Heyo everyone
I'm coming from cm10.1 and now i wanted to go back to stock.
so I've downloaded I9105PXXAMC2 from samfirmware.com
unfortunately after flashing via odin i got bootloop
i've tried to wipe from android recovery but then there's only a red triangle
is there any solution?
it's almost impossible for me to download another firmware because my internet speed sucks so massive
Gh3ttoKiLL4 said:
Heyo everyone
I'm coming from cm10.1 and now i wanted to go back to stock.
so I've downloaded I9105PXXAMC2 from samfirmware.com
unfortunately after flashing via odin i got bootloop
i've tried to wipe from android recovery but then there's only a red triangle
is there any solution?
it's almost impossible for me to download another firmware because my internet speed sucks so massive
Click to expand...
Click to collapse
Install CWM with odin and wipe your data cache and dalvik cache from there then it will boot up fine
safariking said:
Install CWM with odin and wipe your data cache and dalvik cache from there then it will boot up fine
Click to expand...
Click to collapse
I think installing clockworkmod for wiping isn't an option. The op flashed stock Rom probably because he wants his warranty back
Installing clockworkmod again would void it again. If the stock Rom you downloaded is the one you had before rooting, then try flashing it again. If it's not, then download your originally out of box stock Rom and flash it with Odin.
Like...the same baseband version as the one you had before any modification of your system
Sent from my GT-I9105P using xda premium
Brian_SGW_CM9 said:
I think installing clockworkmod for wiping isn't an option. The op flashed stock Rom probably because he wants his warranty back
Installing clockworkmod again would void it again. If the stock Rom you downloaded is the one you had before rooting, then try flashing it again. If it's not, then download your originally out of box stock Rom and flash it with Odin.
Like...the same baseband version as the one you had before any modification of your system
Sent from my GT-I9105P using xda premium
Click to expand...
Click to collapse
You need to wipe it otherwise it won't boot up and if you had cm10.1 you must wipe your internal sd card to
if you install cyanogenmod and you odin back to stock rom the stock rom will simply not boot if no wipe was done!!!
safariking said:
You need to wipe it otherwise it won't boot up and if you had cm10.1 you must wipe your internal sd card to
if you install cyanogenmod and you odin back to stock rom the stock rom will simply not boot if no wipe was done!!!
Click to expand...
Click to collapse
I thought flashing through Odin already wipes..
So if I want to Odin back. With the clockworkmod, I first wipe, then flash stock. Right?
Sent from my GT-I9105P using xda premium
No
odin back first and after that install cwm and wipe!
Sent from my awesome S2 Plus
safariking said:
No
odin back first and after that install cwm and wipe!
Sent from my awesome S2 Plus
Click to expand...
Click to collapse
Can You please be more specific? I'm trying to install stock rom, and it's intering loop on boot. Trying to instal CWM via Odin - no success.
Did you wipe before flashing via Odin?
Sent from my GT-I9105P using XDA Premium 4 mobile app
Brian_SGW_CM9 said:
Did you wipe before flashing via Odin?
Sent from my GT-I9105P using XDA Premium 4 mobile app
Click to expand...
Click to collapse
That's a question too... How to do wipe, if all I have is official bootloader, with debugging OFF, and loop / stuck on SUMSUNG logo?
(I don't care of any kind of warranty, just want to boot up this brick with ANY ROM!)
borsiknet said:
That's a question too... How to do wipe, if all I have is official bootloader, with debugging OFF, and loop / stuck on SUMSUNG logo?
(I don't care of any kind of warranty, just want to boot up this brick with ANY ROM!)
Click to expand...
Click to collapse
Can you reach download mode?
Sent from my GT-I9105P using XDA Premium 4 mobile app
Brian_SGW_CM9 said:
Can you reach download mode?
Sent from my GT-I9105P using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yes, I'm trying all original firmware from sammobile, that appropriate to this model. Sometimes it geting custom BIN, and bootloader taking it back to samsung official.
borsiknet said:
Yes, I'm trying all original firmware from sammobile, that appropriate to this model. Sometimes it geting custom BIN, and bootloader taking it back to samsung official.
Click to expand...
Click to collapse
Yep, that's the only way
Sent from my GT-I9105P using XDA Premium 4 mobile app
Brian_SGW_CM9 said:
Yep, that's the only way
Sent from my GT-I9105P using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Maybe any way to know origin of the phone by S/N to which country he belong?
borsiknet said:
Maybe any way to know origin of the phone by S/N to which country he belong?
Click to expand...
Click to collapse
Find your country's name on sammobile. I mean of the firmware page of sammobile
Sent from my GT-I9105P using XDA Premium 4 mobile app
Brian_SGW_CM9 said:
Find your country's name on sammobile. I mean of the firmware page of sammobile
Sent from my GT-I9105P using XDA Premium 4 mobile app
Click to expand...
Click to collapse
There are no my contry ROM. I stucked with bootloops and debug options OFF. What to do???! It's driving me crazy...
After almost two weeks of seeking for solutions all over internet, the problem was solved. First of all there are no way to root without debuging off via odin o any other tool. All what you have, is just to look for your original firmware of the phone, and it supposed to be four file package.
Looks like:
FULL_CSC_I9105PXXAMC2_I9105POXAAMC1_I9105PXXAMC1_DBT.tar.md5
FULL_MODEM_I9105PXXAMC2_I9105POXAAMC1_I9105PXXAMC1_DBT.tar.md5
FULL_PDA_I9105PXXAMC2_I9105POXAAMC1_I9105PXXAMC1_DBT.tar.md5
s2ve.pit
In this case it was german phone so files end with DBT.
CSC - as CSC
MODEM - as CP or PHONE
PDA - as AP or PDA
and pit file for re-partition.
The name of whole package is GT-I9105P-DBT-I9105PXXAMC2_Service-Firmware.zip
For those asking for delete dalvik/cache/factory reset, the solution is - RE-PARTITION!
I used also option Nand Erase All, just to be sure I delete everything.
All other operations goes as usual in Odin.
I can't post links here, bat me mercy on those looking for solution for days and weeks long.
So here is link that I found on some forum that leading to (thanx Goshhhh!!!) to Google docs, so download was just 5 min. long.
Here is German (DBT) package, and some other usefull links. Use G. translator to understand.
h t t p : / / galaxysclub.ru/obzor-osnovnyh-funkcij-obsuzhdenie-i-reshenie-problem/2111-pomogite-s-i9105-proshivki-dlya-i9105 . html
Just remove spaces, where needed. This is a Russian forum. Respect and thousand thanx to Сергей, author of usefull post with links provided, once again THANX a lot, Sergej!
borsiknet said:
After almost two weeks of seeking for solutions all over internet, the problem was solved. First of all there are no way to root without debuging off via odin o any other tool. All what you have, is just to look for your original firmware of the phone, and it supposed to be four file package.
Looks like:
FULL_CSC_I9105PXXAMC2_I9105POXAAMC1_I9105PXXAMC1_DBT.tar.md5
FULL_MODEM_I9105PXXAMC2_I9105POXAAMC1_I9105PXXAMC1_DBT.tar.md5
FULL_PDA_I9105PXXAMC2_I9105POXAAMC1_I9105PXXAMC1_DBT.tar.md5
s2ve.pit
In this case it was german phone so files end with DBT.
CSC - as CSC
MODEM - as CP or PHONE
PDA - as AP or PDA
and pit file for re-partition.
The name of whole package is GT-I9105P-DBT-I9105PXXAMC2_Service-Firmware.zip
For those asking for delete dalvik/cache/factory reset, the solution is - RE-PARTITION!
I used also option Nand Erase All, just to be sure I delete everything.
All other operations goes as usual in Odin.
I can't post links here, bat me mercy on those looking for solution for days and weeks long.
So here is link that I found on some forum that leading to (thanx Goshhhh!!!) to Google docs, so download was just 5 min. long.
Here is German (DBT) package, and some other usefull links. Use G. translator to understand.
h t t p : / / galaxysclub.ru/obzor-osnovnyh-funkcij-obsuzhdenie-i-reshenie-problem/2111-pomogite-s-i9105-proshivki-dlya-i9105 . html
Just remove spaces, where needed. This is a Russian forum. Respect and thousand thanx to Сергей, author of usefull post with links provided, once again THANX a lot, Sergej!
Click to expand...
Click to collapse
If anyone have problem with bootloop when flash original rom, solution is simple. Just go to recovery. Samsung has stock recovery. Wipe data/factory reset and reboot phone. Thats all . PS to go to recovery turn off phone. Wait 3 seconds. hold home buton, volume up and power buton in same tame.
jaskof1 said:
If anyone have problem with bootloop when flash original rom, solution is simple. Just go to recovery. Samsung has stock recovery. Wipe data/factory reset and reboot phone. Thats all . PS to go to recovery turn off phone. Wait 3 seconds. hold home buton, volume up and power buton in same tame.
Click to expand...
Click to collapse
That was a problem, loops after flashing with Odin.
jaskof1 said:
If anyone have problem with bootloop when flash original rom, solution is simple. Just go to recovery. Samsung has stock recovery. Wipe data/factory reset and reboot phone. Thats all . PS to go to recovery turn off phone. Wait 3 seconds. hold home buton, volume up and power buton in same tame.
Click to expand...
Click to collapse
Well this worked for me just fine
Boot into cwm
Go tot mounts and storage
Format everything (no ext sdcard
Flash firmware with Odin andere cwm would be deleted
Related
I recently Flashed Kyrillios 9.0 and 9.6 and everytime I restart my Galaxy 3 it always Factory Resets, ie all the apps I had before are gone and all my desktop widgets are gone. Even worser is that it automatically turns on the 3G Internet connection which means I get charged £1 for no reason.
Also I wiped the Cache by accident after I flash 9.6 because I Flashed it separately (I flashed 9.0 first and i used it for a month then I decided to flash 9.6) so will I have to wipe the Dalvaik Cache aswell?
Try a clean flash of a stock rom. If it still happens then only solution is changing the motherboard. Look here:
http://forum.xda-developers.com/showthread.php?t=1324452
Edit: do you have 0.0kb memory bug?
Cheers
Sent from my GT-i9003 powered by Stable and Smooth CyanogenMod 9!
Try to flash a different kernel, and clear cache and wipe data in the Recovery.
bscraze said:
Try a clean flash of a stock rom. If it still happens then only solution is changing the motherboard. Look here:
http://forum.xda-developers.com/showthread.php?t=1324452
Edit: do you have 0.0kb memory bug?
Cheers
Sent from my GT-i9003 powered by Stable and Smooth CyanogenMod 9!
Click to expand...
Click to collapse
I have the problem of 0.0kb! (total memory reads 0.0kb), but i can't flash back to stock rom by odin or heimdall, the only way to flash roms is by CWM, but there are no CWM stock roms out there...
lastingfreedom said:
I have the problem of 0.0kb! (total memory reads 0.0kb), but i can't flash back to stock rom by odin or heimdall, the only way to flash roms is by CWM, but there are no CWM stock roms out there...
Click to expand...
Click to collapse
Do a wipe data and factory reset
If problem still persists, reflash the desired Rom and then wipe data and factory reset
Y can't u flash via odin
Sent from my GT-I5800 using xda premium
Arjav23 said:
Do a wipe data and factory reset
If problem still persists, reflash the desired Rom and then wipe data and factory reset
Y can't u flash via odin
Sent from my GT-I5800 using xda premium
Click to expand...
Click to collapse
I've wiped data and done a factory reset for many times, still not working:crying:
Y can't u flash via odin<<I think maybe because the internal storage is 0.0kb therefore there's nothing to flash?? (or maybe I have to learn more about odin)
lastingfreedom said:
I've wiped data and done a factory reset for many times, still not working:crying:
Y can't u flash via odin<<I think maybe because the internal storage is 0.0kb therefore there's nothing to flash?? (or maybe I have to learn more about odin)
Click to expand...
Click to collapse
U can obviously flash via odin in any case
Try it
And immediately wipe data and factory reset when phone boots into recovery the very first time
Sent from my GT-I5800 using xda premium
Arjav23 said:
U can obviously flash via odin in any case
Try it
And immediately wipe data and factory reset when phone boots into recovery the very first time
Sent from my GT-I5800 using xda premium
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2081813
The 'friend' mentioned in this post is actually me (I sign up in XDA right after he post the problem for me)
by the way, here is how I flash with odin, trying to solve my problem, is there any mistakes?:
1. Put in altas 2.2 in the PIT section
2. Put in the .tar I want to flash in the PDA section
3. Press start
The phone didn't get into recovery, it just rebooted normally
lastingfreedom said:
http://forum.xda-developers.com/showthread.php?t=2081813
The 'friend' mentioned in this post is actually me (I sign up in XDA right after he post the problem for me)
by the way, here is how I flash with odin, trying to solve my problem, is there any mistakes?:
1. Put in altas 2.2 in the PIT section
2. Put in the .tar I want to flash in the PDA section
3. Press start
The phone didn't get into recovery, it just rebooted normally
Click to expand...
Click to collapse
No
I don't know which odin version u r using
Download purukisadhybrid by shwetanklal
Extract it
Fire up doin
In ops select the. Ops shwetanklal has provided
Select flash as one package
On lower right see u will see a button of one package
Select the. Tar pckg (any. Tar pckg )
Go into download mode
As soon as the yellow coloured port comes up click start
Sent from my GT-I5800 using xda premium
Arjav23 said:
No
I don't know which odin version u r using
Download purukisadhybrid by shwetanklal
Extract it
Fire up doin
In ops select the. Ops shwetanklal has provided
Select flash as one package
On lower right see u will see a button of one package
Select the. Tar pckg (any. Tar pckg )
Go into download mode
As soon as the yellow coloured port comes up click start
Sent from my GT-I5800 using xda premium
Click to expand...
Click to collapse
I am doing what you are saying
I did that with odin 1.3, in the message box, it says: (after pressing the start button)
<ID:0/012>file analysis
<ID:0/012>setupconnection
<ID:0/012>Complete(write) operation failed
<OSM> All threads completed (succeed 0/failed 1)
Then I do it with odin 3, nothing different
package used is eh03 (http://forum.xda-developers.com/showthread.php?t=1349895)
lastingfreedom said:
I am doing what you are saying
I did that with odin 1.3, in the message box, it says: (after pressing the start button)
<ID:0/012>file analysis
<ID:0/012>setupconnection
<ID:0/012>Complete(write) operation failed
<OSM> All threads completed (succeed 0/failed 1)
Then I do it with odin 3, nothing different
package used is eh03 (http://forum.xda-developers.com/showthread.php?t=1349895)
Click to expand...
Click to collapse
That thread is for s3 not galaxy 3
Just dwnld pkhybrid 2.0
It will surely wrk
Sent from my GT-I5800 using xda premium
Arjav23 said:
That thread is for s3 not galaxy 3
Just dwnld pkhybrid 2.0
It will surely wrk
Sent from my GT-I5800 using xda premium
Click to expand...
Click to collapse
can you provide a link for pkhybrid 2.0? I can't find it...
Also, I got the stock rom from http://www.samsdroid.com/2011/09/samsung-galaxy-apollo-i5800-stock-rom.html, I tried this one as well and it is still not working, I also tried zerofill.tar, and nothing changed...
lastingfreedom said:
can you provide a link for pkhybrid 2.0? I can't find it...
Also, I got the stock rom from http://www.samsdroid.com/2011/09/samsung-galaxy-apollo-i5800-stock-rom.html, I tried this one as well and it is still not working, I also tried zerofill.tar, and nothing changed...
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2030506
Sent from my GT-I5800 using xda premium
Arjav23 said:
http://forum.xda-developers.com/showthread.php?t=2030506
Sent from my GT-I5800 using xda premium
Click to expand...
Click to collapse
I used the file in v2.3 update, I flashed it by CWM, but it didn't work, the phone stuck at the boot animation, or I am not sure whether it got into a bootloop or not
Also, I got the 0.0kb bug after I flashed from a CM7 based rom to this rom (http://forum.xda-developers.com/showthread.php?t=1527336), can this information help?
lastingfreedom said:
I used the file in v2.3 update, I flashed it by CWM, but it didn't work, the phone stuck at the boot animation, or I am not sure whether it got into a bootloop or not
Also, I got the 0.0kb bug after I flashed from a CM7 based rom to this rom (http://forum.xda-developers.com/showthread.php?t=1527336), can this information help?
Click to expand...
Click to collapse
First flash 2.0 via Odin and then 2.3 via cwm
Sent from my GT-I5800 using xda premium
Arjav23 said:
First flash 2.0 via Odin and then 2.3 via cwm
Sent from my GT-I5800 using xda premium
Click to expand...
Click to collapse
Problem solved, thank you!
Sir,
I have tried to remove kyrillos, which i successfully installed earlier and now want to restore the factory firmware back.
I have used Odin to flash factory firmware downloaded from samfirmware and apollo_0531.ops downloaded from net.
But now the phone has stuck at Samsung logo.
please help..I dont understand technical part of android development and just foloow the instructions available on net.
May be I have made a mistake which i should not have done .
Pls help me get of it
Thanx in advance
Just flash stock 2.2 froyo firmware with odin.put the ops file in ops i.e 1st row and firmware means. .Tar file in last row of odin.then put phone in download mode and connect to pc then flash it.
Flashing guide:- http://forum.xda-developers.com/showthread.php?t=873645
Samsung Galaxy 3 (I5801/I5800) Flashing Guide
Sent from my GT-I5800 using xda premium
Thanks Pratikmore for this prompt reply. I did exactly what you told.
Downloaded the latest firware from sammobile site.
Downloaded the same ops as i used for kyrillos ..i.e apollo_0531
Had put the OPS in the first line and .tar file in the last row
and flashed the phone...
Result is the Phone is not booting and stuck at the samsung logo screen...
Can you please suggest any mistake I have done..or something else i can try.
Thanks in advance
Tried exactly
pratikmore said:
Just flash stock 2.2 froyo firmware with odin.put the ops file in ops i.e 1st row and firmware means. .Tar file in last row of odin.then put phone in download mode and connect to pc then flash it.
Flashing guide:- http://forum.xda-developers.com/showthread.php?t=873645
Samsung Galaxy 3 (I5801/I5800) Flashing Guide
Sent from my GT-I5800 using xda premium
Click to expand...
Click to collapse
kk1480 said:
Thanks Pratikmore for this prompt reply. I did exactly what you told.
Downloaded the latest firware from sammobile site.
Downloaded the same ops as i used for kyrillos ..i.e apollo_0531
Had put the OPS in the first line and .tar file in the last row
and flashed the phone...
Result is the Phone is not booting and stuck at the samsung logo screen...
Can you please suggest any mistake I have done..or something else i can try.
Thanks in advance
Tried exactly
Click to expand...
Click to collapse
Plz flash 2.1eclair firmware first then flash 2.2 froyo firmware with same ops file,then sure phone will boot.
Sent from my GT-I5800 using xda premium
Thanks again Pratikmore!
I am again stuck...can u suggest where can i get eclair firmware.
I have searched a lot...but it seems the firmware has been deleted from almost every site.
You have been a great help sir...Heartiest Thanks!
pratikmore said:
Plz flash 2.1eclair firmware first then flash 2.2 froyo firmware with same ops file,then sure phone will boot.
Sent from my GT-I5800 using xda premium
Click to expand...
Click to collapse
kk1480 said:
Thanks again Pratikmore!
I am again stuck...can u suggest where can i get eclair firmware.
I have searched a lot...but it seems the firmware has been deleted from almost every site.
You have been a great help sir...Heartiest Thanks!
Click to expand...
Click to collapse
Flash a firmware without bootloader. Samfirmwares has bootloaders so search for them on android development
Sent from my GT-I5800 using xda app-developers app
kk1480 said:
Thanks again Pratikmore!
I am again stuck...can u suggest where can i get eclair firmware.
I have searched a lot...but it seems the firmware has been deleted from almost every site.
You have been a great help sir...Heartiest Thanks!
Click to expand...
Click to collapse
Download and flash 2.1 eclair from here :- http://forum.xda-developers.com/showthread.php?t=1497261
[Stock Firmwares] with removed bootloader [no hardbrick risk]
Sent from my GT-I5800 using xda premium
pratikmore said:
Download and flash 2.1 eclair from here :- http://forum.xda-developers.com/showthread.php?t=1497261
[Stock Firmwares] with removed bootloader [no hardbrick risk]
Sent from my GT-I5800 using xda premium
Click to expand...
Click to collapse
NO NEED TO FLASH 2.1! JUST DATA+CACHE WIPE REQUIRED.
Just get to recovery via 3-button combo - VOL+, VOL-, HOME, POWER, then release POWER after you see something on the screen. After you will get to recovery, release all the buttons. Then, scroll down via VOL- and VOL+ to WIPE DATA/FACTORY RESET press home and scroll to YES, press again HOME. Then after its done, scroll to WIPE CACHE PARTITION - press home, scroll to YES, then, after its done, scroll to REBOOT SYSTEM NOW (1st option) and hit HOME button again. That's it! No need of theese unnecessary steps of flashing another firmware. DATA/CACHE will get converted by this process back to Samsung's RFS filesystem (Kyrillos' ROM has ext4 and ext2 - That's why it has been not booting) and you will not get bootloop again
Since upgrading to JB 4.1.2, I am not able to downgrade to ICS. After the flashing ICS via odin or for that matter mobile odin, is complete, it goes into a boot loop. Only way way out was again flash Jelly bean, it worked. Is there any firmware with full components like pda separate file, CSC separate file and phone separate file? I have heard that we need to flash these separate files via odin to downgrade. can anybody give a download link for the same?
Do you have a CWM back-up from a previous ROM?
Sent from my GT-P6210 using xda app-developers app
unfortunately no
Sent from my GT-P6200 using xda premium
seking said:
Since upgrading to JB 4.1.2, I am not able to downgrade to ICS. After the flashing ICS via odin or for that matter mobile odin, is complete, it goes into a boot loop. Only way way out was again flash Jelly bean, it worked. Is there any firmware with full components like pda separate file, CSC separate file and phone separate file? I have heard that we need to flash these separate files via odin to downgrade. can anybody give a download link for the same?
Click to expand...
Click to collapse
you must go to stock ricovery ( with power + volum up ) and then wipe data
( your data are remove ( factory riset )
sorry for my bad ENGLISH
But I have heard that if one wipes factory reset through stock recovery, I am afraid one is liable to get bricked devices.
Sent from my GT-P6200 using xda premium
I would research the factory reset option. It shouldn't brick your device.
Sent from my GT-P6210 using xda app-developers app
deleted
S-AJAD said:
don'd worry
if you wipe in stock recovery your divice aren't break
if you wip in cwm or other castom recovery with stock row your tab are breaked
Click to expand...
Click to collapse
I thought it was the opposite... (at least for ICS)
Alway wipe in cwm
S-AJAD said:
don'd worry
if you wipe in stock recovery your divice aren't break
if you wip in cwm or other castom recovery with stock row your tab are breaked
Click to expand...
Click to collapse
NO! Wipe data in STOCK recovery brick your device, but if you wipe in CWM you are safe.
For downgrade use this guide:
http://forum.xda-developers.com/showthread.php?t=1777003
skurys said:
I thought it was the opposite... (at least for ICS)
Click to expand...
Click to collapse
i do this work when i have this tablet
i had the cyanogen mod 10 and 10.1 and paranoid.
when i want back to stock rom i need to do this work and my tab doesn't break
but in JB i dont sure. i think other member are better than me.
sorry for my english
S-AJAD said:
don'd worry
if you wipe in stock recovery your divice aren't break
if you wip in cwm or other castom recovery with stock row your tab are breaked
Click to expand...
Click to collapse
Just to make it clear.. wiping from stock is Safe IF you are in HC or JB ( someone said its safe ) but a big NO in ICS because it causes the tab to be bricked.. wiping from CWM on all roms is SAFE.. pls.. get your facts right..
Sent from my GT-P6200 using XDA Premium HD app
If you want to downgrade from official JB to official ICS, you have to have .pit file
You can search pit file for P6200 in XDA and using odin to flash official ICS with option re-partition checked
First time, when my friend downgrade without .pit file, tab got stuck at SS logo even wipe everything fully. With .pit file, it succeeded
goodwellbest said:
If you want to downgrade from official JB to official ICS, you have to have .pit file
You can search pit file for P6200 in XDA and using odin to flash official ICS with option re-partition checked
First time, when my friend downgrade without .pit file, tab got stuck at SS logo even wipe everything fully. With .pit file, it succeeded
Click to expand...
Click to collapse
Is it necessary to have three different files ie pda, phone and csc when using pit file eith repartition checked?
Sent from my GT-P6200 using xda premium
No, just ICS Stock Rom with .pit file
P6200 pit file in this thread (http://forum.xda-developers.com/showthread.php?t=1667886) works fine
You can downgrade to HC, do wipes and flash ICS.
i usually do encounter this on my 7.7 when i flash hc from ics...what i did was wipe the device using cwm after flashing the older firmware to fix the bootloop...
my friend have tab 7 plus and i'm planning to flash jb on it...is the stock JB recovery free from the brickbug?
JAYZE said:
i usually do encounter this on my 7.7 when i flash hc from ics...what i did was wipe the device using cwm after flashing the older firmware to fix the bootloop...
my friend have tab 7 plus and i'm planning to flash jb on it...is the stock JB recovery free from the brickbug?
Click to expand...
Click to collapse
I guess it is safe becoz someone did it already and it did not got brick.. if i were you.. after flashing jb.. flash the CWM.. then from there do the wiping
Sent from my GT-P6200 using XDA Premium HD app
goodwellbest said:
No, just ICS Stock Rom with .pit file
P6200 pit file in this thread (http://forum.xda-developers.com/showthread.php?t=1667886) works fine
Click to expand...
Click to collapse
I used the pit file and the ics stock and flashed using odin, the flashing went off smoothly with odin saying success. But after booting mine stuck at the samsung animation for eternity. Again I had no other alternative than flash jb back again.
Sent from my GT-P6200 using xda premium
seking said:
I used the pit file and the ics stock and flashed using odin, the flashing went off smoothly with odin saying success. But after booting mine stuck at the samsung animation for eternity. Again I had no other alternative than flash jb back again.
Sent from my GT-P6200 using xda premium
Click to expand...
Click to collapse
Did you check option re-partition in Odin?
By the way, stuck at SS logo is quite often happened if you did not wipe. You should try to perform full wipe.
There is an issue related to wipe using ICS stock recovery, you should use Odin to flash CWM recovery (without .pit file) and use CWM recovery to wipe.
seking said:
I used the pit file and the ics stock and flashed using odin, the flashing went off smoothly with odin saying success. But after booting mine stuck at the samsung animation for eternity. Again I had no other alternative than flash jb back again.
Sent from my GT-P6200 using xda premium
Click to expand...
Click to collapse
when you are stuck in bootloop flash cwm recovery and do a full wipe..that will fix it...avoid full reset using stock recovery to prevent brickbug
Hey guys its me again, I didnt resolve the ram issue so I want to get back to Android 4.1.2 but I dont know where to find it. Ive installed one with just PDA file and its getting stuck in SAMSUNG and desnt turn on. I guess I need a ROM with full PIT,PDA,CSC files. Does someone has one? Or atleast where can I find one.
DranzerGig said:
Hey guys its me again, I didnt resolve the ram issue so I want to get back to Android 4.1.2 but I dont know where to find it. Ive installed one with just PDA file and its getting stuck in SAMSUNG and desnt turn on. I guess I need a ROM with full PIT,PDA,CSC files. Does someone has one? Or atleast where can I find one.
Click to expand...
Click to collapse
Go sammobile, firmwares, create account, search firmware(4.1.2 and ur region) and download it, then flash via odin.
Sent from my GT-I9105P using XDA Premium 4 mobile app
rs tony said:
Go sammobile, firmwares, create account, search firmware(4.1.2 and ur region) and download it, then flash via odin.
Sent from my GT-I9105P using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thanks for the answer but u didn't read what I wrote. I've downloaded one from sammobile but it contains only PDA file and after installation it gets stuck in SAMSUNG logo and doesn't turn on. Someone told me that I need a ROM with all PIT,PDA,CSC files to downgrade. And thats what Im asking for - for a rom with all the three files.
DranzerGig said:
Thanks for the answer but u didn't read what I wrote. I've downloaded one from sammobile but it contains only PDA file and after installation it gets stuck in SAMSUNG logo and doesn't turn on. Someone told me that I need a ROM with all PIT,PDA,CSC files to downgrade. And thats what Im asking for - for a rom with all the three files.
Click to expand...
Click to collapse
Oh, that isn't true, just reset ur phone from recorvery. U need only that PDA file. Just factory reset
Edit: before flash go to Stock recorvery and factory reset and wipe cashe and u should not have any problems
rs tony said:
Oh, that isn't true, just reset ur phone from recorvery. U need only that PDA file. Just factory reset
Edit: before flash go to Stock recorvery and factory reset and wipe cashe and u should not have any problems
Click to expand...
Click to collapse
You should better flash cwm first because the stock recovery deletes everything!!!
Sent from my GT-I9105P using XDA Free mobile app
safariking said:
You should better flash cwm first because the stock recovery deletes everything!!!
Sent from my GT-I9105P using XDA Free mobile app
Click to expand...
Click to collapse
You're on 4.2.2 and want to revert to 4.1.2.When you flash the stock 4.1.2,go to stock recovery and make a factory reset and then wipe cache partition.
Hello mates, I have a I9003 which would not get past the 'Samsung' boot logo. I already tried flashing a stock ROM from sammobile.com but still the problem persists.
Tried PIT+BOOTLOADER+MODEM+PHONE+CSC,
MODEM+PHONE+CSC,
PIT+PDA (ONE FILE PACKAGE)
ONLY PDA (ONE FILE PACKAGE)
Nothing works, it is still stuck. I cannot wipe data/factory reset since I can't access stock recovery. Though going to download mode is not a problem.
Any fix for this? Or should I flash another stock ROM?
Try without sim card and flash cf root after full ddlf.
Sent from my GT-I9003 using XDA Free mobile app
I have made some progress, I think. While after flashing CF-Root for DDLF2 after clean installing it, I've waited for the phone to boot.
Now, it booted to the same Samsung I9003 boot animation, but after a while, I think it booted into recovery and started to wipe/install, though I'm not sure because the texts were going fast.
One thing I remembered was something with unable to mount /data among others. I saw other yellow texts, and also red texts, which seems to be errors (since I've used a CWM with other phones a couple of times).
After that, it got stuck to like a loading icon, like what you see when a video is buffering in Youtube, then reboots after a while to a stuck Samsung I9003 boot animation again.
Please help me mates, would be highly appreciated.
Without sim and external sdcard try to go to recovery and wipe user data and then boot.
Sent from my GT-I9003 using XDA Free mobile app
sam_777 said:
Without sim and external sdcard try to go to recovery and wipe user data and then boot.
Sent from my GT-I9003 using XDA Free mobile app
Click to expand...
Click to collapse
The thing is, I cannot boot to recovery mode with the 3 button combo. Only download mode mate.
Is there anything that I could flash in Odin that would reboot the phone to recovery mode?
jephimax said:
The thing is, I cannot boot to recovery mode with the 3 button combo. Only download mode mate.
Is there anything that I could flash in Odin that would reboot the phone to recovery mode?
Click to expand...
Click to collapse
Try flashing BCK CF-root universal. I think there was a beta 15rc7 version somewhere in the BAM kernel thread. It does include a recovery.
Only for GB ROMs, not Kitkat/JB ones.
Hetalk said:
Try flashing BCK CF-root universal. I think there was a beta 15rc7 version somewhere in the BAM kernel thread. It does include a recovery.
Only for GB ROMs, not Kitkat/JB ones.
Click to expand...
Click to collapse
I actually did that earlier, but the thing is as I've said is that I cannot boot to recovery with the 3-button combo. What I was hoping for is a file or kernel or anything that would automatically reboot the phone to 'recovery mode' after flashing it through Odin.
jephimax said:
I actually did that earlier, but the thing is as I've said is that I cannot boot to recovery with the 3-button combo. What I was hoping for is a file or kernel or anything that would automatically reboot the phone to 'recovery mode' after flashing it through Odin.
Click to expand...
Click to collapse
Ummm. Not sure if I've seen that done before.
Sorry man.
Try adb reboot recovery. Not sure about it.
Sent from my GT-I9003 using XDA Free mobile app
Hetalk said:
Ummm. Not sure if I've seen that done before.
Sorry man.
Click to expand...
Click to collapse
Well, that worked after flashing a stock ROM with .pit on I9100, though I don't know about the I9003
sam_777 said:
Try adb reboot recovery. Not sure about it.
Sent from my GT-I9003 using XDA Free mobile app
Click to expand...
Click to collapse
ADB would not work with a phone stuck phone. Recovery I think is my only change.
sam_777 said:
Try adb reboot recovery. Not sure about it.
Sent from my GT-I9003 using XDA Free mobile app
Click to expand...
Click to collapse
ADB wont work from download mode.
I'm sure you've tried this before, but can you try flashing complete ddlf2 package from here.
This has never failed me, yet. It's my fallback if everything else doesn't work.
All the best
Hetalk said:
ADB wont work from download mode.
I'm sure you've tried this before, but can you try flashing complete ddlf2 package from here.
This has never failed me, yet. It's my fallback if everything else doesn't work.
All the best
Click to expand...
Click to collapse
I'll try in a bit after DLing the package. Should I flash this several times to work? Should I flash once with PIT and BL, then just CSC, PHONE, and MODEM?
jephimax said:
I'll try in a bit after DLing the package. Should I flash this several times to work? Should I flash once with PIT and BL, then just CSC, PHONE, and MODEM?
Click to expand...
Click to collapse
Flash all 5 at the same time. See the snapshot shown in that thread.
Also, try a different odin version (i think 1.85 worked best for me) if it fails.
Hetalk said:
Flash all 5 at the same time. See the snapshot shown in that thread.
Also, try a different odin version (i think 1.85 worked best for me) if it fails.
Click to expand...
Click to collapse
Flashed it and it actually booted to recovery mode. I'll list some of the errors that arose:
E:/format_volume:rfs format failed on /dev/block/mmcblk0p3
Data wipe failed
Also tried the 'apply update from sdcard', and shows:
E:/failed to mount /sdcard (File exists)
E:/failed to mount /sdcard (Invalid argument)
Now I'll try to flash CWM to it and hopefully boots to recovery again and flash a custom ROM :fingers-crossed:
Well, I think another progress has been made, after flashing the DDLF2 firmware again, I waited for about 7 minutes and it got past the Samsung I9003 boot logo, and it goes to the Samsung boot animation, and after that, stuck at a boot loop.
Check it
http://forum.xda-developers.com/showthread.php?t=2727679
Sent from my GT-I9003 using XDA Free mobile app
sam_777 said:
Check it
http://forum.xda-developers.com/showthread.php?t=2727679
Sent from my GT-I9003 using XDA Free mobile app
Click to expand...
Click to collapse
So maybe the internal mmc is corrupted. I'm not sure one to follow but definitely not the one with the wonder go program since how can I enable USB debugging if it won't even boot. Should I try to flash DDLF2 with inserting a microSD card? Or should I remove the internal mmc, which I've read in another thread was kind of successful but a little hazardous.
Try to flash froyo 2.2 with pit. Logic is to reformat the structure of the memory.
Sent from my GT-I9003 using XDA Free mobile app
sam_777 said:
Try to flash froyo 2.2 with pit. Logic is to reformat the structure of the memory.
Sent from my GT-I9003 using XDA Free mobile app
Click to expand...
Click to collapse
I really appreciate the help mate. Would you refer me to a link for the 2.2 stock ROMs? As I only find GB firmwares, mostly old stock ROM links are down.
May find here
http://forum.xda-developers.com/showthread.php?t=2742279
Sent from my GT-I9003 using XDA Free mobile app