{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
New International V3 of Team Darkroom, the wait was worth it. Again, we have done a great job Team, the sensations we have are excellent.
INTERNATIONAL V3 XXL ONLY IF HAVE PARTITIONS BIG EUROPEAN ICS BY XBSALL
Source from Xbsall: http://forum.xda-developers.com/showthread.php?t=1963847
Bin Large Partition from Xbsall: [URL=http://d-h.st/dxl]28brtlarge.rar - 323.46 MB[/URL]
OPTION #2: V28b Prerooted with larger System/Data Partitions
This ROM is going to upgrade you to ICS, NO MATTER if you are on GINGERBREAD, on PORTED ICS or JELLYBEAN.
FLASH THIS ONLY IF YOU DON'T HAVE V28B PREINSTALLED AND ROOTED IN YOUR P920.
DONT FORGET TO KEEP A BACKUP OF YOUR INTERNAL SD AND YOUR DATA AT YOUR PC CAUSE ALL WILL BE ERASED.
If you want more space in SYSTEM and DATA PARTITIONS you can use this 28brtlarge.rar
This process is for advanced users.
Download and extract it..
Take a CWM BACKUP (NOT with 2nd init CWM or TWRP Recovery)
Take a BACKUP of your InternalSD DATA at your PC
Flash the BIN file with LG FLASHTOOL
Reboot
After it gets flashed PRESS VOLUME DOWN and POWER until the factory reset screen appears.
Factory Reset
After ANDROID starts go into your SETTINGS > STORAGE and ERASE INTERNAL MEMORY and restore your Internal SD Data from your PC
REBOOT to CWM RECOVERY
Format SYSTEM
RESTORE YOUR BACKUP
That's it
Click to expand...
Click to collapse
Source in Spanish: http://www.thedarkroomteam.com/index.php?topic=392.0
To install the rom V3 International XXL we must change the recovery:
Bootloader 1.10+TWRP Recovery: VOL + / 3D Button and Power
When you leave the red LG logo, release Power and keep holding down the other two until it TWRP recovery.
Bootloader 1.10+TWRP
or
Bootloader 1.25+TWRP Recovery: VOL - / 3D Button and Power
When you leave the gray LG logo, release Power and keep holding down the other two until it TWRP recovery.
Bootloader 1.25+TWRP
Unzip the file to the desktop, open the folder and run the Unlock.bat
With the phone with the battery removed, put the USB and get a warning when 5 seconds .... put the battery and hopefully cmd screen is solid green. We already have the recovery position.
If bat file don't ends check you have installed
Let Device Manager.
Connect the phone without battery, only the usb and windows began to emit sound on and off, now we have to go to Windows Device Manager, and see how it comes and goes the OMAP4430 or Cosmo.
We must be vigilant and click with right button above, select update driver and select the previous rar, folder (usb_drv_windows) updated once disconnected the phone and go to the folder the bootloader.
Click to expand...
Click to collapse
CHANGELOG
-Base Ics EURO V28B
-System partitions to 1'54gb (Thanks to Xbsall)
-Deoxeada and Zipaling
-kernel Darkroom
-Optimized startup
-Improvements in battery consumption
-Better use of RAM
-New governors Cpu
-Improved Reading Sd
-Improved sensitivity of screen
-Improved data rate, 3G, Wifi
-Battery percentage 1%
-Sounds JB 4.2.2
-Sound notification exclusive Darkroom
-Original Keyboard LG
-Original Keyboard Sony Xperia Z
-Shutdownanimation and Bootanimation Darkroom
-ES Explorer
-Voltage Control
-Tesla Led
-QrDroid
-Quick Boot
-WhatsApp
-Dolphin Browser
-Flash Player
-LgHome Launcher 3.0
-Atom Launcher
-Pie Control
-Wallpapers Darkroom
-The official Team Darkroom Apk
Ramdisk characteristics:
-Added support for init.d
-Adjusted Taskiller
-Removed on interactive startup (Start hotplugx default)
-SWAP to ZRAM changed much faster.
Kernel Characteristics:
-Updated version of the Linux kernel 3.0.21 to 3.0.23.
-Added support for ZRAM.
-Lowering the speed of the GPU for stability.
-Replaced hotplug by hotplugx. (Thanks to imoseyon).
-Improved compression of the kernel.
-Added LiveOC v2. (Thanks to Ezekeel)
-Added ZEN and ROW schedulers. (ROW Snatch default scheduler)
-Underclock GPU for greater stability and less consumption. (157.6 MHz, 307-404MHz 2MHz)
-New set of frequencies.
-UNDERVOLT at some frequencies.
-Changed to "Voltage Control v1". (You will be able to touch the voltage of any of the frequencies, so I can have s as often you want to increase the voltage or down if your phone supports it or for less consumption)
-Improved stability at high frequencies.
-Added Fsync Dynamic.
-Added Sound Control v1. (Thanks to Ezekeel)
-On ARCH Power
-Off Fair Sleepers
-Tweak Ondemand governor.
And other things that I have left out
INSTALLATION
XXL V3 INTERNATIONAL IS ONLY IF WE HAVE to flash and partitions BIG IN EUROPEAN ICS XBSALL
Put the Rom in Phone Memory.
Entered the Recovery.
We WIPE ------ WIPE CACHE ------ FACTORY RESET ------ SYSTEM
Again all three times to make sure there is none of the above.
Install the. Zip
Reboot the phone, and hope has to start.
Once we start to install everything, and we start to configure it to our liking. It is recommended to restart the phone 2 or 3 times to settle everything.
To optimize a little more change these two values:
Settings> Developer Options
Window animation scale "change the value of 1x" to 0.5 x
Animation scale "change the value of 1x" to 0.5
ROM DONWLOAD LINK
SOURCE:www.thedarkroomteam.com
Now I will explain one thing to get the most out of your kernel.
On the route system / etc / init.d 99Dark_Tweaks find a file called.
I explain what it all means what it says.
echo "100"> / sys / class / misc / liveoc / mpu_ocvalue
This line is to change the frequencies (Live OC) is that if you change the value 100 to 110, all frequencies increased to more 10%.
Example:
Value:--------------100--------------110
Frequency:-----200MHz--------220MHz
Value:--------------100--------------110
Frequency:-----400MHz--------440MHz
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
echo "1"> / sys / class / misc / fsynccontrol / fsync_enabled
This line active (1) or off (0) the FSYNC. Off gives better performance in bench but having an error or restart does not save the error logs, enabled otherwise.
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
echo "0"> / sys / class / misc / SoundControl / highperf_enabled
echo "0"> / sys / class / misc / SoundControl / volume_boost
These lines are used to modify the audio quality (highperf_enabled "1" to enable) and the volume of this (volume_boost a value from 0 to 3)
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
echo "200000"> / sys/devices/system/cpu/cpu0/cpufreq/screen_off_max_freq
echo "200000"> / sys/devices/system/cpu/cpu1/cpufreq/screen_off_max_freq
These lines correspond to the frequency when the screen is turned off (both should be equal)
Example:
echo "100000"> / sys/devices/system/cpu/cpu0/cpufreq/screen_off_max_freq
echo "100000"> / sys/devices/system/cpu/cpu1/cpufreq/screen_off_max_freq
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Save and reboot every time you start your phone what you have changed.
And you will have everything fondled leave this kernel.
Enjoy and reportad for improvement.
INFO Our kernel released openly (Developers Only): Kernel Github DarkRoom
Click to expand...
Click to collapse
If you like our work, you can invite a few beers
rom looks great and the list of features is good ill flash and post how the rom feels
Amazing Work from amazing team as always
Looking forward to try it
sent from my lg-p920 powered with xbsall's finest work
Good job guys. :thumbup:
Send from my XBSA ICS V7.2 P920.
Thanks and enjoy.
---------- Post added at 11:25 PM ---------- Previous post was at 10:53 PM ----------
xbsall said:
Good job guys. :thumbup:
Send from my XBSA ICS V7.2 P920.
Click to expand...
Click to collapse
thanks xbsall
Will there be a version of this with out the larger partitions? Thank you devs for all your great work!
Sent from my LG-P920 using xda app-developers app
Might just be me but download says its only 73bytes large
Sent from my LG-P925 using xda premium
the ManaWhoney said:
Might just be me but download says its only 73bytes large
Sent from my LG-P925 using xda premium
Click to expand...
Click to collapse
its a text file
Good job Guys. :good:
Thank you all for your support
xafalo said:
New International V3 of Team Darkroom, the wait was worth it. Again, we have done a great job Team, the sensations we have are excellent.
INTERNATIONAL V3 XXL ONLY IF HAVE PARTITIONS BIG EUROPEAN ICS BY XBSALL
CHANGELOG
-Base Ics EURO V28B
-System partitions to 1'54gb (Thanks to Xbsall)
-Deoxeada and Zipaling
-kernel Darkroom
-Optimized startup
-Improvements in battery consumption
-Better use of RAM
-New governors Cpu
-Improved Reading Sd
-Improved sensitivity of screen
-Improved data rate, 3G, Wifi
-Battery percentage 1%
-Sounds JB 4.2.2
-Sound notification exclusive Darkroom
-Original Keyboard LG
-Original Keyboard Sony Xperia Z
-Shutdownanimation and Bootanimation Darkroom
-ES Explorer
-Voltage Control
-Tesla Led
-QrDroid
-Quick Boot
-WhatsApp
-Dolphin Browser
-Flash Player
-LgHome Launcher 3.0
-Atom Launcher
-Pie Control
-Wallpapers Darkroom
-The official Team Darkroom Apk
Ramdisk characteristics:
-Added support for init.d
-Adjusted Taskiller
-Removed on interactive startup (Start hotplugx default)
-SWAP to ZRAM changed much faster.
Kernel Characteristics:
-Updated version of the Linux kernel 3.0.21 to 3.0.23.
-Added support for ZRAM.
-Lowering the speed of the GPU for stability.
-Replaced hotplug by hotplugx. (Thanks to imoseyon).
-Improved compression of the kernel.
-Added LiveOC v2. (Thanks to Ezekeel)
-Added ZEN and ROW schedulers. (ROW Snatch default scheduler)
-Underclock GPU for greater stability and less consumption. (157.6 MHz, 307-404MHz 2MHz)
-New set of frequencies.
-UNDERVOLT at some frequencies.
-Changed to "Voltage Control v1". (You will be able to touch the voltage of any of the frequencies, so I can have s as often you want to increase the voltage or down if your phone supports it or for less consumption)
-Improved stability at high frequencies.
-Added Fsync Dynamic.
-Added Sound Control v1. (Thanks to Ezekeel)
-On ARCH Power
-Off Fair Sleepers
-Tweak Ondemand governor.
And other things that I have left out
ROM DONWLOAD LINK
SOURCE:www.thedarkroomteam.com
Click to expand...
Click to collapse
>2013
>Uploading to mega.co.nz, not a site where you can download mobile
Please bro, don't.
Sent from my LG-P920 using xda app-developers app
It would be cool but you haven't linked us to the XBSA Partition as I'm beyond lost trying to find with your misleading thread.
I installed once and was confronted with the frightening and unpleasant bricking of my phone, in which I fixed myself with a .bin ROM.
My current status with your work remains specifically undecided as I can't view it unless your willing to help a noob follow through on doing something that is simple in your eyes but not as easy in others.
May I ask, am I supposed to install a certain ROM for XBSA and stack your ROM on top? I'm a bit mischievous on where this is supposed to lead me and would like to understand if you could provide further direction and be a bit more clear on how to install a certain ROM.
Another small piece of feedback in a manner I would try and oppose to as kind as possible.
Why mega.co.nz?
Not everyone has the bandwidth to pull a download from there as it requires some massive speeds.
Still, thanks.
Feedback will be appreciated and if you could kindly provide a link to this "partition" in which I've not yet to find I'd be grateful.
Sorry if I come off as rude, I don't mean to and mean no harm.
Sharings said:
It would be cool but you haven't linked us to the XBSA Partition as I'm beyond lost trying to find with your misleading thread.
I installed once and was confronted with the frightening and unpleasant bricking of my phone, in which I fixed myself with a .bin ROM.
My current status with your work remains specifically undecided as I can't view it unless your willing to help a noob follow through on doing something that is simple in your eyes but not as easy in others.
May I ask, am I supposed to install a certain ROM for XBSA and stack your ROM on top? I'm a bit mischievous on where this is supposed to lead me and would like to understand if you could provide further direction and be a bit more clear on how to install a certain ROM.
Another small piece of feedback in a manner I would try and oppose to as kind as possible.
Why mega.co.nz?
Not everyone has the bandwidth to pull a download from there as it requires some massive speeds.
Still, thanks.
Feedback will be appreciated and if you could kindly provide a link to this "partition" in which I've not yet to find I'd be grateful.
Sorry if I come off as rude, I don't mean to and mean no harm.
Click to expand...
Click to collapse
My friend , you don't rant to the developers , you ask for help. Also acknowledging that they don't have to help you at all , would have spared you from writing that lengthy post.
The work they do is voluntary and nonprofit.
If you can't run it , that's your problem because I'm able to run it with no problems. You can ask for help in the general section , then I'll gladly help you.
China , offered American POWs Cigarettes , Hot meals and a good place to sleep , in hopes of making them talk. Guess what? Most of them did. It wouldn't hurt if you tried that for a change.
Sent from my LG-P920 using xda premium
Sharings said:
It would be cool but you haven't linked us to the XBSA Partition as I'm beyond lost trying to find with your misleading thread.
I installed once and was confronted with the frightening and unpleasant bricking of my phone, in which I fixed myself with a .bin ROM....blah blah blah.
Click to expand...
Click to collapse
You can find the XBSA large bin at the XBSA V7.2 ROM thread.
Your Post is misleading and will probably confuse other users.
The large partition is just a BIN file that you flash the same way you flashed any other STOCK LG BIN ROM because its a STOCK V28B ICS LG BIN with modified LARGER partitions and ROOT.
So you have the same possibilities of bricking your phone that you will have with a normal ICS BIN flashing.
Apart form that P920 is unbrickable unless it has hardware damage.
Nothing to brick and nothing to lose.
p.s xafalo take the link for the large partitions bin modification and instructions from my thread and put it in your thread too if you want too
I can't understnad people about Large version - they don't read carefully,what is the difference..I explane same in Bulgarian forum for Android ))
alphatia said:
Amazing Work from amazing team as always
Looking forward to try it
sent from my lg-p920 powered with xbsall's finest work
Click to expand...
Click to collapse
xbsall said:
Good job guys. :thumbup:
Send from my XBSA ICS V7.2 P920.
Click to expand...
Click to collapse
OptimusRs said:
Good job Guys. :good:
Click to expand...
Click to collapse
Thank you all.
Enviado desde mi Darkroom International V3 XXL usando Tapatalk 2
10x to the TEAM !!!
Super work !
boltthrower56 said:
My friend , you don't rant to the developers , you ask for help. Also acknowledging that they don't have to help you at all , would have spared you from writing that lengthy post.
The work they do is voluntary and nonprofit.
If you can't run it , that's your problem because I'm able to run it with no problems. You can ask for help in the general section , then I'll gladly help you.
China , offered American POWs Cigarettes , Hot meals and a good place to sleep , in hopes of making them talk. Guess what? Most of them did. It wouldn't hurt if you tried that for a change.
Sent from my LG-P920 using xda premium
Click to expand...
Click to collapse
Choose to help, not disrespect.
Sent from my LG-P920 using xda app-developers app
please, respect
thanks
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
(Regular bootlogo in v1.1, at boot the red tint is actually green..)
Finding the right balance between a good battery life and smooth performance is the key for this version, The battery life and performance are both tweaked by my modded stock rom, broodKernel v1.2 (the one with regular bootlogo)
Changelog for v1.2:
- Added patches from v1.1.1
- Fixed FM Radio problem (thnx to jarjar09!)
- Changed min freq to 245MHz for higher overall stability
- Updated bootanimation
- Added broodrom_scripts dir inside /system/etc (run with script manager (su) or su -c "sh /system/etc/broodrom_scripts/...")
-- activate_i8150_gpu (change to i8150 gpu drivers)
-- activate_i9001_gpu (change to i9001 gpu drivers)
-- auto_calibrate_battery (calibrates battery when 100%)
-- clear_ram_cache (clears ram cache)
-- defragment_databases (defrags available databases)
-- factory_reset (wipes /data, /cache)
-- fix_permissions (fixes a lot of permissions)
-- hard_reset (wipes /data, /cache and /sdcard)
-- wipe_dalvik (wipes /data/dalvik-cache)
-- zipalign_apps (zipaligns all apps)
ROM Features:
- Based on XXKQI 2.3.6 (ICS Value Pack)
- XXKPM Modem Included
- broodKernel v1.2
- Custom boot animation of broodROM Business Edition v1.1
- Debloated
- Rooted
- Deodexed
- Zipaligned
- Init.d Scripts: (both are from broodKernel)
-- 00broodkernel
--- Configuration of several things such as readahead
-- 01screenstatescaling
--- Extended Screenstatescaling script / configuration / tweak script
- Extended Power Menu (with screenshot function & quick reboot function)
- 9 Lockscreens
- Extended Status Bar 15 Toggles
- Disabled ScrollingCache (smooth scroll)
- Removed "Battery Charged Notification"
- GPS Patch
- Cyanogenmod APNS List
- No Adds
- Percent Battery (UOT)
- Some stock replacements
- Mail exchange security policy removed
broodKernel v1.2 Features:
- Added Auto Mount
-- All partitions mounted in noatime / RW
-- Cache / Data & Persist mounted with barrier=0 / commit=60
- Added AOSP bootanimation library
- Added init.d Support (runs at the end of the boot process)
- Changed Kernel Security settings
-- ro.secure=0
-- ro.allow.mock.location=0
-- ro.debuggable=1
-- persist.service.adb.enable=1
- Adjusted Low Memory Killer
-- LMK 60MB Based
- Added build.prop Tweaks
-- Smoother GUI Tweak
-- Less Ringtone Delay
-- GPU Rendering
- Added IPv4 Tweaks
-- Changed Buffersizes
-- Tweaks in /sys/proc/net/core
-- Tweaks in /sys/proc/net/ipv4
- Added Touchscreen Tweaks
-- Sensitive touch
- Added Kernel Tweaks
- Added SD-Card Tweaks
- Added VM (writeout) Tweaks
- Added Zipalign
- Added Vacuum (sqlite_optimize)
- Added GT-i8150 GPU Drivers
- Added 00broodkernel in init.d:
-- Set I/O Scheduler
-- Set SDCard Readahead
-- Enable/Disable Error Reporting
-- Enable/Disable sysctl.conf file
- Added 01screenstatescaling in init.d:
-- Set Awake Governor & min/max freq
-- Set Sleep Governor & min/max freq
-- Enable/Disable Governor tweaks
-- Option to use 01screenstatescaling as the only cpu management source (disable init.qcom.post_boot.sh)
- Non Rotational Readahead boost
Installation:
If you have any KQB/KQE/KQI based ROM installed:
1. Put the zip on your sdcard
2. Start in recovery, by holding: Power + Vol up
3. Make a nandroid backup (just in case)
4. Install the zip
5. Now your system will reboot, now run the "busybox free" application
6. Install busybox in /system/xbin and you're ready to go!
If you have an old stock rom installed, or want to install the Toggle 2G version:
1. Put the zip on your sdcard
2. Start in recovery, by holding: Power + Vol up
3. Make a nandroid backup (just in case)
4. Install the zip
5. Now your system will reboot
6. Turn your phone off and reboot in recovery again
7. Mounts & Storage > Wipe /data
8. Now reboot and run the "busybox free" application
9. Install busybox in /system/xbin and you're ready to go!
Download v1.2 Final (Powered by broodKernel v1.2)
http://sourceforge.net/projects/bro...d-broodROM_Business_Edition_v1.2.zip/download
Download v1.2 Final with Toggle 2G Mod
http://sourceforge.net/projects/bro...ition_v1.2.zip-Toggle2G-resigned.zip/download
Download v1.1 Final (Powered by broodKernel v1.2)
http://sourceforge.net/projects/bro...d-broodROM_Business_Edition_v1.1.zip/download
Download v1.1 Final with Toggle 2G Mod
http://sourceforge.net/projects/bro...ition_v1.1.zip-Toggle2G-resigned.zip/download
Download v1.0 Final
http://sourceforge.net/projects/bro...dROM_Business_Edition_v1.0-Final.zip/download
Download v1.0 Final with Toggle 2G Mod
http://sourceforge.net/projects/bro...v1.0-Final.zip-Toggle2G-resigned.zip/download
Download v1.0 Pre-Release
http://sourceforge.net/projects/bro...oodROM_Business_Edition_v1.0_PRE.zip/download
Download BETA v1.0 Pre-Release with Toggle 2G Mod
http://sourceforge.net/projects/bro...v1.0-Final.zip-Toggle2G-resigned.zip/download
Download BETA v0.5
http://sourceforge.net/projects/bro...roodROM_Business_Edition_BETA0.5.zip/download
Download BETA v0.5 with Toggle 2G Mod
http://sourceforge.net/projects/bro...dition_BETA0.5-Toggle2G-resigned.zip/download
Addons:
Patch & Addons for v1.1 (broodROM Business Edition v1.1.1)
http://sourceforge.net/projects/bro...OM_Business_Edition_v1.1_Patches.rar/download
b02 Blue Theme for Business Edition By b02
http://www.mediafire.com/?edv5lo4n5d1oem7
ICS Theme with 14 Toggle Ext Stat bar/Ext Power Menu and Real ICS Like Statusbar
http://sourceforge.net/projects/bro.../Signed-ICS-Theme_broodROM_BE_v1.zip/download
KPL Modem
http://sourceforge.net/projects/broodrombusines/files/Addons/baseband_xxkpl.zip/download
KPM Modem
http://sourceforge.net/projects/broodrombusines/files/Addons/KPM_Modem.rar/download
Download GPS Configuration Tool
http://www.mediafire.com/?dbut2ktk395fa7t
Quickreboot fix (for powermenu)
http://sourceforge.net/projects/broodrombusines/files/Addons/quickrebootfix.rar/download
Arabic Patch
http://www.mediafire.com/?7ex18co9p3ctds1
I'm sure this question is asked quite a lot but do I need to change the baseband for a proper installation? Right now I have xxxxBUK2 if I'm not mistaken...
Thanks in advance
EDIT: and what about wake up lag? because I'm getting annoyed that in stock rom it takes 2-3 seconds just to turn the screen on
pedrsantiago said:
I'm sure this question is asked quite a lot but do I need to change the baseband for a proper installation? Right now I have xxxxBUK2 if I'm not mistaken...
Thanks in advance
EDIT: and what about wake up lag? because I'm getting annoyed that in stock rom it takes 2-3 seconds just to turn the screen on
Click to expand...
Click to collapse
There is no need to change baseband. But if it matters ill post the modem file.
And the wakup lag is definitely better I must say from 2-3 sec to 1 sec
nice to see this kind of rom. simple, clean, and almost stock
btw: the antutu score isn't useable, because sd card speed bug
i think this rom will find many users.
good luck.
texten said:
nice to see this kind of rom. simple, clean, and almost stock
btw: the antutu score isn't useable, because sd card speed bug
i think this rom will find many users.
good luck.
Click to expand...
Click to collapse
Thanks I really want to make a business environment ready rom
and about the sdcard speed, it doesn't really matter in score acutally, here is another screenshot:
Why battery charged notification is removed? It was convenient ant bug less to me. Im using CM9, but soon im going to need fully working car charger, that's why im interested.
What i really would like to see:
normal sms box in polish language no like in attached thumbnail;
stock touchwiz 3.0 weather widget (that is pack if i remember correctly)
stock touchwiz 3.0 is probably better
1% battery mod = superb!
It's my dream Sammy bug less rom
One more thing that i remember stock Samsung Mail have some kind of bug notification disappears after some time only badge notification informs me about new mail. Is it possible to fix this issue?
sorry if my proposition's going too far in Your vision of this project
broodplank1337 said:
Thanks I really want to make a business environment ready rom
and about the sdcard speed, it doesn't really matter in score acutally, here is another screenshot:
Click to expand...
Click to collapse
looks better
good job.
BzArEx said:
Why battery charged notification is removed? It was convenient ant bug less to me. Im using CM9, but soon im going to need fully working car charger, that's why im interested.
What i really would like to see:
normal sms box in polish language no like in attached thumbnail;
stock touchwiz 3.0 weather widget (that is pack if i remember correctly)
stock touchwiz 3.0 is probably better
1% battery mod = superb!
It's my dream Sammy bug less rom
One more thing that i remember stock Samsung Mail have some kind of bug notification disappears after some time only badge notification informs me about new mail. Is it possible to fix this issue?
sorry if my proposition's going too far in Your vision of this project
Click to expand...
Click to collapse
In the final version Ill include both SystemUI.apk, the one with charged notification and the one without charged notification.
And I still have to take a look at the stock apps, there will be some usefull apps added and some lame apps removed, also will take a look at the mail app
Thanks for sharing your desires
texten said:
looks better
good job.
Click to expand...
Click to collapse
Thanks
Added Toggle 2G version
themes ?
Hi broodplank,
nice work and i think i will give it a try as soon as i find the time. Just a question: will you integrate ics theme and crt off effect or will it stay on the actual design ? By the way some screenshots would be fine
Thx for your efforts
Rhonin
Rhonin86 said:
Hi broodplank,
nice work and i think i will give it a try as soon as i find the time. Just a question: will you integrate ics theme and crt off effect or will it stay on the actual design ? By the way some screenshots would be fine
Thx for your efforts
Rhonin
Click to expand...
Click to collapse
I will not integrate ics theme. want to keep it as stock as possible. but I will add the CRT-off animation. thanks for reminding me
What is the difference between this and RC5? plus could I use the GPS tool for RC5?
Nice work brood.. i find it a little slow when i press the home button on standby mode, i mean, the screen is slow to wake up..i hope u can understand my bad english..
cheers!
yeah.. finally!!! gotta find the time to test this!
always excellent job brood, as usual
Thank you For your Work.
When i have a call, i can see 2 seconds later who is calling. Phone ringing, Black screen for 2 seconds after phone awake.
Joy` said:
Black screen for 2 seconds after phone awake.
Click to expand...
Click to collapse
+1
which kernel is running this business edition ?
Brood,
gps is a very important feature for business
could tweak it as well as last rc5 which was very good ?
regards
eric
Another piece of art from broodplank .Nice ROM.
Keep up the good work!
YMYA said:
What is the difference between this and RC5? plus could I use the GPS tool for RC5?
Click to expand...
Click to collapse
This rom is specially made for business environments, please read the main post for more info. And yes you can use the tool also for RC5 (in fact, you can you use it for any rom on any device)
iLpirLa said:
yeah.. finally!!! gotta find the time to test this!
always excellent job brood, as usual
Click to expand...
Click to collapse
Please let me know what you think about it when you've tested it, and thanks!
ericcostes said:
Brood,
gps is a very important feature for business
could tweak it as well as last rc5 which was very good ?
regards
eric
Click to expand...
Click to collapse
The GPS Configuration tool I made, makes the best gps.conf's so far (best one that i have tested)
Costinutz32 said:
Another piece of art from broodplank .Nice ROM.
Keep up the good work!
Click to expand...
Click to collapse
Thanks
@people who talk about unlock lag:
The unlock lag is caused by one of these reasons below
- slow sleep cpu speed/governor (check /system/etc/init.d/01cpu)
Standard is powersave / 122MHz
- virtuous oc daemon itself. since it will switch between profiles at every lock/unlock
Im gonna test it without the oc daemon also, and ill see if if causes lag just by being active (no matter whatsettings)
- other i9001 bug
You tell me?
NovAndroid 2.1.5
NEW VERSION MORE SMOOTH!
ROM Specifications:
-Changed status bar icons (ICS su760)
-Changed menu icons (ICS its 760)
-Changed some color tones
Changed appearance-3D converter (look su760)
-Changed aspect of the House (blues)
-Changed aspect Calendar
-Changed aspect Gallery (blues)
-Changed appearance Battery Widget
-Changed widget WIFI appearance
-Changed icons Contacts
-Update busybox
-Update apps system
-Add AcidHazardModules v.1.3 (thanks for The Dark)
-Increase WIFI speed
-Tweak Scrolling
Click to expand...
Click to collapse
Bugs:
-None
Captures:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
For upgrading from UpdateMe Smartphone:
Just do Wipes cache, dalvik / cache.
Instalation:
1. Download the ROM (zip file)
2. Flashing recovery (if you skip this step)
3. Enter Recovery (Vol-+ + bot.Encendido bot.3D, to release the LG logo appear)
4. Backup your current ROM.
5. Wipe data, wipe cache, wipe dalvik-cache
6. Install from sdcard
7. Choose zip from sdcard
8. Waits one minute
9. Reboot and enjoy
I recommend installing the Acura Revovery
To questions because it takes "a lot" launch is normal complentamente first boot. And to those I have not covered, this is a ROM based v21e and you'll have one of the safest Froyo Gingerbread or different, so that changing the baseband teneir (which is the problem of not having coverage).
In my Dropbox will find Gingerbread Roms:
-NovAndroid-v2.1.5CONWIPES:http://www.wuala.com/adri_360/NovAndroid/
-Acura Themes (Temas de Launcher 3D Acura): http://www.wuala.com/adri_360/NovAndroid/Añadidos/
-build (lock LG): http://www.wuala.com/adri_360/NovAndroid/Añadidos/
-Recovery Acura: http://www.wuala.com/adri_360/NovAndroid/Añadidos/
I recommend installing the Acura Revovery
Enjoy it
Changelog:
NovAndroid v2.1:
-Fix framework-res
-Fix Jelly Beam Launcher them
-Fix bluetooth
-Eliminado scripts innecesarios
-Removed unnecessary scripts
-Xloud
-Beats Audio
-Loopy Smoothness Tweak-Enhanced
-Removed some apps System
-Removed a few unnecessary libs
-Added gps.conf
-Added resolv.conf
-Update Me 2.0.1: eis an application whose function through an alert notification that a new update of my ROM, so I can then updated small things without having to make major Roms weighing 300 MB, is decargan at a time cell phone and you can install it from Recovery. Configure it is a very cool program. (thanks to acquariusoft)
-Optimized SystemUI
-Optimized Framework-res
Click to expand...
Click to collapse
-NovAndroid2.1: http://www.wuala.com/adri_360/NovAndroid/
NovAndroid v2.0:
-Like System Environment ICS:
-Framework-res:
-SystemUI
-Posts
-Video player
-New animations (not ICS)
-Settings
-Sounds Google Nexus
-3D Max Launcher
-Added Beam Green Jelly Theme
-Bravia Engine
-New Bootanimation
-New Bootlogo
-Tweaks Scripts:
-Sqlite Optimized
- WIFI
-Sheduler
-Zippalign to top
-Dalvik-Cache moved to the cache partition to save space in data.
-Virtual memoy
-Increase in GPS signal
-Increased the speed of the mobile network
-Increased speed WIFI
-Build.prop Tweaks: performance and fluidity.
-On Original Locker
-Locker-Changed Appearance
-Deleting apps from LG
-Zipaligned
-Deodexed
-Hosts Tweaks
-Overclock Modules (thanks tekahuna)
-Support init.d
-Overclock Script (/ etc/init.d/08Overclock):
-Support Ext4
-SDBoost 1024
-Ultimate MD5-Mod (thanks defcomg)
-Dolphin Default Browser
-Other tweaks
Click to expand...
Click to collapse
NovAndroid-2.0-1218: http://www.wuala.com/adri_360/NovAndroid
ENJOY!
NovKernel v0.2
Its my new version more smooth, battery life, and fixed all problems. Thanks for user
Specifications:
-Improved GPU overclock
-Eleminado bluetooth problem
-Added V / R scheduler
-Added more governors and adjusted
-Removed the frequency 1408, and added the 700
-Removed hotplug default and instead hotplug_boost added and adjusted. (Thanks ibluemind)
-Down system latency
-Start to 1008 MAX 300 MIN
-Minimum speed to 186 MHz
-Lowered the task killer for increased battery life
-New VM Tweaks
-Fixed the bluetooth
Click to expand...
Click to collapse
I do not know if I forget something.
Instalation:
1. Download the kernel and put it in the micoSD
2. Log in Recovery
3. Click on "advanced"
4. Click on "Wipe Dalvik-Cache"
5. Click on "install zip from sdcard"
6. Press "choose zip from sdcard external"
7. Reboot and enjoy.
Should be bootable for all and there elegis more often as suits you (1208, 1308). And you give it to "Set on boot" in the event that you use the SetCPU.
Try the governors and the I/O schedulers, and tell me.
Download:
NovKernel-v0.2: www.wuala.com/adri_360/NovAndroid/
If you don't work bluetooth disable 'Set on boot' on programs that are using.
Report kernel bugs.
ENJOY!
Changelog:
-Support Ext4
Support init.d-Script
-Vm Tweaks
-Task tweaks
-SD-Booster tweaks
-Overclock up to 1408 MHz (upgradable to overclock modules)
-Added 5 new frequencies.
-Undervolting at all frequencies
-Added "sio" scheduler (default scheduler)
-Tweak "CFQ", "deadline", "sio" scheduler
-Added "conservative" and "powersave" governors
-Tweak "hotplug", "ondemand" and "interactive" governors
-Cleaned some code in LG
-Overclock GPU 384MHz
-Dubbed stock-speed read / write file
-ON capacitive buttons when you touch the screen
Click to expand...
Click to collapse
Without(NovKernel-v0.1-CON.zip):
http://www.wuala.com/adri_360/NovAndroid/NovKernel/
With(NovKernelv0.1-SIN.zip):
http://www.wuala.com/adri_360/NovAndroid/NovKernel/
Thank you for your hard work, will try it out
ooooooh another rom to play with lol thanks for this
Hi adri_360
wish there were some screenshots too! not that I am not going to try this ROM!
schubeir
schubeir said:
Hi adri_360
wish there were some screenshots too! not that I am not going to try this ROM!
schubeir
Click to expand...
Click to collapse
Screenshots are clearly in the first post.
TO OP:
You do realize DropBox is the worst place to upload a file?
You should use Mediafire or another place.
Your links have already generated too much traffic and have been disabled. (I'd say 20 downloads max?)
The Dark Lestat said:
Screenshots are clearly in the first post.
TO OP:
You do realize DropBox is the worst place to upload a file?
You should use Mediafire or another place.
Your links have already generated too much traffic and have been disabled. (I'd say 20 downloads max?)
Click to expand...
Click to collapse
Ok, i am going to upload this night
Mix Acura-Samno
Dowloaded and installed.
Works well for the moment.
Good job man :good:
---------- Post added at 07:16 PM ---------- Previous post was at 07:14 PM ----------
If you want, you can use this to upload your files :
http://dl.free.fr/
downloaded. will try soon.
finally a new dev
---------- Post added at 09:42 PM ---------- Previous post was at 09:40 PM ----------
Please upload to google drive. dropbox link is BROKEN
Wow i will try
Sent from my LG-P920 using Tapatalk 2
Uploaded o wuala
schubeir said:
Hi adri_360
wish there were some screenshots too! not that I am not going to try this ROM!
schubeir
Click to expand...
Click to collapse
Hi adri_360
Oh, the screen shots are already there. for some reasons, the screenshots were not visible on my office PC. when i checked at home, i saw the screenshots and the comments too.
sorry for the inconvenience. am downloading right now!
schubeir
Installed, nice and smooth, but seems a bit slow, possible due to just 1008 GHZ. how do i overclock?
schubeir
EDIT: didnt notice the setcpu!!
using this ROM + Kernel, checking the battery life!!
schuibeir
Downloading it now, hoping to try it out before I sleep. The screenshots look great, I hope it runs as good as it looks.
Does someone knows where I can find details about the camera mod included in this ROM ?
For me, this rom works great since yesterday.
yan74s said:
Does someone knows where I can find details about the camera mod included in this ROM ?
For me, this rom works great since yesterday.
Click to expand...
Click to collapse
Camero mod in Theme and apps in this forum
Mix Acura-Samno
Need Social + Widget !!!, RAM Management is excellent (283 Mb free on first boot which I haven't seen on any rom before except for stock), Overclocked (@1.3) version gets 6714 in antutu benchmark. I badly need social widget (None of the Rom out there has it).
How about barttery life? Which kernel in this rom? Stock kernel?
Sent from my LG-P920 using Tapatalk 2
The rom has a stock kernel with ramdisk tweaks and in next post there is novkernel
Hello , installed your rom and kernel but i can seem to unlock my simcard .. also tested with getril but no go ..
halleyrokz said:
Need Social + Widget !!!, RAM Management is excellent (283 Mb free on first boot which I haven't seen on any rom before except for stock), Overclocked (@1.3) version gets 6714 in antutu benchmark. I badly need social widget (None of the Rom out there has it).
Click to expand...
Click to collapse
You are wrong about none of the rom out there having social widget.
"Welcome onboard to the O3D developer boat ROM creator. Good luck."
Sent from my LG-P920 using xda premium
[KERNEL][ICS][OC/UV-1.42Ghz+][V3.0.0][P920/SU760][10/03/2013] Jeckyll & Hyde Kernel
Hi, so I finally decided to make an ICS kernel. Here it is, I will adding more gradually as & when I get time or be bothered to . This thread is for mainly development and fun, please use this thread > http://forum.xda-developers.com/showthread.php?t=2077103 in General regarding questions further info and stuff to keep as much crap out of here as possible and to keep the thread clean. Please don't post useless/unrelated/not fun posts or ak for ETA's please because I won't respond or may not bother doing the kernel anymore.
Main Feature List
-Based On ICS V30B For SU760
-Linux Kernel Version 3.0.21/Sneaky Weasel
-Over Clocked CPU Upto 1.42Ghz+
-Live OC For CPU (Change Frequencies To The Max For You Device)
-Max OC @ Boot Set To 1.22Ghz
-Modified Frequency Table
-Pre-Under All Volted CPU Steps Plus User Space UV Interface
-GPU Clocked At 384Mhz
-Modified Ram Disk
-Lots Of IO Schedulers (9 In Total, SIO As Default)
-Init.d Script Support & Automated Folder Creation
-4-Key Fix For P920 Version
-Other Small Tweaks
-For More Info See Changelog's & Github Commits
Prequisites & Installation Instructions
Prior to this installation you MUST:
-Be On Ported ICS Or A Derivative Of It From Here > http://forum.xda-developers.com/showthread.php?t=1956347
-Flashed wkparks Modified Bootloaders From Here > http://forum.xda-developers.com/showthread.php?t=1971014
-Flashed Dexter_nlb's Recovery, Either TWRP Or CWM (I Use CWM) From Here > http://forum.xda-developers.com/showthread.php?t=1978543
-Make A Backup Or Have A Backup Kernel That You Know Works On Your SD Prior To Flashing Just In Case.
-Read The Whole Post Carefully, I Will Not Answer Questions Related To The Kernel If The Answer Is Already Here.
Ok next...
-Download & Copy The .ZIP File Into Your SD.
-Restart The Device Into Recovery
-At This Stage You Can Wipe The Cache's If You Want Or Continue To Next Step.
-Then Choose Install Zip from SD Card, Either Internal Or External. Wherever You Saved It.
-Select The .ZIP File & Install It.
-Reboot Your Phone & You Should Be Good To Go.
-Just Give A Few Minutes As First Boot May Take Longer Than Usual.
Bugs?
I don't know yet havn't tested to much but everyone knows that not all silicon is capable of higher clock frequencies you have been warned I take no responsibility if something goes wrong or if something's don't work as expected. I cannot test this on each ROM but im using it with the completely stock port.
To-Do/Dream List
If you would like to see a tweak/mod implemented in my kernel PM me with information about the tweak and also a link to any source code relating to it.
I Hope Or Plan To Be Able To:
-OC More Than Before
-CPU/GPU OC/UV Interface
-Native Dual Boot
-More Feature & More Fixes Than Before
Customisation Screenies
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Credits
Thank you to: xbsall, wkpark, Dexter_nlb, defcomg, Pesach85, iodak, TMProduct1onz, Ezekeel, SonicXML, jdoreclipse, faux123, franciscofranco, imoseyon, my users & followers, the rest of the O3D community and XDA as without you guys I would never of got into or done anything like this. This kernel is made up of lots of patches and stuff some of which does not have a specific source detail and some that other dev's have if you feel i've left someone out PM me and I will sort it out as quickly as possible. If your name does not appear here check out my commits as I may have credited you there.
Code:
[SIZE=4][B][U]Changelogs[/U][/B][/SIZE]
[B][U]V3.0.0 Changelog Changes Up To 10/03/2013[/U][/B]
-Smart Reflex Tweaks
-Entropy Tweaks
-Interactive Governor Updated
-Added Some Optimized And Updated System Operations
-Touchscreen Sensitivity Tweaks
-Decreased WI-Fi Voltage
-Some Other Minor Shizz
-Included SU760 Display Modules For Compatibilty With P920 Roms
[B][U]V2.1.0 Changelog 03/03/2013[/U][/B]
-Added Force Fast Charge By Chad Froebel Ported By iBluemind
-Added FIFO IO Scheduler (NOOP Style IO)
-Removed Some Frequency Slots (Need Your Opinion,Better?)
-Added Optimised CRC32 Algorithm
-Added Dynamic FSYNC by faux123 (Use TricksterMod To Activate)
-Added CPU Topology & Enabled ARCH_POWER
-Enable ARCH_POWER
-Added Module Pack (See 4th Post http://forum.xda-developers.com/showpost.php?p=36148744&postcount=4)
-Added SU760 Version
[B][U]V2.0.0 Changelog 21/01/2013[/U][/B]
-Added Screen Off Max Frequency Functionality
-Ram Disk Tweaks
-Added GPU Step Of 384Mhz Using Same Voltages 307Mhz For Now
-Reverted Back To Gz Compression
-Removed Pointless Governors
-Increased User Hz For Smoothness
-Temporarily Removed KSM & ZRAM From Build
-Ability To Read GPU Frequency
-Removed 1.5Ghz & 1.6Ghz Since Nobody Reported Them Working
-Source Now Linaro Compiler Friendly & Built With Compiler Tweaks
[B][U]V1.2.0 Changelog 08/01/2013[/U][/B]
-BFQv5 IO Scheduler
-Ram Disk Tweaks
-Partial Port Live OC By Ezekeel (Now Change CPU/MPU Frequencies On The Fly)
-Native Init.d & Init.d Folder Support
-Added Fsync Control By Ezekeel
-Partial Port Of Sound Control By Ezekeel (Enabled High Performance Audio/Set As Default)
-Built With KSM (Not Enabled)
-Built With ZRAM (Not Enabled)
-Reverted VM Readaheads (User Changeable In Apps Anyway)
[B][U]V1.1.1 Changelog 02/01/2013[/U][/B]
-Switched Kernel Compression To LZMA
-Ram Disk Tweaks
-Changes to OC System
-Hotplug Should Now Definately Be Default
[B][U]V1.1.0 Changelog 02/01/2013[/U][/B]
-Increased Max OC Of CPU To 1.6 But Only 1.42 Is Working For Me
-Min Clock 307Mhz & Max Clock 1228Mhz Set @ Boot
-Added More CPU Frequency Steps (16 In Total)
-Increased VM Readaheads
-Set Kernel Hz to 512
-IO Tweaks
-Other Small Tweaks
[B][U]V1.0.0 Changelog 02/01/2013[/U][/B]
-Added 1.2Ghz Slot
-Lowered & Increased Some Voltages
-Increased CPU Thermal Throttle From 61 Deg C > 71 Deg C
-Some Other Minor Changes
[B][U]V0.9.0 Changelog 01/01/2013[/U][/B]
-Initial Stock Based Release
Downloads
Kernel Source/Useful Links/Info/Apps/Other
To access some kernel features more easily I recommend you use this free app > http://forum.xda-developers.com/showthread.php?t=1768315
-Kernel Discussion Thread > http://forum.xda-developers.com/showthread.php?t=2077103
-Kernel Source > https://github.com/samno1607/Jekyll-Hyde
-Kernel Modules > See Attachment(Non-Flashable) - blutooth.ko, btwilink.ko, cfg80211.ko, cifs.ko, crc7.ko, hsi_char.ko, lib80211.ko, mac80211.ko, nls_utf8.ko, rfcomm.ko, rpmsg_clien_sample.ko, rpmsg_server_sample.ko, scsi_wait_scan.ko, tun.ko, wl2xx.ko & wl2xx_sdio.ko.
samno said:
Kernel Source/Useful Links/Info/Apps
-Kernel Source > https://github.com/samno1607/Jekyll-Hyde
Click to expand...
Click to collapse
Great work Samno! Well done! :good:
Finally a kernel from samno !!!!
Sent from my LG-P920 (ICS Ported)
Try Use THANKS Button If I Helped
OS_Hacking said:
Finally a kernel from samno !!!!
Sent from my LG-P920 (ICS Ported)
Try Use THANKS Button If I Helped
Click to expand...
Click to collapse
Yup been M.I.A for far too LonG:good:
Any ETA for cm10 compatibily? good job
Sent from my LG-P920 using XDA Premium HD app
No etas
Sent from my LG-P925 using xda premium
---------- Post added at 02:31 AM ---------- Previous post was at 02:28 AM ----------
Please don't post useless/unrelated/not fun posts or ak for ETA's please because I won't respond or may not bother doing the kernel anymore.
Sent from my LG-P925 using xda
wayno140 said:
No etas
Sent from my LG-P925 using xda premium
---------- Post added at 02:31 AM ---------- Previous post was at 02:28 AM ----------
Please don't post useless/unrelated/not fun posts or ak for ETA's please because I won't respond or may not bother doing the kernel anymore.
Sent from my LG-P925 using xda
Click to expand...
Click to collapse
OK understood sorry
Sent from my LG-P920 using XDA Premium HD app
I have followed the steps to install ROM but keep running into the same issue.
When selecting to install from ZIP in CWM I get the following message after the update has started running....
assert failed: getprop("ro.product.device") == "p920"
getprop ("ro.build.product") == "p920")
(Status 7)
Installation aborted.
Any ideas please?
Thanks, Tom
good to see you BACK!!!!! v1.0 boots up fine but no boot with v1.1?? what proc speed is set at boot? maybe too high?
i need kernal 1.4 for rom offsical v20f
samno said:
Kernel Source/Useful Links/Info/Apps
To access some kernel features more easily I recommend you use this free app > http://forum.xda-developers.com/showthread.php?t=1768315
-Kernel Discussion Thread > http://forum.xda-developers.com/showthread.php?t=2077103
-Kernel Source > https://github.com/samno1607/Jekyll-Hyde
Click to expand...
Click to collapse
That app is awesome. All in one! Thanks!
Sent from my LG-P920 using xda app-developers app
tominski said:
I have followed the steps to install ROM but keep running into the same issue.
When selecting to install from ZIP in CWM I get the following message after the update has started running....
assert failed: getprop("ro.product.device") == "p920"
getprop ("ro.build.product") == "p920")
(Status 7)
Installation aborted.
Any ideas please?
Thanks, Tom
Click to expand...
Click to collapse
in the zip file path META-INF\com\google\android\ look for updater-script and delete the assert line and get prop save it put it back in zip and flash again
think build.prop might still be su760
He didn't wanted to ask here.
Sent from my LG-P920 using xda app-developers app
9079 score with cpu 1.4.
But the battery ends in 12 hours without using it.
Howdy...
So how's it going guys, I need some feedback. What changes would you like to see? Please reply in discussion thread > http://forum.xda-developers.com/showthread.php?t=2077103 , I'm hoping to get a release done tommorow if I get time or early next week so the more comments the better
V1.2.0
New update up guys, see OP's for the epic changelog.
samno said:
New update up guys, see OP's for the epic changelog.
Click to expand...
Click to collapse
I confess i "stolen" from your github the LiveOC source code...
Should i risk the jail?
I implemented it in my the CM10 kernel.. which is giving epic headache!
OK jokes apart, could you give me some little hint on how to increase the signal reception?
In CM10 looks so low...
In ICS i have not the problem because i used Acura ramdisk.
Thanks again in advance
DARKROOM INTERNATIONAL V2
We bring the expected and longed International V2. Everything made ??from scratch, base cover Xbsall Ics (XDA), with the kernel itself Team, Team spectacular mod and more nice .............
A slow to see the light, but we believe that a rom has gone very, very good. We hope comments and try how it work.
The rom is with right to work at 100%, and that everyone gets what interests you.
Has many settings, besides enhancing the rom tweaks inall aspects. Reading sd, screen sensitivity, 3G and wifi speed, reduced power, zipaling startup, defragmentation, etc .......
Besides Team own kernel with OC Cpu, Cpu UV, Oc ram, GPU OC, improved ram, init.d habiliado from the kernel, etc ....... and much more.
One novelty is to regulate yourselves the CPU voltage from SetCPU for example, we get 1.5 MHz of the CPU Oc. Here, as we know, each O3D is a world, therefore there will be terminals they will support and others do not.
Being able to regulate the voltage to frequency, we can adjust much consumption and regunlando well, we can get reduced consumption. Below we explain how to adjust this.
The Mod, c'mon, awesome job that gives unbeatable elegance to our gadgets, android envy of the world.
ONLY INSTALL IF YOU HAVE ICS ROM ported from the SU760, BY XBSALL
ONLY INSTALL IF YOU HAVE RECOVERY IN PARTITION
ROM
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CHANGELOG
- Base ICS Korean (Thanks XBsall)
- All translated into more than 30 languages
- Rooted and Deoxed
- Zipaling
- New gobernors
- New ways reading SD
- Kernel Darkroom
- Optimized Ram
- Boot optimized
- Improved SD card reading and much ......
- Tweak screen sensitivity
- Tweak scrolling
- Enhanced data rate 3G, wifi
- Tweak in wifi, less consumption
- Tweak battery consumption
- Boot Defragment
- And more ...... Tweaks
- Visual customization of the rom
- Battery in percent 1%
- Off mode CRT screen off
- Bravia Engine
- Improved sound AC! D Sound
- Camera Original retouched by Defcomg (14Nov.iArccamaraRC2) (Thanks)
- Camera JB 4.1.2
- Official JB Gallery 4.1.2
- Keyboard LG
- JB official Keyboard 4.1.2
- Face Unlock Unlock
- Apk sms
- ES File Explorer
- Busybox
- Led Tesla
- Quick Boot (to go directly to the recovery)
- The Official Team Darkroom Apk
- Team Wallpapers Darkroom
- More than we allow ourselves safe ........
KERNEL
First thank Pesach85 of xda that has taught me to compile a signed boot and solve certain problems with compiling the kernel binary.
It's been a long hard journey, as I lost my ubuntu and data, hence the long delay. Get to the point
Ramdisk Tweaks:
- Taskiller increased for better management of the RAM
- Load modules from ramdisk
Kernel Tweaks:
- Added "Voltage Control v2" (You can play either the voltage frequencies, so you can have as fecuencia you want to increase the voltage or down if your phone supports it. Set entity 750mV to 1500 mV. Advisable not shift from 1400mV. We are not responsible for any damage to your CPU)
- Overclock to 1500MHz!
- Added a lot more often for more battery saving.
75MHz, 150MHz, 250MHz, 350MHz, 450MHz, 600MHz, 858MHz, 10 08MHz, 1108MHz, 1208MHz, 1308MHz, 1350MHz, 1400MHz, 1500 MHz
- UNDERVOLT, enough to start you all.
- Added CPU Topology
- Set hotplug system as governor and adjusted.
- Added VR and SIO schedulers, and tight deadline. SIO as Set system scheduler.
- Added Lazy governor and governor Wheatley
- Used as binary to compile the latest version
- OC GPU to 384 MHz
- Added "Fsync Control"
- Added libraries to increase copying and moving data
- Added drivers for our GPU originals (ported from GN)
- GPU OC to 460Mhz
- Added a new frequency to the GPU. Now: 157.6 Mhz-384Mhz-460Mhz
- Added a new line voltage higher than stock for added stability at very high frequencies.
- Latency of 300 to 30.
Very fast and stable, and RAM management is infallible.
Well let me explain a few things, you can use at voltages as NSTools programs for editing (recommended), Perfomance, Voltage Control, SetCPU, Rom Toolbox ... etc
Finally the last point that I want to explain is the Fsync Control, this means that you can disable that can cause data loss in a crash / freeze and can also lead to problems if two or more processes accessing the same file. Furthermore disable reduces the number of operations by reducing battery consumption and increase system performance.
It can be disabled by creating a script, paste the following into or empty file and place it in / system / etc / init.d / named XXFsync (where XX is any number):
Code:
#!/sytem/bin/sh
echo 0 > /sys/class/misc/fsynccontrol/fsync_enabled
INSTALLATION
ONLY INSTALL IF YOU HAVE RECOVERY IN PARTITION
1. Put the zip in SD
2. Ask for carrying TWRP recovery:
WIPE ------ WIPE CACHE ------FACTORY RESET------SYSTEM
2a. Normal recovery for CWM:
WIPE CACHE------WIPE DAVIL CACHE------WIPE DATA------FORMAT SYSTEM------FORMAT DATA
3. Install zip
4. Reboot
It takes a little to start, patience ................... seems to stay frozen, but do not worry, it's normal, are more than 700mg of rom and takes to boot.
When configuring acabeis the first time around, restarting a few times, so that it works as it should and stabilizes. At first it costs apks open, but now see the difference when you start using it.
Download link: http://d-h.st/LO7
ROM INTERNATIONAL V2 WHITOUT MOD
Download link: http://d-h.st/tCA
If you want to put icons for phone, contacts, sms, mail in chrome as in the images of the launcher, stay above and clicking when you solteis appears a little circle with a brush, push up and you will see a screen with all the icons available. Marcais which querais and ready.
:laugh:Thanks to all who have donated, thank you:good:
Comments and hope you enjoy it.
To thanks cost nothing.
If you like our work, you can invite a few beers
RESERVED
international original kernel v2
Download
http://d-h.st/t2R
Thanks but i have one Question did you guys add ARABIC lang to this ROM
Would you please make a zip for us to flash original theme (setting, battery, call, ..etc) for this Rom. Thanks for your work!
hi, thank you for rom, it is perfect.
but i have only one problem, same of version 1 :
if i try to shutdown phone , it restart.
if i get shutdown and i link the battery charger, the phone turn on
please, if you can, help me
Click to expand...
Click to collapse
What version of u-boot and xloader hace you?
Enviado desde TheDarkRoom
Great work guys! I want flash the kernel ICS V1.0 of iodak, In this Rom can we install other kernel or have the same problem whit v1? Thanks!
Tank you
Sent from my LG-P925 using xda app-developers app
help!
I put it on my phone in TWRP recovery, and now it just restarts.
But before it was: WIPE ------ WIPE CACHE ------FACTORY RESET------SYSTEM
After install and i push reboot system button.
Now there is only the LG logo, vibrates and power off. :crying:
become unusable?
Before V1 on the phone was when it happened.
(I'm sorry, I'm Hungarian, and my English is bad) - Google Translate
shutdown problem solved
Click to expand...
Click to collapse
The problem has been corrected? Now it safe?
Thanks guys, even without overclocking this ROM feels very slick. I have found an issue with taking 3d pictures, the seems the saved pictures format and orientation is stuffed up. Another issue is that MMS will not send for me either with the included application. Would also like to request stock theme as well.
Sent from my LG-SU760 using xda app-developers app
"phone" APN for ATT Thrill
rom installed as advertised and everything works nicely (1408 overclock gave me some reboots so I knocked it back to 1350) The only bit of advice I have for att users is that the "phone" apn that allows up to 14mb speed instead of 7 is not included and needs to added by the user.
Rom Internatonal V2 without mod available in the first post
http://forum.xda-developers.com/showthread.php?p=36962696
The first time I set up and saved WIFI config ,but when I turned on WIFI, WIFI didn't connect. So I had to forget the network and set up it again, then it's worked perfectly.
This Rom's better than V5.2 - XBSALL ?
ecb41tza said:
Rom Internatonal V2 without mod available in the first post
http://forum.xda-developers.com/showthread.php?p=36962696
Click to expand...
Click to collapse
So this is just without the visual mods?
Sent from my LG-SU760 using xda app-developers app
---------- Post added at 02:58 PM ---------- Previous post was at 02:56 PM ----------
Has anyone had success with setting the cpu minimum below 250? Mine always freezes below 250 and randomly about 1250 odd
Sent from my LG-SU760 using xda app-developers app
saint_cow said:
So this is just without the visual mods?
Sent from my LG-SU760 using xda app-developers app
---------- Post added at 02:58 PM ---------- Previous post was at 02:56 PM ----------
Has anyone had success with setting the cpu minimum below 250? Mine always freezes below 250 and randomly about 1250 odd
Sent from my LG-SU760 using xda app-developers app
Click to expand...
Click to collapse
Look frequencies
ecb41tza said:
Look frequencies
Click to expand...
Click to collapse
I suspect my phone may be somewhat of a softy, she doesn't like the low (or really high) frequency
Sent from my LG-SU760 using xda app-developers app
xafalo said:
DARKROOM INTERNATIONAL V2
We bring the expected and longed International V2. Everything made ??from scratch, base cover Xbsall Ics (XDA), with the kernel itself Team, Team spectacular mod and more nice .............
A slow to see the light, but we believe that a rom has gone very, very good. We hope comments and try how it work.
Hi bros;
Your works are really EXCELLENT!!!
You' all are brilliant!
It's really worth waiting for.
Keep it up!
Thanks!
Khafly
Click to expand...
Click to collapse
arany0218 said:
I put it on my phone in TWRP recovery, and now it just restarts.
But before it was: WIPE ------ WIPE CACHE ------FACTORY RESET------SYSTEM
After install and i push reboot system button.
Now there is only the LG logo, vibrates and power off. :crying:
become unusable?
Before V1 on the phone was when it happened.
(I'm sorry, I'm Hungarian, and my English is bad) - Google Translate
Click to expand...
Click to collapse
Hi I had the same problem with acura's rom. For me it was the kernel cause when im using theirs my phone shuts off or stuck at the boot logo. so I put iodak's kernel on it at its working perfect now. btw now I'm using ICS International v1 with this kernel: http://forum.xda-developers.com/showthread.php?t=2019208
Hope it helps!
In Hungarian:
De leirom magyarul is:
Szia nekem is ezt csinalta a telefonom acura ROMjaval.. nekem a kernel nem volt stabil azert indult allandoan ujra vagy csak az lg logonal maradt.. utana felraktam ezt: http://forum.xda-developers.com/showthread.php?t=2019208 a kernelt es mukodott. remelem ezzel a ROMmal is mukodik! ha van meg kerdesed megprobalok segiteni.
heya peeps..! \m/
so after 2 months the m back with a new update.
fast n stable like never before.
list of features is incomplete,plz read the changelog for more features n some troubleshooting steps.
i have been working on this mod from last 8 months, more than 6000 users r using it right now having devices ranging from galaxy y to galaxy gear running 2.3+
and please dont create a replica of thread in other forums,simply make it a share thread n give link to main thread.
mirroring of download links is not allowed.
plz use the uninstaller first before flashing 4.0...even if you are not using 3.1 cz it will remove all the files which might conflict.
and do press that little thanx button cz its a nice gesture n i really appreciate it..
This mod is applicable only for stock and stock based custom roms...
dont try it on cm/aokp.. CM version released..
SUPPORTED DEVICES: ALL ROOTED ANDROID DEVICES RUNNING [GB+]
yeah u heard it right..
all Gingerbread+ devices...
2.3+ support
Dont try it on cm or aokp or aosp
Features
- Greatly increases the score AnTuTu
- Radically improved management of ram(Using Hard Multitasking Tweak)
- Improves a lot the graphics (found a new way to integrate bravia engine parts in mod)
- Scan multimedia time drastically reduced
- Network Improvements
- All SQlite database optimized
- Android performances improved
- Enable hardware features turned off by default for a better experience on entry level devices
- Cleans the system every 24 hours, thecache every week and the Dalvik every month
- Reduces the startup time of Android
- Allows you to play ported games without lags
- Automatically Zipalign on each boot
- NEW BEATS AUDIO V2.0 INCLUDED (i havnt updated that on my old thread of beats audio)
- New Enhanced LOOPY SMOOTHNESS tweak (Much more buttery smooth)
- V6 supercharger parts included
- Launcher loading is much faster than before
- Boot time decreased
Battery
- The battery is calibrated on every boot
- Drastically decreased the drainage of battery
- Check the activities that consume too much battery stop them
- When the phone is charging reduces system services for faster charging
- Improvements in build.prop
- Disable animation of the system when the battery is nearly exhausted
Graphics, Screen, Images & sound
- Enables a non-aggressive dithering to save CPU
- When you lock the device, the engine makes sure that the GPU is turned off
- Enables deep sleepalso in the bugged rom
- Parts of bravia engine
- Parts of CrossBreeder (credits to dev)
- Parts of Adrenaline Engine (credits to dev)
- Generates video entropy (like seeder)
- V6 superchargerparts included
- Beats audio 2.0 added
CPU, Governors, I/O Schedulers
- Slightly improves the scaling of the frequencies (for better results u should try deviant or kuro kernel)
- Lightens the load on the CPU switching the workload to GPU rendering
- Enable the swap partition in Android (experimental)
List is Incomplete.. plz read the changelog for other features.
Directions to flash:
1.-shutdown ur cell.
2.-press and hold volume up button+home+power button.
u ll be on stock recovery now.
3.-flash cwm zip(GO TO CWM NOW)
4.-mount system and data
5.-flash the zip and reboot
ALL IN ALL U JUST HAVE TO FLASH THE ZIP FROM CUSTOM RECOVERY LIKE CWM..
NOTE : FIRST BOOT MIGHT TAKE SOME TIME AND SOME USERS MIGHT GET BOOTED TWICE. SO IT WILL LOOK LIKE A BOOTLOOP BUT IT ISNT.
if ur first boot is taking much longer then just take out the battry and reboot..
Do take a nandroid bakckup..
AND DONT FORGET TO PRESS THAT THANX BUTTON FOR A GUY WHO WORKED HARD.. :angel:
Changelog
<<<<<<<<<<CHANGELOG>>>>>>>>>>
~~~~~VulpiX 2.0 Changelog~~~~~*new battery saving tweaks forked from cyanogenmod..
battery life increased by 35% approx
*new script to integrate the above tweak into system as well as init.d(already there)
*script to prevent filesystem corruption..
*played with wpaconfig files too..
*much smoother than before..
*NEW RAM MANAGER(optimizes ram much better than old hard multi tasking one used in v1.0) also dropes much lower than ever..
(my record- 72mb aftr clearing ram{bloatwares removed})
*JB devices lag fixd..
*new tweak to disable some useless sleepers to make phone much more responsive without affecting battery life
*.db files ant other database files optimization for less consumption..
*removed some junk from beats files..
*removed beats app due to some compatibility issues.(conflicted wid dspmanager)
*Tons of build.prop tweaks and in older version these lines were not getting added in build.prop so fixed.
*BUSYBOX & INIT.D SUPPORTED KERNEL IS REQUIRED FOR 2.0 and above
*SINCE SEEDER IS INTEGRATED IN SYSTEM SO EXTERNAL SEEDER APPLICATION WONT WORK SO A NEW APP FOR SHOWING ENTROPY LEVEL
*If for some reason, your entropy values aren't hovering around 4096 then the app most probably didn't start automatically. You can try and run it manually using:
Code:
su -c /system/etc/CrossBreeder/zzCrossBreeder FORCE
*since direct editing build.prop is not recommended i have moved build.prop tweaks to init.d file which will b executed on every boot in system(using setprop method) :highfive:
*ad blocker updated
* Modulate OS entropy levels for lag reduction. The whole OS reads either /dev/random or /dev/urandom and both need entropy. However this mod uses a completely different, lightweight and efficient random number generator called Havege . This sharply reduces cpu consumption and corresponding battery life loss compared to Seeder. It also does a better job at keeping entropy levels high hence your device is more responsive. It doesn't run in a CPU intensive loop either. The extend queue functionality has also been added to CrossBreeder. See here for another rationale favouring Havege compared to Rngd - ( http://code.google.com/p/csrng/ - Look for the limitations.)
*Much more.. xD cz i dnt remmember much.. srry..
~~~~~VulpiX 3.0 Changelog~~~~~
*highly advanced updater script
*reworked on whole init.d(much simplified and improved)
*new scripts added and did some cleaning
*adblock source file updated
*much stabler than before
*new lageliminator script with deeper integration of lmk values to minimize/reduce lag upto its least value
*seprate gpu rendring for 2D operations
*new improved sleeper script
*battery calibrated automatically when fully charged and rebooted
*improved touch screen senstivity
*new script for checking wifi idle state and system hibernate to save battery
*since some jb device are hard to tweak and to change system core values i have integrated some tweaks in bin files and sysctl file..
*new bin tweaks and systcl tweak
*build.prop tweaks integration fixed
*changed the default permissions and order of all init.d scripts for proper execution
*A NEW APP FOR DEVELOPER TOOLS(mainly for advance users)
{i included that mainly for advance GINGERBREAD user cz some developer options are hidden in GB, unlike JB}
*A NEW FEATURE OF CLEANING INIT.D SCRIPTS BY SIMPLY EXECUTING A FOLLOWING COMMAND IN TERMINAL EMULATOR-
type- "su" (withut quotes) and press enter
then type - "cleaninit" (withut quotes) and press enter
Click to expand...
Click to collapse
it will clean init.d scripts..
(first mod to integrate init.d cleaner within installer, a small uninstaller. lol)
[BUSYBOX IS REQUIRED FOR THIS]
I thought to make it a complete uninstaller but m damn too lazy..
will provide it separately.. :highfive:
*Battery life increased drastically!!!
~~~~~VulpiX 3.1 Changelog~~~~~
*adblock fixed(reversed commit from 2.0)
*new minfree values(now proper supported by high end devices like Galaxy Note 3 etc.)
*some cleaning in init.d scripts
*Development tools app removed from installer.(Buggy app -_- ,made background processes 0 )
*No need to mess with ADBLOCK files or host files..
everything is fixed now.. :highfive:
~~~~~VulpiX v4.0 Beta1(Private build)~~~~~*Build from scratch. (crossbreeder as base,thnx to idcrisis)
*merged commits from 3.1
*reworked on everything, barred some network tweak/lines which might be causing some trouble in connectivity.
*new GPU tuning with 2D rendering..
*A New Hyper Vulpix feature added..!! ( for manual boosting system performance) {special features for those who have a doubt on working of MOD.. }
simply go to terminal n first type-
'su' (without quotes)
then type
'vulpix' (without quotes)
Click to expand...
Click to collapse
and select the desired option..
*boost n cleaninit feature also merged with Hyper Vulpix Feature, just try once.
~~~~~VulpiX v4.0 Beta5(Private Build)~~~~~*permissions changed for compatibility.
*cleaning in updater script.
*integration problem fixed.
*special 2-way hyper blocking feature added.(a special hosts file generated by me to work with crossbreeder's adblock which is not that effective)
~~~~~VulpiX v4.0 RC1 {Hyper Edition}~~~~~*Most stable n best Build Till date..
*Permissions integration fixed for hyper files.
*Revamped updater script.
*improved balancing between CPU n GPU (improved rendering n shifting of load between them).
*hyper blocking feature removed due to some issues.(it was so powerfull that it even blocked some captcha while online transaction,fixed one will be included in new update)
i dont think that just for sake of some small ads you all will risk you online transaction, be it a $1 or $10000 one.
~~~~~VulpiX CM/AOSP Edition ~~~~~*all features are same like stock edition.
If you're experiencing any issues with your tethering, then you can first try and disable the tethering using:
Code:
su -c /system/etc/CrossBreeder/REMOVE_TETHER_BOOST
dont blame me for any problem or mishap.
start a thermoneuclear war, i'll sit back n laugh at you.
use at ur own risk.
if u face any problem just post here in thread not in pm.
*a seprate ram manager config is provided in a seprate zip for those people who thinks there ram consumption is increased by this mod. (intended for low end devices too.)
*Beats app is back.. i havnt included it in the zip cz some users use DSP manager which conflicts with Beats app.
*ViperFx support.
Beats app n that special config is also compatible with cm/aosp edition..
Uninstaller is same n is compatible with both stock n cm version. it wont remove some files cz basically it was for upto 3.1 but left over some files wont affect ur device. (new updated uninstaller will be up soon. )
To Do list for RC2:
1-fix for hyper blocking feature.
2-working on an build.prop tweak injector(will be merged with hyper vulpix)
because execution of those tweaks via setprop method are not that much effective.
3-uninstaller of above build.prop tweak injector.
(2 n 3 are almost completed, expect RC2 soon. )
that's all folks..!!
Credits
Credits
zeppelinrox
ImbaWind
Exit_Only
idcrisis
nicolassp
jeeko
kuro
jersey
charsi babu
and u all people for using it..
if i forget anyones name then just pm me..
i ll include ur name in credits because i made this thread in a bit of hurry..
Download Links + Addons
Download Links:
Uninstaller is same n is compatible with both stock n cm version. it wont remove some files cz basically it was for upto 3.1 but left over some files wont affect ur device. (new updated uninstaller will be up soon. )
Nitzz said:
system core tweaks..
Click to expand...
Click to collapse
can you upload the file to mediafire ? i cant download from dev-host , just u want to upload i will press thanks
Great job
compatibility
You mentioned that it is only for stock and stock based custom roms. So, will it work with other phone than galaxy y?
DvikzzDroid said:
can you upload the file to mediafire ? i cant download from dev-host , just u want to upload i will press thanks
Great job
Click to expand...
Click to collapse
i tried toupload it on mediafire but it failed thrice.. :'/
dont knw y.. :'(
w8 some one will miror it..
rhar**** said:
You mentioned that it is only for stock and stock based custom roms. So, will it work with other phone than galaxy y?
Click to expand...
Click to collapse
ye it will..
but on some high end phones u might get some lag due to different ram config..
am not sure about that...
just try it once..
DvikzzDroid said:
can you upload the file to mediafire ? i cant download from dev-host , just u want to upload i will press thanks
Great job
Click to expand...
Click to collapse
here it is.
http://www.mediafire.com/download/nrlvwmg9m2tawub/signed_VulpiX1.0.zip
Instructions if using link2sd
flash zip As per op instructions
once restarted wait for media scan to finish
open link2sd
recreate mount scrip
Restart
wait for media scan to finish
restart again
everything should work fine then
Nitzz said:
here it is.
http://www.mediafire.com/download/nrlvwmg9m2tawub/signed_VulpiX1.0.zip
Click to expand...
Click to collapse
thanks Bro ! i try on my hyperion
TIA[
Why my Ram Increase ? idoubt will reboot when the ram is over ! iknow its no lag but idoubt , its normal or what ? explain it bro
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
DvikzzDroid said:
thanks Bro ! i try on my hyperion
TIA[
Why my Ram Increase ? idoubt will reboot when the ram is over ! iknow its no lag but idoubt , its normal or what ? explain it bro
Click to expand...
Click to collapse
first of all the ram manager used in this hard multi tasking by slaid..
i dnt knw why u r getting this much ram usage.. try clearing ram n check again.. most probably on first boot u got this much cz it was busy in enabling all featrs xD
PS- OMG!! how the hell i forgot SLAID ..!!! i didnt mentioned his name in credits.. i ll hav to edit the credits post.. xD
Expecting a ripper.... downloading now.
||""Playing Asphalt™ 8 Airborne on my sgy. LoLz.
Joke of the year. Gameloft devs will die if they hear this. ""||
u say it clears system. Does that mean it will wipe init.d ??
Sent from my GT-S5360 using xda app-developers app
Nitzz said:
first of all the ram manager used in this hard multi tasking by slaid..
i dnt knw why u r getting this much ram usage.. try clearing ram n check again.. most probably on first boot u got this much cz it was busy in enabling all featrs xD
PS- OMG!! how the hell i forgot SLAID ..!!! i didnt mentioned his name in credits.. i ll hav to edit the credits post.. xD
Click to expand...
Click to collapse
Well ! I reboot my device but the ram usage still so damn high , but i like is never lag again ! Thanks bro 8)
Sent from my Connection
Visit My blog : Dvikzz.com
REPORT
This is exactly what I wanted for stock rom
Now the stock rom has become the best rom.
The only problem is that after clearing ram. The keyboard is reverted back to stock. The ram consumption is okay and is great for me and yes multitasking has improved no lag. Sound quality increased.
Will upload screens soon
Couldn't upload screens on that post.. sry
Sent from my GT-S5360 using xda app-developers app
c.r.e.e.d said:
u say it clears system. Does that mean it will wipe init.d ??
Sent from my GT-S5360 using xda app-developers app
Click to expand...
Click to collapse
nope..
i mean it cleans the junk..
Nachiket.Namjoshi said:
This is exactly what I wanted for stock rom
Now the stock rom has become the best rom.
The only problem is that after clearing ram. The keyboard is reverted back to stock. The ram consumption is okay and is great for me and yes multitasking has improved no lag. Sound quality increased.
Will upload screens soon
Click to expand...
Click to collapse
nach this prblm is due to that launcher forcing into memory line in build.prop
samsung keyboard has some property that even if u clear ram and force launchr in memry that stock keyboard wont close..
i experiencd this long b4..
there is no solution for that..
bettr use stock keyboard.. xD
PS- my thanx meter still not increased.. -_-
great
it will work on mini rom????