DARKROOM INTERNATIONAL V2
We bring the expected and longed International V2. Everything made ??from scratch, base cover Xbsall Ics (XDA), with the kernel itself Team, Team spectacular mod and more nice .............
A slow to see the light, but we believe that a rom has gone very, very good. We hope comments and try how it work.
The rom is with right to work at 100%, and that everyone gets what interests you.
Has many settings, besides enhancing the rom tweaks inall aspects. Reading sd, screen sensitivity, 3G and wifi speed, reduced power, zipaling startup, defragmentation, etc .......
Besides Team own kernel with OC Cpu, Cpu UV, Oc ram, GPU OC, improved ram, init.d habiliado from the kernel, etc ....... and much more.
One novelty is to regulate yourselves the CPU voltage from SetCPU for example, we get 1.5 MHz of the CPU Oc. Here, as we know, each O3D is a world, therefore there will be terminals they will support and others do not.
Being able to regulate the voltage to frequency, we can adjust much consumption and regunlando well, we can get reduced consumption. Below we explain how to adjust this.
The Mod, c'mon, awesome job that gives unbeatable elegance to our gadgets, android envy of the world.
ONLY INSTALL IF YOU HAVE ICS ROM ported from the SU760, BY XBSALL
ONLY INSTALL IF YOU HAVE RECOVERY IN PARTITION
ROM
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CHANGELOG
- Base ICS Korean (Thanks XBsall)
- All translated into more than 30 languages
- Rooted and Deoxed
- Zipaling
- New gobernors
- New ways reading SD
- Kernel Darkroom
- Optimized Ram
- Boot optimized
- Improved SD card reading and much ......
- Tweak screen sensitivity
- Tweak scrolling
- Enhanced data rate 3G, wifi
- Tweak in wifi, less consumption
- Tweak battery consumption
- Boot Defragment
- And more ...... Tweaks
- Visual customization of the rom
- Battery in percent 1%
- Off mode CRT screen off
- Bravia Engine
- Improved sound AC! D Sound
- Camera Original retouched by Defcomg (14Nov.iArccamaraRC2) (Thanks)
- Camera JB 4.1.2
- Official JB Gallery 4.1.2
- Keyboard LG
- JB official Keyboard 4.1.2
- Face Unlock Unlock
- Apk sms
- ES File Explorer
- Busybox
- Led Tesla
- Quick Boot (to go directly to the recovery)
- The Official Team Darkroom Apk
- Team Wallpapers Darkroom
- More than we allow ourselves safe ........
KERNEL
First thank Pesach85 of xda that has taught me to compile a signed boot and solve certain problems with compiling the kernel binary.
It's been a long hard journey, as I lost my ubuntu and data, hence the long delay. Get to the point
Ramdisk Tweaks:
- Taskiller increased for better management of the RAM
- Load modules from ramdisk
Kernel Tweaks:
- Added "Voltage Control v2" (You can play either the voltage frequencies, so you can have as fecuencia you want to increase the voltage or down if your phone supports it. Set entity 750mV to 1500 mV. Advisable not shift from 1400mV. We are not responsible for any damage to your CPU)
- Overclock to 1500MHz!
- Added a lot more often for more battery saving.
75MHz, 150MHz, 250MHz, 350MHz, 450MHz, 600MHz, 858MHz, 10 08MHz, 1108MHz, 1208MHz, 1308MHz, 1350MHz, 1400MHz, 1500 MHz
- UNDERVOLT, enough to start you all.
- Added CPU Topology
- Set hotplug system as governor and adjusted.
- Added VR and SIO schedulers, and tight deadline. SIO as Set system scheduler.
- Added Lazy governor and governor Wheatley
- Used as binary to compile the latest version
- OC GPU to 384 MHz
- Added "Fsync Control"
- Added libraries to increase copying and moving data
- Added drivers for our GPU originals (ported from GN)
- GPU OC to 460Mhz
- Added a new frequency to the GPU. Now: 157.6 Mhz-384Mhz-460Mhz
- Added a new line voltage higher than stock for added stability at very high frequencies.
- Latency of 300 to 30.
Very fast and stable, and RAM management is infallible.
Well let me explain a few things, you can use at voltages as NSTools programs for editing (recommended), Perfomance, Voltage Control, SetCPU, Rom Toolbox ... etc
Finally the last point that I want to explain is the Fsync Control, this means that you can disable that can cause data loss in a crash / freeze and can also lead to problems if two or more processes accessing the same file. Furthermore disable reduces the number of operations by reducing battery consumption and increase system performance.
It can be disabled by creating a script, paste the following into or empty file and place it in / system / etc / init.d / named XXFsync (where XX is any number):
Code:
#!/sytem/bin/sh
echo 0 > /sys/class/misc/fsynccontrol/fsync_enabled
INSTALLATION
ONLY INSTALL IF YOU HAVE RECOVERY IN PARTITION
1. Put the zip in SD
2. Ask for carrying TWRP recovery:
WIPE ------ WIPE CACHE ------FACTORY RESET------SYSTEM
2a. Normal recovery for CWM:
WIPE CACHE------WIPE DAVIL CACHE------WIPE DATA------FORMAT SYSTEM------FORMAT DATA
3. Install zip
4. Reboot
It takes a little to start, patience ................... seems to stay frozen, but do not worry, it's normal, are more than 700mg of rom and takes to boot.
When configuring acabeis the first time around, restarting a few times, so that it works as it should and stabilizes. At first it costs apks open, but now see the difference when you start using it.
Download link: http://d-h.st/LO7
ROM INTERNATIONAL V2 WHITOUT MOD
Download link: http://d-h.st/tCA
If you want to put icons for phone, contacts, sms, mail in chrome as in the images of the launcher, stay above and clicking when you solteis appears a little circle with a brush, push up and you will see a screen with all the icons available. Marcais which querais and ready.
:laugh:Thanks to all who have donated, thank you:good:
Comments and hope you enjoy it.
To thanks cost nothing.
If you like our work, you can invite a few beers
RESERVED
international original kernel v2
Download
http://d-h.st/t2R
Thanks but i have one Question did you guys add ARABIC lang to this ROM
Would you please make a zip for us to flash original theme (setting, battery, call, ..etc) for this Rom. Thanks for your work!
hi, thank you for rom, it is perfect.
but i have only one problem, same of version 1 :
if i try to shutdown phone , it restart.
if i get shutdown and i link the battery charger, the phone turn on
please, if you can, help me
Click to expand...
Click to collapse
What version of u-boot and xloader hace you?
Enviado desde TheDarkRoom
Great work guys! I want flash the kernel ICS V1.0 of iodak, In this Rom can we install other kernel or have the same problem whit v1? Thanks!
Tank you
Sent from my LG-P925 using xda app-developers app
help!
I put it on my phone in TWRP recovery, and now it just restarts.
But before it was: WIPE ------ WIPE CACHE ------FACTORY RESET------SYSTEM
After install and i push reboot system button.
Now there is only the LG logo, vibrates and power off. :crying:
become unusable?
Before V1 on the phone was when it happened.
(I'm sorry, I'm Hungarian, and my English is bad) - Google Translate
shutdown problem solved
Click to expand...
Click to collapse
The problem has been corrected? Now it safe?
Thanks guys, even without overclocking this ROM feels very slick. I have found an issue with taking 3d pictures, the seems the saved pictures format and orientation is stuffed up. Another issue is that MMS will not send for me either with the included application. Would also like to request stock theme as well.
Sent from my LG-SU760 using xda app-developers app
"phone" APN for ATT Thrill
rom installed as advertised and everything works nicely (1408 overclock gave me some reboots so I knocked it back to 1350) The only bit of advice I have for att users is that the "phone" apn that allows up to 14mb speed instead of 7 is not included and needs to added by the user.
Rom Internatonal V2 without mod available in the first post
http://forum.xda-developers.com/showthread.php?p=36962696
The first time I set up and saved WIFI config ,but when I turned on WIFI, WIFI didn't connect. So I had to forget the network and set up it again, then it's worked perfectly.
This Rom's better than V5.2 - XBSALL ?
ecb41tza said:
Rom Internatonal V2 without mod available in the first post
http://forum.xda-developers.com/showthread.php?p=36962696
Click to expand...
Click to collapse
So this is just without the visual mods?
Sent from my LG-SU760 using xda app-developers app
---------- Post added at 02:58 PM ---------- Previous post was at 02:56 PM ----------
Has anyone had success with setting the cpu minimum below 250? Mine always freezes below 250 and randomly about 1250 odd
Sent from my LG-SU760 using xda app-developers app
saint_cow said:
So this is just without the visual mods?
Sent from my LG-SU760 using xda app-developers app
---------- Post added at 02:58 PM ---------- Previous post was at 02:56 PM ----------
Has anyone had success with setting the cpu minimum below 250? Mine always freezes below 250 and randomly about 1250 odd
Sent from my LG-SU760 using xda app-developers app
Click to expand...
Click to collapse
Look frequencies
ecb41tza said:
Look frequencies
Click to expand...
Click to collapse
I suspect my phone may be somewhat of a softy, she doesn't like the low (or really high) frequency
Sent from my LG-SU760 using xda app-developers app
xafalo said:
DARKROOM INTERNATIONAL V2
We bring the expected and longed International V2. Everything made ??from scratch, base cover Xbsall Ics (XDA), with the kernel itself Team, Team spectacular mod and more nice .............
A slow to see the light, but we believe that a rom has gone very, very good. We hope comments and try how it work.
Hi bros;
Your works are really EXCELLENT!!!
You' all are brilliant!
It's really worth waiting for.
Keep it up!
Thanks!
Khafly
Click to expand...
Click to collapse
arany0218 said:
I put it on my phone in TWRP recovery, and now it just restarts.
But before it was: WIPE ------ WIPE CACHE ------FACTORY RESET------SYSTEM
After install and i push reboot system button.
Now there is only the LG logo, vibrates and power off. :crying:
become unusable?
Before V1 on the phone was when it happened.
(I'm sorry, I'm Hungarian, and my English is bad) - Google Translate
Click to expand...
Click to collapse
Hi I had the same problem with acura's rom. For me it was the kernel cause when im using theirs my phone shuts off or stuck at the boot logo. so I put iodak's kernel on it at its working perfect now. btw now I'm using ICS International v1 with this kernel: http://forum.xda-developers.com/showthread.php?t=2019208
Hope it helps!
In Hungarian:
De leirom magyarul is:
Szia nekem is ezt csinalta a telefonom acura ROMjaval.. nekem a kernel nem volt stabil azert indult allandoan ujra vagy csak az lg logonal maradt.. utana felraktam ezt: http://forum.xda-developers.com/showthread.php?t=2019208 a kernelt es mukodott. remelem ezzel a ROMmal is mukodik! ha van meg kerdesed megprobalok segiteni.
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
(Regular bootlogo in v1.1, at boot the red tint is actually green..)
Finding the right balance between a good battery life and smooth performance is the key for this version, The battery life and performance are both tweaked by my modded stock rom, broodKernel v1.2 (the one with regular bootlogo)
Changelog for v1.2:
- Added patches from v1.1.1
- Fixed FM Radio problem (thnx to jarjar09!)
- Changed min freq to 245MHz for higher overall stability
- Updated bootanimation
- Added broodrom_scripts dir inside /system/etc (run with script manager (su) or su -c "sh /system/etc/broodrom_scripts/...")
-- activate_i8150_gpu (change to i8150 gpu drivers)
-- activate_i9001_gpu (change to i9001 gpu drivers)
-- auto_calibrate_battery (calibrates battery when 100%)
-- clear_ram_cache (clears ram cache)
-- defragment_databases (defrags available databases)
-- factory_reset (wipes /data, /cache)
-- fix_permissions (fixes a lot of permissions)
-- hard_reset (wipes /data, /cache and /sdcard)
-- wipe_dalvik (wipes /data/dalvik-cache)
-- zipalign_apps (zipaligns all apps)
ROM Features:
- Based on XXKQI 2.3.6 (ICS Value Pack)
- XXKPM Modem Included
- broodKernel v1.2
- Custom boot animation of broodROM Business Edition v1.1
- Debloated
- Rooted
- Deodexed
- Zipaligned
- Init.d Scripts: (both are from broodKernel)
-- 00broodkernel
--- Configuration of several things such as readahead
-- 01screenstatescaling
--- Extended Screenstatescaling script / configuration / tweak script
- Extended Power Menu (with screenshot function & quick reboot function)
- 9 Lockscreens
- Extended Status Bar 15 Toggles
- Disabled ScrollingCache (smooth scroll)
- Removed "Battery Charged Notification"
- GPS Patch
- Cyanogenmod APNS List
- No Adds
- Percent Battery (UOT)
- Some stock replacements
- Mail exchange security policy removed
broodKernel v1.2 Features:
- Added Auto Mount
-- All partitions mounted in noatime / RW
-- Cache / Data & Persist mounted with barrier=0 / commit=60
- Added AOSP bootanimation library
- Added init.d Support (runs at the end of the boot process)
- Changed Kernel Security settings
-- ro.secure=0
-- ro.allow.mock.location=0
-- ro.debuggable=1
-- persist.service.adb.enable=1
- Adjusted Low Memory Killer
-- LMK 60MB Based
- Added build.prop Tweaks
-- Smoother GUI Tweak
-- Less Ringtone Delay
-- GPU Rendering
- Added IPv4 Tweaks
-- Changed Buffersizes
-- Tweaks in /sys/proc/net/core
-- Tweaks in /sys/proc/net/ipv4
- Added Touchscreen Tweaks
-- Sensitive touch
- Added Kernel Tweaks
- Added SD-Card Tweaks
- Added VM (writeout) Tweaks
- Added Zipalign
- Added Vacuum (sqlite_optimize)
- Added GT-i8150 GPU Drivers
- Added 00broodkernel in init.d:
-- Set I/O Scheduler
-- Set SDCard Readahead
-- Enable/Disable Error Reporting
-- Enable/Disable sysctl.conf file
- Added 01screenstatescaling in init.d:
-- Set Awake Governor & min/max freq
-- Set Sleep Governor & min/max freq
-- Enable/Disable Governor tweaks
-- Option to use 01screenstatescaling as the only cpu management source (disable init.qcom.post_boot.sh)
- Non Rotational Readahead boost
Installation:
If you have any KQB/KQE/KQI based ROM installed:
1. Put the zip on your sdcard
2. Start in recovery, by holding: Power + Vol up
3. Make a nandroid backup (just in case)
4. Install the zip
5. Now your system will reboot, now run the "busybox free" application
6. Install busybox in /system/xbin and you're ready to go!
If you have an old stock rom installed, or want to install the Toggle 2G version:
1. Put the zip on your sdcard
2. Start in recovery, by holding: Power + Vol up
3. Make a nandroid backup (just in case)
4. Install the zip
5. Now your system will reboot
6. Turn your phone off and reboot in recovery again
7. Mounts & Storage > Wipe /data
8. Now reboot and run the "busybox free" application
9. Install busybox in /system/xbin and you're ready to go!
Download v1.2 Final (Powered by broodKernel v1.2)
http://sourceforge.net/projects/bro...d-broodROM_Business_Edition_v1.2.zip/download
Download v1.2 Final with Toggle 2G Mod
http://sourceforge.net/projects/bro...ition_v1.2.zip-Toggle2G-resigned.zip/download
Download v1.1 Final (Powered by broodKernel v1.2)
http://sourceforge.net/projects/bro...d-broodROM_Business_Edition_v1.1.zip/download
Download v1.1 Final with Toggle 2G Mod
http://sourceforge.net/projects/bro...ition_v1.1.zip-Toggle2G-resigned.zip/download
Download v1.0 Final
http://sourceforge.net/projects/bro...dROM_Business_Edition_v1.0-Final.zip/download
Download v1.0 Final with Toggle 2G Mod
http://sourceforge.net/projects/bro...v1.0-Final.zip-Toggle2G-resigned.zip/download
Download v1.0 Pre-Release
http://sourceforge.net/projects/bro...oodROM_Business_Edition_v1.0_PRE.zip/download
Download BETA v1.0 Pre-Release with Toggle 2G Mod
http://sourceforge.net/projects/bro...v1.0-Final.zip-Toggle2G-resigned.zip/download
Download BETA v0.5
http://sourceforge.net/projects/bro...roodROM_Business_Edition_BETA0.5.zip/download
Download BETA v0.5 with Toggle 2G Mod
http://sourceforge.net/projects/bro...dition_BETA0.5-Toggle2G-resigned.zip/download
Addons:
Patch & Addons for v1.1 (broodROM Business Edition v1.1.1)
http://sourceforge.net/projects/bro...OM_Business_Edition_v1.1_Patches.rar/download
b02 Blue Theme for Business Edition By b02
http://www.mediafire.com/?edv5lo4n5d1oem7
ICS Theme with 14 Toggle Ext Stat bar/Ext Power Menu and Real ICS Like Statusbar
http://sourceforge.net/projects/bro.../Signed-ICS-Theme_broodROM_BE_v1.zip/download
KPL Modem
http://sourceforge.net/projects/broodrombusines/files/Addons/baseband_xxkpl.zip/download
KPM Modem
http://sourceforge.net/projects/broodrombusines/files/Addons/KPM_Modem.rar/download
Download GPS Configuration Tool
http://www.mediafire.com/?dbut2ktk395fa7t
Quickreboot fix (for powermenu)
http://sourceforge.net/projects/broodrombusines/files/Addons/quickrebootfix.rar/download
Arabic Patch
http://www.mediafire.com/?7ex18co9p3ctds1
I'm sure this question is asked quite a lot but do I need to change the baseband for a proper installation? Right now I have xxxxBUK2 if I'm not mistaken...
Thanks in advance
EDIT: and what about wake up lag? because I'm getting annoyed that in stock rom it takes 2-3 seconds just to turn the screen on
pedrsantiago said:
I'm sure this question is asked quite a lot but do I need to change the baseband for a proper installation? Right now I have xxxxBUK2 if I'm not mistaken...
Thanks in advance
EDIT: and what about wake up lag? because I'm getting annoyed that in stock rom it takes 2-3 seconds just to turn the screen on
Click to expand...
Click to collapse
There is no need to change baseband. But if it matters ill post the modem file.
And the wakup lag is definitely better I must say from 2-3 sec to 1 sec
nice to see this kind of rom. simple, clean, and almost stock
btw: the antutu score isn't useable, because sd card speed bug
i think this rom will find many users.
good luck.
texten said:
nice to see this kind of rom. simple, clean, and almost stock
btw: the antutu score isn't useable, because sd card speed bug
i think this rom will find many users.
good luck.
Click to expand...
Click to collapse
Thanks I really want to make a business environment ready rom
and about the sdcard speed, it doesn't really matter in score acutally, here is another screenshot:
Why battery charged notification is removed? It was convenient ant bug less to me. Im using CM9, but soon im going to need fully working car charger, that's why im interested.
What i really would like to see:
normal sms box in polish language no like in attached thumbnail;
stock touchwiz 3.0 weather widget (that is pack if i remember correctly)
stock touchwiz 3.0 is probably better
1% battery mod = superb!
It's my dream Sammy bug less rom
One more thing that i remember stock Samsung Mail have some kind of bug notification disappears after some time only badge notification informs me about new mail. Is it possible to fix this issue?
sorry if my proposition's going too far in Your vision of this project
broodplank1337 said:
Thanks I really want to make a business environment ready rom
and about the sdcard speed, it doesn't really matter in score acutally, here is another screenshot:
Click to expand...
Click to collapse
looks better
good job.
BzArEx said:
Why battery charged notification is removed? It was convenient ant bug less to me. Im using CM9, but soon im going to need fully working car charger, that's why im interested.
What i really would like to see:
normal sms box in polish language no like in attached thumbnail;
stock touchwiz 3.0 weather widget (that is pack if i remember correctly)
stock touchwiz 3.0 is probably better
1% battery mod = superb!
It's my dream Sammy bug less rom
One more thing that i remember stock Samsung Mail have some kind of bug notification disappears after some time only badge notification informs me about new mail. Is it possible to fix this issue?
sorry if my proposition's going too far in Your vision of this project
Click to expand...
Click to collapse
In the final version Ill include both SystemUI.apk, the one with charged notification and the one without charged notification.
And I still have to take a look at the stock apps, there will be some usefull apps added and some lame apps removed, also will take a look at the mail app
Thanks for sharing your desires
texten said:
looks better
good job.
Click to expand...
Click to collapse
Thanks
Added Toggle 2G version
themes ?
Hi broodplank,
nice work and i think i will give it a try as soon as i find the time. Just a question: will you integrate ics theme and crt off effect or will it stay on the actual design ? By the way some screenshots would be fine
Thx for your efforts
Rhonin
Rhonin86 said:
Hi broodplank,
nice work and i think i will give it a try as soon as i find the time. Just a question: will you integrate ics theme and crt off effect or will it stay on the actual design ? By the way some screenshots would be fine
Thx for your efforts
Rhonin
Click to expand...
Click to collapse
I will not integrate ics theme. want to keep it as stock as possible. but I will add the CRT-off animation. thanks for reminding me
What is the difference between this and RC5? plus could I use the GPS tool for RC5?
Nice work brood.. i find it a little slow when i press the home button on standby mode, i mean, the screen is slow to wake up..i hope u can understand my bad english..
cheers!
yeah.. finally!!! gotta find the time to test this!
always excellent job brood, as usual
Thank you For your Work.
When i have a call, i can see 2 seconds later who is calling. Phone ringing, Black screen for 2 seconds after phone awake.
Joy` said:
Black screen for 2 seconds after phone awake.
Click to expand...
Click to collapse
+1
which kernel is running this business edition ?
Brood,
gps is a very important feature for business
could tweak it as well as last rc5 which was very good ?
regards
eric
Another piece of art from broodplank .Nice ROM.
Keep up the good work!
YMYA said:
What is the difference between this and RC5? plus could I use the GPS tool for RC5?
Click to expand...
Click to collapse
This rom is specially made for business environments, please read the main post for more info. And yes you can use the tool also for RC5 (in fact, you can you use it for any rom on any device)
iLpirLa said:
yeah.. finally!!! gotta find the time to test this!
always excellent job brood, as usual
Click to expand...
Click to collapse
Please let me know what you think about it when you've tested it, and thanks!
ericcostes said:
Brood,
gps is a very important feature for business
could tweak it as well as last rc5 which was very good ?
regards
eric
Click to expand...
Click to collapse
The GPS Configuration tool I made, makes the best gps.conf's so far (best one that i have tested)
Costinutz32 said:
Another piece of art from broodplank .Nice ROM.
Keep up the good work!
Click to expand...
Click to collapse
Thanks
@people who talk about unlock lag:
The unlock lag is caused by one of these reasons below
- slow sleep cpu speed/governor (check /system/etc/init.d/01cpu)
Standard is powersave / 122MHz
- virtuous oc daemon itself. since it will switch between profiles at every lock/unlock
Im gonna test it without the oc daemon also, and ill see if if causes lag just by being active (no matter whatsettings)
- other i9001 bug
You tell me?
NovAndroid 2.1.5
NEW VERSION MORE SMOOTH!
ROM Specifications:
-Changed status bar icons (ICS su760)
-Changed menu icons (ICS its 760)
-Changed some color tones
Changed appearance-3D converter (look su760)
-Changed aspect of the House (blues)
-Changed aspect Calendar
-Changed aspect Gallery (blues)
-Changed appearance Battery Widget
-Changed widget WIFI appearance
-Changed icons Contacts
-Update busybox
-Update apps system
-Add AcidHazardModules v.1.3 (thanks for The Dark)
-Increase WIFI speed
-Tweak Scrolling
Click to expand...
Click to collapse
Bugs:
-None
Captures:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
For upgrading from UpdateMe Smartphone:
Just do Wipes cache, dalvik / cache.
Instalation:
1. Download the ROM (zip file)
2. Flashing recovery (if you skip this step)
3. Enter Recovery (Vol-+ + bot.Encendido bot.3D, to release the LG logo appear)
4. Backup your current ROM.
5. Wipe data, wipe cache, wipe dalvik-cache
6. Install from sdcard
7. Choose zip from sdcard
8. Waits one minute
9. Reboot and enjoy
I recommend installing the Acura Revovery
To questions because it takes "a lot" launch is normal complentamente first boot. And to those I have not covered, this is a ROM based v21e and you'll have one of the safest Froyo Gingerbread or different, so that changing the baseband teneir (which is the problem of not having coverage).
In my Dropbox will find Gingerbread Roms:
-NovAndroid-v2.1.5CONWIPES:http://www.wuala.com/adri_360/NovAndroid/
-Acura Themes (Temas de Launcher 3D Acura): http://www.wuala.com/adri_360/NovAndroid/Añadidos/
-build (lock LG): http://www.wuala.com/adri_360/NovAndroid/Añadidos/
-Recovery Acura: http://www.wuala.com/adri_360/NovAndroid/Añadidos/
I recommend installing the Acura Revovery
Enjoy it
Changelog:
NovAndroid v2.1:
-Fix framework-res
-Fix Jelly Beam Launcher them
-Fix bluetooth
-Eliminado scripts innecesarios
-Removed unnecessary scripts
-Xloud
-Beats Audio
-Loopy Smoothness Tweak-Enhanced
-Removed some apps System
-Removed a few unnecessary libs
-Added gps.conf
-Added resolv.conf
-Update Me 2.0.1: eis an application whose function through an alert notification that a new update of my ROM, so I can then updated small things without having to make major Roms weighing 300 MB, is decargan at a time cell phone and you can install it from Recovery. Configure it is a very cool program. (thanks to acquariusoft)
-Optimized SystemUI
-Optimized Framework-res
Click to expand...
Click to collapse
-NovAndroid2.1: http://www.wuala.com/adri_360/NovAndroid/
NovAndroid v2.0:
-Like System Environment ICS:
-Framework-res:
-SystemUI
-Posts
-Video player
-New animations (not ICS)
-Settings
-Sounds Google Nexus
-3D Max Launcher
-Added Beam Green Jelly Theme
-Bravia Engine
-New Bootanimation
-New Bootlogo
-Tweaks Scripts:
-Sqlite Optimized
- WIFI
-Sheduler
-Zippalign to top
-Dalvik-Cache moved to the cache partition to save space in data.
-Virtual memoy
-Increase in GPS signal
-Increased the speed of the mobile network
-Increased speed WIFI
-Build.prop Tweaks: performance and fluidity.
-On Original Locker
-Locker-Changed Appearance
-Deleting apps from LG
-Zipaligned
-Deodexed
-Hosts Tweaks
-Overclock Modules (thanks tekahuna)
-Support init.d
-Overclock Script (/ etc/init.d/08Overclock):
-Support Ext4
-SDBoost 1024
-Ultimate MD5-Mod (thanks defcomg)
-Dolphin Default Browser
-Other tweaks
Click to expand...
Click to collapse
NovAndroid-2.0-1218: http://www.wuala.com/adri_360/NovAndroid
ENJOY!
NovKernel v0.2
Its my new version more smooth, battery life, and fixed all problems. Thanks for user
Specifications:
-Improved GPU overclock
-Eleminado bluetooth problem
-Added V / R scheduler
-Added more governors and adjusted
-Removed the frequency 1408, and added the 700
-Removed hotplug default and instead hotplug_boost added and adjusted. (Thanks ibluemind)
-Down system latency
-Start to 1008 MAX 300 MIN
-Minimum speed to 186 MHz
-Lowered the task killer for increased battery life
-New VM Tweaks
-Fixed the bluetooth
Click to expand...
Click to collapse
I do not know if I forget something.
Instalation:
1. Download the kernel and put it in the micoSD
2. Log in Recovery
3. Click on "advanced"
4. Click on "Wipe Dalvik-Cache"
5. Click on "install zip from sdcard"
6. Press "choose zip from sdcard external"
7. Reboot and enjoy.
Should be bootable for all and there elegis more often as suits you (1208, 1308). And you give it to "Set on boot" in the event that you use the SetCPU.
Try the governors and the I/O schedulers, and tell me.
Download:
NovKernel-v0.2: www.wuala.com/adri_360/NovAndroid/
If you don't work bluetooth disable 'Set on boot' on programs that are using.
Report kernel bugs.
ENJOY!
Changelog:
-Support Ext4
Support init.d-Script
-Vm Tweaks
-Task tweaks
-SD-Booster tweaks
-Overclock up to 1408 MHz (upgradable to overclock modules)
-Added 5 new frequencies.
-Undervolting at all frequencies
-Added "sio" scheduler (default scheduler)
-Tweak "CFQ", "deadline", "sio" scheduler
-Added "conservative" and "powersave" governors
-Tweak "hotplug", "ondemand" and "interactive" governors
-Cleaned some code in LG
-Overclock GPU 384MHz
-Dubbed stock-speed read / write file
-ON capacitive buttons when you touch the screen
Click to expand...
Click to collapse
Without(NovKernel-v0.1-CON.zip):
http://www.wuala.com/adri_360/NovAndroid/NovKernel/
With(NovKernelv0.1-SIN.zip):
http://www.wuala.com/adri_360/NovAndroid/NovKernel/
Thank you for your hard work, will try it out
ooooooh another rom to play with lol thanks for this
Hi adri_360
wish there were some screenshots too! not that I am not going to try this ROM!
schubeir
schubeir said:
Hi adri_360
wish there were some screenshots too! not that I am not going to try this ROM!
schubeir
Click to expand...
Click to collapse
Screenshots are clearly in the first post.
TO OP:
You do realize DropBox is the worst place to upload a file?
You should use Mediafire or another place.
Your links have already generated too much traffic and have been disabled. (I'd say 20 downloads max?)
The Dark Lestat said:
Screenshots are clearly in the first post.
TO OP:
You do realize DropBox is the worst place to upload a file?
You should use Mediafire or another place.
Your links have already generated too much traffic and have been disabled. (I'd say 20 downloads max?)
Click to expand...
Click to collapse
Ok, i am going to upload this night
Mix Acura-Samno
Dowloaded and installed.
Works well for the moment.
Good job man :good:
---------- Post added at 07:16 PM ---------- Previous post was at 07:14 PM ----------
If you want, you can use this to upload your files :
http://dl.free.fr/
downloaded. will try soon.
finally a new dev
---------- Post added at 09:42 PM ---------- Previous post was at 09:40 PM ----------
Please upload to google drive. dropbox link is BROKEN
Wow i will try
Sent from my LG-P920 using Tapatalk 2
Uploaded o wuala
schubeir said:
Hi adri_360
wish there were some screenshots too! not that I am not going to try this ROM!
schubeir
Click to expand...
Click to collapse
Hi adri_360
Oh, the screen shots are already there. for some reasons, the screenshots were not visible on my office PC. when i checked at home, i saw the screenshots and the comments too.
sorry for the inconvenience. am downloading right now!
schubeir
Installed, nice and smooth, but seems a bit slow, possible due to just 1008 GHZ. how do i overclock?
schubeir
EDIT: didnt notice the setcpu!!
using this ROM + Kernel, checking the battery life!!
schuibeir
Downloading it now, hoping to try it out before I sleep. The screenshots look great, I hope it runs as good as it looks.
Does someone knows where I can find details about the camera mod included in this ROM ?
For me, this rom works great since yesterday.
yan74s said:
Does someone knows where I can find details about the camera mod included in this ROM ?
For me, this rom works great since yesterday.
Click to expand...
Click to collapse
Camero mod in Theme and apps in this forum
Mix Acura-Samno
Need Social + Widget !!!, RAM Management is excellent (283 Mb free on first boot which I haven't seen on any rom before except for stock), Overclocked (@1.3) version gets 6714 in antutu benchmark. I badly need social widget (None of the Rom out there has it).
How about barttery life? Which kernel in this rom? Stock kernel?
Sent from my LG-P920 using Tapatalk 2
The rom has a stock kernel with ramdisk tweaks and in next post there is novkernel
Hello , installed your rom and kernel but i can seem to unlock my simcard .. also tested with getril but no go ..
halleyrokz said:
Need Social + Widget !!!, RAM Management is excellent (283 Mb free on first boot which I haven't seen on any rom before except for stock), Overclocked (@1.3) version gets 6714 in antutu benchmark. I badly need social widget (None of the Rom out there has it).
Click to expand...
Click to collapse
You are wrong about none of the rom out there having social widget.
"Welcome onboard to the O3D developer boat ROM creator. Good luck."
Sent from my LG-P920 using xda premium
Base: CM10 JellyBean
Kernel: Nibbles v0.1.3
Installer: Aroma
Source Sync & Build Date: 1.05.13
Release Date: 1.05.13
Release Version: v1.6
Packed full of yummy goodness, stability and speed, this ROM is intended to be a daily driver. This is not a test, experiment or buggy piece of nonsense. I started with CM10 Jellybean and added numerous enhancements to improve speed, stability and battery life. Installation is a breeze with Aroma, choose which options and applications you want to have - or run it again to install any apps you may have missed (without having to re-flash the ROM).
Please read the first three posts completely, then read them again before you flash this for the first time. Any notable bugs are located in the post below. If you experience any issues that have not been reported already, please post to the thread. Thanks!
Click to expand...
Click to collapse
Installation Made Easy:Just download the zip and flash it. The Aroma installer will guide you through a multitude of options, including different launchers, application choices and system options. If you prefer a no fuss installation, there's even an option for a pre-configured base installation. Lastly, if you decide to install any apps you previously chose not to, simply flash the zip and choose the application installer option.
Click to expand...
Click to collapse
Included Applications:Google Apps 4.1, ROM Manager, Root File Explorer, Accuweather, DSP Manager with BEATS Audio, Goo.im and more! The ROM also includes the new UCLK4 radio as an optional installation.
Under the hood are numerous script tweaks, system tweaks and enhancements to balance performance, stability and usability.
Click to expand...
Click to collapse
Nibbles Kernel:Up to and including Nibbles v1.4-S, I've been including the TFQ-LZ kernel by thomas.raines. Starting with Nibbles v1.5-S, there is an entirely new kernel dedicated to powering the Nibbles ROM. The Nibbles kernel includes a LOT of new features that cater to all users who want to get the most out of their device. I've included many popular CPU Governors and I/O schedulers to support a wide variety of uses. Additionally, I've made lots of other fundamental changes to the kernel to better balance battery and performance (well beyond what you can do with a handful of scripts) as well as implementing over clocking the CPU to 1.782GHz, Under/Over Volting the CPU at each frequency step and over clocking the GPU.
CPU Governors: intellidemand, pegasusq, gallimaurfy, interactivex, smartassv2, wheatley, interactive, conservative, userspace, ondemand, performance
I/O Schedulers: noop, deadline, cfq, sio, vr, bfq
There are two flavors of the Kernel available now. One with stock GPU clock speeds and the other with a slightly overclocked GPU. Check the download section below.
Click to expand...
Click to collapse
Thanks and credits!
DAGr8
thomas.raines
sk8erwitskil
CyanogenMod TEAM
Team Chopsticks
TEAM ROOK
jee'sgalaxy
BMP7777
m4570d0n
StolenVW
gs2user
ruben00
rkub - super beta tester
rpr69
iBotPeaches
NGen
mohan_kr
amarullz
Probably others that I missed, just PM me!
Special Thanks:
Cold brews in my fridge.
My sincerest thanks to those who have donated:
treadlightly
harry_fine
mcmasterp
Locoman_
yogi-4
Wallcrawler77
My Wife
Your Girlfriend
Red Bull®
Guinness®
Thanks to everyone else for over 6,500 downloads since I started!
Ok, so I think it's important to make sure you guys go hit Thanks! on each of the people noted above next time you see them in a thread.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Disclaimer: This rom will not prevent a zombie apacalypse. It may however, aid you in the event of an apacalypse by providing stability, battery and smooth cellular operation. By flashing this, your phone should still work ... and as an added bonus, it'll likely work better than your stock rom. If your phone bricks, build a house. By flashing this rom, you agree to have your phone powered by beer and tiny nibbles.
Installation Instructions:
Use Sk8rs CWM 6.0.1.5 for best results.
(Get it here)
Do not flash a ROM or Radio with your phone plugged into USB.
Nandroid your current ROM
Flash the zip from recovery
Aroma installer start and guilde you through the process.
Aroma will also take care of wiping data and caches as needed, so you don't have to do this on your own.
Boot it up
Setup your google account if you installed google apps
Let your google apps sync from play store (if applicable)
Allow installed apps to update from play store (if applicable)
Fix permissions
Reboot
Click to expand...
Click to collapse
Aroma Installer Preview Images
***DOWNLOAD NIBBLES v1.6 HERE!***
Download: http://tinyw.in/0pkg
MD5: fc14733485fcaab2bbd6562790c04953
Click to expand...
Click to collapse
Nibbles 1.5-S CAMERA FIX
Only necessary to install if you have experience the "Cannot connect to camera" error with 1.5-S.
Instructions:
Wipe Gallery/Camera Data & Cache
Remove Gallery/Camera via TiBu
Flash the zip
Reboot
Let apps optimize (I wipe dalvik as part of the fix)
Run fix permissions in ROM Manager
Reboot
Download: http://tinyw.in/lpda
MD5: ad676dd03ef411f649e68091bcffe127
Click to expand...
Click to collapse
***DOWNLOAD Nibbles Kernel v0.1.3 HERE!***
Nibbles 1.6 includes stock and Nibbles versions of the kernel as part of the installer. The downloads below are for anyone who wants to use the kernel on any other AOSP JB rom (kernel will not work on TW ROMs).
Both downloads include all of the kernel features mentioned in the OP. The differences between these two is only the GPU speed. You can download and flash either of these at any time without wiping your system. Note that the installation will wipe your cache and dalvik, so after you reboot, let the apps setup and settle for a few minutes.
Stock GPU Speeds (3D @ 266MHz / 2D @ 200MHz): http://tinyw.in/JOmM
MD5: 4dbdfc9322a7f27db97b32a8bb1cc0c4
GPU Clock Moderate (3D @ 300MHz / 2D @ 228MHz): http://tinyw.in/Answ
MD5: 7a4e8793e9ce1838185d3dd4c07c8af6
Nibbles GPU Speeds (3D @ 320MHz / 2D @ 228MHz): http://tinyw.in/ULPG
MD5: 25e2e0a436e402ee305e18e051c21245
Source Code: https://github.com/carvsdriver
Click to expand...
Click to collapse
Nibbles Icons
(Download Removed - Swapping out settings can be done via the Aroma installer)
Click to expand...
Click to collapse
***Instagram Fix***
The instagram fix included in Nibbles 1.6 is from jee'sgalaxy's post HERE. There are five build.prop values that are edited (Nibbles only required two of them). If you do not use instagram, you can reset these values in build.prop to the following:
debug.composition.type=dyn
debug.mdpcomp.maxlayer=3
dev.pm.gpu_samplingrate = 1 (delete this one)
debug.sf.hw = 1 (this stays the same)
debug.egl.hw = 1 (this stays the same)
( disable dithering as noted in the thread wasn't necessary for the fix )
I included this by default in the ROM because I figured most people use instagram. Either way, if you don't use it, just swap these values back if you want to. Changing them back to stock isn't required unless you notice issues with video related to memory collisions.
Make sure you use a build.prop editor to make the changes, backup your original version and reboot when you are done.
Click to expand...
Click to collapse
***Settings Recommendations***
Below are some settings that I use on this ROM for best performance and battery.
CPU Governor: ondemand
Scheduler: CFQ
Settings->Developer Options: On
Settings->Developer Options->Window animation scale: 1x
Settings->Developer Options->Animation duration scale: .5x
Settings->Developer Options->Transition animation scale: .5x
Settings->Developer Options->Force GPU rendering: On
Apex Launcher->Advanced->Keep in memory: On
Settings->Wi-Fi->Advanced->Keep Wi-Fi on during sleep: Always
Settings->Wi-Fi->Advanced->Avoid Poor Connections: On
Settings->Wi-Fi->Advanced->Notify open network: Off
Click to expand...
Click to collapse
Known Bugs:
Bluetooth may crash the first time you open it. Just relaunch and it should be fine. I don't have a means to test bluetooth, if someone wants to offer up a fix, PM me.
Things of note:
Double check your APN settings after flashing to make sure you're on LTE and it's all correct.
First boot will be slow, have patience. It may take a couple minutes. Subsequent reboots should fly.
If you set your CPU to 196MHz, you will notice some lag when waking up the phone. This is particularly true if you have a live wallpaper.
After first boot, hit the volume rocker to wake up the sound. (This should no longer be an issue)
I no longer support the battery mods from my other thread, while they will work on this ROM they might do something funky. Use at your own risk.
Team Rookie Projects:
http://forum.xda-developers.com/showthread.php?t=1798056
Change Log Information:
There are two places where I publish change information. In the post below and in changelog.txt on Goo.im in each ROM directory. Make sure to read the changelog information before you download and install the ROM. In most cases, the minor version updates simple incorporate patches that have been accumulated since the prior release. If you have installed all applicable patches, you likely won't need to download and install the full ROM.
How to read my version numbers:
I keep them pretty simple to be honest, the first number is a major release. This probably won't change until I move to CM10.1 when it is read. The second number is a compiled release, meaning that I recompiled the source to include significant fixes or updates - you will always need to do a full ROM flash when these are released. The third number is a minor release, as noted above it typically only includes accumulated patches since the last compiled or minor release.
Click to expand...
Click to collapse
v1.6 Change Log:
1/5/13: Reverted base to Jellybean CM10 branch
1/5/13: Fixed Instagram photo flickering
1/5/13: Aroma updates
1/5/13: Camera seems to be working fine now.
1/5/13: GPU clocks set to [email protected] [email protected] (stock speeds are optional at time of installation)
v1.5-S Change Log:
12/21: Nibbles kernel added! Will have two options during ROM installation for GPU settings differences
12/21: Toolchain updates
12/21: Minor code updates and fixes
12/21: Removed No-frills CPU control - system CPU settings has been fixed!
12/21: Added IncrediControl app for managing voltages
12/21: Updated installer to allow for clock mod changes as part of app only install
v1.4-S Change Log:
12/13: TFQ Kernel built from latest source (including 12/12 fixes)
12/13: Cherry picked various new commits from git (Cyanogenmod)
12/13: Removed Flash (it's useless anyway)
12/13: Removed Google App Suite 4.2
12/13: Added Google Apps 4.1 (Play, Music, Search, Now)
12/13: Removed 4.2 camera
12/13: Some minor app updates
12/13: Re-adding ROM Manager
12/13: Faster boot time
12/13: UCLK4 radio (optional) from mohan_kr
*This turned into a bigger update than I anticipated, but it sets things up nicely for the new kernel I have in the works.
Complete change history can be found in changelog.txt on Goo.im. I removed the history from this post to clean things up a bit. This post will only have the last two version changes posted.
FIRST!
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Awesome to have all the multiple ROM options to flash lately. Thanks!
I wanna try this so bad! Why wont you download faster!?
Been using your .2 & .3 roms this week and gotta say good work cvd!! Went back to SkyJB to give the new base and update a try cuz I thought it might be a little bit longer for your release but will be giving this a shot tonight or tomorrow depending on how much I drink today...lol It really is great to have all the choices of roms that are working so well...
rkub said:
Been using your .2 & .3 roms this week and gotta say good work cvd!! Went back to SkyJB to give the new base and update a try cuz I thought it might be a little bit longer for your release but will be giving this a shot tonight or tomorrow depending on how much I drink today...lol It really is great to have all the choices of roms that are working so well...
Click to expand...
Click to collapse
Sounds legit. Thanks for helping me test everything out. I've been running this all day, beating up my phone and battery life and performance have been superb on the Wheatley governor. I plugged in twice to do som ADB stuff, so when I restart from a full charge I'll post up some full results with scren shots.
Great work and thanks again, not only for the bootani(still working on a hybrid) but for the tips on the kernel(thanks to m45 too)!
BMP7777 said:
Great work and thanks again, not only for the bootani(still working on a hybrid) but for the tips on the kernel(thanks to m45 too)!
Click to expand...
Click to collapse
If you need help on the ani, shoot me a PM. We're just running around getting ready for the hurricane so I should have some time tonight to fiddle with it if you want. Better hurry though, because we might be dead and flooded by Monday :laugh:
Aw yea!
Sent from my SAMSUNG-SGH-I727 using xda premium
What scheduler do you recommend? I'm gonna use Wheatley as my governor but Idk what scheduler to use
Sent from this guy B)
car vs driver said:
If you need help on the ani, shoot me a PM. We're just running around getting ready for the hurricane so I should have some time tonight to fiddle with it if you want. Better hurry though, because we might be dead and flooded by Monday :laugh:
Click to expand...
Click to collapse
Nice rom good to see your deving now and can't wait for your future work
And about the hurricane i feel so conflicted cus i don't wanna get flooded... but i dont want school :silly:
Screenshots?
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
iNeedICS said:
What scheduler do you recommend? I'm gonna use Wheatley as my governor but Idk what scheduler to use
Sent from this guy B)
Click to expand...
Click to collapse
I'm running cfq schedule, wheatley governor clocked to 1.62GHz. So far so good. I haven't messed with the other schedulers much yet, trying to establish a baseline now that I'm actually done flashing new builds multiple times a day for testing
Decepticaons said:
Screenshots?
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Click to expand...
Click to collapse
Sure, what are you looking for in particular? I added a couple I took earlier today.
Congrats CvD on the release of your ROM. Looking forward to trying it out!!
Sent from my SAMSUNG-SGH-I727 using xda premium
tkjeeper said:
FIRST!
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Click to expand...
Click to collapse
I thanked u just for ur avatar.
Sent from my SGH-I727 using Tapatalk 2
Mmmm I downloaded from both sites and every attempt gets aborted. The download is good. I'm using ROM manager 5.8 something I think
Sent from my SAMSUNG-SGH-I727 using xda premium
I'm trying to flash with twrp and it says failed every time, I downloaded twice and I did check the md5 is it twrp?
Never mind I just tried CWM and it didn't work either
Sent from my iPad ? = overrated leapster
[MOD] PH85 ICS Packs <> OVERCLOCKED 4-KEYS FIX <> TEST KERNEL BETA [13/12/2012]
KERNEL PAGE TRANSFERRED HERE:
http://forum.xda-developers.com/showthread.php?t=2047427
Introduction:
- THE PATCHES HAS TO BE INSTALLED THROUGH CMW OR TWRP AND WORKS ONLY WITH ICS!!
IMPORTANT HINTS
1 - Before to install do a backup and remove the heavier app in /system/app and /system/apps folders not essential like :
- weather widget
- flash player
- various games
- various widgets
You will re-install it after the installation after checking the free space remaining.
2 - NOTICE: Make sure you have min. 60 mb free on System, or 90 mb for the TMProduct1onz bootanimation (it's bigger )
NOTE I'M NOT TALKING OF "GENERIC" SYSTEM SPACE, I'M TALKING OF /system partition,
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
3 - For who has problems on installation, try to re-install busybox
- Install https://play.google.com/store/apps/...t=W251bGwsMSwxLDEsInN0ZXJpY3Nvbi5idXN5Ym94Il0.
- then reinstall the TMP TRWP recovery: http://milaq.exnet.me/downloads/android/p940/P940RecoveryInstaller.apk
Link to original thread: http://forum.xda-developers.com/showthread.php?t=1859662
4 - USE THIS METHOD IF RECOVERY GET NOT MORE STARTING AFTER BUSYBOX INSTALLATION BUT COULD BE A BIT DIFFICULT FOR LESS EXPERIENCED USERS http://forum.xda-developers.com/showthread.php?t=1978543
5 - IF YOU WILL BE NO MORE ABLE TO START RECOVERY YOU MAY NEED TO INSTALL THE ICS ROM AGAIN FROM THE FIRST STEP SO DON'T FLASH THIS FILE IF YOU NEED TO PRESERVE YOUR ACTUAL SYSTEM
KERNELS WITH NATIVE FEATURESPH85 KERNEL LIST
WARNING: Delete overclockscript and initmodules script before to test!
1) 1.2 ghz https://www.dropbox.com/s/45ocpxi90xxdp8b/PH85KERNEL1.2ghz.zip
2) 1.26 ghz https://www.dropbox.com/s/z001mbh3rurm01i/PH85KERNEL1.26.zip
3) 1.3 ghz - Caution! Maybe unstable https://www.dropbox.com/s/74ucoeoc3xdidxz/PH85KERNEL1.3ghz.zip
BEFORE TO INSTALL THE OVERCLOCK PACKS AND THE KERNEL signed x-loader.bin, signed u-boot.bin and signed recovery are required, FOLLOW THIS GUIDE http://forum.xda-developers.com/showthread.php?t=1978543
KERNELS WITH NON-NATIVE FEATURES
New pack 29/11/2012 with 4-keys kernel
The boot.img files are signed to work with wkpark recovery and Acura2201
OVERCLOCK lightly undervolted (settings similar to stock), PACK WITH MODULES, CPU GOVERNOR & I/O SCHEDULERS
Features:
1) Native boot.img init.d support
2) Native adbd insecure support
3) Overclock loaded by boot.img
4 KEYS FIXED , UNDERVOLTED @ 1208 MHZ https://www.dropbox.com/s/wf1l5jml5a2fx8u/4keysfixed1208mhz.zip
@ 1208 MHZ http://www.mediafire.com/?l0qcujdw0hdqc73
@ 1108 MHZ http://www.mediafire.com/?98m4lpnp434tpcg
Stock clock and volts http://www.mediafire.com/?jxspk7yjfgt0zdf
Not suggested for all, try at your own risk:
Extreme tuning undervolt 333-666-1008-1218 http://www.mediafire.com/?1zwvqhqz95jhks6
JUST APPS & MEDIA PACK feat. TMProduct1onZ
1) Holo Locker
2) Nova Launcher
3) ArcCamera, Gallery (with photosphere feature but still upside/down issue) modded by DefComg Video Editor, Photo Editor by Bether and Camera 360 (updated)
4) ClockSync
5) Dolphin Browser v9
6) DSPManager
7) LgContacts3 fixed by iodak
8) 160 chars Message by DefComg (updated)
9) NoFrills Cpu Control: my favourite settings are hotplug as governor and sio as I/O scheduler
10) Total Commander
- Removes korean titled ringtones
- Changes bootanimation
http://www.mediafire.com/?df789do63fc7w9t
CM10 OVERCLOCK
https://www.dropbox.com/s/36i8ohj68d5a7h8/PH85 OVERCLOCK CM10.zip
--------------------------
OLD PACKS
List of features:
APPS:
1) Holo Locker
2) Nova Launcher
3) ArcCamera, Gallery (with photosphere feature but still upside/down issue) modded by DefComg Video Editor, Photo Editor by Bether and Camera 360
4) ClockSync
6) Dolphin Browser v9
7) DSPManager
8) LgContacts3 fixed by iodak
9) 160 chars Message by DefComg
11) NoFrills Cpu Control: my favourite settings are hotplug as governor and sio as I/O scheduler
12) Total Commander
INIT.D SUPPORT: (credits to thebrainkafka )
1) Overclock and iodak's modules insmod: low battery consumption at high frequencies IT MAY NOT WORK FINE WITH YOUR PHONE
Code:
Stock similar settings:
Code:
echo 0 300 925 > /proc/cpu_control/tweak_cpu
echo 1 600 1175 > /proc/cpu_control/tweak_cpu
echo 2 900 1265 > /proc/cpu_control/tweak_cpu
echo 3 1200 1345 > /proc/cpu_control/tweak_cpu
Suggested settings:
Code:
echo 0 300 900 > /proc/cpu_control/tweak_cpu
echo 1 600 1025 > /proc/cpu_control/tweak_cpu
echo 2 900 1125 > /proc/cpu_control/tweak_cpu
echo 3 1200 1245 > /proc/cpu_control/tweak_cpu
MODULES (credits to iodak)
1) Overclock: symsearch.ko cpu_control.ko
2) tun.ko ntfs.ko sio-iosched.ko (sio I/O scheduler)
MEDIA: pack 1 with Bootanimation and sounds from LG PRADA
pack 2 with TMProduct1onZ bootanimation
VARIOUS SYSTEM TWEAKS: BUILD.PROP with tweaked 3G CONNECTION AND DEEP SLEEP MODE
DOWNLOAD LINKS:
JUST OVERCLOCK PATCH!!!
- SAFE CLOCKS AND LOW VOLTAGE SETTINGS INSTALLED BY DEFAULT, YOU CAN EDIT IT EVERYTIME DIRECTLY INTO THE ZIP OR THROUGH ROOT EXPLORER IN /SYSTEM/ECT/INIT.D FOLDER
- SIMPLE V1: http://www.mediafire.com/?l9ks3yrrw4pu8p5
- SIMPLE V1.1 safer settings: http://www.mediafire.com/?5xr4lu3buwl2m8a
I removed the supercharged series because i tested and doesn't work fine!
RELAXED CLOCK PATCH.. FOR MORE LAZY OMAP4430 CPUS
- JUST RELAXED OVERLOCK: http://www.mediafire.com/?fmj9ws76a2saxsm
MEGAPACK V1 FINAL RELAXED CLOCKS
- ONE VERSION WITH LATEST SMALL TMProuduct1onZ bootanimation: http://www.mediafire.com/?pfp2ig7sun9n6wf
MEGAPACK V1 FINAL
- PACK 1 WITH PRADA 3.0 BOOTANIMATION AND SOUNDS http://www.mediafire.com/download.php?zx31ba5uzavx1fg
- PACK 2 WITH TMProduct1onZ Bootanimation! http://www.mediafire.com/?ryaagoa651e26ag
MEGAPACK BETA 3
- PACK 1 WITH PRADA 3.0 BOOTANIMATION AND SOUNDS http://www.mediafire.com/download.php?t288458vyhbd9sp
- PACK 2 WITH TMProduct1onZ Bootanimation! http://www.mediafire.com/?vm9jb5putchh0yo
SMALL MODS PACKAGES OF PH85 MODS SERIES
- JUST ArcCamera, Video Editor & PHOTOSPHERE: http://forum.xda-developers.com/showpost.php?p=33969780&postcount=165
- JUST CONTACTS, PHONE & MSGS: http://forum.xda-developers.com/showpost.php?p=33970232&postcount=41
- ARM OPTIMIZED I/O SCHEDULERS AND ONDEMANDX GOVERNOR: http://www.mediafire.com/?papxoeprk681cce
ALL THE HUGE THANKS AND CREDITS MUST GO TO:
XBSALL
samno
defcomg
iodak
thebrainkafka
bether
wkpark
Chainfire
milaq
TMProduct1onZ
zeppelinrox
Acura2201 & Franlov
.. and all "Androidians" who share freely the fruit of hard work!
DISCLAIMER: I'm not responsible of eventual damages caused by this file, if something goes wrong blame just yourself :| I CAN JUST SAY I TESTED IT ON MY O3D AND WORKS FINE
Sorry for the poor graphics of the thread!
SCREENSHOTS
Nova Launcher:
-
My Best Quadrant Score at 1268 mhz (now i keep at 1200 for low consumption and best stability)
USEFUL LINKS:
IODAK OVERCLOCK MODULES:
http://forum.xda-developers.com/showthread.php?t=1961989
DEFCOMG CAMERA MODS AND OTHER MODS THREAD
http://forum.xda-developers.com/showthread.php?t=1957839
http://forum.xda-developers.com/showthread.php?p=33922652#post33922652
XBSALL ORIGINAL ICS CUSTOM ROM POST:
http://forum.xda-developers.com/showthread.php?t=1963847
TWRP AND CMW TEMP POST BY REZZSHA:
http://forum.xda-developers.com/showthread.php?t=1960120
TMPRODUCT1ONZ THREAD:
http://forum.xda-developers.com/showthread.php?t=1976475
V6 SUPERCHARGER THREAD!! zeppelinrox ROCKS!! and... SERVICE.JAR AUTOPATCHER
http://forum.xda-developers.com/showthread.php?t=991276
http://forum.xda-developers.com/showthread.php?t=1914159
Acura2201 recovery!! http://forum.xda-developers.com/showthread.php?t=2000288
SUGGESTED APPS
- Adbd Insecure (for use with windows root browsers like Android Commander) go to download here http://forum.xda-developers.com/showthread.php?t=1687590 Credits to Chainfire
- Nova Launcher Thread! http://forum.xda-developers.com/showthread.php?t=1389071
CHANGELOG
V1 ALPHA: 9/11/2012 FIRST VERSION
V1 BETA 2: 10/11/2012
- Removed not useful init.d scripts
- Changed permissions to 755 (rwx -rx -rx)
- Added No Frills Cpu Control
- Added Total Commander
- Fixed Updater Script: unmount /system before mount with busybox and set 777 -rw -rw -rw permission before to extract system folder
- Removed Adbd Insecure due to not accorded re-distribution permission
V1 BETA 3 (almost arriving at final version ): 11/11/2012
- DIVIDED PROJECT IN TWO SUB-PARTS: PH85 MEGAPACK AND PH85 JOCLOCK
For MEGAPACK:
- Moved heavier apps from /system/app to /data folder in order to have more system free space
- Edited overclock with safer setting
- updated ArcCamera.apk to 10 Nov from defcomg
For JOVERCLOCK patch:
- Added V6 SUPERCHARGER SCRIPTS, NITRO LAG NULLIFIER, PATCHED SERVICE.JAR and relative tweaked build.prop (with backup copy of non supercharged build.prop)
- REMOVED UNUSEFUL FILES FROM THE ARCHIVE, sorry i forgot to do it before ;P
V1 FINAL 12/11/2012
- ADDED SAFEST OVERCLOCK SETTINGS
- ADDED SELF-REMOVE /SYSTEM/MEDIA/AUDIO SCRIPT BEFORE INSTALLATION
- Lowered min free space system required
UPDATE 13/11/2012
Updated ArcCamera.apk from defcomg in JPHOTOSPHERE PATCH, just install it!!!
UPDATE 14/11/2012
New updated ArcCamera.apk from defcomg!!!
UPDATE 16/11/2012
Uploaded 3 MODULES PACK!
- Arm optimized sio scheduler (some very little performance improving)
- Arm optimized vr scheduler
- OndemandX cpu governor
Compiled from: Dorimanx-SG2-I9100-Kernel-master-jelly-bean git source, thanks and credits to HIM!
UPDATE 20/11/2012
- Introduced edited boot.img contaning features! Thanks to Acura2201 for the idea!!
- Re-organized PACK projects: divided pack in MODULES, MODULES + OVERLOCK, APPS
UPDATE 8/12/2012
- New kernels, features:
1) GPU at 384 mhz (activated at best CPU frequence)
2) Overlock ram started 466 mhz activated in emif.h, but still not in other parts
3) Added Cpu frequency undervolted
4) Disabled smartreflex thanking to samno, it may drain more battery but it's more stable
5) Tweaked VM thanks samno
6) Added native Pegasusq and ondemandx governors
7) Added native Sio and VR ioschedulers
8) lzma compression for low memory consumption
9) ICS stock memory optimization
10) Tweaked touchscreen thanks samno
UPDATE 10/12/2012
CM10 overlock pack in last posts!
UPDATE 13/12/2012
Fixed poweroff recharge bug in PH85 kernels!
TO DO:
- wait your feedbacks
- wait for defcomg news and update the packages
- searching for interesting kernel features to implement
POSITIVE: alphatia post, tavares_one post, speedyranger post,
NEGATIVE: As expected 3 for the beta 2 version, just test the v1 final and follow the suggestions on TOP of first post
Root explorer is paid app you have to remove all paid apps!!!!
Sent from my LG-P920 using xda app-developers app
Link temporary removed
---
REUPLOADING
https://play.google.com/store/apps/details?id=com.ghisler.android.TotalCommander&hl=en use this instead
I've been toying with aroma, maybe i'll try my luck and see if I can cook up a nice little gui to go along with this. Don't hold your breath though. I stopped by to say nice work, those patches are definitely needed. Have you also checked out some of the scripts from v6 supercharger, really helped with my phone and xbsall's rom.
great job! thx
Enviado desde mi LG-P920 usando Tapatalk 2
Weird :/ ive flashed the zip and nothing changed
Im on the XBSA 4.0.4 ROM (first port not the custom one)
Sent from my P920 using ICS 4.0.4 by XBSA
i flashed but nothing changed i just got the nadb insecure why is that? i tried them both through twrp ..
I tested better the init.d scripts and most are totally not useful, i'll remove it in the next version.
Sometimes the flash with TWRP may fail, just repeat the flash after rebooting the recovery or test with CMW (in CMW use the pwr button as OK)
Sent from my LG-SU760 using xda premium
Hey i tried flashing twice from twrp ,,i tried wiping caches. I tried without wiping and flashed from internal and external sd card and still doesnt work hope u can find a solution i will be waiting
Sent from my LG-SU760 using xda app-developers app
OK there must be some issue in updater script, i'll fix it in the day
Just so I understand, this single zip, when working, will fix some ICS stuff and overclock my phone?
I'm all for that, cheers
Sent from my LG-SU760 using xda app-developers app
LeighR said:
Just so I understand, this single zip, when working, will fix some ICS stuff and overclock my phone?
I'm all for that, cheers
Sent from my LG-SU760 using xda app-developers app
Click to expand...
Click to collapse
It contains all the main actual updates and fixes for the XBSA ICS rom... and some other useful app
Thanks your work is appreciated
I will be waiting.
Sent from my LG-SU760 using xda app-developers app
alphatia said:
Thanks your work is appreciated
I will be waiting.
Sent from my LG-SU760 using xda app-developers app
Click to expand...
Click to collapse
Anyway it's weird it doesn't work, i used the updater script of every other update pack.. Try reinstalling busybox
While i upload the corrected version, anyway the pack can be used to extract the system folder and pushed in the system with: "adb push" if you want to use adb or can be pushed with terminal emulator or alternatively with root explorer or equivalent
That's great, thanks
Did anyone figure out how to send a message greater than 160 chars, other than using a different app such as handcent? I changed the message.apk file and it did jump from 80 to 160 chars but still crashed if I went over.
Also, anyone know how to change the battery icon to show a %age? I think UOT Kitchen only works on GB ROMs. Might be nice to add to the patch if anyone knows
Sent from my LG-SU760 using xda app-developers app
Ok something weird happened i hope u could help me i didnt have busybox so i installed busybox pro and after installation i cand boot into twrp recovery any more i also uninstalled busybox still cant boot to recovery and also installed recovery again ,,,still no luck i hope that u can help me plz
Sent from my LG-SU760 using xda app-developers app
alphatia said:
Ok something weird happened i hope u could help me i didnt have busybox so i installed busybox pro and after installation i cand boot into twrp recovery any more i also uninstalled busybox still cant boot to recovery and also installed recovery again ,,,still no luck i hope that u can help me plz
Sent from my LG-SU760 using xda app-developers app
Click to expand...
Click to collapse
After busybox re-install this: http://milaq.exnet.me/downloads/android/p940/P940RecoveryInstaller.apk
Thanks for the quick reply i re installed the recovery but still cant boot to recovery please help me it would be much appreciated
Sent from my LG-SU760 using xda app-developers app
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
New International V3 of Team Darkroom, the wait was worth it. Again, we have done a great job Team, the sensations we have are excellent.
INTERNATIONAL V3 XXL ONLY IF HAVE PARTITIONS BIG EUROPEAN ICS BY XBSALL
Source from Xbsall: http://forum.xda-developers.com/showthread.php?t=1963847
Bin Large Partition from Xbsall: [URL=http://d-h.st/dxl]28brtlarge.rar - 323.46 MB[/URL]
OPTION #2: V28b Prerooted with larger System/Data Partitions
This ROM is going to upgrade you to ICS, NO MATTER if you are on GINGERBREAD, on PORTED ICS or JELLYBEAN.
FLASH THIS ONLY IF YOU DON'T HAVE V28B PREINSTALLED AND ROOTED IN YOUR P920.
DONT FORGET TO KEEP A BACKUP OF YOUR INTERNAL SD AND YOUR DATA AT YOUR PC CAUSE ALL WILL BE ERASED.
If you want more space in SYSTEM and DATA PARTITIONS you can use this 28brtlarge.rar
This process is for advanced users.
Download and extract it..
Take a CWM BACKUP (NOT with 2nd init CWM or TWRP Recovery)
Take a BACKUP of your InternalSD DATA at your PC
Flash the BIN file with LG FLASHTOOL
Reboot
After it gets flashed PRESS VOLUME DOWN and POWER until the factory reset screen appears.
Factory Reset
After ANDROID starts go into your SETTINGS > STORAGE and ERASE INTERNAL MEMORY and restore your Internal SD Data from your PC
REBOOT to CWM RECOVERY
Format SYSTEM
RESTORE YOUR BACKUP
That's it
Click to expand...
Click to collapse
Source in Spanish: http://www.thedarkroomteam.com/index.php?topic=392.0
To install the rom V3 International XXL we must change the recovery:
Bootloader 1.10+TWRP Recovery: VOL + / 3D Button and Power
When you leave the red LG logo, release Power and keep holding down the other two until it TWRP recovery.
Bootloader 1.10+TWRP
or
Bootloader 1.25+TWRP Recovery: VOL - / 3D Button and Power
When you leave the gray LG logo, release Power and keep holding down the other two until it TWRP recovery.
Bootloader 1.25+TWRP
Unzip the file to the desktop, open the folder and run the Unlock.bat
With the phone with the battery removed, put the USB and get a warning when 5 seconds .... put the battery and hopefully cmd screen is solid green. We already have the recovery position.
If bat file don't ends check you have installed
Let Device Manager.
Connect the phone without battery, only the usb and windows began to emit sound on and off, now we have to go to Windows Device Manager, and see how it comes and goes the OMAP4430 or Cosmo.
We must be vigilant and click with right button above, select update driver and select the previous rar, folder (usb_drv_windows) updated once disconnected the phone and go to the folder the bootloader.
Click to expand...
Click to collapse
CHANGELOG
-Base Ics EURO V28B
-System partitions to 1'54gb (Thanks to Xbsall)
-Deoxeada and Zipaling
-kernel Darkroom
-Optimized startup
-Improvements in battery consumption
-Better use of RAM
-New governors Cpu
-Improved Reading Sd
-Improved sensitivity of screen
-Improved data rate, 3G, Wifi
-Battery percentage 1%
-Sounds JB 4.2.2
-Sound notification exclusive Darkroom
-Original Keyboard LG
-Original Keyboard Sony Xperia Z
-Shutdownanimation and Bootanimation Darkroom
-ES Explorer
-Voltage Control
-Tesla Led
-QrDroid
-Quick Boot
-WhatsApp
-Dolphin Browser
-Flash Player
-LgHome Launcher 3.0
-Atom Launcher
-Pie Control
-Wallpapers Darkroom
-The official Team Darkroom Apk
Ramdisk characteristics:
-Added support for init.d
-Adjusted Taskiller
-Removed on interactive startup (Start hotplugx default)
-SWAP to ZRAM changed much faster.
Kernel Characteristics:
-Updated version of the Linux kernel 3.0.21 to 3.0.23.
-Added support for ZRAM.
-Lowering the speed of the GPU for stability.
-Replaced hotplug by hotplugx. (Thanks to imoseyon).
-Improved compression of the kernel.
-Added LiveOC v2. (Thanks to Ezekeel)
-Added ZEN and ROW schedulers. (ROW Snatch default scheduler)
-Underclock GPU for greater stability and less consumption. (157.6 MHz, 307-404MHz 2MHz)
-New set of frequencies.
-UNDERVOLT at some frequencies.
-Changed to "Voltage Control v1". (You will be able to touch the voltage of any of the frequencies, so I can have s as often you want to increase the voltage or down if your phone supports it or for less consumption)
-Improved stability at high frequencies.
-Added Fsync Dynamic.
-Added Sound Control v1. (Thanks to Ezekeel)
-On ARCH Power
-Off Fair Sleepers
-Tweak Ondemand governor.
And other things that I have left out
INSTALLATION
XXL V3 INTERNATIONAL IS ONLY IF WE HAVE to flash and partitions BIG IN EUROPEAN ICS XBSALL
Put the Rom in Phone Memory.
Entered the Recovery.
We WIPE ------ WIPE CACHE ------ FACTORY RESET ------ SYSTEM
Again all three times to make sure there is none of the above.
Install the. Zip
Reboot the phone, and hope has to start.
Once we start to install everything, and we start to configure it to our liking. It is recommended to restart the phone 2 or 3 times to settle everything.
To optimize a little more change these two values:
Settings> Developer Options
Window animation scale "change the value of 1x" to 0.5 x
Animation scale "change the value of 1x" to 0.5
ROM DONWLOAD LINK
SOURCE:www.thedarkroomteam.com
Now I will explain one thing to get the most out of your kernel.
On the route system / etc / init.d 99Dark_Tweaks find a file called.
I explain what it all means what it says.
echo "100"> / sys / class / misc / liveoc / mpu_ocvalue
This line is to change the frequencies (Live OC) is that if you change the value 100 to 110, all frequencies increased to more 10%.
Example:
Value:--------------100--------------110
Frequency:-----200MHz--------220MHz
Value:--------------100--------------110
Frequency:-----400MHz--------440MHz
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
echo "1"> / sys / class / misc / fsynccontrol / fsync_enabled
This line active (1) or off (0) the FSYNC. Off gives better performance in bench but having an error or restart does not save the error logs, enabled otherwise.
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
echo "0"> / sys / class / misc / SoundControl / highperf_enabled
echo "0"> / sys / class / misc / SoundControl / volume_boost
These lines are used to modify the audio quality (highperf_enabled "1" to enable) and the volume of this (volume_boost a value from 0 to 3)
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
echo "200000"> / sys/devices/system/cpu/cpu0/cpufreq/screen_off_max_freq
echo "200000"> / sys/devices/system/cpu/cpu1/cpufreq/screen_off_max_freq
These lines correspond to the frequency when the screen is turned off (both should be equal)
Example:
echo "100000"> / sys/devices/system/cpu/cpu0/cpufreq/screen_off_max_freq
echo "100000"> / sys/devices/system/cpu/cpu1/cpufreq/screen_off_max_freq
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Save and reboot every time you start your phone what you have changed.
And you will have everything fondled leave this kernel.
Enjoy and reportad for improvement.
INFO Our kernel released openly (Developers Only): Kernel Github DarkRoom
Click to expand...
Click to collapse
If you like our work, you can invite a few beers
rom looks great and the list of features is good ill flash and post how the rom feels
Amazing Work from amazing team as always
Looking forward to try it
sent from my lg-p920 powered with xbsall's finest work
Good job guys. :thumbup:
Send from my XBSA ICS V7.2 P920.
Thanks and enjoy.
---------- Post added at 11:25 PM ---------- Previous post was at 10:53 PM ----------
xbsall said:
Good job guys. :thumbup:
Send from my XBSA ICS V7.2 P920.
Click to expand...
Click to collapse
thanks xbsall
Will there be a version of this with out the larger partitions? Thank you devs for all your great work!
Sent from my LG-P920 using xda app-developers app
Might just be me but download says its only 73bytes large
Sent from my LG-P925 using xda premium
the ManaWhoney said:
Might just be me but download says its only 73bytes large
Sent from my LG-P925 using xda premium
Click to expand...
Click to collapse
its a text file
Good job Guys. :good:
Thank you all for your support
xafalo said:
New International V3 of Team Darkroom, the wait was worth it. Again, we have done a great job Team, the sensations we have are excellent.
INTERNATIONAL V3 XXL ONLY IF HAVE PARTITIONS BIG EUROPEAN ICS BY XBSALL
CHANGELOG
-Base Ics EURO V28B
-System partitions to 1'54gb (Thanks to Xbsall)
-Deoxeada and Zipaling
-kernel Darkroom
-Optimized startup
-Improvements in battery consumption
-Better use of RAM
-New governors Cpu
-Improved Reading Sd
-Improved sensitivity of screen
-Improved data rate, 3G, Wifi
-Battery percentage 1%
-Sounds JB 4.2.2
-Sound notification exclusive Darkroom
-Original Keyboard LG
-Original Keyboard Sony Xperia Z
-Shutdownanimation and Bootanimation Darkroom
-ES Explorer
-Voltage Control
-Tesla Led
-QrDroid
-Quick Boot
-WhatsApp
-Dolphin Browser
-Flash Player
-LgHome Launcher 3.0
-Atom Launcher
-Pie Control
-Wallpapers Darkroom
-The official Team Darkroom Apk
Ramdisk characteristics:
-Added support for init.d
-Adjusted Taskiller
-Removed on interactive startup (Start hotplugx default)
-SWAP to ZRAM changed much faster.
Kernel Characteristics:
-Updated version of the Linux kernel 3.0.21 to 3.0.23.
-Added support for ZRAM.
-Lowering the speed of the GPU for stability.
-Replaced hotplug by hotplugx. (Thanks to imoseyon).
-Improved compression of the kernel.
-Added LiveOC v2. (Thanks to Ezekeel)
-Added ZEN and ROW schedulers. (ROW Snatch default scheduler)
-Underclock GPU for greater stability and less consumption. (157.6 MHz, 307-404MHz 2MHz)
-New set of frequencies.
-UNDERVOLT at some frequencies.
-Changed to "Voltage Control v1". (You will be able to touch the voltage of any of the frequencies, so I can have s as often you want to increase the voltage or down if your phone supports it or for less consumption)
-Improved stability at high frequencies.
-Added Fsync Dynamic.
-Added Sound Control v1. (Thanks to Ezekeel)
-On ARCH Power
-Off Fair Sleepers
-Tweak Ondemand governor.
And other things that I have left out
ROM DONWLOAD LINK
SOURCE:www.thedarkroomteam.com
Click to expand...
Click to collapse
>2013
>Uploading to mega.co.nz, not a site where you can download mobile
Please bro, don't.
Sent from my LG-P920 using xda app-developers app
It would be cool but you haven't linked us to the XBSA Partition as I'm beyond lost trying to find with your misleading thread.
I installed once and was confronted with the frightening and unpleasant bricking of my phone, in which I fixed myself with a .bin ROM.
My current status with your work remains specifically undecided as I can't view it unless your willing to help a noob follow through on doing something that is simple in your eyes but not as easy in others.
May I ask, am I supposed to install a certain ROM for XBSA and stack your ROM on top? I'm a bit mischievous on where this is supposed to lead me and would like to understand if you could provide further direction and be a bit more clear on how to install a certain ROM.
Another small piece of feedback in a manner I would try and oppose to as kind as possible.
Why mega.co.nz?
Not everyone has the bandwidth to pull a download from there as it requires some massive speeds.
Still, thanks.
Feedback will be appreciated and if you could kindly provide a link to this "partition" in which I've not yet to find I'd be grateful.
Sorry if I come off as rude, I don't mean to and mean no harm.
Sharings said:
It would be cool but you haven't linked us to the XBSA Partition as I'm beyond lost trying to find with your misleading thread.
I installed once and was confronted with the frightening and unpleasant bricking of my phone, in which I fixed myself with a .bin ROM.
My current status with your work remains specifically undecided as I can't view it unless your willing to help a noob follow through on doing something that is simple in your eyes but not as easy in others.
May I ask, am I supposed to install a certain ROM for XBSA and stack your ROM on top? I'm a bit mischievous on where this is supposed to lead me and would like to understand if you could provide further direction and be a bit more clear on how to install a certain ROM.
Another small piece of feedback in a manner I would try and oppose to as kind as possible.
Why mega.co.nz?
Not everyone has the bandwidth to pull a download from there as it requires some massive speeds.
Still, thanks.
Feedback will be appreciated and if you could kindly provide a link to this "partition" in which I've not yet to find I'd be grateful.
Sorry if I come off as rude, I don't mean to and mean no harm.
Click to expand...
Click to collapse
My friend , you don't rant to the developers , you ask for help. Also acknowledging that they don't have to help you at all , would have spared you from writing that lengthy post.
The work they do is voluntary and nonprofit.
If you can't run it , that's your problem because I'm able to run it with no problems. You can ask for help in the general section , then I'll gladly help you.
China , offered American POWs Cigarettes , Hot meals and a good place to sleep , in hopes of making them talk. Guess what? Most of them did. It wouldn't hurt if you tried that for a change.
Sent from my LG-P920 using xda premium
Sharings said:
It would be cool but you haven't linked us to the XBSA Partition as I'm beyond lost trying to find with your misleading thread.
I installed once and was confronted with the frightening and unpleasant bricking of my phone, in which I fixed myself with a .bin ROM....blah blah blah.
Click to expand...
Click to collapse
You can find the XBSA large bin at the XBSA V7.2 ROM thread.
Your Post is misleading and will probably confuse other users.
The large partition is just a BIN file that you flash the same way you flashed any other STOCK LG BIN ROM because its a STOCK V28B ICS LG BIN with modified LARGER partitions and ROOT.
So you have the same possibilities of bricking your phone that you will have with a normal ICS BIN flashing.
Apart form that P920 is unbrickable unless it has hardware damage.
Nothing to brick and nothing to lose.
p.s xafalo take the link for the large partitions bin modification and instructions from my thread and put it in your thread too if you want too
I can't understnad people about Large version - they don't read carefully,what is the difference..I explane same in Bulgarian forum for Android ))
alphatia said:
Amazing Work from amazing team as always
Looking forward to try it
sent from my lg-p920 powered with xbsall's finest work
Click to expand...
Click to collapse
xbsall said:
Good job guys. :thumbup:
Send from my XBSA ICS V7.2 P920.
Click to expand...
Click to collapse
OptimusRs said:
Good job Guys. :good:
Click to expand...
Click to collapse
Thank you all.
Enviado desde mi Darkroom International V3 XXL usando Tapatalk 2
10x to the TEAM !!!
Super work !
boltthrower56 said:
My friend , you don't rant to the developers , you ask for help. Also acknowledging that they don't have to help you at all , would have spared you from writing that lengthy post.
The work they do is voluntary and nonprofit.
If you can't run it , that's your problem because I'm able to run it with no problems. You can ask for help in the general section , then I'll gladly help you.
China , offered American POWs Cigarettes , Hot meals and a good place to sleep , in hopes of making them talk. Guess what? Most of them did. It wouldn't hurt if you tried that for a change.
Sent from my LG-P920 using xda premium
Click to expand...
Click to collapse
Choose to help, not disrespect.
Sent from my LG-P920 using xda app-developers app
please, respect
thanks