[MOD] PH85 ICS Packs <> OVERCLOCKED 4-KEYS FIX <> TEST KERNEL BETA [13/12/2012]
KERNEL PAGE TRANSFERRED HERE:
http://forum.xda-developers.com/showthread.php?t=2047427
Introduction:
- THE PATCHES HAS TO BE INSTALLED THROUGH CMW OR TWRP AND WORKS ONLY WITH ICS!!
IMPORTANT HINTS
1 - Before to install do a backup and remove the heavier app in /system/app and /system/apps folders not essential like :
- weather widget
- flash player
- various games
- various widgets
You will re-install it after the installation after checking the free space remaining.
2 - NOTICE: Make sure you have min. 60 mb free on System, or 90 mb for the TMProduct1onz bootanimation (it's bigger )
NOTE I'M NOT TALKING OF "GENERIC" SYSTEM SPACE, I'M TALKING OF /system partition,
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
3 - For who has problems on installation, try to re-install busybox
- Install https://play.google.com/store/apps/...t=W251bGwsMSwxLDEsInN0ZXJpY3Nvbi5idXN5Ym94Il0.
- then reinstall the TMP TRWP recovery: http://milaq.exnet.me/downloads/android/p940/P940RecoveryInstaller.apk
Link to original thread: http://forum.xda-developers.com/showthread.php?t=1859662
4 - USE THIS METHOD IF RECOVERY GET NOT MORE STARTING AFTER BUSYBOX INSTALLATION BUT COULD BE A BIT DIFFICULT FOR LESS EXPERIENCED USERS http://forum.xda-developers.com/showthread.php?t=1978543
5 - IF YOU WILL BE NO MORE ABLE TO START RECOVERY YOU MAY NEED TO INSTALL THE ICS ROM AGAIN FROM THE FIRST STEP SO DON'T FLASH THIS FILE IF YOU NEED TO PRESERVE YOUR ACTUAL SYSTEM
KERNELS WITH NATIVE FEATURESPH85 KERNEL LIST
WARNING: Delete overclockscript and initmodules script before to test!
1) 1.2 ghz https://www.dropbox.com/s/45ocpxi90xxdp8b/PH85KERNEL1.2ghz.zip
2) 1.26 ghz https://www.dropbox.com/s/z001mbh3rurm01i/PH85KERNEL1.26.zip
3) 1.3 ghz - Caution! Maybe unstable https://www.dropbox.com/s/74ucoeoc3xdidxz/PH85KERNEL1.3ghz.zip
BEFORE TO INSTALL THE OVERCLOCK PACKS AND THE KERNEL signed x-loader.bin, signed u-boot.bin and signed recovery are required, FOLLOW THIS GUIDE http://forum.xda-developers.com/showthread.php?t=1978543
KERNELS WITH NON-NATIVE FEATURES
New pack 29/11/2012 with 4-keys kernel
The boot.img files are signed to work with wkpark recovery and Acura2201
OVERCLOCK lightly undervolted (settings similar to stock), PACK WITH MODULES, CPU GOVERNOR & I/O SCHEDULERS
Features:
1) Native boot.img init.d support
2) Native adbd insecure support
3) Overclock loaded by boot.img
4 KEYS FIXED , UNDERVOLTED @ 1208 MHZ https://www.dropbox.com/s/wf1l5jml5a2fx8u/4keysfixed1208mhz.zip
@ 1208 MHZ http://www.mediafire.com/?l0qcujdw0hdqc73
@ 1108 MHZ http://www.mediafire.com/?98m4lpnp434tpcg
Stock clock and volts http://www.mediafire.com/?jxspk7yjfgt0zdf
Not suggested for all, try at your own risk:
Extreme tuning undervolt 333-666-1008-1218 http://www.mediafire.com/?1zwvqhqz95jhks6
JUST APPS & MEDIA PACK feat. TMProduct1onZ
1) Holo Locker
2) Nova Launcher
3) ArcCamera, Gallery (with photosphere feature but still upside/down issue) modded by DefComg Video Editor, Photo Editor by Bether and Camera 360 (updated)
4) ClockSync
5) Dolphin Browser v9
6) DSPManager
7) LgContacts3 fixed by iodak
8) 160 chars Message by DefComg (updated)
9) NoFrills Cpu Control: my favourite settings are hotplug as governor and sio as I/O scheduler
10) Total Commander
- Removes korean titled ringtones
- Changes bootanimation
http://www.mediafire.com/?df789do63fc7w9t
CM10 OVERCLOCK
https://www.dropbox.com/s/36i8ohj68d5a7h8/PH85 OVERCLOCK CM10.zip
--------------------------
OLD PACKS
List of features:
APPS:
1) Holo Locker
2) Nova Launcher
3) ArcCamera, Gallery (with photosphere feature but still upside/down issue) modded by DefComg Video Editor, Photo Editor by Bether and Camera 360
4) ClockSync
6) Dolphin Browser v9
7) DSPManager
8) LgContacts3 fixed by iodak
9) 160 chars Message by DefComg
11) NoFrills Cpu Control: my favourite settings are hotplug as governor and sio as I/O scheduler
12) Total Commander
INIT.D SUPPORT: (credits to thebrainkafka )
1) Overclock and iodak's modules insmod: low battery consumption at high frequencies IT MAY NOT WORK FINE WITH YOUR PHONE
Code:
Stock similar settings:
Code:
echo 0 300 925 > /proc/cpu_control/tweak_cpu
echo 1 600 1175 > /proc/cpu_control/tweak_cpu
echo 2 900 1265 > /proc/cpu_control/tweak_cpu
echo 3 1200 1345 > /proc/cpu_control/tweak_cpu
Suggested settings:
Code:
echo 0 300 900 > /proc/cpu_control/tweak_cpu
echo 1 600 1025 > /proc/cpu_control/tweak_cpu
echo 2 900 1125 > /proc/cpu_control/tweak_cpu
echo 3 1200 1245 > /proc/cpu_control/tweak_cpu
MODULES (credits to iodak)
1) Overclock: symsearch.ko cpu_control.ko
2) tun.ko ntfs.ko sio-iosched.ko (sio I/O scheduler)
MEDIA: pack 1 with Bootanimation and sounds from LG PRADA
pack 2 with TMProduct1onZ bootanimation
VARIOUS SYSTEM TWEAKS: BUILD.PROP with tweaked 3G CONNECTION AND DEEP SLEEP MODE
DOWNLOAD LINKS:
JUST OVERCLOCK PATCH!!!
- SAFE CLOCKS AND LOW VOLTAGE SETTINGS INSTALLED BY DEFAULT, YOU CAN EDIT IT EVERYTIME DIRECTLY INTO THE ZIP OR THROUGH ROOT EXPLORER IN /SYSTEM/ECT/INIT.D FOLDER
- SIMPLE V1: http://www.mediafire.com/?l9ks3yrrw4pu8p5
- SIMPLE V1.1 safer settings: http://www.mediafire.com/?5xr4lu3buwl2m8a
I removed the supercharged series because i tested and doesn't work fine!
RELAXED CLOCK PATCH.. FOR MORE LAZY OMAP4430 CPUS
- JUST RELAXED OVERLOCK: http://www.mediafire.com/?fmj9ws76a2saxsm
MEGAPACK V1 FINAL RELAXED CLOCKS
- ONE VERSION WITH LATEST SMALL TMProuduct1onZ bootanimation: http://www.mediafire.com/?pfp2ig7sun9n6wf
MEGAPACK V1 FINAL
- PACK 1 WITH PRADA 3.0 BOOTANIMATION AND SOUNDS http://www.mediafire.com/download.php?zx31ba5uzavx1fg
- PACK 2 WITH TMProduct1onZ Bootanimation! http://www.mediafire.com/?ryaagoa651e26ag
MEGAPACK BETA 3
- PACK 1 WITH PRADA 3.0 BOOTANIMATION AND SOUNDS http://www.mediafire.com/download.php?t288458vyhbd9sp
- PACK 2 WITH TMProduct1onZ Bootanimation! http://www.mediafire.com/?vm9jb5putchh0yo
SMALL MODS PACKAGES OF PH85 MODS SERIES
- JUST ArcCamera, Video Editor & PHOTOSPHERE: http://forum.xda-developers.com/showpost.php?p=33969780&postcount=165
- JUST CONTACTS, PHONE & MSGS: http://forum.xda-developers.com/showpost.php?p=33970232&postcount=41
- ARM OPTIMIZED I/O SCHEDULERS AND ONDEMANDX GOVERNOR: http://www.mediafire.com/?papxoeprk681cce
ALL THE HUGE THANKS AND CREDITS MUST GO TO:
XBSALL
samno
defcomg
iodak
thebrainkafka
bether
wkpark
Chainfire
milaq
TMProduct1onZ
zeppelinrox
Acura2201 & Franlov
.. and all "Androidians" who share freely the fruit of hard work!
DISCLAIMER: I'm not responsible of eventual damages caused by this file, if something goes wrong blame just yourself :| I CAN JUST SAY I TESTED IT ON MY O3D AND WORKS FINE
Sorry for the poor graphics of the thread!
SCREENSHOTS
Nova Launcher:
-
My Best Quadrant Score at 1268 mhz (now i keep at 1200 for low consumption and best stability)
USEFUL LINKS:
IODAK OVERCLOCK MODULES:
http://forum.xda-developers.com/showthread.php?t=1961989
DEFCOMG CAMERA MODS AND OTHER MODS THREAD
http://forum.xda-developers.com/showthread.php?t=1957839
http://forum.xda-developers.com/showthread.php?p=33922652#post33922652
XBSALL ORIGINAL ICS CUSTOM ROM POST:
http://forum.xda-developers.com/showthread.php?t=1963847
TWRP AND CMW TEMP POST BY REZZSHA:
http://forum.xda-developers.com/showthread.php?t=1960120
TMPRODUCT1ONZ THREAD:
http://forum.xda-developers.com/showthread.php?t=1976475
V6 SUPERCHARGER THREAD!! zeppelinrox ROCKS!! and... SERVICE.JAR AUTOPATCHER
http://forum.xda-developers.com/showthread.php?t=991276
http://forum.xda-developers.com/showthread.php?t=1914159
Acura2201 recovery!! http://forum.xda-developers.com/showthread.php?t=2000288
SUGGESTED APPS
- Adbd Insecure (for use with windows root browsers like Android Commander) go to download here http://forum.xda-developers.com/showthread.php?t=1687590 Credits to Chainfire
- Nova Launcher Thread! http://forum.xda-developers.com/showthread.php?t=1389071
CHANGELOG
V1 ALPHA: 9/11/2012 FIRST VERSION
V1 BETA 2: 10/11/2012
- Removed not useful init.d scripts
- Changed permissions to 755 (rwx -rx -rx)
- Added No Frills Cpu Control
- Added Total Commander
- Fixed Updater Script: unmount /system before mount with busybox and set 777 -rw -rw -rw permission before to extract system folder
- Removed Adbd Insecure due to not accorded re-distribution permission
V1 BETA 3 (almost arriving at final version ): 11/11/2012
- DIVIDED PROJECT IN TWO SUB-PARTS: PH85 MEGAPACK AND PH85 JOCLOCK
For MEGAPACK:
- Moved heavier apps from /system/app to /data folder in order to have more system free space
- Edited overclock with safer setting
- updated ArcCamera.apk to 10 Nov from defcomg
For JOVERCLOCK patch:
- Added V6 SUPERCHARGER SCRIPTS, NITRO LAG NULLIFIER, PATCHED SERVICE.JAR and relative tweaked build.prop (with backup copy of non supercharged build.prop)
- REMOVED UNUSEFUL FILES FROM THE ARCHIVE, sorry i forgot to do it before ;P
V1 FINAL 12/11/2012
- ADDED SAFEST OVERCLOCK SETTINGS
- ADDED SELF-REMOVE /SYSTEM/MEDIA/AUDIO SCRIPT BEFORE INSTALLATION
- Lowered min free space system required
UPDATE 13/11/2012
Updated ArcCamera.apk from defcomg in JPHOTOSPHERE PATCH, just install it!!!
UPDATE 14/11/2012
New updated ArcCamera.apk from defcomg!!!
UPDATE 16/11/2012
Uploaded 3 MODULES PACK!
- Arm optimized sio scheduler (some very little performance improving)
- Arm optimized vr scheduler
- OndemandX cpu governor
Compiled from: Dorimanx-SG2-I9100-Kernel-master-jelly-bean git source, thanks and credits to HIM!
UPDATE 20/11/2012
- Introduced edited boot.img contaning features! Thanks to Acura2201 for the idea!!
- Re-organized PACK projects: divided pack in MODULES, MODULES + OVERLOCK, APPS
UPDATE 8/12/2012
- New kernels, features:
1) GPU at 384 mhz (activated at best CPU frequence)
2) Overlock ram started 466 mhz activated in emif.h, but still not in other parts
3) Added Cpu frequency undervolted
4) Disabled smartreflex thanking to samno, it may drain more battery but it's more stable
5) Tweaked VM thanks samno
6) Added native Pegasusq and ondemandx governors
7) Added native Sio and VR ioschedulers
8) lzma compression for low memory consumption
9) ICS stock memory optimization
10) Tweaked touchscreen thanks samno
UPDATE 10/12/2012
CM10 overlock pack in last posts!
UPDATE 13/12/2012
Fixed poweroff recharge bug in PH85 kernels!
TO DO:
- wait your feedbacks
- wait for defcomg news and update the packages
- searching for interesting kernel features to implement
POSITIVE: alphatia post, tavares_one post, speedyranger post,
NEGATIVE: As expected 3 for the beta 2 version, just test the v1 final and follow the suggestions on TOP of first post
Root explorer is paid app you have to remove all paid apps!!!!
Sent from my LG-P920 using xda app-developers app
Link temporary removed
---
REUPLOADING
https://play.google.com/store/apps/details?id=com.ghisler.android.TotalCommander&hl=en use this instead
I've been toying with aroma, maybe i'll try my luck and see if I can cook up a nice little gui to go along with this. Don't hold your breath though. I stopped by to say nice work, those patches are definitely needed. Have you also checked out some of the scripts from v6 supercharger, really helped with my phone and xbsall's rom.
great job! thx
Enviado desde mi LG-P920 usando Tapatalk 2
Weird :/ ive flashed the zip and nothing changed
Im on the XBSA 4.0.4 ROM (first port not the custom one)
Sent from my P920 using ICS 4.0.4 by XBSA
i flashed but nothing changed i just got the nadb insecure why is that? i tried them both through twrp ..
I tested better the init.d scripts and most are totally not useful, i'll remove it in the next version.
Sometimes the flash with TWRP may fail, just repeat the flash after rebooting the recovery or test with CMW (in CMW use the pwr button as OK)
Sent from my LG-SU760 using xda premium
Hey i tried flashing twice from twrp ,,i tried wiping caches. I tried without wiping and flashed from internal and external sd card and still doesnt work hope u can find a solution i will be waiting
Sent from my LG-SU760 using xda app-developers app
OK there must be some issue in updater script, i'll fix it in the day
Just so I understand, this single zip, when working, will fix some ICS stuff and overclock my phone?
I'm all for that, cheers
Sent from my LG-SU760 using xda app-developers app
LeighR said:
Just so I understand, this single zip, when working, will fix some ICS stuff and overclock my phone?
I'm all for that, cheers
Sent from my LG-SU760 using xda app-developers app
Click to expand...
Click to collapse
It contains all the main actual updates and fixes for the XBSA ICS rom... and some other useful app
Thanks your work is appreciated
I will be waiting.
Sent from my LG-SU760 using xda app-developers app
alphatia said:
Thanks your work is appreciated
I will be waiting.
Sent from my LG-SU760 using xda app-developers app
Click to expand...
Click to collapse
Anyway it's weird it doesn't work, i used the updater script of every other update pack.. Try reinstalling busybox
While i upload the corrected version, anyway the pack can be used to extract the system folder and pushed in the system with: "adb push" if you want to use adb or can be pushed with terminal emulator or alternatively with root explorer or equivalent
That's great, thanks
Did anyone figure out how to send a message greater than 160 chars, other than using a different app such as handcent? I changed the message.apk file and it did jump from 80 to 160 chars but still crashed if I went over.
Also, anyone know how to change the battery icon to show a %age? I think UOT Kitchen only works on GB ROMs. Might be nice to add to the patch if anyone knows
Sent from my LG-SU760 using xda app-developers app
Ok something weird happened i hope u could help me i didnt have busybox so i installed busybox pro and after installation i cand boot into twrp recovery any more i also uninstalled busybox still cant boot to recovery and also installed recovery again ,,,still no luck i hope that u can help me plz
Sent from my LG-SU760 using xda app-developers app
alphatia said:
Ok something weird happened i hope u could help me i didnt have busybox so i installed busybox pro and after installation i cand boot into twrp recovery any more i also uninstalled busybox still cant boot to recovery and also installed recovery again ,,,still no luck i hope that u can help me plz
Sent from my LG-SU760 using xda app-developers app
Click to expand...
Click to collapse
After busybox re-install this: http://milaq.exnet.me/downloads/android/p940/P940RecoveryInstaller.apk
Thanks for the quick reply i re installed the recovery but still cant boot to recovery please help me it would be much appreciated
Sent from my LG-SU760 using xda app-developers app
Related
Broadcom finally help me in development . thankyou broadcom !
You like my hard work ?
consider making a donation !
http://forum.xda-developers.com/donatetome.php?u=4418296
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
No need mirrors
kernel for Galaxy Y (GT-5360)
Version: Olders Versionsmediafire
Version: 0.8.0 RC3mediafire
Version: 1.3.3 MOD EDIT: Link Removed
Version: 1.3.3mediafire without AD
LOG:
version 0.1
added adb suport
added init.d
added dnsproxyd
Version 0.2
added droidwall support
Version 0.3
added cpu governors ( conservative, userspace, powersave )
Version 0.3.1
added cpu governor (interactive ) thanks infarburgs for governor !
Version 0.3.5
added cpu governor smartassV2
Version 0.4.0
added swap suport
zramswap
zramswap compression !
Version 0.6.0
applied patch
CPUSpy support app (http://goo.gl/qEQxw)
3 cpu frequencies (312,624 and 832 mhz)
fixed error in reading CPU clock
Version 0.6.5
add i/o schedulers
cfq-iosched
deadline-iosched
sio-iosched
vr-iosched
Version 0.7.0
support EXT2/3/4 and JBD2
fixed compatibility with alls governors
tweaked ondemand governor and smartassV2
Version 0.7.2 RC
fixed init.d (no work )
Version 0.7.3
fixed init.d (finally) :highfive:
Version 0.8.0RC
using merruk ramdisk!
added clockwork!
added root (super user)
added busybox
added other things !
Version 0.8.0 RC 2
removed superuser (90 % user using custom roms )
fixed compatibility with roms !
Version 0.8.0 RC 3
fixed busybox
fixed compatibility with alllllls roms ! (creeds,repencis,bla bla ,blu blu !! )
Version 1.0
- Added support alls bootanimations like my kernel cm9 (its in ramdisk )
- 5 frequencies (832-624-468-312-156) merged from kurotsugi
- + profiles of brightness merged from koneu
- fixes for clocks speeds ...
- tweak block size of files (more speed in read and write )
Version 1.0.1
- fixed bug where some of governors not worked
Version 1.2.0
- Added Zram (read post 2 for more informations )
- More netfilters
- EXT4 support for system,data and cache
- Fixed minor bugs
Version 1.2.5
- minor fixes
- update busybox (some apps can not detect it (same system installer app) but a lot of titanium and other vain decta it .. anyway he is working
- added 2 metods init.d now ...
Version 1.3.3
- + 100 patches on kernel linux
- tweaks and patches for system rfs ,ext 2,ext3, ext4
- modified memory allocation on kernel linux
- battery drain reduced with +20 tweaks ...
- more thinks ( i no remeber )
-PS : need install new wifi driver ! go for wifi theard
Instructions for .tar file:
Download odin 1.8.5 mediafire
Connect phone in download mode
Select PDA
Select kernel
Press start
Ready
Instructions for .zip file:
Download cwm mediafire
Turn on recovery mode
Install from sdcard*
Select cwm madteam
In cwm select install zip from sdcard
Select kernel.zip*
YES and enjoy
thanks for :
Maroc
irfanbagus
mikstev
savie
hellock(merged thinks on ramdisk )
If it helps you, please press thanks
zRAM
What is zRAM?
This is a mainline kernel feature for Compressed RAM block device support (CONFIG_ZRAM)
http://en.wikipedia.org/wiki/ZRam
Like many of the other tweaks done in the Android world, ZRAM is another one of them that is controversial, probably because people only think in terms of immediate performance they can measure easily with benchmarks etc. *Here is my take...think I will add this to the Q&A section as well.
But, will it make my device faster? Will I score higher on benchmarks?
It depends, but for normal usage, the answer is no. zRAM is most useful for those that are configuring Android to be a true multitasking workhorse. For example, if I enable zRAM, open an bunch of apps at one time, and actually start to work towards depleting the memory of the system. *For example, say I open system tuner, a browser with several tabs, a word processing app, a game, and perhaps a picture viewing app or a movie. If I don't formally close out of each one by hitting back and just begin switching between apps and the home screen, you will see zRAM start showing benefits.*
If you tweak the Android memory and swappiness settings, this can also be useful in this type of environment.
So, unless you have a heavy workload as stated above, then it won't be of a lot of use for the casual user.
How do I enable zram?
It must be enabled by a script. Some ROMs may support activating it. If you need to do it yourself you have two choices.
1) Save this to a file and run the script from terminal, Script Manager or System Tuner.
2) Or better yet, save this to a file called 90zram (or whatever you prefer) in /system/etc/init.d and automate it (The ROM's ramdisk needs to supports init.d)
Code:
#!/system/bin/sh
# auto zram activation init script with busybox search
# by show-p1984
echo "[90ZRAM]: Firing up /system/etc/init.d/90zram";
if [ ! -e /sys/block/zram0/disksize ] ; then
echo "[90ZRAM]: ERROR unable to find /sys/block/zram0/disksize";
echo "[90ZRAM]: Is this a ZRAM kernel?";
echo "[90ZRAM]: ZRAM NOT ACTIVATED. (404)";
else
#find busybox in /system
bblocation=$(find /system/ -name 'busybox')
if [ -n "$bblocation" ] && [ -e "$bblocation" ] ; then
echo "[90ZRAM]: busybox found in:" $bblocation;
echo "[90ZRAM]: Setting ZRAM disksize.";
echo $((100*1024*1024)) > /sys/block/zram0/disksize
echo "[90ZRAM]: Starting ZRAM...";
bblocation=${bblocation%/*}
cd $bblocation
./busybox mkswap /dev/block/zram0
./busybox swapon /dev/block/zram0
echo "[90ZRAM]: ZRAM activated.";
else
echo "[90ZRAM]: ERROR! busybox not found!";
echo "[90ZRAM]: Is busybox installed? Symlinks set?";
echo "[90ZRAM]: ZRAM NOT ACTIVATED. (404)";
fi
fi
Performance Tweaks
These are a couple of tweaks that many are using for faster benchmarks and better battery performance. Google it and decide for yourself if you like the risk or not. I recommend that you do a full backup in recovery and regularly backup your /data partion or cloud sync if you enable these options. Will many run them daily as I now do, there is some additional risk. These can be added to scripts and automated via init.d or other apps/tools that support them.
To disable fsync for better battery and better disk i/o performance:
Code:
echo 0 > /sys/class/misc/fsynccontrol/fsync_enabled
To enable fsync for better data integrity (default)
Code:
echo 1 > /sys/class/misc/fsynccontrol/fsync_enabled
Faster disk i/o - remount /data partition with noauto_da_alloc option (google it, better battery, less data integrity)
Code:
mount -o remount,noauto_da_alloc /data /data
kernel build from GT-S5360_GB_Opensource_Update2 (opensource samsung )
version 2.6.35.7
Sources
https://github.com/Whitexp/GT-S5360-opensource-Update-2
Wooooohh. so its an opensource... so it really fits to any kind of build roms or cusrom sir? Tnx a lot for enlighthenment.. dl it later coz im in mobile mode.. tnx a lot. Great job sir.. btw, how to test the droidwall if it is really working?
Sent from my GT-S5360 using xda premium
Wow....great kernel...please add overclocking feature to this kernel....i am soo desperate for overclocking...
kentoi me said:
Wooooohh. so its an opensource... so it really fits to any kind of build roms or cusrom sir? Tnx a lot for enlighthenment.. dl it later coz im in mobile mode.. tnx a lot. Great job sir.. btw, how to test the droidwall if it is really working?
Sent from my GT-S5360 using xda premium
Click to expand...
Click to collapse
yes
i tested now ..
droidwall work
Infarnburg???
Do u mean irfanbagus
Only 3.43 mb, great.loving it.Are governors working.
premolikeshtc said:
Only 3.43 mb, great.loving it.Are governors working.
Click to expand...
Click to collapse
not all!
working on it!
btw i sleep now lol
Cannot read setcpu custom .....
testing
testing this kernel now.. It works great
-------------
iplaygalaxyy for android
Great kernel, hope it will support swap soon.
what are the working scheduler and kernel profiles?
midouban26 said:
what are the working scheduler and kernel profiles?
Click to expand...
Click to collapse
i/o scheduler?
until the moment, i has not yet put them!
premolikeshtc said:
Cannot read setcpu custom .....
Click to expand...
Click to collapse
thanks for feedback !
updated kernel
version 0.4.0
rep
guys i am unable to download 4.0 kernel . plz provide me a link thanks in advance
shailu1990 said:
guys i am unable to download 4.0 kernel . plz provide me a link thanks in advance
Click to expand...
Click to collapse
link fixed ..
google drive link
see first post !!
This kernal install perfect to mai007 method?
Sharmaskss said:
This kernal install perfect to mai007 method?
Click to expand...
Click to collapse
yes ..
in windows
use 7zip to extract file .tar
[KERNEL][ICS][OC/UV-1.42Ghz+][V3.0.0][P920/SU760][10/03/2013] Jeckyll & Hyde Kernel
Hi, so I finally decided to make an ICS kernel. Here it is, I will adding more gradually as & when I get time or be bothered to . This thread is for mainly development and fun, please use this thread > http://forum.xda-developers.com/showthread.php?t=2077103 in General regarding questions further info and stuff to keep as much crap out of here as possible and to keep the thread clean. Please don't post useless/unrelated/not fun posts or ak for ETA's please because I won't respond or may not bother doing the kernel anymore.
Main Feature List
-Based On ICS V30B For SU760
-Linux Kernel Version 3.0.21/Sneaky Weasel
-Over Clocked CPU Upto 1.42Ghz+
-Live OC For CPU (Change Frequencies To The Max For You Device)
-Max OC @ Boot Set To 1.22Ghz
-Modified Frequency Table
-Pre-Under All Volted CPU Steps Plus User Space UV Interface
-GPU Clocked At 384Mhz
-Modified Ram Disk
-Lots Of IO Schedulers (9 In Total, SIO As Default)
-Init.d Script Support & Automated Folder Creation
-4-Key Fix For P920 Version
-Other Small Tweaks
-For More Info See Changelog's & Github Commits
Prequisites & Installation Instructions
Prior to this installation you MUST:
-Be On Ported ICS Or A Derivative Of It From Here > http://forum.xda-developers.com/showthread.php?t=1956347
-Flashed wkparks Modified Bootloaders From Here > http://forum.xda-developers.com/showthread.php?t=1971014
-Flashed Dexter_nlb's Recovery, Either TWRP Or CWM (I Use CWM) From Here > http://forum.xda-developers.com/showthread.php?t=1978543
-Make A Backup Or Have A Backup Kernel That You Know Works On Your SD Prior To Flashing Just In Case.
-Read The Whole Post Carefully, I Will Not Answer Questions Related To The Kernel If The Answer Is Already Here.
Ok next...
-Download & Copy The .ZIP File Into Your SD.
-Restart The Device Into Recovery
-At This Stage You Can Wipe The Cache's If You Want Or Continue To Next Step.
-Then Choose Install Zip from SD Card, Either Internal Or External. Wherever You Saved It.
-Select The .ZIP File & Install It.
-Reboot Your Phone & You Should Be Good To Go.
-Just Give A Few Minutes As First Boot May Take Longer Than Usual.
Bugs?
I don't know yet havn't tested to much but everyone knows that not all silicon is capable of higher clock frequencies you have been warned I take no responsibility if something goes wrong or if something's don't work as expected. I cannot test this on each ROM but im using it with the completely stock port.
To-Do/Dream List
If you would like to see a tweak/mod implemented in my kernel PM me with information about the tweak and also a link to any source code relating to it.
I Hope Or Plan To Be Able To:
-OC More Than Before
-CPU/GPU OC/UV Interface
-Native Dual Boot
-More Feature & More Fixes Than Before
Customisation Screenies
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Credits
Thank you to: xbsall, wkpark, Dexter_nlb, defcomg, Pesach85, iodak, TMProduct1onz, Ezekeel, SonicXML, jdoreclipse, faux123, franciscofranco, imoseyon, my users & followers, the rest of the O3D community and XDA as without you guys I would never of got into or done anything like this. This kernel is made up of lots of patches and stuff some of which does not have a specific source detail and some that other dev's have if you feel i've left someone out PM me and I will sort it out as quickly as possible. If your name does not appear here check out my commits as I may have credited you there.
Code:
[SIZE=4][B][U]Changelogs[/U][/B][/SIZE]
[B][U]V3.0.0 Changelog Changes Up To 10/03/2013[/U][/B]
-Smart Reflex Tweaks
-Entropy Tweaks
-Interactive Governor Updated
-Added Some Optimized And Updated System Operations
-Touchscreen Sensitivity Tweaks
-Decreased WI-Fi Voltage
-Some Other Minor Shizz
-Included SU760 Display Modules For Compatibilty With P920 Roms
[B][U]V2.1.0 Changelog 03/03/2013[/U][/B]
-Added Force Fast Charge By Chad Froebel Ported By iBluemind
-Added FIFO IO Scheduler (NOOP Style IO)
-Removed Some Frequency Slots (Need Your Opinion,Better?)
-Added Optimised CRC32 Algorithm
-Added Dynamic FSYNC by faux123 (Use TricksterMod To Activate)
-Added CPU Topology & Enabled ARCH_POWER
-Enable ARCH_POWER
-Added Module Pack (See 4th Post http://forum.xda-developers.com/showpost.php?p=36148744&postcount=4)
-Added SU760 Version
[B][U]V2.0.0 Changelog 21/01/2013[/U][/B]
-Added Screen Off Max Frequency Functionality
-Ram Disk Tweaks
-Added GPU Step Of 384Mhz Using Same Voltages 307Mhz For Now
-Reverted Back To Gz Compression
-Removed Pointless Governors
-Increased User Hz For Smoothness
-Temporarily Removed KSM & ZRAM From Build
-Ability To Read GPU Frequency
-Removed 1.5Ghz & 1.6Ghz Since Nobody Reported Them Working
-Source Now Linaro Compiler Friendly & Built With Compiler Tweaks
[B][U]V1.2.0 Changelog 08/01/2013[/U][/B]
-BFQv5 IO Scheduler
-Ram Disk Tweaks
-Partial Port Live OC By Ezekeel (Now Change CPU/MPU Frequencies On The Fly)
-Native Init.d & Init.d Folder Support
-Added Fsync Control By Ezekeel
-Partial Port Of Sound Control By Ezekeel (Enabled High Performance Audio/Set As Default)
-Built With KSM (Not Enabled)
-Built With ZRAM (Not Enabled)
-Reverted VM Readaheads (User Changeable In Apps Anyway)
[B][U]V1.1.1 Changelog 02/01/2013[/U][/B]
-Switched Kernel Compression To LZMA
-Ram Disk Tweaks
-Changes to OC System
-Hotplug Should Now Definately Be Default
[B][U]V1.1.0 Changelog 02/01/2013[/U][/B]
-Increased Max OC Of CPU To 1.6 But Only 1.42 Is Working For Me
-Min Clock 307Mhz & Max Clock 1228Mhz Set @ Boot
-Added More CPU Frequency Steps (16 In Total)
-Increased VM Readaheads
-Set Kernel Hz to 512
-IO Tweaks
-Other Small Tweaks
[B][U]V1.0.0 Changelog 02/01/2013[/U][/B]
-Added 1.2Ghz Slot
-Lowered & Increased Some Voltages
-Increased CPU Thermal Throttle From 61 Deg C > 71 Deg C
-Some Other Minor Changes
[B][U]V0.9.0 Changelog 01/01/2013[/U][/B]
-Initial Stock Based Release
Downloads
Kernel Source/Useful Links/Info/Apps/Other
To access some kernel features more easily I recommend you use this free app > http://forum.xda-developers.com/showthread.php?t=1768315
-Kernel Discussion Thread > http://forum.xda-developers.com/showthread.php?t=2077103
-Kernel Source > https://github.com/samno1607/Jekyll-Hyde
-Kernel Modules > See Attachment(Non-Flashable) - blutooth.ko, btwilink.ko, cfg80211.ko, cifs.ko, crc7.ko, hsi_char.ko, lib80211.ko, mac80211.ko, nls_utf8.ko, rfcomm.ko, rpmsg_clien_sample.ko, rpmsg_server_sample.ko, scsi_wait_scan.ko, tun.ko, wl2xx.ko & wl2xx_sdio.ko.
samno said:
Kernel Source/Useful Links/Info/Apps
-Kernel Source > https://github.com/samno1607/Jekyll-Hyde
Click to expand...
Click to collapse
Great work Samno! Well done! :good:
Finally a kernel from samno !!!!
Sent from my LG-P920 (ICS Ported)
Try Use THANKS Button If I Helped
OS_Hacking said:
Finally a kernel from samno !!!!
Sent from my LG-P920 (ICS Ported)
Try Use THANKS Button If I Helped
Click to expand...
Click to collapse
Yup been M.I.A for far too LonG:good:
Any ETA for cm10 compatibily? good job
Sent from my LG-P920 using XDA Premium HD app
No etas
Sent from my LG-P925 using xda premium
---------- Post added at 02:31 AM ---------- Previous post was at 02:28 AM ----------
Please don't post useless/unrelated/not fun posts or ak for ETA's please because I won't respond or may not bother doing the kernel anymore.
Sent from my LG-P925 using xda
wayno140 said:
No etas
Sent from my LG-P925 using xda premium
---------- Post added at 02:31 AM ---------- Previous post was at 02:28 AM ----------
Please don't post useless/unrelated/not fun posts or ak for ETA's please because I won't respond or may not bother doing the kernel anymore.
Sent from my LG-P925 using xda
Click to expand...
Click to collapse
OK understood sorry
Sent from my LG-P920 using XDA Premium HD app
I have followed the steps to install ROM but keep running into the same issue.
When selecting to install from ZIP in CWM I get the following message after the update has started running....
assert failed: getprop("ro.product.device") == "p920"
getprop ("ro.build.product") == "p920")
(Status 7)
Installation aborted.
Any ideas please?
Thanks, Tom
good to see you BACK!!!!! v1.0 boots up fine but no boot with v1.1?? what proc speed is set at boot? maybe too high?
i need kernal 1.4 for rom offsical v20f
samno said:
Kernel Source/Useful Links/Info/Apps
To access some kernel features more easily I recommend you use this free app > http://forum.xda-developers.com/showthread.php?t=1768315
-Kernel Discussion Thread > http://forum.xda-developers.com/showthread.php?t=2077103
-Kernel Source > https://github.com/samno1607/Jekyll-Hyde
Click to expand...
Click to collapse
That app is awesome. All in one! Thanks!
Sent from my LG-P920 using xda app-developers app
tominski said:
I have followed the steps to install ROM but keep running into the same issue.
When selecting to install from ZIP in CWM I get the following message after the update has started running....
assert failed: getprop("ro.product.device") == "p920"
getprop ("ro.build.product") == "p920")
(Status 7)
Installation aborted.
Any ideas please?
Thanks, Tom
Click to expand...
Click to collapse
in the zip file path META-INF\com\google\android\ look for updater-script and delete the assert line and get prop save it put it back in zip and flash again
think build.prop might still be su760
He didn't wanted to ask here.
Sent from my LG-P920 using xda app-developers app
9079 score with cpu 1.4.
But the battery ends in 12 hours without using it.
Howdy...
So how's it going guys, I need some feedback. What changes would you like to see? Please reply in discussion thread > http://forum.xda-developers.com/showthread.php?t=2077103 , I'm hoping to get a release done tommorow if I get time or early next week so the more comments the better
V1.2.0
New update up guys, see OP's for the epic changelog.
samno said:
New update up guys, see OP's for the epic changelog.
Click to expand...
Click to collapse
I confess i "stolen" from your github the LiveOC source code...
Should i risk the jail?
I implemented it in my the CM10 kernel.. which is giving epic headache!
OK jokes apart, could you give me some little hint on how to increase the signal reception?
In CM10 looks so low...
In ICS i have not the problem because i used Acura ramdisk.
Thanks again in advance
DARKROOM INTERNATIONAL V2
We bring the expected and longed International V2. Everything made ??from scratch, base cover Xbsall Ics (XDA), with the kernel itself Team, Team spectacular mod and more nice .............
A slow to see the light, but we believe that a rom has gone very, very good. We hope comments and try how it work.
The rom is with right to work at 100%, and that everyone gets what interests you.
Has many settings, besides enhancing the rom tweaks inall aspects. Reading sd, screen sensitivity, 3G and wifi speed, reduced power, zipaling startup, defragmentation, etc .......
Besides Team own kernel with OC Cpu, Cpu UV, Oc ram, GPU OC, improved ram, init.d habiliado from the kernel, etc ....... and much more.
One novelty is to regulate yourselves the CPU voltage from SetCPU for example, we get 1.5 MHz of the CPU Oc. Here, as we know, each O3D is a world, therefore there will be terminals they will support and others do not.
Being able to regulate the voltage to frequency, we can adjust much consumption and regunlando well, we can get reduced consumption. Below we explain how to adjust this.
The Mod, c'mon, awesome job that gives unbeatable elegance to our gadgets, android envy of the world.
ONLY INSTALL IF YOU HAVE ICS ROM ported from the SU760, BY XBSALL
ONLY INSTALL IF YOU HAVE RECOVERY IN PARTITION
ROM
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CHANGELOG
- Base ICS Korean (Thanks XBsall)
- All translated into more than 30 languages
- Rooted and Deoxed
- Zipaling
- New gobernors
- New ways reading SD
- Kernel Darkroom
- Optimized Ram
- Boot optimized
- Improved SD card reading and much ......
- Tweak screen sensitivity
- Tweak scrolling
- Enhanced data rate 3G, wifi
- Tweak in wifi, less consumption
- Tweak battery consumption
- Boot Defragment
- And more ...... Tweaks
- Visual customization of the rom
- Battery in percent 1%
- Off mode CRT screen off
- Bravia Engine
- Improved sound AC! D Sound
- Camera Original retouched by Defcomg (14Nov.iArccamaraRC2) (Thanks)
- Camera JB 4.1.2
- Official JB Gallery 4.1.2
- Keyboard LG
- JB official Keyboard 4.1.2
- Face Unlock Unlock
- Apk sms
- ES File Explorer
- Busybox
- Led Tesla
- Quick Boot (to go directly to the recovery)
- The Official Team Darkroom Apk
- Team Wallpapers Darkroom
- More than we allow ourselves safe ........
KERNEL
First thank Pesach85 of xda that has taught me to compile a signed boot and solve certain problems with compiling the kernel binary.
It's been a long hard journey, as I lost my ubuntu and data, hence the long delay. Get to the point
Ramdisk Tweaks:
- Taskiller increased for better management of the RAM
- Load modules from ramdisk
Kernel Tweaks:
- Added "Voltage Control v2" (You can play either the voltage frequencies, so you can have as fecuencia you want to increase the voltage or down if your phone supports it. Set entity 750mV to 1500 mV. Advisable not shift from 1400mV. We are not responsible for any damage to your CPU)
- Overclock to 1500MHz!
- Added a lot more often for more battery saving.
75MHz, 150MHz, 250MHz, 350MHz, 450MHz, 600MHz, 858MHz, 10 08MHz, 1108MHz, 1208MHz, 1308MHz, 1350MHz, 1400MHz, 1500 MHz
- UNDERVOLT, enough to start you all.
- Added CPU Topology
- Set hotplug system as governor and adjusted.
- Added VR and SIO schedulers, and tight deadline. SIO as Set system scheduler.
- Added Lazy governor and governor Wheatley
- Used as binary to compile the latest version
- OC GPU to 384 MHz
- Added "Fsync Control"
- Added libraries to increase copying and moving data
- Added drivers for our GPU originals (ported from GN)
- GPU OC to 460Mhz
- Added a new frequency to the GPU. Now: 157.6 Mhz-384Mhz-460Mhz
- Added a new line voltage higher than stock for added stability at very high frequencies.
- Latency of 300 to 30.
Very fast and stable, and RAM management is infallible.
Well let me explain a few things, you can use at voltages as NSTools programs for editing (recommended), Perfomance, Voltage Control, SetCPU, Rom Toolbox ... etc
Finally the last point that I want to explain is the Fsync Control, this means that you can disable that can cause data loss in a crash / freeze and can also lead to problems if two or more processes accessing the same file. Furthermore disable reduces the number of operations by reducing battery consumption and increase system performance.
It can be disabled by creating a script, paste the following into or empty file and place it in / system / etc / init.d / named XXFsync (where XX is any number):
Code:
#!/sytem/bin/sh
echo 0 > /sys/class/misc/fsynccontrol/fsync_enabled
INSTALLATION
ONLY INSTALL IF YOU HAVE RECOVERY IN PARTITION
1. Put the zip in SD
2. Ask for carrying TWRP recovery:
WIPE ------ WIPE CACHE ------FACTORY RESET------SYSTEM
2a. Normal recovery for CWM:
WIPE CACHE------WIPE DAVIL CACHE------WIPE DATA------FORMAT SYSTEM------FORMAT DATA
3. Install zip
4. Reboot
It takes a little to start, patience ................... seems to stay frozen, but do not worry, it's normal, are more than 700mg of rom and takes to boot.
When configuring acabeis the first time around, restarting a few times, so that it works as it should and stabilizes. At first it costs apks open, but now see the difference when you start using it.
Download link: http://d-h.st/LO7
ROM INTERNATIONAL V2 WHITOUT MOD
Download link: http://d-h.st/tCA
If you want to put icons for phone, contacts, sms, mail in chrome as in the images of the launcher, stay above and clicking when you solteis appears a little circle with a brush, push up and you will see a screen with all the icons available. Marcais which querais and ready.
:laugh:Thanks to all who have donated, thank you:good:
Comments and hope you enjoy it.
To thanks cost nothing.
If you like our work, you can invite a few beers
RESERVED
international original kernel v2
Download
http://d-h.st/t2R
Thanks but i have one Question did you guys add ARABIC lang to this ROM
Would you please make a zip for us to flash original theme (setting, battery, call, ..etc) for this Rom. Thanks for your work!
hi, thank you for rom, it is perfect.
but i have only one problem, same of version 1 :
if i try to shutdown phone , it restart.
if i get shutdown and i link the battery charger, the phone turn on
please, if you can, help me
Click to expand...
Click to collapse
What version of u-boot and xloader hace you?
Enviado desde TheDarkRoom
Great work guys! I want flash the kernel ICS V1.0 of iodak, In this Rom can we install other kernel or have the same problem whit v1? Thanks!
Tank you
Sent from my LG-P925 using xda app-developers app
help!
I put it on my phone in TWRP recovery, and now it just restarts.
But before it was: WIPE ------ WIPE CACHE ------FACTORY RESET------SYSTEM
After install and i push reboot system button.
Now there is only the LG logo, vibrates and power off. :crying:
become unusable?
Before V1 on the phone was when it happened.
(I'm sorry, I'm Hungarian, and my English is bad) - Google Translate
shutdown problem solved
Click to expand...
Click to collapse
The problem has been corrected? Now it safe?
Thanks guys, even without overclocking this ROM feels very slick. I have found an issue with taking 3d pictures, the seems the saved pictures format and orientation is stuffed up. Another issue is that MMS will not send for me either with the included application. Would also like to request stock theme as well.
Sent from my LG-SU760 using xda app-developers app
"phone" APN for ATT Thrill
rom installed as advertised and everything works nicely (1408 overclock gave me some reboots so I knocked it back to 1350) The only bit of advice I have for att users is that the "phone" apn that allows up to 14mb speed instead of 7 is not included and needs to added by the user.
Rom Internatonal V2 without mod available in the first post
http://forum.xda-developers.com/showthread.php?p=36962696
The first time I set up and saved WIFI config ,but when I turned on WIFI, WIFI didn't connect. So I had to forget the network and set up it again, then it's worked perfectly.
This Rom's better than V5.2 - XBSALL ?
ecb41tza said:
Rom Internatonal V2 without mod available in the first post
http://forum.xda-developers.com/showthread.php?p=36962696
Click to expand...
Click to collapse
So this is just without the visual mods?
Sent from my LG-SU760 using xda app-developers app
---------- Post added at 02:58 PM ---------- Previous post was at 02:56 PM ----------
Has anyone had success with setting the cpu minimum below 250? Mine always freezes below 250 and randomly about 1250 odd
Sent from my LG-SU760 using xda app-developers app
saint_cow said:
So this is just without the visual mods?
Sent from my LG-SU760 using xda app-developers app
---------- Post added at 02:58 PM ---------- Previous post was at 02:56 PM ----------
Has anyone had success with setting the cpu minimum below 250? Mine always freezes below 250 and randomly about 1250 odd
Sent from my LG-SU760 using xda app-developers app
Click to expand...
Click to collapse
Look frequencies
ecb41tza said:
Look frequencies
Click to expand...
Click to collapse
I suspect my phone may be somewhat of a softy, she doesn't like the low (or really high) frequency
Sent from my LG-SU760 using xda app-developers app
xafalo said:
DARKROOM INTERNATIONAL V2
We bring the expected and longed International V2. Everything made ??from scratch, base cover Xbsall Ics (XDA), with the kernel itself Team, Team spectacular mod and more nice .............
A slow to see the light, but we believe that a rom has gone very, very good. We hope comments and try how it work.
Hi bros;
Your works are really EXCELLENT!!!
You' all are brilliant!
It's really worth waiting for.
Keep it up!
Thanks!
Khafly
Click to expand...
Click to collapse
arany0218 said:
I put it on my phone in TWRP recovery, and now it just restarts.
But before it was: WIPE ------ WIPE CACHE ------FACTORY RESET------SYSTEM
After install and i push reboot system button.
Now there is only the LG logo, vibrates and power off. :crying:
become unusable?
Before V1 on the phone was when it happened.
(I'm sorry, I'm Hungarian, and my English is bad) - Google Translate
Click to expand...
Click to collapse
Hi I had the same problem with acura's rom. For me it was the kernel cause when im using theirs my phone shuts off or stuck at the boot logo. so I put iodak's kernel on it at its working perfect now. btw now I'm using ICS International v1 with this kernel: http://forum.xda-developers.com/showthread.php?t=2019208
Hope it helps!
In Hungarian:
De leirom magyarul is:
Szia nekem is ezt csinalta a telefonom acura ROMjaval.. nekem a kernel nem volt stabil azert indult allandoan ujra vagy csak az lg logonal maradt.. utana felraktam ezt: http://forum.xda-developers.com/showthread.php?t=2019208 a kernelt es mukodott. remelem ezzel a ROMmal is mukodik! ha van meg kerdesed megprobalok segiteni.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
New International V3 of Team Darkroom, the wait was worth it. Again, we have done a great job Team, the sensations we have are excellent.
INTERNATIONAL V3 XXL ONLY IF HAVE PARTITIONS BIG EUROPEAN ICS BY XBSALL
Source from Xbsall: http://forum.xda-developers.com/showthread.php?t=1963847
Bin Large Partition from Xbsall: [URL=http://d-h.st/dxl]28brtlarge.rar - 323.46 MB[/URL]
OPTION #2: V28b Prerooted with larger System/Data Partitions
This ROM is going to upgrade you to ICS, NO MATTER if you are on GINGERBREAD, on PORTED ICS or JELLYBEAN.
FLASH THIS ONLY IF YOU DON'T HAVE V28B PREINSTALLED AND ROOTED IN YOUR P920.
DONT FORGET TO KEEP A BACKUP OF YOUR INTERNAL SD AND YOUR DATA AT YOUR PC CAUSE ALL WILL BE ERASED.
If you want more space in SYSTEM and DATA PARTITIONS you can use this 28brtlarge.rar
This process is for advanced users.
Download and extract it..
Take a CWM BACKUP (NOT with 2nd init CWM or TWRP Recovery)
Take a BACKUP of your InternalSD DATA at your PC
Flash the BIN file with LG FLASHTOOL
Reboot
After it gets flashed PRESS VOLUME DOWN and POWER until the factory reset screen appears.
Factory Reset
After ANDROID starts go into your SETTINGS > STORAGE and ERASE INTERNAL MEMORY and restore your Internal SD Data from your PC
REBOOT to CWM RECOVERY
Format SYSTEM
RESTORE YOUR BACKUP
That's it
Click to expand...
Click to collapse
Source in Spanish: http://www.thedarkroomteam.com/index.php?topic=392.0
To install the rom V3 International XXL we must change the recovery:
Bootloader 1.10+TWRP Recovery: VOL + / 3D Button and Power
When you leave the red LG logo, release Power and keep holding down the other two until it TWRP recovery.
Bootloader 1.10+TWRP
or
Bootloader 1.25+TWRP Recovery: VOL - / 3D Button and Power
When you leave the gray LG logo, release Power and keep holding down the other two until it TWRP recovery.
Bootloader 1.25+TWRP
Unzip the file to the desktop, open the folder and run the Unlock.bat
With the phone with the battery removed, put the USB and get a warning when 5 seconds .... put the battery and hopefully cmd screen is solid green. We already have the recovery position.
If bat file don't ends check you have installed
Let Device Manager.
Connect the phone without battery, only the usb and windows began to emit sound on and off, now we have to go to Windows Device Manager, and see how it comes and goes the OMAP4430 or Cosmo.
We must be vigilant and click with right button above, select update driver and select the previous rar, folder (usb_drv_windows) updated once disconnected the phone and go to the folder the bootloader.
Click to expand...
Click to collapse
CHANGELOG
-Base Ics EURO V28B
-System partitions to 1'54gb (Thanks to Xbsall)
-Deoxeada and Zipaling
-kernel Darkroom
-Optimized startup
-Improvements in battery consumption
-Better use of RAM
-New governors Cpu
-Improved Reading Sd
-Improved sensitivity of screen
-Improved data rate, 3G, Wifi
-Battery percentage 1%
-Sounds JB 4.2.2
-Sound notification exclusive Darkroom
-Original Keyboard LG
-Original Keyboard Sony Xperia Z
-Shutdownanimation and Bootanimation Darkroom
-ES Explorer
-Voltage Control
-Tesla Led
-QrDroid
-Quick Boot
-WhatsApp
-Dolphin Browser
-Flash Player
-LgHome Launcher 3.0
-Atom Launcher
-Pie Control
-Wallpapers Darkroom
-The official Team Darkroom Apk
Ramdisk characteristics:
-Added support for init.d
-Adjusted Taskiller
-Removed on interactive startup (Start hotplugx default)
-SWAP to ZRAM changed much faster.
Kernel Characteristics:
-Updated version of the Linux kernel 3.0.21 to 3.0.23.
-Added support for ZRAM.
-Lowering the speed of the GPU for stability.
-Replaced hotplug by hotplugx. (Thanks to imoseyon).
-Improved compression of the kernel.
-Added LiveOC v2. (Thanks to Ezekeel)
-Added ZEN and ROW schedulers. (ROW Snatch default scheduler)
-Underclock GPU for greater stability and less consumption. (157.6 MHz, 307-404MHz 2MHz)
-New set of frequencies.
-UNDERVOLT at some frequencies.
-Changed to "Voltage Control v1". (You will be able to touch the voltage of any of the frequencies, so I can have s as often you want to increase the voltage or down if your phone supports it or for less consumption)
-Improved stability at high frequencies.
-Added Fsync Dynamic.
-Added Sound Control v1. (Thanks to Ezekeel)
-On ARCH Power
-Off Fair Sleepers
-Tweak Ondemand governor.
And other things that I have left out
INSTALLATION
XXL V3 INTERNATIONAL IS ONLY IF WE HAVE to flash and partitions BIG IN EUROPEAN ICS XBSALL
Put the Rom in Phone Memory.
Entered the Recovery.
We WIPE ------ WIPE CACHE ------ FACTORY RESET ------ SYSTEM
Again all three times to make sure there is none of the above.
Install the. Zip
Reboot the phone, and hope has to start.
Once we start to install everything, and we start to configure it to our liking. It is recommended to restart the phone 2 or 3 times to settle everything.
To optimize a little more change these two values:
Settings> Developer Options
Window animation scale "change the value of 1x" to 0.5 x
Animation scale "change the value of 1x" to 0.5
ROM DONWLOAD LINK
SOURCE:www.thedarkroomteam.com
Now I will explain one thing to get the most out of your kernel.
On the route system / etc / init.d 99Dark_Tweaks find a file called.
I explain what it all means what it says.
echo "100"> / sys / class / misc / liveoc / mpu_ocvalue
This line is to change the frequencies (Live OC) is that if you change the value 100 to 110, all frequencies increased to more 10%.
Example:
Value:--------------100--------------110
Frequency:-----200MHz--------220MHz
Value:--------------100--------------110
Frequency:-----400MHz--------440MHz
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
echo "1"> / sys / class / misc / fsynccontrol / fsync_enabled
This line active (1) or off (0) the FSYNC. Off gives better performance in bench but having an error or restart does not save the error logs, enabled otherwise.
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
echo "0"> / sys / class / misc / SoundControl / highperf_enabled
echo "0"> / sys / class / misc / SoundControl / volume_boost
These lines are used to modify the audio quality (highperf_enabled "1" to enable) and the volume of this (volume_boost a value from 0 to 3)
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
echo "200000"> / sys/devices/system/cpu/cpu0/cpufreq/screen_off_max_freq
echo "200000"> / sys/devices/system/cpu/cpu1/cpufreq/screen_off_max_freq
These lines correspond to the frequency when the screen is turned off (both should be equal)
Example:
echo "100000"> / sys/devices/system/cpu/cpu0/cpufreq/screen_off_max_freq
echo "100000"> / sys/devices/system/cpu/cpu1/cpufreq/screen_off_max_freq
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Save and reboot every time you start your phone what you have changed.
And you will have everything fondled leave this kernel.
Enjoy and reportad for improvement.
INFO Our kernel released openly (Developers Only): Kernel Github DarkRoom
Click to expand...
Click to collapse
If you like our work, you can invite a few beers
rom looks great and the list of features is good ill flash and post how the rom feels
Amazing Work from amazing team as always
Looking forward to try it
sent from my lg-p920 powered with xbsall's finest work
Good job guys. :thumbup:
Send from my XBSA ICS V7.2 P920.
Thanks and enjoy.
---------- Post added at 11:25 PM ---------- Previous post was at 10:53 PM ----------
xbsall said:
Good job guys. :thumbup:
Send from my XBSA ICS V7.2 P920.
Click to expand...
Click to collapse
thanks xbsall
Will there be a version of this with out the larger partitions? Thank you devs for all your great work!
Sent from my LG-P920 using xda app-developers app
Might just be me but download says its only 73bytes large
Sent from my LG-P925 using xda premium
the ManaWhoney said:
Might just be me but download says its only 73bytes large
Sent from my LG-P925 using xda premium
Click to expand...
Click to collapse
its a text file
Good job Guys. :good:
Thank you all for your support
xafalo said:
New International V3 of Team Darkroom, the wait was worth it. Again, we have done a great job Team, the sensations we have are excellent.
INTERNATIONAL V3 XXL ONLY IF HAVE PARTITIONS BIG EUROPEAN ICS BY XBSALL
CHANGELOG
-Base Ics EURO V28B
-System partitions to 1'54gb (Thanks to Xbsall)
-Deoxeada and Zipaling
-kernel Darkroom
-Optimized startup
-Improvements in battery consumption
-Better use of RAM
-New governors Cpu
-Improved Reading Sd
-Improved sensitivity of screen
-Improved data rate, 3G, Wifi
-Battery percentage 1%
-Sounds JB 4.2.2
-Sound notification exclusive Darkroom
-Original Keyboard LG
-Original Keyboard Sony Xperia Z
-Shutdownanimation and Bootanimation Darkroom
-ES Explorer
-Voltage Control
-Tesla Led
-QrDroid
-Quick Boot
-WhatsApp
-Dolphin Browser
-Flash Player
-LgHome Launcher 3.0
-Atom Launcher
-Pie Control
-Wallpapers Darkroom
-The official Team Darkroom Apk
Ramdisk characteristics:
-Added support for init.d
-Adjusted Taskiller
-Removed on interactive startup (Start hotplugx default)
-SWAP to ZRAM changed much faster.
Kernel Characteristics:
-Updated version of the Linux kernel 3.0.21 to 3.0.23.
-Added support for ZRAM.
-Lowering the speed of the GPU for stability.
-Replaced hotplug by hotplugx. (Thanks to imoseyon).
-Improved compression of the kernel.
-Added LiveOC v2. (Thanks to Ezekeel)
-Added ZEN and ROW schedulers. (ROW Snatch default scheduler)
-Underclock GPU for greater stability and less consumption. (157.6 MHz, 307-404MHz 2MHz)
-New set of frequencies.
-UNDERVOLT at some frequencies.
-Changed to "Voltage Control v1". (You will be able to touch the voltage of any of the frequencies, so I can have s as often you want to increase the voltage or down if your phone supports it or for less consumption)
-Improved stability at high frequencies.
-Added Fsync Dynamic.
-Added Sound Control v1. (Thanks to Ezekeel)
-On ARCH Power
-Off Fair Sleepers
-Tweak Ondemand governor.
And other things that I have left out
ROM DONWLOAD LINK
SOURCE:www.thedarkroomteam.com
Click to expand...
Click to collapse
>2013
>Uploading to mega.co.nz, not a site where you can download mobile
Please bro, don't.
Sent from my LG-P920 using xda app-developers app
It would be cool but you haven't linked us to the XBSA Partition as I'm beyond lost trying to find with your misleading thread.
I installed once and was confronted with the frightening and unpleasant bricking of my phone, in which I fixed myself with a .bin ROM.
My current status with your work remains specifically undecided as I can't view it unless your willing to help a noob follow through on doing something that is simple in your eyes but not as easy in others.
May I ask, am I supposed to install a certain ROM for XBSA and stack your ROM on top? I'm a bit mischievous on where this is supposed to lead me and would like to understand if you could provide further direction and be a bit more clear on how to install a certain ROM.
Another small piece of feedback in a manner I would try and oppose to as kind as possible.
Why mega.co.nz?
Not everyone has the bandwidth to pull a download from there as it requires some massive speeds.
Still, thanks.
Feedback will be appreciated and if you could kindly provide a link to this "partition" in which I've not yet to find I'd be grateful.
Sorry if I come off as rude, I don't mean to and mean no harm.
Sharings said:
It would be cool but you haven't linked us to the XBSA Partition as I'm beyond lost trying to find with your misleading thread.
I installed once and was confronted with the frightening and unpleasant bricking of my phone, in which I fixed myself with a .bin ROM.
My current status with your work remains specifically undecided as I can't view it unless your willing to help a noob follow through on doing something that is simple in your eyes but not as easy in others.
May I ask, am I supposed to install a certain ROM for XBSA and stack your ROM on top? I'm a bit mischievous on where this is supposed to lead me and would like to understand if you could provide further direction and be a bit more clear on how to install a certain ROM.
Another small piece of feedback in a manner I would try and oppose to as kind as possible.
Why mega.co.nz?
Not everyone has the bandwidth to pull a download from there as it requires some massive speeds.
Still, thanks.
Feedback will be appreciated and if you could kindly provide a link to this "partition" in which I've not yet to find I'd be grateful.
Sorry if I come off as rude, I don't mean to and mean no harm.
Click to expand...
Click to collapse
My friend , you don't rant to the developers , you ask for help. Also acknowledging that they don't have to help you at all , would have spared you from writing that lengthy post.
The work they do is voluntary and nonprofit.
If you can't run it , that's your problem because I'm able to run it with no problems. You can ask for help in the general section , then I'll gladly help you.
China , offered American POWs Cigarettes , Hot meals and a good place to sleep , in hopes of making them talk. Guess what? Most of them did. It wouldn't hurt if you tried that for a change.
Sent from my LG-P920 using xda premium
Sharings said:
It would be cool but you haven't linked us to the XBSA Partition as I'm beyond lost trying to find with your misleading thread.
I installed once and was confronted with the frightening and unpleasant bricking of my phone, in which I fixed myself with a .bin ROM....blah blah blah.
Click to expand...
Click to collapse
You can find the XBSA large bin at the XBSA V7.2 ROM thread.
Your Post is misleading and will probably confuse other users.
The large partition is just a BIN file that you flash the same way you flashed any other STOCK LG BIN ROM because its a STOCK V28B ICS LG BIN with modified LARGER partitions and ROOT.
So you have the same possibilities of bricking your phone that you will have with a normal ICS BIN flashing.
Apart form that P920 is unbrickable unless it has hardware damage.
Nothing to brick and nothing to lose.
p.s xafalo take the link for the large partitions bin modification and instructions from my thread and put it in your thread too if you want too
I can't understnad people about Large version - they don't read carefully,what is the difference..I explane same in Bulgarian forum for Android ))
alphatia said:
Amazing Work from amazing team as always
Looking forward to try it
sent from my lg-p920 powered with xbsall's finest work
Click to expand...
Click to collapse
xbsall said:
Good job guys. :thumbup:
Send from my XBSA ICS V7.2 P920.
Click to expand...
Click to collapse
OptimusRs said:
Good job Guys. :good:
Click to expand...
Click to collapse
Thank you all.
Enviado desde mi Darkroom International V3 XXL usando Tapatalk 2
10x to the TEAM !!!
Super work !
boltthrower56 said:
My friend , you don't rant to the developers , you ask for help. Also acknowledging that they don't have to help you at all , would have spared you from writing that lengthy post.
The work they do is voluntary and nonprofit.
If you can't run it , that's your problem because I'm able to run it with no problems. You can ask for help in the general section , then I'll gladly help you.
China , offered American POWs Cigarettes , Hot meals and a good place to sleep , in hopes of making them talk. Guess what? Most of them did. It wouldn't hurt if you tried that for a change.
Sent from my LG-P920 using xda premium
Click to expand...
Click to collapse
Choose to help, not disrespect.
Sent from my LG-P920 using xda app-developers app
please, respect
thanks
GuerillaROM for Asus Padfone 2
If you found yourself here I suspect you own a Asus Padfone 2 ? If not.
This is not the thread for you ! This thread contains a customized ROM for the Asus Padfone 2 and none else !
So don't try this on any other device then the Asus Padfone 2 !
Please spend some time reading this thread before flashing. Since the possibility of bricking your Padfone 2 is always there.
Me or XDA will not be responsible if your device bricks, explodes, melt's down or anything else bad! IF you understand these then let's begin...
So this is my very first ever made custom ROM made for Asus Padfone 2. This has been made out of the latest
Asus firmware ( WWE 10.4.17.7 - 4.1.1, see more info from changelog! ) and with the help of XDA community. So remember to hit thank's for everyone helping me make this ROM for you !
Click to expand...
Click to collapse
Guerilla ROM Features ?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
AROMA Installer!
Crontabs/Cronsupport
Debloated
Stone Kernel OC or Stock Kernel
Sysro/Sysrw
Deodexed
Zipaligned
Rooted
Busybox included
Init.d included
Gps.conf
Click to expand...
Click to collapse
HOW TO FLASH ?
PLEASE DO A BACKUP BEFORE TRYING TO FLASH THIS ROM!
PLEASE NOTE THAT YOU MUST BE USING CWM NEWER THEN 6.0.2.9!
DIRTY FLASH
Code:
*Put GuerillaROM.zip to /sdcard
*Reboot recovery
*Install GuerillaROM.zip from /sdcard
*Reboot & Let it sit for a while
*Reboot once again & enjoy !
FULL WIPE TWRP / CWM
**WARNING THIS DOESN'T ALWAYS WORK**
Code:
*Put GuerillaROM.zip to /sdcard
*Reboot recovery
*Factory reset (does a wipe to /data and /cache but not /data/media = sdcard!)
*Install GuerillaROM.zip from /sdcard
*Reboot & Let it sit for a while
*Reboot once again & enjoy !
Stuck at white Asus Logo ? Check the FAQ(2nd post) section for help!
Click to expand...
Click to collapse
**FULL FEATURE LIST**
Slimmed ROM!
AROMA INSTALLER
KERNELS: Stock & Stone kernel OC
BOOTANIMATIONS: Asus Stock & Custom No-circle
APPS: ES Filemanager, Stock Filemanager,
Titanium, Terminal, Viper4Android,
DSP Manager, AC!D SoundMOD,
Photosphere camera, Sonymotion Camera,
MX Player, Google Play Music,
Gmail, Stock E-Mail,
Livewallpapers, Asus Taskmanager,
Asus Weather & Time, Asus Battery Widget,
Digital Clock, Genie Widget, Chrome,
Stock Browser, Nova Launcher,
Apex Launcher, Adobe Flash Player,
Adobe Reader, Padfone Launcher Switcher,
Hangouts, Whatsapp, Skype, Greenify,
AdAway, Dropbox, Xposed Framework...
And ALOT MORE STOCK APPS TO BE CHOSEN!
MODS: Guerilla Tweaks by SiSSiDroid only for GuerillaROM !
Operation Killjoy by Exit_Only
Fly-ON MOD by slaid480
Click to expand...
Click to collapse
Click to expand...
Click to collapse
**CHANGELOG**
Code:
1.6
Fixed Dynamic Display not working
Added Keyboards to AROMA: AOSP (Stock Keyboard by default!)
Cleaned build.prop
Adjusted alot of Guerilla Tweaks values: alot more battery friendly !
Updated Zhuhang's free .irs files for viper4android
Hopefully fixed alarm clock issues
Disable Asus specific logs, no more asus_log's filling the /data/media !
1.5
[B]Slimmed the ROM totally!
AROMA INSTALLER[/B]
[B]KERNELS[/B]: Stock & Stone kernel OC
[B]BOOTANIMATIONS[/B]: Asus Stock & Custom No-circle
[B]APPS[/B]: ES Filemanager, Stock Filemanager,
Titanium, Terminal, Viper4Android,
DSP Manager, AC!D SoundMOD,
Photosphere camera, Sonymotion Camera,
MX Player, Google Play Music,
Gmail, Stock E-Mail,
Livewallpapers, Asus Taskmanager,
Asus Weather & Time, Asus Battery Widget,
Digital Clock, Genie Widget, Chrome,
Stock Browser, Nova Launcher,
Apex Launcher, Adobe Flash Player,
Adobe Reader, Padfone Launcher Switcher,
Hangouts, Whatsapp, Skype, Greenify,
AdAway, Dropbox, Xposed Framework...
And [B]ALOT MORE STOCK APPS![/B]
[B]MODS[/B]: Guerilla Tweaks by SiSSiDroid previous 'rambooster' script!
Operation Killjoy by Exit_Only
Fly-ON MOD by slaid480
Updated xBlast to latest
Updated most apps to latest!
Removed: entropy_on, entropy_off
adblock, deblock, logcat_on, logcat_off
Alot of winter cleaning...
1.4 OC & 1.4_STOCK
*updated viper4andoird 2.3.1.3
*re-optimized /system/app & framework-res.apk got more free space !
*removed some "unnecessary" sounds from ringtones, alarms.´
*removed more apps see post 2 for full list !
*added root check for 'entropy_on' and 'entropy_off'
*cleaned and fixed, 'stocktuner' and 'stonetuner'
*re-did 'stonetuner' presets see 2nd post for details
*added 4th preset for 'stonetuner' called "extreme performance"
*re-did 'rambooster'
*added 'autoptimize' option to 'rambooster'
*added 'wifi sleep time' option to 'rambooster' set's how long before wifi sleeps when screen off
*added changeable trigger value for 'autobooster'
*added 'autoptimize' , 'autocleaner' and 'autobooster' enable / disable features to 'rambooster'
*cleaned many scripts
*adjusted io values
*added kernel sleeper disablers for STOCK version
*updated xblast to 1.6.6
*updated es file explorer to 3.0.6
*moved xposed framework, xblast, es file explorer to user apps !
*added Titanium Backup, Terminal Emulator apps !
1.3_OC & 1.3_STOCK
*automatic wipe for cache and dalvik-cache in updater-script
*automatic reboot in updater-script
*fixed xposed permission issues
*cleaned installation progress
*adjusted iotweak values
*updated viper4android 2.3.1.1 - working out of the box with high audio quality
*fixed 'stonetuner'
*automated rambooster fixed will now free more memory !
1.2_OC & 1.2_STOCK
*updated xblast to latest 1.6.2
*updated xposed to latest 2.3.1
*adjusted many values
*moved some init.d script into one script
*moved all scripts into one folder
*added logcat_on & logcat_off binaries
*re-did entropy_on & entropy_off binaries
*viper4android 2.2 working out of the box !
*fixed updater-script
*new bootanimation !
1.1_OC & 1.1_STOCK
*reverted back to Viper4android 2.2... Sound was amazing in 2.3 but keeps screeching from time to time.
*updated Viper4android .irs files to latest !
*updated ES file explorer to latest 3.0.4
*'rambooster' binary got a complete make over
*added 3 options for autobooster (aggressive , moderate and disabled), moderate set as defaut
*autobooster values adjusted
*optimized /system/app
*optimized framework-res.apk
*tweaked some build.prop values
*moved bootboost script to complete script
*added loopysmoothness
*added iotweaks
*removed centerclockmod
*added xblast back - xblast is now working out of the box !
*updated xblast to latest 1.6.1
v1.0 OC & v1.0 STOCK
*fixed 'stonetuner'
*re-wrote all PDI scripts to match Guerilla Tweaks
*fixed 'ondemand' values
*added loopysmoothness
*added google dns
*added camera app 4.2 (Working out of the box, Thx Lidenburg !)
*added gallery 4.2
*removed old gallery2.apk
*new bootanimation !
*removed xblast keeps conflicting with the new mods
*added percentage battery mod by ziiHelmet
*added centerclockmod by ziiHelmet
*fixed xposed permissions for modules.list and modules.whitelist
v0.9 OC & v0.9 STOCK
*made "steps" to updater-script
*added es file explorer
*added xposed framework
*added usefull modules for xposed
*adjusted STOCK kernel values
*fixed 'stocktuner' binary errors
*adjusted OC 'stonetuner' values
*added '1024' and '1136' frequencies to 'stonetuner'
v0.8 OC & v0.8 Stock Kernel
*launched v0.8 with stock kernel = STOCK version uses 'stocktuner' binary
*launched v0.8 with stonekernel OC = OC version uses 'stonetuner' binary
*fixed 'battery life' preset causing random reboots
*fixed cron disperring time after few hours
*Re-did automated rambooster it will now only run IF you have less then 1000mb of RAM left ! Check for logs in /data/guerilla_tweaks/autoboost/autoboost.log!
*many values adjusted for better battery!
*fixed the newly done build.prop tweaks
v0.7.2
*added 3 presets to 'stonetuner' binary: batter life, performance, balanced
*fixed interactivex governor values
*fixed stonesaver governor values
*fixed 'BBS' not being able to get cpustates after using 'stonetuner'
*added recron script for hourly recron
*build.prop tweaks re-done.
*removed Pureaudio v1
*added V4A FX
*fixed io tweak values
v0.7.1
*fixed hourly ramboost
*fixed daily cleaner
*fixed stonetuner frequency errors
v0.7
*updated Stone Kernel OC 0.9
*updated firmware to WWE 10.4.7.17
*added crontabs/cronsupport
*added rambooster to run every hour
*added autocleaner.sh to run once a day
*moved direct_injection logs to /data/guerilla_tweaks
*added stonetuner for easy CPU tuning !
*enabled entropy by default
**REMOVED APPS**
Asus Pad Tutorial
Zinio Reader
Press Reader
MyNet
Pinpal
MyBitcast
BuddyBuzz
Magnifier Tutorial
Facebook Poster
Kindle
Watch Calender
Asus Studio
Asus Story
Dictionary
PlusOne
MyDictionary
GenieWidget
GoogleTTS
GoogleFeedback
CMclient
Chrome
v0.6
*started from scratch with Lidenburg 10.4.16.18 ROM pre-rooted, deodexed, partially-debloated
*added Stone Kernel OC 0.8
*added Pureaudio v1
*added PDI 3.2.4
*added 09io tweak from PDI 3.2.5-t1
*removed PDI cputuner
*removed directinject script
*debloated more
*added sysro/sysrw scripts (check [B]2nd[/B] post how to use)
*added build.prop tweaks
*added adblock/deblock scripts (check [B]2nd[/B] post how to use)
*tweaks loggers at /data/guerilla_tweaks & /data/direct_inject
*default governor switched from "interactivex" to "ondemand"
*cpu max freq set to 1728mhz
*added governor tweaks
*more init.d tweaks
v0.5.8
*updated PDI to official realease of 1.1.5
*guerilla_governor tweak permissions fixed
v0.5.7
*PDI dnsmasq script fixed
*PDI gps.conf added, can't be removed !
*guerilla tweaks fixed. Now they really work !
v0.5.6
*more apps removed
*file manager.apk back
*updated PDI 1.1.5
*re-done all guerilla_tweaks
v0.5.5
*removed bash
*removed more apps
*updated PDI 1.1.3
*added logs for guerilla_tweaks to /data/guerilla_tweaks
*fixed guerilla_governor_tweaks interactivex is now default governor
*max freq set to 1728mhz for interacivex, ondemand, interactive governors
*min freq set to 192mhz for interacivex, ondemand, interactive governors
*fixed autoboost
*fixed guerilla_tweaks
v0.5.3
*updated PDI to 1.1.2r1
*added guerilla_tweaks
*added guerilla_governor_tweaks
*added guerilla_autoboost
*added PDI gps.conf
*fixed PDI logs
v0.5.1*HOTFIX
*fixed mobile data not working
*added loopy smoothness ( for test purpose, please give feedback! )
*removed asus story.apk & asus studio.apk
v0.5
*updated firmware to 10.4.16.8
*updated NOS to Project Direct Injection 1.0.2
*added sysctl.conf
*added bash
*added sysro/sysrw
*added adblock
*added Stone Kernel 0.7 OC
v0.3
*updated NOS scripts 100% 5.3
*centerclockmod
*batterymod
*build.prop tweaks
v0.2 Initial Version
*NOS scripts 100% 5.2
*init.d support
Click to expand...
Click to collapse
BIG THANKS TO ALL THOSE WHO HAVE HELPED ME MAKE THIS ROM!
Exit_Only for Operation Killjoy !
Slaid480 for Fly-On MOD ! !
GuneetAtwal for making this awesome guide for making your own custom ROM!
Lindsaytheflint for making the Stone Kernel!
zhuhang & ViPER520 for superb audio of ViPER4Android!
rovo89 for Xposed Framework!
FemBlack for xBlast Module!
Amarullz for AROMA Installer!
Ayush Singh for this awesome guide for AROMA Installer!
Cyberfant for keeping up the download link for me !
BSDgeek_Jake for mother of all adblocks !
Lpy for loopysmoothness !
Lidenburg
georgek_gr
Sorcerer86pt
Explorer23
ziiHelmet
wwatu
idcrisis
AND EVERYONE WHO I FORGOT!
DONATIONS RECEIVED:
jonklinger
Thank you all for your support and the coffee !
Click to expand...
Click to collapse
DOWNLOAD LINK FOR GuerillaROM-v1.6!
Guerilla Download site hosted by Cyberfant !
md5sum:cf8cc9aa19d45c9142a249065a25bb10
KNOWN BUGS?
Code:
AROMA Installer: Installer freeze's sometimes. Just do adb reboot recovery and try again or restore backup, reboot and try again !
Stone Kernel: AC Charging doesn't work and FM Radio doesn't work.
Please report if you find more!
More features will be added for this ROM as I can make them... Ideas are welcome... Feedback is appreciated !
And please be aware that you are doing all of this at YOUR OWN RISK!
Click to expand...
Click to collapse
PLEASE HIT THANKS IF YOU ENJOYED THIS ROM AND TO KEEP ME MOTIVATED!
FAQ:
Q: Flash stuck at white Asus Logo, what to do ?
A: For some reason it won't flash properly always, so you have to go back to stock rom, root, flash custom recovery and flash GuerillaROM again.
How-To?
!WARNING! THERE MIGHT BE OTHER METHODS TOO. THIS IS JUST HOW I DO IT!IM NOT RESPONSIBLE FOR BRICKS OR EXPLOSIONS NOR IS XDA! !WARNING!
THIS IS MY HOW-TO FLASH STOCK ROM, ROOT, FLASH CUSTOM RECOVERY AND FLASH GUERILLA ROM
*adb reboot bootloader
*fastboot flash recovery "stock-recovery-name".img
*fastboot erase cache
*fastboot boot "stock-recovery-name".img
*now go to wipe data / factory reset
NOTE: MY PADFONE'S adb push doesn't work in stock recovery so I have to optionally flash cwm or twrp to push and continue... Skip this if your device's adb work on stock recovery !
*adb reboot bootloader
*fastboot flash recovery "custom-recovery-name".img
*fastboot erase cache
*fastboot boot "custom-recovery-name".img*adb push "stock-rom-name-here".zip /cache
OPTIONALLY:
*adb reboot bootloader
*fastboot flash recovery "stock-recovery-name".img
*fastboot boot "stock-recovery-name".img*now navigate to "apply update from cache"
*wait for it to finish
*reboot
*enable usb debugging
*adb reboot bootloader
*run r1 superboot - one click root by PaulOBrien
*adb reboot bootloader
*fastboot flash recovery "custom-recovery-name".img
*fastboot erase cache
*fastboot boot "custom-recovery-name".img
*reboot system now - disable recovery flash ! - YES
*copy latest GuerillaROM to /sdcard
*adb reboot recovery
*do backup...
*wipe data / factory reset
*wipe dalvik cache
*apply update from sdcard
*navigate to GuerillaROM and continue to flash
*wipe cache / dalvik cache
*reboot and your finally done!
NOTE: It will take time to build new system from scratch so please be patient if it stucks at the white asus logo ! Give it atleast 5-10min !
Q: What is 'stonetuner', 'stocktuner' and what's it for ?
Q: It's used to max battery on your Kernel! You can choose almost everything yourself ! Governor's, Scheduler's, Max and Min frequencies ! These persists trough reboot !
How-To ?
First you need terminal emulator.
IF YOUR USING OC VERSION:
Code:
su "enter"
"stonetuner"
IF YOUR USING STOCK VERSION:
Code:
su "enter"
"stocktuner"
And follow the instructions !
Most cpu related tweaks have been disabled by default but by running 'stonetuner' you enable them !
PRESETS 'STONETUNER':
Battery Life:
Governor: Stonesaver
Scheduler: Sio
Min / Max Frequencies: 192 - 1350mhz
Balanced:
Governor: Wheatley
Scheduler: Sio
Min / Max Frequencies: 192 - 1350mhz
Performance:
Governor: InteractiveX
Scheduler: Sio
Min / Max Frequencies: 162 - 1512mhz
Extreme Performance:
Governor: Performance
Scheduler: Sio
Min / Max Frequencies: 192 - 1728mhz
Click to expand...
Click to collapse
Q: What is and how to use 'rambooster' ?
A: 'rambooster' is a script I made containing tweak settings for automated rambooster, automated cleaner, automated optimizer, adb over wifi, optmizing, quick ramboost and more! To use it 'rambooster' you need to install terminal emulator app or run it via 'adb shell'
Code:
su "enter"
rambooster "enter"
This will open you inside the tweak settings where you can adjust, wifi sleep time, automated rambooster trigger value, enable / disable most of the tweaks.
AUTOMATED RAMBOOSTER:
Will run every hour at 15min past. Default trigger value set to 600mb, IF free memory less then 600mb drop caches = more free RAM
AUTOMATED CLEANER:
Will run every day at 6:05.
AUTOMATED OPTIMIZER
Will run every day at 6:01.
Click to expand...
Click to collapse
This is good day to padfone 2 owners!
Thanks I will try soon as possible
Edit: we need run the scripts at the first time or they run automatically in first boot?
Sent from my PadFone 2 using xda app-developers app
This weekend the install week!! XD
Thanks for the great job of creating a new ROM!
Regards
PD: install the Rom, no wipes?
[zozi] said:
Thanks I will try soon as possible
Edit: we need run the scripts at the first time or they run automatically in first boot?
Sent from my PadFone 2 using xda app-developers app
Click to expand...
Click to collapse
Thanks to the Init.d support you shouldn't need to if everything is working correctly. You can check /data/nos_injection/4cylturbo/engine. Theres the log files for turbonos so you should see problems there if something is not working correctly !
Hopefully this helped you !
DjBastard said:
This weekend the install week!! XD
Thanks for the great job of creating a new ROM!
Regards
PD: install the Rom, no wipes?
Click to expand...
Click to collapse
No need to but it is recommended ! Just flash zip, wipe cache / dalvik cache , reboot and enjoy ! And ofcurse like always... Do a nandroid backup before flashing this ROM.
We can update the nos when are new versions or is better wait updates from you?
I hope updates from you to get better and better roms...
Sent from my PadFone 2 using xda app-developers app
[zozi] said:
We can update the nos when are new versions or is better wait updates from you?
I hope updates from you to get better and better roms...
Sent from my PadFone 2 using xda app-developers app
Click to expand...
Click to collapse
Please wait for my update. Already working on it hopefully il get it up tomorrow.
Sent from my PadFone 2 using XDA Premium HD app
And you will surprise with something new?
Ok I will wait, this weekend I want flash your room, I will do full wipe...
Sent from my PadFone 2 using xda app-developers app
I have so many ideas but too little skills. I would really like to hear your ideas what you would like to have.
Sent from my PadFone 2 using XDA Premium HD app
I have some ideas too but no skills too... Like advanced power menu it's one of them...
Sent from my PadFone 2 using xda app-developers app
Hello!
It would be nice to implement some mod to increase the quality and volume for padfone
And for the screen, know the Bravia mod? (luxury is XD)
The work is slow, but it is getting looooong!
Thanks to the small community we have
Regards
DjBastard said:
Hello!
It would be nice to implement some mod to increase the quality and volume for padfone
And for the screen, know the Bravia mod? (luxury is XD)
The work is slow, but it is getting looooong!
Thanks to the small community we have
Regards
Click to expand...
Click to collapse
Thank you for you kind words !
Indeed the work is slow but im working all sorts of stuff. For now I've added some build.prop tweaks for image quality, 3g tweaks, internet tweaks and raised the call volume steps from 5 to 14. Testing out some more init.d scripts. And actually thanks to ziiHelmet we will get some minor mods
Great work!
SiSSiDroid said:
Thank you for you kind words !
Indeed the work is slow but im working all sorts of stuff. For now I've added some build.prop tweaks for image quality, 3g tweaks, internet tweaks and raised the call volume steps from 5 to 14. Testing out some more init.d scripts. And actually thanks to ziiHelmet we will get some minor mods
Click to expand...
Click to collapse
Thanks for your awesome work.
Looking good on my Padfone 2 - however Google voice search stops working if you upgrade in Play Store (not sure if this is Rom related)
Having a few Bluetooth disconnection problems too which didn't have with standard rom.
I have modified the contacts provider.apk to enable Facebook contact syncing if you would like to include in your rom?
Thanks again
Wanted feature
Any chance with killing an app by long pressing "back key"?
I know the improvement and features addition is quite a long list and I am in 100% appreciation of your efforts but this is a very commonly used mod and probably simple to integrate.
Going to install and try the ROM now
Cheers
droidace said:
Any chance with killing an app by long pressing "back key"?
I know the improvement and features addition is quite a long list and I am in 100% appreciation of your efforts but this is a very commonly used mod and probably simple to integrate.
Going to install and try the ROM now
Cheers
Click to expand...
Click to collapse
Hopefully you didn't flash already since im uloading 0.3 right now.
Thanks... Today I have to flash... Any flavor of changelog?
Sent from my PadFone 2 using xda app-developers app
[zozi] said:
Thanks... Today I have to flash... Any flavor of changelog?
Sent from my PadFone 2 using xda app-developers app
Click to expand...
Click to collapse
Yea soon as I get that daem dropbox working ! Gotta search for a better one and as I update the OP it's ready for flashing and il add changelog
Thy abelha.pt if the site are in English for you
Sent from my PadFone 2 using xda app-developers app
OP Updated... Finally sorry for the delay.
Suggest everyone get's terminal emulator or smanager to use nos scripts.