Base: CM10 JellyBean
Kernel: Nibbles v0.1.3
Installer: Aroma
Source Sync & Build Date: 1.05.13
Release Date: 1.05.13
Release Version: v1.6
Packed full of yummy goodness, stability and speed, this ROM is intended to be a daily driver. This is not a test, experiment or buggy piece of nonsense. I started with CM10 Jellybean and added numerous enhancements to improve speed, stability and battery life. Installation is a breeze with Aroma, choose which options and applications you want to have - or run it again to install any apps you may have missed (without having to re-flash the ROM).
Please read the first three posts completely, then read them again before you flash this for the first time. Any notable bugs are located in the post below. If you experience any issues that have not been reported already, please post to the thread. Thanks!
Click to expand...
Click to collapse
Installation Made Easy:Just download the zip and flash it. The Aroma installer will guide you through a multitude of options, including different launchers, application choices and system options. If you prefer a no fuss installation, there's even an option for a pre-configured base installation. Lastly, if you decide to install any apps you previously chose not to, simply flash the zip and choose the application installer option.
Click to expand...
Click to collapse
Included Applications:Google Apps 4.1, ROM Manager, Root File Explorer, Accuweather, DSP Manager with BEATS Audio, Goo.im and more! The ROM also includes the new UCLK4 radio as an optional installation.
Under the hood are numerous script tweaks, system tweaks and enhancements to balance performance, stability and usability.
Click to expand...
Click to collapse
Nibbles Kernel:Up to and including Nibbles v1.4-S, I've been including the TFQ-LZ kernel by thomas.raines. Starting with Nibbles v1.5-S, there is an entirely new kernel dedicated to powering the Nibbles ROM. The Nibbles kernel includes a LOT of new features that cater to all users who want to get the most out of their device. I've included many popular CPU Governors and I/O schedulers to support a wide variety of uses. Additionally, I've made lots of other fundamental changes to the kernel to better balance battery and performance (well beyond what you can do with a handful of scripts) as well as implementing over clocking the CPU to 1.782GHz, Under/Over Volting the CPU at each frequency step and over clocking the GPU.
CPU Governors: intellidemand, pegasusq, gallimaurfy, interactivex, smartassv2, wheatley, interactive, conservative, userspace, ondemand, performance
I/O Schedulers: noop, deadline, cfq, sio, vr, bfq
There are two flavors of the Kernel available now. One with stock GPU clock speeds and the other with a slightly overclocked GPU. Check the download section below.
Click to expand...
Click to collapse
Thanks and credits!
DAGr8
thomas.raines
sk8erwitskil
CyanogenMod TEAM
Team Chopsticks
TEAM ROOK
jee'sgalaxy
BMP7777
m4570d0n
StolenVW
gs2user
ruben00
rkub - super beta tester
rpr69
iBotPeaches
NGen
mohan_kr
amarullz
Probably others that I missed, just PM me!
Special Thanks:
Cold brews in my fridge.
My sincerest thanks to those who have donated:
treadlightly
harry_fine
mcmasterp
Locoman_
yogi-4
Wallcrawler77
My Wife
Your Girlfriend
Red Bull®
Guinness®
Thanks to everyone else for over 6,500 downloads since I started!
Ok, so I think it's important to make sure you guys go hit Thanks! on each of the people noted above next time you see them in a thread.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Disclaimer: This rom will not prevent a zombie apacalypse. It may however, aid you in the event of an apacalypse by providing stability, battery and smooth cellular operation. By flashing this, your phone should still work ... and as an added bonus, it'll likely work better than your stock rom. If your phone bricks, build a house. By flashing this rom, you agree to have your phone powered by beer and tiny nibbles.
Installation Instructions:
Use Sk8rs CWM 6.0.1.5 for best results.
(Get it here)
Do not flash a ROM or Radio with your phone plugged into USB.
Nandroid your current ROM
Flash the zip from recovery
Aroma installer start and guilde you through the process.
Aroma will also take care of wiping data and caches as needed, so you don't have to do this on your own.
Boot it up
Setup your google account if you installed google apps
Let your google apps sync from play store (if applicable)
Allow installed apps to update from play store (if applicable)
Fix permissions
Reboot
Click to expand...
Click to collapse
Aroma Installer Preview Images
***DOWNLOAD NIBBLES v1.6 HERE!***
Download: http://tinyw.in/0pkg
MD5: fc14733485fcaab2bbd6562790c04953
Click to expand...
Click to collapse
Nibbles 1.5-S CAMERA FIX
Only necessary to install if you have experience the "Cannot connect to camera" error with 1.5-S.
Instructions:
Wipe Gallery/Camera Data & Cache
Remove Gallery/Camera via TiBu
Flash the zip
Reboot
Let apps optimize (I wipe dalvik as part of the fix)
Run fix permissions in ROM Manager
Reboot
Download: http://tinyw.in/lpda
MD5: ad676dd03ef411f649e68091bcffe127
Click to expand...
Click to collapse
***DOWNLOAD Nibbles Kernel v0.1.3 HERE!***
Nibbles 1.6 includes stock and Nibbles versions of the kernel as part of the installer. The downloads below are for anyone who wants to use the kernel on any other AOSP JB rom (kernel will not work on TW ROMs).
Both downloads include all of the kernel features mentioned in the OP. The differences between these two is only the GPU speed. You can download and flash either of these at any time without wiping your system. Note that the installation will wipe your cache and dalvik, so after you reboot, let the apps setup and settle for a few minutes.
Stock GPU Speeds (3D @ 266MHz / 2D @ 200MHz): http://tinyw.in/JOmM
MD5: 4dbdfc9322a7f27db97b32a8bb1cc0c4
GPU Clock Moderate (3D @ 300MHz / 2D @ 228MHz): http://tinyw.in/Answ
MD5: 7a4e8793e9ce1838185d3dd4c07c8af6
Nibbles GPU Speeds (3D @ 320MHz / 2D @ 228MHz): http://tinyw.in/ULPG
MD5: 25e2e0a436e402ee305e18e051c21245
Source Code: https://github.com/carvsdriver
Click to expand...
Click to collapse
Nibbles Icons
(Download Removed - Swapping out settings can be done via the Aroma installer)
Click to expand...
Click to collapse
***Instagram Fix***
The instagram fix included in Nibbles 1.6 is from jee'sgalaxy's post HERE. There are five build.prop values that are edited (Nibbles only required two of them). If you do not use instagram, you can reset these values in build.prop to the following:
debug.composition.type=dyn
debug.mdpcomp.maxlayer=3
dev.pm.gpu_samplingrate = 1 (delete this one)
debug.sf.hw = 1 (this stays the same)
debug.egl.hw = 1 (this stays the same)
( disable dithering as noted in the thread wasn't necessary for the fix )
I included this by default in the ROM because I figured most people use instagram. Either way, if you don't use it, just swap these values back if you want to. Changing them back to stock isn't required unless you notice issues with video related to memory collisions.
Make sure you use a build.prop editor to make the changes, backup your original version and reboot when you are done.
Click to expand...
Click to collapse
***Settings Recommendations***
Below are some settings that I use on this ROM for best performance and battery.
CPU Governor: ondemand
Scheduler: CFQ
Settings->Developer Options: On
Settings->Developer Options->Window animation scale: 1x
Settings->Developer Options->Animation duration scale: .5x
Settings->Developer Options->Transition animation scale: .5x
Settings->Developer Options->Force GPU rendering: On
Apex Launcher->Advanced->Keep in memory: On
Settings->Wi-Fi->Advanced->Keep Wi-Fi on during sleep: Always
Settings->Wi-Fi->Advanced->Avoid Poor Connections: On
Settings->Wi-Fi->Advanced->Notify open network: Off
Click to expand...
Click to collapse
Known Bugs:
Bluetooth may crash the first time you open it. Just relaunch and it should be fine. I don't have a means to test bluetooth, if someone wants to offer up a fix, PM me.
Things of note:
Double check your APN settings after flashing to make sure you're on LTE and it's all correct.
First boot will be slow, have patience. It may take a couple minutes. Subsequent reboots should fly.
If you set your CPU to 196MHz, you will notice some lag when waking up the phone. This is particularly true if you have a live wallpaper.
After first boot, hit the volume rocker to wake up the sound. (This should no longer be an issue)
I no longer support the battery mods from my other thread, while they will work on this ROM they might do something funky. Use at your own risk.
Team Rookie Projects:
http://forum.xda-developers.com/showthread.php?t=1798056
Change Log Information:
There are two places where I publish change information. In the post below and in changelog.txt on Goo.im in each ROM directory. Make sure to read the changelog information before you download and install the ROM. In most cases, the minor version updates simple incorporate patches that have been accumulated since the prior release. If you have installed all applicable patches, you likely won't need to download and install the full ROM.
How to read my version numbers:
I keep them pretty simple to be honest, the first number is a major release. This probably won't change until I move to CM10.1 when it is read. The second number is a compiled release, meaning that I recompiled the source to include significant fixes or updates - you will always need to do a full ROM flash when these are released. The third number is a minor release, as noted above it typically only includes accumulated patches since the last compiled or minor release.
Click to expand...
Click to collapse
v1.6 Change Log:
1/5/13: Reverted base to Jellybean CM10 branch
1/5/13: Fixed Instagram photo flickering
1/5/13: Aroma updates
1/5/13: Camera seems to be working fine now.
1/5/13: GPU clocks set to [email protected] [email protected] (stock speeds are optional at time of installation)
v1.5-S Change Log:
12/21: Nibbles kernel added! Will have two options during ROM installation for GPU settings differences
12/21: Toolchain updates
12/21: Minor code updates and fixes
12/21: Removed No-frills CPU control - system CPU settings has been fixed!
12/21: Added IncrediControl app for managing voltages
12/21: Updated installer to allow for clock mod changes as part of app only install
v1.4-S Change Log:
12/13: TFQ Kernel built from latest source (including 12/12 fixes)
12/13: Cherry picked various new commits from git (Cyanogenmod)
12/13: Removed Flash (it's useless anyway)
12/13: Removed Google App Suite 4.2
12/13: Added Google Apps 4.1 (Play, Music, Search, Now)
12/13: Removed 4.2 camera
12/13: Some minor app updates
12/13: Re-adding ROM Manager
12/13: Faster boot time
12/13: UCLK4 radio (optional) from mohan_kr
*This turned into a bigger update than I anticipated, but it sets things up nicely for the new kernel I have in the works.
Complete change history can be found in changelog.txt on Goo.im. I removed the history from this post to clean things up a bit. This post will only have the last two version changes posted.
FIRST!
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Awesome to have all the multiple ROM options to flash lately. Thanks!
I wanna try this so bad! Why wont you download faster!?
Been using your .2 & .3 roms this week and gotta say good work cvd!! Went back to SkyJB to give the new base and update a try cuz I thought it might be a little bit longer for your release but will be giving this a shot tonight or tomorrow depending on how much I drink today...lol It really is great to have all the choices of roms that are working so well...
rkub said:
Been using your .2 & .3 roms this week and gotta say good work cvd!! Went back to SkyJB to give the new base and update a try cuz I thought it might be a little bit longer for your release but will be giving this a shot tonight or tomorrow depending on how much I drink today...lol It really is great to have all the choices of roms that are working so well...
Click to expand...
Click to collapse
Sounds legit. Thanks for helping me test everything out. I've been running this all day, beating up my phone and battery life and performance have been superb on the Wheatley governor. I plugged in twice to do som ADB stuff, so when I restart from a full charge I'll post up some full results with scren shots.
Great work and thanks again, not only for the bootani(still working on a hybrid) but for the tips on the kernel(thanks to m45 too)!
BMP7777 said:
Great work and thanks again, not only for the bootani(still working on a hybrid) but for the tips on the kernel(thanks to m45 too)!
Click to expand...
Click to collapse
If you need help on the ani, shoot me a PM. We're just running around getting ready for the hurricane so I should have some time tonight to fiddle with it if you want. Better hurry though, because we might be dead and flooded by Monday :laugh:
Aw yea!
Sent from my SAMSUNG-SGH-I727 using xda premium
What scheduler do you recommend? I'm gonna use Wheatley as my governor but Idk what scheduler to use
Sent from this guy B)
car vs driver said:
If you need help on the ani, shoot me a PM. We're just running around getting ready for the hurricane so I should have some time tonight to fiddle with it if you want. Better hurry though, because we might be dead and flooded by Monday :laugh:
Click to expand...
Click to collapse
Nice rom good to see your deving now and can't wait for your future work
And about the hurricane i feel so conflicted cus i don't wanna get flooded... but i dont want school :silly:
Screenshots?
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
iNeedICS said:
What scheduler do you recommend? I'm gonna use Wheatley as my governor but Idk what scheduler to use
Sent from this guy B)
Click to expand...
Click to collapse
I'm running cfq schedule, wheatley governor clocked to 1.62GHz. So far so good. I haven't messed with the other schedulers much yet, trying to establish a baseline now that I'm actually done flashing new builds multiple times a day for testing
Decepticaons said:
Screenshots?
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Click to expand...
Click to collapse
Sure, what are you looking for in particular? I added a couple I took earlier today.
Congrats CvD on the release of your ROM. Looking forward to trying it out!!
Sent from my SAMSUNG-SGH-I727 using xda premium
tkjeeper said:
FIRST!
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Click to expand...
Click to collapse
I thanked u just for ur avatar.
Sent from my SGH-I727 using Tapatalk 2
Mmmm I downloaded from both sites and every attempt gets aborted. The download is good. I'm using ROM manager 5.8 something I think
Sent from my SAMSUNG-SGH-I727 using xda premium
I'm trying to flash with twrp and it says failed every time, I downloaded twice and I did check the md5 is it twrp?
Never mind I just tried CWM and it didn't work either
Sent from my iPad ? = overrated leapster
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
For an all new experience with StarDroid ROM's go here for the download
StarDroid ELF v1.0.0
Click here for a youtube review
Version 4.0.1 is fast and stable with increased battery life and revolutionary performance tweaking methods all of which are handled within the boot.img itself, bogomips rating at 1.31mhz OC is 1955 almost double the stock RUU 2.47.502.7. This ROM is designed specifically for the HTC Inspire, unlike many other ROM's which are customized Desire HD or ported from other devices. yes there are a few bugs I'm Sure. Please report any bugs back to this thread so that I can look into resolving them for you.
I'm placing this note here so everyone can see it: IF YOU DOWNLOAD MY ROM VIA Rom Manager that is fine, BUT do not allow or use Rom Manager to install it, once the download is complete just reboot your phone into recovery and then do the full wipe and then choose install from sdcard, browse out to where Rom Manager stores its downloads and choose the rom there. Apparently Rom Manager has some issues with installing Roms although I have never had a problem with it at all.
There are several Custom Roms build from the new RUU 2.47.502.7 so we have choices and flavors galor, outside of major issues I don't believe there will be any additional full builds, I will release patches ands mods/bug fixes as they are made available. I will continue to support this release for some time.
Change Log
V5.0.0 Patch only do not wipe
new flash scripts, user friendly backup user apps prior to update
optimize ext4 partitions.
improved memory management tweaks
included OC Daemon Controller app
V4.0.1 Patch available below (this is a patch only not a full rom)
Updated youtube app
Added Nano text editor support
Added Bash shell support
Modified boot animation
V4.0RC3 Patch available below (this is a patch only not a full rom)
Updated MMS - fixed contact pictures
Updated MMS - increased size limits to 200k 500k and 1024k (3D version only)
Updated Facebook, Market and HTCAlbum
Optimized more PNG's
Added sqlite3 shell support
Removed Adds-Free hosts file (since the hosts config changes so frequently you can download the Adds Free app from the market this allows me to keep a little more clutter out of the ROM)
more to come...
NANDROID!! NANDROID!!
V4.0RC2 available NOW!! Download Below
Will format system and cache MAKE SURE YOU BACKUP FIRST!
A Full wipe factory reset is recomended.
New Kernel - RCMIX3D_v4.4.3_OC1.6_UV_EXT4
Most Sense 3.0 optimized for better clarity and performance
Some icons resized
All PNG images optimized
Framework is pure 2.47.502.7
Framework optimized
Auto Install of backed up apps (place all apps from /data/app in /sdcard/autoinstall before flashing)
Zipaligned on boot
All apps updated to current (new Market app in attachments)
New boot animation and branded Lock Ring (yea cheezy i know)
I have added a download link below for the content needed if you want to modify or create themes for my ROM using the UOT Kitchen
Known Bugs
USB Tethering not working (WiFi Hotspot works)
Default APN's locked (See bottom of this post for instructions on how to unlock)
Thanks to those who helped
klquicksall - for the excellent kernel
seo - for all the sense 3.0 components
dsixda - for the kitchen
wolf_2 - for being a beta tester and for the new stardroid logo and other graphics including the signature logo.
trell959 - for being a beta tester
genepool - for showing me how to unlock the APN by editing the telephony.db
Sybregunne - for the OC Daemon controller app
and of course to everyone else who I may have forgotten to mention, without the hard work and knowlege of the devs on this site custom roms would be nearly impossible to build.
How to Flash
If you are coming from 3.0.x no full wipe is needed
but I do recomend that you do a full wipe.
Coming from all other Roms Full wipe is required
You must have ext4 clockwork recovery
Current ROM Downloads
StarDroid Goblin v1.0.1
StarDroid MyBliss v1.0.3
StarDroid ELF v1.0.5
StarDroid 500
StarDroid Ranger Hybrid AOSP
___________________________________________________
Links of interestHow to install a custom ROM on HTC inspire
What is clockwork recovery and how to use it
If you are having problems installing my ROM's try the steps below, this should get you up and going.
1. Reboot into recovery and do a "Wipe data/Factory reset"
2. Go to the Mounts menu item and choose to format system, data and cache
3. Choose "Install Update from sdcard", browse to where you stored my ROM and select it.
4. REMEMBER!! if you are coming from any other dev's ROM you must do a full wipe including the data partition before installing my ROM. You must also have ext4 recovery 3.0.26 or above. DO Not flash the NoSense rom over the top of the Sense rom do a wipe first.
Recommended Radio 12.56.60.25P_26.10.04.03_M
If you want the HTC Twitter and 3D widget download the addins zip attachment and flash via recovery.
How to Unlock your APN SettingsDownload the "Unlock_APN patch from the attachments and save it to the root of your sdcard. Reboot into recovery and flash the patch. reboot your phone. Your APN settings will be unlocked for editing. HOWEVER, if you select the "Reset to Default" menu button it will revert the settings to default and lock them them down again, if that happens just reflash the patch.
Mods and themes will be listed in the second post.If you have mods or themes that you have working on my ROM and would like me to add them here PM a link and I'll include them here. the only stipulation is that you need to make sure you let me know who created it if it wasn't you so we can give proper credit to the ones who did.
MODS And Themes
MIUI Camera (No 720p Video)
Extended Quick Settings (not tested)
Circle & Percent battery mod
Sense 3.0 Stock Lock Ring
__________________________
How to use the built-in OC_Daemon
Thanks goes to mike1986 for the instructions
Thanks goes to the Virtuous Unity team for the Daemon
1. Uninstall any overclocking tools like SetCPU, NoFrills, etc.. Do Not use SetCPU it will cause problems with the boot image on my ROM
2. With new OC Daemon script the defaults are as follows:
wake_min_freq = 230400 (230 MHz)
wake_max_freq = 1075200 (1.02 GHz)
sleep_min_freq = 230400 (230 MHz)
sleep_max_freq = 537600 (538 MHz)
wake_governor = ondemand
sleep_governor = conservative
You can leave it like that. Our early tests proved, that such default configuration is very good for both battery and performance.
3. But if you decided to change the frequencies for some reason, it's very simple to do.
3a. With root explorer go to system/etc/virtuous_oc and open one of the files you want to configure. You will see:
wake_min_freq = setting minimal frequency for device while it's awake
wake_max_freq = setting maximal frequency for device while it's awake
sleep_min_freq = setting minimal frequency for device while it's sleeping
sleep_max_freq = setting maximal frequency for device while it's sleeping
wake_governor = governor for device while it's awake
sleep_governor = governor for device while it's sleeping
3b. To change frequencies you would need to know the frequencies table from the kernel. The frequencies table from ROM's default kernel:
122000 | 230400 | 460800 | 537600 | 614400 | 691200 | 768000 | 844800 | 921600 | 998400 | 1075200 | 1152000 | 1228800 | 1305600 | 1382400 | 1459200 | 1536000 | 1612800
3c. If you are using different kernel, f.g. LeeDroid's one, you need to check the frequencies table manually. Do it by typing it in any terminal emulator:
cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_available_frequencies
3d. Now when you know which frequency you want to use, edit proper files in virtuous_oc folder, save it and reboot. Done!
I do not recommend changing governors. Don't use SmartAss governor with new OC Daemon. I recommend leaving default governors.
4. However, if you do want to change them run this command in a terminal window to see a list of the available governors for your kernel.
cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_available_governors
Another rom!? I'll be sure to try this one out too
Sent from my Desire HD using XDA Premium App
Correct me if I am wrong, but this rom also properly brands the Inspire and gives device specific audio fixes, GPS configuration, H+ icon and the 5 bar antenna.
Bekuzisedso said:
Correct me if I am wrong, but this rom also properly brands the Inspire and gives device specific audio fixes, GPS configuration and the 5 bar antenna.
Click to expand...
Click to collapse
You are absolutly correct, it also includes the correct gps.conf file as well. Check it out im sure you'll like it. remember do a full wipe first and this is an ext4 rom so you'll need clockwork recovery version 3.0.2.6 or above.
Hey nice to see you here! I plan on trying this ROM, hopefully this weekend.
I have had a decent run with it so far. The only thing I have had to do was to take the voice dialer apk from Inspired Ace and install it.
Hi. Is this any less laggy than all the other 3.0 roms? Thanks. Downloading now anyway
CptAwesomeTT said:
Hi. Is this any less laggy than all the other 3.0 roms? Thanks. Downloading now anyway
Click to expand...
Click to collapse
I believe it performs admirably compared to others, I have made some unique changes to how the performance tweaks are handled so i believe it is more stable and smooth. but try it out let me know, remember thats the beauty of it if you don't like my ROM there are several out to choose from.
Bekuzisedso said:
I have had a decent run with it so far. The only thing I have had to do was to take the voice dialer apk from Inspired Ace and install it.
Click to expand...
Click to collapse
hmmmm, Voice Dialer? possible i missed that one since i don't use voice recognition. i'll add that to the list of possible enhancements for the next version.
Another rom to test out. Thank you and best of luck with your rom.
Is there a preferred or recommended radio for this fabulous sounding ROM?
cstayton said:
hmmmm, Voice Dialer? possible i missed that one since i don't use voice recognition. i'll add that to the list of possible enhancements for the next version.
Click to expand...
Click to collapse
Yeah I don't use that feature often but do use it occasionally. That be cool .
buchez said:
is there a preferred or recommended radio for this fabulous sounding rom?
Click to expand...
Click to collapse
12.54.60.25u_26.09.04.11_m2
cstayton said:
12.54.60.25u_26.09.04.11_m2
Click to expand...
Click to collapse
Yay! That's my radio!!!!...or the one I currently have....squealing because I am downloading your ROM in anticipation of trying it out this weekend
meiguoguizi said:
Yay! That's my radio!!!!...or the one I currently have....squealing because I am downloading your ROM in anticipation of trying it out this weekend
Click to expand...
Click to collapse
Let me know your thought's, I'm considering removing it from Rom Manager it seems to be getting good reviews here but bad reviews from the Rom Manager users so i'm a little confused.
These are my first ROM's so this is a learning experience for me and so far its been fun.
cstayton said:
Let me know your thought's, I'm considering removing it from Rom Manager it seems to be getting good reviews here but bad reviews from the Rom Manager users so i'm a little confused.
These are my first ROM's so this is a learning experience for me and so far its been fun.
Click to expand...
Click to collapse
In my market, east Portland, OR., it's as stable as the 6.30 "AT&T OTA" radio, as it is known. They are both giving me good results at least as far as data speeds, GPS, and general performance. I don't do rigorous battery testing so if people have issues with battery life versus either of those two radios it's not in my world. I plug in a lot .
cstayton said:
Let me know your thought's, I'm considering removing it from Rom Manager it seems to be getting good reviews here but bad reviews from the Rom Manager users so i'm a little confused.
These are my first ROM's so this is a learning experience for me and so far its been fun.
Click to expand...
Click to collapse
I've been using your ROM for a little over 5 hours and its pretty sweet. I've had some minor issues with WiFi after a boot but if you uncheck and recheck it connects.
I came over from LeeDroid's rom, any chance you can make a full quick settings menu with media volume and all that extra candy?
Also I notice HTC sense facebook widget was MIA... Any particular reason for that?
Awesome ROM otherwise dude... Keep up the great work!!
Sent from my Inspire 4G using XDA Premium App
Buchez said:
I've been using your ROM for a little over 5 hours and its pretty sweet. I've had some minor issues with WiFi after a boot but if you uncheck and recheck it connects.
I came over from LeeDroid's rom, any chance you can make a full quick settings menu with media volume and all that extra candy?
Also I notice HTC sense facebook widget was MIA... Any particular reason for that?
Awesome ROM otherwise dude... Keep up the great work!!
Sent from my Inspire 4G using XDA Premium App
Click to expand...
Click to collapse
I can add the HTC facebook widget back in, i took that along with a list of other fluff out because it was really more of a personal preference for me. i also noticed that the htc widget didnt seem as realiable as the regular facebook widget that you get when you install facebook from the market.
i'lllook into adding the full quick settings versus what i have. should be relativly straight forward
i have also noticed the wifi issue thought it was resolved with the new kernel from klquicksall, but guess not for my rom. since i havent ever messed around with the kernel i may have to find a different solution for it.
Greetings everyone,
May I present you with ShadowKernel.
I fully acknowledge the other outstanding kernel developments you have to choose from, but I would appreciate any feedback from anyone willing to test this for me. I believe it to be stable, as I have not experienced any reboots or other issues that I can tell, but I'm sure the heavy users out there can help me confirm that.
My main concern right now is to hear what you have to say regarding the voodoo color because there wasn't exact code for our current source. This is a result of hours of code comparison with sources from thomasskull666 & earthbound (thanks to them), and multiple Nexus kernels.
Huge thanks to the many talented developers out there including (in no particular order) but not limited to:
chris41g, mkasick, Rodderik, nubecoder, earthbound, toadlife, thomasskull666, DRockstar, supercurio, Ezekeel, SenseiSimple, noobnl, xcaliburninhand, k0nane
See the feature table below the download section. I've maintained the same features in all the kernels (except where noted), so just download the corresponding kernel for your ROM and flash in CWM.
***This is the thread for the EI22, CM7 & MIUI Shadow Kernels.***
If you need the EL30 TW kernels, see this thread.
If you need the FC09 TW kernels, see this thread.
If you need the CM9 kernels, see this thread.
**To help with bug posts, please state which kernel version and ROM you are running. Thank you.**
BML
------------------------------------------------------------------------------
EI22 - For EI22 ROMS
Download ShadowKernel-EI22-v1.0.4 [Mirror]
Download ShadowKernel-EI22-v1.0.6+OC/UV [Mirror]
------------------------------------------------------------------------------
MTD
------------------------------------------------------------------------------
TW EI22
Download ShadowKernel-TW-MTD-v0.5+OC/UV [Mirror]
**Fixed Linux wired tether (RNDIS).**
------------------------------------------------------------------------------
CM7.2-RC2 + Nightlies
Download ShadowKernel-CM7-v0.9.1 [Mirror]
md5: d284d35486f6d5c6989377d6f1a7e510
**CM: Updated for CM7.2-RC2. Capacitive backlight disabling support, Crespo audio drivers with volume level fixes, and Voodoo Sound.**
-----------------------------------------------------------------------------
MIUI Official
Download ShadowKernel-MIUI-MTD-v0.9+OC/UV [Mirror]
**MIUI: Sync'd with features added to CM7 kernel v0.9 (Fixed Linux wired tether (RNDIS). Adds support for Dock Audio. CPU frequency table fixes.)**
------------------------------------------------------------------------------
Features:
- Root
- Ext4 support
- init.d support
- 3 button hard reset
- kexec support
- Galaxy dock audio support
- bootanimation.zip support
- Installs Bash if not present (TW only)
- Reboot to CWM Recovery support
- Built-in TUN, CIFS, FUSE, & TCPMSS
- Keyboard & other mkasick patches
- Additional CPU Governors: SmartassV2 & interactiveX
- Additional I/O Schedulers: BFQ & SIO
- Voodoo Sound (use the free Voodoo Control App)
- Voodoo COLOR (also in the free Voodoo Control App)
Much more to come.
Plus version:
- Everything above
- Overclocking/Undervolting support up to 1.4GHz with Voltage Control support. (Added 600, 900, 1100, 1200, 1300, & 1400)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Additional Resources:
See this thread for color setting discussion, but remember to experiment and find the right settings for you:
http://forum.xda-developers.com/showthread.php?t=1002090
Changelog:
v1.0.6+
- Fixed: Correct su ownership to fix Titanium Backup warning, possibly other things.
- Fixed: Only install su if not present.
v1.0.5+
- Fixed: 1.1GHz Frequency (was acting like 1.2GHz)
- Changed: Tweaked 600MHz & 1.3GHz Frequencies
v1.0.4
- Changed: Tweaked default Voodoo Color values.
v1.0.3
- Fixed: Order of kernel bootup commands to cooperate properly with certain custom init.d scripts.
v1.0.2
- NEW: CPU Governors SmartassV2 & InteractiveX
- NEW: I/O Schedulers BFQ & SIO
- NEW: Installs bash if not already present
- Fixed: Reboot recovery compatibility with certain ROMs (Sleeper, Legendary, any others using similar code)
- Fixed: Voltage Control now able to disable frequencies
- Fixed: Increased USB signal quality
- Changed: USB debugging now on by default
- Changed: adb user defaults to root
- Changed: Re-enabled stock .qmg animation support
- Changed: Increased timeout for SD card data commands (possible fix for sdcard data corruption)
v1.0.1
- Fixed: Capacitive buttons now work on keyboard timeout.
Full github TW Ei22 kernel source.
Full github TW EL30 kernel source.
Full github CM kernel source.
Previous Versions:
BML
Download ShadowKernel-v1.0.5+OC/UV
Download ShadowKernel-v1.0.4+OC/UV
Download ShadowKernel-v1.0.1+OC/UV
Download ShadowKernel-v1.0+OC/UV
Download ShadowKernel-v1.0
MTD TW
Download ShadowKernel-TW-MTD-v0.4+OC/UV
[Mirror]
**Fixed Titanium Backup su warning (thanks to toadlife), fixed Power-Off Charging, Fixed 1.1GHz Frequency (thanks to toadlife), tweaks to 600 & 1300.**
--------------------------------------
Download ShadowKernel-TW-MTD-v0.2+OC/UV
**Working Reboot to CWM Recovery (thanks to mkasick) and ROM Manager EpicMTD Support (thanks to noobnl, toadlife).**
--------------------------------------
Download ShadowKernel-TW-MTD-v0.1+OC/UV
CM / MIUI
CM7 Nightlies w/ WiMAX
Download ShadowKernel-CM-MTD-v0.9+OC/UV [Mirror]
**CM: Updated for Nightly 21+. Fixed Linux wired tether (RNDIS). Adds support for Dock Audio. CPU frequency table fixes.**
------------------------------------------------------------------------------
Download ShadowKernel-CM-MTD-v0.8+OC/UV
[Mirror]
**CM: Updated for Nightly 21. Adds support for Dock Audio. CPU frequency table fixes.**
--------------------------------------
Download ShadowKernel-CM-MTD-v0.7+OC/UV
**CM: Updated for Nightly 13 - includes video recording fix.**
--------------------------------------
Download ShadowKernel-CM-MTD-v0.6+OC/UV
[Mirror]
**MIUI: Fix for Titanium Backup. Working Reboot to CMW Recovery. Fixed wifi for RC0.5 or later.**
--------------------------------------
Download ShadowKernel-CM-MTD-v0.5+OC/UV
**CM: Working Reboot to CWM Recovery (thanks to mkasick). No Voodoo Sound, so no mic feedback. Fixed wifi for nightlies. Added WiMAX.**
**MIUI: Working Reboot to CMW Recovery. Fixed wifi for RC0.5 or later.**
--------------------------------------
Download ShadowKernel-CM-MTD-v0.4+OC/UV
**CM: Added WiMAX.**
--------------------------------------
Download ShadowKernel-CM-MTD-v0.3+OC/UV
**CM: No Voodoo Sound, so no mic feedback. Fixed video recording. Fixed wifi for nightlies**
**MIUI: Fixed wifi for RC0.5 or later.**
------------------------------------------------------------------------------
CM7 RC0 / MIUI Before RC0.5
Download ShadowKernel-CM-MTD-v0.2+OC/UV [Mirror]
**CM: This is for the stable build. For nightlies after wifi & WiMAX fix, please use v0.4 or newer.**
**MIUI: Do not upgrade past v0.2 if you are not on RC0.5 or later, it will break wifi.**
First. Installing now.
Sent from my SPH-D700 using XDA App
Moar kernel guys!!!!!!
I need to learn how to do this kernel stuff...
Sent from my SPH-D700 using XDA App
Installing now. Although, I probably should do a clean install, so maybe report back tomorrow.
socos25 said:
Installing now. Although, I probably should do a clean install, so maybe report back tomorrow.
Click to expand...
Click to collapse
I've flashed the samurai kernel and back to this the other day without issue, but I suppose I can't guarantee anything.
Please dont ever mess with frame rates. I like 60 with vsync like stock.
Sent from my SPH-D700 using XDA App
marcusant said:
Please dont ever mess with frame rates. I like 60 with vsync like stock.
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
I don't have that in my plans.
New Colonel ! or is that kernal ? THX !
Nice to see a new Kernel Dev join our community
I just did a clean install about an hour ago so I'll run this kernel right now and report back sometime tomorrow
Sent from my SPH-D700 using xda premium
Dl'ing now thanks for be an asset to this communtity! Hitting the thanks button
Sent from my SPH-D700 using Tapatalk
I love the voodoo color...
Sent from my SPH-D700 using XDA App
marcusant said:
I love the voodoo color...
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
It really makes a big difference. I don't watch many videos. Hopefully someone can comment on how they look with the new colors compared to the stock.
Ceelos09 said:
Nice to see a new Kernel Dev join our community
I just did a clean install about an hour ago so I'll run this kernel right now and report back sometime tomorrow
Sent from my SPH-D700 using xda premium
Click to expand...
Click to collapse
Thanks, I've been toying with ROM and kernel development for a little while now for learning & personal use. Finally have something to contribute. I'll be coming out with my ROM soon along with some themes.
Great to see another kernel!
Would be good for the users and testers to know what your goals for this kernel are -- Stability, performance, battery life, multimedia quality, or quantity of features (governors, CPU scales), etc -- and in what priorities/order.
EDIT: Does this kernel have toadlife's patch for wifi-related reboot and txqlen?
EDIT 2: And I like that your Github is forked off opensource.samsung.com. Easy to trace your patches.
bbelos said:
Thanks, I've been toying with ROM and kernel development for a little while now for learning & personal use. Finally have something to contribute. I'll be coming out with my ROM soon along with some themes.
Click to expand...
Click to collapse
Good 2 Hear and Good Luck !
What exactly is voodoo color?
tdwp16 said:
What exactly is voodoo color?
Click to expand...
Click to collapse
Voodoo sound. For the screen. Complete color control and improvements.
Sent from my SPH-D700 using XDA App
lost_ said:
Great to see another kernel!
Would be good for the users and testers to know what your goals for this kernel are -- Stability, performance, battery life, multimedia quality, or quantity of features (governors, CPU scales), etc -- and in what priorities/order.
EDIT: Does this kernel have toadlife's patch for wifi-related reboot and txqlen?
Click to expand...
Click to collapse
All of the above. But seriously I hadn't thought of it that way yet. Stability and performance for sure, then I can focus on tweaking for battery life. I would like to add in some overclocking and voltage control support as well.
And no, this does not have any of toadlife's patches. I have been watching his thread but I don't have any reboots. Maybe he or anyone else with those problems will test this for issues.
Voodoo color is awesome. All around great kernel.
Very fast.
this is my compiled kernel, builded from samsung source code (GT-S5360_GB_Opensource_Update2.zip). please read this whole post before you install this kernel in your device and don't expect something "WOW" from this kernel since its only my kernel for my daily usage.
the main interest of this kernel is to build a kernel which:
1. compatible to all rom (custom n stock)*.
2. simple, light, yet still customizable
3. save more batteries
4. decent performance
if you're looking for a kernel as described above, then this thread will give what you want.
the link :
Click to expand...
Click to collapse
special built kernel with a2sd full support -- for advance user
note: clearly stated for advance user. don't ask me why it didn't boot up in your rom.
Click to expand...
Click to collapse
basic feature:
1. init.d script support
2. Advance Power Management enabled (not 100% working but it solve the screen issue)
3. built in droidwal support and bacem tweak
4. 4 freq
5. a few more gov and io sched
how to: flash the file via CWM.
credits:
1. irfanbagus for the patch and bacem tweak
2. savie for the help for 4 freq
3. marcotoo for the nice discussion about kernel on his thread and the solution for deep sleep from his patch thread.
4. harish for the tools
5. maroc aka yahya, edoko, tegrak, sdadier, droidzone @github for source code
6. last but not least you...for support and nice development atmosphere here. keep follow the rules guys.
TERM OF USE AND SHARING:
this thread intent is for sharing. feel free to use, edit, distribute all material inside this thread which came from me. if there any parts of this mod which comes not from me please refer to the original dev I've mentioned in this thread. if want to share it to another forum or modify it you don't have to ask my permission. no need to credits, put links or whatsoever. you'll only need to remember that you should held all the responsibility by using this mod, modify it or distribute it. DO IT WITH YOUR OWN RISK
Click to expand...
Click to collapse
IMPORTANT NOTES:
1. please don't ask anything about CWM. I prefer to never put it on my kernel.
2. trying to fix the 3rd freq but still no luck. we have 312-x-624-832 freq but the (x) freq is still buggy and imperfect. I think we need some help to fix it. already tried with 416, 442, 468, 520 but the bug is still there.
3. sorry, no a2sd support at this moment. you can use dsixda's kitchen or harish's tools to build a kernel with repencis's ramdisk to make this kernel support a2sd by yourself. the good thing is that your a2sd will work but it will also make your device boot (a lot) longer. I prefer to not use it on my kernel since I never use a2sd.
4. I give you three 'cats' gov in this kernel
powercats = lazy --> performance
blackcats = smartassv2 --> balanced setting
activecats = intellidemand --> battery saver
they have been tweaked and renamed just to make you easier when choosing the govs.
5. if you have a2sd running in your device, please uninstall it before installing this kernel. or else, you'll get bootloop
changelog
v0.1 :
first released version
v0.2 :
- swap
- ext4
- more iosched
- optimized conservative for battery saving
- ciffs (not really needed but it will be usefull if someone might want to use it)
v0.3 :
- new freq configuration (312-468-624-832). less sudden jumped out freq from 312 to 624 but it still imperfect yet.
- new govs, wheatley removed. now conservative is set as default for battery saving option.
- configured iosched, sio as default.
- now it use a part of koneu patch to fix deep sleep problem
v0.4 :
- minor tune on the kernel source and configuration
- as requested, OTG stuff added**.
v0.5:
- minor tune on battery management
- tun.ko build in
- few sound API and driver added
- as requested, NTFS modules built in
v0.5.1:
- lil bit tuning. trying to fix ntfs problem
- KSM for page merging support
- HID support
v0.5.2:
- alternate version of 0.5.1 without any OTG related stuff
v0.6.9:
- 6 frequencies
- setting for conservative and blackcats modified to match the new freqs.
v1:
- 5 frequencies. 780mhz almost never used so I removed it (468 is a buffer to prevent the freq suddenly jump to max freq. it actually working at 312mhz)
- HID driver removed (you don't even know what it is)
- few API removed for lightweightness
- CIFS removed since almost no one use it.
- deepsleep bug from v0.6.9 fixed
- screen problem fixed (never happened on mine but need report from users)
- battery APM
v1.1
- black screen bug fixed
* CM is not supported. sorry.
** OTG stuff still untested. the driver and NTFS modules required is inside it but I don't have the equipment to test it.
Click to expand...
Click to collapse
IMPORTANT STUFF: INCOMPATIBILITY ISSUE REPORT
# DXLF deodexed ROM (reported count: 1)
reason : error due to tweak inside it. already fixed.
please report here if you find my kernel doesn't boot. specify your system in details like : the rom, tweaks, a2sd/non a2sd, kernel version. I'm trying my best to make this kernel compatible with all rom (except CM). all kernel kernel here is already tested in my device before I uploaded it. however, my work might not perfect yet so that it might won't boot in several ROM.
Click to expand...
Click to collapse
kernel source link: http://www.mediafire.com/?bgh79kbcof9jctf (it only contain the modified files. you need to download the whole source code from samsung at opensource.samsung.com. I'm using update 2 for european region).
Finally
BTW Freq,Governors,IO working?
Will test now
Edit : Sio not included, noticed Speed in booting, nice Kernel, expecting more, but not too much..LOL
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
its actually already uploaded several days ago (lol)
yeah finally
this not support dualboot it mean support a2sd, right ?
reserved..
Sent from my GT-S5360 using xda premium
@ron: why don't you try to build your kernel. you already on linux, don't you?
kurotsugi said:
@ron: why don't you try to build your kernel. you already on linux, don't you?
Click to expand...
Click to collapse
yes, i was on ubuntu 12.04, but i recently formatted my PC to Windows since i need it for school for my class presentations, i have a lot of work and i also need it for my part time job, so basically ubuntu was eating space, so switched to windows for a while, will be going back to ubuntu next year after graduation:highfive:
Noticed that frequencies 416 is rarely used
from 312 it jumps to 624 and rarely on 416..observation only, will test more
yup...416 is tend to not stable and it easily jumped out to 624. thats a bug from 4 freq mode using 0x0d. it can solved but we should underclock it too 104. its not a good option for me.
Wow downloading!!!!!
Sent from my GT-S5360 using xda premium
@ kuro, does it supports A2SD? nice kernel buddy. :good::good:
Ha! finally..
Great job my friend.
sent while doin' some burnouts
Benchmark for 416 MHz? How did you manage to fix the incapability of the CPU to reach that frequency?
kurotsugi said:
this is my compiled kernel, builded from samsung source code. please don't expect something wonderfull from this kernel since its only my kernel for my daily usage.
feature:
1. init.d script support
2. Advance Power Management enabled
3. built in droidwal support and bacem tweak
4. 4 freq
5. a few more gov and io sched
how to: flash the file via CWM.
credits:
1. irfanbagus for the patch and bacem tweak
2. savie for the help for 4 freq
3. marcotoo for the nice discussion about kernel on his thread
4. harish for the tools
5. edoko, tegrak, for source code
6. last but not least you...for support and nice development atmosphere here. keep follow the rules guys.
PS: please don't ask anything about CWM. I prefer to never put it on my kernel.
Click to expand...
Click to collapse
Reserved master...
Sent from my GT-S5360 using xda app-developers app
@marco: that freq isn't fixed yet. the benchmark and bogoMIPS score tend to give unstable value between 416 and 624. I think the freq for 0x0d isn't 416. it might a lil bit higher than it.
You could try 520…
Awesome. Flashing right away. Kuros stuff is always awesome. Was expecting this kernel. Thanks man
@marco: yup...I'll try that later. now I'm stil experimenting with something else.
@hitme: this kernel only give some basic stuff. it can't be compared to maroc's, repencis's, savie's or marco's kernel.
kurotsugi said:
@hitme: this kernel only give some basic stuff. it can't be compared to maroc's, repencis's, savie's or marco's kernel.
Click to expand...
Click to collapse
Thats exactly what I want. I dont use a2sd/swap and dont like ext4 auto mount. Was using rev54 savies till now as it has the exact one. Used rev 60 v2 for some time(it had ext4, inbuilt CWM etc) but it was draining battery some what since it got ext4 and inbuilt CWM etc. I need a kernel which is light, fast, battery saving and I only want droidwall. So this one exactly suits me
As far as CWM is concerned, as we can flash the same with just two clicks why so much rush to integrate to kernel? Its best not included imo
this kernel is already support swap and ext4 partition. I never used it but I think it will be usefull for someone who might want to use it. I'm still testing several stuff with the gov here and io sched here. got some interesting gov but it doesn't work at this moment. I'll upload it when I finished with this one.
EDIT: this kernel was my last stable kernel built. I can't clearly remember all stuff inside it. can you tell me the govs inside it?
Hmm then this isn't a basic kernel just flashed it and looks good. I'll give my detailed report later
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
FAQ - README FIRST!
What is KingBeatZ?
It was formally known as PacKing BeatZ which was based on PACman rom.
What's the difference between this and the other KingBeatZ?
This is fully built from sauce with PACman as its base but with many modifications. Basically it supersedes it.
Like what
Linaro toolchain 4.6.3 and and 4.7.1
Custom made audio base
Optimization from the base up O2 Kernel and O3 rom
Linaro libjpeg-turbo
OTA Updates
SuperSU
Nova Launcher
Launcher2
Modified DSPManager aka BeaTz Manager
AOSP PA 2.99 - Yeah that's right
OK that sounds cool but what about this kernel you're talking about?
Audio Codecs and formats not used in regular kernel
XZ COMPRESSION
BFQ V5, SIO, VR, CFQ, NOOP AND DEADLINE - IO Scheduler
Hotplug, Intellidemand, ondemand, performance, user space, and power save -governors
OTG SUPPORT - thanks to CM10
What else? What about S2W and so on?
I find them useless and not worth the trouble especially S2W unless its requested repeatly
OK I GOT IT...But Why use your ROM you're just a kanger or so they say
LOL check out my credit page. I don't kang. I just simply do so much to keep track of it all. Don't believe me? OK, I don't care. I made this rom for people who truly enjoy a rom that's designed for the user not by my decision alone. Go join the other white knights.
Go make your own rom!
Join the club. There's a line though. While waiting please refer to the answer above - thanks again. It might take you a long time to comprehend it. No worries you'll get there in no time.
Where is the dmn source - Under Heavy Development - Why?
I'm doing this by myself so I'm figuring out how to completely setup the repo so people can build this for other devices.
Now if you took the above seriously or was offended, well...the only thing I can say is that take a long deep breath and relax.
Description
The struggle to find the ROM you need is over. Some people like CyanogenMod 10, Some prefer AOKP, Some like the advantages of Paranoid Android.
To cure your ROM hunt we have come up with the P A C man ROM.
PACman is a unique ROM.
We have picked the best features from CM10, AOKP and PA and combined them in a single rom so you get the experience you deserve
To enjoy the features of every available project without the hassle of flashing regularly.
The RoOM is rock stable for an average user but keep in mind the ROM is in WIP stage so expect some minor hickups but we are trying our best to resolve these issues
Features
CM10
AOKP M1
Paranoid Android
Fresh compiled CM10 kernel
Init.d Support
Custom Audio
OTA Updates
A LOT more to come
Coming from another Custom ROM(including previous builds):
Wipe Data/Factory Reset
Wipe System / Dalvik Cache / Cache
Flash ROM
Flash your choice of Gapps
Wipe Cache / Dalvik Cache
Reboot
Let it settle
Profit?!!?
Updating from previous version(including OTA):
Flash ROM
Flash your choice of Gapps
Wipe Cache / Dalvik Cache
Reboot
Let it settle
Profit?!!?
DOWNLOADS
4.1.2
KingBeatZ v1.3.1
GappsKingBeatZ edition
4.2.1 Preview
KingBeatZ Nightlies
Gapps for 4.2.1
Side Notes for 4.2
Whatever problems that the Unofficial CM has, more than likely this rom will have.
The official thead is here
Side Notes
Please Use Paranoid Pref's for DPI changes and not Rom Control
Performance Tips
Set Zram to OFF
Put Purging OFF
Put KSM ON
Governor = hotplug
Audio Tips
Have fun with them, BUT DO NOT HAVE VOLUME at MAX if it's your first time with this rom.
Be very careful with compression - it can be your best friend or worst enemy
Virtualizer is quite useless
I personally do not use DSP Manager
Change Log
01/08/13 - 1.3.1
PLEASE DO A FULL WIPE FOR THIS ONE
Coming Soon (IP)
01/03/13 - 1.3.0
Updated kernel to 3.0.57
Using experimental settings
Testing dsp-link
Updated Nova
Different compiling method
Possible VSYNC in 3.0.57!
12/28/12 - 1.2.0
Overclocked GPU (Rohan)
Modified WCD9310 Codec (Sbryan12144)
Thermal Control (Zarboz)
S2W (Zarboz)
Hotplug from 3.0.57
Tweaked Audio a little bit
Tweaked DSPManager for LPA
Re-enabled LPA decode
Updated Nova
Deleted init.d script
Incomplete list for now
12/21/12 - 1.1.0
Added Sense Audio - Thanks to Tachi91 - Providing the initial release - ChongoDroid - For providing a de-odex JB Sense
Enabled Cubic and Sinc Resampling
Updated to AOSP PA new overlay and colors
Added init.d for SD Cache - mp decision tweaks - and other misc tweaks
Changed Recommended Settings for performance
12/19/12 -
Initial Release
KingBeatz GitHub
Old Downloads
KingBeatZ v1.3.0
KingBeatZ v1.2.0
KingBeatZ v1.1.0
KingBeatz V1.0
Screenshots
CAUTION HIGH RESOLUTION PICS
Source
KingBeatz GitHub - Pretty much done - I will be writing an in-depth instructions on how to port this to other devices soon.
PAC Source
Special Thanks
CyanogenMod Team
AOKP
Paranoid Android
BMP7777
gs2user
Kylecore(myself)
Credits and Special Thanks
I would like to thanks all these people for the following
CM10 Team - For providing an awesome rom and base for my kernel (linked above)
AOKP - For providing an awesome rom (linked above)
Paranoid Android - For providing an awesome rom (linked above)
PACman - For providing an awesome base for my rom (linked above)
OTAUpdateCenter - otaupdatecenter.pro
Wolfson - Audio Codec
Voodoo Sounds - Base for Audio Codec
Linaro Android Team -Toolchain and libjepg-turbo
BenjaminGaignard - Creator Libjpeg-Turbo and his guide on integration into the rom - Guide is right here
Chainfire - SuperSU - Thread can be found here
mamarley on XDA - His Linaro Optimized guide - Based on CM9 Droid Incredible
h8rift on XDA - For introducing CM to the HOXL and all his hard work
rohan32 on XDA -Providing ParanoidAndroid for the HOXL
[*] His kernel codes for my kernel
[*] Govenor
[*] Intellidemand
[*] Hotplug
[*] IO Scheduler
[*] SIO
[*] VR
Click to expand...
Click to collapse
-kbc-developers on github -
His kernel codes
add xz compression support
MSM-MPDecision
-Zeroinfinity on XDA
was the initial force which made me started Android Development
--For anyone whom I miss, PM me and I'll add it
CM10.1 Nightlies - Kernel
KingBeatZ Nightlies
INFO
I will be trying to keep up with the nightlies and update it accordingly with my own tweaks and kernel
WIP
reserved
Screenshots
http://imgur.com/a/MssQZ
Or
Interesting....!
I really hope the RAM is overclocked... or else it won't be fast at 1ghz
Welcome back
ohai! I'm uploading right now. Sources will be up after I clean it up. Within the next 24hours. Credits will be given. Repo will be setup. Babies will be saved.
ive been a tester for him and all i gotta say that i wont go to another rom at this pint
ChummyDays said:
The gapps link says "gapps - aznrice edition" but when i flashed, "it said made by:" and then someone else's name.
Did you modify the gapps or....?
wanted to get a picture of it but other people can flash and see.
Click to expand...
Click to collapse
It was originally by Killdroid but I updated and put in some of my preference apps. IE, dropbox, google music, SwiftKey Flow Beta, and Paranoid Preference. It should be in the FAQ...if someone fixs the link.. :/ There's more but I can't remember it from the top of my head.
Anyways 2 bugs to report
When connecting USB it soft reboots.
Any DPI change I.e phablet. Will end up boot looping. Just reboot and it will stick.
Sent from my One X using xda app-developers app
And another bug.
Don't use the DPI changer in rom control. The status bar will stay 320 DPI. Or huge lol.
Sent from my One X using xda app-developers app
Yo man, we all appreciate your work and I like that you give other people another ROM.
But to avoid the hassle, you REALLY should give credits and thank yous the same time the ROM is uploaded. Not "oh I'll get it done later" or something else.
Sluff said:
Yo man, we all appreciate your work and I like that you give other people another ROM.
But to avoid the hassle, you REALLY should give credits and thank yous the same time the ROM is uploaded. Not "oh I'll get it done later" or something else.
Click to expand...
Click to collapse
Did you not read the third post? I never said it was a hassle. People keep putting words into my mouth. I said I'm cleaning up my repo. With 120gb SSD, I'm very limited with space. Have you ever built a ROM on a 1.6 dual core net book with 120gb? Do you know what it feels like? Is so please enlighten me. I'm not being sarcastic or anything.
Sent from my One X using xda premium
spirusthedj said:
And another bug.
Don't use the DPI changer in rom control. The status bar will stay 320 DPI. Or huge lol.
Sent from my One X using xda app-developers app
Click to expand...
Click to collapse
Please use paranoid prefs for DPI changing and not rom control
updated OP
spirusthedj said:
Anyways 2 bugs to report
When connecting USB it soft reboots.
Sent from my One X using xda app-developers app
Click to expand...
Click to collapse
Mine has no such issue with usb, try a Full wipe, factory reset / system / Dalvik Cache / Cache and after installatin completes rewipe dalvik cache
Whoops, lol.
Yes I did read the first and third post. I didn't catch the orange words at the very top. Didn't know this was your ROM haha.
kylecore said:
Please use paranoid prefs for DPI changing and not rom control
updated OP
Mine has no such issue with usb, try a Full wipe, factory reset / system / Dalvik Cache / Cache and after installatin completes rewipe dalvik cache
Click to expand...
Click to collapse
I've done that I went to a new ROM and it worked fine there.
Sent from my One X using xda app-developers app
---------- Post added at 04:47 AM ---------- Previous post was at 04:42 AM ----------
I might have screwed it up downgrading hboot.
Sent from my One X using xda app-developers app
spirusthedj said:
I've done that I went to a new ROM and it worked fine there.
Sent from my One X using xda app-developers app
---------- Post added at 04:47 AM ---------- Previous post was at 04:42 AM ----------
I might have screwed it up downgrading hboot.
Sent from my One X using xda app-developers app
Click to expand...
Click to collapse
Thanks for making me sound like I screwed up benny boy.
Sent from my One X using xda premium
Sorry my bad lol. Hey least I had this time. Last time I didn't have it until I wiped due to my mistake.
Sent from my One X using xda app-developers app
What's your hoot?
Sent from my One X using xda app-developers app
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Info from me (Hbo): these are test releases of ArchiKernel freshly compiled with i9305 defconfig. I have tested it for few days and it's running really fine. However, consider that it may contain some undiscovered bugs etc. Then, just tell me what's wrong and I'll check if I can do anything about that. Please check flashing and updating instructions
Base: Samsung N7100XXUFNI1 Sources (NOT smdk4x12)
Linux 3.0.31
Compiled using latest ArchiToolchain
ArchiDroid Optimizations
Using AnyKernel method (compatible with all ROMs AOSP)
And many other awesome things I have no time to list
Other kernel's features:
Boeffla Sound
Configurable touchboost
Configurable touchwake
Zzmoove governor with default Moderate profile
BFQ i/o scheduler
GPU UV/OC
CPU UV/OC, idle modes
Charging interface
LED interface
Android and Kernel logcats switches
Mdnie control
Vibration control
ArchiDroid Optimizations:
- Fully optimized for Samsung Galaxy S3 (-marm -march=armv7-a -mcpu=cortex-a9 -mtune=cortex-a9 -mfpu=neon -mfloat-abi=softfp)
- Compiled with O3 optimization level (-O3)
- Performed interprocedural pointer analysis and interprocedural modification and reference analysis (-fipa-pta)
- Performed loop invariant motion on trees. It also moved operands of conditions that are invariant out of the loop, so that we can use just trivial invariantness analysis in loop unswitching. The pass also includes store motion (-ftree-loop-im)
- Created a canonical counter for number of iterations in loops for which determining number of iterations requires complicated analysis. Later optimizations then may determine the number easily (-ftree-loop-ivcanon)
- Performed induction variable optimizations (strength reduction, induction variable merging and induction variable elimination) on trees (-fivopts)
- Tried to reduce the number of symbolic address calculations by using shared “anchor” symbols to address nearby objects. This transformation can help to reduce the number of GOT entries and GOT accesses on some targets (-fsection-anchors)
- Assumed that loop indices do not overflow, and that loops with nontrivial exit condition are not infinite. This enables a wider range of loop optimizations even if the loop optimizer itself cannot prove that these assumptions are valid (-funsafe-loop-optimizations)
- Moved branches with loop invariant conditions out of the loop (-funswitch-loops)
- Attempted to avoid false dependencies in scheduled code by making use of registers left over after register allocation. This optimization most benefits processors with lots of registers (-frename-registers)
- Re-ran common subexpression elimination after loop optimizations are performed (-frerun-cse-after-loop)
- Didn't keep the frame pointer in a register for functions that don't need one. This avoids the instructions to save, set up and restore frame pointers; it also makes an extra register available in many functions (-fomit-frame-pointer)
- Made a redundant load elimination pass performed after reload. The purpose of this pass is to clean up redundant spilling (-fgcse-after-reload)
- Ran a store motion pass after global common subexpression elimination. This pass attempts to move stores out of loops (-fgcse-sm)
- Eliminated redundant loads that come after stores to the same memory location, both partial and full redundancies (-fgcse-las)
- Constructed webs as commonly used for register allocation purposes and assigned each web individual pseudo register. This allows the register allocation pass to operate on pseudos directly, but also strengthens several other optimization passes, such as CSE, loop optimizer and trivial dead code remover (-fweb)
- Performed tail duplication to enlarge superblock size. This transformation simplifies the control flow of the function allowing other optimizations to do a better job (-ftracer)
Click to expand...
Click to collapse
What to expect:
- Awesome stock battery life on AOSP ROMs (due to Samsung sources and not smdk4x12)
- Blazing fast (Deep advanced optimizations, Linaro toolchain, this is the beast)
- High compatibility (AnyKernel method, the kernel should work on all ROMs)
What to NOT expect:
- Many CPU or I/O governors # We don't need overhead, you can achieve nearly the same just by tweaking governor to your needs
- Features I don't like/need
- Dualboot (see above ^)
- F2FS (see above ^, however this one depends on kernel upstreaming, as f2fs is merged)
Flashing instructions:
1. Make sure that you have stock kernel already flashed (the one which comes with your ROM), if you're running custom kernel already, reflash your ROM without wipe, this will also flash stock kernel. This is ultimately important, DON'T FLASH ARCHIKERNEL ON ANOTHER CUSTOM KERNEL, you may face various issues you've never seen before.
* This is because ArchiKernel uses AnyKernel method - it pulls ramdisk from your current kernel. If you brick your phone by flashing AK on top of custom kernel, you know who will be responsible for that.
2. Flash ArchiKernel zip.
3. Profit!
Updating instructions:
1. If you arleady have older ArchiKernel version flashed properly with above instructions, and changelog doesn't state otherwise, just flash the .zip with new version of AK.
2. No wipes, cleaning dalvik cache or anything else is required, flashing zip is enough.
3. Profit!
Bugs:
None known
Contributors
JustArchi, Moster2
Source Code: https://github.com/ArchiDroid/ArchiKernel
Download the newest version:
CLICK
Some older version download:
This one for me, reserved.
First version, dated 14/03/2015 is out. Download, flash on STOCK kernel of your Lollipop rom and report It should work on Nameless and AICP for sure, interesting if it works on CM and RR.
Working fine with todays RR O3 Test Build (which is in upload at the moment).
Great Kernel so far after a few minutes, many thanks.....whether the kernel is also working on normal or official RR, I will test soon, but I am quite sure that he does .
rodman01 said:
Working fine with todays RR O3 Test Build (which is in upload at the moment).
Great Kernel so far after a few minutes, many thanks.....whether the kernel is also working on normal or official RR, I will test soon, but I am quite sure that he does .
Click to expand...
Click to collapse
That is really, really, really good!
I found ArchiKernel a really good, comfortable to configure and universal kernel
Hbohd said:
That is really, really, really good!
I found ArchiKernel a really good, comfortable to configure and universal kernel
Click to expand...
Click to collapse
hi, can i just flash this kernel after I flash the aicp rom？ becasue I dont' know if the kernel come with aicp rom is stock or custom.
It's stock, so you can directly flash this kernel after flashing rom. Every AOSP Lollipop rom that we have comes with a stock, unmodded kernel
Very nice can't wait to testing it looking forward to it.
Just flashed. Seems fine so far, but does it need also LMK corrections?
Sent from mobile
This kernel is real beast 27500 on antutu @Stock
I know that archi won't add governors/schedulers but if you mate could edit the kernel just to add zzmoove or smartass for battery saving and zen scheduler , it'd be very very great.
I'd love to test some OC @1600 for cpu and @666 for gpu just to see where it could go with such a kernel if you have time .
anguslaw said:
hi, can i just flash this kernel after I flash the aicp rom？ becasue I dont' know if the kernel come with aicp rom is stock or custom.
Click to expand...
Click to collapse
does it work on acip? i have aicp but i dont know if this works on it
klemen241 said:
does it work on acip? i have aicp but i dont know if this works on it
Click to expand...
Click to collapse
If you read 3rd post in this thread you will know the answer
I'm sorry if my question is stupid but is this work with rooted touchwiz kitkat 4.4.4 rom?
aaz03 said:
This kernel is real beast 27500 on antutu @Stock
I know that archi won't add governors/schedulers but if you mate could edit the kernel just to add zzmoove or smartass for battery saving and zen scheduler , it'd be very very great.
I'd love to test some OC @1600 for cpu and @666 for gpu just to see where it could go with such a kernel if you have time .
Click to expand...
Click to collapse
Yeah, I was thinking just about the same. I am testing right now experimental kernel with 1600 OC and some more optimizations. I may share it as experimental release soon
However, I think that Archi may add zzmoove in future, so I won't double his work [emoji14] (I am missing it too!)
I might add zen in next release though, it shouldn't be too much work. However, isn't bfq running just fine? How can you tell if zen is better than bfq?
amigoloco said:
I'm sorry if my question is stupid but is this work with rooted touchwiz kitkat 4.4.4 rom?
Click to expand...
Click to collapse
As for now: not
To my mind, it will be possible in not-far future
Hbohd said:
If you read 3rd post in this thread you will know the answer
Click to expand...
Click to collapse
i actualy read all the posts but third one. I feel like total retard haha. Thanks for answer man
voyteckst said:
Just flashed. Seems fine so far, but does it need also LMK corrections?
Sent from mobile
Click to expand...
Click to collapse
LMK permission's fix won't do any harm, therefore it's better to keep it in. Moreover it allows any apps to see and modify them.
klemen241 said:
i actualy read all the posts but third one. I feel like total retard haha. Thanks for answer man
Click to expand...
Click to collapse
Happens ! No problem at all
Wich app I Have to use to con figure the kernel?
With synapse for example which is coming with the kernel zip.
The ASV level showing on synapse, does it tell me if my chip in particular is bad? I have level 2, which is pretty bad...