GB i just restore it from CWM.

dude, a very simple instruction from Dhiru, do not flash modem with odin, it will corrupt your partition of CM alpha 4 which is using MTP system.
Alfix, have explain that use adb push to push the modem.bin of your choose to the /radio partition if you face radio issue or use a CWM flash zip to flash in recovery mode.
so, due to the new mtp partition system introduce by Dhriu CM10 alpha 4, the odin will not be use to flash anything. including the custom kernel.
how to go back to stock? you need to use odin with pit file, Lalotion case is a accident.
1. makesure your odin can detect your phone....
2. flash pit file first or together with XXKPE tar with or without bootloader. DON'T tell me it wont work, me and most of the member have done that, IT WORK!!
3. after flash KPE, your phone will reboot as normal.

marshygeek said:
I'm not sure bro but what you mentioned is the right way to go back to GB. But im not sure what did Dhiru told you about modem. What im doing is i have my backup custom rom of GB. So if i want to go back to GB i just restore it from CWM.
Click to expand...
Click to collapse
ok i have tooo many full backup on my pc

marshygeek said:
I'm not sure bro but what you mentioned is the right way to go back to GB. But im not sure what did Dhiru told you about modem. What im doing is i have my backup custom rom of GB. So if i want to go back to GB i just restore it from CWM.
Click to expand...
Click to collapse
Your method is quite confuaing me. For doing restore kernel.should be same which was used at the time of backup. GB kernel is entirely different from cm10 kernel. Then how u restore it??

vishal24387 said:
Your method is quite confuaing me. For doing restore kernel.should be same which was used at the time of backup. GB kernel is entirely different from cm10 kernel. Then how u restore it??
Click to expand...
Click to collapse
so just xxkpe+pit and i have another question,i can't access my usb stroge to copy files from my pc to my phone :crying:

MR.Volkf said:
so just xxkpe+pit and i have another question,i can't access my usb stroge to copy files from my pc to my phone :crying:
Click to expand...
Click to collapse
Before you have flashed pit + xxkpe or after?

vishal24387 said:
Your method is quite confuaing me. For doing restore kernel.should be same which was used at the time of backup. GB kernel is entirely different from cm10 kernel. Then how u restore it??
Click to expand...
Click to collapse
Vishal, u r right.
Restore from cwm just wont work cause partition format just wont right.
Sent from my GT-I9003 using Tapatalk 2

vishal24387 said:
Your method is quite confuaing me. For doing restore kernel.should be same which was used at the time of backup. GB kernel is entirely different from cm10 kernel. Then how u restore it??
Click to expand...
Click to collapse
But he just asked how to go to GB rom. Im doing this from the beginning. Is this bad? I got no issue so far.

I made an udate for my XPERIA S rom but i dont have signals tried loscounts method too,before releasing my rom I want to test my gsm ,Can anyone explain me step by step clearly how should I go back to KPU as base.

Vasishta Reddy said:
I made an udate for my XPERIA S rom but i dont have signals tried loscounts method too,before releasing my rom I want to test my gsm ,Can anyone explain me step by step clearly how should I go back to KPU as base.
Click to expand...
Click to collapse
But i think you must
1.flash xxkpe+pit
2.flash xxkpu
And then full wipe
Sent from my GT-I9003 using xda premium

chongns said:
dude, a very simple instruction from Dhiru, do not flash modem with odin, it will corrupt your partition of CM alpha 4 which is using MTP system.
Alfix, have explain that use adb push to push the modem.bin of your choose to the /radio partition if you face radio issue or use a CWM flash zip to flash in recovery mode.
so, due to the new mtp partition system introduce by Dhriu CM10 alpha 4, the odin will not be use to flash anything. including the custom kernel.
how to go back to stock? you need to use odin with pit file, Lalotion case is a accident.
1. makesure your odin can detect your phone....
2. flash pit file first or together with XXKPE tar with or without bootloader. DON'T tell me it wont work, me and most of the member have done that, IT WORK!!
3. after flash KPE, your phone will reboot as normal.
Click to expand...
Click to collapse
Thanks this works for me :good:
Edit:-one thing should i flash kpu with pit ?

if wanna revert from what so ever custom rom back to gb... just flash kpe+pit.. after that just flash whtso ever stock gb rom u want.. no need for flashing pit again. pit once with kpe and your done re-partitioning..
Sent from my GT-I9003 using xda app-developers app

MR.Volkf said:
so just xxkpe+pit and i have another question,i can't access my usb stroge to copy files from my pc to my phone :crying:
Click to expand...
Click to collapse
try flash pit first till you get blank screen->remove usb cable and battery->flash xkpe twice->factory reset->flash ddlf2 twice->factory reset.
i always do that step if want to back to gb or go for ics/jb.never have any issue.hope this will help u.