Database Info

[Q] rom

i got my sgs2 and i wanna install cyanogen mod 7 so i got everything to do it but i just wanna know that if i do it wud it wipe out everything in my phone... caz i wanna keep everything on

blackbullet9 said:
i got my sgs2 and i wanna install cyanogen mod 7 so i got everything to do it but i just wanna know that if i do it wud it wipe out everything in my phone... caz i wanna keep everything on
Click to expand...
Click to collapse
Well when you do a factory reset and anything else you'll lose all of your information but it can be very easy to recover. If you added a Google account to your phone then your contacts will be backed up and your apps redownloaded and anything on your SD card will stay there. All of the stuff from the Google account will come back after you have added the SAME Google account to the phone during setup which is done when you flash a new rom.
Sent from my Sensation using XDA

cyanogenmod
thnx for d reply but i got one more question i my sgs2 is on gingerbread 2.3.4 and i wanna get cyanogenmod on but everytime i try it says failed with some other stuff.. first i got rom manager premium then clicked the clockword mode recovery thing then i downloaded this rom from some website then i clicked install rom from sd card then it went to some boot screen theni found it and i clicked but it never works plz tell me a way how to.....
thnx

blackbullet9 said:
thnx for d reply but i got one more question i my sgs2 is on gingerbread 2.3.4 and i wanna get cyanogenmod on but everytime i try it says failed with some other stuff.. first i got rom manager premium then clicked the clockword mode recovery thing then i downloaded this rom from some website then i clicked install rom from sd card then it went to some boot screen theni found it and i clicked but it never works plz tell me a way how to.....
thnx
Click to expand...
Click to collapse
Well I'm not too sure, especially with your phone but this is what should happen, reboot into recovery, do some wipes then flash the roms and reboot, if it comes up with a problem DURING the flashing then redownload the rom. If the case is that your phone doesn't boot fully then the problem is that you are using the wrong firmware because you are using a Rom with a different android version. If this didn't solve it then try asking in the sgs2 forums because I don't know too much about your phone
Sent from my HTC Sensation Z710e using XDA

thnx but i dont know much about flashin an stuff i just want cyanogenmod for my sgs2 plz gimmie some steps....
thnx

blackbullet9 said:
thnx but i dont know much about flashin an stuff i just want cyanogenmod for my sgs2 plz gimmie some steps....
thnx
Click to expand...
Click to collapse
Well ill give you all of my thougts. Redownload the Tom and do a wipe then install it, if it doesn't work ty a different version if cyanogenmod
Sent from my Sensation using XDA

First, boot into recovery. Not sure how it works on the sgs2 because I'm running an Incredible 2, but it should be by holding the power and volume buttons if you can't get there from ROM manager.
Second, wipe data/factory reset.
Third, wipe cache partition.
Fourth, advanced/wipe dalvik cache.
Fifth, mounts and storage/format system.
Sixth, install zip from sd card.
Seventh, install gapps if it isn't in the ROM.
Eighth, reboot.
Here is the link to your phone on Cyagenmod's website: http://wiki.cyanogenmod.com/wiki/Samsung_Galaxy_S_II:_Full_Update_Guide

HELP after downgrade from ICS to GB my phone doesn't start!

Hay guys. Please help me. Some days ago i flashed my phone with 4.0.4 by Kies and everything was ok but after some days using ICS i was totally disappointed from it and decide to back my perfectly working 2.3.6 (Ausrian rom) with which i was before. But now after flashing it with Odin my phone stays on the first screen (Choose lang.) and than some messages start to shows up saying some google services can't start and after some seconds the phone restarts and all repeats again. PLEASE HELP if it's possible! Thanks in advance!!

may be flashing problem/Download file may be having some problem, Try to download the Stock ROM and Flash it again with ODIN and check...

mj.vikram said:
may be flashing problem/Download file may be having some problem, Try to download the Stock ROM and Flash it again with ODIN and check...
Click to expand...
Click to collapse
Yes, i used the original Austria rom (3 Hutchinson) which i downloaded from sammobbile's stock rom section...

Marinski79 said:
Yes, i used the original Austria rom (3 Hutchinson) which i downloaded from sammobbile's stock rom section...
Click to expand...
Click to collapse
Check if you are able to Boot in to Recovery Mode, if possible then Wipe Data and reboot the system..

i m using frankstainmod ICS , can i flash cm 7.2 using cwm???

TUSHARKATE007 said:
i m using frankstainmod ICS , can i flash cm 7.2 using cwm???
Click to expand...
Click to collapse
Better you downgrade to GB and then flash CM 7 on it....

mj.vikram said:
Better you downgrade to GB and then flash CM 7 on it....
Click to expand...
Click to collapse
thanks

go to recovery mode
do a factory reset
cache wipe
You do not need to flash cwm.
use gb original recovery.
Sent from my GT-I9103 using xda app-developers app
---------- Post added at 12:56 AM ---------- Previous post was at 12:45 AM ----------
Or you can flash cwm.
Then u can recovery from the backup.
For my experience, I encouter the same things as u (downgrade to gb, can't bpot).
What I do is listed below:
1. power off phone.
2. power on phone and press home+volume up to enter one mode (I don't how to name it. Also, the mode is like cwm, but only few functon)
3. select factory reset. select cache……
4. then u can reboot to a clean gb systen
5. flash cwm via odin and recovery it to the backup I made before flash ics.
Sent from my GT-I9103 using xda app-developers app

mj.vikram said:
Check if you are able to Boot in to Recovery Mode, if possible then Wipe Data and reboot the system..
Click to expand...
Click to collapse
Yes, this worked! Thanks a lot dude!!! My biggest problem was that i didn't made a backup before flash to ICS... And i wasn't rooted my phone and installed CWM until now The second problem was that i wasn't able to start CWM after installing it. I tried 10 times maybe and when i was going to give up i get lucky and it starts (ufff.. Than i wipe data/cash and even did factory reset and after that my phone reborn DD
Thanks again for all answers and help guys

Marinski79 said:
Yes, this worked! Thanks a lot dude!!! My biggest problem was that i didn't made a backup before flash to ICS... And i wasn't rooted my phone and installed CWM until now The second problem was that i wasn't able to start CWM after installing it. I tried 10 times maybe and when i was going to give up i get lucky and it starts (ufff.. Than i wipe data/cash and even did factory reset and after that my phone reborn DD
Thanks again for all answers and help guys
Click to expand...
Click to collapse
Happy to help ,....

[FIX] Flashing Stock Rom/Custom ROM over Angeeks ROM

I'm facing a weird problem. I can't flash stock rom via Odin. The phone is always stuck on the Samsung screen. Tried xxlq7/xxlq9. I'm on angeeks rom. Wanted to try the blueberry sensation rom.
So for that I tried flashing xxlq9 again as recommended and faced this issue.
EDIT [FIX]
As suggested by Kartik pat i was able to successfully flash stock rom over angeeks rom
I followed the following steps:
1. Take tb for all apps [angeeks rom]
2. Restore any gingerbread backup you might have from CWM. Boot your device.
3. Flash xxlq9 via Odinv3. Boot device
4. Flash cwm4. Boot device.
5. Flash ardatdat kernel v4.0 [ensures the erase bug issue is resolved]
6. Boot System
7. Reboot into recovery. Wipe data,cache,dalvik cache.
8. Boot system and tada
If you want to flash bb rom over this then:
1. Flash the bb rom v1. Reboot.
2. Flash the bug fix zip. Reboot.
3. Flash sensation mod
P.s. this method worked for me using the gb backup and cwmv4.
Hope this helps.
EDIT 2:
As posted by vikesh....
Hey Buddies,
I did few R&D over Angeek ROM. As we are facing problem after Flashing NORDIC ROM over this One.
Here is the procedure:
If you Have any Back of ICS / GB then only apply these changes. Coz I have already did this.
Caution: Please take your Backup before then Try to Do below mentioned steps.
1) Requirements:
1.1) Must b having Ardatdat's eMMC erased Kernel i.e. V4.0 & higher.
1.2) ODIN V 3.07
1.3) Latest Kies Installed (for USB drivers)
1.4) Latest XXQL9 NORDIC ROM
1.5) CMW 6.0.1.1 for CMW flashing & CMW 6.0.1.1.tar for ODIN.
1.6) A PC..(of course):silly:
2) Flashing:
As per Suggestion by chandanbs, NORDIC ROM is almost come with Full in System Rom Partition.
So, here is few suggestion which was already suggested by our Great Mj.vikram buddy over this Thread & see Post no #8 there.
Hope, your ROM Partition is 619/620MB.
After Flashing above procedure, If you have flashed Ardatdat's Kernel first & have installed any ROM Specially ANGEEK ROM(coz having problem in that rom particularly as per users) Then Follow the Process:
2.1) Go to CMW Recovery MOD & Install Latest CMW 6.0.1.1
2.2) Wipe Data/Factory Reset.
2.3) Go to CMW recovery again & Just Restore you previous backup of any ROM.
2.4) Open ODIN 3.07(Right Click over Exe & select "Run As Administrator") & Follow the steps for flashing Stock ROM using this tutorial
2.5) After Booting just Flash CMW V6 using ODIN 3.07.
2.6) Don't Wipe Data / Factory Reset or Wipe cache / dalvik Cache. Just let it boot.
Now you have Successfully Flashed Nordic ROM over Angeek / Any other ROM.
Sent from my GT-I9103 using xda app-developers app

Try to restore ur cwm backup of gb if u have and den flash ics
I did the same thing i was also using angeek's rom and now i m using BB

Can I restore my cwm backup over xxlq9?
Sent from my GT-I9103 using xda app-developers app

pulley06 said:
Can I restore my cwm backup over xxlq9?
Click to expand...
Click to collapse
yes you can and which ODIN version you are using for flashing better to flash using v3......

mj.vikram said:
yes you can and which ODIN version you are using for flashing better to flash using v3......
Click to expand...
Click to collapse
Mj i had similar issue...i want to taste mazel n was flashin ics stock rom..using odin 3.x but it stuck in mid way durin flashin...
Wat cld b d reason ?? Later i restored my cwm backup..
Sent from my GT-I9103 using Tapatalk 2

mj.vikram said:
yes you can and which ODIN version you are using for flashing better to flash using v3......
Click to expand...
Click to collapse
Yeah I was using v3
Okay so I wanted to use the bb rom...are these steps enough?
1. Take tb for all apps
2. Restore backup
3. Flash xxlq9 via Odin
4. Flash cwm
5. Flash ardatdat kernel
6. Wipe data
7. Wipe cache
8. Flash bb v1,fixes, sensation mod.
Sent from my GT-I9103 using xda app-developers app

vipul12389mehta said:
Mj i had similar issue...i want to taste mazel n was flashin ics stock rom..using odin 3.x but it stuck in mid way durin flashin...
Wat cld b d reason ?? Later i restored my cwm backup..
Click to expand...
Click to collapse
i am also not sure buddy i also faced this kind of issue once then i restored to GB and flashed it again, but i flashed Mazel on Leaked ICS so i thought it was the problem ......
pulley06 said:
Yeah I was using v3
Okay so I wanted to use the bb rom...are these steps enough?
1. Take tb for all apps
2. Restore backup
3. Flash xxlq9 via Odin
4. Flash cwm
5. Flash ardatdat kernel
6. Wipe data
7. Wipe cache
8. Flash bb v1,fixes, sensation mod.
Click to expand...
Click to collapse
yes buddy you are correct, you need to wipe all 3 ie data, cache & Dalvic cache..
But i feel its not mandatory to flash XXLQ9 because i use to flash on my Leaked ICS and it was working fine when i used it.....

i followed all the steps mentioned above...the phone booted to the home screen of xxlq9...flashed bb rom successfully as per cwm...but the phone is stuck on the samsung screen that comes after galaxy r appears

vipul12389mehta said:
Mj i had similar issue...i want to taste mazel n was flashin ics stock rom..using odin 3.x but it stuck in mid way durin flashin...
Wat cld b d reason ?? Later i restored my cwm backup..
Sent from my GT-I9103 using Tapatalk 2
Click to expand...
Click to collapse
It gets stuck for like 10-15 secs but later it flashes ROM properly,
@mj whats wrong to do it with V1.85?
@pulley I also faced same problem yesterday, but I think that time i did not mount/unmout system so I reflashed BB again by pressing two times mount>unmount (final would be unmount/system), so just press two times, still not booting then again wipe all 3 (cache,dalvik and data)

I think there is few points we should consider while flashing BB or MAZEL2 rom if u are on ANGEEK ROM.
If anybody who sucessfully flashed Stock rom & then BB or Mazel 2 after Angeek, must come in front and give us the solution.
@pulley: buddy, as u r the OP, pls add the procesure in ur OP(after getting the solution) and give ur thread name as "Flashing stock rom after Angeek rom". Coz lots of people are flashing over angeek and facing lots of problem.
Asap answer will b appriciated.
Sent from my GT-I9103 using xda premium

kataria.vikesh said:
@pulley: buddy, as u r the OP, pls add the procesure in ur OP(after getting the solution) and give ur thread name as "Flashing stock rom after Angeek rom". Coz lots of people are flashing over angeek and facing lots of problem.
Asap answer will b appriciated.
Sent from my GT-I9103 using xda premium
Click to expand...
Click to collapse
Done :good:

pulley06 said:
Done :good:
Click to expand...
Click to collapse
Great buddy. I will add this in Angeek ROM'S OP.
Sent from my GT-I9103 using xda premium

I don't have a gb backup den what should I do???
Sent from my GT-I9103 using xda premium

Optional Method
on request of pulley06 posting this
I was facing same problem from yesterday, so i followed this
1. remove battery/SDcard/SIM
2. wait for 5 minutes
3. insert SIM and SD card and plug USB cable in phone and connect it with laptop/PC (DO NOT INSERT BATTERY)
4. wait for one minute and now insert battery (With USB cable connected)
5. switch on
6. flash stock ICS and reboot
5 flash CWM (I used 5.5 for BB ROM) and reboot
7 enter CWM
8 Mount/Unmount> click on Unmount/system again click same (so click two times)
9 now flash BB ROM and Reboot
10. Enter CWM and repeat step 8 and flash Sensation Theme. and reboot.

vishu1991 said:
I don't have a gb backup den what should I do???
Sent from my GT-I9103 using xda premium
Click to expand...
Click to collapse
I hope the above post helps you :thumbup:
Sent from my GT-I9103 using xda app-developers app

vishu1991 said:
I don't have a gb backup den what should I do???
Sent from my GT-I9103 using xda premium
Click to expand...
Click to collapse
try flashing Stock GB through Odin.

i created back up of both nordic and austian rom (also gb)
with ardadat kernel
just restore
wipe data/ cache
and flash roms
i have no issue,

Nordic rom flashing over angeek mod rom
Hey Buddies,
I did few R&D over Angeek ROM. As we are facing problem after Flashing NORDIC ROM over this One.
Here is the procedure:
If you Have any Back of ICS / GB then only apply these changes. Coz I have already did this.
Caution: Please take your Backup before then Try to Do below mentioned steps.
1) Requirements:
1.1) Must b having Ardatdat's eMMC erased Kernel i.e. V4.0 & higher.
1.2) ODIN V 3.07
1.3) Latest Kies Installed (for USB drivers)
1.4) Latest XXQL9 NORDIC ROM
1.5) CMW 6.0.1.1 for CMW flashing & CMW 6.0.1.1.tar for ODIN.
1.6) A PC..(of course):silly:
2) Flashing:
As per Suggestion by chandanbs, NORDIC ROM is almost come with Full in System Rom Partition.
So, here is few suggestion which was already suggested by our Great Mj.vikram buddy over this Thread & see Post no #8 there.
Hope, your ROM Partition is 619/620MB.
After Flashing above procedure, If you have flashed Ardatdat's Kernel first & have installed any ROM Specially ANGEEK ROM(coz having problem in that rom particularly as per users) Then Follow the Process:
2.1) Go to CMW Recovery MOD & Install Latest CMW 6.0.1.1
2.2) Wipe Data/Factory Reset.
2.3) Go to CMW recovery again & Just Restore you previous backup of any ROM.
2.4) Open ODIN 3.07(Right Click over Exe & select "Run As Administrator") & Follow the steps for flashing Stock ROM using this tutorial
2.5) After Booting just Flash CMW V6 using ODIN 3.07.
2.6) Don't Wipe Data / Factory Reset or Wipe cache / dalvik Cache. Just let it boot.
Now you have Successfully Flashed Nordic ROM over Angeek / Any other ROM.
Requesting OP to add this one also in his OP Post.

Vikesh.. looks good.. please add few steps as to how to make this nordic room rooted.. as you cant directly flash ardatdat kernel over it as it already full in system rom partition.. :silly:

This means if I don't have an earlier backup of ics/gb and i am on angeeks rom I can't flash any new rom...plz clarify....
Sent from my GT-I9103 using xda premium

CM10 galaxy tab plus how to flash ROM

Can any one tech me how to flash CM10 on galaxy tab plus from zero??
Cause when I try to flash it's got boot loop.

nopphonyel said:
Can any one tech me how to flash CM10 on galaxy tab plus from zero??
Cause when I try to flash it's got boot loop.
Click to expand...
Click to collapse
Can r u entered Download mode or Recovery mode?
Try to hold on volume up and power button until screen off then release and press power button again for enter recovery mode.
After entered Recovery mode "Wipe User Data", "Wipe Cache" and "Reboot"
If this solution cant solve a problem please try to flash your tab to Official HC and ICS with Odin then Flash to CM10 again.
Dont Wipe Data with CM Touch ,please use clockworkmod 6 for wipe data.

Yep
Sent from my GT-S5570 using xda app-developers app

meow-meow said:
Can r u entered Download mode or Recovery mode?
Try to hold on volume up and power button until screen off then release and press power button again for enter recovery mode.
After entered Recovery mode "Wipe User Data", "Wipe Cache" and "Reboot"
If this solution cant solve a problem please try to flash your tab to Official HC and ICS with Odin then Flash to CM10 again.
Click to expand...
Click to collapse
I have problem when I wipe data. it's auto reboot
Sent from my GT-S5570 using xda app-developers app

nopphonyel said:
I have problem when I wipe data. it's auto reboot
Sent from my GT-S5570 using xda app-developers app
Click to expand...
Click to collapse
R u try flash to HC ?
** If u flashed and found a boot-loop after flash HC, please follow up latest post.

Halp!
Good timing, i have a similar problem.
I was at ICS 4.0.4 rooted then decided to downgrade to HC stock to back it up (since ICS is buggy).. I flashed using odin 3v1.85 using a single file PDA: P6200DXKL3_P6200OLBKK8_P6200DXKK5_HOME.tar.md5. After flashing HC, I'm stuck at bootloop.
Then I have no choice than to flash it up from there, since I can still access recovery 3e.. Firstly i flashed CWM 6 using odin, then tried to update CM10 from my external sdcard. Then this error shows up
Installing: /emmccm-10-20120904-UNOFFICIAL-p6200.zip
Finding update package...
E: unknown volume for path [/emmccm-10-20120904-UNOFFICIAL-p6200.zip
E: Can/t mount /emmccm-10-20120904-UNOFFICIAL-p6200.zip
installation aborted.
BTW I wiped data and cache using CWM. I accidentally formatted the sdcard my real objective is to mount it then I didnt notice.
oyea, tried flashing it using touch cwm, it worked but it boot loops..then i tried acessing recovery but it just went off, and i cant turn it on.
Good thing when i charge it on an outlet the screen goes on then i went to Downloadmode again. I reflashed it back to HC via odin.
NOTE: ( MY tab is ruinned. now the screen won't turn on, only when I'm charging it as previously stated. The only thing i can access is download mode
Thanks in advance :crying: I'm at lost

I have a experiences like this. I try entered to download mode and re-flash my tab to HC with Odin then reboot a device and wipe all user data.

Finally, I'm on CM10. :victory:
Flashing back to ICS fixed the bootloop, then from there it's history!
Though I forgot to copy the cwm backup of my ICS before formatting the sdcard. Now it's gone :silly: . Anyway, it's nice to start off from scratch.
Can someone tell me how to go back to stock HC/ICS from ICS from CM10 without the nandroid backup? Just in case some problems will occur in the future. Thanks!

valkyrie-randgris said:
Finally, I'm on CM10. :victory:
Flashing back to ICS fixed the bootloop, then from there it's history!
Though I forgot to copy the cwm backup of my ICS before formatting the sdcard. Now it's gone :silly: . Anyway, it's nice to start off from scratch.
Can someone tell me how to go back to stock HC/ICS from ICS from CM10 without the nandroid backup? Just in case some problems will occur in the future. Thanks!
Click to expand...
Click to collapse
I rollback from CM10 to Stock HC with Odin and download stock HC from Sammobile.com.

Thanks mate! I'll keep that in mind.
I just hope bootloop or bootstuck won't occur. Like when I flashed the single HC tar file from sammy from ICS. Cheers!

So .. what should I do?
Sent from my GT-S5570 using xda app-developers app

Check below link if want to downgrade in safest way, using mobile odin.
http://forum.xda-developers.com/showthread.php?p=32427424
Sent from my GT-P6200 using Tapatalk 2

nopphonyel said:
So .. what should I do?
Sent from my GT-S5570 using xda app-developers app
Click to expand...
Click to collapse
Nopphoyel, can u turn your tab to download mode.?
Hope can, so here the step.
Try flash hc using odin1.85, put the firmware package to pda, check the re-partition. Select pit and put .pit file and flash.
It worked for me.
Get the pit file under 'dyelen' name from below link, download & unzip.
http://forum.xda-developers.com/showthread.php?p=31936913
Try 1st, hope work on u too..
How to flash cm10? Here the drill.....
1. Root. Download the supersuv0.94.zip from below link and save to externalsdcard, Turn to recovery mode/ Choose update from sdcard and flash supersu v0.94.zip:
http://www.google.com.ph/url?sa=t&r...zoHgDA&usg=AFQjCNFyqHRhzKdNa_kvZPRsaep-6XEt9g
2. Clockworkmod recovery- the most important thing if want flash cm10, u need the cwr. Download the recovery mode .img from aorth.
http://forum.xda-developers.com/showthread.php?p=29077817
,rename to recovery.img and save on external sdcard. U can flash recovery using heimdall or mobile odin, i prefer mobile odin. Download mobile odin.
http://forum.xda-developers.com/showthread.php?p=19375402
check the recovery select your recovery.img from external sdcard and flash. Wait until it reboot to the recovery. Before u flash any rom please make backup to internal sdcard & Try to restore 1st to makesure your nandroid backup work. Also backup using go backup or titanium backup. If your nandroid backup getting weird this optional to get your data back.
3. Backup call log and sms. Please backup to external sdcard just change the backup folder in setting. This very useful to restore back your log & Sms after your flash new rom.
Call log backup : https://play.google.com/store/apps/...hu.CallLogBackupRestore&feature=search_result
SmsBackup : https://play.google.com/store/apps/details?id=com.riteshsahu.SMSBackupRestore&feature=search_result
3. If all work. Wipe data/Cache/Dalvik.
Flash new rom
cm10: http://forum.xda-developers.com/showthread.php?p=30434924
happy flashing...
Do With Your Own Risk. And Don't Wipe Data using Ics stock recovery or temporary cwr. Since they detected have emmc brickbug and cause hardbrick. Hardbricks mean totally brick, only JTAG or change main board your last hope.
thanks to aorth for make this tablet getting better and better..
Sent from my GT-P6200 using Tapatalk 2

bujai5279 said:
Nopphoyel, can u turn your tab to download mode.?
Hope can, so here the step.
Try flash hc using odin1.85, put the firmware package to pda, check the re-partition. Select pit and put .pit file and flash.
It worked for me.
Get the pit file under 'dyelen' name from below link, download & unzip.
http://forum.xda-developers.com/showthread.php?p=31936913
Try 1st, hope work on u too..
How to flash cm10? Here the drill.....
1. Root. Download the supersuv0.94.zip from below link and save to externalsdcard, Turn to recovery mode/ Choose update from sdcard and flash supersu v0.94.zip:
http://www.google.com.ph/url?sa=t&r...zoHgDA&usg=AFQjCNFyqHRhzKdNa_kvZPRsaep-6XEt9g
2. Clockworkmod recovery- the most important thing if want flash cm10, u need the cwr. Download the recovery mode .img from aorth.
http://forum.xda-developers.com/showthread.php?p=29077817
,rename to recovery.img and save on external sdcard. U can flash recovery using heimdall or mobile odin, i prefer mobile odin. Download mobile odin.
http://forum.xda-developers.com/showthread.php?p=19375402
check the recovery select your recovery.img from external sdcard and flash. Wait until it reboot to the recovery. Before u flash any rom please make backup to internal sdcard & Try to restore 1st to makesure your nandroid backup work. Also backup using go backup or titanium backup. If your nandroid backup getting weird this optional to get your data back.
3. Backup call log and sms. Please backup to external sdcard just change the backup folder in setting. This very useful to restore back your log & Sms after your flash new rom.
Call log backup : https://play.google.com/store/apps/...hu.CallLogBackupRestore&feature=search_result
SmsBackup : https://play.google.com/store/apps/details?id=com.riteshsahu.SMSBackupRestore&feature=search_result
3. If all work. Wipe data/Cache/Dalvik.
Flash new rom
cm10: http://forum.xda-developers.com/showthread.php?p=30434924
happy flashing...
Do With Your Own Risk. And Don't Wipe Data using Ics stock recovery or temporary cwr. Since they detected have emmc brickbug and cause hardbrick. Hardbricks mean totally brick, only JTAG or change main board your last hope.
thanks to aorth for make this tablet getting better and better..
Sent from my GT-P6200 using Tapatalk 2
Click to expand...
Click to collapse
Every thing is OK but when i finish flash to HC It's locked with password and I don't know password.:crying:
And I tried to flash again and it stuck at Samsung Galaxy Tab Plus 7.0 logo (Not booting logo,This logo show before boot to android OS) :crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying:

Did u wipe from ICS stock recovery or temporary cwr(Cwr with touch)? My tab also need password on hc after hardbricks 3month ago, i send to centre, they change the main board..
Try find people who can perform JTAG, or send to centre your last hope...Hopefully centre not find your root the device, your waranty will void & u need to pay for that board.
Sorry dude..
Sent from my GT-P6200 using Tapatalk 2

!!??
bujai5279 said:
Did u wipe from ICS stock recovery or temporary cwr(Cwr with touch)? My tab also need password on hc after hardbricks 3month ago, i send to centre, they change the main board..
Try find people who can perform JTAG, or send to centre your last hope...Hopefully centre not find your root the device, your waranty will void & u need to pay for that board.
Sorry dude..
Sent from my GT-P6200 using Tapatalk 2
Click to expand...
Click to collapse
Do u know how much is it I mean main board

Im from malaysia, in ringgit rm713.
Sent from my GT-P6200 using Tapatalk 2

I'm on Paranoid Android 2.50 (Androi 4.1.2), coming from Android 3.2.
Onething that I'd like to share is you should flash a cusstom rom wwhen you're on Android 3.2. Some friends of mine used the stock Android 4.0 then flashed CM10 or Paranoid and their devices bricked.

although very beautiful and fluid is still immature has many bugs that I at least I consider fundamental for me ... for example, does not read the external sd ... not the video player does not read the pen drive .... well you would for hands just a phone and not a very large smartphone / tablet sfuttare in full ... I have uninstalled immediately expect a more complete version ... more well known problems and then decide to suit your needs if you install it or not. hello ..
Inviato dal mio GT-P7500 con Tapatalk 2
---------- Post added at 10:31 PM ---------- Previous post was at 10:26 PM ----------
thangbithit said:
I'm on Paranoid Android 2.50 (Androi 4.1.2), coming from Android 3.2.
Onething that I'd like to share is you should flash a cusstom rom wwhen you're on Android 3.2. Some friends of mine used the stock Android 4.0 then flashed CM10 or Paranoid and their devices bricked.
Click to expand...
Click to collapse
Hello Could you tell me what bugs has paranoid 2:50?
Inviato dal mio GT-P7500 con Tapatalk 2

bujai5279 said:
Did u wipe from ICS stock recovery or temporary cwr(Cwr with touch)? My tab also need password on hc after hardbricks 3month ago, i send to centre, they change the main board..
Try find people who can perform JTAG, or send to centre your last hope...Hopefully centre not find your root the device, your waranty will void & u need to pay for that board.
Sorry dude..
Sent from my GT-P6200 using Tapatalk 2
Click to expand...
Click to collapse
Can some body help me please.I am trying to install cm10 rom and i get this message E:Error in /Eternal _sd/cm-10 (status) installation aborted.Please helpme

[Q] Flashing Lg logo and not booting beyond after flasing with rom manager.

I am having Lg optimus one p500.. After flasing it using rom manager i used the option restart in recovery mode then the phone got stuck with the lg logo and not going beyond that, what should i do now?

Search button is your best friend, mate. Search for unbricking.
Or try this : http://forum.xda-developers.com/showthread.php?t=1318750
--
P>
Sent from my LG-P500 using xda app-developers app

if u still want to flash recovery use this its the safest method
http://forum.xda-developers.com/showthread.php?t=2003080

Hi Rocky,
Were u able to fix the issue ?
I mean...i faced the same problem but it took me couple of days & a whole lot of googling to fix it
ROM - Paranoid Android by Bytecode
Sent from my LG-P500 using xda app-developers app

Rockybala90 said:
I am having Lg optimus one p500.. After flasing it using rom manager i used the option restart in recovery mode then the phone got stuck with the lg logo and not going beyond that, what should i do now?
Click to expand...
Click to collapse
Pretty simple .. put to emergency ..attach to pc with usb .. flash stock with kdz ... after phone starts root with superoneclick and flash amon ra recovery with flash gui ... switch off phone .. press and hold home+volup+power to go into recovery
pls hit thanks if I helped in any way
:: peace
Sent from Legendary o1

Next time flash through recovery, flashing through rom manager can cause problems...
Sent from my LG-P500h using xda app-developers app

Just an advise, try to avoid using KDZ. Perhaps, KDZ already bricked by set thrice even If I followed everything carefully. Some errors cannot be resisted.
On the other note, using ROM manager to flash recovery is recommended only when you have a fast WI-FI or 3G connection. Your error was caused due to the flashing of corrupted recovery.

DJBhardwaj said:
Just an advise, try to avoid using KDZ. Perhaps, KDZ already bricked by set thrice even If I followed everything carefully. Some errors cannot be resisted.
On the other note, using ROM manager to flash recovery is recommended only when you have a fast WI-FI or 3G connection. Your error was caused due to the flashing of corrupted recovery.
Click to expand...
Click to collapse
For some reason CWM tends to give a lot of soft brick problems .. its better to flash amon-ra 3.xx via the FlashGUI app
pls hit thanks if I helped in any way
:: peace
Sent from Legendary o1

anaknin said:
For some reason CWM tends to give a lot of soft brick problems .. its better to flash amon-ra 3.xx via the FlashGUI app
pls hit thanks if I helped in any way
:: peace
Sent from Legendary o1
Click to expand...
Click to collapse
The new BB version of the recovery; 5.0.2.7 is buggy while 5.0.2.0 is stable.
Sent from my Nexus S

DJBhardwaj said:
The new BB version of the recovery; 5.0.2.7 is buggy while 5.0.2.0 is stable.
Sent from my Nexus S
Click to expand...
Click to collapse
Correctly said .. amon ra for new bb is stable and works like a charm
pls hit thanks if I helped in any way
:: peace
Sent from Legendary o1

Fixed the problem of LG flashing logo.
downloaded the v10E_00.kdz file from the forum...LGMDP doesnt work .....KDZ_FW_UPD_EN worked for me.....
In the emergency mode (press return button+vol down+power button) connect the usb with the pc......pc will automatically find the mobile connected after some 2min or less......now go to the device manager and disable the lg modem from the modem option......then open the KDZ folder install the .msi package and start KDZ_FW_UPD.exe inside the folder the KDZ window opens in that select the option 3GQCT for Type and for the PhoneMode select cs_emergency then select the .kdz file from the folder where u placed it in ur pc.......Click Launch Software update it will start installing the rom after some minutes it will be completed......Thats it....then i installed the same rom manager and this time i flashed it with lg optimus one old bb(old baseband)(5.0.2.7)option.....then i installed jelly bean after successfully installed there too i got a problem with the network is not connecting the i searched and found the new baseband P500-v20G-baseband then installed it using LGDMP......
After u successfully solved the problem of flashing LG logo the other problems are easy to solve.....:good::good::good: I'll try to put those download links installation details......if not useful misses please pardon me......

download link
Download this...
((csmg.lgmobile.com:9002/swdata/WEBSW/LGP500/AINDBK/V10e_00/V10E_00.kdz)))