Database Info

[I9003] XXKPH + XXKPE Gingerbread Rooted [GUIDE]

Good News Guys
At last I have Rooted The [I9003] XXKPE Gingerbread Firmware
Updated Guide :
XXKPH
1.) After Flashing to new Firmware , Go to Downloading Mode By pressing volume down + menu button + power button and Flash the Phone Using the PDA file of the [I9003][CWM] ClockworkMod Recovery porting for I9003
(GT-I9003_PDA-XXKPE-fixed.tar)
GT-I9003_PDA-XXKPE-fixed.tar
2.) Root USing SOC
3.) flash PDA with the normalboot.img.tar attached below
http://forum.xda-developers.com/showpost.php?p=16737945&postcount=146
Enjoy !!!
XXKPE
Guide For Rooting
Note:Before rooting, make sure your Samsung I9003 Driver is already installed if not you will stuck up at "Waiting for device"
1.) After Flashing (2 times [unknown CSC problem]) To the New ROM (XXKPE) Go to Downloading Mode By pressing volume down + menu button + power button and Flash the Phone Using the PDA file of the [I9003][CWM] ClockworkMod Recovery porting for I9003
(GT-I9003_PDA-XXKPE-fixed.tar)
GT-I9003_PDA-XXKPE-fixed.tar
2.) Now You Can Root The Phone Using Any SuperOneClick (kernel panic occurs like in KP9 & kp7 - no problem)
(I Used SuperOneClickv2.0b1-ShortFuse)
NOTE: After rooting, you wont have busybox, so if you require commands like cp, download busybox installer from market and install busybox.

Great work. Will try tomorrow.. Lets wait for feedbacks about this..
Sent from my GT-I9003 using XDA Premium App

Isn't this the same thing as that chinese guy said? Wifi works? Connecting is one thing, Actual loading of a page is another

where is normalboot.img.tar ?

Misledz said:
Isn't this the same thing as that chinese guy said? Wifi works? Connecting is one thing, Actual loading of a page is another
Click to expand...
Click to collapse
I think so part.. Only this is more detailed and understandable
Sent from my GT-I9003 using XDA Premium App

vivekkalady said:
This Is the Most Important Step
3.) Now go back to the downloading Mode (volume down + menu button + power button) and flash the PDA file I am Attaching
normalboot.img.tar
Click to expand...
Click to collapse
You didn't attack this file. Is the one included in the original PDA file of the firmware?

kishen80 said:
where is normalboot.img.tar ?
Click to expand...
Click to collapse
I think the normalboit.img.tar he means is the cwm..
Sent from my GT-I9003 using XDA Premium App

amarisi said:
You didn't attack this file. Is the one included in the original PDA file of the firmware?
Click to expand...
Click to collapse
yes but you cant install the file directly
that's why i created this version of file
anyway it works Fine
That's what we all Want

ephraim033 said:
I think the normalboit.img.tar he means is the cwm..
Sent from my GT-I9003 using XDA Premium App
Click to expand...
Click to collapse
No dude
I have attached the file
First the attachment failed
now i have uploaded the file correctly
Check the first post

vivekkalady said:
yes but you cant install the file directly
that's why i created this version of file
anyway it works Fine
That's what we all Want
Click to expand...
Click to collapse
Thank you, just flashed. Gonna check if it worked well.
EDIT: it works flawlessly. Thank you again.

amarisi said:
You didn't attack this file. Is the one included in the original PDA file of the firmware?
Click to expand...
Click to collapse
iLol'd ATTAACKKK!!!
Srs Note: It's on Skin's page if anyone is curious the KP9 Release

vivek good job bro...thanks all working now

Will link this to my thread
Sent from my GT-I9003 using XDA Premium App

now wifi it ok
thanks
root ok
wifi ok
superuser ok

Do i need to flash twice before flashing the GT-I9003_PDA-GB-KP9- UPDATED.tar?

Yeap, It works! .Good Job Viv! The net is alive!

vivekkalady said:
Good News Guys
At last I have Rooted The [I9003] XXKPE Gingerbread Firmware
Guide For Rooting
1.) After Flashing To the New ROM (XXKPE) Go to Downloading Mode By pressing volume down + menu button + power button and Flash the Phone Using the PDA file of the [I9003][CWM] ClockworkMod Recovery porting for I9003
(GT-I9003_PDA-GB-KP9- UPDATED.tar)
GT-I9003_PDA-GB-KP9- UPDATED.tar
2.) Now You Can Root The Phone Using Any SuperOneClick
(I Used SuperOneClickv2.0b1-ShortFuse)
(Check Your Wifi It will Not Work)
This Is the Most Important Step
3.) Now go back to the downloading Mode (volume down + menu button + power button) and flash the PDA file I am Attaching
normalboot.img.tar
By doing This Step you will get the Wifi And Everything You have lost by flashing to the first file for CWT
I am attaching the Screenshot of My phone
Click to expand...
Click to collapse
good job dude..! tnx..!ill try this tomorrow..

it proves that there is nothing in android that we cant hack...!!!

christopher2018 said:
Do i need to flash twice before flashing the GT-I9003_PDA-GB-KP9- UPDATED.tar?
Click to expand...
Click to collapse
Thats up to You dude
Because If your camera and your CSC (*#1234#) is working fine then you dont have to flash twice
(I have to flash twice for my CSC to be valid. first t was showing unknown)
This method is just for rooting (this doesnt depend on how many times you flash)

WOOOOOOHO
at last after reading lots of lots(all gb updates) pages,
vivek just u make me to flash my phone to GB
thanks i will share result currently i am downloading

unroot i9003

hey guys need some help...
1. i've rooted my phone and its running on XXKPU + CF-ROOT
2. i want to unroot it back to my original DXKP9 , i just need to flash the the tar file as pda.. or do i need to
- flash also the other files from XXKPE eg GT-I9003-CSC-MULTI-OXAKPE.tar

Even I'm pretty new to Samsung, butto get to stock XXKPU/XXKPQ,
I would recommend the following steps.
1. Download stock xxkpe.
2. Via Odin in download mode flash the pit file (check repartition option)
Screen would turn black. This option would repartition in rfs format.
Restart the phone in download mode.
3. Then other files need to flashed, pda, csc, modem(phone) and bootloader.
Google which file to selected in which option.
4. after flashing this, you would be on stock xxkpe.
5. Then flash stock xxkpu pda file. Restart.
This would remove the cwm add well as root permissions.
Press thanks if helped.
Sent from my GT-I9003 using xda premium

well i was on stock DXKP9
then i went over to XXKPU + CF-root...
and now i want to go back to stock DXKP9
ill take note of your info.. but not sure if that is the correct way... or not

If you use cf root just go to recovery mode there is root/unroot buttong there.

UserX007 said:
well i was on stock DXKP9
then i went over to XXKPU + CF-root...
and now i want to go back to stock DXKP9
ill take note of your info.. but not sure if that is the correct way... or not
Click to expand...
Click to collapse
Following those is correct . But replaced kpu with dxkp9
Sent from my GT-I9003 using Tapatalk 2

marshygeek said:
If you use cf root just go to recovery mode there is root/unroot buttong there.
Click to expand...
Click to collapse
chongns said:
Following those is correct . But replaced kpu with dxkp9
Sent from my GT-I9003 using Tapatalk 2
Click to expand...
Click to collapse
thanks guys ... wanna send my phone for warranty, cause got some weird **** problem, making calls after get connected like 3 to 6 seconds the call automatically terminates..

[HELP] How to unroot and install trhe stock firmware?

Hi guys
I have a problem...i have rooted the galaxy s scl of my friend but now he want it unrooted.
I have the frankestain mod rom and i should unroot it and install a stock firmware..
How could i do it?

Flash kpe before flashing to another stock firmware such as kpu.
Sent from my GT-I9003 using xda premium

Flash XXKPE with Odin. The flash any other firmware of your choice

I still dont understand why everyone say to flash kpe first...
Seriously plz explain it to me !!
Sent from my GT-I9003 using xda app-developers app

Plz everyone here from the next time do this kind of chit-chat in general thread this is Development thread.
And for ans flash any stock rom using odin you will be unroot and on stovk rom too. For steps follow this thread.
http://forum.xda-developers.com/showthread.php?t=1133787

nicsptl said:
Plz everyone here from the next time do this kind of chit-chat in general thread this is Development thread.
And for ans flash any stock rom using odin you will be unroot and on stovk rom too. For steps follow this thread.
http://forum.xda-developers.com/showthread.php?t=1133787
Click to expand...
Click to collapse
I have done it but now in the phone there's only the bootanimation but nothing else...

G.Galante said:
I have done it but now in the phone there's only the bootanimation but nothing else...
Click to expand...
Click to collapse
you got bootloop, flash XXKPE+PIT it can solve your prob after flash that firmware,flash another stable firmware than XXKPE

simratcs said:
I still dont understand why everyone say to flash kpe first...
Seriously plz explain it to me !!
Sent from my GT-I9003 using xda app-developers app
Click to expand...
Click to collapse
Because kpe is came with full firmware that is (bootloader, pda, phone,csc)
And when you use pit file you need all these files
To unroot single pda file also works
If any problems facing then flash with pit+kpe
Correct me if I am wrong
Sent from my GT-I9003 using xda premium

why KPE+PIT
OK, first for all, we have 2 type of firmware.
1. one package .tar file.
2. component type firmware .tar file.
for one package type, you only see one tar file which are flash using odin place in the PDA box. this is the incremental patch from you current working phone. you find all the data still in place.
for the component type firmware, you will have 3 or 4 tar file to flash using odin and place it in respective box. you will need to reset you phone, all the data will gone.
so, why must using component type, if need to flash to stock. Becuase you already corropted the firmware.
1. you have change the recovery partition and rooted and with custome kernel.
2. you have converted to EXT4, (stock is rfs)
3. you have bootloop because the above you have done.
others which having same thing done but not at bootloop, its becuase their done the home work (search and read). this i'm very sure about it.
so, if you have the boot loop, mean you done some step wrong.
so to save you, follow the instruction on the link above you should be fine.
legend:
pit file - this is partition information table, to tell the odin and phone how to prepare the partition for flashing.
example: I9003_latona_20110114.pit
PDA tar: contant all the system partition.
example: I9003DXKF1-REV08-ALL-low-CL1020446.tar
CSC tar: contant of regional specified setting
example: GT-I9003-CSC-MULTI-OLBKB2.tar
Modem: contant the hardware setting.
example:MODEM_I9003DXKB2_REV_00_CL863799.tar
bootloader, do not use this, if you are not upgrading from Froyo to GB. as this is a very important portion of you phone. ( the name already tell you that, "boot" "loader") do not mass with it.
same as PC, when you infected by virus or you have done someting corrupted the file of windows, you will need a reformat or reinstall OS.
hence, for the phone, flash the KPE+PIT
same as PC, when you wanted to update the windows update, you will just click the update and the windows patch file will install, same as you flash the 1 package firmware.
that all, hope you can understant

chongns said:
why KPE+PIT
OK, first for all, we have 2 type of firmware.
1. one package .tar file.
2. component type firmware .tar file.
for one package type, you only see one tar file which are flash using odin place in the PDA box. this is the incremental patch from you current working phone. you find all the data still in place.
for the component type firmware, you will have 3 or 4 tar file to flash using odin and place it in respective box. you will need to reset you phone, all the data will gone.
so, why must using component type, if need to flash to stock. Becuase you already corropted the firmware.
1. you have change the recovery partition and rooted and with custome kernel.
2. you have converted to EXT4, (stock is rfs)
3. you have bootloop because the above you have done.
others which having same thing done but not at bootloop, its becuase their done the home work (search and read). this i'm very sure about it.
so, if you have the boot loop, mean you done some step wrong.
so to save you, follow the instruction on the link above you should be fine.
legend:
pit file - this is partition information table, to tell the odin and phone how to prepare the partition for flashing.
example: I9003_latona_20110114.pit
PDA tar: contant all the system partition.
example: I9003DXKF1-REV08-ALL-low-CL1020446.tar
CSC tar: contant of regional specified setting
example: GT-I9003-CSC-MULTI-OLBKB2.tar
Modem: contant the hardware setting.
example:MODEM_I9003DXKB2_REV_00_CL863799.tar
bootloader, do not use this, if you are not upgrading from Froyo to GB. as this is a very important portion of you phone. ( the name already tell you that, "boot" "loader") do not mass with it.
same as PC, when you infected by virus or you have done someting corrupted the file of windows, you will need a reformat or reinstall OS.
hence, for the phone, flash the KPE+PIT
same as PC, when you wanted to update the windows update, you will just click the update and the windows patch file will install, same as you flash the 1 package firmware.
that all, hope you can understant
Click to expand...
Click to collapse
That i already know man..
But why kpe first..
Does it like increases the battery life or what ??
Everyone says to flash kpe...
But what about ddkp3 ??
Sent from my GT-I9003 using xda app-developers app

simratcs said:
That i already know man..
But why kpe first..
Does it like increases the battery life or what ??
Everyone says to flash kpe...
But what about ddkp3 ??
Sent from my GT-I9003 using xda app-developers app
Click to expand...
Click to collapse
Kpe is the foundation of the other stock rom.

simratcs said:
That i already know man..
But why kpe first..
Does it like increases the battery life or what ??
Everyone says to flash kpe...
But what about ddkp3 ??
Sent from my GT-I9003 using xda app-developers app
Click to expand...
Click to collapse
no that "must" use KPE, it depend on your choose, as long as it is component type firmware, i use DXKF1, so far so good. and most importantly you can use it with pit file. note: 1 package tar file can not use with pit file.
if you want to solve the bootloop, either you do trouble shoot the rootcause, or close you eyes, and once and for all "reformat" your phone.
that why we need the pit.
hope you "already" know that.
BTW, i see no different on KPE on battery life. i use DXKP9 it is a GB, and flash Bam Kernel. battery life is good 1.5day per charge.

[Q] How to revert back to stock DDLF2 from rooted state?

Hi,
I have rooted DDLF2 (using CF-ROOT). Now that I no more need root (stopped using an app that needed root), I need to get back to stock DDLF2.
I have already unrooted it using recovery mode > unroot.zip method.
All I need is 100% samsung stock DDLF2 on the phone now, without the cf-kernel, cf-recovery and apps that the rooting process brought in.
Please advise...
Thanks

Dude thats simple...
Just flash ddlf2 using odin and u are good to go !!
Sent from my GT-I9003

simratcs said:
Dude thats simple...
Just flash ddlf2 using odin and u are good to go !!
Sent from my GT-I9003
Click to expand...
Click to collapse
Yes, just clean flash and the root is gone
Sent from my GT-I9003 using Tapatalk 2

agnivo007 said:
Hi,
I have rooted DDLF2 (using CF-ROOT). Now that I no more need root (stopped using an app that needed root), I need to get back to stock DDLF2.
I have already unrooted it using recovery mode > unroot.zip method.
All I need is 100% samsung stock DDLF2 on the phone now, without the cf-kernel, cf-recovery and apps that the rooting process brought in.
Please advise...
Thanks
Click to expand...
Click to collapse
take the CR-ROOT zp file, open up with winrar, replace the file with DDLF2 normalboot.img, than flash with odin PDA. you will get back the stock kernel or maybe you will have boot looping, if not bootlooping, reboot the phone once, than factory reset.
try at your own risk.

chongns said:
take the CR-ROOT zp file, open up with winrar, replace the file with DDLF2 normalboot.img, than flash with odin PDA. you will get back the stock kernel or maybe you will have boot looping, if not bootlooping, reboot the phone once, than factory reset.
try at your own risk.
Click to expand...
Click to collapse
Dude i think he is a new member so dont tell him such stuff that is a bit confusing for a newbie...
Let him just clean flash ddlf2
Sent from my GT-I9003

flash xxkpe then ddlf2

karanmirchandani96 said:
flash xxkpe then ddlf2
Click to expand...
Click to collapse
Hi, can I flash xxkpe on CWM recovery mode and update to DDLF2 from kies?
Just wanted to know can stock ROMs can be flashed from CWM recovery, just like cROM.

No u have to flash them via Odin only.
sent from Samsung galaxy S i9003 Remics JB v3

Thanks for the Info!!!

THANKS!
Flashed via ODIN as PDA, did wipe, cache clean and now I'm set...

hi i flashed ddlf2 everything is working except my wifi is there any solution?

agnivo007 said:
Hi,
I have rooted DDLF2 (using CF-ROOT). Now that I no more need root (stopped using an app that needed root), I need to get back to stock DDLF2.
I have already unrooted it using recovery mode > unroot.zip method.
All I need is 100% samsung stock DDLF2 on the phone now, without the cf-kernel, cf-recovery and apps that the rooting process brought in.
Please advise...
Thanks
Click to expand...
Click to collapse
use the android development section and download the ddlf2 files then use odin to flash it

amsad said:
hi i flashed ddlf2 everything is working except my wifi is there any solution?
Click to expand...
Click to collapse
Maybe this happened because you didn't clean install so here are the steps:
Download XXKPE from here.
Flash XXKPE by following the XXKPE install instructions (the archive should contain odin3 v1.83 or v1.85 if not here is odin3 v1.85)
Download DDLF2 from here (DDMF1 is the latest value pack so it's smoother and with better battery life)
Install DDFL2 or DDMF1( recommended) by following the value pack instructions (use only odin3 v3.04)
that's it, enjoy your stock rom
if this helped you ...hit the thanks button pls

[Q] Bootloop after StockRom flashing

Heyo everyone
I'm coming from cm10.1 and now i wanted to go back to stock.
so I've downloaded I9105PXXAMC2 from samfirmware.com
unfortunately after flashing via odin i got bootloop
i've tried to wipe from android recovery but then there's only a red triangle
is there any solution?
it's almost impossible for me to download another firmware because my internet speed sucks so massive

Gh3ttoKiLL4 said:
Heyo everyone
I'm coming from cm10.1 and now i wanted to go back to stock.
so I've downloaded I9105PXXAMC2 from samfirmware.com
unfortunately after flashing via odin i got bootloop
i've tried to wipe from android recovery but then there's only a red triangle
is there any solution?
it's almost impossible for me to download another firmware because my internet speed sucks so massive
Click to expand...
Click to collapse
Install CWM with odin and wipe your data cache and dalvik cache from there then it will boot up fine

safariking said:
Install CWM with odin and wipe your data cache and dalvik cache from there then it will boot up fine
Click to expand...
Click to collapse
I think installing clockworkmod for wiping isn't an option. The op flashed stock Rom probably because he wants his warranty back
Installing clockworkmod again would void it again. If the stock Rom you downloaded is the one you had before rooting, then try flashing it again. If it's not, then download your originally out of box stock Rom and flash it with Odin.
Like...the same baseband version as the one you had before any modification of your system
Sent from my GT-I9105P using xda premium

Brian_SGW_CM9 said:
I think installing clockworkmod for wiping isn't an option. The op flashed stock Rom probably because he wants his warranty back
Installing clockworkmod again would void it again. If the stock Rom you downloaded is the one you had before rooting, then try flashing it again. If it's not, then download your originally out of box stock Rom and flash it with Odin.
Like...the same baseband version as the one you had before any modification of your system
Sent from my GT-I9105P using xda premium
Click to expand...
Click to collapse
You need to wipe it otherwise it won't boot up and if you had cm10.1 you must wipe your internal sd card to
if you install cyanogenmod and you odin back to stock rom the stock rom will simply not boot if no wipe was done!!!

safariking said:
You need to wipe it otherwise it won't boot up and if you had cm10.1 you must wipe your internal sd card to
if you install cyanogenmod and you odin back to stock rom the stock rom will simply not boot if no wipe was done!!!
Click to expand...
Click to collapse
I thought flashing through Odin already wipes..
So if I want to Odin back. With the clockworkmod, I first wipe, then flash stock. Right?
Sent from my GT-I9105P using xda premium

No
odin back first and after that install cwm and wipe!
Sent from my awesome S2 Plus

safariking said:
No
odin back first and after that install cwm and wipe!
Sent from my awesome S2 Plus
Click to expand...
Click to collapse
Can You please be more specific? I'm trying to install stock rom, and it's intering loop on boot. Trying to instal CWM via Odin - no success.

Did you wipe before flashing via Odin?
Sent from my GT-I9105P using XDA Premium 4 mobile app

Brian_SGW_CM9 said:
Did you wipe before flashing via Odin?
Sent from my GT-I9105P using XDA Premium 4 mobile app
Click to expand...
Click to collapse
That's a question too... How to do wipe, if all I have is official bootloader, with debugging OFF, and loop / stuck on SUMSUNG logo?
(I don't care of any kind of warranty, just want to boot up this brick with ANY ROM!)

borsiknet said:
That's a question too... How to do wipe, if all I have is official bootloader, with debugging OFF, and loop / stuck on SUMSUNG logo?
(I don't care of any kind of warranty, just want to boot up this brick with ANY ROM!)
Click to expand...
Click to collapse
Can you reach download mode?
Sent from my GT-I9105P using XDA Premium 4 mobile app

Brian_SGW_CM9 said:
Can you reach download mode?
Sent from my GT-I9105P using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yes, I'm trying all original firmware from sammobile, that appropriate to this model. Sometimes it geting custom BIN, and bootloader taking it back to samsung official.

borsiknet said:
Yes, I'm trying all original firmware from sammobile, that appropriate to this model. Sometimes it geting custom BIN, and bootloader taking it back to samsung official.
Click to expand...
Click to collapse
Yep, that's the only way
Sent from my GT-I9105P using XDA Premium 4 mobile app

Brian_SGW_CM9 said:
Yep, that's the only way
Sent from my GT-I9105P using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Maybe any way to know origin of the phone by S/N to which country he belong?

borsiknet said:
Maybe any way to know origin of the phone by S/N to which country he belong?
Click to expand...
Click to collapse
Find your country's name on sammobile. I mean of the firmware page of sammobile
Sent from my GT-I9105P using XDA Premium 4 mobile app

Brian_SGW_CM9 said:
Find your country's name on sammobile. I mean of the firmware page of sammobile
Sent from my GT-I9105P using XDA Premium 4 mobile app
Click to expand...
Click to collapse
There are no my contry ROM. I stucked with bootloops and debug options OFF. What to do???! It's driving me crazy...

After almost two weeks of seeking for solutions all over internet, the problem was solved. First of all there are no way to root without debuging off via odin o any other tool. All what you have, is just to look for your original firmware of the phone, and it supposed to be four file package.
Looks like:
FULL_CSC_I9105PXXAMC2_I9105POXAAMC1_I9105PXXAMC1_DBT.tar.md5
FULL_MODEM_I9105PXXAMC2_I9105POXAAMC1_I9105PXXAMC1_DBT.tar.md5
FULL_PDA_I9105PXXAMC2_I9105POXAAMC1_I9105PXXAMC1_DBT.tar.md5
s2ve.pit
In this case it was german phone so files end with DBT.
CSC - as CSC
MODEM - as CP or PHONE
PDA - as AP or PDA
and pit file for re-partition.
The name of whole package is GT-I9105P-DBT-I9105PXXAMC2_Service-Firmware.zip
For those asking for delete dalvik/cache/factory reset, the solution is - RE-PARTITION!
I used also option Nand Erase All, just to be sure I delete everything.
All other operations goes as usual in Odin.
I can't post links here, bat me mercy on those looking for solution for days and weeks long.
So here is link that I found on some forum that leading to (thanx Goshhhh!!!) to Google docs, so download was just 5 min. long.
Here is German (DBT) package, and some other usefull links. Use G. translator to understand.
h t t p : / / galaxysclub.ru/obzor-osnovnyh-funkcij-obsuzhdenie-i-reshenie-problem/2111-pomogite-s-i9105-proshivki-dlya-i9105 . html
Just remove spaces, where needed. This is a Russian forum. Respect and thousand thanx to Сергей, author of usefull post with links provided, once again THANX a lot, Sergej!

borsiknet said:
After almost two weeks of seeking for solutions all over internet, the problem was solved. First of all there are no way to root without debuging off via odin o any other tool. All what you have, is just to look for your original firmware of the phone, and it supposed to be four file package.
Looks like:
FULL_CSC_I9105PXXAMC2_I9105POXAAMC1_I9105PXXAMC1_DBT.tar.md5
FULL_MODEM_I9105PXXAMC2_I9105POXAAMC1_I9105PXXAMC1_DBT.tar.md5
FULL_PDA_I9105PXXAMC2_I9105POXAAMC1_I9105PXXAMC1_DBT.tar.md5
s2ve.pit
In this case it was german phone so files end with DBT.
CSC - as CSC
MODEM - as CP or PHONE
PDA - as AP or PDA
and pit file for re-partition.
The name of whole package is GT-I9105P-DBT-I9105PXXAMC2_Service-Firmware.zip
For those asking for delete dalvik/cache/factory reset, the solution is - RE-PARTITION!
I used also option Nand Erase All, just to be sure I delete everything.
All other operations goes as usual in Odin.
I can't post links here, bat me mercy on those looking for solution for days and weeks long.
So here is link that I found on some forum that leading to (thanx Goshhhh!!!) to Google docs, so download was just 5 min. long.
Here is German (DBT) package, and some other usefull links. Use G. translator to understand.
h t t p : / / galaxysclub.ru/obzor-osnovnyh-funkcij-obsuzhdenie-i-reshenie-problem/2111-pomogite-s-i9105-proshivki-dlya-i9105 . html
Just remove spaces, where needed. This is a Russian forum. Respect and thousand thanx to Сергей, author of usefull post with links provided, once again THANX a lot, Sergej!
Click to expand...
Click to collapse
If anyone have problem with bootloop when flash original rom, solution is simple. Just go to recovery. Samsung has stock recovery. Wipe data/factory reset and reboot phone. Thats all . PS to go to recovery turn off phone. Wait 3 seconds. hold home buton, volume up and power buton in same tame.

jaskof1 said:
If anyone have problem with bootloop when flash original rom, solution is simple. Just go to recovery. Samsung has stock recovery. Wipe data/factory reset and reboot phone. Thats all . PS to go to recovery turn off phone. Wait 3 seconds. hold home buton, volume up and power buton in same tame.
Click to expand...
Click to collapse
That was a problem, loops after flashing with Odin.

jaskof1 said:
If anyone have problem with bootloop when flash original rom, solution is simple. Just go to recovery. Samsung has stock recovery. Wipe data/factory reset and reboot phone. Thats all . PS to go to recovery turn off phone. Wait 3 seconds. hold home buton, volume up and power buton in same tame.
Click to expand...
Click to collapse
Well this worked for me just fine

Boot into cwm
Go tot mounts and storage
Format everything (no ext sdcard
Flash firmware with Odin andere cwm would be deleted