Database Info

unroot i9003

hey guys need some help...
1. i've rooted my phone and its running on XXKPU + CF-ROOT
2. i want to unroot it back to my original DXKP9 , i just need to flash the the tar file as pda.. or do i need to
- flash also the other files from XXKPE eg GT-I9003-CSC-MULTI-OXAKPE.tar

Even I'm pretty new to Samsung, butto get to stock XXKPU/XXKPQ,
I would recommend the following steps.
1. Download stock xxkpe.
2. Via Odin in download mode flash the pit file (check repartition option)
Screen would turn black. This option would repartition in rfs format.
Restart the phone in download mode.
3. Then other files need to flashed, pda, csc, modem(phone) and bootloader.
Google which file to selected in which option.
4. after flashing this, you would be on stock xxkpe.
5. Then flash stock xxkpu pda file. Restart.
This would remove the cwm add well as root permissions.
Press thanks if helped.
Sent from my GT-I9003 using xda premium

well i was on stock DXKP9
then i went over to XXKPU + CF-root...
and now i want to go back to stock DXKP9
ill take note of your info.. but not sure if that is the correct way... or not

If you use cf root just go to recovery mode there is root/unroot buttong there.

UserX007 said:
well i was on stock DXKP9
then i went over to XXKPU + CF-root...
and now i want to go back to stock DXKP9
ill take note of your info.. but not sure if that is the correct way... or not
Click to expand...
Click to collapse
Following those is correct . But replaced kpu with dxkp9
Sent from my GT-I9003 using Tapatalk 2

marshygeek said:
If you use cf root just go to recovery mode there is root/unroot buttong there.
Click to expand...
Click to collapse
chongns said:
Following those is correct . But replaced kpu with dxkp9
Sent from my GT-I9003 using Tapatalk 2
Click to expand...
Click to collapse
thanks guys ... wanna send my phone for warranty, cause got some weird **** problem, making calls after get connected like 3 to 6 seconds the call automatically terminates..

Help to remove kyrillos kernel and reinstall Factory foryo firmware

Sir,
I have tried to remove kyrillos, which i successfully installed earlier and now want to restore the factory firmware back.
I have used Odin to flash factory firmware downloaded from samfirmware and apollo_0531.ops downloaded from net.
But now the phone has stuck at Samsung logo.
please help..I dont understand technical part of android development and just foloow the instructions available on net.
May be I have made a mistake which i should not have done .
Pls help me get of it
Thanx in advance

Just flash stock 2.2 froyo firmware with odin.put the ops file in ops i.e 1st row and firmware means. .Tar file in last row of odin.then put phone in download mode and connect to pc then flash it.
Flashing guide:- http://forum.xda-developers.com/showthread.php?t=873645
Samsung Galaxy 3 (I5801/I5800) Flashing Guide
Sent from my GT-I5800 using xda premium

Thanks Pratikmore for this prompt reply. I did exactly what you told.
Downloaded the latest firware from sammobile site.
Downloaded the same ops as i used for kyrillos ..i.e apollo_0531
Had put the OPS in the first line and .tar file in the last row
and flashed the phone...
Result is the Phone is not booting and stuck at the samsung logo screen...
Can you please suggest any mistake I have done..or something else i can try.
Thanks in advance
Tried exactly
pratikmore said:
Just flash stock 2.2 froyo firmware with odin.put the ops file in ops i.e 1st row and firmware means. .Tar file in last row of odin.then put phone in download mode and connect to pc then flash it.
Flashing guide:- http://forum.xda-developers.com/showthread.php?t=873645
Samsung Galaxy 3 (I5801/I5800) Flashing Guide
Sent from my GT-I5800 using xda premium
Click to expand...
Click to collapse

kk1480 said:
Thanks Pratikmore for this prompt reply. I did exactly what you told.
Downloaded the latest firware from sammobile site.
Downloaded the same ops as i used for kyrillos ..i.e apollo_0531
Had put the OPS in the first line and .tar file in the last row
and flashed the phone...
Result is the Phone is not booting and stuck at the samsung logo screen...
Can you please suggest any mistake I have done..or something else i can try.
Thanks in advance
Tried exactly
Click to expand...
Click to collapse
Plz flash 2.1eclair firmware first then flash 2.2 froyo firmware with same ops file,then sure phone will boot.
Sent from my GT-I5800 using xda premium

Thanks again Pratikmore!
I am again stuck...can u suggest where can i get eclair firmware.
I have searched a lot...but it seems the firmware has been deleted from almost every site.
You have been a great help sir...Heartiest Thanks!
pratikmore said:
Plz flash 2.1eclair firmware first then flash 2.2 froyo firmware with same ops file,then sure phone will boot.
Sent from my GT-I5800 using xda premium
Click to expand...
Click to collapse

kk1480 said:
Thanks again Pratikmore!
I am again stuck...can u suggest where can i get eclair firmware.
I have searched a lot...but it seems the firmware has been deleted from almost every site.
You have been a great help sir...Heartiest Thanks!
Click to expand...
Click to collapse
Flash a firmware without bootloader. Samfirmwares has bootloaders so search for them on android development
Sent from my GT-I5800 using xda app-developers app

kk1480 said:
Thanks again Pratikmore!
I am again stuck...can u suggest where can i get eclair firmware.
I have searched a lot...but it seems the firmware has been deleted from almost every site.
You have been a great help sir...Heartiest Thanks!
Click to expand...
Click to collapse
Download and flash 2.1 eclair from here :- http://forum.xda-developers.com/showthread.php?t=1497261
[Stock Firmwares] with removed bootloader [no hardbrick risk]
Sent from my GT-I5800 using xda premium

pratikmore said:
Download and flash 2.1 eclair from here :- http://forum.xda-developers.com/showthread.php?t=1497261
[Stock Firmwares] with removed bootloader [no hardbrick risk]
Sent from my GT-I5800 using xda premium
Click to expand...
Click to collapse
NO NEED TO FLASH 2.1! JUST DATA+CACHE WIPE REQUIRED.
Just get to recovery via 3-button combo - VOL+, VOL-, HOME, POWER, then release POWER after you see something on the screen. After you will get to recovery, release all the buttons. Then, scroll down via VOL- and VOL+ to WIPE DATA/FACTORY RESET press home and scroll to YES, press again HOME. Then after its done, scroll to WIPE CACHE PARTITION - press home, scroll to YES, then, after its done, scroll to REBOOT SYSTEM NOW (1st option) and hit HOME button again. That's it! No need of theese unnecessary steps of flashing another firmware. DATA/CACHE will get converted by this process back to Samsung's RFS filesystem (Kyrillos' ROM has ext4 and ext2 - That's why it has been not booting) and you will not get bootloop again

help me plz

hello
First im new to xda
and i need your help
i have samsung galaxy sl gt-i9003
i need to root it
i have tried
1. super one click 2.3.3.0
its the most use for root my device and it doesn't work it make
the steps from 1 to 7 and it DOES NOT MAKE ANY DRIVER
and doesnt make restart to phone
so its not rooted
i checked it
and i used 2. unlock root 2.3.1 and 2.4.2\
its always fail to get premonition to get shell root
always type'' failed to get shell root ! ''
i tried to make root with z4root
that the app make root without use a computer
and its always log out
with the box that typed force close
and i have make the usb debugging
maked install apps with unknown sources
having samsung kies on my laptop that i work at when i try to make root
i need to root my device
what do i do
my device is
samsung galax sl gt-i9003 frimware 2.3.6 official not custom rom
kernel [email protected] #1
build number GINGERBREAD.JPKPE
anyone can help me and give me an idea to make root to my device
thx all

just flash bams kernel from this thread http://forum.xda-developers.com/showthread.php?t=1355675

hey friend thx but
i dont know how to make flash to kernel
and is it need root ?????

Listen ,,,,
U need to download Odin v1.85
1.Download Bam Kernel 15rc5
2.Open Odin
3.Click PDA
4.Select the Bam Kernel u have downloaded...
5.Bring the phone in recovery mode using
Power + Volume Down + Home button at same time
Press it till u see yellow android logo
6.Connect ur phone to pc
7.And then click start...
Now u are rooted and have a custom recovery on ur device !!
ENJOY !!
Sent from my GT-I9003 using xda app-developers app

simratcs said:
Listen ,,,,
U need to download Odin v1.85
1.Download Bam Kernel 15rc5
2.Open Odin
3.Click PDA
4.Select the Bam Kernel u have downloaded...
5.Bring the phone in recovery mode using
Power + Volume Down + Home button at same time
Press it till u see yellow android logo
6.Connect ur phone to pc
7.And then click start...
Now u are rooted and have a custom recovery on ur device !!
ENJOY !!
Sent from my GT-I9003 using xda app-developers app
Click to expand...
Click to collapse
@simratcs
Can you begin a new thread for latest applications that are needed to be downloaded from playstore
users can be benefited out of it.
My humble request.
sorry for off topic

wrishaba said:
@simratcs
Can you begin a new thread for latest applications that are needed to be downloaded from playstore
users can be benefited out of it.
My humble request.
sorry for off topic
Click to expand...
Click to collapse
K dude....
I will make a detailed thread for it...
Btw look for new bootanimation in the themes and apps section by me...
It deadmau5
Sent from my GT-I9003 using xda app-developers app

i9003 reflash

hi guys
i just got this phone but i'm a bit blur about it
here's the info
firmware : 2.3.6
baseband : JXKP3
build : gingerbread.JVKPB
just wanna know, would it be safe if i use ODIN to flash the phone with I9003DDLF2_I9003ODDLF2_INU.zip ?
or should i flash it with JXKP3 first then flash the DDLF2 ?
i wanted a clean format/reflash.i dont mind losing root as i can root it again next time
thanks

fitree said:
hi guys
i just got this phone but i'm a bit blur about it
here's the info
firmware : 2.3.6
baseband : JXKP3
build : gingerbread.JVKPB
just wanna know, would it be safe if i use ODIN to flash the phone with I9003DDLF2_I9003ODDLF2_INU.zip ?
or should i flash it with JXKP3 first then flash the DDLF2 ?
i wanted a clean format/reflash.i dont mind losing root as i can root it again next time
thanks
Click to expand...
Click to collapse
dont worry mate... since you are on 2.3.6 just go ahead and do it JXKP3
download the CF-Root file from here for JXKP3
http://forum.xda-developers.com/showthread.php?t=1331253
also download Odin
and follow these steps
1.Open ODIN
2.get you phone in download mode (holding power + home + volume down).
3.Connect your phone to PC via USB cable.(its better to make sure your antivirus and firewall are disabled and you have correct samsung USB drivers installed)
4.Check if your phone is detected by odin you must see color yellow in the box with the port no. and a word "Added!" in log screen.
5.Now click PDA then browse the .tar file (place the downloaded CF-root file i.e, your JXKP3 file in this case).Then click Start.
6.Wait till its done,dont panic.Phone will boot itself. Your now rooted. But you need to wipe cache in recovery mode to do this hold power + home + volume up then clear cache and dalvik cache. Reboot. Done.

mustafahussain said:
dont worry mate... since you are on 2.3.6 just go ahead and do it JXKP3
download the CF-Root file from here for JXKP3
http://forum.xda-developers.com/showthread.php?t=1331253
also download Odin
and follow these steps
1.Open ODIN
2.get you phone in download mode (holding power + home + volume down).
3.Connect your phone to PC via USB cable.(its better to make sure your antivirus and firewall are disabled and you have correct samsung USB drivers installed)
4.Check if your phone is detected by odin you must see color yellow in the box with the port no. and a word "Added!" in log screen.
5.Now click PDA then browse the .tar file (place the downloaded CF-root file i.e, your JXKP3 file in this case).Then click Start.
6.Wait till its done,dont panic.Phone will boot itself. Your now rooted. But you need to wipe cache in recovery mode to do this hold power + home + volume up then clear cache and dalvik cache. Reboot. Done.
Click to expand...
Click to collapse
err..
i'm not asking about on how to root
i'm asking is it OK for me to directly flash my phone to DDLF2 using ODIN ?
i'm on JXKP3 right now

fitree said:
err..
i'm not asking about on how to root
i'm asking is it OK for me to directly flash my phone to DDLF2 using ODIN ?
i'm on JXKP3 right now
Click to expand...
Click to collapse
appologies I didnt noticed that.
for me when I was rooted on 2.3.6 I could flash anything... but I am not sure if its a safe way

mustafahussain said:
appologies I didnt noticed that.
for me when I was rooted on 2.3.6 I could flash anything... but I am not sure if its a safe way
Click to expand...
Click to collapse
Its safe mate. If you back from A4, you need to flash XXKPE+Pit then flash DDLF2. In another word, its safe, as long you follow the guide and be careful.
Sent from my GT-I9003 using xda app-developers app

Go ahead its very safe even I have flashed my phone with ddlf2 many time no problems till now
Sent from my GT-I9300 using xda premium

Rich'Dawg' said:
Its safe mate. If you back from A4, you need to flash XXKPE+Pit then flash DDLF2. In another word, its safe, as long you follow the guide and be careful.
Sent from my GT-I9003 using xda app-developers app
Click to expand...
Click to collapse
thanks !
well,in my case, do i need to use the .pit file aswell ?
i've downloaded the firmware and it only contains one file which is the .tar.md5

nikhil18 said:
Go ahead its very safe even I have flashed my phone with ddlf2 many time no problems till now
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
thanks !
well,in my case, do i need to use the .pit file aswell ?
i've downloaded the firmware and it only contains one file which is the .tar.md5

fitree said:
thanks !
well,in my case, do i need to use the .pit file aswell ?
i've downloaded the firmware and it only contains one file which is the .tar.md5
Click to expand...
Click to collapse
Go ahead, its safe. You are using Gingerbread right? I forgot, :silly:. If you are using A4, bright idea to download pit.
And after reading the 1st post, yes its safe mate, just remember follow the guide and remember the thanks button under my post, cheers
P.S: Do not fear of soft/hard brick, if you are Gingerbread user. The farthest you can get is bootloop, unless you are flashing i9000 stock ROM.
Sent from my GT-I9003 using xda app-developers app

reflash 9003
i have a 9003 with 2.6.35.7.cl882023 kernel
base band i9003ddle1
firmware 2.3.6
i want to reflash it using odin .
should i directly flash the zip file?

[Q] Bootloop after StockRom flashing

Heyo everyone
I'm coming from cm10.1 and now i wanted to go back to stock.
so I've downloaded I9105PXXAMC2 from samfirmware.com
unfortunately after flashing via odin i got bootloop
i've tried to wipe from android recovery but then there's only a red triangle
is there any solution?
it's almost impossible for me to download another firmware because my internet speed sucks so massive

Gh3ttoKiLL4 said:
Heyo everyone
I'm coming from cm10.1 and now i wanted to go back to stock.
so I've downloaded I9105PXXAMC2 from samfirmware.com
unfortunately after flashing via odin i got bootloop
i've tried to wipe from android recovery but then there's only a red triangle
is there any solution?
it's almost impossible for me to download another firmware because my internet speed sucks so massive
Click to expand...
Click to collapse
Install CWM with odin and wipe your data cache and dalvik cache from there then it will boot up fine

safariking said:
Install CWM with odin and wipe your data cache and dalvik cache from there then it will boot up fine
Click to expand...
Click to collapse
I think installing clockworkmod for wiping isn't an option. The op flashed stock Rom probably because he wants his warranty back
Installing clockworkmod again would void it again. If the stock Rom you downloaded is the one you had before rooting, then try flashing it again. If it's not, then download your originally out of box stock Rom and flash it with Odin.
Like...the same baseband version as the one you had before any modification of your system
Sent from my GT-I9105P using xda premium

Brian_SGW_CM9 said:
I think installing clockworkmod for wiping isn't an option. The op flashed stock Rom probably because he wants his warranty back
Installing clockworkmod again would void it again. If the stock Rom you downloaded is the one you had before rooting, then try flashing it again. If it's not, then download your originally out of box stock Rom and flash it with Odin.
Like...the same baseband version as the one you had before any modification of your system
Sent from my GT-I9105P using xda premium
Click to expand...
Click to collapse
You need to wipe it otherwise it won't boot up and if you had cm10.1 you must wipe your internal sd card to
if you install cyanogenmod and you odin back to stock rom the stock rom will simply not boot if no wipe was done!!!

safariking said:
You need to wipe it otherwise it won't boot up and if you had cm10.1 you must wipe your internal sd card to
if you install cyanogenmod and you odin back to stock rom the stock rom will simply not boot if no wipe was done!!!
Click to expand...
Click to collapse
I thought flashing through Odin already wipes..
So if I want to Odin back. With the clockworkmod, I first wipe, then flash stock. Right?
Sent from my GT-I9105P using xda premium

No
odin back first and after that install cwm and wipe!
Sent from my awesome S2 Plus

safariking said:
No
odin back first and after that install cwm and wipe!
Sent from my awesome S2 Plus
Click to expand...
Click to collapse
Can You please be more specific? I'm trying to install stock rom, and it's intering loop on boot. Trying to instal CWM via Odin - no success.

Did you wipe before flashing via Odin?
Sent from my GT-I9105P using XDA Premium 4 mobile app

Brian_SGW_CM9 said:
Did you wipe before flashing via Odin?
Sent from my GT-I9105P using XDA Premium 4 mobile app
Click to expand...
Click to collapse
That's a question too... How to do wipe, if all I have is official bootloader, with debugging OFF, and loop / stuck on SUMSUNG logo?
(I don't care of any kind of warranty, just want to boot up this brick with ANY ROM!)

borsiknet said:
That's a question too... How to do wipe, if all I have is official bootloader, with debugging OFF, and loop / stuck on SUMSUNG logo?
(I don't care of any kind of warranty, just want to boot up this brick with ANY ROM!)
Click to expand...
Click to collapse
Can you reach download mode?
Sent from my GT-I9105P using XDA Premium 4 mobile app

Brian_SGW_CM9 said:
Can you reach download mode?
Sent from my GT-I9105P using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yes, I'm trying all original firmware from sammobile, that appropriate to this model. Sometimes it geting custom BIN, and bootloader taking it back to samsung official.

borsiknet said:
Yes, I'm trying all original firmware from sammobile, that appropriate to this model. Sometimes it geting custom BIN, and bootloader taking it back to samsung official.
Click to expand...
Click to collapse
Yep, that's the only way
Sent from my GT-I9105P using XDA Premium 4 mobile app

Brian_SGW_CM9 said:
Yep, that's the only way
Sent from my GT-I9105P using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Maybe any way to know origin of the phone by S/N to which country he belong?

borsiknet said:
Maybe any way to know origin of the phone by S/N to which country he belong?
Click to expand...
Click to collapse
Find your country's name on sammobile. I mean of the firmware page of sammobile
Sent from my GT-I9105P using XDA Premium 4 mobile app

Brian_SGW_CM9 said:
Find your country's name on sammobile. I mean of the firmware page of sammobile
Sent from my GT-I9105P using XDA Premium 4 mobile app
Click to expand...
Click to collapse
There are no my contry ROM. I stucked with bootloops and debug options OFF. What to do???! It's driving me crazy...

After almost two weeks of seeking for solutions all over internet, the problem was solved. First of all there are no way to root without debuging off via odin o any other tool. All what you have, is just to look for your original firmware of the phone, and it supposed to be four file package.
Looks like:
FULL_CSC_I9105PXXAMC2_I9105POXAAMC1_I9105PXXAMC1_DBT.tar.md5
FULL_MODEM_I9105PXXAMC2_I9105POXAAMC1_I9105PXXAMC1_DBT.tar.md5
FULL_PDA_I9105PXXAMC2_I9105POXAAMC1_I9105PXXAMC1_DBT.tar.md5
s2ve.pit
In this case it was german phone so files end with DBT.
CSC - as CSC
MODEM - as CP or PHONE
PDA - as AP or PDA
and pit file for re-partition.
The name of whole package is GT-I9105P-DBT-I9105PXXAMC2_Service-Firmware.zip
For those asking for delete dalvik/cache/factory reset, the solution is - RE-PARTITION!
I used also option Nand Erase All, just to be sure I delete everything.
All other operations goes as usual in Odin.
I can't post links here, bat me mercy on those looking for solution for days and weeks long.
So here is link that I found on some forum that leading to (thanx Goshhhh!!!) to Google docs, so download was just 5 min. long.
Here is German (DBT) package, and some other usefull links. Use G. translator to understand.
h t t p : / / galaxysclub.ru/obzor-osnovnyh-funkcij-obsuzhdenie-i-reshenie-problem/2111-pomogite-s-i9105-proshivki-dlya-i9105 . html
Just remove spaces, where needed. This is a Russian forum. Respect and thousand thanx to Сергей, author of usefull post with links provided, once again THANX a lot, Sergej!

borsiknet said:
After almost two weeks of seeking for solutions all over internet, the problem was solved. First of all there are no way to root without debuging off via odin o any other tool. All what you have, is just to look for your original firmware of the phone, and it supposed to be four file package.
Looks like:
FULL_CSC_I9105PXXAMC2_I9105POXAAMC1_I9105PXXAMC1_DBT.tar.md5
FULL_MODEM_I9105PXXAMC2_I9105POXAAMC1_I9105PXXAMC1_DBT.tar.md5
FULL_PDA_I9105PXXAMC2_I9105POXAAMC1_I9105PXXAMC1_DBT.tar.md5
s2ve.pit
In this case it was german phone so files end with DBT.
CSC - as CSC
MODEM - as CP or PHONE
PDA - as AP or PDA
and pit file for re-partition.
The name of whole package is GT-I9105P-DBT-I9105PXXAMC2_Service-Firmware.zip
For those asking for delete dalvik/cache/factory reset, the solution is - RE-PARTITION!
I used also option Nand Erase All, just to be sure I delete everything.
All other operations goes as usual in Odin.
I can't post links here, bat me mercy on those looking for solution for days and weeks long.
So here is link that I found on some forum that leading to (thanx Goshhhh!!!) to Google docs, so download was just 5 min. long.
Here is German (DBT) package, and some other usefull links. Use G. translator to understand.
h t t p : / / galaxysclub.ru/obzor-osnovnyh-funkcij-obsuzhdenie-i-reshenie-problem/2111-pomogite-s-i9105-proshivki-dlya-i9105 . html
Just remove spaces, where needed. This is a Russian forum. Respect and thousand thanx to Сергей, author of usefull post with links provided, once again THANX a lot, Sergej!
Click to expand...
Click to collapse
If anyone have problem with bootloop when flash original rom, solution is simple. Just go to recovery. Samsung has stock recovery. Wipe data/factory reset and reboot phone. Thats all . PS to go to recovery turn off phone. Wait 3 seconds. hold home buton, volume up and power buton in same tame.

jaskof1 said:
If anyone have problem with bootloop when flash original rom, solution is simple. Just go to recovery. Samsung has stock recovery. Wipe data/factory reset and reboot phone. Thats all . PS to go to recovery turn off phone. Wait 3 seconds. hold home buton, volume up and power buton in same tame.
Click to expand...
Click to collapse
That was a problem, loops after flashing with Odin.

jaskof1 said:
If anyone have problem with bootloop when flash original rom, solution is simple. Just go to recovery. Samsung has stock recovery. Wipe data/factory reset and reboot phone. Thats all . PS to go to recovery turn off phone. Wait 3 seconds. hold home buton, volume up and power buton in same tame.
Click to expand...
Click to collapse
Well this worked for me just fine

Boot into cwm
Go tot mounts and storage
Format everything (no ext sdcard
Flash firmware with Odin andere cwm would be deleted