Related
I have updated my baseband to V20D can any tell me that can i go for Flashing CM9 ICS 4.0.4 which is more stable(HEHAPPY). I mean that will there be any problem with V20D.?? I updated it officially From Lg Care center..!! PLZ tell me can i go ICS 4.0.4 (HEHAPPY) Plz tell anyone? Will my Phone Search the Network? And After This basebanding Process what will i have to do now??? ASAP thnx in adv.!!
Every V20? baseband is the new baseband, which means your baseband is compatible. First you need root access, custom recovery and then just flash the latest CM9 build by hephappy. Now you're done! Enjoy CM9
Again, you can flash CM9
fd1999 said:
Every V20? baseband is the new baseband, which means your baseband is compatible. First you need root access, custom recovery and then just flash the latest CM9 build by hephappy. Now you're done! Enjoy CM9
Again, you can flash CM9
Click to expand...
Click to collapse
Hey Bro Thnx first of all!! Now Done With the Rooting!! plz tell me i have installed CWM on my phone copied all the files Gapps and Hehappy update!!
Now how to start?
First update Cwm?? what to select? plz tell !!
It's on thread, 'Installation', but here it is anyway:
1. Shutdown your phone
2. Press the following buttons for at least 5 seconds to enter recovery:
HOME+Vol(-)+POWER
3. Do a full nandroid backup:
Backup and storage>backup
4. Press BACK-button
5. Wipe all data/Factory reset
6. Press BACK-button
7. Advanced> Wipe Dalvik Cache and battery stats
8. Press BACK-button
9. Mounts and storage> Format system and boot
10. Press BACK-button
11. Install zip>choose zip from sdcard and select the update by hephappy
12. Install and wait
13. Press BACK-button
14. Reboot
After your phone started, reboot into recovery again, to install GApps (Play Store...)
1. Reboot into recovery
2. Install zip from sdcard>choose zip from sdcard and select GApps you've downloaded
3. Install and wait
4. Reboot
All done!
Thread: http://forum.xda-developers.com/showthread.php?t=1614420
Gesendet von meinem LG-P500 mit Tapatalk 2
Hey bro i knw this process.. before i have installed cwm. Now by opening will i have to update it? ? There are two options lg optimus p500 and lg optimus old bb. I m askng it because i have seen this step somewhere. I know installing steps fully i have watched tons of videos but plz tell me the pre reqvitees. And 1 more query i m using gb 2.3.3 that came with the baseband v20D my question is after installing cm9 ics 4.0.4 hehappy. Will i be able to come back to 2.3.3? If cm9 proved laggy or unstable to me?? Plz rply to both my queries. Detaild manner. Thnx in adv.
Sau123 said:
Hey bro i knw this process.. before i have installed cwm. Now by opening will i have to update it? ? There are two options lg optimus p500 and lg optimus old bb. I m askng it because i have seen this step somewhere. I know installing steps fully i have watched tons of videos but plz tell me the pre reqvitees. And 1 more query i m using gb 2.3.3 that came with the baseband v20D my question is after installing cm9 ics 4.0.4 hehappy. Will i be able to come back to 2.3.3? If cm9 proved laggy or unstable to me?? Plz rply to both my queries. Detaild manner. Thnx in adv.
Click to expand...
Click to collapse
I think you have installed ROM Manager, now you get two options, one is 'LG P500'
which installs Clockwork Mod Recovery 5.0.2.7 and other is 'LG P500 Old BB' which installs CWM 5.0.2.0. As per my personal experiences CWM 5.0.2.0 is more stable.
After installing CWM now you can create backups, flash new ROMs etc.
Before flashing ICS, you should backup current stock ROM so that you can always restore in case something goes wrong.
Hey bro plz tell me that after installing ics can i go back to my old rom i.e 2.3.3 if i m not happy with it..??
Have you read last para of my post? It says if you made backup of current rom, you can always restore it.
Sent from my LG-P500 using xda app-developers app
myawan said:
I think you have installed ROM Manager, now you get two options, one is 'LG P500'
which installs Clockwork Mod Recovery 5.0.2.7 and other is 'LG P500 Old BB' which installs CWM 5.0.2.0. As per my personal experiences CWM 5.0.2.0 is more stable.
After installing CWM now you can create backups, flash new ROMs etc.
Before flashing ICS, you should backup current stock ROM so that you can always restore in case something goes wrong.
Click to expand...
Click to collapse
ClockworkMod Recovery for old baseband of our P500 works with new baseband too?
Sent from my LG-P500 using xda premium
And plzzz tell me how does a topic come under 'favourites' section of the xda premium app??? Such a stupid question but I am really not finding a way out!!! 
Sent from my LG-P500 using xda premium
Yes you can, recovery is not related to BB.
Secondly open your desired topic, press menu button and select 'subscribe'.
I just want to ask how to flash cm10 alpha 4 and other cm10 alpha 4 rom. Is it the same step to flash alpha 3??
Sent from my GT-I9003 using xda premium
1.cf root
2.wipe data,cache,dalvik cache
3.flash cm10 a4
Don't reboot
4.flash gapps
5.Reboot
6.wait until 5 minutes
7.final reboot
Sent from my GT-I9003 using xda premium
Thanks
Sent from my GT-I9003 using xda premium
problem while flashing CM10 Alpha 4
MR.Volkf said:
1.cf root
2.wipe data,cache,dalvik cache
3.flash cm10 a4
Don't reboot
4.flash gapps
5.Reboot
6.wait until 5 minutes
7.final reboot
Sent from my GT-I9003 using xda premium
Click to expand...
Click to collapse
while the CM10 Alpha4 rom package (by dhiru1602) is installing that is during step 3 according to the steps mentioned above , the phone suddenly reboots into recovery again n then the installation process stops......giving a bunch of 5 to 6 errors on the screen..errors like "cannot mount".....pls help.....thank you....
fraaz7777 said:
while the CM10 Alpha4 rom package (by dhiru1602) is installing that is during step 3 according to the steps mentioned above , the phone suddenly reboots into recovery again n then the installation process stops......giving a bunch of 5 to 6 errors on the screen..errors like "cannot mount".....pls help.....thank you....
Click to expand...
Click to collapse
Flash CM10 Alpha4 again(it's normal ...need to flash twice when install Alpha4 first time)
wee2wee said:
Flash CM10 Alpha4 again(it's normal ...need to flash twice when install Alpha4 first time)
Click to expand...
Click to collapse
thanx for the advice.....will try as u said...n let u know if it worked this time...
fraaz7777 said:
while the CM10 Alpha4 rom package (by dhiru1602) is installing that is during step 3 according to the steps mentioned above , the phone suddenly reboots into recovery again n then the installation process stops......giving a bunch of 5 to 6 errors on the screen..errors like "cannot mount".....pls help.....thank you....
Click to expand...
Click to collapse
The same happened with me as well. Don't worry, just flash the CM10 Alpha4 rom package (by dhiru1602) again. Do give review about your battery backup.
Same instrcutions too flash from alpha 3?
felaipes said:
Same instrcutions too flash from alpha 3?
Click to expand...
Click to collapse
ya....same instructions almost
Stock ROM
1. Flash CWM Compatible Kernel (CF ROOT)
2. Reboot to Recovery.
3. Wipe Data / Factory Reset.
4. Select the ROM zip from your SD Card and flash.
5. Go to Advanced -> Reboot Recovery.
6. Mounts and Storage -> Format dbdata
7. Flash Google Apps.
8. Reboot
Any other AOSP ROM (CM7/MIUI/CM9)
1. Reboot to Recovery.
3. Wipe Data / Factory Reset.
4. Select the ROM zip from your SD Card and flash.
5. Go to Advanced -> Reboot Recovery.
6. Mounts and Storage -> Format dbdata
7. Flash Google Apps.
8. Reboot
Upgrading from previous versions of CM10
1. Reboot to Recovery.
2. Select the ROM zip from your SD Card and flash.
3. Flash Google Apps.
4. Reboot
---------- Post added at 05:20 PM ---------- Previous post was at 05:16 PM ----------
wee2wee said:
Flash CM10 Alpha4 again(it's normal ...need to flash twice when install Alpha4 first time)
Click to expand...
Click to collapse
thanx.....CM10 alpha4 now works......
---------- Post added at 05:25 PM ---------- Previous post was at 05:20 PM ----------
samgsl said:
The same happened with me as well. Don't worry, just flash the CM10 Alpha4 rom package (by dhiru1602) again. Do give review about your battery backup.
Click to expand...
Click to collapse
ya....it worked after re flashing.....battery is almost the same as CM10 alpha3....well I mostly use Wifi.....for 4 hrs around everyday n some texts n calls.....some videos for bout 4 hrs on MXplayer......all of that n at the end of the day battery is around 10% remaining....
flash remics
did any body know how 2 flash remiics v3.1
glad07 said:
did any body know how 2 flash remiics v3.1
Click to expand...
Click to collapse
--Flash CM10A4 first
--Do Not Reset/Wipe
--Flash Remics v3.1
--Flash GAPPS
--reboot
The steps for CM10 alpha 4 installation r mentioned above by me.......press the thank button (+1) if I helped. ....
Quick question, good or best kernel for alpha 3?
I dont think i`ll flash alpha 4, seems like it has random problems, and just wanted to flash it for
The improvements that adi kernel brought
felaipes said:
Quick question, good or best kernel for alpha 3?
I dont think i`ll flash alpha 4, seems like it has random problems, and just wanted to flash it for
The improvements that adi kernel brought
Click to expand...
Click to collapse
Alpha 4 is an improved version over Alpha3(just need to go back to pit when you want to switch roms other than Alpha4)..I'm currently on "Dhiru's CyanogenMod 10 for Samsung Galaxy SL - Alpha 4 - Farewell Release" with "Crackerizer's CrackerizerKernel - Final" plus "loSconosciuto's Optimized Samsung battery driver"..so far so good, better battery as well
does anybody know how to get back to stock I9003DDLF2 (2.3.6)
i'm currently on CM10 Alpha4 by Dhiru 1602......pls help with proper instructions......n how to use Odin for that.....
4 file firmware like xxkpe then flash to ddlf2
Sent from my GT-I9003 using xda app-developers app
fraaz7777 said:
does anybody know how to get back to stock I9003DDLF2 (2.3.6)
i'm currently on CM10 Alpha4 by Dhiru 1602......pls help with proper instructions......n how to use Odin for that.....
Click to expand...
Click to collapse
why do u want to go back to stock?
share your experience with alpha 4, i love alpha 3, its great, but the battery life could be better
BassBlaster said:
4 file firmware like xxkpe then flash to ddlf2
Sent from my GT-I9003 using xda app-developers app
Click to expand...
Click to collapse
I believe you need to flash 2 files only to back to kpe
1. Kpe (select in pda only in Odin1.83 ) + 2. Pit , no bootloader file is needed .
somebody correct me if i am wrong , but i successfully reflashed from kpe to a4 to jellybam
( Read Dhiru's A4 post , quote "
1. This ROM will wipe data due to different partitioning. The device would reboot while flashing and resume again.
2. Once on this ROM, the most effective way of going back to any other ROM would be to repartition from Odin.
3. While converting the filesystem, your efs that has your IMEI is backed up to /emmc/backup/efs. Keep a backup on your PC just in case.
4. Incase if you don't get a network signal, check if your IMEI and Baseband are proper. If not, go back to stock and try again.
5. Do NOT use Odin to flash Modems. Due to different partitions, Odin will screw up your existing MTD setup. " )
or Lola's real story (our great contributor porting roms for us)
http://forum.xda-developers.com/showthread.php?t=2048672
glad07 said:
did any body know how 2 flash remiics v3.1
Click to expand...
Click to collapse
1. Do Nandroid backup
2. Do a factory reset/data wipe.
3. Install the ROM.
4. Install Gapps for JB.
5. Reboot (automatically).
6. Wait till full boot of your phone.
7.Enjoy
Hi....
I am not from here.... Am from dhd section...
I got a galaxy R......
So I would have some questions regarding flashing and ROMs....
1. Can someone suggest some stable ics ROMs? ? Most of the ics ROMs are inactive now..... So I can't choose any...
2. Can I install 4 ext recovery?
It's simple and touch recovery too...
3. If I can't change cmw recovery what are things I should format before flashing a rom.... And where can I find the options I mean under which category in recovery...
All I see is factory reset and format cache...
Thanks in advance...
Rk.....
Sent From The Future.....
rohithksaj said:
Hi....
1. Can someone suggest some stable ics ROMs? ? Most of the ics ROMs are inactive now..... So I can't choose any...
Click to expand...
Click to collapse
Flash [ROM] [4.0.4] [ZCLPD] Angeeks_I9103+A6900_Lv5_4.0.4 ROM..Most stable ICS ROM
2. Can I install 4 ext recovery?
It's simple and touch recovery too...
Click to expand...
Click to collapse
Yes. [i9103][CWM Advanced Edition] PhilZ Touch is recommended.
3. If I can't change cmw recovery what are things I should format before flashing a rom.... And where can I find the options I mean under which category in recovery...
All I see is factory reset and format cache...
Click to expand...
Click to collapse
Stock recovery doesnt come up with more options.
your need to flash any other recovery to install ROMs.
Visit this link for guidance..
Nikhil said:
Flash [ROM] [4.0.4] [ZCLPD] Angeeks_I9103+A6900_Lv5_4.0.4 ROM..Most stable ICS ROM
Yes. [i9103][CWM Advanced Edition] PhilZ Touch is recommended.
Stock recovery doesnt come up with more options.
your need to flash any other recovery to install ROMs.
Visit this link for guidance..
Click to expand...
Click to collapse
thanks ...one more doubt...
am on jellybeer now.....
so all i have to do is wipe and flash right ???
what all i have to wipe ????
rohithksaj said:
thanks ...one more doubt...
am on jellybeer now.....
so all i have to do is wipe and flash right ???
what all i have to wipe ????
Click to expand...
Click to collapse
yes, you need to wipe all things first (i.e. data,system & Caches) & Then flash ICS Stock ROM first coz of stability issues.
Disturbed™ said:
yes, you need to wipe all things first (i.e. data,system & Caches) & Then flash ICS Stock ROM first coz of stability issues.
Click to expand...
Click to collapse
Please give me the link to the stock...sorry I can't find in development section.......
Thanks a lot for the reply..
Sent from my GT-I9103 using xda app-developers app
rohithksaj said:
Please give me the link to the stock...sorry I can't find in development section.......
Thanks a lot for the reply..
Click to expand...
Click to collapse
Here you go..
2nd Post in [FIRMWARE] Stock Samsung Firmwares for Galaxy R
Nikhil said:
Here you go..
2nd Post in [FIRMWARE] Stock Samsung Firmwares for Galaxy R
Click to expand...
Click to collapse
Ok now all I have to do is wipe everything. Flash stock. Wipe everything flash the rom.... Right?
Sent from my GT-I9103 using xda app-developers app
rohithksaj said:
Ok now all I have to do is wipe everything. Flash stock. Wipe everything flash the rom.... Right?
Sent from my GT-I9103 using xda app-developers app
Click to expand...
Click to collapse
yes,
follow these steps.
0. copy zip file of Rom, Gapps(if required by rom), Ardatdat's kernel into your sdcard
1. wipe data/factory reset(along with dalvik cache)
2. flash stock firmware using odin (probably you'll experience boot loop)
3. flash CWM using odin
4. flash Ardatdat's kernel
5. perform factory reset(along with dalvik cache)
6. flash rom and gapps
Done..!
Nikhil said:
yes,
follow these steps.
0. copy zip file of Rom, Gapps(if required by rom), Ardatdat's kernel into your sdcard
1. wipe data/factory reset(along with dalvik cache)
2. flash stock firmware using odin (probably you'll experience boot loop)
3. flash CWM using odin
4. flash Ardatdat's kernel
5. perform factory reset(along with dalvik cache)
6. flash rom and gapps
Done..!
Click to expand...
Click to collapse
ok....thanks......
what happens if i skip the flashing stock step...i mean if i flash directly from jellybeer to the frankenstains mod by only doing factory reset and wiping caches ?????
And wiping caches and factory reset will do everything? Don't we have to wipe system and other things.?
And I don't like touch wiz... So can u please suggest a stable ics rom that runs without touch wiz?
I checked cyanogen... But no stable rc releases for this device.....
Thanks in advance...
rohithksaj said:
what happens if i skip the flashing stock step...i mean if i flash directly from jellybeer to the frankenstains mod by only doing factory reset and wiping caches ?????
And I don't like touch wiz... So can u please suggest a stable ics rom that runs without touch wiz?
I checked cyanogen... But no stable rc releases for this device.....
Click to expand...
Click to collapse
Yes, above steps are just to be on safe side. You can install frankenstains mod after factory reset and wiping dalvik caches and skip mentioned step..
I thought you wanted stock ics.
AFAIK there isnt any stable custom ics rom. for stable rom you need to adjust with touchwiz only.
You can always install a custom launcher, like Nova or Apex which give a pure AOSP feel.
Nikhil said:
Yes, above steps are just to be on safe side. You can install frankenstains mod after factory reset and wiping dalvik caches and skip mentioned step..
I thought you wanted stock ics.
AFAIK there isnt any stable custom ics rom. for stable rom you need to adjust with touchwiz only.
Click to expand...
Click to collapse
ok....so this is what i am going to do as you said...
full wipe....
Install stock ics using odin....
Flash CWM using odin
Download the ZIp
Flash it using CWM.
isnt it ???
i understood how to flash the rom via odin but not recovery...
tell me how......
Adam77Root said:
You can always install a custom launcher, like Nova or Apex which give a pure AOSP feel.
Click to expand...
Click to collapse
i know...but it will make 2 launchers ....Touch wiz and the Apex....it irritates me a bit....
rohithksaj said:
ok....so this is what i am going to do as you said...
full wipe....
Install stock ics using odin....
Flash CWM using odin
Download the ZIp
Flash it using CWM.
isnt it ???
Click to expand...
Click to collapse
not exactly, first you need to download the zip file of ardatdat kernel and custom rom you want to flash and keep it into sdcard before performing any steps as mentioned 0th step in this post and then flash stock ics
i understood how to flash the rom via odin but not recovery...
tell me how......
Click to expand...
Click to collapse
after flashing CWM (say v4.0.0.2) you will get an option "install zip from sdcard" in recovery mode(hope you know the key combination to enter into recovery mode) click on it and browse to the directory in which you kept kernel and rom
click on zip file of kernel and flash it
same way install rom.
hope you are clear now..
i know...but it will make 2 launchers ....Touch wiz and the Apex....it irritates me a bit....
Click to expand...
Click to collapse
you can set any launcher to default, touchwiz launcher wont interrupt again!
Nikhil said:
not exactly, first you need to download the zip file of ardatdat kernel and custom rom you want to flash and keep it into sdcard before performing any steps as mentioned 0th step in this post and then flash stock ics
after flashing CWM (say v4.0.0.2) you will get an option "install zip from sdcard" in recovery mode(hope you know the key combination to enter into recovery mode) click on it and browse to the directory in which you kept kernel and rom
click on zip file of kernel and flash it
same way install rom.
hope you are clear now..
you can set any launcher to default, touchwiz launcher wont interrupt again!
Click to expand...
Click to collapse
one more problem
i installed [ROM] [4.0.4] [ZCLPD] Angeeks_I9103+A6900_Lv5_4.0.4 ROM
but its chinese....
how to change the language ??
rohithksaj said:
one more problem
i installed [ROM] [4.0.4] [ZCLPD] Angeeks_I9103+A6900_Lv5_4.0.4 ROM
but its chinese....
how to change the language ??
Click to expand...
Click to collapse
Settings -> Language & Inputs -> change it to English (Just go by the icons)....
rohithksaj said:
one more problem
i installed [ROM] [4.0.4] [ZCLPD] Angeeks_I9103+A6900_Lv5_4.0.4 ROM
but its chinese....
how to change the language ??
Click to expand...
Click to collapse
Follow the icon of Language and Input and click on language, select English then..
Done....
Anyway to remove the Chinese comment while making the call?
Sent from my GT-I9103 using xda app-developers app
rohithksaj said:
Done....
Anyway to remove the Chinese comment while making the call?
Sent from my GT-I9103 using xda app-developers app
Click to expand...
Click to collapse
Delete the CC app.
Adam77Root said:
Delete the CC app.
Click to expand...
Click to collapse
Done... Everything is going nice and easy...
Thanks all for your support and replies......
:thumbup::thumbup::thumbup:
Sent from the future........
Hi Guys
Im newer to this
I rooted my galaxy fit and then with the help of ROM manager I accessed CWM , then I tried to install custom ROM ,,, after rebooting phone stuck with white text android
Please simebody help me solve this
Sent from my GT-P3100 using xda app-developers app
Wipe data/reset
Wipe dalvik cache
Wipe cache
goto mounts & storage and format system
Flash the rom again
Wipe data
Reboot
Harpratap said:
Wipe data/reset
Wipe dalvik cache
Wipe cache
goto mounts & storage and format system
Flash the rom again
Wipe data
Reboot
Click to expand...
Click to collapse
I did like u said
But no luck
Its still showing white android text in boot screen
Im able to go to download mod and recovery mod but I dont know whats happening ....
Sent from my GT-P3100 using xda app-developers app
glsnjoseph said:
I did like u said
But no luck
Its still showing white android text in boot screen
Im able to go to download mod and recovery mod but I dont know whats happening ....
Sent from my GT-P3100 using xda app-developers app
Click to expand...
Click to collapse
Have patience,wait for 10-15 minutes.
First of all, you shouldn't have used Rom manager. It bricks our device
Read the guide in the top of general section and install a proper recovery from odin.
Maybe the zip you have downloaded is corrupted. So download it again and try.
Make sure you are on official gingerbread(2.3.x) and not froyo(2.2)
If none of this works,there is something seriously wrong with your device.
But don't worry,you can flash stock via odin and revert back to factory state.
Harpratap said:
Have patience,wait for 10-15 minutes.
First of all, you shouldn't have used Rom manager. It bricks our device
Read the guide in the top of general section and install a proper recovery from odin.
Maybe the zip you have downloaded is corrupted. So download it again and try.
Make sure you are on official gingerbread(2.3.x) and not froyo(2.2)
If none of this works,there is something seriously wrong with your device.
But don't worry,you can flash stock via odin and revert back to factory state.
Click to expand...
Click to collapse
First of all let me thankyou for support
I have tried 2-3ROMs but none of them works for me...
I searched a lot to find how to flash ROM via odin but unfortunately I didnt find anyn useful thread.
Can u send a link of odin flashing method ,
Sent from my GT-P3100 using xda app-developers app
glsnjoseph said:
First of all let me thankyou for support
I have tried 2-3ROMs but none of them works for me...
I searched a lot to find how to flash ROM via odin but unfortunately I didnt find anyn useful thread.
Can u send a link of odin flashing method ,
Sent from my GT-P3100 using xda app-developers app
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1606380 -All in one guide (read it thoroughly)
^flashing stock rom
^flashing CWM
And try Jana rom,official cm7, minicm7 at first because they boot very fast
And you cannot flash roms via odin. Odin is only for flashing stock firmware and recovery
I read that with 4 file package we can flash ROM (Official ) via odin,
In my case do I need to flash official firmware and then try Custom ROM or not
Kindly send a link to download 4 file package of stock firware
Unable to download from samfirmware.com
Sent from my GT-P3100 using xda app-developers app
You can download sock firmware from SAMMOBILE site. It is an open source website where you can download all samsung phone's official stock firmware.
Hit thanks if I help
Sent from cooperve.
glsnjoseph said:
I read that with 4 file package we can flash ROM (Official ) via odin,
In my case do I need to flash official firmware and then try Custom ROM or not
Kindly send a link to download 4 file package of stock firware
Unable to download from samfirmware.com
Sent from my GT-P3100 using xda app-developers app
Click to expand...
Click to collapse
Link firmware with 4 files:
http://www.hotfile.com/dl/168101698/7eed3f5/S5670XWKTI_S5670DBTKT1_DBT.zip.html
The right click on ODIN and this:
Thanxs
I did iy with stock firmware downloaded from samfirmware.com
Now Im on syock firmware
Tried to install custom ROMS, but no luck still same problem android white text......
Sent from my GT-P3100 using xda app-developers app
glsnjoseph said:
Thanxs
I did iy with stock firmware downloaded from samfirmware.com
Now Im on syock firmware
Tried to install custom ROMS, but no luck still same problem android white text......
Sent from my GT-P3100 using xda app-developers app
Click to expand...
Click to collapse
Not say thanx hit thanx button.
Hit thanks if I help
Sent from cooperve.
glsnjoseph said:
Thanxs
I did iy with stock firmware downloaded from samfirmware.com
Now Im on syock firmware
Tried to install custom ROMS, but no luck still same problem android white text......
Sent from my GT-P3100 using xda app-developers app
Click to expand...
Click to collapse
Which customize ROM?
For customize ROM you need with ODIN instal Clockwork Mod Recovery (CWM).
http://forum.xda-developers.com/showthread.php?t=1339640
Now you can install custom ROM. Go in CWM and go on wipe data reset, wipe cashe partition in Advanced wipe dalvik cashe. Install ROM and again go on wipe data reset, wipe cashe partition and in Advanced, go on wipe dalvik cashe. Reboot phone. It need wait about 5 minutes for system up.
ZmisiS said:
Which customize ROM?
For customize ROM you need with ODIN instal Clockwork Mod Recovery (CWM).
http://forum.xda-developers.com/showthread.php?t=1339640
Now you can install custom ROM. Go in CWM and go on wipe data reset, wipe cashe partition in Advanced wipe dalvik cashe. Install ROM and again go on wipe data reset, wipe cashe partition and in Advanced, go on wipe dalvik cashe. Reboot phone. It need wait about 5 minutes for system up.
Click to expand...
Click to collapse
Dude I tried like that only , installed CWM with odin
But I have no idea whats wrong with my phone
I tried Jellybread and jana ROM but after flashing JanaROM its showed JanaROM boot image but nothing happened..
Sent from my GT-P3100 using xda app-developers app
glsnjoseph said:
Dude I tried like that only , installed CWM with odin
But I have no idea whats wrong with my phone
I tried Jellybread and jana ROM but after flashing JanaROM its showed JanaROM boot image but nothing happened..
Sent from my GT-P3100 using xda app-developers app
Click to expand...
Click to collapse
I don't know because I not used Jellybread, and not I used Jana ROM. I used CM10.1.4 from here:
http://jenkins.androidarmv6.org/job/android/457/
glsnjoseph said:
Dude I tried like that only , installed CWM with odin
But I have no idea whats wrong with my phone
I tried Jellybread and jana ROM but after flashing JanaROM its showed JanaROM boot image but nothing happened..
Sent from my GT-P3100 using xda app-developers app
Click to expand...
Click to collapse
When u are flashing any custom rom over the stock rom for the 1st time then u *should* necessarily wipe /system otherwise you'll get hanged up forever on that android-text/boot-up screen.
Galaxy_Rohit said:
When u are flashing any custom rom over the stock rom for the 1st time then u *should* necessarily wipe /system otherwise you'll get hanged up forever on that android-text/boot-up screen.
Click to expand...
Click to collapse
Actually I tried all the way dude
Googled a lot to find a solution but didnt find anything useful.
I tried to flash CM 10.1 but it shows booting but nothing else..
Only boot image ,,,,,,
But Im not ready to give up
Here I will explain the whole thing I did
1.I rooted my phone with help of update zip
2.I connected phone to computer in download mode and flashed CWM recovery via odin,, in that I selected ops tag and then one package with cwm.
3.after flashing CWM via odin , I entered into CWM mode by pressing Ok button +power on button.
4.I wiped data, cache, dalvik cache, formatted system
5.Install zip from sd card and selected my Custom ROM
6.AGAIN Wiped data, cache, , dalvikcache
7.Rebooted
Then It stucks in boot image or blank screen and sometimes in white android text...
Hope somebody can help me now
Sent from my GT-P3100 using xda app-developers app
glsnjoseph said:
Actually I tried all the way dude
Googled a lot to find a solution but didnt find anything useful.
I tried to flash CM 10.1 but it shows booting but nothing else..
Only boot image ,,,,,,
But Im not ready to give up
Here I will explain the whole thing I did
1.I rooted my phone with help of update zip
2.I connected phone to computer in download mode and flashed CWM recovery via odin,, in that I selected ops tag and then one package with cwm.
3.after flashing CWM via odin , I entered into CWM mode by pressing Ok button +power on button.
4.I wiped data, cache, dalvik cache, formatted system
5.Install zip from sd card and selected my Custom ROM
6.AGAIN Wiped data, cache, , dalvikcache
7.Rebooted
Then It stucks in boot image or blank screen and sometimes in white android text...
Hope somebody can help me now
Sent from my GT-P3100 using xda app-developers app
Click to expand...
Click to collapse
Stock ROM work on your phone?
Bro! Goto "mounts & storage" & select "format /system"...(if u haven't done yet). Then try flashing custom rom. & always use cwm recovery by tjstyles v5.0.2.7
Let's hope for the best...:thumbup:
Galaxy_Rohit said:
Bro! Goto "mounts & storage" & select "format /system"...(if u haven't done yet). Then try flashing custom rom. & always use cwm recovery by tjstyles v5.0.2.7
Let's hope for the best...:thumbup:
Click to expand...
Click to collapse
Ya I have done that too
Formatted system from mounts and storage
Stock ROM works for me
Im on CWM 5.0.2.7
Sent from my GT-P3100 using xda app-developers app
glsnjoseph said:
Ya I have done that too
Formatted system from mounts and storage
Stock ROM works for me
Im on CWM 5.0.2.7
Sent from my GT-P3100 using xda app-developers app
Click to expand...
Click to collapse
Do this straight away:-
1. Flash Froyo 2.2.1(4 package) of ur country.
2. Then flash Gingerbread 2.3.6(one package) of ur country.
3. Then flash cwm via Odin.
4. Flash the custom rom thereafter.
Since it seems a bit complex issue, u need to try this to ensure zero errors.:sly: Btw u can try above steps in ur spare time.
As for me, I always try all methods that I know b4 concluding anything.
CM11 by m4jonez
http://forum.xda-developers.com/android/development/cm11-samsung-galaxy-s-duos-kitkat-4-4-4-t3024762
CM11 by m4jonez needed TWRP 2.7 to flash. However using the CWM attatched in this thread, you can flash CM11 on s7562. TWRP was not loading on some phones so this is an alternative. Leave a thanks if this helped
and thanks to @ m4jonez for developing CM11 for our device :good::good:
Instructions
1 flash the stock ROM given in the cm11 thread
2 wipe data, cache and dalvik cache
3 flash the above file using odin3
4 reboot to CWM recovery and flash CM11
Screenshots are attatched
PS: Sorry for crappy quality;My ace doesn't have a good camera
Click on the thanks button for a satisfying 'click' sound( touchscreen users enjoy the feel of your finger on the thanks button)
:thumbup:
niyogro said:
CM11 by m4jonez
http://forum.xda-developers.com/android/development/cm11-samsung-galaxy-s-duos-kitkat-4-4-4-t3024762
CM11 by m4jonez needed TWRP 2.7 to flash. However using the CWM attatched in this thread, you can flash CM11 on s7562. TWRP was not loading on some phones so this is an alternative. Leave a thanks if this helped
and thanks to @ m4jonez for developing CM11 for our device :good::good:
Instructions
1 flash the stock ROM given in the cm11 thread
2 wipe data, cache and dalvik cache
3 flash the above file using odin3
4 reboot to CWM recovery and flash CM11
Click to expand...
Click to collapse
Can the baseband / modem file also be flashed through cwm?
What is the version of this cwm recovery? I'm asking because I already have one flashed on my device.
Xda
version
prajwal mohan said:
Can the baseband / modem file also be flashed through cwm?
What is the version of this cwm recovery? I'm asking because I already have one flashed on my device.
Xda
Click to expand...
Click to collapse
Yes the baseband can be flashed with cwm.
The version im using is CWM 5.5.4
niyogro said:
Yes the baseband can be flashed with cwm.
The version im using is CWM 5.5.4
Click to expand...
Click to collapse
Any problems with ROM after flashing through cwm?
Thanks in advance
Xda
none that i noticed
prajwal mohan said:
Any problems with ROM after flashing through cwm?
Thanks in advance
Xda
Click to expand...
Click to collapse
Sofar ive encountered no problems other than the bugs mentioned in the CM11 thread.
BTW the CWM version is 5.5.0.4.
Guys check out this new app i developed, its free
http://forum.xda-developers.com/showthread.php?t=3091245