Related
Hello all... got kind of a big problem that i at the moment don't have an answer to,..
inastalled advanced configuration tool 3.2 on HTC Polaris, the first crash i had was when I enabled animation for menus... (the start menu turned black and the polaris froze), but when i managed to start the advanced configuration tool i unchecked it and it was ok,...
the MAJOR PROBLEM accured when I set the touch screen sensitivity, because the touch part of the screen is inresponsive,.. meaning it does not work at all,.. tryed very hart pressing but it doesn't do it.. the problem is because i can't reach eg start menu or the lower 2 shortcuts with hard button cursor (the wheel)... gestures work however, so i can call the touch flo cube but am not able to select anything, and sam thing goes for enetering pin,.. so i'm not able to make phone calls at the moment.. did few hard resets, and uninstalled the adv. conf. tool but nothing helped... can anyone tel me where (and how to get there) can i adjust this back to normal, i wanted to do this in the advanced configuration tool 3.2 but the problem is you cant make any changes since the screen doesn't work,.. same with reinstalling the program, i can select to install it on a card but canot "click" on next since the screen doesn't do it and the hard keys "can't go there"
so really really someone help me please...
thnx
Are you sure you hard reset and this problem went away or did you mean soft reset?
Maybe aligning the screen will help reset the pressure? Click the button in the middle of the wheel and the GPS button at the same time, the Windows align screen pops up. See if that helps.
I find it very hard to believe that you hard reset and the touch screen sensitivity is still not there. That can't be right.
Hi,
thanx for the reply,... another problem that accoured afterwards was that my friend held the end button (wich locks the keys, screen) and the phone was additionally locked... and literally nothing (again NOTHING ) helped, spent 5 hours trying to save the situation,.. i did soft reset (so your assumption was right) but when later tryed hard reset it probably wasn't done since the instructions say you do it with holding gps and iExplorer buttons while soft reseting it... this resulted in getting the "hard reset screen" wich says to confirm hard reset with hitting the send button, wich unfortunatelly i wasnt able to find in hard keys, and nothing else but this warning text was on the screen as well.. so in the end it probably ended upo wit soft resetting it, anyways it didn't help,... i decided to reinstall the rom i downloaded on htc official site,... it went thru ok and the phone is , though out of the box at least functional,... but in the end, i must admit that am a little surprised this happened with this tool pack (i actually avoided altering the registers just in order to avoid this kid of situations since i don't really know much about these things)... was expecting it to work (in my case) a bit better, more stable. All i wanted really was to get a bit louder speaker volume when ringing and ability to alter the HTC home toolbar, since i find the weather screen totaly irreliable and never really use it, so i thought I would have sth there that i might really have some use of..
well nevertheless.. the phone is working, that's all that matters at the mom so i can again start finishing my phd wich i am defending in a week
PS. the fact that you can not do practically anything without the touch screen just sucks big time, if i compare it to the mouse on pc,... i saved the situation many times with the keybord .. in 1 word strange
take care
My Mobile
Perhaps you should have tryied out the "My Mobile" aplication that allows you to use your mobile from a PC.
It shows a windows with the mobile screen and you can touch it and use the mobile like if you was touching the REAL mobile...
Late for that solucion, perhaps another with that problem can solve it this way...
Chears
@gastonfama: am not sure this would help, since a friend that has htc diamond has this tool pack on and it work k ok on his phone,.. that's why i predicted that it is going to be stable enough on mnie as well,.. so in my thinking, if the 2 htc that are rather alike had such different "reaction", than an emulation would be even less comparable to mine, thanks though
Had the same problem with Schaps_AdvancedConfig and wrong HKEY_LOCAL_MACHINE\Drivers\TouchPanel\PressureThreshold setting.
XML I used had "200" as advised value (system default is 2908!),
after changing you could hit it with a hammer and nothing.
Managed to set is back to recommended value 9000 using MyMobiler app and all problems gone.
See also HKEY_LOCAL_MACHINE\Drivers\TouchPanel\PressureThreshold
sys default is 18866, I use now 19866 and I'm happy
Check tips&tricks thread
I got the same problem, I wanna to install "My Mobiler" but due to the screen is locked, I can't continue the installation, any help ?
well as far as I see here (forgot how i installed it after previous post) you have an exe here :
http://www.mymobiler.com/downsafe.aspx
so you will install it from the pc anyways, but how will you make the confirm on where to install it (mybe if you put storage card out and there will be only 1 memory option, but you will still have to confirm installation i guess).. i wasnt able to confirm without the screen on polaris,.. maybo on some other phone
double post...mistake
I had that same screen not working problem after tweaking the phone with advanced config 3.3, 3.2, 3.1, only hardware buttons work.
Problem can only be solved by Hard Reset. Version 2.2 I think is the only one that works (not thoroughly tested though)
I am hoping that you guys can help.
My spouse purchase a HTC Fuze a little while back. She used it for
a few months. She was then deployed to Iraq. The phone has been
off for the last 3 months. It was working fine when last used. Recently,
I powered it up and the touch screen is not functioning properly.
You can not use it to dial phone numbers, send texts, and such.
Basically, it does not function correctly really. When it just sitting,
it will roll through options on the screen as if it is being touched
and will not stay on the home setting.
What could the problem be? Can this be fixed? I have tried a soft reset
which hasn't worked. It is disturbing since this is a fairly new phone.
Thanks in Advance!
try re-calibrating the screen! if that fails - hard rest it.
How do you re-calibrate the screen?
settings-system-screen
I am under the settings menu but I don't see anything that says system.
Bear in mind that if I have to use the touch screen to get to it then it
would be a no go.
it's a tab in the button if you get there by moving down fron the lowests icon then you can move to system
its a tab in what button. Can you some one give me the exact step by step to get there?
try using the circular thing (joystick) to get there! i'm running a custom rom, so your settings layout may be different.
circular joystick to get where.
Can I have a step by step? I can't find system anywhere.
My touch screen displays but it does not do anything when
I touch it. I have to use the physical buttons.
to go up and down in that menu but if you have a stock rom you may have a different folder for "system", i'm not sure.
Figured out where that is now. I didn't realize that
you were talking about the start button for windows.
I went to that section and it asks you to go through the
align screen process but it does not respond to the taps
of the wand. Is that how we recalibrate?
If this doesnt work, what can be done to get the screen working?
try this: http://wiki.xda-developers.com/index.php?pagename=Raphael_For_Beginners#Hardx20.Reset
hard reset your phone
If I do that, I will lose all my contacts and data on my phone, right?
How do I prevent this?
your best bet is to hope you have "PIM backup" and use it to back up everything, including custom folders. hopefully you can navigate using the hardware keyboard. (custom backup allows you to pack up specific folders and/or files). back it up to your storage card, THEN hard reset it.
also, if you have your phone's contact list synced via active sync, just hard reset and it'll restore your synced contact list.
good luck
EDIT: please delete this. double post of preceding reply.
Will a hard reset actually fix this problem with the touch screen
or this just a try it and see approach?
Contacts saved on my SIM will not be affected by a hard reset, right?
Do a hard reset then,
Yeah, if you already save your contacts in the sim then go ahead and do a hard reset. Just follow the start up procedure on the phone, hope this will solve your problem. Please let us know.
Will a hard reset actually fix this problem with the touch screen
or this just a try it and see approach?
man, nobody knows for sure. it will give you a blank phone, just like the first dday you turned it on (software wise). if the screen has some hardware damage - you will know after the hard-reset. let us know how it went!
so what is actual purpose of a hard reset over a soft reset?
Why would this work to reset the screen over a soft reset?
Hi guys, I've had my G2x for a while and I am just running stock GB that I got via the OTA update. My phone is rooted with the UnlockRoot program, but other than that, I have no recovery or anything flashed and I've never used nvflash.
I've tried searching through the stickies and I can't seem to find any simple guide to flash the recovery with NVflash. Can someone tell me how to do this or point me in the right direction? Thank you!
http://forum.xda-developers.com/showthread.php?t=1056847
Sent from my LG-P999 using XDA App
Thank you!! Any reason to use CWM 4 over 5? Or should I just go with 5?
All right I must be a total idiot here but I got CWM 5 flashed and it seems to work except for one thing. The volume buttons move the selected menu item up and down, but what do I press to select an option?? All the soft keys seem to either make a black screen with a hat appear or they move the selected item.
For the life of me I can't seem to make it actually pick an option and I feel like an idiot, lol...
userno69 said:
All right I must be a total idiot here but I got CWM 5 flashed and it seems to work except for one thing. The volume buttons move the selected menu item up and down, but what do I press to select an option?? All the soft keys seem to either make a black screen with a hat appear or they move the selected item.
For the life of me I can't seem to make it actually pick an option and I feel like an idiot, lol...
Click to expand...
Click to collapse
Lol the soft buttons do actually do stuff but just use hardware keys. Power to select.
I have not found the answer for my question anywhere on the net, so I will ask here, since this seems the place where people know what they are talking about regarding HTC Sensation.
Couple of days ago something went completely wrong with my Sensation. 1 moment im using it, no problem, put it in my pocket.
I get it out to use it again, screen doesnt respond AT ALL. I cannot unlock it by touch, I cannot turn if off (off button just puts the screen on 'sleep' and back again on 'locked'.) Volume buttons dont work.
I do keep getting all the messages, calls, whatever, I see everything happening, but cannot do anything.
As I learnt its either the digitzer that is done with it (why? nothing happen, it was just in my pocket, not hit, not wet, no cracks...), or its a software problem. (If someone have a idea what it is, you can jump in here and help me out).
But firstly, I would like to do a backup of all my stuff on the HTC. Ofcourse when I plug it in the PC it asks which mode it has to go in, tethering, usb device, sync, but I cannot choose this (touchscreen not working remember).
Is there some way to backup all my contacts, and stuff on the phone without being able to use it? The device is not rooted, so no nAndroid backup... (can I maybe to the root/nAndroid backup from the PC?)?
The thing with the 'pin' and contact in the cover doenst solve my issue, nor anything else I have found up until now. (Took also a look inside the phone, no connectors seem to be loose/broken..)
Any sort of help is very welcome since I do not really not where to start to fix this issue.
hi,
take a look here http://forum.xda-developers.com/showthread.php?t=1239238
it might help you
rzr86 said:
hi,
take a look here http://forum.xda-developers.com/showthread.php?t=1239238
it might help you
Click to expand...
Click to collapse
Yeah already had a look at this, this is the 'pin with contact to the back cover' I was referring to. This is not it I think (I tried already, nothing happened). But also in my case the phone doens't respond AT ALL on touch (in most cases that this method work, the response was bugging/late/blabla).
Nobody knows how to backup data from a not-rooted HTC Sensation with a non-working touchscreen??
dborota said:
Nobody knows how to backup data from a not-rooted HTC Sensation with a non-working touchscreen??
Click to expand...
Click to collapse
Don't think its possible, unless perhaps you have USB debugging enabled already?
If you do then perhaps it's possible to do juponut bear S-off, install clockwork mod or something and do a nandroid if you get the key presses right... But you say the volume keys aren't functioning? So that might not work.
Ok so with nobody to help for over a month, I just decided to do some stuff.
First I replaced the digitizer, new digitzer, nothing changes. Same issues. Screen doesnt respond, volume buttons neither, nothing works, power button just gets it off the sleep mode. (In bootloader Volume buttons work...)
So second, unfortunately lost all my data now, I did the factory reset. Result: nothing changed! Screen still does not respond, volume buttons neither, power button just gets it off the sleep mode.
What is wrong with this phone? Why does it not work anymore? All of a sudden it stopped responding, and these nor digitzer nor software seem the issue. What is it then?
Please help me out!
Hello.
Since a long time i have a big issue with my rooted s8+.
When i want to long press (tap and hold) on my screen to select a text, sometime it works sometime it doesn't work (it do like i pressed the screen and releases it immediately when it does not work as short press).
Until a few days ago i thought it was a random problem.
But i discovered a few days ago that this problem happens ALL THE TIME when i need to long press on the center of the screen and NEVER HAPPENS when i long press on the top or bottom of the screen.
Now when i want to select a text in the center of the screen, i just have to scroll the text up or down and then the long press works.
Does anybody have the same issue on his s8+?
Is there an app to definitly check this issue that happens only on long press and never on short press ?
How can i fix it?
Thank you for your help
(sorry my english is very bad i hope you have understood my question)
Open up your phone app as if you're going to call someone and dial *#0*#
(Star pound zero star pound)
This will get you into maintenance mode where you can trouble shoot many things. Tap on "touch" and drag finger all over the boxes on the screen in the shape of a rectangle with an X through it. This will allow u to see how your phone is responding to touch. Hope this gives u an idea as to where or if the issue is occurring. If not at least it's a pointer for phone issue trouble shooting.
Cheers!
Thank you for your answer.
I tried that and everything is ok on the touch test.
But after this test i just tried to select something on this page and i have the same issue. When i want to select in the center of the screen the tap and hold is not working.
I scroll a little the page and it is working.
It seem it just don't detect that i hold my finger. But detect normally when i just press with my finger.
I think i should send my phone to Samsung.
parisien99 said:
Thank you for your answer.
I tried that and everything is ok on the touch test.
But after this test i just tried to select something on this page and i have the same issue. When i want to select in the center of the screen the tap and hold is not working.
I scroll a little the page and it is working.
It seem it just don't detect that i hold my finger. But detect normally when i just press with my finger.
I think i should send my phone to Samsung.
Click to expand...
Click to collapse
I just tried with the page i put a screenshot in attachment to this post.
When i try a tap and hold (i tried several times) on the line "i scroll a little the page..." it does not work ( it just select the word on which i have put my finger but i can not extend the selection and i don't have the icon with copy past etc)
But when i tap and hold on the line starting by "of the screen the tap...." and the line starting with "it seem i just don't detect..." everything is normal.
parisien99 said:
I just tried with the page i put a screenshot in attachment to this post.
When i try a tap and hold (i tried several times) on the line "i scroll a little the page..." it does not work ( it just select the word on which i have put my finger but i can not extend the selection and i don't have the icon with copy past etc)
But when i tap and hold on the line starting by "of the screen the tap...." and the line starting with "it seem i just don't detect..." everything is normal.
Click to expand...
Click to collapse
Here's your troubleshooting steps. Try them each one at a time. If #1 doesn't work, then move on to #2, etc, until it's fixed.
1. Reboot phone
2. Clear cache in recovery
3. Start in Safe Mode
4. Factory Reset
5. Reflash stock, factory firmware with ODIN
If none of those fix the issue, then you will need to reach out to Samsung.
Mr. Orange 645 said:
Here's your troubleshooting steps. Try them each one at a time. If #1 doesn't work, then move on to #2, etc, until it's fixed.
1. Reboot phone
2. Clear cache in recovery
3. Start in Safe Mode
4. Factory Reset
5. Reflash stock, factory firmware with ODIN
If none of those fix the issue, then you will need to reach out to Samsung.
Click to expand...
Click to collapse
Thank you
I think most that it would be a hardware problem
But as my phone is rooted i will do all that before sending to samsung as i must install a stock rom before sending to Samsung.
But most of all i wanted to know if other people had also this issue.
parisien99 said:
Thank you
I think most that it would be a hardware problem
But as my phone is rooted i will do all that before sending to samsung as i must install a stock rom before sending to Samsung.
But most of all i wanted to know if other people had also this issue.
Click to expand...
Click to collapse
The steps I gave you actually eliminate it being a software problem, so it narrows it down to hardware.
Let us know if you're able to fix it, or have to send it to Samsung fie repair.
Mr. Orange 645 said:
The steps I gave you actually eliminate it being a software problem, so it narrows it down to hardware.
Let us know if you're able to fix it, or have to send it to Samsung fie repair.
Click to expand...
Click to collapse
Than you
I will do that in a few days.
But i just thinked about something.
I just updated my samsung firmware on dec 28. And i had this issue before the update.
When updating, for the root, i installed twrp and have done a complete wipe on twrp before installing magisk. (i still didn't find no way to root without wiping, if there is a way please tell me)
I think i have passed all these steps when i have done the update/root process. Am i right?
parisien99 said:
Than you
I will do that in a few days.
But i just thinked about something.
I just updated my samsung firmware on dec 28. And i had this issue before the update.
When updating, for the root, i installed twrp and have done a complete wipe on twrp before installing magisk. (i still didn't find no way to root without wiping, if there is a way please tell me)
I think i have passed all these steps when i have done the update/root process. Am i right?
Click to expand...
Click to collapse
I honestly don't know. I don't root. So I don't know the steps. Try them anyway, and if you end up having to do a factory reset, don't restore anything. Start completely fresh.
And installing STOCK UNROOTED firmware with ODIN will eliminate any issues associated with root.
parisien99 said:
Thank you for your answer.
I tried that and everything is ok on the touch test.
But after this test i just tried to select something on this page and i have the same issue. When i want to select in the center of the screen the tap and hold is not working.
I scroll a little the page and it is working.
It seem it just don't detect that i hold my finger. But detect normally when i just press with my finger.
I think i should send my
Did you try doing a factory reset? You could try that but it sounds as if it is a hardware issue. Get it in to samsung before warranty runs out. Good luck my friend!
Click to expand...
Click to collapse